290,098 ventas concretadas desde abril 2017.
011-3221-3652 
+54-911-2290-6553
MICRO-SWISS
Mostrar del 1 al 24 (de 36 productos)
Páginas de Resultados: 1 2 [Siguiente >>]
-
Precio: $87,589.00 -
Precio: $87,589.00 -
Precio: $112,009.00 -
Precio: $87,589.00
-
Precio: $87,589.00 -
Precio: $87,589.00 -
Precio: $87,589.00 -
Precio: $87,589.00
-
Precio: $87,589.00 -
Precio: $87,589.00 -
Precio: $138,889.00 -
Precio: $87,589.00
-
Precio: $87,589.00
-
Precio: $87,589.00
-
Precio: $87,589.00 -
Precio: $346,259.00
-
Precio: $356,709.00 -
Precio: $323,719.00 -
Precio: $112,009.00 -
Precio: $87,589.00
-
Precio: $87,589.00
-
Precio: $204,349.00 -
Precio: $112,009.00 -
Precio: $87,589.00
-
Precio: $87,589.00
.2mm Boquilla para Micro Swiss MK10 Kit de actualización de
-Titulo Original : .2mm Nozzle for Micro Swiss MK10 All Metal Hotend Upgrade Kit-Fabricante : MICRO-SWISS-Descripcion Original: Nozzle for Micro Swiss MK10 All Metal Hotend Kit // Nozzle Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // Upgrade for MK10 Exturders // Orifice size: .2mm // Made in USA by Micro Swiss // This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit our MK10 All Metal Hotend Kit. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle... -
Precio: $87,589.00
Kit de actualización de Boote para Micro Swiss MK10 de .8 mm
-Titulo Original : .8mm Nozzle for Micro Swiss MK10 All Metal Hotend Upgrade Kit-Fabricante : MICRO-SWISS-Descripcion Original: Nozzle for Micro Swiss MK10 All Metal Hotend Kit // Nozzle Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // Upgrade for MK10 Exturders // Orifice size: .8mm // Made in USA by Micro Swiss // This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit our MK10 All Metal Hotend Kit. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle... -
Precio: $112,009.00
Micro Swiss Plated A2 Hardend Tool Acero Boquilla RepRap 0.8
-Titulo Original : Micro Swiss Plated A2 Hardend Tool Steel Nozzle RepRap - M6 Thread 1.75mm .8mm (E3D V5 V6 / Prusa i3 MK2)-Fabricante : MICRO-SWISS-Descripcion Original: A2 Hardened Tool Steel Nozzle Plated with TwinClad XT // Fits: E3D V5-V6, Prusa i3 MK2 // 1.75mm Filament / M6 Threads // Orifice size: .8mm // Made in USA by Micro Swiss // This is RepRap style nozzle, it is made from a A2 Tool Steel, heat treated to 57-62 RC and plated with TwinClad XT coating. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle... -
Precio: $87,589.00
Boquilla MK8 resistente al desgaste con revestimiento 0.3
-Titulo Original : Micro Swiss Plated Wear Resistant Nozzle MK8 MakerBot, CraftBot, BQ Witbox, BQ Prusa I3 Hephestos .3mm (M2549-03)-Fabricante : MICRO-SWISS-Descripcion Original: Fits: MakerBot Replicator 1, 2 , 2x, Mini, z18 , CraftBot 2, CraftBot PLUS, BQ Witbox, BQ Prusa I3 Hephestos // Plated with TwinClad XT Coating // HIGH LUBRICITY WEAR RESISTANT // Orifice size: .3mm // Made in USA by Micro Swiss // This is MK8 style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
-
Precio: $87,589.00
Boquilla RepRap M6 resistente al desgaste con revest. 0.25mm
-Titulo Original : Micro Swiss Plated Wear Resistant Nozzle RepRap - M6 Thread 1.75mm .25mm (All Printers with a E3D V4 / V5 / V6 1.75 Hotend/Prusa i3 MK2 / MK2S / MK3)-Fabricante : MICRO-SWISS-Descripcion Original: Fits: E3D V5-V6 Hotend with 1.75mm Filament // Plated with TwinClad XT Coating // HIGH LUBRICITY WEAR RESISTANT // Orifice size: .25mm // Made in USA by Micro Swiss // This is RepRap style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle... -
Precio: $87,589.00
Boquilla Micro Swiss resistente al desgaste Boquilla para MK
-Titulo Original : Micro Swiss Plated Wear Resistant Nozzle for MK10 PTFE Lined Hotend .2mm-Fabricante : MICRO-SWISS-Descripcion Original: Fits: FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice Maker Select 3D Printer v2, Cocoon Create 3D Printer // For PTFE lined hotend // Plated with TwinClad XT Coating // Orifice size: .2mm // Made in USA by Micro Swiss // This is MK10 style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE codeposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle... -
Precio: $87,589.00
Boquilla Micro Swiss resistente al desgaste Boquilla .8mm
-Titulo Original : Micro Swiss Plated Wear Resistant Nozzle for E3D Volcano hotend 1.75mm .8mm-Fabricante : MICRO-SWISS-Descripcion Original: E3D Volcano Compatible Nozzle // Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // 1.75mm Filament // Orifice size: .8mm // Made in USA by Micro Swiss // This is Micro Swiss Plated Wear Resistant nozzle for E3D Volcano hotend. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE codeposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle... -
Precio: $87,589.00
Boquilla RepRap M6 resistente al desgaste con revest. 0.2mm
-Titulo Original : Micro Swiss Plated Wear Resistant Nozzle RepRap - M6 Thread 1.75mm .2mm (All Printers with a E3D V4 / V5 / V6 1.75 Hotend/Prusa i3 MK2 / MK2S / MK3)-Fabricante : MICRO-SWISS-Descripcion Original: Fits: E3D V5-V6 Hotend with 1.75mm Filament // Plated with TwinClad XT Coating // HIGH LUBRICITY WEAR RESISTANT // Orifice size: .2mm // Made in USA by Micro Swiss // This is RepRap style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
-
Precio: $87,589.00
Micro Swiss resistente al desgaste .3 mm Robo 3D Boquilla M6
-Titulo Original : Micro Swiss Plated Wear Resistant .3mm Robo 3D Nozzle - M6 Thread 1.75mm Filament Hexagon (Robo R1/R1 +Plus, Robo C2, Robo R2)-Fabricante : MICRO-SWISS-Descripcion Original: Upgrade nozzle for Robo R1/R1 +PLUS, Robo C2, Robo R2 // Nozzle Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // 1.75mm Filament // Orifice size: .3mm // Made in USA by Micro Swiss // This is Micro Swiss nozzle for Robo 3D Printers, M6 thread, 1.75mm Filament, Hexagon style hotend. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle... -
Precio: $87,589.00
Boquilla para UP resistente al desgaste con recubrimiento Mi
-Titulo Original : Micro Swiss Plated Wear Resistant nozzle for UP Box+ / UP300 / Cetus Extruder / Afinia H800+, H800 & H480-02 (.4mm)-Fabricante : MICRO-SWISS-Descripcion Original: Fits: UP Box+ / UP300 / Cetus Extruder / Afinia H800+, H800 & H480-02 // Nozzle Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // Orifice size: .4mm // Made in USA by Micro Swiss // This nozzle will fit UP Plus, UP Mini and the Up Box manufactured after March 2015. Nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle. **** Please note that this nozzle may not fit on older models of the Mini and Plus 2. **... -
Precio: $138,889.00
Micro Swiss Chapado A2 Herramienta Acero Resistente al desga
-Titulo Original : Micro Swiss Plated A2 Tool Steel Wear Resistant Nozzle for Dremel Digilab 3D45 3D Printer Idea Builder 3D Printer .8mm-Fabricante : MICRO-SWISS-Descripcion Original: A2 Hardened Tool Steel Plated with TwinClad XT // Fits: Dremel Digilab 3D45 3D Printer // 1.75mm Filament // Orifice size: .4mm // Made in USA by Micro Swiss // This nozzle is for Dremel Digilab 3D45 3D Printer, it is made from a A2 Tool Steel, heat treated to 57-62 RC and plated with TwinClad XT coating. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle... -
Precio: $87,589.00
Boquilla Micro Swiss resistente al desgaste para Boquilla (L
-Titulo Original : Micro Swiss Plated Wear Resistant Nozzle for (LulzBot TAZ 5, TAZ 6, LulzBot Mini, Hexagon Hotend) 0.2mm-Fabricante : MICRO-SWISS-Descripcion Original: Nozzle for LulzBot TAZ 5, LulzBot TAZ 6, LulzBot Mini, Hexagon Hotend // Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // 3mm Filament // Orifice size: 0.2mm // Made in USA by Micro Swiss // This is Plated Wear Resistant Nozzle for LulzBot TAZ 5, TAZ 6, LulzBot Mini, Hexagon Hotend M6 thread, 3mm Filament. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
-
Precio: $87,589.00
Boquilla Micro Swiss resistente al desgaste para LulzBot 0.8
-Titulo Original : Micro Swiss Plated Wear Resistant Nozzle for LulzBot TAZ 5, TAZ 6, LulzBot Mini, Hexagon Hotend .8mm-Fabricante : MICRO-SWISS-Descripcion Original: Nozzle for LulzBot TAZ 5, LulzBot TAZ 6, LulzBot Mini, Hexagon Hotend // Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // 3mm Filament // Orifice size: .8mm // Made in USA by Micro Swiss // This is Plated Wear Resistant Nozzle for LulzBot TAZ 5, TAZ 6, LulzBot Mini, Hexagon Hotend M6 thread, 3mm Filament. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle... -
Precio: $87,589.00
Boquilla Micro Swiss resistente al desgaste .5 mm para Robo
-Titulo Original : Micro Swiss Plated Wear Resistant Nozzle .5mm for Robo 3D - M6 Thread 1.75mm Filament Hexagon (Robo R1/R1 +Plus, Robo C2, Robo R2)-Fabricante : MICRO-SWISS-Descripcion Original: Upgrade nozzle for Robo R1/R1 +PLUS, Robo C2, Robo R2 // Nozzle Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // 1.75mm Filament // Orifice size: .5mm // Made in USA by Micro Swiss // This is Micro Swiss nozzle for Robo 3D Printers, M6 thread, 1.75mm Filament, Hexagon style hotend. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle... -
Precio: $87,589.00
Boquilla Micro Swiss resistente al desgaste para Wanhao 0.3
-Titulo Original : Micro Swiss Plated Wear Resistant Nozzle for Wanhao i3 Mini/Monoprice Mini/MP Select Mini/ProFab Mini/Malyan M200 .3mm-Fabricante : MICRO-SWISS-Descripcion Original: Fits: Wanhao i3 Mini / Monoprice Select Mini / Monoprice Mini Delta / ProFab Mini / Malyan M200 // Brass Nozzle Plated with TwinClad XT // Low Friction, High Lubricity // Orifice size: .3mm // Made in USA by Micro Swiss // This nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle... -
Precio: $346,259.00
Extrusor Metalico Para Ender 2/3/5 Crealty Cr-10 Micro Swiss
-Titulo Original : Micro Swiss All Metal Hotend Kit for Creality CR-10 / CR10 / CR10S / Ender 2 / Ender 3 Ender 5 Printers .4mm-Fabricante : Micro Swiss-Descripcion Original: Se adapta a: Creality CR-10 / CR-10S / CR-10-S5 / CR-10 MINI / CR-10-S4 / Ender 2 / Ender 3 / Ender 3 / TronXY X5S Tamaño del orificio: .4 mm El kit incluye: bloque de enfriamiento de aluminio, rotura de calor de titanio de grado 5, bloque calentador de aluminio, boquilla de 4 mm resistente al desgaste chapada en latón MK8, calcetín de silicona Este es un kit de conversión totalmente metálico para impresoras CR-10 Hecho en EE. UU. Por Micro Swis...
-
Precio: $356,709.00
Micro Swiss All Metal Hotend Kit for Creality CR-10s PRO
-Titulo Original : Micro Swiss All Metal Hotend Kit for Creality CR-10s PRO/CR-10 Max -Fabricante : Micro Swiss-Descripcion Original: Este estuche es compatible con el modelo de tableta de lanzamiento 2019 Samsung Galaxy Tab S6 de 10.5 pulgadas SM-T860 (Wi-Fi) / SM-T865 (LTE) / SM-T867 (Verizon / T-Mobile / Sprint). NO funcionará para Samsung Galaxy Tab S5e 2019 / Samsung Galaxy Tab S4 10.5 2018, o cualquier otro modelo de dispositivo Teclado de estilo portátil duro real con material ABS de alta gama. Teclado de silicona no barato como otros casos en el mercado. Un mecanismo de resorte debajo de cada tecla garantiza una respuesta táctil con cada golpe, lo que le ayuda a escribir más rápido y con menos errores que en una pantalla táctil El teclado Bluetooth extraíble se integra perfectamente con su tableta Galaxy Tab S6 de 10.5 y otros dispositivos habilitados para Bluetooth Estuche de cuero sintético de primera calidad con interior de microfibra suave que no raya. Evite las huellas dactilares, la suciedad y los arañazos Admite la carga magnética e inalámbrica completamente nueva del S Pen cuando el estuche está encendido. Disponible en una variedad de colores brillantes y divertidos... -
Precio: $323,719.00
Micro Swiss All Metal Hotend Bloque Enfriamiento Zortrax M20
-Titulo Original : Micro Swiss All Metal Hotend Kit With Slotted Cooling Block For Zortrax M200, M300 .4mm-Fabricante : Micro-Swiss-Descripcion Original: - Fits: Zortrax M200, Zortrax M300 - Nozzle is Plated with TwinClad XT Coating - Kit includes: .4mm Brass Plated Wear Resistant Nozzle, Thermal Tube, Slotted Cooling Block, Custom screw, Allen Wrench - Orifice size: .4mm - Made in USA by Micro Swiss This is Micro Swiss All Metal Hotend kit for Zortrax M200. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion (cold end) because it has much better thermal conductivity, to carry away any heat from the filament into the cooling block. All metal hotend will let you print at much higher temperature than possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesnt have enough thermal conductivity to properly melt all the plastic coming out. On original extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length... -
Precio: $112,009.00
Micro Swiss MK8 Chapado A2 Herramienta de acero 0.4
-Titulo Original : Micro Swiss MK8 Plated A2 Tool Steel Wear Resistant Nozzle (MakerBot, CraftBot, Creality CR10, Tevo Tornado) .4mm-Fabricante : MICRO-SWISS-Descripcion Original: A2 Hardened Tool Steel Plated with TwinClad XT // Fits: MK8 Extruders, Creality CR-10, Tevo Tornado, MakerBot, CraftBot, BQ Witbox // 1.75mm Filament // Orifice size: .4mm // Made in USA by Micro Swiss // This is MK8 style nozzle, it is made from a A2 Tool Steel, heat treated to 57-62 RC and plated with TwinClad XT coating. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle... -
Precio: $87,589.00
Boquilla Micro Swiss Plated para LulzBot TAZ 5 LulzBot Mini
-Titulo Original : Micro Swiss Plated Nozzle for LulzBot TAZ 5, LulzBot Mini, Hexagon Hotend Style .5mm-Fabricante : MICRO-SWISS-Descripcion Original: Nozzle for LulzBot TAZ 5, LulzBot Mini, Hexagon hotend // Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // Upgrade // Orifice size: .5mm // Made in USA by Micro Swiss // Micro Swiss plated nozzle for LulzBot, M6 thread, 3mm Filament, Hexagon hotend. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
-
Precio: $87,589.00
Micro Swiss MK10 Chapado resistente al desgaste Boquilla par
-Titulo Original : Micro Swiss MK10 Plated Wear Resistant Nozzle for PTFE Lined Hotend M7 Threads 1.75 mm, 0.4mm (Flash Forge/Dremel/Wanhao)-Fabricante : MICRO-SWISS-Descripcion Original: USA made Micro-Swiss Plated Brass Wear Resistant Nozzles extend nozzle life dramatically when using abrasive materials. // Ultra-hard coating creates a low friction nozzle that outlasts uncoated brass. Brass base material retains thermal conductivity for unchanged thermal performance. // Fit a large variety of machines, check listing name carefully to make sure it fits your printer, or get in touch with us if you are unsure. // Color: Easy upgrade for trouble-free printing of hard composites! Our Plated Brass Wear Resistant Nozzles are made from brass for good thermal conductivity and plated with an extremely hard high lubricity coating. The coating increases the life of the nozzle significantly. We have yet to wear out a nozzle! With normal brass nozzles noticeable wear can occur after as little as 500g of Stainless Steel material. Currently available in: 1. MK8 Style (M6 Threads compatible with most Makerbot style machines including the Replicator 1, 2, 2x, 5th gen, Mini & Z18) in 0. 4mm & 0. 6mm diameter orifices - 1. 75mm filament only. 2. MK10 Style (M7 Threads for newer Flash-Forge, Dremel & Wanhao) in 0. 4mm & 0. 6mm diameter orifices - 1. 75mm filament only. 3. Modified MK8 RepRap Style (M6 Threads compatible with E3D (including BigBox), Hexagon (newer Lulzbot & Robo3D) & Ultimakers upgraded with an Olsson block) for 1. 75mm & 2. 85mm filament diameter in 0. 4mm, 0. 6mm & 0. 8mm diameter orifices. 4. Printrbot Ubis Style (for all Printrbots W/O all metal upgrade) in 0. 4mm & 0. 6mm diameter orifices (ignore 0. 2mm marking. . . long story) - 1. 75mm filament only. 5. Afinia/UP! /Zortrax Style in 0. 4mm & 1. 75mm filament only. Larger diameters require more parameter modification, but have slightly more consistent extrusion & increased life over 0. 4mm. Custom manufactured for ProtoPlant, makers of Proto-pasta in the USA by Micro Swiss. contact Proto-pasta for more information... -
Precio: $204,349.00
Micro Swiss Mk10 Todo El Kit De Metal Hotend .4mm Boquilla W
-Titulo Original : Micro Swiss MK10 All Metal Hotend Kit .4mm Nozzle WANHAO, FlashForge, Dremel Idea Builder-Fabricante : MICRO-SWISS-Descripcion Original: Fits: FlashForge Creator Pro / FlashForge Creator X / FlashForge Dreamer / QIDI TECH I / Dremel Idea Builder / PowerSpec 3D Pro / PowerSpec 3D X / PowerSpec Ultra 3D Printer / Wanhao Duplicator 4S / Wanhao Duplicator 4X / Wanhao i3 / Monoprice Maker Select 3D Printer v2 / Cocoon Create 3D Print // Kit Includes: 1 Plated Brass Wear Resistant Nozzle / 1 Thermal tube / 1 Thermal compound // This is a Drop in All Metal Conversion Kit for MK10 Extruders // Made in USA by Micro Swiss // This is an all metal hotend upgrade kit for MK 10 style extruders. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature than possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn't have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length. 1 Plated Brass Wear Resistant Nozzle 1 Thermal tube 1 Thermal compound FlashForge Creator Pro FlashForge Creator X FlashForge Dreamer QIDI TECH I Dremel Idea Builder PowerSpec 3D Pro PowerSpec 3D X PowerSpec Ultra 3D Printer Wanhao Duplicator 4S Wanhao Duplicator 4X Wanhao i3 Monoprice Maker Select 3D Printer v2 Cocoon Create 3D Prin... -
Precio: $112,009.00
Micro Swiss MK8 Chapado A2 Herramienta de acero 0.8
-Titulo Original : Micro Swiss MK8 Plated A2 Tool Steel Wear Resistant Nozzle (MakerBot, CraftBot, Creality CR10, Tevo Tornado) .8mm-Fabricante : MICRO-SWISS-Descripcion Original: A2 Hardened Tool Steel Plated with TwinClad XT // Fits: MK8 Extruders, Creality CR-10, Tevo Tornado, MakerBot, CraftBot, BQ Witbox // 1.75mm Filament // Orifice size: .8mm // Made in USA by Micro Swiss // This is MK8 style nozzle, it is made from a A2 Tool Steel, heat treated to 57-62 RC and plated with TwinClad XT coating. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle... -
Precio: $87,589.00
Boquilla RepRap M6 resistente al desgaste con revest. 0.4mm
-Titulo Original : Micro Swiss Plated Wear Resistant Nozzle RepRap - M6 Thread 1.75mm .4mm (All Printers with a E3D V4 / V5 / V6 1.75 Hotend/Prusa i3 MK2 / MK2S / MK3)-Fabricante : MICRO-SWISS-Descripcion Original: USA made Micro-Swiss Plated Brass Wear Resistant Nozzles extend nozzle life dramatically when using abrasive materials. // Ultra-hard coating creates a low friction nozzle that outlasts uncoated brass. Brass base material retains thermal conductivity for unchanged thermal performance. // Fit a large variety of machines, check listing name carefully to make sure it fits your printer, or get in touch with us if you are unsure. // This is RepRap style nozzle, it is made from a 360 brass base material and plated with Twin Clad XT coating. Twin Clad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle. *M6 Thread for 1. 75mm filament diameter Made in USA by Micro Swiss Fits All printers with a E3D V4 / V5 / V6 1. 75 Hot end Prusa i3 MK2 / MK2S / MK3 Any cubi...
Mostrar del 1 al 24 (de 36 productos)
Páginas de Resultados: 1 2 [Siguiente >>]
-
destacado
Pentel Ain Stein 160 Minas (4 Tubos) 0.5mm B 2B 3B 4B
Precio: $61,809.00-Titulo Original : Pentel Ain Stein Mechanical Pencil Lead, 0.5mm B,2B,3B,4B (40 Lead... -
destacado
Repuesto iRobot Roomba 500 - 12 filtros xsr
Precio: $66,749.00-Titulo Original : Neutop 12-Pack Yellow Filter Kit Replacement for iRobot Roomba 50... -
destacado
1tb Ssd Nand M.2 2280 Pcie Nvme Samsung 970 Evo
Precio: $613,369.00-Titulo Original : Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND Internal Sol... -
destacado
Bateria : Beats Studio 2.0
Precio: $104,779.00-Titulo Original : Bateria : Cameron Sino AEC643333 Wireless Headset Battery for Beat... -
destacado
Book : Harry Potter and the Prisoner of Azkaban –.. (6228)
Precio: $211,659.00-Titulo Original : Harry Potter And The Prisoner Of Azkaban - Slytherin Edition-Fabri... -
destacado
Vidrio Templado HTC U Ultra Anti Scratch Bu [3un] (1NBYIX5G)
![Vidrio Templado HTC U Ultra Anti Scratch Bu [3un] (1NBYIX5G)](https://images-na.ssl-images-amazon.com/images/I/61pqJDVyN8L.jpg "Vidrio Templado HTC U Ultra Anti Scratch Bu [3un] (1NBYIX5G)")
Precio: $59,209.00-Titulo Original : (3 Pack) Supershieldz for HTC U Ultra Tempered Glass Screen Protec...
Contáctenos
- el bazar digital.com SRL
- 011 - 3221-3652
- info@elbazardigital.com
- +54 9 11 2290-6553
