290,394 ventas concretadas desde abril 2017.
011-3221-3652 
+54-911-2290-6553
Impresión > Impresión 3D > Picos Nozzle
-
Precio: $173,509.00 -
Expira:
26/01/2024Precio: $46,549.00 -
Precio: $112,009.00 -
Precio: $97,349.00
-
Precio: $61,939.00 -
Precio: $87,589.00 -
Precio: $47,799.00 -
Precio: $432,169.00
-
Precio: $104,569.00 -
Precio: $56,959.00 -
Precio: $59,999.00 -
Precio: $138,429.00
-
Precio: $87,589.00 -
Precio: $54,049.00 -
Precio: $61,939.00 -
Precio: $87,589.00
-
Expira:
03/07/2023Precio: $45,549.00 -
Precio: $138,889.00 -
Precio: $87,589.00 -
Precio: $65,039.00
-
Expira:
26/03/2023Precio: $43,979.00 -
Precio: $135,929.00
-
Precio: $66,139.00 -
Precio: $87,589.00
-
Precio: $173,509.00
Herramienta para acabado, limpieza, escarificador imp 3D USB
-Titulo Original : KINGTOOL 3D Printer Accessories Tool Kit, 3D Printing/Modify Finishing Tool, Cleaning Needle, Scarper, and USB Power Cord (Ultramarine)-Fabricante : KINGTOOL-Descripcion Original: Con 7 puntas intercambiables, cepillo de limpieza Longitud del cable USB: 1,2 m (120 cm) Potencia: 8 W por cada punta Diseñado para terminar, reparar y modificar piezas impresas en 3D Funciona con materiales plásticos de impresión 3... -
Precio: $46,549.00Expira: 26/01/2024
Impresora 3D Boquilla Aokin 16 un. Printer 3D M6 0.2mm 0.3mm
-Titulo Original : 3D Printer Nozzles, Aokin 16 PCS M6 3D Printer 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm Extruder Brass Nozzle Print Head for E3D Makerbot-Fabricante : AOKIN-Descripcion Original: Compatibility: fit for 3D printers that use the E3D V6 (M6 thread), work well with Monoprice select mini, V5 V6, Prusa i3, Anet 8, Anycubic i3 mega etc. // Package include: totally 16 pcs E3D V5 V6 nozzle, 7 sizes: 2 x 0.2mm, 2 x 0.3mm, 4 x 0.4mm, 2 x 0.5mm, 2 x 0.6mm, 2 x 0.8mm, 2 x 1.0mm. // Size: the 3D printer nozzles, Out Thread: M6, Filament Diameter: 1.75mm, Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm. // Material: the 3D printer nozzles are made of premium brass, sturdy and high temperature resistance, smooth silk, connect with M6 out thread, easy to use. // Aokin 3D printer nozzles use high quality raw materials and fine workmanship, if you have any question for our product, please feel free to contact us, we will do our best for you. // 2x 0.2mm 3D printer nozzles2x 0.3mm 3D printer nozzles4x 0.4mm 3D printer nozzles2x 0.5mm 3D printer nozzles2x 0.6mm 3D printer nozzles2x 0.8mm 3D printer nozzles2x 1.0mm 3D printer nozzlesMaterial: BrassOut Thread: M6Filament Diameter: 1.75mmOutput Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mmCompatibility: fit for 3D printers that use the E3D V6 (M6 thread), work well with Monoprice select mini, V5 V6, Prusa i3, Anet 8, Anycubic i3 mega etc. 1、After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.2、Small accessories, please keep away from children... -
Precio: $112,009.00
Micro Swiss Boquilla Para Mk10 Kit De Metal Totalmente Resis
-Titulo Original : Micro Swiss Nozzle for MK10 All Metal Hotend Kit ONLY (Plated A2 Hardened Tool Steel) .4mm-Fabricante : MICRO-SWISS-Descripcion Original: Fits: Micro Swiss MK10 All Metal Hotend Kit ONLY (M7 Threads) // A2 Hardened Tool Steel Plated with TwinClad XT // WEAR RESISTANT // Orifice size: .4mm // Made in USA by Micro Swiss // This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit our MK10 All Metal Hotend Kit. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube. It is made from a A2 Steel, heat treated to 57-62 RC and plated with TwinClad XT coating. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle. Orifice size: .4m... -
Precio: $97,349.00
5 Boquillas Extrusora MK-HF 3D 0.25/0.4/0.6/0.8mm
-Titulo Original : Creality Official 3D Printer Parts MK-HF Nozzle Kit 0.25/0.4/0.6/0.8mm 5PCS/Set For Ender-3 Series 3D Printer-Fabricante : Creality 3D-Descripcion Original: - 100 % original de Creality: las boquillas MK HF están hechas de material de aleación de cobre de alta calidad. Dureza triple que el material de latón, fácil de instalar y cambiar. - Potencia suficiente para imprimir filamentos de alta temperatura: resuelve el problema del calentamiento rápido y la impresión continua de filamentos de alta temperatura con una vida útil prolongada. - Ampliamente compatible: Funciona con la mayoría de materiales de impresión FDM como PLA, ABS, PTEG, TPE, TPU, PC, etc. y filamentos de alta temperatura como PEEK, PEKK, PEI, PSU, PPSU, etc. También compatible con Ender-3 S1, Ender-3 S1 Pro, Sermoon D1, Sermoon V1, CR-10 Smart Pro, Ender 3 Series, Ender 5 Series y CR-10 Series. - El paquete incluye -- Juego de boquillas MK-HF de 5 piezas, 0,25 mm x 1, 0,4 mm x 2, 0,6 mm x 1, 0,8 mm x 1...
-
Precio: $61,939.00
2 un. Printer 3D M6 Bronce V6 Boquilla 3.0mm para V5 V6 Hote
-Titulo Original : 2pcs 3D Printer M6 Brass V6 Nozzle 3.0mm for V5 V6 Hotend, Titan Aero extruder, Ultimaker 2+ Extended Olsson Block Hotend (2pcs 0.4mm)-Fabricante : POLISI3D-Descripcion Original: The nozzle size may be marked with Dot's quantity, Or Marked with number, please know before ordering // Nozzle size: 0.2mm, 0.4mm, 0.6mm. 0.8mm // Compatitable with V6 V5 hotend, Ultimaker 2+ olsson block hotend // This nozzle has very high quality, the hole is central and round completely. // Use best brass material and drilled with high precision CNC machines // Size: Nozzle size: 0.2mm, 0.4mm, 0.6mm. 0.8mm, Filament size: 3.0mm Material: Brass thread: M6 Nozzle size with dot: 0.2 (0.2 number); 0.4(3 dots Or 0.4 number); 0.6(4 dots Or 0.6 Number); 0.8 (5 dots Or 0.8 number... -
Precio: $87,589.00
Boquilla Micro Swiss Plated para LulzBot TAZ 5 LulzBot Mini
-Titulo Original : Micro Swiss Plated Nozzle for LulzBot TAZ 5, LulzBot Mini, Hexagon Hotend Style .5mm-Fabricante : MICRO-SWISS-Descripcion Original: Nozzle for LulzBot TAZ 5, LulzBot Mini, Hexagon hotend // Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // Upgrade // Orifice size: .5mm // Made in USA by Micro Swiss // Micro Swiss plated nozzle for LulzBot, M6 thread, 3mm Filament, Hexagon hotend. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle... -
Precio: $47,799.00
Set 16 Nozzles mk8 Para Impresora 3d +5 Agujas De Limpieza
-Titulo Original : Aokin 16 Pcs 3D Printer Nozzles MK8 Extruder Nozzles 0.2/0.3/0.4/0.5/0.6/0.8/1.0mm And 5 Pcs 0.2/0.3/0.4/0.5/0.6mm Nozzle Cleaning Needles For Creality Ender 3/3 Pro/3 V2, Ender 5/5 Pro, CR-10/10S-Fabricante : Aokin-Descripcion Original: - Compatibilidad: las boquillas MK8 se ajustan a Creality Ender 3/3 Pro, Ender 3 V2, Ender 5/5 Pro, CR-10/10S, Makerbot MK8, Reprap Prusa I3, Tevo Tarantula, Anet A8 y otras impresoras 3D. - El paquete incluye: 16 boquillas extrusoras MK8, 7 tamaños: 2x0,2 mm, 2x0,3 mm, 4x0,4 mm, 2x0,5 mm, 2x0,6 mm, 2x0,8 mm, 2x1,0 mm. 1 pieza de agujas de limpieza de 0,2/0,3/0,4/0,5/0,6 mm, un total de 5 piezas de agujas de limpieza de boquillas de impresora 3D en una botella. - Boquillas: hechas de latón de primera calidad, resistentes y resistentes a altas temperaturas, seda suave, conexión con rosca M6, fácil de usar. Rosca de salida de las boquillas: M6, diámetro del filamento: 1,75 mm, diámetro de salida: 0,2/0,3/0,4/0,5/0,6/0,8/1,0 mm. - Agujas de limpieza de boquillas: hechas de material de acero inoxidable de alta calidad, resistentes, duraderas y flexibles, fáciles de doblar pero sin romper. Apto para la mayoría de los tamaños de boquillas de impresora 3D, también se puede usar para limpiar otras piezas pequeñas, como la garganta y los engranajes de alimentación. El paquete incluye: 2 boquillas extrusoras MK8 para impresora 3D de 0,2 mm 2 boquillas extrusoras MK8 para impresora 3D de 0,3 mm 4 boquillas extrusoras MK8 para impresora 3D de 0,4 mm 2 boquillas extrusoras MK8 para impresora 3D de 0,5 mm 2 boquillas extrusoras MK8 para impresora 3D de 0,6 mm 2 x Boquilla extrusora MK8 de impresora 3D de 0,8 mm 2 boquillas extrusoras MK8 de impresora 3D de 1,0 mm 1 set agujas de limpieza de 0,2/0,3/0,4/0,5/0,6 mm, total 5 agujas de limpieza de boquillas de impresora 3D en una botella. Compatible: impresora 3D con rosca M6 externa hotend estilo MK8, como Creality Ender 3/3 Pro, Ender 3 V2, Ender 5/5 Pro, CR-10/10S, Makerbot MK8, Reprap Prusa I3, Tevo Tarantula, Anet A8 y otras impresoras 3D. Nota: No use las agujas para limpiar hasta que la boquilla se caliente a más de 200 grados. Después de reemplazar la boquilla, vuelva a calibrar la distancia entre la boquilla y la placa de construcción para garantizar la calidad de las piezas de impresión... -
Precio: $432,169.00
Impresora 3D de tungsteno M6 Boquilla extrusora, 0.8 mm de d
-Titulo Original : Tungsten 3D Printer M6 Extruder Nozzle, 0.8mm Diameter-Fabricante : Midwest Tungsten Service-Descripcion Original: LONG LASTING and durable tungsten alloy 3D printer nozzle stands up to the most abrasive filler materials SIZE: M6 extruder nozzle has a 0.8mm orifice diameter and is compatible with a wide variety of printer setups QUALITY designed tungsten alloy material significantly reduces wear over time SAFE and easy to use: tungsten alloy is completely non-toxic. Simply swap out your current nozzle and start printing UNITED STATES based manufacturing & customer service staff are here to help yo...
-
Precio: $104,569.00
Boquilla De Acero Endurecido E3d Genuino V6 (1.75 Mm) 0.40 M
-Titulo Original : Genuine E3D Hardened Steel Nozzle V6 (1.75mm) 0.40mm (V6-NOZZLE-HS-175-400)-Fabricante : E3D-Descripcion Original: Input Diameter :1.75mm // Output Diameter: 0.2mm,0.4mm,0.4mm.0.6mm.0.8mm,1.0mm // Material: Copper (Brass) // 10Pcs Extruder Brass Nozzle // 5 different size (each size 2pcs) // Specification:13mm*6mm Material: Brass of National standard Weight:2g Nozzle Precision:0.2mm/0.4mm/0.6mm/0.8mm/1.0mm Hexagon Diameter：6mm Screw Thread :M6 Input Diameter: 1.75mm Package Included: 10x nozzles Size:0.2mm,0.4mm,0.6mm,0.8mm,1.0mm Each size 2pc... -
Precio: $56,959.00
10 Boquillas De Impresora 3d Mk8 0.8mm Para Ender 3 Creality
-Titulo Original : 0.8MM MK8 Ender 3 Nozzles 10 Pcs 3D Printer Brass Nozzles Extruder For Makerbot Creality CR-10 With 3 Needles And Metal Storage Box (0.8mm)-Fabricante : Meafeng-Descripcion Original: - Parámetros y especificaciones: diámetro de entrada 2,00 mm, diámetro de salida 0,8 mm, rosca exterior M6, longitud de rosca 4 mm; Un juego de 10 boquillas para impresora y 3 agujas de acero inoxidable. Y la superficie exterior está marcada con un tamaño, para que puedas identificar fácilmente las especificaciones de la boquilla. - Aplicabilidad y compatibilidad: nuestras boquillas son aptas para impresoras 3D Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatibles con todas las impresoras 3D PLA ABS de 1,75 mm. Encaja exactamente como el original. - Proceso de precisión: fabricado con torno automático de precisión CNC de centrado y tecnología de conformado de una sola vez, asegúrese de que los orificios de entrada y salida sean concéntricos y que el interior de la boquilla sea liso y sin rebabas. Debido a todo lo anterior, no solo reduce la resistencia, evita que el filamento se atasque en la boquilla, sino que también garantiza efectivamente la vida útil de la boquilla y hace que el filamento sea más suave. - Diseño preciso: al cortar con la cuchilla de diamante, la superficie de contacto es más plana, lo que reduce en gran medida el riesgo de fugas del cabezal de impresión y evita la obstrucción de las boquillas. - ¡Cada uno de nuestros kits solo viene en un tamaño único, por lo que puedes mezclar y combinar libremente... -
Precio: $59,999.00
22 Boquillas Mk8 Extrusoras De Impresora 3d
-Titulo Original : 22PCS MK8 Nozzles 3D Printer Extruder Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm With 10PCS Cleaning Needles And Wrench For Makerbot Creality CR-10 Ender 3 5-Fabricante : EXCELFU-Descripcion Original: - Parámetro: Diámetro de entrada 1,75 mm; diámetro de salida 0,2 mm, 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm, 1,0 mm; Hilo de salida: M6 - Agujas de limpieza adicionales: las agujas de limpieza de la boquilla son muy flexibles y robustas, fáciles de doblar en la boquilla y no se rompen. Perfecto para manejar obstrucciones difíciles en la boquilla del extremo caliente de la extrusora - Material Premium: Nuestras boquillas extrusoras MK8 están hechas de material de latón de alta calidad. Resistente y duradero para usar durante mucho tiempo. Fácil de instalar y cambiar. - Aplicabilidad y compatibilidad: estas boquillas extrusoras MK8 se ajustan a la impresora 3D Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatibles con todas las impresoras 3D PLA ABS de 1,75 mm. Ajuste exactamente como el original - El paquete incluye: viene con 22 boquillas MK8 en 7 tamaños (cantidad x diámetro de salida): 2x 0,2 mm, 2x 0,3 mm, 10x 0,4 mm, 2x 0,5 mm, 2x 0,6 mm, 2x 0,8 mm, 2x 1,0 mm, con 10PCS Agujas de limpieza y 1 llave de boquilla EXCELFU 22PCS MK8 Boquillas Boquillas extrusoras de impresora 3D 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm, 1.0 mm con 10PCS Agujas de limpieza y llave para Makerbot Creality CR-10 Ender 3 5 Especificación Material: latón Rosca exterior: M6 Diámetro de entrada: 1,75 mm Diámetro de salida: 0,2 mm, 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm, 1,0 mm El paquete incluye 2 boquillas de impresora 3D de 0,2 mm 2 boquillas de impresora 3D de 0,3 mm 10 boquillas 3D de 0,4 mm Boquillas de impresora 2 boquillas de impresora 3D de 0,5 mm 2 boquillas de impresora 3D de 0,6 mm 2 boquillas de impresora 3D de 0,8 mm 2 boquillas de impresora 3D de 1,0 mm 10 agujas de limpieza de boquilla 1 llave de boquilla Atención Estas boquillas extrusoras MK8 de impresora 3D son piezas pequeñas, manténgalos alejados de los niños para evitar el riesgo de tragar... -
Precio: $138,429.00
4 Boquillas Laton (brass) Mk10 0.4 Mm Impresora 3d
-Titulo Original : PrimaCreator PC-NVP-04Bx4-MK10 MK10 Brass Nozzle 0,4 mm-Fabricante : PRIMACREATOR-Descripcion Original: Premium high-quality nozzle for perfect prints “ not to be compared with cheap Chinese nozzles made of low end material in old worn machinery. We only use the best // Manufactured with extreme precession tolerance of only 0.01 mm. Quality is controlled in every step of production to ensure a 100 percent perfect nozzle. Each nozzle is cleaned in ultrasonic bath // Brass nozzle is the perfect choice for pla, abs and petg prints. Brass have superb thermal conductivity to ensure stable printer temperature // Mk10 style nozzle with M7 thread for 1.75Mm filaments fits printers like wanhao I3, I3 plus, D4, D6, qiditech, flash forge dreamer, creator, finder, monoprice maker select, cocoon create, etc.¦ // What you get: 4 x 0.40Mm - Mk10 brass nozzle // Fits to: Wanhao I3, D4, D6, qidi tech, Flash Forge dreamer, creator, Finder, monoprice Maker Select, cocoon create, qidi tech the premium nozzles from PrimaCreator are a Series of replacement nozzles that can make more difference for the result than you may Think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. All nozzles from PrimaCreator are made from the best high-quality Brass or steel (depending on Type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints. For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it's time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don´t get the same results. After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation. The nozzle will now take shape with millimeter precision, the tolerance is less than 0.01 mm. The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. The nozzles are then checked for one last time and packed individually in a protective box “ ready to be shipped to you...
-
Precio: $87,589.00
Boquilla MK8 resistente al desgaste con revestimiento 0.2
-Titulo Original : Micro Swiss Plated Wear Resistant Nozzle MK8 MakerBot, CraftBot, BQ Witbox, BQ Prusa I3 Hephestos .2mm (M2549-02)-Fabricante : MICRO-SWISS-Descripcion Original: Fits: MakerBot Replicator 1, 2 , 2x, Mini, z18, CraftBot 2, CraftBot PLUS, BQ Witbox, BQ Prusa I3 Hephestos // Plated with TwinClad XT Coating // HIGH LUBRICITY WEAR RESISTANT // Orifice size: .2mm // Made in USA by Micro Swiss // This is MK8 style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle... -
Precio: $54,049.00
2 Boquillas de impresora 3D CR-10S PRO V2 M6x0.75mm (0.4mm)
-Titulo Original : 2pcs CR-10S PRO V2 Upgrade 3D Printer Plated Wear Resistant Nozzle M6x0.75mm Threads Brass Nozzle 0.4mm Only For Creality CR-10S Pro And CR-10 MAX Original Hotend 3D Printer-Fabricante : POLISI3D-Descripcion Original: Tamaño de la boquilla: 0,4 mm, M6x0,75 mm Rosca de paso para uso de filamento de 1,75 mm El material de la boquilla es latón para mantener una buena conductividad térmica, el revestimiento de níquel puede aumentar la vida útil de la boquilla y evitar la oxidación de la superficie de la boquilla. El niquelado tiene una alta dureza y resistencia al desgaste, aplicar niquelado en la superficie de la boquilla puede reducir la fricción, para que sea más suave al introducir el filamento Se calienta: solo se utiliza para la impresora 3D de hotend original Creality CR-10S Pro / CR-10S PRO V2 / / CR-10 MAX Paquete: 2 boquillas de 0,4 mm. ... -
Precio: $61,939.00
Impresora 3D Boquilla Kit de Limpieza Kit 0.4mm 0.35mm Aguja
-Titulo Original : 3D Printer Nozzle Cleaning Tool Kit - 0.4mm 0.35mm Needles Tweezers Filament Clog Cleaner Accessories Part Drill Bits 27pcs Mika3D-Fabricante : MIKA3D-Descripcion Original: Great Value: Total 27pcs include: 12pcs 0.4mm stainless steel needles,12pcs 0.35mm copper needles, 2pcs different shape precise tweezers, 1pc plastic bottle, Excellently cleaning 3d printer filament clog // Good Performance Needles: The Needles are flexible, won't break, twist easily, this drill bits will clean your printer nozzles and other small parts: throat, feeder gear perfectly // High Quality Tweezers: It include 2 different shape of precise tweezers, great for nozzle maintenance, cleaning up extruder hot ends and cleaning excess support material (PLA/ABS filament). // Wide Compatible: Widely Compatible with most of 3d printers extruder nozzles from market, E3D, MK8, MK10,etc // Good Package and Warranty: All of 26pcs packed in one safe handy bottle,We are Confident about Product Quality,Within 12 hours response,100% Satisfaction Guarantee //... -
Precio: $87,589.00
Micro Boquilla suiza resistente al desgaste Boquilla para Cr
-Titulo Original : Micro Swiss Plated Wear Resistant Nozzle for Creality CR-10s PRO Original hotend ONLY (M6x.75mm Threads) .6mm-Fabricante : MICRO-SWISS-Descripcion Original: Fits: CR-10S PRO Original Hotend // Orifice size: .6mm // M6x.75mm Threads // Plated with TwinClad XT Coating // Made in USA by Micro Swiss // This is Plated Wear Resistant Nozzle for Creality CR-10s PRO Original hotend only. It has fine M6x.75mm threads. Nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. The TwinClad XT coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle. CR-10 Pro CR-10S Pro...
-
Precio: $45,549.00Expira: 03/07/2023
Kit x30 Pico Nozzle de impresora 3D Varios diámetros
-Titulo Original : 30PCS 3D Printer Nozzles, High Temperature&Wear Resistance, Better Thermal Conductivity Brass 3D Printer Nozzle 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm For MK8, Ender 3, Creality CR10 LAIHIFA-Fabricante : LAIHIFA-Descripcion Original: - GRAN VALOR: 30 boquillas de impresora 3D en 7 tamaños. 0,2 mm x 4, 0,3 mm x 4, 0,4 mm x 6, 0,5 mm x 4, 0,6 mm x 4, 0,8 mm x 4, 1,0 mm x 4: cantidad suficiente y gran surtido para todas sus necesidades. 5 agujas de limpieza gratis para limpiar las boquillas de la extrusora. 1 llave gratis para instalar y cambiar las boquillas de la impresora 3D. - SÚPER DURADERO: las boquillas de la impresora 3D están hechas de latón estándar internacional de alta calidad que tiene una mejor conductividad térmica, resistencia a altas temperaturas, resistencia a la abrasión. Es duradero de usar durante mucho tiempo. - CALIDAD PREMIUM: las boquillas de impresora 3D de latón de alta calidad vienen con superficies lisas y un acabado interior aparentemente liso, alta precisión y apertura perfecta, por lo que pueden evitar fugas en el cabezal de impresión y permitir un flujo fácil del filamento sin obstrucciones. - COMPATIBILIDAD UNIVERSAL: Las boquillas del extrusor 3D son compatibles con la mayoría de las impresoras 3D PLA ABS de 1,75 mm con rosca externa M6 del mercado, aptas para impresoras 3D como Makerbot MK8, Creality CR10, Ender 3, etc. - ESPECIFICACIÓN: el diámetro de entrada de la boquilla de la impresora 3D es de 2 mm, los diámetros de salida son de 0,2 mm, 0,3 mm, 0,4 mm, 0,5 mm, 0,6 mm, 0,8 mm, 1,0 mm, la rosca de salida es M6, la longitud de la rosca es de 5 mm. La superficie exterior de las boquillas está grabada con un tamaño, conveniente para que pueda encontrarlas y reemplazarlas fácilmente... -
Precio: $138,889.00
Micro Swiss Chapado A2 Herramienta Acero Resistente al desga
-Titulo Original : Micro Swiss Plated A2 Tool Steel Wear Resistant Nozzle for Dremel Digilab 3D45 3D Printer Idea Builder 3D Printer .8mm-Fabricante : MICRO-SWISS-Descripcion Original: A2 Hardened Tool Steel Plated with TwinClad XT // Fits: Dremel Digilab 3D45 3D Printer // 1.75mm Filament // Orifice size: .4mm // Made in USA by Micro Swiss // This nozzle is for Dremel Digilab 3D45 3D Printer, it is made from a A2 Tool Steel, heat treated to 57-62 RC and plated with TwinClad XT coating. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle... -
Precio: $87,589.00
Boquilla RepRap M6 resistente al desgaste con revest. 0.4mm
-Titulo Original : Micro Swiss Plated Wear Resistant Nozzle RepRap - M6 Thread 1.75mm .4mm (All Printers with a E3D V4 / V5 / V6 1.75 Hotend/Prusa i3 MK2 / MK2S / MK3)-Fabricante : MICRO-SWISS-Descripcion Original: USA made Micro-Swiss Plated Brass Wear Resistant Nozzles extend nozzle life dramatically when using abrasive materials. // Ultra-hard coating creates a low friction nozzle that outlasts uncoated brass. Brass base material retains thermal conductivity for unchanged thermal performance. // Fit a large variety of machines, check listing name carefully to make sure it fits your printer, or get in touch with us if you are unsure. // This is RepRap style nozzle, it is made from a 360 brass base material and plated with Twin Clad XT coating. Twin Clad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle. *M6 Thread for 1. 75mm filament diameter Made in USA by Micro Swiss Fits All printers with a E3D V4 / V5 / V6 1. 75 Hot end Prusa i3 MK2 / MK2S / MK3 Any cubi... -
Precio: $65,039.00
3 calcetines de silicona de alta temperatura para Ender 3 S1
-Titulo Original : 3-Pack Silicone Cover Socks 300C High Temperature Compatible With Creality Sprite Extruder Heater Block, Ender 3 S1, Ender3 S1 Pro, CR10 Smart Pro, Sermoon V1 3D Printer (Silicone Sock)-Fabricante : POLISI3D-Descripcion Original: - Como puede ver, nuestro calcetín de silicona tiene un tratamiento de bordes muy bueno, la pared exterior es muy recta y los bordes son perfectos - Solo compatible con impresoras 3D FDM equipadas con extrusor sprite o kit extrusor sprite pro, como Ender 3 S1, Ender3 S1 Pro, CR10 Smart Pro, Sermoon V1 y Sermoon V1 Pro Bloque calentador de impresora 3D -Hecho de material de silicona de alta temperatura, puede funcionar durante mucho tiempo a 300C grados. Pero TENGA EN CUENTA que si la temperatura de impresión supera los 300 ° C, retire la cubierta de silicona antes de comenzar a imprimir. - Tamaño de alta precisión, se puede ensamblar más perfectamente y es muy hermoso. - Paquete: 3 fundas de silicona. SOLO compatible con impresoras 3D FDM equipadas con extrusor sprite o kit extrusor sprite pro, como Ender 3 S1, Ender3 S1 Pro, CR10 Smart Pro, Sermoon V1 y bloque calentador de impresora 3D Sermoon V1 Pro...
-
Precio: $43,979.00Expira: 26/03/2023
14 un. Printer 3D M6 Boquilla Extrusora 0.4mm Bronce Boquill
-Titulo Original : 14 Pcs M6 3D Printer Nozzle 0.4mm Extruder Brass Nozzle Print Head-Fabricante : KULANNDER-Descripcion Original: Good Design: The hole of 3D print nozzle is consistent size and machining, the threads is clean and well formed. The size is clear stamped on the nozzles. // Compatibility: Compatible with all 1.75mm ABS/ PLA 3D printer, work well with Monoprice select mini, V5 V6, Prusa i3, Anet8, Anycubic i3 mega, etc. // Replacement Nozzle: The 0.4mm M6 3D printer nozzle is a good back up or emergenices when the stock nozzle clog, our brass nozzles produce consistent printing and no clog, give you a smooth and clean printing. // Brass Material: The extruder brass nozzle print head is made of durable and solid brass material, not easy get rust or erosion, provide long serivice life. // Quantity: Package include 14pcs nozzle print head, out diameter: 0.4mm. // Step 1: Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280). Step 2: After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out. Step 3: Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight. Type: Extruder Brass Nozzle Print Head Material: Brass Compatibility: Compatible with all 1.75mm ABS/ PLA 3D printer, work well with Monoprice select mini,Prusa i3, Anet8, Anycubic i3 mega, etc. Installation: external M6 thread connection Out Thread: M6 Filament Diameter: 1.75mm Output Diameter:0.4mm Small parts, please keep away from children. 14 x 0.4mm nozzle print hea... -
Precio: $135,929.00
Boquilla V6 acero endurecido E3d genuino 1,75 mm x 0,60 mm
-Titulo Original : Genuine E3D Hardened Steel V6 Nozzle - 1.75mm X 0.60mm (V6-NOZZLE-HS-175-600)-Fabricante : E3D-Descripcion Original: Boquillas endurecidas resistentes a la abrasión para uso a largo plazo con filamento de 1,75 m... -
Precio: $66,139.00
0.6MM MK8 Ender 3 Nozzles (10 unidades) impresora 3D
-Titulo Original : 0.6MM MK8 Ender 3 Nozzles 10 pcs 3D Printer Brass Nozzles Extruder for Makerbot Creality CR-10 with 3 Needles and Metal Storage Box (0.6mm) -Fabricante : Meafeng-Descripcion Original: High Resolution: Full HD 1920x1200,High Contrast: 1200:1,High Brightness: 450cd/m2 // 160°wide viewing angles IPS Panel,Ultra thin design 17mm thickness;Histogram // Focus Assist(Red,Yellow,Blue,White four color optional highlight over parts of the image in focus);False Color;Squared segmentation; Embedded audio meter;Camera Mode // Scan Mode(Over, Under);Zoom(Auto,4x,9x,16x);Anamorphic mode(1.3x,2.0x,2.0x mag);Pixel to Pixel;Center Marker;Safe Area (70%,80%,90%) // Marker Type(16:9,4:3,2.35:1,1.85:1);Marker Color(Red,Green,Blue,White,Black,Cyan,Purple,Yellow);Check Field(Gray/Red/Green/Blue);Image Flip (H, V, H/V);Image Freeze;Color Tepm. Adjustment //... -
Precio: $87,589.00
Boquilla RepRap M6 resistente al desgaste con revest. 0.25mm
-Titulo Original : Micro Swiss Plated Wear Resistant Nozzle RepRap - M6 Thread 1.75mm .25mm (All Printers with a E3D V4 / V5 / V6 1.75 Hotend/Prusa i3 MK2 / MK2S / MK3)-Fabricante : MICRO-SWISS-Descripcion Original: Fits: E3D V5-V6 Hotend with 1.75mm Filament // Plated with TwinClad XT Coating // HIGH LUBRICITY WEAR RESISTANT // Orifice size: .25mm // Made in USA by Micro Swiss // This is RepRap style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
-
destacado
Book : Dear Evan Hansen - Emmich, Val - Paul, Justin -...
Precio: $71,449.00-Titulo Original : DEAR EVAN HANSEN (191 JEUNESSE)-Fabricante : PENGUIN... -
destacado
Kingston Digital 16gb Micro Sdhc Uhs-i Class 10 Industrial.
Precio: $85,549.00-Titulo Original : Kingston Digital 16GB Micro SDHC UHS-I Class 10 Industrial Temp Ca... -
destacado
Book : Mandolin Blues With Audio Access - From Memphis To...
Precio: $100,969.00-Titulo Original : Mandolin Blues With Audio Access - From Memphis To Maxwell Street-... -
destacado
Libro : El Capitan Calzoncillos Y La Sensacional Saga Del...
Precio: $42,459.00-Titulo Original : El Capitan Calzoncillos Y La Sensacional Saga Del Señor Sohediondo... -
destacado
Wiha 36291 Juego de destornilladores, Torx, 6 piezas
Precio: $172,719.00-Titulo Original : Wiha 36291 Screwdriver Set, Torx, 6 Piece-Fabricante : WIHA-Descri... -
destacado
Funda Para Laptop De 15.6 Acer Aspire, Dell Inspiron (gris)
Precio: $82,909.00-Titulo Original : 15.6 Inch Laptop Sleeve Bag Waterproof Shockproof Notebook Case C...
Contáctenos
- el bazar digital.com SRL
- 011 - 3221-3652
- info@elbazardigital.com
- +54 9 11 2290-6553
