Arriba

Inicio » Catalogo » Computación » Impresión > Impresión 3D > Filamentos

Impresión > Impresión 3D > Filamentos

Mostrar: 
Mostrar del 1 al 24 (de 485 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Filamento de impresora 3D 1,75 mm SUNLU Silk PLA Plata
    Precio:  $186,309.00
    Agregar al Carrito   Vista

    Filamento de impresora 3D 1,75 mm SUNLU Silk PLA Plata

    -Titulo Original : SUNLU Silk PLA 3D Printer Filament 1.75mm, Shiny PLA Filament 1.75mm Dimensional Accuracy /- 0.02mm, 1kg Spool(2.2lb), Silky 1.75 PLA Silver-Fabricante : SUNLU-Descripcion Original: - Banda de goma/látex para catapulta de tirachinas de caza, longitud: aproximadamente 16 pulgadas (40 cm), grosor: 0,5 mm - Las bandas se pueden instalar rápidamente sin el uso de herramientas, cuerdas o pegamento. - Excelente resistencia al desgaste, alta resiliencia y propiedades de tracción - El paquete incluye: 9 bandas de goma, color: 3 piezas verdes, 3 piezas amarillas, 3 piezas roja...
  • Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [7HJQ3FWL]
    Precio:  $156,399.00
    Agregar al Carrito   Vista

    Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [7HJQ3FWL]

    -Titulo Original : Gizmo Dorks Glitter PLA 3D Printer Filament 3mm (2.85mm) 1kg, Blue-Fabricante : GIZMO DORKS-Descripcion Original: Glitter PLA nozzle temperature range 195 - 225 C; filament diameter of 2.85 mm +/- .03 mm // Thermoplastic PLA is commonly used in 3D printing because of it's low melting temperature, odorless, and low warp // The uniquely designed clear spool is see through so you can see how much filament material is left and comes with a resealable containment bag to protect filament in between uses // Gizmo Dorks PLA is specially formulated and engineered to prevent and reduce jamming // Spool dimensions are 195 mm x 63 mm with a 55 mm spindle diameter; the net weight of the filament is 1 kg which is 2.2 pounds // Size:  |  Color: Glitter PLA adds a new dimension or sparkle to your print. The PLA glitter colors add a glimmer or twinkle throughout the print creating a unique look. There is a physical speckle dispersed throughout the filament to make your prints stand out. Gizmo Dorks Glitter PLA filament works with a wide range of common 3D printers. PLA (Polylactic Acid) is one of the most commonly used 3D printer material and for good reason. The widely used thermoplastic has a low melting temperature while also being virtually warp free. Glitter PLA does not have an odor like ABS and does not require a heated bed. Getting failed prints because of filament jams is a painful aspect of 3D printing. However, Gizmo Dorks Glitter PLA is specifically engineered to reduce jamming.Glitter PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. Glitter PLA is a more earth friendly plastic. It is stronger and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. Glitter PLA enjoys sharper details and corners compared to ABS without the risk of cracking or warping. Glitter PLA can also be printed at higher throughput speeds...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [746F9C52]
    Precio:  $117,609.00
    Agregar al Carrito   Vista

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [746F9C52]

    -Titulo Original : NOVAMAKER 3D Printer Filament - Blue 1.75mm PETG Filament, PETG 1kg(2.2lbs), Dimensional Accuracy +/- 0.03mm-Fabricante : NOVAMAKER-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7S37SW72]
    Precio:  $137,099.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7S37SW72]

    -Titulo Original : TTYT3D Silk Shine Purple 3D Printer PLA Filament, 1.75mm 3D Printing Material Widely Compatible, 1KG 2.2LBS Spool, with Extra Gift 10pcs FDM 3D Printer Nozzle Cleaning Needles-Fabricante : TTYT3D-Descripcion Original: Beautiful Shiny Purple Color: The Finished 3D Printed Item with Silk Glossy Smooth Appearance, Perfect for Arts, Crafts, DIY, Many Different 3D Print Projects // Premium Quality, Easy to Print: Widely Compatibility for FDM 3D Printers, 1.75mm High Diameter Tolerance, No Edge Warping, Consistent Feeding, Stable Print, No clogging, Eco-friendly, Ideal for Indoor Printing. // Printing Tips: Recommend Heat Bed 50-60°C, Recommend Printing Temperature: 220°C, To Avoid being Tangled, Insert Filament into Spool Holes to Fix after Every Time Use // Extra Gift & Package: Together With Small Gift 10pcs 0.4mm 3D Printer Nozzle Cleaning Needles,Vacuum Package with Zipper Bag, Net Weight 1KG/Spool // 100% Satisfy Warranty: Within 24 Hours Reply,100% Satisfaction Guarantee, If You're not Completely Satisfied for Any Reason, Contact us and We'll Help You to Sent it Back and Refunded //...
  • Filamento PLA 3.0mm 1kg COLOR FOTO-1 IMP 3D [0T7N6AUU]
    Precio:  $161,269.00
    Agregar al Carrito   Vista

    Filamento PLA 3.0mm 1kg COLOR FOTO-1 IMP 3D [0T7N6AUU]

    -Titulo Original : Gizmo Dorks 3 mm PLA Filament, 1 kg for 3D Printers, Opaque Red-Fabricante : GIZMO DORKS-Descripcion Original: 2.85 mm diameter, 1 kg net weight // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Print Temperature: 220 - 225°C // Heated Platform Not Required //...
  • Filamento PLA de alta calidad imprecion 3D - Green
    Precio:  $169,099.00
    Agregar al Carrito   Vista

    Filamento PLA de alta calidad imprecion 3D - Green

    -Titulo Original : DO3D Silk Red PLA Satin Shiny 3D Printer Filament, 1.75mm Diameter 1kg Spool 2.2lbs For FDM 3D Printers-Fabricante : DO3D-Descripcion Original: filamento pla de alta calidad: nuestro filamento pla do3d esta hecho de pla de alta calidad, un material termoplastico conocido por sus excelentes propiedades de impresion. con una temperatura de fusion mas baja y facilidad de uso, nuestro filamento garantiza resultados de impresion suaves y consistentes. precision y consistencia dimensionales: garantizamos tolerancias estrictas para nuestros filamentos pla, con un diametro de 0.069 in y una precision dimensional de /- 0.001 in. esto asegura que tus impresiones salgan perfectamente cada vez, sin deformacion ni encogimiento. facil de usar y sin enredos: nuestro filamento pla esta diseñado para ser facil de usar, con bobinado mecanico completo y examen manual para garantizar que la linea este ordenada y menos enredada. el diseño de diametro interior de la bobina mas grande permite una facil alimentacion, lo que hace que el proceso de impresion no tenga complicaciones. sin obstrucciones y sin burbujas: diseñado y fabricado con tecnologia sin obstrucciones, nuestro filamento pla garantiza una excelente union de capas y una gran fluidez para una extrusion suave y estable. tambien se seca por completo durante 24 horas antes del embalaje y se sella al vacio con desecantes para protegerlo de la humedad, asegurando que no haya problemas de obstruccion o burbujas durante la impresion. amplia compatibilidad: nuestro filamento pla es universalmente compatible con la mayoria de las impresoras 3d fdm de 0.069 in comunes en el mercado. con estandares de fabricacion de alta calidad y una pequeña tolerancia dimensional de /- 0.001 in, nuestro filamento garantiza un ajuste perfecto con su impresora para un rendimiento de impresion optimo. ...
  • Filamento Metal 2.85mm 0.2kg COLOR FOTO-1 IMP 3D [74VRDN76]
    Precio:  $63,309.00
    Agregar al Carrito   Vista

    Filamento Metal 2.85mm 0.2kg COLOR FOTO-1 IMP 3D [74VRDN76]

    -Titulo Original : Gizmo Dorks Metal Bronze Fill Filament for 3D Printers 3mm (2.85mm) 200g-Fabricante : GIZMO DORKS-Descripcion Original: Metal Bronze (Bronzefill with PLA base) 3D printer filament vacuumed sealed with desiccant // Extrusion nozzle temperature: 190 - 225 C // 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" // Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, and many more. // metal bronze fill filament is a unique filament blend that allows distinct prints with a metallic look and finish. Metal bronze filament is a special mix made by combining real bronze powder with PLA filament, and the filament prints very similar to normal PLA. Bronze filled filament imparts the look and feel of bronze giving the printed part a sculpted bronze finish look. The finished part will look laser sintered. The filament can be printed on either heated or non heated build plates. The suggested build surface to print on is blue painters tape, and there is essentially no warping. If a heated build plate is used, then please set it to 60 C, and the print will have an increased adhesion to the platform. Metal bronze fill filament can also be printed on regular glass, glass with glue stick, or kapton tape.Extrusion Temperature: 190 - 225 CHeated Bed: Not required but recommended at 60 CDiameter: 2.85mmDiameter Range: +/- 0.03mmNet Weight: 200 gramsGizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool...
  • Filamento ABS 1.75mm 1kg COLOR FOTO-1 IMP 3D [7HR1V488]
    Precio:  $143,549.00
    Agregar al Carrito   Vista

    Filamento ABS 1.75mm 1kg COLOR FOTO-1 IMP 3D [7HR1V488]

    -Titulo Original : Gizmo Dorks Low Odor ABS 3D Printer Filament 1.75mm 1kg, Gray-Fabricante : GIZMO DORKS-Descripcion Original: Uniquely formulated to be virtually smell free while 3D printing // Low odor ABS prints are high in strength and durability while providing for maximum impact resistance. // 200 gram net weight is the perfect sample size to try out filament // Nozzle temperature range 225 - 250 C; filament diameter of 1.75 mm +/- .03 mm // Spool dimensions are 195 mm x 63 mm with a 55 mm spindle diameter; the net weight of the filament is 1 kg which is 2.2 pounds // Size:  |  Color: Gizmo Dorks is now pleased to introduce low odor ABS that eliminates the nasty foul smell emitted during 3D printing. For all of the great mechanical characteristics of ABS, it is known to give off a pungent smell during extrusion. Low odor ABS now gives you all of the wonderful ABS attributes while eliminating the smelly fumes.ABS plastic has always been a great thermoplastic to use in manufacturing and 3D printing for various reasons such as strength and durability. It's why so many commonly used products are made using ABS such as Legos. It has a high glass transition temperature to reduce deformation, but it is also low enough to be safely attainable with standard 3D printers. ABS is a hard strong plastic with increased flexibility when compared to PLA. It is also soluble in Acetone, and it can be easily sanded and machined. Being one of the most widely used filaments in 3D printing, ABS extrudes easily and smoothly with very little stringing or oozing. ABS does cool and shrink after extrusion, so it must be printed on a heated bed and preferably within an enclosed chamber.Extrusion Temperature: 225 - 250 CHeated Bed: 80 - 110 CNet weight: 1 k...
  • Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [7VPGY22C]
    Precio:  $146,849.00
    Agregar al Carrito   Vista

    Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [7VPGY22C]

    -Titulo Original : Silk Rainbow Multicolor PLA 3D Printer Filamentt 3mm(2.85mm) 1KG Multi Color Printing Material Gradually Canging Color PLA Rainbow Mulitcolor Multicolored Metallic Color Gradient Filament CC3D-Fabricante : CC3D-Descripcion Original: NEW COLOR:No polishing needed, printing at a high detail results in a beautiful finish. // Highlight silk pla filament multicolored color // Nice shiny Special Rainbow Multi Color Gradient // Industrial & Scientific > Additive Manufacturing Products > 3D Printing Supplies > 3D Printing Filament // The change from one color to another is random. // Color:Silk Rainbow Diameter (Tolerance): 2.85 mm ±0.10 mm Net Weight: 1000g Recommended Printing Temp: 195 - 230 °C Recommended Printing Speed: 30 - 60 mm/s Heated Bed: Not required but can be used (up to 60 °C) The dimensions of spool: Spool Diameter: 20cm Spool Width: 6.9cm Spool Hub Hole Diameter: 5.3c...
  • Filamento 3D que brilla en la oscuridad Rainbow Pla, 1,75 mm
    Precio:  $190,009.00
    Agregar al Carrito   Vista

    Filamento 3D que brilla en la oscuridad Rainbow Pla, 1,75 mm

    -Titulo Original : OEM MIKA3D Glow In Dark Rainbow PLA 3D Filament, 1.75mm Strong Luminous Multi Colored 3D Printer PLA, Widely Fit For 3D Printer, 1KG 2.2lbs Glowing In Dark Fast Color Change Fluorescent Rainbow PLA-Fabricante : OEM MIKA3D-Descripcion Original: - Cambio rápido de color que brilla en el PLA oscuro del arco iris: este cambio de color es mucho más rápido en comparación con otros. Todo el carrete tiene un color similar y natural durante el día. Para obtener un efecto luminoso sorprendente, exponga el artículo impreso terminado a la luz solar directamente brillante o a la luz ultravioleta durante aproximadamente 20 a 30 minutos; Recomendar Fuentes de Luz: Luz UV, Luz Solar Directamente Fuerte. La luz solar directa funciona bastante bien - Alta calidad y gran compatibilidad: 1,75 mm de diámetro, control de alta calidad, utilizamos materia prima de primera calidad para mantener el efecto luminoso durante más tiempo; Para mantener un mejor efecto luminoso, se sugiere exponer el filamento a la luz del sol durante unos 30 minutos. Perfectamente compatible con la mayoría de las impresoras 3D FDM y bolígrafos 3D del mercado, se funde bien y se alimenta suavemente, sin burbujas, sin atascos, sin deformaciones, fácil de imprimir. - Puntas y configuración de impresión 100% libres de enredos: para nuestro filamento, utilizamos la máquina servo, para hacer todo lo posible para que la línea de filamento se enrolle lo más ordenadamente posible, además todos nuestros filamentos están 100% libres de enredos durante la producción. , Después de cada uso, por favor arregle el extremo del filamento, asegúrese de insertar el extremo libre del filamento en los orificios del carrete, para evitar que se enrede la próxima vez; Temperatura de impresión sugerida: 200*C-220*C - Amplia aplicación y paquete: nuestra serie PLA que brilla en la oscuridad, después de absorber la luz ultravioleta, tiene un fuerte efecto fluorescente ELBAZARDIGITAL en la oscuridad, es muy adecuado para imprimir regalos, decoraciones para fiestas, Acción de Gracias y Navidad, barras luminosas, pantallas de lámparas, etc. El peso neto del filamento del carrete es de 1 kg, envasado al vacío con secadores para mantenerlo seco y limpio. - Servicio postventa y garantía: para nuestra serie PLA que brilla en la oscuridad, es fácil de imprimir y usar. Si tiene alguna pregunta durante el uso, infórmenos en cualquier momento. Siempre estaremos aquí para ayudarlo. Tenemos alta confianza. de nuestro filamento PLA, por favor pruebe y pruebe, siempre estamos aquí para servirle mejor ¿Quiere que un artículo de impresión 3D terminado incluya varios colores diferentes que brillan en la oscuridad? ¿Imprimir los objetos 3D en colores únicos del arco iris multicolor? El filamento PLA Mika3D brilla en la oscuridad Multi Rainbow te satisface, cambia de color cada 5 metros, lo cual es un cambio de color mucho más rápido en comparación con otros en el mercado, ¡respalda muy bien tu innovación y diseño en el mundo de la impresión 3D! # Especificación: Material: Filamento 3D PLA arco iris multicolor que brilla en la oscuridad (ácido poliláctico) Precisión del diámetro: 1,75 mm +/-0,05 mm Temperatura de impresión recomendada: 200-220 C) Velocidad de impresión recomendada: 30-60 mm/s; Cama térmica recomendada: 122-140 F (50 C-60 C) Cantidad: un carrete empaquetado en una caja, el peso neto del filamento del carrete es: 1 kg (2,2 libras) Brilla en la oscuridad Luminoso Multicolor Cambio rápido de color Filamento PLA arcoíris: alrededor de cada 5-10 metros para cambiar los colores: para obtener un efecto luminoso sorprendente, exponga el artículo impreso terminado a luz visible de onda corta ...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [0ITZP6TI]
    Precio:  $161,269.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [0ITZP6TI]

    -Titulo Original : Gizmo Dorks 1.75mm PLA Filament 1kg / 2.2lb for 3D Printers, Gold-Fabricante : GIZMO DORKS-Descripcion Original: 1.75mm diameter, 1kg net weight, PLA Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 200 - 210°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...
  • Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [1MY2FY13]
    Precio:  $120,649.00
    Expira: 04/05/2021
    Agregar al Carrito   Vista

    Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [1MY2FY13]

    -Titulo Original : Inland 2.85mm Silver PLA 3D Printer Filament - 1kg Spool (2.2 lbs)-Fabricante : INLAND-Descripcion Original: 1 KG (approximately 2.20 lbs) Spool / 2.85mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) / A wide range of colors available // Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F), use with heated build platform is recommended // PLA Filament Features: Minimal warping/ No heating bed required/ Little to no odor, a most commonly used thermoplastic material for 3D printing // Widely Application: Inland PLA Filament is compatible with the majority of 3D printers, perfect for cosmetic prints, prototypes, desk toys, low-stress applications, food safety levels and other consumer products // Premium Quality: Inland PLA 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided //...
  • Filamento Hatchbox para imprecion 3d 1.75mm 1kg - F Green
    Precio:  $176,069.00
    Agregar al Carrito   Vista

    Filamento Hatchbox para imprecion 3d 1.75mm 1kg - F Green

    -Titulo Original : HATCHBOX 1.75mm Forest Green PLA 3D Printer Filament, 1 KG Spool, Dimensional Accuracy /- 0.03 Mm, 3D Printing Filament-Fabricante : HATCHBOX-Descripcion Original: especificaciones del filamento: tamaño: carrete de 2.20 libras, diametro del filamento de 0.069 pulgadas (precision dimensional de /- 0.001 pulgadas). temperatura: temperatura recomendada de extrusion/boquilla de 356 °f - 410 °f. filamento de acido polilactico facil de usar: libera tu creatividad con nuestro filamento de pla sin complicaciones. diseñado para darte la mejor experiencia de impresion 3d, el filamento de acido polilactico de hatchbox se puede utilizar comodamente en varias impresoras convencionales. con una dureza y fluidez mejoradas, nuestro acido polilactico ofrece amplios rangos de temperatura y velocidad para adaptarse a todas tus necesidades innovadoras. apto para principiantes y expertos: los filamentos para impresora 3d hatchbox estan hechos en funcion de la calidad y la consistencia, por lo que les resulta facil a los usuarios novatos comenzar con ajustes basicos. quienes tengan experiencia en las impresiones pueden llevar sus diseños al limite sin preocuparse por problemas de pureza, tolerancia o impresion. filamentos de impresion 3d de alta calidad: sin obstrucciones, burbujas ni enredos. el acido polilactico de hatchbox esta formulado para ofrecer una deformacion minima y poco o ningun olor sin el uso de una base caliente. el acido polilactico esta sellado al vacio con desecante para evitar la absorcion de humedad, lo que permite una resolucion con un alto nivel de detalle....
  • Filamento ABS 1.75mm 1kg COLOR FOTO-1 IMP 3D [0ITZOFUY]
    Precio:  $146,649.00
    Agregar al Carrito   Vista

    Filamento ABS 1.75mm 1kg COLOR FOTO-1 IMP 3D [0ITZOFUY]

    -Titulo Original : Gizmo Dorks 1.75mm ABS Filament 1kg / 2.2lb for 3D Printers, Dark Blue-Fabricante : GIZMO DORKS-Descripcion Original: 1.75mm diameter, 1kg net weight, ABS Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 230 - 240°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [6ZZRW63C]
    Precio:  $146,849.00
    Expira: 05/09/2023
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [6ZZRW63C]

    -Titulo Original : NOVAMAKER 3D Printer Filament - Blue 1.75mm PLA Filament, PLA 1kg(2.2lbs), Dimensional Accuracy +/- 0.03mm-Fabricante : NOVAMAKER-Descripcion Original: 1 kg (2.20 lbs) PLA Filament Vacuumed Sealed With Desiccant // 1.75mm Diameter (Dimensional Accuracy +/- 0.03mm), The temperature range for this Filament Refills is 220-250 °C (428°F-482°F), Best temperature 235°C(455°F). // Printing temperature: 190-220 °C (374°F-428°F), Best temperature 195°C(386°F) // No Bubble and Block Nozzle, Nood Stick Hot Bed, A Smooth PLA Used // Compatible with the following 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, 3doodler (pen), Delta, Mbot, Type A // Color: Diameter :  Tolerance Level :  Print Temperature :  Print Speed :  Base Plate Temperature :  Bubble :  Length :  Spool Diameter: -Spool Width: Spool Hub Hole Diameter: NovaMaker PLA 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.03mm, the consistently round diameters provide optimum flow through the extruder nozzle. The PLA filaments are useful in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp. Compared with traditional brittle PLA, NovaMaker 3D printer filaments have adjusted the degradability of the material for optimal performance. NovaMaker 3D printer filaments comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances. The 1.75mm PLA filament gives off a sweet smell, and it is considered by many as an improvement over hot plastic. Compatible with ALL FDM 3D printers and 3D Pen. Such as AirWolf, Aleph Objects, BCN3D, Beeverycreative, BigBox, CEL, CraftBot, CraftUnique, CubePro, Cubicon, E3D, FlashForge, Lulzbot, MakerBot, Makergear, OrdBot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zortrax, UP! The PLA 3D printer filaments are backed by NovaMaker . Seize the chance to click button right now...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [7PFSJVFQ]
    Precio:  $123,879.00
    Agregar al Carrito   Vista

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [7PFSJVFQ]

    -Titulo Original : OVERTURE PETG Filament 1.75mm with 3D Build Surface 200 x 200 mm 3D Printer Consumables, 1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.05 mm, Fit Most FDM Printer, Red-Fabricante : OVERTURE-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento Termico 1.75mm 1kg COLOR FOTO-1 IMP 3D [16996EWS]
    Precio:  $205,129.00
    Agregar al Carrito   Vista

    Filamento Termico 1.75mm 1kg COLOR FOTO-1 IMP 3D [16996EWS]

    -Titulo Original : Gizmo Dorks 1.75mm PLA Filament, 1 kg for 3D Printers, Color Change Blue to White-Fabricante : GIZMO DORKS-Descripcion Original: 1.75mm diameter, 1 kg net weight // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Print Temperature: 190 - 225°C // Heated Platform Not Required //...
  • Filamento PLA de alta calidad imprecion 3D - Black to Blue
    Precio:  $189,569.00
    Agregar al Carrito   Vista

    Filamento PLA de alta calidad imprecion 3D - Black to Blue

    -Titulo Original : Do3d 3d Printing Filament Silk Black To Sapphire Blue Pla 2 Color Change, Tidy Winding Silk Pla 2 Color Gradient Transfer Multi Colored, 1.75mm 1kg 2.2lbs Cardboard Spool Pla, Silk Pla Black To Blue-Fabricante : Do3d-Descripcion Original: Filamento PLA de transferencia de 2 colores brillantes de seda de alta calidad: cambia de color de un color a otro, 2 colores de seda cambiados, con filamento de varios colores en un carrete. Todas nuestras materias primas son materias primas 100% nuevas, es un buen rendimiento de filamento, más detalles y fácil de imprimir, proporciona una excelente superficie brillante de seda de las piezas impresas; es perfecto para modelos 3D, piezas de vacaciones, decoración, regalo para niños, etc Ampliamente compatible: filamento PLA de seda de 2 tipos de cambio de color de 0.069 in con alto diámetro controlado, diseño para adaptarse a la mayoría de impresoras 3D FDM / bolígrafo de impresión 3D en el mercado, fabricado con línea de producción sin obstrucciones para garantizar una experiencia de impresión suave y estable Sugerencia de impresión: Diseño para adaptarse a la mayoría de impresoras 3D FDM/pluma de impresión 3D en el mercado, fácil de imprimir; Sin pulido de superficie, el artículo impreso acabado con superficie brillante de seda, temperatura de impresión sugerida: 210°c; Sugiere cama de calor: 30-60°c o no necesario; Sugiere tamaño de boquilla de impresora: 0.016 in Sin enredos y fácil de imprimir: todo el filamento producido por el sistema de control servo, para garantizar el material PLA de seda con diámetro de consistencia, 100% libre de enredos durante la producción, por favor fije el extremo del filamento después de cada uso, sin burbujas, fuerte dureza, imprima mucho más suavemente Paquete: Peso neto del filamento 1kg/carrete, 1kg/carrete, sellado al vacío en cada bolsa; Tenemos los colores más populares libres a su elección. ...
  • Filamento Policarbonato 2.85mm 0.2kg COLOR FOTO1 IMP 3D 74VZ
    Precio:  $68,179.00
    Agregar al Carrito   Vista

    Filamento Policarbonato 2.85mm 0.2kg COLOR FOTO1 IMP 3D 74VZ

    -Titulo Original : Gizmo Dorks Polycarbonate Filament for 3D Printers 3mm (2.85mm) 200g, Transparent-Fabricante : GIZMO DORKS-Descripcion Original: Polycarbonate 3D printer filament vacuumed sealed with desiccant is tough, strong filament that has high heat resistance // Extrusion nozzle temperature: 255 - 300 C // 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" // Printed parts made with Gizmo Dorks Polycarbonate filament have increased mechanical strength compared to ABS and PLA // The Gizmo Dorks Polycarbonate filament, also known as PC filament, is an incredibly strong thermoplastic material used in 3D printing. It is a good electrical insulator while having heat-resistant properties. Polycarbonate is used in a whole host of applications such as data storage, phones, eye protection, bullet-proof glass, and more. Polycarbonate has a high temperature resistance for a thermoplastic, and it does not shatter like plexiglass. It tends to bend and deform similar to hard rubber until it eventually breaks. It also has high optical clarity.PC absorbs a lot of moisture in the air. It is a hygroscopic material, and it is best to store in an airtight container when not in use. Even during use the material can become unprintable within a 24 hour print if in a humid environment. Therefore, keeping in an airtight container during printing as well is ideal. Dry filament will print more clear. Filament that has absorbed moisture will print white as well as pop and bubble during the print.Extruding temperature is generally around 260 C, depending on the printer. PC slowly softens when heated, unlike PLA which has a high transition temperature. Slower print speeds are preferred as an increase in temperature is required for faster prints. Polyimide tape (Kapton) should be used on a heated bed, ~120 C. Some users prefer applying glue or superglue on a glass bed and then heating to ~120 C-130 C. Please do not inhale any fumes. Heated up superglue can release toxic fumes, so only use in a well ventilated area.Extrusion Temperature: 255 - 300 CHeated Bed: 100 - 120 CDiameter: 2.85mm +/- 0.03mmColors: Black, Blue, or TransparentNet Weight: 200 gramsGizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to sample the filament quality and color before committing to a larger 1 kilogram spool...
  • Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [78JMFH7S]
    Precio:  $98,569.00
    Agregar al Carrito   Vista

    Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [78JMFH7S]

    -Titulo Original : SAINSMART 1.75mm 250g Flexible TPU 3D Printing Filament, Dimensional Accuracy +/- 0.05 mm (Emerald)-Fabricante : SAINSMART-Descripcion Original: TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible. // Compatible with all FDM printers on the market which accept 1.75 mm filament. Including Prusa i3, Monoprice MakerSelect, X Creality, and other RepRap printers. // With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament’s tendency to not warp. // Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more! // It's better to work on direct drive extruders. Please print slowly and read the tips if you are bowden. // Color: SainSmart TPU filament is renowned for its high strength and flexibility. With the design freedom of 3D printing, SainSmart filament is the key to bringing your project, whether it be a weekend hobby orprototyping for a Fortune 500 company, from the sketchpad to reality. Each spool of SainSmart TPU filament comes with 0.25 kg of material. This filament is drawn out to a diameter of 1.75 mm with a dimensional accuracy of +/- 0.05 mm, making it the perfect choice for most printers on the market. Diameter: 1.75 mm Material: Flexible TPU Net Weight: 0.25 kg Shore Hardness: 95 A Print Nozzle: 0.4 – 0.8 mm Extruder Temperature: 195 – 230°C Print Bed Temperature: 40 – 60°C Cooling Fan: On Print Slower: 15 – 30 m/s First Layer Settings: 100% Height. 150% Width, 50% Speed Disable Retraction: Should reduce oozing and stringing Cooling Fan: On after first layer Increase Multiplier: 1.1, should increase bonding Do not over extrude filament when loading. As soon as the filament start protruding from the nozzle, stop. Loading any faster will cause the filament to get caught in extruder gear. Feed the filament directly to the extruder, and not through the feeder tube. This reduces back tension in the filament as well as drag, ensuring proper feeding. 1x SainSmart TPU Flexible Filament 1.75mm 0.25kg vacuum sealed w/ desiccan...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [0ZAUQZTA]
    Precio:  $161,469.00
    Agregar al Carrito   Vista

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [0ZAUQZTA]

    -Titulo Original : eSUN 3D 1.75mm PETG Black Filament 1kg (2.2lb), PETG 3D Printer Filament, 1.75mm Solid Opaque Black-Fabricante : ESUN-Descripcion Original: 1KG net (approximately 2.2 lbs) Filament with Clear Spool // eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant // 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) // Recommended Extrusion/Nozzle Temperature 240C - 255C // Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5" // Extrusion Temperature Range: 240 to 255 Celsius Plate temperature: 80~90 Celsius or without heated Printing speed: 30~60mm/s Moving speed: 30~60mm/s 10 Solid/Opaque Colors(Solid Black, Solid White , Solid Red, Solid Silver, Solid Gold, Solid Gray, Solid Blue, Solid Green, Solid Purple, Solid Yellow) and 6 Semi-translucent Colors(Blue, Magenta, Green, Orange, Yellow, Natural). PETG is an excellent material which combines the advantages of other filaments. Odorless; Little shrinkage rate; hydrophobicity (Does not absorb water); Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; Good glossy finish; There are a lot of eSUN PETG clients and experience sharing since it was released in 2014. Ask ESUN/INTSERVO if you need help dial it in. PETG requires slower printing speed than other materials...
  • Filamento de impresión 3D OEM Mika3D PLA 1,75 mm 1 kg-Azul
    Precio:  $169,539.00
    Agregar al Carrito   Vista

    Filamento de impresión 3D OEM Mika3D PLA 1,75 mm 1 kg-Azul

    -Titulo Original : OEM MIKA3D Glowing In Dark Blue PLA 3D Printing Filament, 1.75mm Strong Luminous Glow In Dark Blue 3D Printer PLA, Widely Fit For 3D Printer, 1KG 2.2lbs Glow In Dark Fluorescent Blue PLA-Fabricante : OEM MIKA3D-Descripcion Original: - Filamento PLA que brilla en la oscuridad: nuestro filamento PLA Sereise que brilla en la oscuridad brillará en la oscuridad después de absorber la luz ultravioleta. Tiene un color natural durante el día, mientras que tiene un increíble azul fluorescente en la oscuridad después de la exposición a la luz solar intensa o a la luz ultravioleta; Para obtener un efecto luminoso sorprendente, exponga el artículo impreso terminado a la luz solar directamente brillante o a la luz ultravioleta durante aproximadamente 20 a 30 minutos; Recomendar Fuentes de Luz: Luz UV, Luz Solar Directamente Fuerte. La luz solar directa funciona bastante bien - Alta calidad y gran compatibilidad: 1,75 mm de diámetro, control de alta calidad, utilizamos materia prima de primera calidad para mantener el efecto luminoso durante más tiempo; Para mantener un mejor efecto luminoso, se sugiere exponer el filamento a la luz del sol durante unos 30 minutos. Perfectamente compatible con la mayoría de las impresoras 3D FDM y bolígrafos 3D del mercado, se funde bien y se alimenta suavemente, sin burbujas, sin atascos, sin deformaciones, fácil de imprimir. - Puntas y configuración de impresión 100% libres de enredos: para nuestro filamento, utilizamos la máquina servo, para hacer todo lo posible para que la línea de filamento se enrolle lo más ordenadamente posible, además todos nuestros filamentos están 100% libres de enredos durante la producción. , Después de cada uso, por favor arregle el extremo del filamento, asegúrese de insertar el extremo libre del filamento en los orificios del carrete, para evitar que se enrede la próxima vez; Temperatura de impresión sugerida: 200*C-220*C - Amplia aplicación y paquete: nuestra serie PLA que brilla en la oscuridad, después de absorber la luz ultravioleta, tiene un fuerte efecto fluorescente ELBAZARDIGITAL en la oscuridad, es muy adecuado para imprimir regalos, decoraciones para fiestas, Acción de Gracias y Navidad, barras luminosas, pantallas de lámparas, etc. El peso neto del filamento del carrete es de 1 kg, envasado al vacío con secadores para mantenerlo seco y limpio. - Servicio postventa y garantía: para nuestra serie PLA que brilla en la oscuridad, es fácil de imprimir y usar. Si tiene alguna pregunta durante el uso, infórmenos en cualquier momento. Siempre estaremos aquí para ayudarlo. Tenemos alta confianza. de nuestro filamento PLA, por favor pruebe y pruebe, siempre estamos aquí para servirle mejor ¿Quieres un artículo de la serie que brilla en la oscuridad? ¿Imprimir los objetos 3D en colores que brillan en la oscuridad? Nuestro filamento PLA que brilla en la oscuridad lo satisface, nuestro filamento PLA de la serie que brilla en la oscuridad brillará en la oscuridad después de absorber la luz ultravioleta. Tiene un color natural durante el día, mientras que tiene un increíble color fluorescente en la oscuridad después de la exposición a la luz solar intensa o a la luz ultravioleta; Para obtener un efecto luminoso sorprendente, exponga el artículo impreso terminado a la luz solar directamente brillante o a la luz ultravioleta durante aproximadamente 20 a 30 minutos; Recomendar Fuentes de Luz: Luz UV, Luz Solar Directamente Fuerte. La luz solar directa funciona bastante bien, ¡apoya muy bien su innovación y diseño en el mundo de la impresión 3D! # Especificación: Material: Filamento PLA 3D azul oscuro (ácido poliláctico) Precisión del diámetro: 1,75 mm +/-0,05 mm Temperatura de impresión recomendada: 200-220 C) Velocidad de impresión recomendada: 30-60 mm/s; Cama térmica recomendada: 122-140 F (50 C-60 C) Cantidad: un carrete empaquetado en una caja, el peso neto del filamento del carrete es: 1 kg (2,2 libras) Filamento PLA luminoso que brilla en la oscuridad: para obtener un efecto luminoso sorprendente, exponga el acabado impreso Objeto a luz visible de onda corta ...
  • Filamento Acetal 2.85mm 1kg COLOR FOTO-1 IMP 3D [0LAJNH14]
    Precio:  $171,019.00
    Agregar al Carrito   Vista

    Filamento Acetal 2.85mm 1kg COLOR FOTO-1 IMP 3D [0LAJNH14]

    -Titulo Original : Gizmo Dorks 3mm (2.85mm) Acetal Delrin Filament POM 1kg / 2.2lbs for 3D Printers, Black-Fabricante : GIZMO DORKS-Descripcion Original: High quality acetal 3D printer filament comes vacuum sealed with a desiccant pack // POM filament temperatures - hot end nozzle: 210 - 220 C; bed temperature: 110 C // Acetal printed parts have great strength and low friction, ideal for impact parts or gear wheels // Acetal warps during the print so an enclosed printer (can be simple cardboard over printer) and a heated bed are recommended // Only use in well ventilated areas or ventilated systems // Polyoxymethylene (POM) filament is also known as Acetal or Polyacetal. It is a commonly used thermoplastic to engineer specific parts. Acetal filament has high stiffness, low friction, and excellent wear resistance. It has good elastic resilience and great dimensional stability. The filament has good chemical and heat resistance. Because of it's low friction, POM is routinely used as gear wheels, ball bearings, etc. It has high impact resistance, which is one of the reasons the M16 rifle's stock is made out of POM.Extrusion Settings - The recommended print temperature is between 210 C - 220 C. Please note that acetal degrades when overheated and may give off small amounts of formaldehyde gas. Do not keep acetal heated above 230 C. Therefore, please always use in a well ventilated area or in a ventilation system.Print Bed - The hardest part to printing acetal filament is getting the first layer to adhere. POM filament does not typically adhere to conventional 3D print bed surfaces. Some users have found success with blue painters tape with hairspray on top (different blue tapes and hairspray brands have different results). However, POM filament prefers wood or cellulose based platforms. Thicker weight paper such as resume paper or sketch paper can be glued to borosilicate glass with Elmer's glue stick. A heated bed should be used to at least 100 - 110 C.Special Note - POM filament warps a lot. An enclosed chamber should be used to retain heat for better layer adhesion and reduce delamination issues. Please keep acetal away from moisture and always keep filament in an airtight container with a desiccant.Extrusion Temperature: 210 - 220 CHeated Bed: 110 CPrint speeds : 30mm/sDiameter: 2.85mm +/- 0.03mmNet Weight: 1 kilogramAvailable Colors in 200g Size: Black and Whit...
  • Filamento Pla 1.75mm 3kg Color Foto-1 Imp 3d [1bdl4e42]
    Precio:  $1,271,239.00
    Agregar al Carrito   Vista

    Filamento Pla 1.75mm 3kg Color Foto-1 Imp 3d [1bdl4e42]

    -Titulo Original : Proto-pasta HTP21730-CF High Temperature Carbon Fiber Spool, PLA 1.75 mm, 3 kg, Black-Fabricante : PROTO-PASTA-Descripcion Original: Includes the benefits of carbon fiber with substantially increased temperature resistance when annealed. Comes on fully corrugated recyclable spool with standard dimension // Matte Black finish on prints that hides layer lines for more attractive Printed parts // Processing is comparable to standard PLA. No heated bed required. Process may be less consistent on smaller nozzles (&let; . 4mm) and/or Bowden Type machines // We recommend printing this material at 190c-230c using a 4 mm or larger nozzle. Please Note that this filament is more brittle than normal PLA and requires more careful handling to prevent breaking // Designed and manufactured in the USA with quality and customer service as a top priorities. Usa sourced packaging and labor // Color:  |  Size:  |  Style: Peg; proto-pasta's high Temp carbon fiber PLA (htpla-cf) combines engineering-grade performance with the ease and eco-friendliness of PLA printing. Since kick starting the world's first 3D printable carbon fiber PLA and our original high Temp PLA, we've wanted to combine the two for a super-material. compared to the original carbon fiber PLA, htpla-cf has improved toughness for less breaking when handling and easier processing and much better high-temperature resistance when annealed. Like in the original carbon fiber PLA, the added carbon fiber increases stiffness and resistance to warpage. htpla-cf is now available in a mammoth 3kg spool for large format printing! 1. 75mm diameter 3kg spools contain more than 1 KM of filament! How cool is that! ! htpla-cf, like aromatic coffee, is based on our high Temp PLA V2. 0, so it prints with ease and also has a potential heat deflection temperature (hdtv) in excess of 140C (285F) depending on processing. We had good results annealing (also called heat treating or crystallizing) in an Oven at 110C (225F) for an hour. We recommend leaving the supports on your parts, placing them on a non-radiating surface (like glass, ceramic, or composite), and letting them cool in the Oven to minimize distortion. Parts must be baked above 60C for any crystallization to occur. carbon fiber is somewhat abrasive, so consider upgrading to a wear resistant nozzle for less regular maintenance. In our experience, good results were achieved using standard PLA parameters and standard build surface preparation (Blue tape or glue stick). no heated bed required. contact Proto-pasta for more information...
Mostrar del 1 al 24 (de 485 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
Destacados
Revisar todos destacados

Información

Información

Nuestras ofertas

Nuestras ofertas

Su cuenta

Su cuenta

Mantente conectado

Mantente conectado

Contáctenos

Contáctenos

elbazardigital.com   © 2024