Arriba

Inicio » Catalogo » Computación » Impresión > Impresión 3D > Filamentos

Impresión > Impresión 3D > Filamentos

Mostrar: 
Mostrar del 1 al 24 (de 491 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • filamento para impresora 3d pla acero inoxidable 1.75mm500g
    Precio:  $305,229.00
    Agregar al Carrito   Vista

    filamento para impresora 3d pla acero inoxidable 1.75mm500g

    -Titulo Original : Protopasta 3D Printer Filament, PLA Filament 1.75mm, Stainless Steel Filled PLA, 500g Spool-Fabricante : Protopasta-Descripcion Original: - Versátil - ¡El PLA relleno de acero inoxidable se puede pulir para que parezca metal pulido! también es 2X la Densidad de PLA para impresiones de sensación sustancial La flexibilidad de este filamento PLA de 1.75 le brinda versatilidad y durabilidad para piezas hermosas de la mayoría de las impresoras 3D estándar. - Variedad de acabados: en forma inacabada, las impresiones parecen metal fundido. Con la opción de tratamiento térmico, cepillo de alambre o pulido, este filamento 1.75 le brinda muchas opciones diferentes para darle a su producto terminado una apariencia diferente. - Alta calidad: Proto-pasta ofrece solo PLA de filamento de impresora 3D de alta calidad fabricado en EE. UU. Nuestro PLA de acero inoxidable es bastante denso en comparación con el PLA estándar. Usando solo materiales de primera calidad con un enfoque en la artesanía, este PLA 1.75 es uno en el que puede confiar para hacer el trabajo. - Más fácil de usar: este filamento PLA de 1,75 mm se ha optimizado para el flujo y tiene menos humedad que los PLA estándar para ayudar a evitar la absorción de calor y mantener el flujo másico. Esta combinación de características hace que sea más fácil de usar que la mayoría de los PLA estándar. - Ampliamente compatible: diseñado para funcionar con la mayoría de las impresoras 3D estándar, este filamento 3D PLA 1.75 tiene una amplia gama de compatibilidad que le permite administrar un negocio o simplemente crear piezas premium en la comodidad de su hogar. Presentamos PLA relleno de acero inoxidable. Es un material denso que se imprime tan fácilmente como el PLA estándar, pero da como resultado impresiones pesadas que se pueden terminar después de la impresión para lograr resultados sorprendentes. - ¡Perfecto para joyas, disfraces, accesorios, figuritas, manualidades, robots y más! - El PLA de acero inoxidable Protopasta es un compuesto de PLA Natureworks 4043D y acero inoxidable en polvo finamente molido. En forma de filamento, es bastante frágil y debe manipularse con cuidado para evitar que se rompa. Material Base de datos Resina: PLA Tamaño de partícula: menos de 250 micras (0,25 mm) Olor: bajo o nulo Densidad: 2,4 g/cm3 (2400 kg/m3) Longitud (500 g): 90 m (1,75 mm) y 36 m (2,85 mm) Tratamiento térmico: 110C (225F) durante 10 min o según sea necesario para obtener el resultado deseado Pérdida total de rigidez (antes del tratamiento térmico): 50-60C (Tg) Pérdida total de rigidez (después del tratamiento térmico): 150-175C (fusión) Dimensión (antes del tratamiento térmico): 0 % X/Y/Z Cambio de dimensión (después del tratamiento térmico): 1,5 % de contracción X/Y y 1 % de crecimiento típico de Z, pero calcule y confirme para su impresión y proceso específicos Configuración de la impresora Velocidad: 10 -20 mm/s 1.ª capa, 20-80 mm/s el resto de la pieza Punto de ajuste de la boquilla: 185-215 °C (más caliente en la 1.ª capa para una mejor adhesión) Boquilla real: mantenga el punto de ajuste, reduzca la velocidad si es inferior a Tipo de boquilla: Estándar o resistente al desgaste para uso prolongado Diámetro de la boquilla: se prefiere 0,6 mm o más grande, 0,4 mm está bien con un mínimo de 0,25 mm para expertos Grosor de la capa: se recomienda 0,15-0,20 mm para lograr un equilibrio entre calidad, confiabilidad y productividad Be d Temp (si está disponible, no se requiere): 50* C...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7HBLG5S7]
    Precio:  $164,629.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7HBLG5S7]

    -Titulo Original : Gizmo Dorks Glitter PLA 3D Printer Filament 1.75mm 1kg, Blue-Fabricante : GIZMO DORKS-Descripcion Original: Glitter PLA nozzle temperature range 195 - 225 C; filament diameter of 1.75 mm +/- .03 mm // Thermoplastic PLA is commonly used in 3D printing because of it's low melting temperature, odorless, and low warp // The uniquely designed clear spool is see through so you can see how much filament material is left and comes with a resealable containment bag to protect filament in between uses // Gizmo Dorks PLA is specially formulated and engineered to prevent and reduce jamming // Spool dimensions are 195 mm x 63 mm with a 55 mm spindle diameter; the net weight of the filament is 1 kg which is 2.2 pounds // Size:  |  Color: Glitter PLA adds a new dimension or sparkle to your print. The PLA glitter colors add a glimmer or twinkle throughout the print creating a unique look. There is a physical speckle dispersed throughout the filament to make your prints stand out. Gizmo Dorks Glitter PLA filament works with a wide range of common 3D printers. PLA (Polylactic Acid) is one of the most commonly used 3D printer material and for good reason. The widely used thermoplastic has a low melting temperature while also being virtually warp free. Glitter PLA does not have an odor like ABS and does not require a heated bed. Getting failed prints because of filament jams is a painful aspect of 3D printing. However, Gizmo Dorks Glitter PLA is specifically engineered to reduce jamming.Glitter PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. Glitter PLA is a more earth friendly plastic. It is stronger and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. Glitter PLA enjoys sharper details and corners compared to ABS without the risk of cracking or warping. Glitter PLA can also be printed at higher throughput speeds...
  • Filamento De Limpieza 1.75mm 1kg COLOR FOTO1 IMP 3D 746J454J
    Precio:  $93,019.00
    Agregar al Carrito   Vista

    Filamento De Limpieza 1.75mm 1kg COLOR FOTO1 IMP 3D 746J454J

    -Titulo Original : NovaMaker 3D Printer Cleaning Filament 1.75mm Natural, 0.1kg(0.22lb), Dimensional Accuracy +/- 0.05mm,-Fabricante : NOVAMAKER-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7T3KBF3F]
    Precio:  $139,189.00
    Expira: 25/03/2023
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7T3KBF3F]

    -Titulo Original : Silk Shiny Red Copper PLA 3D Printer Filament 1.75mm 1KG 2.2LBS Spool Widely Compatible 3D Printing Metal Copper Feeling HZST3D-Fabricante : SHENGTIAN-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [0ZAUR6M0]
    Precio:  $164,839.00
    Agregar al Carrito   Vista

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [0ZAUR6M0]

    -Titulo Original : eSUN 3D 1.75mm PETG White Filament 1kg (2.2lb), PETG 3D Printer Filament, 1.75mm Solid Opaque White-Fabricante : ESUN-Descripcion Original: 1KG net (approximately 2.2 lbs) Filament with Clear Spool // eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white, solid red, solid blue, solid gray, solid green, solid yellow, solid purple, solid gold, solid silver // 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) // Recommended Extrusion/Nozzle Temperature 230C - 250C // Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5" // Extrusion Temperature Range: 230 Celsius to 250 Celsius Plate temperature: 80~90_ or without heated Printing speed: 30~60mm/s Moving speed: 30~60mm/s PETG is an excellent material which combines the advantages of both PLA and ABS. Odorless; Little shrinkage rate; hydrophobicity (Will not absorb water and as such clog the extruders); Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; Good glossy finish...
  • Filamento PLA de alta calidad imprecion 3D - Black to Red
    Precio:  $199,539.00
    Agregar al Carrito   Vista

    Filamento PLA de alta calidad imprecion 3D - Black to Red

    -Titulo Original : DO3D 3D Silk PLA Black To Red 2 Color Change 3D Printer Filament, Tidy Winding Silk 2 Color Gradient Transfer Multi Colored Silk PLA, 1.75mm 1KG 2.2LBS Cardboard Spool PLA, Silk PLA Black To Red-Fabricante : DO3D-Descripcion Original: filamento pla de transferencia de 2 colores brillantes de seda de alta calidad: cambia de color de un color a otro, 2 colores de seda cambiados, con filamento de varios colores en un carrete. todas nuestras materias primas son materias primas 100% nuevas, es un buen rendimiento de filamento, mas detalles y facil de imprimir, proporciona una excelente superficie brillante de seda de las piezas impresas; es perfecto para modelos 3d, piezas de vacaciones, decoracion, regalo para niños, etc ampliamente compatible: filamento pla de seda de 2 tipos de cambio de color de 0.069 in con alto diametro controlado, diseño para adaptarse a la mayoria de impresoras 3d fdm / boligrafo de impresion 3d en el mercado, fabricado con linea de produccion sin obstrucciones para garantizar una experiencia de impresion suave y estable sugerencia de impresion: diseño para adaptarse a la mayoria de impresoras 3d fdm/pluma de impresion 3d en el mercado, facil de imprimir; sin pulido de superficie, el articulo impreso acabado con superficie brillante de seda, temperatura de impresion sugerida: 210°c; sugiere cama de calor: 30-60°c o no necesario; sugiere tamaño de boquilla de impresora: 0.016 in sin enredos y facil de imprimir: todo el filamento producido por el sistema de control servo, para garantizar el material pla de seda con diametro de consistencia, 100% libre de enredos durante la produccion, por favor fije el extremo del filamento despues de cada uso, sin burbujas, fuerte dureza, imprima mucho mas suavemente paquete: peso neto del filamento 1kg/carrete, 1kg/carrete, sellado al vacio en cada bolsa; tenemos los colores mas populares libres a su eleccion. ...
  • Filamento ABS 1.75mm 5kg COLOR FOTO-1 IMP 3D [74WL56VN]
    Precio:  $685,369.00
    Agregar al Carrito   Vista

    Filamento ABS 1.75mm 5kg COLOR FOTO-1 IMP 3D [74WL56VN]

    -Titulo Original : Gizmo Dorks ABS Filament for 3D Printers 1.75mm 5kg, Black-Fabricante : GIZMO DORKS-Descripcion Original: ABS (Acrylonitrile Butadiene Styrene) 3D printer filament vacuumed sealed with desiccant // Extrusion nozzle temperature: 225 - 250 C; Recommended to use a heated build platform // 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 5kg / Spool Diameter: 11.75" / Spool Width: 6.25" / Spool Hub Diameter: 1.25" // ABS filament is compatible with various 3D printers such as the Monoprice Maker Select, Lulzbot, Flash Forge, and many more! // ABS filament is made of top notch pure ABS resin. Our ABS resins are of the highest quality and produced with the utmost purity. ABS, Acrylonitrile Butadiene Styrene, is a favorite filament among 3D printer users because it is light weight and durable. It can be injection molded which makes it perfect for 3D printing extruders. It has a high glass transition temperature to reduce deformation, but it is also low enough to be safely attainable with standard 3D printers. ABS is a hard strong plastic with some flexibility when compared to PLA. It is also soluble in Acetone, and it can be easily sanded and machined. ABS is one of the most widely used plastics in 3D printing and for good reason. It is a strong plastic that has a decent amount of flex. The filament extrudes easily and smoothly with very little stringing or oozing. ABS does cool and shrink after extrusion, so it must be printed on a heated bed and preferably within an enclosed-case.Extrusion Temperature: 225 - 250 CHeated Bed: 80 - 110 CDiameter: 1.75mm +/- 0.03mmNet Weight: 5 kilogramsAvailable Colors in 5kg Size: Black, Gray, WhiteGizmo Dorks has proudly released this filament with a net weight 5 kilograms. The larger amount of filament allows continuous prints without the need to swap out spools. It's perfect for larger builds...
  • Filamento ABS 2.85mm 1kg COLOR FOTO-1 IMP 3D [7HR3GBFC]
    Precio:  $159,509.00
    Agregar al Carrito   Vista

    Filamento ABS 2.85mm 1kg COLOR FOTO-1 IMP 3D [7HR3GBFC]

    -Titulo Original : Gizmo Dorks Low Odor ABS 3D Printer Filament 3mm (2.85mm) 1kg, Pink-Fabricante : GIZMO DORKS-Descripcion Original: Uniquely formulated to be virtually smell free while 3D printing // Low odor ABS prints are high in strength and durability while providing for maximum impact resistance. // 200 gram net weight is the perfect sample size to try out filament // Nozzle temperature range 225 - 250 C; filament diameter of 2.85 mm +/- .03 mm // Spool dimensions are 195 mm x 63 mm with a 55 mm spindle diameter; the net weight of the filament is 1 kg which is 2.2 pounds // Size:  |  Color: Gizmo Dorks is now pleased to introduce low odor ABS that eliminates the nasty foul smell emitted during 3D printing. For all of the great mechanical characteristics of ABS, it is known to give off a pungent smell during extrusion. Low odor ABS now gives you all of the wonderful ABS attributes while eliminating the smelly fumes.ABS plastic has always been a great thermoplastic to use in manufacturing and 3D printing for various reasons such as strength and durability. It's why so many commonly used products are made using ABS such as Legos. It has a high glass transition temperature to reduce deformation, but it is also low enough to be safely attainable with standard 3D printers. ABS is a hard strong plastic with increased flexibility when compared to PLA. It is also soluble in Acetone, and it can be easily sanded and machined. Being one of the most widely used filaments in 3D printing, ABS extrudes easily and smoothly with very little stringing or oozing. ABS does cool and shrink after extrusion, so it must be printed on a heated bed and preferably within an enclosed chamber.Extrusion Temperature: 225 - 250 CHeated Bed: 80 - 110 CNet weight: 1 k...
  • Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [0GU2E50I]
    Precio:  $164,629.00
    Agregar al Carrito   Vista

    Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [0GU2E50I]

    -Titulo Original : Gizmo Dorks 3mm (2.85mm) PLA Filament 1kg / 2.2lb for 3D Printers, Gray-Fabricante : GIZMO DORKS-Descripcion Original: 2.85mm diameter, 1kg net weight, PLA Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 200 - 210°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...
  • Filamentos para impresora 3D Pla de seda en 2 colores,6un
    Precio:  $259,259.00
    Agregar al Carrito   Vista

    Filamentos para impresora 3D Pla de seda en 2 colores,6un

    -Titulo Original : 6 Spools Fast 2 Color Change Silk PLA 3D Printer Filament Bundle, Silk Black Color Change To White/Red/Orange/Blue/Purple/Green, Each Spool 250g, Total 1.5kg Silk PLA Bundle By OEM MIKA3D-Fabricante : OEM MIKA3D-Descripcion Original: - 6 hermosos colores; Incluye 6 carretes, 2 filamentos PLA de seda que cambian de color: negro seda a blanco seda; Negro seda a naranja seda; Negro seda a rojo seda; Negro seda a verde seda; Negro seda a azul seda; Negro seda a morado seda; El total es 1,5 kg de PLA de seda 3D, estos colores son muy adecuados para imprimir hermosos objetos de impresión 3D multicolores y brillantes, es una excelente muestra y paquete de regalo para impresión 3D - 2 filamentos PLA con cambio de degradado de color de seda: son 2 tipos de cambio de color; Los 2 cambios de color que cambian de forma gradual harán que varios colores brillantes de seda se mezclen en un filamento de carrete; También este tipo de filamento con superficie sedosa y brillante; Dando un Toque Suave, Nacarado y Único; Obtendrá una hermosa superficie de impresión de varios colores, es perfecta para el campo de la impresión 3D, como bricolaje, industria, educación, etc. - Alta calidad y gran compatibilidad: 1,75 mm de diámetro, alta calidad controlada, utilizamos materia prima de primera calidad para mantener el filamento de alta calidad; Tiene poco olor, no tiene burbujas, se derrite bien, se alimenta suavemente, no se atasca, no se deforma y es fácil de imprimir - Gran compatibilidad: tolerancia de alto diámetro de 1,75 mm, para garantizar una alimentación constante y una impresión suave, es perfectamente compatible con la mayoría de las impresoras 3D FDM y bolígrafos 3D del mercado, como Creality Ender, ANYCUBIC, Flashforge, Monoprice, SCRIB3D, MYNT3D, etc. - Puntas y configuración de impresión 100% libres de enredos: para nuestro filamento, utilizamos la máquina servo, para hacer todo lo posible para que la línea de filamento se enrolle lo más ordenadamente posible, además todos nuestros filamentos están 100% libres de enredos durante la producción. , Después de cada uso, por favor arregle el extremo del filamento, asegúrese de insertar el extremo libre del filamento en los orificios del carrete, para evitar que se enrede la próxima vez; Temperatura de impresión sugerida: 205*C-220*Csu impresion 3d ahora...
  • Filamento Termico 2.85mm 1kg COLOR FOTO-1 IMP 3D [0ITZPLEI]
    Precio:  $210,799.00
    Agregar al Carrito   Vista

    Filamento Termico 2.85mm 1kg COLOR FOTO-1 IMP 3D [0ITZPLEI]

    -Titulo Original : Gizmo Dorks 3mm (2.85mm) ABS Filament 1kg / 2.2lb for 3D Printers, Color Change Green to Yellow-Fabricante : GIZMO DORKS-Descripcion Original: 3mm diameter, 1kg net weight, ABS Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 230 - 240°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...
  • Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [728LNLX7]
    Precio:  $109,529.00
    Agregar al Carrito   Vista

    Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [728LNLX7]

    -Titulo Original : SAINSMART 1.75mm 250g Flexible TPU 3D Printing Filament, Dimensional Accuracy +/- 0.05 mm (Red)-Fabricante : SAINSMART-Descripcion Original: Approximately 250 grams, feet of filament on a spool with a case so it's not flopping all over the place. Splash Spools store easily in a desk drawer, stacked space or even hang on a wall. Be sure you are ordering the correct diameter for your printer. This product is only available in 1.75mm. // Specially formulated plastic with increased amount of flexibility, with rigid structure. Recommended for printing objects, which will be impacted more than normal ones. // SAINSMART filament is 100% TPU. TPU is essentially polyurethane, it belongs to the TPE class of thermoplastics. Recommended for printing objects, which will be impacted more than normal ones. // Flexible Filament does not feed well on all 3D printers. Please check your printer specifications before ordering. Only available in 1.75mm diameter. // It's better to work on direct drive extruders. Please print slowly and read the tips if you are bowden. // Color: SainSmart TPU filament is featured by its high strength and flexibility, like a hybrid of plastic and rubber. 95A TPU has high abrasion resistance and low compression compared to rubber parts, especially at higher infill. In comparison with most common filaments like PLA and ABS, TPU must be run much slower. - Material: Rep-Flex TPU - Vacuumed Sealed with desiccant - Shore Hardness: 95A - Weight: 250g Spool - Diameter: 1.75mm (+/- 0.05mm) - Recommended extruder temperature:195 - 230°C - Recommended platform temperature: 40 - 60°C Recommended for printers with direct drive extruder, 0.4~0.8mm Nozzles. With bowden extruder you might pay more attention to these tips: - Print slow 15-30 mm/s Printing speed - First layer settings. (Height 100% Width 150% speed 50% e.g.) - Retraction disabled. This would reduce messy, stringing or oozing printing result. - Increase Multiplier(Optional). set to 1.1 would help the filament bond well. - Cooling fan on after first layer. If you are having problems printing with soft filaments, firstly, and most importantly, slow the print down, run at 20mm/s will work perfectly. It is important when loading the filament to allow it to only just start extruding. Once you see the filament coming out the nozzle hit stop. The load feature pushes filament through quicker than a normal print and this can cause it to get caught in the extruder gear. Also feed the filament direct to the extruder, not through the feeder tube. This reduces the drag on the filament which can cause the gear to slip on the filament. I 1x SainSmart TPU Flexible Filament 1.75mm 250g(vacuum sealed...
  • Filamento Hatchbox para imprecion 3d 1.75mm 1kg - F Green
    Precio:  $185,339.00
    Agregar al Carrito   Vista

    Filamento Hatchbox para imprecion 3d 1.75mm 1kg - F Green

    -Titulo Original : HATCHBOX 1.75mm Forest Green PLA 3D Printer Filament, 1 KG Spool, Dimensional Accuracy /- 0.03 Mm, 3D Printing Filament-Fabricante : HATCHBOX-Descripcion Original: especificaciones del filamento: tamaño: carrete de 2.20 libras, diametro del filamento de 0.069 pulgadas (precision dimensional de /- 0.001 pulgadas). temperatura: temperatura recomendada de extrusion/boquilla de 356 °f - 410 °f. filamento de acido polilactico facil de usar: libera tu creatividad con nuestro filamento de pla sin complicaciones. diseñado para darte la mejor experiencia de impresion 3d, el filamento de acido polilactico de hatchbox se puede utilizar comodamente en varias impresoras convencionales. con una dureza y fluidez mejoradas, nuestro acido polilactico ofrece amplios rangos de temperatura y velocidad para adaptarse a todas tus necesidades innovadoras. apto para principiantes y expertos: los filamentos para impresora 3d hatchbox estan hechos en funcion de la calidad y la consistencia, por lo que les resulta facil a los usuarios novatos comenzar con ajustes basicos. quienes tengan experiencia en las impresiones pueden llevar sus diseños al limite sin preocuparse por problemas de pureza, tolerancia o impresion. filamentos de impresion 3d de alta calidad: sin obstrucciones, burbujas ni enredos. el acido polilactico de hatchbox esta formulado para ofrecer una deformacion minima y poco o ningun olor sin el uso de una base caliente. el acido polilactico esta sellado al vacio con desecante para evitar la absorcion de humedad, lo que permite una resolucion con un alto nivel de detalle....
  • Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [0GU2H9C4]
    Precio:  $169,769.00
    Agregar al Carrito   Vista

    Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [0GU2H9C4]

    -Titulo Original : Gizmo Dorks 3mm (2.85mm) PLA Filament 1kg / 2.2lb for 3D Printers, Translucent Purple-Fabricante : GIZMO DORKS-Descripcion Original: 3mm diameter, 1kg net weight, PLA Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 200 - 210°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7R55GTKX]
    Precio:  $149,449.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7R55GTKX]

    -Titulo Original : Silk Rainbow PLA Filament 1.75mm 3D Printer Filament 1KG 2.2LB Shiny Silky Shine 3D Printing Materials Shiny Silk Multicolor Rainbow PLA Filament 1.75mm Metallic Gradient 3D Printing Filament-Fabricante : SHENGTIAN-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7Q4RWNW6]
    Precio:  $159,709.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7Q4RWNW6]

    -Titulo Original : Eryone Silk Blue PLA 3D Printer Filament 1.75mm, Dimensional Accuracy +/- 0.05 mm, 1kg (2.2LBS) / Spool-Fabricante : ERYONE-Descripcion Original: Like silk, Highlight shiny silky smooth appearance. // PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant. // 1.75mm filament diameter (dimensional accuracy +/- 0.05mm). // 1 kg (2.2 lbs) /spool. Spool Diameter*Width 20*5.7cm (8*2.2inch). Spool Hub Hole Diameter: 3.15" // Recommended Extrusion/Nozzle Temperature 190 - 230°C (374 - 435°F) // Color: Diameter: 1.75mm Tolerance: +/- 0.05 Print Temperature: 190 - 230°C (374 - 435°F) Recommended Print Speed: 30-60mm/...
  • Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [7XC528PL]
    Precio:  $128,929.00
    Agregar al Carrito   Vista

    Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [7XC528PL]

    -Titulo Original : Silk Antique Gold PLA Filament 3mm (2.85mm) 3D Printer Filament 1KG 2.2LBS Printing Material Silky Gold Filament Metallic Bronze Brass PLA Filaments Materials Shiny Silk Gold Silve Copper-Fabricante : CC3D-Descripcion Original: No need polishing, the surface of the prints is shiny,just look like metal. // Highlight silk pla filament. // Industrial Scientific Additive Manufacturing Products 3D Printing Supplies 3D Printing Filament. // We also offer other colors such as Silk Gold Silk Silver Silk Copper in 2.85mm. // An ancient golden color.The only seller is zhuopu new material. // Product description Color:Silk Antique Gold Diameter (Tolerance): 2.85mm Net Weight: 1000g Recommended Printing Temp: 195 - 230 °C Recommended Printing Speed: 30 - 60 mm/s Heated Bed: Not required but can be used (up to 60 °C) The dimensions of spool: Spool Diameter: 20cm Spool Width: 6.9cm Spool Hub Hole Diameter: 5.3c...
  • Filamento PLA de alta calidad para imprecion 3D - glow Blue
    Precio:  $188,769.00
    Agregar al Carrito   Vista

    Filamento PLA de alta calidad para imprecion 3D - glow Blue

    -Titulo Original : Do3d Glow In Dark Blue Pla 3d Printer Filament, Tidy Winding High Diameter Tolerance 1.75mm Pla, Widely Fit For 3d Printer; 1kg 2.2lbs Cardboard Spool 3d Printing Material, Glowing In Dark Blue Pla-Fabricante : Do3d-Descripcion Original: Filamento PLA de alta calidad que brilla en la oscuridad: brilla en azul oscuro, después de abosorber la luz UV alrededor de media hora. Todas nuestras materias primas son materias primas 100% nuevas, es un buen rendimiento de filamento, más detalles y fácil de imprimir, proporciona una excelente fluorescencia luminosa de piezas impresas; es perfecto para modelos 3D, piezas de vacaciones, decoración, regalo para niños, etc ampliamente compatible: filamento pla de 1.75mm con tolerancia de alto diametro, diseño para adaptarse a la mayoria de impresoras 3d fdm/boligrafo de impresion 3d en el mercado, fabricado con linea de produccion sin obstrucciones para garantizar una experiencia de impresion suave y estable sugerencia de impresion: tolerancia de alto diametro de 1.5mm, diseño para adaptarse a la mayoria de las impresoras 3d fdm/pluma de impresion 3d en el mercado, facil de imprimir; sugiere temperatura de impresion: 210 ºc; sugiere cama termica: 30-60 ºc o no necesario; sugiere tamaño de boquilla de impresora: 0.016 in sin enredos y facil de imprimir: todo el filamento producido por el sistema de control servo, para garantizar el material pla con diametro de consistencia, 100% libre de enredos durante la produccion, sin burbujas, fuerte dureza, imprime mucho mas suavemente paquete: peso neto del filamento 1kg/carrete, 1kg/carrete, sellado al vacio en cada bolsa; tenemos los colores mas populares libres a su eleccion....
  • Filamento PLA 2.85mm 0.2kg COLOR FOTO-1 IMP 3D [74W68P3T]
    Precio:  $66,639.00
    Agregar al Carrito   Vista

    Filamento PLA 2.85mm 0.2kg COLOR FOTO-1 IMP 3D [74W68P3T]

    -Titulo Original : Gizmo Dorks PLA Filament for 3D Printers 3mm (2.85mm) 200g, Grey-Fabricante : GIZMO DORKS-Descripcion Original: PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant // Recommended Nozzle Temperature: 190 - 225 C // 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" // PLA filament is compatible with various 3D printers such as the Monoprice Maker Select, Printrbot, Robo 3D, and many more! // PLA filament is made from the highest quality virgin material. PLA, Polylactic Acid, is created from processing a number of plant products. PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. PLA is a more earth friendly plastic and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. PLA can be sanded and machined. PLA has a lower melting temperature compared to ABS. As a material, PLA has much less warping versus ABS. Additionally, a heated bed is not required to print it. PLA generally enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds.Extrusion Temperature: 190 - 225 CHeated Bed: Not required but recommended at 60 CDiameter: 2.85mm +/- 0.03mmNet Weight: 200 gramsAvailable Colors in 200g Size: Black, Blue, Glow in the Dark, Green, Grey, Orange, Purple, Red, Transparent, and WhiteGizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7H5G4C24]
    Precio:  $139,189.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7H5G4C24]

    -Titulo Original : Silk PLA 3D Printer Filament 1.75mm 1KG 2.2 LBS Spool 3D Printing Material CC3D Shine Silky Shiny Metallic Metal Gold Silver Copper Bronze PLA Filament (Silver Blue)-Fabricante : CC3D-Descripcion Original: PRODUCES THE BEST 3D PRINTS: This 3D printing filament offers excellent dimensional accuracy with no more than 30 microns of diameter variance. This allows for better and more consistent feeding as well as higher quality 3D prints. You can get professional results right from your own 3D printing machines. // HIGHLY COMPATIBLE: We at 3D Solutech are proud to provide you with flexible PLA filament that is compatible with almost all 3D printers, including those from RepRap, MakerBot (such as the Replicator and Replicator 2), Ultimaker, Bits from Bytes, Airwolf 3D, MakerGear, Printrbot, Bukobot, Type A Machines, and many more. // HASSLE-FREE OPERATION: At 3D Solutech, we engineer our 3D printer filament and other materials to adhere to all regulations and standards of quality to ensure trouble-free operation and amazing results. We know that your 3D printer is an expensive investment. That’s why we offer our superior filament to match it rather than forcing you to settle for cheap alternatives. Your choice is clear! // MEETS ALL 3D PRINTING NEEDS: At 3D Solutech, our durable printing filament is highly versatile and can meet all of your 3D printing needs and applications. It comes in a variety of 3 different colors, including white, silver, hot pink, navy blue, and more. No wonder it’s the first choice of engineers and designers! // ENVIRONMENTALLY FRIENDLY: Did you know that our PLA filament is stronger than alternative PLA filaments? It consists of polylactic acid and algae harvested from areas where it harms the environment in excess amounts. Additionally, it requires less energy to print because it requires a low printing temperature. // Color: 3D printing is an emerging field, especially in the areas of design and engineering. Why not stay ahead of it and give life to your dreams with our quality filament at 3D Solutech? With us, you’ll find highly versatile filament to complete your printing kit that is compatible with nearly all 3D printers. At 3D Solutech, we know that you rely on your 3D printer to make your ideas a reality, and our filament is what helps you to do that. 3D Solutech was founded in 2012 with a goal of innovating 3D printing filaments. We have committed ourselves to providing the very finest filaments and color selections to help you carry out successful projects while having fun. We have faith in the future of this method of printing and love doing it ourselves and creating unique objects. We make sure that our products are always affordable to you and that everyone has the opportunity to create and sell on their own. With our 3D printer PLA filament, you’ll know you’re getting the best results. It offers high dimensional accuracy with no more than 30 microns of diameter variance. This allows for better and more consistent feeding as well as higher quality 3D prints, yielding professional results right from your own 3D printing machines. Our PLA printing filament is also stronger and better for the environment than competing 3D printing products. They require less energy to print because they have lower printing temperatures. Enjoy the hassle-free printing experience of quality filament by relying on 3D Solutech today...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7846LFNB]
    Precio:  $169,969.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7846LFNB]

    -Titulo Original : eSUN 1.75mm PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs), Fire Engine Red, (Pantone 199C)-Fabricante : ESUN-Descripcion Original: 1KG net (approximately 2.2 lbs) Filament with Clear Spool, Fire Engine Red, Pantone 199C // eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. // 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm); Fire Engine Red // Recommended Extrusion/Nozzle Temperature 205C - 225C. Most people print at 215 Celsius // Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5" // Color: Color: Fire Engine Red, Pantone 199C. We have several different mix of red filaments, please refer the pictures or pantone code and pick the one you prefer. Extrusion Temperature Range: 205 to 225 Superb layer bonding High rigidity. Good glossiness. Several times tougher than PLA Smoother finished printouts. No cracking or brittle problem. Prints are hard to break. PLA PRO(PLA+) print temperature is about 20 Celsius higher than regular PLA. Other settings are about the same. INTSERVO is dedicated to customer satisfaction. Customers are always welcome to contact us for any questions and/or support needs. We made this color based on customer requests. Your satisfaction is always our No.1 priority...
  • filamento conductivo PLA 1.75mm negro 1kg
    Precio:  $326,869.00
    Agregar al Carrito   Vista

    filamento conductivo PLA 1.75mm negro 1kg

    -Titulo Original : YOUSU Conductive PLA Filament 1.75 Mm For 3D Printer & 3D Pen 1 Kg (2.2 Lbs) Black-Fabricante : Yousu-Descripcion Original: - [Alta conductividad] El PLA conductivo tiene una resistividad de 7 ohm?cm y funciona muy bien para usar como pistas eléctricas para LED, joysticks y otros dispositivos pequeños, la utilidad del filamento en proyectos como llaveros, guantes LED e incluso automóviles. Sensores de nivelación de la cama. - [Tolerancia dimensional +/- 0,03 mm] Los filamentos conductores de la impresora 3D Yousu PLA utilizan un sistema de control autoadaptativo y de medición de diámetro CCD avanzado para controlar el diámetro del filamento a 1,75 (+/- 0,03) mm durante el proceso de producción. Tolerancia mínima y baja deformación para garantizar una alimentación constante e impresiones precisas. - [Sin enredos y sin obstrucciones] Filamento PLA conductor Yousu diseñado y fabricado con una máquina de bobinado ordenada para garantizar una impresión sin enredos y evitar posibles roturas y roturas de líneas, también una impresión más suave y precisa. Todo el filamento pasó por un proceso de secado de 24 horas en una sala termostática antes del embalaje sellado al vacío, no produce burbujas, hilos ni obstrucciones. - [Alta compatibilidad] Compatible con la mayoría de las impresoras 3D FDM con 1,75 mm de diámetro, como: Prusa, MakerBot, Anker, Bambu lab, Creality Ender 3, Flashforge, Raise 3D, QiDi, Anycubic Kobra, Elegoo Neptune, etc. - [Paquete sellado al vacío] Peso neto del filamento: 1 kg (2,2 libras), longitud total: 330-340 m. El filamento Yousu viene en una bolsa de vacío sellada con una bolsa desecante, mantiene fácilmente los filamentos de su impresora 3D en buenas condiciones para imprimirlos sin problemas de humedad. Filamento pla conductor Yousu 1,75 mm. pack 1 unida...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [0ITZP6TI]
    Precio:  $169,769.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [0ITZP6TI]

    -Titulo Original : Gizmo Dorks 1.75mm PLA Filament 1kg / 2.2lb for 3D Printers, Gold-Fabricante : GIZMO DORKS-Descripcion Original: 1.75mm diameter, 1kg net weight, PLA Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 200 - 210°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [6XBNXSZR]
    Precio:  $159,659.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [6XBNXSZR]

    -Titulo Original : WYZworks PLA 1.75mm [ Pink ] Premium Thermoplastic Polylactic Acid 3D Printer Filament - Dimensional Accuracy +/- 0.05mm 1kg / 2.2lb + [ Multiple Color Options Available ]-Fabricante : WYZWORKS-Descripcion Original: THERMOPLASTIC POLYLACTIC ACID [MSDS APPROVED] - With our ultra smooth technology, our filaments are capable to extrude beautifully and smoothly that help to build a more delicate object. Natural PLA Premium Quality MSDS Approved 3D Printer Filament. // HIGH SPECS - PLA [Polylactic Acid] 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) 1 KG (2.20 lbs) Spool 3D Printer Filament Vacuumed Sealed. Quality Black Filament With The Highest Dimensional Accuracy Means The Nozzle Won't Get Blocked. Don't Risk Damaging Your Expensive 3D Printer With Unvetted Filaments. // TEMPERATURE RECOMMENDATION - Recommended Printing Temperature range 170°C - 230°C - PLA allows higher print speed, more accurate placement of material with proper cooling (it does not shrink as much) and also thinner build heights because of less resistance from the plastic coming out the nozzle, where abs even at high temps (252C) is still sticky and has high viscosity. // CUSTOMER SUPPORT - Get The Absolute Best Filament & Support At Half The Cost Of Main Brand Filaments. Save Money Without Risking Your Equipment, Print Quality, & Time! // HIGH COMPATIBLE - For most common 3D printers such as ROBO 3D, Cubify, Leapfrog, MakerBot, Reprap, Afinia, UP, Mendel, flashforge, Solidoodle 2, Printrbot LC, MakerGear M2, Felix, Reprap, Ultimaker and any other 3D printers. //...
Mostrar del 1 al 24 (de 491 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
Destacados
Revisar todos destacados

Información

Información

Nuestras ofertas

Nuestras ofertas

Su cuenta

Su cuenta

Mantente conectado

Mantente conectado

Contáctenos

Contáctenos

elbazardigital.com   © 2024