Arriba

Inicio » Catalogo » Computación » Impresión > Impresión 3D > Filamentos

Impresión > Impresión 3D > Filamentos

Mostrar: 
Mostrar del 1 al 24 (de 481 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • filamento PLA brilla en la oscuridad 1.75mm 1kg -brilla verd
    Precio:  $189,239.00
    Agregar al Carrito   Vista

    filamento PLA brilla en la oscuridad 1.75mm 1kg -brilla verd

    -Titulo Original : GIANTARM Glow In The Dark Green Luminous 1.75mm(±0.03mm) PLA Filament 1kg Spool, High Brightness And Long Time Glow, Christmas Green Fit For Most FDM 3D Printer-Fabricante : GIANTARM-Descripcion Original: - [Brilla en la oscuridad] Este filamento luminoso contiene polvo brillante, que se ve blanco o claro durante el día, pero puede emitir una luz verde increíble en la oscuridad después de absorber la energía de la luz. Sugerimos exponer el modelo a la luz solar intensa o luz ultravioleta durante 30 minutos para obtener un efecto excelente. - [Calidad excelente] Este filamento tiene alta precisión, sin burbujas, sin obstrucciones, sin dibujo, sin olor, tiene alta dureza y alta compatibilidad, compatible con todas las impresoras 3D FDM que usan filamento de 1,75 mm. - [Configuración recomendada] Temperatura de la boquilla: 190-230C (374-446F), Cama caliente: 50-70C (122-158F), Velocidad de impresión: 15-30 mm/s, Tamaño de la boquilla: >0,4 mm (Es mejor), peso neto: 1 kg (2,2 libras) - [Impresión para festivales y fiestas] Los filamentos luminosos PLA se pueden convertir en impresiones que brillan por la noche, lo que es muy adecuado para imprimir decoraciones para fiestas, Acción de Gracias y Navidad, y también para barras luminosas, pantallas de lámparas y modelos, etc. - [Envasado al vacío y postventa] Los filamentos de Giantarm se envasan al vacío con desecante para mantener la humedad baja y evitar la obstrucción de la boquilla. - glow verde cantidad 1...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7HBLG5S7]
    Precio:  $164,629.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7HBLG5S7]

    -Titulo Original : Gizmo Dorks Glitter PLA 3D Printer Filament 1.75mm 1kg, Blue-Fabricante : GIZMO DORKS-Descripcion Original: Glitter PLA nozzle temperature range 195 - 225 C; filament diameter of 1.75 mm +/- .03 mm // Thermoplastic PLA is commonly used in 3D printing because of it's low melting temperature, odorless, and low warp // The uniquely designed clear spool is see through so you can see how much filament material is left and comes with a resealable containment bag to protect filament in between uses // Gizmo Dorks PLA is specially formulated and engineered to prevent and reduce jamming // Spool dimensions are 195 mm x 63 mm with a 55 mm spindle diameter; the net weight of the filament is 1 kg which is 2.2 pounds // Size:  |  Color: Glitter PLA adds a new dimension or sparkle to your print. The PLA glitter colors add a glimmer or twinkle throughout the print creating a unique look. There is a physical speckle dispersed throughout the filament to make your prints stand out. Gizmo Dorks Glitter PLA filament works with a wide range of common 3D printers. PLA (Polylactic Acid) is one of the most commonly used 3D printer material and for good reason. The widely used thermoplastic has a low melting temperature while also being virtually warp free. Glitter PLA does not have an odor like ABS and does not require a heated bed. Getting failed prints because of filament jams is a painful aspect of 3D printing. However, Gizmo Dorks Glitter PLA is specifically engineered to reduce jamming.Glitter PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. Glitter PLA is a more earth friendly plastic. It is stronger and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. Glitter PLA enjoys sharper details and corners compared to ABS without the risk of cracking or warping. Glitter PLA can also be printed at higher throughput speeds...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [71JRPCRJ]
    Precio:  $139,189.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [71JRPCRJ]

    -Titulo Original : NOVAMAKER 3D Printer Filament - Yellow 1.75mm PLA Filament, PLA 1kg(2.2lbs), Dimensional Accuracy +/- 0.03mm-Fabricante : NOVAMAKER-Descripcion Original: 1 kg (2.20 lbs) PLA Filament Vacuumed Sealed With Desiccant // 1.75mm Diameter (Dimensional Accuracy +/- 0.03mm), The temperature range for this Filament Refills is 220-250 °C (428°F-482°F), Best temperature 235°C(455°F). // Printing temperature: 190-220 °C (374°F-428°F), Best temperature 195°C(387°F) // No Bubble and Block Nozzle, Nood Stick Hot Bed, A Smooth PLA Used // Compatible with the following 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, 3doodler (pen), Delta, Mbot, Type A // Color: Diameter :  Tolerance Level :  Print Temperature :  Print Speed :  Base Plate Temperature :  Bubble :  Length :  Spool Diameter: -Spool Width: Spool Hub Hole Diameter: NovaMaker PLA 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.03mm, the consistently round diameters provide optimum flow through the extruder nozzle. The PLA filaments are useful in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp. Compared with traditional brittle PLA, NovaMaker 3D printer filaments have adjusted the degradability of the material for optimal performance. NovaMaker 3D printer filaments comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances. The 1.75mm PLA filament gives off a sweet smell, and it is considered by many as an improvement over hot plastic. Compatible with ALL FDM 3D printers and 3D Pen. Such as AirWolf, Aleph Objects, BCN3D, Beeverycreative, BigBox, CEL, CraftBot, CraftUnique, CubePro, Cubicon, E3D, FlashForge, Lulzbot, MakerBot, Makergear, OrdBot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zortrax, UP! The PLA 3D printer filaments are backed by NovaMaker . Seize the chance to click button right now...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [7VJYL11F]
    Precio:  $154,579.00
    Agregar al Carrito   Vista

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [7VJYL11F]

    -Titulo Original : OVERTURE PETG Filament 1.75mm with 3D Build Surface 200 x 200 mm 3D Printer Consumables, 1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.05 mm, Fit Most FDM Printer (Orange)-Fabricante : OVERTURE-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento Metal 1.75mm 0.2kg COLOR FOTO-1 IMP 3D [74W463LH]
    Precio:  $66,639.00
    Agregar al Carrito   Vista

    Filamento Metal 1.75mm 0.2kg COLOR FOTO-1 IMP 3D [74W463LH]

    -Titulo Original : Gizmo Dorks Metal Bronze Fill Filament for 3D Printers 1.75mm 200g-Fabricante : GIZMO DORKS-Descripcion Original: Metal Bronze (Bronzefill with PLA base) 3D printer filament vacuumed sealed with desiccant // Extrusion nozzle temperature: 190 - 225 C // 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" // Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, and many more. // metal bronze fill filament is a unique filament blend that allows distinct prints with a metallic look and finish. Metal bronze filament is a special mix made by combining real bronze powder with PLA filament, and the filament prints very similar to normal PLA. Bronze filled filament imparts the look and feel of bronze giving the printed part a sculpted bronze finish look. The finished part will look laser sintered. The filament can be printed on either heated or non heated build plates. The suggested build surface to print on is blue painters tape, and there is essentially no warping. If a heated build plate is used, then please set it to 60 C, and the print will have an increased adhesion to the platform. Metal bronze fill filament can also be printed on regular glass, glass with glue stick, or kapton tape.Extrusion Temperature: 190 - 225 CHeated Bed: Not required but recommended at 60 CDiameter: 1.75mmDiameter Range: +/- 0.03mmNet Weight: 200 gramsGizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool...
  • Filamento PLA de alta calidad imprecion 3D - Rainbow
    Precio:  $199,539.00
    Agregar al Carrito   Vista

    Filamento PLA de alta calidad imprecion 3D - Rainbow

    -Titulo Original : DO3D Silk Multicolored Rainbow PLA 3D Printer Filament, 1.75mm PLA Fast Color Change 3D Printing Material, 1kg Spool (2.2lbs),for FDM 3D Printers-Fabricante : DO3D-Descripcion Original: Filamento PLA de alta calidad: nuestro filamento PLA DO3D está hecho de PLA de alta calidad, un material termoplástico conocido por sus excelentes propiedades de impresión. Con una temperatura de fusión más baja y facilidad de uso, nuestro filamento garantiza resultados de impresión suaves y consistentes. Precisión y consistencia dimensionales: garantizamos tolerancias estrictas para nuestros filamentos PLA, con un diámetro de 0.069 in y una precisión dimensional de +/- 0.001 in. Esto asegura que tus impresiones salgan perfectamente cada vez, sin deformación ni encogimiento. Fácil de usar y sin enredos: nuestro filamento PLA está diseñado para ser fácil de usar, con bobinado mecánico completo y examen manual para garantizar que la línea esté ordenada y menos enredada. El diseño de diámetro interior de la bobina más grande permite una fácil alimentación, lo que hace que el proceso de impresión no tenga complicaciones. Sin obstrucciones y sin burbujas: diseñado y fabricado con tecnología sin obstrucciones, nuestro filamento PLA garantiza una excelente unión de capas y una gran fluidez para una extrusión suave y estable. También se seca por completo durante 24 horas antes del embalaje y se sella al vacío con desecantes para protegerlo de la humedad, asegurando que no haya problemas de obstrucción o burbujas durante la impresión. Amplia compatibilidad: nuestro filamento PLA es universalmente compatible con la mayoría de las impresoras 3D FDM de 0.069 in comunes en el mercado. Con estándares de fabricación de alta calidad y una pequeña tolerancia dimensional de +/- 0.001 in, nuestro filamento garantiza un ajuste perfecto con su impresora para un rendimiento de impresión óptimo. ...
  • Filamento HIPS 1.75mm 5kg COLOR FOTO-1 IMP 3D [74WKF32P]
    Precio:  $685,369.00
    Agregar al Carrito   Vista

    Filamento HIPS 1.75mm 5kg COLOR FOTO-1 IMP 3D [74WKF32P]

    -Titulo Original : Gizmo Dorks Hips Filament for 3D Printers 1.75mm 5kg, Gray-Fabricante : GIZMO DORKS-Descripcion Original: HIPS (High Impact Polystyrene) 3D printer filament vacuumed sealed with desiccant // Extrusion nozzle temperature: 225 - 250 C; Recommended to use a heated build platform // 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 5kg / Spool Diameter: 11.75" / Spool Width: 6.25" / Spool Hub Diameter: 1.25" // HIPS filament is compatible with various 3D printers such as the Monoprice Maker Select, Lulzbot, Flash Forge, and many more! // HIPS, High Impact Polystyrene, is very similar to ABS. They share a lot of the same characteristics and qualities. However, one of the biggest differences is the solvent used to dissolve HIPS. Limonene is used with HIPS instead of Acetone for ABS. Since limonene does not affect ABS, HIPS filament is commonly used as a supporting material. HIPS is versatile, economical, and impact resistant as well as a good alternative to ABS.Extrusion Temperature: 225 - 250 CHeated Bed: 80 - 110 CDiameter: 1.75mm +/- 0.03mmNet Weight: 5 kilogramsAvailable Colors in 5kg Size: Black, Gray, WhiteGizmo Dorks has proudly released this filament with a net weight 5 kilograms. The larger amount of filament allows continuous prints without the need to swap out spools. It's perfect for larger builds...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7NKZ49Q7]
    Precio:  $169,969.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7NKZ49Q7]

    -Titulo Original : eSUN Silk PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Blue-Fabricante : ESUN-Descripcion Original: Silk Like -- Gorgeous Silk Finish // eSUN Silk PLA 3D Printer Filament Vacuumed Sealed With Desiccant. // 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm) // Recommended Extrusion/Nozzle Temperature 190C - 220C // 1KG net (approximately 2.2 lbs) Silk PLA Filament with New Black Spool // Color: Color: Blue Extrusion Temperature Range: 190 Celsius to 220 Celsius Bed: 50 Celsius...
  • Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [7GP31WY6]
    Precio:  $134,059.00
    Agregar al Carrito   Vista

    Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [7GP31WY6]

    -Titulo Original : Silk Copper PLA 3 mm (2.85 mm) 3D Printer Filament 1KG 2.2LBA Spool PLA Printing Material Silky Shiny Shine PLA Metal Metallic Red Copper CC3D-Fabricante : CC3D-Descripcion Original: All Product Categories > Industrial & Scientific > Additive Manufacturing Products > 3D Printing Supplies > 3D Printing Filament // Product description Color:Silk Copper Diameter : 2.85mm Net Weight: 1000g Recommended Printing Temp: 195 - 230 °C Recommended Printing Speed: 30 - 60 mm/s Heated Bed: Not required but can be used (up to 60 °C...
  • Filamento de impresoras 3D y boligrafos 3D de 1.75mm-Dorado
    Precio:  $151,529.00
    Agregar al Carrito   Vista

    Filamento de impresoras 3D y boligrafos 3D de 1.75mm-Dorado

    -Titulo Original : OEM MIKA3D 1KG Silk Metalic Shiny Gold PLA 3D Printer Filament, Widely Support For Most 3D Printing Printer, 2.2lbs 1KG 1.75mm 3D Printing Silk PLA Material-Fabricante : OEM MIKA3D-Descripcion Original: - Filamento PLA con superficie brillante de seda: todos nuestros filamentos PLA con brillo de seda le ayudarán a obtener una superficie brillante y gloriosa sin pulir. Hay más de 10 colores populares de brillo brillante de seda gratuitos a su elección, estos colores son muy adecuados para imprimir. Los hermosos artículos de superficie con brillo de seda brillante brindan un excelente acabado superficial de las piezas impresas; Es una superficie brillante con brillo sedoso, que brinda un toque suave, nacarado y único. - Filamento PLA con brillo de seda de alta calidad: todo nuestro PLA de seda está hecho con nueva materia prima 100% ecológica y tiene poco olor, no tiene burbujas, se derrite bien, se alimenta suavemente, no se atasca, no se deforma, es fácil de imprimir y es perfecto. para el campo de la impresión 3D, como bricolaje, industria, educación, etc. - 10 colores brillantes de seda disponibles y gran compatibilidad: tenemos 10 hermosos colores brillantes de seda gratis a su elección; Tolerancia de alto diámetro de 1,75 mm, para garantizar una alimentación constante y una impresión suave, es perfectamente compatible con la mayoría de las impresoras 3D FDM y bolígrafos 3D del mercado, como Creality Ender, ANYCUBIC, Flashforge, Monoprice, SCRIB3D, MYNT3D, etc. - Consejos y configuración de impresión 100% libres de enredos: todos nuestros filamentos están 100% libres de enredos antes de abrir el paquete. Por favor, arregle el extremo del filamento después de cada impresión, asegúrese de insertar el extremo libre del filamento en los orificios del carrete para evitarlo. Estar enredado para usarlo la próxima vez; Para mejorar la calidad de impresión, utilice una nueva boquilla de impresora 3D de más de 0,4 mm - Paquete y garantía: para cada carrete de filamento, se empaqueta con un buen paquete al vacío, cada carrete de filamento pesa neto: 1 kg. Si tiene alguna pregunta, por favor infórmenos en cualquier momento, siempre estaremos aquí para ayudarlo, para brindarle el mejor soporte: haremos nuestro mejor esfuerzo para ayudarlo a obtener un excelente artículo impreso. ¿Quiere comenzar a imprimir en 3D para imprimir el artículo con una superficie brillante como la seda? ¿Para crear los elementos que necesitaba? Nuestra tienda lanza toda la serie de filamentos de impresión 3D Silk PLA, que incluyen más de 10 hermosos colores brillantes de seda, ¡respalda muy bien su innovación y diseño en el mundo de la impresión 3D! # Especificación: Material: Filamento PLA 3D brillante de seda (ácido poliláctico) Precisión del diámetro: 1,75 mm +/-0,05 mm Temperatura de impresión recomendada: 401-446 F (205-230 C) Velocidad de impresión recomendada: 30-60 mm/s; Cama térmica recomendada: 122-140 F(50 C-60 C) Cantidad: un carrete empacado en una caja, el peso neto del filamento del carrete es: 1 kg (2,2 lb) Paquete: cada carrete empacado en una bolsa sellada al vacío, luego en una caja de color *Extra Regalo: una bolsa de muestra de color de filamento PLA, se empaqueta junto con esta caja. Estamos seguros de la calidad de nuestro filamento PLA, contáctenos si tiene algún problema con el artículo, dentro de las 24 horas de respuesta, ¡siempre estaremos aquí para servirle! ¡Para crear arte 3D y comenzar su impresión 3D ahora! Consejos: 1. Es mejor usar una boquilla de 0,4 mm+ o 0,5 mm+ con filamento MIKA3D 2. Empaque el filamento en una bolsa o caja sellada después de su uso 3. Todos nuestros filamentos están 100% libres de enredos antes de abrir el paquete, para evitar problemas de enredos , Inserte el extremo libre del filamento en los orificios del carrete después de cada impresión...
  • Filamento Nylon 2.85mm 1kg COLOR FOTO-1 IMP 3D [0LAJN7V4]
    Precio:  $195,419.00
    Agregar al Carrito   Vista

    Filamento Nylon 2.85mm 1kg COLOR FOTO-1 IMP 3D [0LAJN7V4]

    -Titulo Original : Gizmo Dorks 3mm (2.85mm) Nylon Filament 1kg / 2.2lbs for 3D Printers, Natural Clear-Fabricante : GIZMO DORKS-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento TPU 1.75mm 1kg COLOR FOTO-1 IMP 3D [74DV9JMX]
    Precio:  $159,709.00
    Agregar al Carrito   Vista

    Filamento TPU 1.75mm 1kg COLOR FOTO-1 IMP 3D [74DV9JMX]

    -Titulo Original : PRILINE TPU-1KG 1.75 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1kg Spool, 1.75 mm, Black-Fabricante : PRILINE-Descripcion Original: Material: TPU Flexible (Thermoplastic Polyurethane) - Weight: 1 KG (approximately 2.20 lbs) Spool // Size: 1.75mm Spool Diameter: 7.87" Spool Width: 2.83" Spool Hub Hole Diameter: 2.20" // Recommended Printing Temp/Nozzle Temperature: 190-210°C (374-410°F), Base Plate Temperature: 50°C(122°F) // Performance Advantages: PRILINE TPU Flexible filament is a material that is soft and elastic like rubber, similar to the Flexible TPE but typing easier and harder than TPE. It allows for repeated movement or impact without cracking // Refund Guarantee in 30 Days: We trust our products. If you aren’t happy with our 3D printer filament, tell us and We will arrange a refund for you // Color: 1. PRILINE TPU Flexible filament should be printed at lower speed than normal. And printing nozzle type Direct Drive (motor attached to the nozzle) due to its soft lines. 2. TPU Flexible filament applications include seals, plugs, gaskets, sheets, shoes, key ring case for mobile hands-bike parts shock and wear rubber seal (Wearable Device/Protective applications ). 1. 1 KG (2.20 lbs) Spool 2. 1.75mm Diameter (Dimensional Accuracy +/- 0.03mm) 3. Recommended Printing Temp/Nozzle Temperature: 190-210°C (374-410°F), Base Plate Temperature: 50°C(122°F) 4. Spool Diameter: 7.87 - Spool Width: 2.83 - Spool Hub Hole Diameter: 2.20 5. High Compatible with Your 3D Printer: For common all 1.75 mm specification 3D printers such as Ultimaker, Zortrax, Lulzbot, BCN3D , FlashForge, Makergear, MakerBot, Prusa, CEL, Robo. After each print, we recommended storing printer filament in a sealed plastic bag or box to prevent be affected with moisture....
  • Filamento Hatchbox para imprecion 3d 1.75mm 1kg - P Green
    Precio:  $185,339.00
    Agregar al Carrito   Vista

    Filamento Hatchbox para imprecion 3d 1.75mm 1kg - P Green

    -Titulo Original : HATCHBOX 1.75mm Pastel Green PLA 3D Printer Filament, 1 KG Spool, Dimensional Accuracy /- 0.03 Mm, 3D Printing Filament-Fabricante : HATCHBOX-Descripcion Original: Pastel Green especificaciones del filamento: tamaño: carrete de 2.20 libras, diametro del filamento de 0.069 pulgadas (precision dimensional de /- 0.001 pulgadas). temperatura: temperatura recomendada de extrusion/boquilla de 356 °f - 410 °f. filamento de acido polilactico facil de usar: libera tu creatividad con nuestro filamento de pla sin complicaciones. diseñado para darte la mejor experiencia de impresion 3d, el filamento de acido polilactico de hatchbox se puede utilizar comodamente en varias impresoras convencionales. con una dureza y fluidez mejoradas, nuestro acido polilactico ofrece amplios rangos de temperatura y velocidad para adaptarse a todas tus necesidades innovadoras. apto para principiantes y expertos: los filamentos para impresora 3d hatchbox estan hechos en funcion de la calidad y la consistencia, por lo que les resulta facil a los usuarios novatos comenzar con ajustes basicos. quienes tengan experiencia en las impresiones pueden llevar sus diseños al limite sin preocuparse por problemas de pureza, tolerancia o impresion. filamentos de impresion 3d de alta calidad: sin obstrucciones, burbujas ni enredos. el acido polilactico de hatchbox esta formulado para ofrecer una deformacion minima y poco o ningun olor sin el uso de una base caliente. el acido polilactico esta sellado al vacio con desecante para evitar la absorcion de humedad, lo que permite una resolucion con un alto nivel de detalle....
  • Filamento Policarbonato 1.75mm 0.2kg COLOR FOTO1 IMP 3D 74W4
    Precio:  $71,769.00
    Agregar al Carrito   Vista

    Filamento Policarbonato 1.75mm 0.2kg COLOR FOTO1 IMP 3D 74W4

    -Titulo Original : Gizmo Dorks Polycarbonate Filament for 3D Printers 1.75mm 200g, Blue-Fabricante : GIZMO DORKS-Descripcion Original: Polycarbonate 3D printer filament vacuumed sealed with desiccant is tough, strong filament that has high heat resistance // Extrusion nozzle temperature: 255 - 300 C // 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" // Printed parts made with Gizmo Dorks Polycarbonate filament have increased mechanical strength compared to ABS and PLA // The Gizmo Dorks Polycarbonate filament, also known as PC filament, is an incredibly strong thermoplastic material used in 3D printing. It is a good electrical insulator while having heat-resistant properties. Polycarbonate is used in a whole host of applications such as data storage, phones, eye protection, bullet-proof glass, and more. Polycarbonate has a high temperature resistance for a thermoplastic, and it does not shatter like plexiglass. It tends to bend and deform similar to hard rubber until it eventually breaks. It also has high optical clarity.PC absorbs a lot of moisture in the air. It is a hygroscopic material, and it is best to store in an airtight container when not in use. Even during use the material can become unprintable within a 24 hour print if in a humid environment. Therefore, keeping in an airtight container during printing as well is ideal. Dry filament will print more clear. Filament that has absorbed moisture will print white as well as pop and bubble during the print.Extruding temperature is generally around 260 C, depending on the printer. PC slowly softens when heated, unlike PLA which has a high transition temperature. Slower print speeds are preferred as an increase in temperature is required for faster prints. Polyimide tape (Kapton) should be used on a heated bed, ~120 C. Some users prefer applying glue or superglue on a glass bed and then heating to ~120 C-130 C. Please do not inhale any fumes. Heated up superglue can release toxic fumes, so only use in a well ventilated area.Extrusion Temperature: 255 - 300 CHeated Bed: 100 - 120 CDiameter: 1.75mm +/- 0.03mmColors: Black, Blue, or TransparentNet Weight: 200 gramsGizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to sample the filament quality and color before committing to a larger 1 kilogram spool...
  • Filamento TPU 1.75mm 0.8kg COLOR FOTO-1 IMP 3D [0TI3JUV0]
    Precio:  $199,339.00
    Agregar al Carrito   Vista

    Filamento TPU 1.75mm 0.8kg COLOR FOTO-1 IMP 3D [0TI3JUV0]

    -Titulo Original : SainSmart Orange Flexible TPU 3D Printing Filament, 1.75 mm, 0.8 kg, Dimensional Accuracy +/- 0.05 mm-Fabricante : SAINSMART-Descripcion Original: TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible. // Compatible with all FDM printers on the market that accept 1.75 mm filament. Including Prusa i3, Monoprice MakerSelect, SainSmart xCreality, WanHao & Qidi, and other RepRap printers. // With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament’s tendency to not warp. // Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more! // Color: SainSmart TPU filament is renowned for its high strength and flexibility. With the design freedom of 3D printing, SainSmart filament is the key to bringing your project, whether it be a weekend hobby or prototyping for a Fortune 500 company, from the sketchpad to reality. Each spool of SainSmart TPU filament comes with 0.8 kg/1.76 lb of material. This filament is drawn out to a diameter of 1.75 mm with a dimensional accuracy of +/- 0.05 mm, making it the perfect choice for most printers on the market. Diameter: 1.75 mm Material: Flexible TPU Net Weight: 0.8 kg Shore Hardness: 95 A Print Nozzle: 0.4 – 0.8 mm Extruder Temperature: 195 – 230°C Print Bed Temperature: 40 – 60°C Cooling Fan: On Print Slower: 15 – 30 m/s First Layer Settings: 100% Height. 150% Width, 50% Speed Disable Retraction: Should reduce oozing and stringing Cooling Fan: On after first layer Increase Multiplier: 1.1, should increase bonding Do not over extrude filament when loading. As soon as the filament start protruding from the nozzle, stop. Loading any faster will cause the filament to get caught in extruder gear. Feed the filament directly to the extruder, and not through the feeder tube. This reduces back tension in the filament as well as drag, ensuring proper feeding. 1x SainSmart TPU Flexible Filament 1.75mm 0.8kg vacuum sealed w/ desiccan...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7TF93YYF]
    Precio:  $154,579.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7TF93YYF]

    -Titulo Original : PLA Filament 1.75mm, Geeetech 3D Printer PLA Filament,1.75mm,1kg per Spool,Orange-Fabricante : GEEETECH-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [82WR3G2L]
    Precio:  $118,669.00
    Agregar al Carrito   Vista

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [82WR3G2L]

    -Titulo Original : Transparent Clear Black PETG Filament 1.75mm 1KG 3D Printer Filament 2.2lbs Spool 3D Printing Materials Fit Most FDM Printer-Fabricante : CC3D-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA de alta calidad imprecion 3D - Copper
    Precio:  $172,609.00
    Agregar al Carrito   Vista

    Filamento PLA de alta calidad imprecion 3D - Copper

    -Titulo Original : DO3D Silk Metallic Shiny Copper 3D Printer Filament, 1.75mm PLA 3D Printing Material 1kg 2.2lbs/Spool,for FDM 3D Printer-Fabricante : DO3D-Descripcion Original: filamento pla de alta calidad: nuestro filamento pla do3d esta hecho de pla de alta calidad, un material termoplastico conocido por sus excelentes propiedades de impresion. con una temperatura de fusion mas baja y facilidad de uso, nuestro filamento garantiza resultados de impresion suaves y consistentes. precision y consistencia dimensionales: garantizamos tolerancias estrictas para nuestros filamentos pla, con un diametro de 0.069 in y una precision dimensional de /- 0.001 in. esto asegura que tus impresiones salgan perfectamente cada vez, sin deformacion ni encogimiento. facil de usar y sin enredos: nuestro filamento pla esta diseñado para ser facil de usar, con bobinado mecanico completo y examen manual para garantizar que la linea este ordenada y menos enredada. el diseño de diametro interior de la bobina mas grande permite una facil alimentacion, lo que hace que el proceso de impresion no tenga complicaciones. sin obstrucciones y sin burbujas: diseñado y fabricado con tecnologia sin obstrucciones, nuestro filamento pla garantiza una excelente union de capas y una gran fluidez para una extrusion suave y estable. tambien se seca por completo durante 24 horas antes del embalaje y se sella al vacio con desecantes para protegerlo de la humedad, asegurando que no haya problemas de obstruccion o burbujas durante la impresion. amplia compatibilidad: nuestro filamento pla es universalmente compatible con la mayoria de las impresoras 3d fdm de 0.069 in comunes en el mercado. con estandares de fabricacion de alta calidad y una pequeña tolerancia dimensional de /- 0.001 in, nuestro filamento garantiza un ajuste perfecto con su impresora para un rendimiento de impresion optimo. ...
  • Filamento Policarbonato 2.85mm 0.2kg COLOR FOTO1 IMP 3D 74W7
    Precio:  $71,769.00
    Agregar al Carrito   Vista

    Filamento Policarbonato 2.85mm 0.2kg COLOR FOTO1 IMP 3D 74W7

    -Titulo Original : Gizmo Dorks Polycarbonate Filament for 3D Printers 3mm (2.85mm) 200g, Black-Fabricante : GIZMO DORKS-Descripcion Original: Polycarbonate 3D printer filament vacuumed sealed with desiccant is tough, strong filament that has high heat resistance // Extrusion nozzle temperature: 255 - 300 C // 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" // Printed parts made with Gizmo Dorks Polycarbonate filament have increased mechanical strength compared to ABS and PLA // The Gizmo Dorks Polycarbonate filament, also known as PC filament, is an incredibly strong thermoplastic material used in 3D printing. It is a good electrical insulator while having heat-resistant properties. Polycarbonate is used in a whole host of applications such as data storage, phones, eye protection, bullet-proof glass, and more. Polycarbonate has a high temperature resistance for a thermoplastic, and it does not shatter like plexiglass. It tends to bend and deform similar to hard rubber until it eventually breaks. It also has high optical clarity.PC absorbs a lot of moisture in the air. It is a hygroscopic material, and it is best to store in an airtight container when not in use. Even during use the material can become unprintable within a 24 hour print if in a humid environment. Therefore, keeping in an airtight container during printing as well is ideal. Dry filament will print more clear. Filament that has absorbed moisture will print white as well as pop and bubble during the print.Extruding temperature is generally around 260 C, depending on the printer. PC slowly softens when heated, unlike PLA which has a high transition temperature. Slower print speeds are preferred as an increase in temperature is required for faster prints. Polyimide tape (Kapton) should be used on a heated bed, ~120 C. Some users prefer applying glue or superglue on a glass bed and then heating to ~120 C-130 C. Please do not inhale any fumes. Heated up superglue can release toxic fumes, so only use in a well ventilated area.Extrusion Temperature: 255 - 300 CHeated Bed: 100 - 120 CDiameter: 2.85mm +/- 0.03mmColors: Black, Blue, or TransparentNet Weight: 200 gramsGizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to sample the filament quality and color before committing to a larger 1 kilogram spool...
  • Filamento PLA 1.75mm 0.2kg COLOR FOTO-1 IMP 3D [7HR42Q6K]
    Precio:  $71,769.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 0.2kg COLOR FOTO-1 IMP 3D [7HR42Q6K]

    -Titulo Original : Gizmo Dorks Glitter PLA 3D Printer Filament 1.75mm 200g, Blue-Fabricante : GIZMO DORKS-Descripcion Original: Glitter PLA nozzle temperature range 195 - 225 C; filament diameter of 1.75 mm +/- .03 mm // Thermoplastic PLA is commonly used in 3D printing because of it's low melting temperature, odorless, and low warp // 200 gram net weight is the perfect sample size to try out filament // Gizmo Dorks PLA is specially formulated and engineered to prevent and reduce jamming // Spool dimensions are 6 inches by 1.5 inches with a 2.25 inch spindle diameter; the net weight of the filament is 200 grams // Size:  |  Color: Glitter PLA adds a new dimension or sparkle to your print. The PLA glitter colors add a glimmer or twinkle throughout the print creating a unique look. There is a physical speckle dispersed throughout the filament to make your prints stand out. Gizmo Dorks Glitter PLA filament works with a wide range of common 3D printers. PLA (Polylactic Acid) is one of the most commonly used 3D printer material and for good reason. The widely used thermoplastic has a low melting temperature while also being virtually warp free. Glitter PLA does not have an odor like ABS and does not require a heated bed. Getting failed prints because of filament jams is a painful aspect of 3D printing. However, Gizmo Dorks Glitter PLA is specifically engineered to reduce jamming.Glitter PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. Glitter PLA is a more earth friendly plastic. It is stronger and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. Glitter PLA enjoys sharper details and corners compared to ABS without the risk of cracking or warping. Glitter PLA can also be printed at higher throughput speeds.The 200 gram spool is a perfect sample size to test out and try the filament before committing to a 1 kg version...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7YDN56F2]
    Precio:  $169,969.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7YDN56F2]

    -Titulo Original : Overture PLA Plus (PLA+) Filament 1.75mm PLA Professional Toughness Enhanced PLA Roll with 3D Build Surface 200 × 200mm, Premium PLA 1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.05 mm (Black)-Fabricante : OVERTURE-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento de impresora 3D OEM Mika3d de 1kg Pla negro 1,75mm
    Precio:  $146,149.00
    Agregar al Carrito   Vista

    Filamento de impresora 3D OEM Mika3d de 1kg Pla negro 1,75mm

    -Titulo Original : OEM MIKA3D 1KG Black PLA 1.75mm 3D Printer Filament, Widely Support For FDM 3D Printer/ 3D Pen On Market, High Diameter Tolerance, 2.2lbs 3D Printing Black PLA Material-Fabricante : OEM MIKA3D-Descripcion Original: - Alta calidad y fácil de imprimir: toda nuestra materia prima es material 100% nuevo, respetuoso con el medio ambiente, nuestro filamento PLA 3D es el material más adecuado para que la impresora 3D imprima. No huele, no tiene burbujas, no se atasca, no se deforma, es fácil de imprimir, se derrite bien y se alimenta sin problemas; Tenemos muchos colores y tipos diferentes de filamentos 3D gratuitos a su elección - Gran compatibilidad: 1,75 mm de diámetro, tolerancia de alto diámetro controlada; Perfectamente compatible con la mayoría de las impresoras 3D FDM y bolígrafos 3D del mercado, como Creality Ender, ANYCUBIC, Flashforge, Monoprice, SCRIB3D, MYNT3D, etc. - Consejos y configuración de impresión 100% libres de enredos: todos nuestros filamentos están ampliamente ordenados y 100% libres de enredos antes de abrir el paquete. Por favor, arregle el extremo del filamento después de cada impresión, asegúrese de insertar el extremo libre del filamento en los orificios del carrete. , para evitar enredos para el próximo uso; Sugerir temperatura de impresión: 190-225C - 10 colores disponibles y paquete: el peso neto de cada carrete de filamento es de 1 kg, envasado al vacío con secadores para mantenerlo seco y limpio, alta calidad garantizada, alta tolerancia de diámetro de 1,75 mm; Tenemos 10 hermosos colores sólidos gratuitos a su elección. Pruebe y pruebe nuestro PLA normal para disfrutar de su impresión 3D ahora. - Garantía: Estamos 100% seguros del filamento PLA. Si tiene alguna pregunta, infórmenos en cualquier momento. Siempre estaremos aquí para ayudarlo para brindarle el mejor soporte: haremos todo lo posible para ayudarlo a obtener un excelente Artículo impreso ¿Quiere comenzar a imprimir en 3D para crear los elementos que necesita? Nuestra tienda lanza toda la serie de filamentos de impresión 3D PLA, que incluyen más de 10 hermosos colores sólidos, ¡respalda muy bien su innovación y diseño en el mundo de la impresión 3D! # Especificación: Material: Filamento PLA 3D normal (ácido poliláctico) Precisión del diámetro: 1,75 mm +/- 0,05 mm Temperatura de impresión recomendada: 195-210 C Velocidad de impresión recomendada: 30-100 mm/s; Cantidad: un carrete empacado en una caja, el peso neto del filamento del carrete es: 1 kg (2,2 libras) Paquete: cada carrete empacado en una bolsa sellada al vacío, luego en una caja de color *Regalo adicional: una bolsa de muestra de color de filamento PLA, todo el paquete Junto con esta caja, confiamos en la calidad de nuestro filamento PLA. Contáctenos si tiene algún problema con el artículo. Responderemos dentro de las 24 horas. ¡Siempre estaremos aquí para servirle! ¡Para crear arte 3D y comenzar su impresión 3D ahora...
  • Filamento Policarbonato 1.75mm 0.2kg COLOR FOTO1 IMP 3D 74W1
    Precio:  $71,769.00
    Agregar al Carrito   Vista

    Filamento Policarbonato 1.75mm 0.2kg COLOR FOTO1 IMP 3D 74W1

    -Titulo Original : Gizmo Dorks Polycarbonate Filament for 3D Printers 1.75mm 200g, Transparent-Fabricante : GIZMO DORKS-Descripcion Original: Polycarbonate 3D printer filament vacuumed sealed with desiccant is tough, strong filament that has high heat resistance // Extrusion nozzle temperature: 255 - 300 C // 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" // Printed parts made with Gizmo Dorks Polycarbonate filament have increased mechanical strength compared to ABS and PLA // The Gizmo Dorks Polycarbonate filament, also known as PC filament, is an incredibly strong thermoplastic material used in 3D printing. It is a good electrical insulator while having heat-resistant properties. Polycarbonate is used in a whole host of applications such as data storage, phones, eye protection, bullet-proof glass, and more. Polycarbonate has a high temperature resistance for a thermoplastic, and it does not shatter like plexiglass. It tends to bend and deform similar to hard rubber until it eventually breaks. It also has high optical clarity.PC absorbs a lot of moisture in the air. It is a hygroscopic material, and it is best to store in an airtight container when not in use. Even during use the material can become unprintable within a 24 hour print if in a humid environment. Therefore, keeping in an airtight container during printing as well is ideal. Dry filament will print more clear. Filament that has absorbed moisture will print white as well as pop and bubble during the print.Extruding temperature is generally around 260 C, depending on the printer. PC slowly softens when heated, unlike PLA which has a high transition temperature. Slower print speeds are preferred as an increase in temperature is required for faster prints. Polyimide tape (Kapton) should be used on a heated bed, ~120 C. Some users prefer applying glue or superglue on a glass bed and then heating to ~120 C-130 C. Please do not inhale any fumes. Heated up superglue can release toxic fumes, so only use in a well ventilated area.Extrusion Temperature: 255 - 300 CHeated Bed: 100 - 120 CDiameter: 1.75mm +/- 0.03mmColors: Black, Blue, or TransparentNet Weight: 200 gramsGizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to sample the filament quality and color before committing to a larger 1 kilogram spool...
  • Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [72LYRQ84]
    Precio:  $109,529.00
    Expira: 17/06/2021
    Agregar al Carrito   Vista

    Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [72LYRQ84]

    -Titulo Original : SAINSMART 1.75mm 250g Flexible TPU 3D Printing Filament, Dimensional Accuracy +/- 0.05 mm (Green)-Fabricante : SAINSMART-Descripcion Original: Approximately 250 grams, feet of filament on a spool with a case so it's not flopping all over the place. Splash Spools store easily in a desk drawer, stacked space or even hang on a wall. Be sure you are ordering the correct diameter for your printer. This product is only available in 1.75mm. // Specially formulated plastic with increased amount of flexibility, with rigid structure. Recommended for printing objects, which will be impacted more than normal ones. // SAINSMART filament is 100% TPU. TPU is essentially polyurethane, it belongs to the TPE class of thermoplastics. Recommended for printing objects, which will be impacted more than normal ones. // Flexible Filament does not feed well on all 3D printers. Please check your printer specifications before ordering. Only available in 1.75mm diameter. // It's better to work on direct drive extruders. Please print slowly and read the tips if you are bowden. // Color: SainSmart TPU filament is featured by its high strength and flexibility, like a hybrid of plastic and rubber. 95A TPU has high abrasion resistance and low compression compared to rubber parts, especially at higher infill. In comparison with most common filaments like PLA and ABS, TPU must be run much slower. - Material: Rep-Flex TPU - Vacuumed Sealed with desiccant - Shore Hardness: 95A - Weight: 250g Spool - Diameter: 1.75mm (+/- 0.05mm) - Recommended extruder temperature:195 - 230°C - Recommended platform temperature: 40 - 60°C Recommended for printers with direct drive extruder, 0.4~0.8mm Nozzles. With bowden extruder you might pay more attention to these tips: - Print slow 15-30 mm/s Printing speed - First layer settings. (Height 100% Width 150% speed 50% e.g.) - Retraction disabled. This would reduce messy, stringing or oozing printing result. - Increase Multiplier(Optional). set to 1.1 would help the filament bond well. - Cooling fan on after first layer. If you are having problems printing with soft filaments, firstly, and most importantly, slow the print down, run at 20mm/s will work perfectly. It is important when loading the filament to allow it to only just start extruding. Once you see the filament coming out the nozzle hit stop. The load feature pushes filament through quicker than a normal print and this can cause it to get caught in the extruder gear. Also feed the filament direct to the extruder, not through the feeder tube. This reduces the drag on the filament which can cause the gear to slip on the filament. I 1x SainSmart TPU Flexible Filament 1.75mm 250g(vacuum sealed...
Mostrar del 1 al 24 (de 481 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
Destacados
Revisar todos destacados

Información

Información

Nuestras ofertas

Nuestras ofertas

Su cuenta

Su cuenta

Mantente conectado

Mantente conectado

Contáctenos

Contáctenos

elbazardigital.com   © 2024