Arriba

Inicio » Catalogo » Computación » Impresión > Impresión 3D > Filamentos

Impresión > Impresión 3D > Filamentos

Mostrar: 
Mostrar del 1 al 24 (de 456 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Filamento Hatchbox para imprecion 3d 1.75mm 1kg - Green
    Precio:  $185,339.00
    Agregar al Carrito   Vista

    Filamento Hatchbox para imprecion 3d 1.75mm 1kg - Green

    -Titulo Original : HATCHBOX 1.75mm Green PLA 3D Printer Filament, 1 KG Spool, Dimensional Accuracy /- 0.03 Mm, 3D Printing Filament-Fabricante : HATCHBOX-Descripcion Original: especificaciones del filamento: tamaño: carrete de 2.20 libras, diametro del filamento de 0.069 pulgadas (precision dimensional de /- 0.001 pulgadas). temperatura: temperatura recomendada de extrusion/boquilla de 356 °f - 410 °f. filamento de acido polilactico facil de usar: libera tu creatividad con nuestro filamento de pla sin complicaciones. diseñado para darte la mejor experiencia de impresion 3d, el filamento de acido polilactico de hatchbox se puede utilizar comodamente en varias impresoras convencionales. con una dureza y fluidez mejoradas, nuestro acido polilactico ofrece amplios rangos de temperatura y velocidad para adaptarse a todas tus necesidades innovadoras. apto para principiantes y expertos: los filamentos para impresora 3d hatchbox estan hechos en funcion de la calidad y la consistencia, por lo que les resulta facil a los usuarios novatos comenzar con ajustes basicos. quienes tengan experiencia en las impresiones pueden llevar sus diseños al limite sin preocuparse por problemas de pureza, tolerancia o impresion. filamentos de impresion 3d de alta calidad: sin obstrucciones, burbujas ni enredos. el acido polilactico de hatchbox esta formulado para ofrecer una deformacion minima y poco o ningun olor sin el uso de una base caliente. el acido polilactico esta sellado al vacio con desecante para evitar la absorcion de humedad, lo que permite una resolucion con un alto nivel de detalle....
  • Filamento HIPS 2.85mm 1kg COLOR FOTO-1 IMP 3D [0GU2NMQQ]
    Precio:  $149,249.00
    Agregar al Carrito   Vista

    Filamento HIPS 2.85mm 1kg COLOR FOTO-1 IMP 3D [0GU2NMQQ]

    -Titulo Original : Gizmo Dorks 3mm (2.85mm) Hips Filament 1kg / 2.2lb for 3D Printers, White-Fabricante : GIZMO DORKS-Descripcion Original: 3mm diameter, 1kg net weight, HIPS Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 210 - 230°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...
  • Filamento PLA 1.75mm 0.5kg COLOR FOTO-1 IMP 3D [7S85K1HK]
    Precio:  $230,569.00
    Expira: 17/11/2021
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 0.5kg COLOR FOTO-1 IMP 3D [7S85K1HK]

    -Titulo Original : 3D Printer Silk Shiny Coffee Gold Black Gold Rose Gold PLA Filament 3 in 1 Bundle, 1.75mm 3D Printing Material 0.5kg Spool Total 3 Spools 1.5kgs Filament Pack MIKA3D-Fabricante : MIKA3D-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • filamento para impresora 3d pla acero inoxidable 1.75mm500g
    Precio:  $305,229.00
    Agregar al Carrito   Vista

    filamento para impresora 3d pla acero inoxidable 1.75mm500g

    -Titulo Original : Protopasta 3D Printer Filament, PLA Filament 1.75mm, Stainless Steel Filled PLA, 500g Spool-Fabricante : Protopasta-Descripcion Original: - Versátil - ¡El PLA relleno de acero inoxidable se puede pulir para que parezca metal pulido! también es 2X la Densidad de PLA para impresiones de sensación sustancial La flexibilidad de este filamento PLA de 1.75 le brinda versatilidad y durabilidad para piezas hermosas de la mayoría de las impresoras 3D estándar. - Variedad de acabados: en forma inacabada, las impresiones parecen metal fundido. Con la opción de tratamiento térmico, cepillo de alambre o pulido, este filamento 1.75 le brinda muchas opciones diferentes para darle a su producto terminado una apariencia diferente. - Alta calidad: Proto-pasta ofrece solo PLA de filamento de impresora 3D de alta calidad fabricado en EE. UU. Nuestro PLA de acero inoxidable es bastante denso en comparación con el PLA estándar. Usando solo materiales de primera calidad con un enfoque en la artesanía, este PLA 1.75 es uno en el que puede confiar para hacer el trabajo. - Más fácil de usar: este filamento PLA de 1,75 mm se ha optimizado para el flujo y tiene menos humedad que los PLA estándar para ayudar a evitar la absorción de calor y mantener el flujo másico. Esta combinación de características hace que sea más fácil de usar que la mayoría de los PLA estándar. - Ampliamente compatible: diseñado para funcionar con la mayoría de las impresoras 3D estándar, este filamento 3D PLA 1.75 tiene una amplia gama de compatibilidad que le permite administrar un negocio o simplemente crear piezas premium en la comodidad de su hogar. Presentamos PLA relleno de acero inoxidable. Es un material denso que se imprime tan fácilmente como el PLA estándar, pero da como resultado impresiones pesadas que se pueden terminar después de la impresión para lograr resultados sorprendentes. - ¡Perfecto para joyas, disfraces, accesorios, figuritas, manualidades, robots y más! - El PLA de acero inoxidable Protopasta es un compuesto de PLA Natureworks 4043D y acero inoxidable en polvo finamente molido. En forma de filamento, es bastante frágil y debe manipularse con cuidado para evitar que se rompa. Material Base de datos Resina: PLA Tamaño de partícula: menos de 250 micras (0,25 mm) Olor: bajo o nulo Densidad: 2,4 g/cm3 (2400 kg/m3) Longitud (500 g): 90 m (1,75 mm) y 36 m (2,85 mm) Tratamiento térmico: 110C (225F) durante 10 min o según sea necesario para obtener el resultado deseado Pérdida total de rigidez (antes del tratamiento térmico): 50-60C (Tg) Pérdida total de rigidez (después del tratamiento térmico): 150-175C (fusión) Dimensión (antes del tratamiento térmico): 0 % X/Y/Z Cambio de dimensión (después del tratamiento térmico): 1,5 % de contracción X/Y y 1 % de crecimiento típico de Z, pero calcule y confirme para su impresión y proceso específicos Configuración de la impresora Velocidad: 10 -20 mm/s 1.ª capa, 20-80 mm/s el resto de la pieza Punto de ajuste de la boquilla: 185-215 °C (más caliente en la 1.ª capa para una mejor adhesión) Boquilla real: mantenga el punto de ajuste, reduzca la velocidad si es inferior a Tipo de boquilla: Estándar o resistente al desgaste para uso prolongado Diámetro de la boquilla: se prefiere 0,6 mm o más grande, 0,4 mm está bien con un mínimo de 0,25 mm para expertos Grosor de la capa: se recomienda 0,15-0,20 mm para lograr un equilibrio entre calidad, confiabilidad y productividad Be d Temp (si está disponible, no se requiere): 50* C...
  • Filamento Metal 1.75mm 0.2kg COLOR FOTO-1 IMP 3D [74W463LH]
    Precio:  $66,639.00
    Agregar al Carrito   Vista

    Filamento Metal 1.75mm 0.2kg COLOR FOTO-1 IMP 3D [74W463LH]

    -Titulo Original : Gizmo Dorks Metal Bronze Fill Filament for 3D Printers 1.75mm 200g-Fabricante : GIZMO DORKS-Descripcion Original: Metal Bronze (Bronzefill with PLA base) 3D printer filament vacuumed sealed with desiccant // Extrusion nozzle temperature: 190 - 225 C // 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" // Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, and many more. // metal bronze fill filament is a unique filament blend that allows distinct prints with a metallic look and finish. Metal bronze filament is a special mix made by combining real bronze powder with PLA filament, and the filament prints very similar to normal PLA. Bronze filled filament imparts the look and feel of bronze giving the printed part a sculpted bronze finish look. The finished part will look laser sintered. The filament can be printed on either heated or non heated build plates. The suggested build surface to print on is blue painters tape, and there is essentially no warping. If a heated build plate is used, then please set it to 60 C, and the print will have an increased adhesion to the platform. Metal bronze fill filament can also be printed on regular glass, glass with glue stick, or kapton tape.Extrusion Temperature: 190 - 225 CHeated Bed: Not required but recommended at 60 CDiameter: 1.75mmDiameter Range: +/- 0.03mmNet Weight: 200 gramsGizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool...
  • Filamento De Limpieza 1.75mm 1kg COLOR FOTO1 IMP 3D 746J454J
    Precio:  $93,019.00
    Agregar al Carrito   Vista

    Filamento De Limpieza 1.75mm 1kg COLOR FOTO1 IMP 3D 746J454J

    -Titulo Original : NovaMaker 3D Printer Cleaning Filament 1.75mm Natural, 0.1kg(0.22lb), Dimensional Accuracy +/- 0.05mm,-Fabricante : NOVAMAKER-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7TRPTYD7]
    Precio:  $180,229.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7TRPTYD7]

    -Titulo Original : Hello3D PLA 3D Printer Filament 1.75mm, Glow In The Dark Green OEM Filament, 3D Printing GID Filament 1KG (2.2Lbs) Spool Luminous Green-Fabricante : HELLO3...
  • Filamento PLA 1.75mm 0.2kg COLOR FOTO-1 IMP 3D [74W2TNKB]
    Precio:  $143,589.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 0.2kg COLOR FOTO-1 IMP 3D [74W2TNKB]

    -Titulo Original : Gizmo Dorks PLA Filament for 3D Printers 1.75mm 200g, 4 Color Pack - Black, Grey, Transparent, White-Fabricante : GIZMO DORKS-Descripcion Original: PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant // Recommended Nozzle Temperature: 190 - 225 C; Filament diameter - 1.75mm // Net weight: 200 grams / Spool Diameter: 6" / Spool Width: 1.5" / Spool Hub Diameter: 2.25" // PLA filament is compatible with various 3D printers such as the Monoprice Maker Select, Lulzbot, Flash Forge, and many more // Color pack contains 4 spools, each spool contains 200g of filament. Colors: Black, Grey, Transparent, White //...
  • Filamento PLA de alta calidad imprecion 3D - Copper
    Precio:  $172,609.00
    Agregar al Carrito   Vista

    Filamento PLA de alta calidad imprecion 3D - Copper

    -Titulo Original : DO3D Silk Metallic Shiny Copper 3D Printer Filament, 1.75mm PLA 3D Printing Material 1kg 2.2lbs/Spool,for FDM 3D Printer-Fabricante : DO3D-Descripcion Original: filamento pla de alta calidad: nuestro filamento pla do3d esta hecho de pla de alta calidad, un material termoplastico conocido por sus excelentes propiedades de impresion. con una temperatura de fusion mas baja y facilidad de uso, nuestro filamento garantiza resultados de impresion suaves y consistentes. precision y consistencia dimensionales: garantizamos tolerancias estrictas para nuestros filamentos pla, con un diametro de 0.069 in y una precision dimensional de /- 0.001 in. esto asegura que tus impresiones salgan perfectamente cada vez, sin deformacion ni encogimiento. facil de usar y sin enredos: nuestro filamento pla esta diseñado para ser facil de usar, con bobinado mecanico completo y examen manual para garantizar que la linea este ordenada y menos enredada. el diseño de diametro interior de la bobina mas grande permite una facil alimentacion, lo que hace que el proceso de impresion no tenga complicaciones. sin obstrucciones y sin burbujas: diseñado y fabricado con tecnologia sin obstrucciones, nuestro filamento pla garantiza una excelente union de capas y una gran fluidez para una extrusion suave y estable. tambien se seca por completo durante 24 horas antes del embalaje y se sella al vacio con desecantes para protegerlo de la humedad, asegurando que no haya problemas de obstruccion o burbujas durante la impresion. amplia compatibilidad: nuestro filamento pla es universalmente compatible con la mayoria de las impresoras 3d fdm de 0.069 in comunes en el mercado. con estandares de fabricacion de alta calidad y una pequeña tolerancia dimensional de /- 0.001 in, nuestro filamento garantiza un ajuste perfecto con su impresora para un rendimiento de impresion optimo. ...
  • Filamento ABS 1.75mm 0.2kg COLOR FOTO-1 IMP 3D [7CZ5MMGB]
    Precio:  $66,639.00
    Agregar al Carrito   Vista

    Filamento ABS 1.75mm 0.2kg COLOR FOTO-1 IMP 3D [7CZ5MMGB]

    -Titulo Original : Gizmo Dorks ABS Filament 1.75mm 200g for 3D Printing, Black Light Reactive Fluorescent Yellow-Fabricante : GIZMO DORKS-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 1.75mm 0.2kg COLOR FOTO-1 IMP 3D [7HR42Q6K]
    Precio:  $71,769.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 0.2kg COLOR FOTO-1 IMP 3D [7HR42Q6K]

    -Titulo Original : Gizmo Dorks Glitter PLA 3D Printer Filament 1.75mm 200g, Blue-Fabricante : GIZMO DORKS-Descripcion Original: Glitter PLA nozzle temperature range 195 - 225 C; filament diameter of 1.75 mm +/- .03 mm // Thermoplastic PLA is commonly used in 3D printing because of it's low melting temperature, odorless, and low warp // 200 gram net weight is the perfect sample size to try out filament // Gizmo Dorks PLA is specially formulated and engineered to prevent and reduce jamming // Spool dimensions are 6 inches by 1.5 inches with a 2.25 inch spindle diameter; the net weight of the filament is 200 grams // Size:  |  Color: Glitter PLA adds a new dimension or sparkle to your print. The PLA glitter colors add a glimmer or twinkle throughout the print creating a unique look. There is a physical speckle dispersed throughout the filament to make your prints stand out. Gizmo Dorks Glitter PLA filament works with a wide range of common 3D printers. PLA (Polylactic Acid) is one of the most commonly used 3D printer material and for good reason. The widely used thermoplastic has a low melting temperature while also being virtually warp free. Glitter PLA does not have an odor like ABS and does not require a heated bed. Getting failed prints because of filament jams is a painful aspect of 3D printing. However, Gizmo Dorks Glitter PLA is specifically engineered to reduce jamming.Glitter PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. Glitter PLA is a more earth friendly plastic. It is stronger and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. Glitter PLA enjoys sharper details and corners compared to ABS without the risk of cracking or warping. Glitter PLA can also be printed at higher throughput speeds.The 200 gram spool is a perfect sample size to test out and try the filament before committing to a 1 kg version...
  • Filamento de impresora 3D OEM Mika3d de 1kg Pla negro 1,75mm
    Precio:  $146,149.00
    Agregar al Carrito   Vista

    Filamento de impresora 3D OEM Mika3d de 1kg Pla negro 1,75mm

    -Titulo Original : OEM MIKA3D 1KG Black PLA 1.75mm 3D Printer Filament, Widely Support For FDM 3D Printer/ 3D Pen On Market, High Diameter Tolerance, 2.2lbs 3D Printing Black PLA Material-Fabricante : OEM MIKA3D-Descripcion Original: - Alta calidad y fácil de imprimir: toda nuestra materia prima es material 100% nuevo, respetuoso con el medio ambiente, nuestro filamento PLA 3D es el material más adecuado para que la impresora 3D imprima. No huele, no tiene burbujas, no se atasca, no se deforma, es fácil de imprimir, se derrite bien y se alimenta sin problemas; Tenemos muchos colores y tipos diferentes de filamentos 3D gratuitos a su elección - Gran compatibilidad: 1,75 mm de diámetro, tolerancia de alto diámetro controlada; Perfectamente compatible con la mayoría de las impresoras 3D FDM y bolígrafos 3D del mercado, como Creality Ender, ANYCUBIC, Flashforge, Monoprice, SCRIB3D, MYNT3D, etc. - Consejos y configuración de impresión 100% libres de enredos: todos nuestros filamentos están ampliamente ordenados y 100% libres de enredos antes de abrir el paquete. Por favor, arregle el extremo del filamento después de cada impresión, asegúrese de insertar el extremo libre del filamento en los orificios del carrete. , para evitar enredos para el próximo uso; Sugerir temperatura de impresión: 190-225C - 10 colores disponibles y paquete: el peso neto de cada carrete de filamento es de 1 kg, envasado al vacío con secadores para mantenerlo seco y limpio, alta calidad garantizada, alta tolerancia de diámetro de 1,75 mm; Tenemos 10 hermosos colores sólidos gratuitos a su elección. Pruebe y pruebe nuestro PLA normal para disfrutar de su impresión 3D ahora. - Garantía: Estamos 100% seguros del filamento PLA. Si tiene alguna pregunta, infórmenos en cualquier momento. Siempre estaremos aquí para ayudarlo para brindarle el mejor soporte: haremos todo lo posible para ayudarlo a obtener un excelente Artículo impreso ¿Quiere comenzar a imprimir en 3D para crear los elementos que necesita? Nuestra tienda lanza toda la serie de filamentos de impresión 3D PLA, que incluyen más de 10 hermosos colores sólidos, ¡respalda muy bien su innovación y diseño en el mundo de la impresión 3D! # Especificación: Material: Filamento PLA 3D normal (ácido poliláctico) Precisión del diámetro: 1,75 mm +/- 0,05 mm Temperatura de impresión recomendada: 195-210 C Velocidad de impresión recomendada: 30-100 mm/s; Cantidad: un carrete empacado en una caja, el peso neto del filamento del carrete es: 1 kg (2,2 libras) Paquete: cada carrete empacado en una bolsa sellada al vacío, luego en una caja de color *Regalo adicional: una bolsa de muestra de color de filamento PLA, todo el paquete Junto con esta caja, confiamos en la calidad de nuestro filamento PLA. Contáctenos si tiene algún problema con el artículo. Responderemos dentro de las 24 horas. ¡Siempre estaremos aquí para servirle! ¡Para crear arte 3D y comenzar su impresión 3D ahora...
  • Filamento Acetal 2.85mm 1kg COLOR FOTO-1 IMP 3D [0LAJNH14]
    Precio:  $180,029.00
    Agregar al Carrito   Vista

    Filamento Acetal 2.85mm 1kg COLOR FOTO-1 IMP 3D [0LAJNH14]

    -Titulo Original : Gizmo Dorks 3mm (2.85mm) Acetal Delrin Filament POM 1kg / 2.2lbs for 3D Printers, Black-Fabricante : GIZMO DORKS-Descripcion Original: High quality acetal 3D printer filament comes vacuum sealed with a desiccant pack // POM filament temperatures - hot end nozzle: 210 - 220 C; bed temperature: 110 C // Acetal printed parts have great strength and low friction, ideal for impact parts or gear wheels // Acetal warps during the print so an enclosed printer (can be simple cardboard over printer) and a heated bed are recommended // Only use in well ventilated areas or ventilated systems // Polyoxymethylene (POM) filament is also known as Acetal or Polyacetal. It is a commonly used thermoplastic to engineer specific parts. Acetal filament has high stiffness, low friction, and excellent wear resistance. It has good elastic resilience and great dimensional stability. The filament has good chemical and heat resistance. Because of it's low friction, POM is routinely used as gear wheels, ball bearings, etc. It has high impact resistance, which is one of the reasons the M16 rifle's stock is made out of POM.Extrusion Settings - The recommended print temperature is between 210 C - 220 C. Please note that acetal degrades when overheated and may give off small amounts of formaldehyde gas. Do not keep acetal heated above 230 C. Therefore, please always use in a well ventilated area or in a ventilation system.Print Bed - The hardest part to printing acetal filament is getting the first layer to adhere. POM filament does not typically adhere to conventional 3D print bed surfaces. Some users have found success with blue painters tape with hairspray on top (different blue tapes and hairspray brands have different results). However, POM filament prefers wood or cellulose based platforms. Thicker weight paper such as resume paper or sketch paper can be glued to borosilicate glass with Elmer's glue stick. A heated bed should be used to at least 100 - 110 C.Special Note - POM filament warps a lot. An enclosed chamber should be used to retain heat for better layer adhesion and reduce delamination issues. Please keep acetal away from moisture and always keep filament in an airtight container with a desiccant.Extrusion Temperature: 210 - 220 CHeated Bed: 110 CPrint speeds : 30mm/sDiameter: 2.85mm +/- 0.03mmNet Weight: 1 kilogramAvailable Colors in 200g Size: Black and Whit...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [71JRM93X]
    Precio:  $128,929.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [71JRM93X]

    -Titulo Original : NOVAMAKER 3D Printer Filament - Grey 1.75mm PLA Filament, PLA 1kg(2.2lbs),Dimensional Accuracy +/- 0.03mm-Fabricante : NOVAMAKER-Descripcion Original: 1 kg (2.20 lbs) PLA Filament Vacuumed Sealed With Desiccant // 1.75mm Diameter (Dimensional Accuracy +/- 0.03mm), The temperature range for this Filament Refills is 220-250 °C (428°F-482°F), Best temperature 235°C(455°F). // Printing temperature: 190-220 °C (374°F-428°F), Best temperature 195°C(389°F) // No Bubble and Block Nozzle, Nood Stick Hot Bed, A Smooth PLA Used // Compatible with the following 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, 3doodler (pen), Delta, Mbot, Type A // Color: Diameter :  Tolerance Level :  Print Temperature :  Print Speed :  Base Plate Temperature :  Bubble :  Length :  Spool Diameter: -Spool Width: Spool Hub Hole Diameter: NovaMaker PLA 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.03mm, the consistently round diameters provide optimum flow through the extruder nozzle. The PLA filaments are useful in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp. Compared with traditional brittle PLA, NovaMaker 3D printer filaments have adjusted the degradability of the material for optimal performance. NovaMaker 3D printer filaments comply with the Restriction of Hazardous Substance (RoHS) directive and are free from potentially hazardous substances. The 1.75mm PLA filament gives off a sweet smell, and it is considered by many as an improvement over hot plastic. Compatible with ALL FDM 3D printers and 3D Pen. Such as AirWolf, Aleph Objects, BCN3D, Beeverycreative, BigBox, CEL, CraftBot, CraftUnique, CubePro, Cubicon, E3D, FlashForge, Lulzbot, MakerBot, Makergear, OrdBot, Prusa, Prusa Research, Robo 3D, SeeMeCNC, Simplify3D, SOLS, Ultimaker, XYZprinting, Zortrax, UP! The PLA 3D printer filaments are backed by NovaMaker . Seize the chance to click button right now...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [83PYVP5C]
    Precio:  $180,229.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [83PYVP5C]

    -Titulo Original : SUNLU PLA Silk Black Filament 1.75mm 3D Printer Filament, 1KG 2.2 LBS Spool, Shiny Metallic PLA Silk Filament-Fabricante : SUNLU-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [7XC528PL]
    Precio:  $128,929.00
    Agregar al Carrito   Vista

    Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [7XC528PL]

    -Titulo Original : Silk Antique Gold PLA Filament 3mm (2.85mm) 3D Printer Filament 1KG 2.2LBS Printing Material Silky Gold Filament Metallic Bronze Brass PLA Filaments Materials Shiny Silk Gold Silve Copper-Fabricante : CC3D-Descripcion Original: No need polishing, the surface of the prints is shiny,just look like metal. // Highlight silk pla filament. // Industrial Scientific Additive Manufacturing Products 3D Printing Supplies 3D Printing Filament. // We also offer other colors such as Silk Gold Silk Silver Silk Copper in 2.85mm. // An ancient golden color.The only seller is zhuopu new material. // Product description Color:Silk Antique Gold Diameter (Tolerance): 2.85mm Net Weight: 1000g Recommended Printing Temp: 195 - 230 °C Recommended Printing Speed: 30 - 60 mm/s Heated Bed: Not required but can be used (up to 60 °C) The dimensions of spool: Spool Diameter: 20cm Spool Width: 6.9cm Spool Hub Hole Diameter: 5.3c...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [746F9C52]
    Precio:  $123,799.00
    Agregar al Carrito   Vista

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [746F9C52]

    -Titulo Original : NOVAMAKER 3D Printer Filament - Blue 1.75mm PETG Filament, PETG 1kg(2.2lbs), Dimensional Accuracy +/- 0.03mm-Fabricante : NOVAMAKER-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7QDLYXFT]
    Precio:  $154,579.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7QDLYXFT]

    -Titulo Original : PLA Filament 1.75mm Silk Yellow, Geeetech Silk 3D Printer Filament PLA 1.75mm for 3D Printer and 3D Pen, 1kg 1 Spool-Fabricante : GEEETECH-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [0ZAUQZTA]
    Precio:  $169,969.00
    Agregar al Carrito   Vista

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [0ZAUQZTA]

    -Titulo Original : eSUN 3D 1.75mm PETG Black Filament 1kg (2.2lb), PETG 3D Printer Filament, 1.75mm Solid Opaque Black-Fabricante : ESUN-Descripcion Original: 1KG net (approximately 2.2 lbs) Filament with Clear Spool // eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant // 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) // Recommended Extrusion/Nozzle Temperature 240C - 255C // Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5" // Extrusion Temperature Range: 240 to 255 Celsius Plate temperature: 80~90 Celsius or without heated Printing speed: 30~60mm/s Moving speed: 30~60mm/s 10 Solid/Opaque Colors(Solid Black, Solid White , Solid Red, Solid Silver, Solid Gold, Solid Gray, Solid Blue, Solid Green, Solid Purple, Solid Yellow) and 6 Semi-translucent Colors(Blue, Magenta, Green, Orange, Yellow, Natural). PETG is an excellent material which combines the advantages of other filaments. Odorless; Little shrinkage rate; hydrophobicity (Does not absorb water); Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; Good glossy finish; There are a lot of eSUN PETG clients and experience sharing since it was released in 2014. Ask ESUN/INTSERVO if you need help dial it in. PETG requires slower printing speed than other materials...
  • Filamento PLA de alta calidad imprecion 3D - glow Rainbow
    Precio:  $231,869.00
    Agregar al Carrito   Vista

    Filamento PLA de alta calidad imprecion 3D - glow Rainbow

    -Titulo Original : DO3D Glow In Dark Fast Color Change Rainbow PLA 3D Printing Filament, Tidy Winding 1.75mm PLA, Widely Fit For 3D Printer; 1KG 2.2LBS Cardboard 3D Printing Material, Glowing In Dark Multi Colored PLA-Fabricante : DO3D-Descripcion Original: Filamento PLA de alta calidad que brilla en el arco iris oscuro: cambia rápidamente de color multicolor arcoíris oscuro PLA, normalmente cambia de color alrededor de cada 5-10mt, brillará en verde oscuro, azul, morado, rojo, multicolor después de abosorber la luz UV alrededor de media hora. Todas nuestras materias primas son materias primas 100% nuevas, es un buen rendimiento de filamento, más detalles y fácil de imprimir, proporciona una excelente fluorescencia luminosa de piezas impresas; piezas de vacaciones, decoración, regalo para niños, etc ampliamente compatible: filamento pla de 1.75mm con tolerancia de alto diametro, diseño para adaptarse a la mayoria de impresoras 3d fdm/boligrafo de impresion 3d en el mercado, fabricado con linea de produccion sin obstrucciones para garantizar una experiencia de impresion suave y estable sugerencia de impresion: tolerancia de alto diametro de 1.5mm, diseño para adaptarse a la mayoria de las impresoras 3d fdm/pluma de impresion 3d en el mercado, facil de imprimir; sugiere temperatura de impresion: 210 ºc; sugiere cama termica: 30-60 ºc o no necesario; sugiere tamaño de boquilla de impresora: 0.016 in sin enredos y facil de imprimir: todo el filamento producido por el sistema de control servo, para garantizar el material pla con diametro de consistencia, 100% libre de enredos durante la produccion, sin burbujas, fuerte dureza, imprime mucho mas suavemente paquete: peso neto del filamento 1kg/carrete, 1kg/carrete, sellado al vacio en cada bolsa; tenemos los colores mas populares libres a su eleccion....
  • Filamento Policarbonato 2.85mm 1kg COLOR FOTO1 IMP 3D 0LAJNS
    Precio:  $195,419.00
    Agregar al Carrito   Vista

    Filamento Policarbonato 2.85mm 1kg COLOR FOTO1 IMP 3D 0LAJNS

    -Titulo Original : Gizmo Dorks 3mm (2.85mm) PC Polycarbonate Filament 1kg / 2.2lbs for 3D Printers, Blue-Fabricante : GIZMO DORKS-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento Biodegradable 1.75mm 1kg COLOR FOTO1 IMP 3D 7HFQDF
    Precio:  $183,359.00
    Agregar al Carrito   Vista

    Filamento Biodegradable 1.75mm 1kg COLOR FOTO1 IMP 3D 7HFQDF

    -Titulo Original : Monoprice PLA Plus+ Premium 3D Filament - Light Blue - 1kg Spool, 1.75mm Thick | Biodegradable | Same Strength As Standard ABS | For All PLA Compatible Printers-Fabricante : MONOPRICE-Descripcion Original: PLA Plus+ is a good choice for a printing material if you are looking for high accuracy and high resolution. // This 1.0kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. // It has a nominal processing temperature range of 205 ~ 225°C (401 ~ 437°F). // Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. // The negatives of using PLA Plus+ is that it is vulnerable to degradation from moisture, sunlight, and heat. // Color:  |  Size: Get outstanding 3D printing results when you use 1.75mm PLA Plus+ 3D Printer Filament from Monoprice! PLA Plus+ is a good choice for a printing material if you are looking for high accuracy and high resolution. It does not require a heated base and has a very low shrinkage rate (0.3%). PLA Plus+ is stronger than ordinary PLA, possessing the same strength as normal ABS material. This 1.0kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature range of 205 ~ 225°C (401 ~ 437°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA Plus+ is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot...
  • Filamento de impresion 3D OEM Mika3D PLA 1,75 mm 1 kg-Verde
    Precio:  $178,469.00
    Agregar al Carrito   Vista

    Filamento de impresion 3D OEM Mika3D PLA 1,75 mm 1 kg-Verde

    -Titulo Original : OEM MIKA3D Glow In Dark Green PLA 3D Printer Filament, 1.75mm Strong Luminous Glow In Dark Green 3D Printer PLA, Widely Fit For 3D Printer, 1KG 2.2lbs Glowing In Dark Fluorescent Green PLA-Fabricante : OEM MIKA3D-Descripcion Original: - Filamento PLA que brilla en la oscuridad: nuestro filamento PLA Sereise que brilla en la oscuridad brillará en la oscuridad después de absorber la luz ultravioleta. Tiene un color natural durante el día, mientras que tiene un increíble verde fluorescente en la oscuridad después de la exposición a la luz solar intensa o a la luz ultravioleta; Para obtener un efecto luminoso sorprendente, exponga el artículo impreso terminado a la luz solar directamente brillante o a la luz ultravioleta durante aproximadamente 20 a 30 minutos; Recomendar Fuentes de Luz: Luz UV, Luz Solar Directamente Fuerte. La luz solar directa funciona bastante bien - Alta calidad y gran compatibilidad: 1,75 mm de diámetro, control de alta calidad, utilizamos materia prima de primera calidad para mantener el efecto luminoso durante más tiempo; Para mantener un mejor efecto luminoso, se sugiere exponer el filamento a la luz del sol durante unos 30 minutos. Perfectamente compatible con la mayoría de las impresoras 3D FDM y bolígrafos 3D del mercado, se funde bien y se alimenta suavemente, sin burbujas, sin atascos, sin deformaciones, fácil de imprimir. - Puntas y configuración de impresión 100% libres de enredos: para nuestro filamento, utilizamos la máquina servo, para hacer todo lo posible para que la línea de filamento se enrolle lo más ordenadamente posible, además todos nuestros filamentos están 100% libres de enredos durante la producción. , Después de cada uso, por favor arregle el extremo del filamento, asegúrese de insertar el extremo libre del filamento en los orificios del carrete, para evitar que se enrede la próxima vez; Temperatura de impresión sugerida: 200*C-220*C - Amplia aplicación y paquete: nuestra serie PLA que brilla en la oscuridad, después de absorber la luz ultravioleta, tiene un fuerte efecto fluorescente ELBAZARDIGITAL en la oscuridad, es muy adecuado para imprimir regalos, decoraciones para fiestas, Acción de Gracias y Navidad, barras luminosas, pantallas de lámparas, etc. El peso neto del filamento del carrete es de 1 kg, envasado al vacío con secadores para mantenerlo seco y limpio. - Servicio postventa y garantía: para nuestra serie PLA que brilla en la oscuridad, es fácil de imprimir y usar. Si tiene alguna pregunta durante el uso, infórmenos en cualquier momento. Siempre estaremos aquí para ayudarlo. Tenemos alta confianza. de nuestro filamento PLA, por favor pruebe y pruebe, siempre estamos aquí para servirle mejor ¿Quieres un artículo de la serie que brilla en la oscuridad? ¿Imprimir los objetos 3D en colores que brillan en la oscuridad? Nuestro filamento PLA que brilla en la oscuridad lo satisface, nuestro filamento PLA de la serie que brilla en la oscuridad brillará en la oscuridad después de absorber la luz ultravioleta. Tiene un color natural durante el día, mientras que tiene un increíble color fluorescente en la oscuridad después de la exposición a la luz solar intensa o a la luz ultravioleta; Para obtener un efecto luminoso sorprendente, exponga el artículo impreso terminado a la luz solar directamente brillante o a la luz ultravioleta durante aproximadamente 20 a 30 minutos; Recomendar Fuentes de Luz: Luz UV, Luz Solar Directamente Fuerte. La luz solar directa funciona bastante bien, ¡apoya muy bien su innovación y diseño en el mundo de la impresión 3D! # Especificación: Material: Filamento PLA 3D verde oscuro (ácido poliláctico) Precisión del diámetro: 1,75 mm +/-0,05 mm Temperatura de impresión recomendada: 200-220 C) Velocidad de impresión recomendada: 30-60 mm/s; Cama térmica recomendada: 122-140 F (50 C-60 C) Cantidad: un carrete empaquetado en una caja, el peso neto del filamento del carrete es: 1 kg (2,2 libras) Filamento PLA luminoso que brilla en la oscuridad: para obtener un efecto luminoso sorprendente, exponga el acabado impreso Objeto a luz visible de onda corta ...
  • Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [0GU2H7MG]
    Precio:  $169,769.00
    Agregar al Carrito   Vista

    Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [0GU2H7MG]

    -Titulo Original : Gizmo Dorks 3mm (2.85mm) PLA Filament 1kg / 2.2lb for 3D Printers, Translucent Pink-Fabricante : GIZMO DORKS-Descripcion Original: 3mm diameter, 1kg net weight, PLA Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 200 - 210°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...
Mostrar del 1 al 24 (de 456 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
Destacados
Revisar todos destacados

Información

Información

Nuestras ofertas

Nuestras ofertas

Su cuenta

Su cuenta

Mantente conectado

Mantente conectado

Contáctenos

Contáctenos

elbazardigital.com   © 2024