Arriba

Inicio » Catalogo » Computación » Impresión > Impresión 3D > Filamentos

Impresión > Impresión 3D > Filamentos

Mostrar: 
Mostrar del 1 al 24 (de 488 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • filamento ABS 1.75mm polymaker 1kg negro
    Precio:  $171,919.00
    Agregar al Carrito   Vista

    filamento ABS 1.75mm polymaker 1kg negro

    -Titulo Original : Polymaker ABS Filament 1.75mm Black ABS, 1kg Heat Resistant ABS Cardboard Spool - PolyLite ABS 3D Filament 1.75mm Black Filament-Fabricante : Polymaker-Descripcion Original: Resistente al impacto y al calor - El filamento ABS PolyLite de 1,75 mm negro es un material muy duradero diseñado para reducir los atascos. Proporciona alta resistencia al calor (Temperatura de Ablandamiento Vicat: 104?C) y buenas propiedades mecánicas. PolyLite 3D print ABS Black es una buena opción para piezas funcionales que requieren durabilidad o resistencia a altas temperaturas Mayor estabilidad - El filamento ABS PolyLite 1.75 negro (filamento de acrilonitrilo butadieno estireno) está fabricado con una resina ABS especial polimerizada a granel, que tiene un contenido volátil significativamente menor en comparación con las resinas ABS tradicionales. Si necesita alguna característica resistente a los rayos UV, le recomendamos nuestro filamento ASA resistente a los rayos UV para sus requisitos al aire libre. Libre de humedad: nuestro filamento Polymaker Black ABS de 1,75 mm viene en una bolsa sellada al vacío y resellable con desecante, además de estar empacado en una caja sellada resistente, paquete de alta calidad sin preocupaciones para garantizar el mejor rendimiento de impresión de tu filamento Carrete de cartón - Viene en un empaque de versión 3.0 actualizado con carrete y caja de cartón totalmente reciclado Nota importante: pase el filamento por el orificio fijo para evitar enredos después del uso. El filamento ABS de 1,75 requiere una cama caliente y una superficie de impresión adecuada para evitar deformaciones. Las piezas grandes son propensas a deformarse en las impresoras domésticas y el olor cuando se imprime es más fuerte que con PLA. Usar raft o brim o reducir la velocidad para la primera capa podría ayudar a evitar la deformación Configuración de impresión - Boquilla: 245?C - 265?C; Cama: 90?C - 100?C; Velocidad: 30 mm/s - 50 mm/s; Superficie de la cama: BuildTak, lámina de PEI con lechada de ABS; Ventilador de refrigeración: BAJO para una mejor calidad de la superficie, APAGADO para una mejor resistencia color negro 1kg...
  • Filamento ABS 3.0mm 1kg COLOR FOTO-1 IMP 3D [1K87AIGK]
    Precio:  $157,759.00
    Agregar al Carrito   Vista

    Filamento ABS 3.0mm 1kg COLOR FOTO-1 IMP 3D [1K87AIGK]

    -Titulo Original : HATCHBOX ABS 3D Printer Filament, Dimensional Accuracy +/- 0.05 mm, 1 kg Spool, 3.00 mm, Glow in The Dark-Fabricante : HATCHBOX-Descripcion Original: 1 KG (approximately 2.20 lbs.) Spool // Welcome to HATCHBOX 3D Products Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 3.00mm diameter filament. Our filaments have a dimensional accuracy of +/- 0.05mm. ABS or Acrylonitrile Butadiene Styrene, is a tough and durable thermoplastic. It's ability to with stand higher temperatures, ABS is one of the most popular and commonly chosen material on the market. ABS can be used for full functional models, and is the closest material to real production models. The 3D printed object will have a glossy type finish. Why we love it: Prints at higher temperature, Tough and durable, Requires less manual finishing, Process in acetone for polished finish...
  • Filamento De Limpieza 1.75mm 1kg COLOR FOTO1 IMP 3D 746J454J
    Precio:  $93,019.00
    Agregar al Carrito   Vista

    Filamento De Limpieza 1.75mm 1kg COLOR FOTO1 IMP 3D 746J454J

    -Titulo Original : NovaMaker 3D Printer Cleaning Filament 1.75mm Natural, 0.1kg(0.22lb), Dimensional Accuracy +/- 0.05mm,-Fabricante : NOVAMAKER-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7TRPTYD7]
    Precio:  $180,229.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7TRPTYD7]

    -Titulo Original : Hello3D PLA 3D Printer Filament 1.75mm, Glow In The Dark Green OEM Filament, 3D Printing GID Filament 1KG (2.2Lbs) Spool Luminous Green-Fabricante : HELLO3...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [0T7N6FWS]
    Precio:  $169,769.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [0T7N6FWS]

    -Titulo Original : Gizmo Dorks 1.75 mm PLA Filament, 1 kg for 3D Printers, Opaque Pink-Fabricante : GIZMO DORKS-Descripcion Original: 1.75 mm diameter, 1 kg net weight // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Print Temperature: 220 - 225°C // Heated Platform Not Required //...
  • Filamento PLA de alta calidad imprecion 3D - Black to Red
    Precio:  $170,449.00
    Agregar al Carrito   Vista

    Filamento PLA de alta calidad imprecion 3D - Black to Red

    -Titulo Original : DO3D 3D Silk PLA Black To Red 2 Color Change 3D Printer Filament, Tidy Winding Silk 2 Color Gradient Transfer Multi Colored Silk PLA, 1.75mm 1KG 2.2LBS Cardboard Spool PLA, Silk PLA Black To Red-Fabricante : DO3D-Descripcion Original: filamento pla de transferencia de 2 colores brillantes de seda de alta calidad: cambia de color de un color a otro, 2 colores de seda cambiados, con filamento de varios colores en un carrete. todas nuestras materias primas son materias primas 100% nuevas, es un buen rendimiento de filamento, mas detalles y facil de imprimir, proporciona una excelente superficie brillante de seda de las piezas impresas; es perfecto para modelos 3d, piezas de vacaciones, decoracion, regalo para niños, etc ampliamente compatible: filamento pla de seda de 2 tipos de cambio de color de 0.069 in con alto diametro controlado, diseño para adaptarse a la mayoria de impresoras 3d fdm / boligrafo de impresion 3d en el mercado, fabricado con linea de produccion sin obstrucciones para garantizar una experiencia de impresion suave y estable sugerencia de impresion: diseño para adaptarse a la mayoria de impresoras 3d fdm/pluma de impresion 3d en el mercado, facil de imprimir; sin pulido de superficie, el articulo impreso acabado con superficie brillante de seda, temperatura de impresion sugerida: 210°c; sugiere cama de calor: 30-60°c o no necesario; sugiere tamaño de boquilla de impresora: 0.016 in sin enredos y facil de imprimir: todo el filamento producido por el sistema de control servo, para garantizar el material pla de seda con diametro de consistencia, 100% libre de enredos durante la produccion, por favor fije el extremo del filamento despues de cada uso, sin burbujas, fuerte dureza, imprima mucho mas suavemente paquete: peso neto del filamento 1kg/carrete, 1kg/carrete, sellado al vacio en cada bolsa; tenemos los colores mas populares libres a su eleccion. ...
  • Filamento Nylon 2.85mm 1kg COLOR FOTO-1 IMP 3D [0LAJNAUW]
    Precio:  $195,419.00
    Agregar al Carrito   Vista

    Filamento Nylon 2.85mm 1kg COLOR FOTO-1 IMP 3D [0LAJNAUW]

    -Titulo Original : Gizmo Dorks 3mm (2.85mm) Nylon Filament 1kg / 2.2lbs for 3D Printers, White-Fabricante : GIZMO DORKS-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 1.75mm 0.2kg COLOR FOTO-1 IMP 3D [7HR42Q6K]
    Precio:  $71,769.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 0.2kg COLOR FOTO-1 IMP 3D [7HR42Q6K]

    -Titulo Original : Gizmo Dorks Glitter PLA 3D Printer Filament 1.75mm 200g, Blue-Fabricante : GIZMO DORKS-Descripcion Original: Glitter PLA nozzle temperature range 195 - 225 C; filament diameter of 1.75 mm +/- .03 mm // Thermoplastic PLA is commonly used in 3D printing because of it's low melting temperature, odorless, and low warp // 200 gram net weight is the perfect sample size to try out filament // Gizmo Dorks PLA is specially formulated and engineered to prevent and reduce jamming // Spool dimensions are 6 inches by 1.5 inches with a 2.25 inch spindle diameter; the net weight of the filament is 200 grams // Size:  |  Color: Glitter PLA adds a new dimension or sparkle to your print. The PLA glitter colors add a glimmer or twinkle throughout the print creating a unique look. There is a physical speckle dispersed throughout the filament to make your prints stand out. Gizmo Dorks Glitter PLA filament works with a wide range of common 3D printers. PLA (Polylactic Acid) is one of the most commonly used 3D printer material and for good reason. The widely used thermoplastic has a low melting temperature while also being virtually warp free. Glitter PLA does not have an odor like ABS and does not require a heated bed. Getting failed prints because of filament jams is a painful aspect of 3D printing. However, Gizmo Dorks Glitter PLA is specifically engineered to reduce jamming.Glitter PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. Glitter PLA is a more earth friendly plastic. It is stronger and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. Glitter PLA enjoys sharper details and corners compared to ABS without the risk of cracking or warping. Glitter PLA can also be printed at higher throughput speeds.The 200 gram spool is a perfect sample size to test out and try the filament before committing to a 1 kg version...
  • Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [7GP31WY6]
    Precio:  $134,059.00
    Agregar al Carrito   Vista

    Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [7GP31WY6]

    -Titulo Original : Silk Copper PLA 3 mm (2.85 mm) 3D Printer Filament 1KG 2.2LBA Spool PLA Printing Material Silky Shiny Shine PLA Metal Metallic Red Copper CC3D-Fabricante : CC3D-Descripcion Original: All Product Categories > Industrial & Scientific > Additive Manufacturing Products > 3D Printing Supplies > 3D Printing Filament // Product description Color:Silk Copper Diameter : 2.85mm Net Weight: 1000g Recommended Printing Temp: 195 - 230 °C Recommended Printing Speed: 30 - 60 mm/s Heated Bed: Not required but can be used (up to 60 °C...
  • Filamentos para impresora 3D Pla de seda en 2 colores 6un
    Precio:  $237,719.00
    Agregar al Carrito   Vista

    Filamentos para impresora 3D Pla de seda en 2 colores 6un

    -Titulo Original : Mixed 6 Spools Fast 2 Color Change 3D Printer Filament Bundle, It Packed With 6 Beautiful Color Change Silk PLA Filament, Each Spool 250g, 6 Spools, Total 1.5kg Silk PLA Bundle By OEM MIKA3D-Fabricante : OEM MIKA3D-Descripcion Original: - 6 hermosos colores; Incluye 6 carretes, 2 filamentos PLA de seda que cambian de color: morado seda a verde seda, rosa seda a cian seda, rosa seda a verde seda, rojo seda a azul seda, azul seda a morado seda, rojo seda a oro seda; El total es 1,5 kg de PLA de seda 3D, estos colores son muy adecuados para imprimir hermosos objetos de impresión 3D multicolores y brillantes, es una excelente muestra y paquete de regalo para impresión 3D - 2 filamentos PLA con cambio de degradado de color de seda: son 2 tipos de cambio de color; Los 2 cambios de color que cambian de forma gradual harán que varios colores brillantes de seda se mezclen en un filamento de carrete; También este tipo de filamento con superficie sedosa y brillante; Dando un Toque Suave, Nacarado y Único; Obtendrá una hermosa superficie de impresión de varios colores, es perfecta para el campo de la impresión 3D, como bricolaje, industria, educación, etc. - Alta calidad y gran compatibilidad: 1,75 mm de diámetro, alta calidad controlada, utilizamos materia prima de primera calidad para mantener el filamento de alta calidad; Tiene poco olor, no tiene burbujas, se derrite bien, se alimenta suavemente, no se atasca, no se deforma y es fácil de imprimir - Gran compatibilidad: tolerancia de alto diámetro de 1,75 mm, para garantizar una alimentación constante y una impresión suave, es perfectamente compatible con la mayoría de las impresoras 3D FDM y bolígrafos 3D del mercado, como Creality Ender, ANYCUBIC, Flashforge, Monoprice, SCRIB3D, MYNT3D, etc. - Puntas y configuración de impresión 100% libres de enredos: para nuestro filamento, utilizamos la máquina servo, para hacer todo lo posible para que la línea de filamento se enrolle lo más ordenadamente posible, además todos nuestros filamentos están 100% libres de enredos durante la producción. , Después de cada uso, por favor arregle el extremo del filamento, asegúrese de insertar el extremo libre del filamento en los orificios del carrete, para evitar que se enrede la próxima vez; Temperatura de impresión sugerida: 205*C-220*C ...
  • Filamento ABS 1.75mm 1kg COLOR FOTO-1 IMP 3D [0T7N50OW]
    Precio:  $154,369.00
    Agregar al Carrito   Vista

    Filamento ABS 1.75mm 1kg COLOR FOTO-1 IMP 3D [0T7N50OW]

    -Titulo Original : Gizmo Dorks 1.75 mm ABS Filament, 1 kg for 3D Printers, Natural Beige-Fabricante : GIZMO DORKS-Descripcion Original: 1.75 mm diameter, 1 kg net weight // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Print Temperature: 230 - 240°C // Platform Temperature: 90 - 110°C //...
  • Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [728LNLX7]
    Precio:  $109,529.00
    Agregar al Carrito   Vista

    Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [728LNLX7]

    -Titulo Original : SAINSMART 1.75mm 250g Flexible TPU 3D Printing Filament, Dimensional Accuracy +/- 0.05 mm (Red)-Fabricante : SAINSMART-Descripcion Original: Approximately 250 grams, feet of filament on a spool with a case so it's not flopping all over the place. Splash Spools store easily in a desk drawer, stacked space or even hang on a wall. Be sure you are ordering the correct diameter for your printer. This product is only available in 1.75mm. // Specially formulated plastic with increased amount of flexibility, with rigid structure. Recommended for printing objects, which will be impacted more than normal ones. // SAINSMART filament is 100% TPU. TPU is essentially polyurethane, it belongs to the TPE class of thermoplastics. Recommended for printing objects, which will be impacted more than normal ones. // Flexible Filament does not feed well on all 3D printers. Please check your printer specifications before ordering. Only available in 1.75mm diameter. // It's better to work on direct drive extruders. Please print slowly and read the tips if you are bowden. // Color: SainSmart TPU filament is featured by its high strength and flexibility, like a hybrid of plastic and rubber. 95A TPU has high abrasion resistance and low compression compared to rubber parts, especially at higher infill. In comparison with most common filaments like PLA and ABS, TPU must be run much slower. - Material: Rep-Flex TPU - Vacuumed Sealed with desiccant - Shore Hardness: 95A - Weight: 250g Spool - Diameter: 1.75mm (+/- 0.05mm) - Recommended extruder temperature:195 - 230°C - Recommended platform temperature: 40 - 60°C Recommended for printers with direct drive extruder, 0.4~0.8mm Nozzles. With bowden extruder you might pay more attention to these tips: - Print slow 15-30 mm/s Printing speed - First layer settings. (Height 100% Width 150% speed 50% e.g.) - Retraction disabled. This would reduce messy, stringing or oozing printing result. - Increase Multiplier(Optional). set to 1.1 would help the filament bond well. - Cooling fan on after first layer. If you are having problems printing with soft filaments, firstly, and most importantly, slow the print down, run at 20mm/s will work perfectly. It is important when loading the filament to allow it to only just start extruding. Once you see the filament coming out the nozzle hit stop. The load feature pushes filament through quicker than a normal print and this can cause it to get caught in the extruder gear. Also feed the filament direct to the extruder, not through the feeder tube. This reduces the drag on the filament which can cause the gear to slip on the filament. I 1x SainSmart TPU Flexible Filament 1.75mm 250g(vacuum sealed...
  • Filamento Hatchbox para imprecion 3d 1.75mm 1kg - Gold
    Precio:  $185,339.00
    Agregar al Carrito   Vista

    Filamento Hatchbox para imprecion 3d 1.75mm 1kg - Gold

    -Titulo Original : HATCHBOX 1.75mm Gold PLA 3D Printer Filament, 1 KG Spool, Dimensional Accuracy /- 0.03 Mm, 3D Printing Filament-Fabricante : HATCHBOX-Descripcion Original: especificaciones del filamento: tamaño: carrete de 2.20 libras, diametro del filamento de 0.069 pulgadas (precision dimensional de /- 0.001 pulgadas). temperatura: temperatura recomendada de extrusion/boquilla de 356 °f - 410 °f. filamento de acido polilactico facil de usar: libera tu creatividad con nuestro filamento de pla sin complicaciones. diseñado para darte la mejor experiencia de impresion 3d, el filamento de acido polilactico de hatchbox se puede utilizar comodamente en varias impresoras convencionales. con una dureza y fluidez mejoradas, nuestro acido polilactico ofrece amplios rangos de temperatura y velocidad para adaptarse a todas tus necesidades innovadoras. apto para principiantes y expertos: los filamentos para impresora 3d hatchbox estan hechos en funcion de la calidad y la consistencia, por lo que les resulta facil a los usuarios novatos comenzar con ajustes basicos. quienes tengan experiencia en las impresiones pueden llevar sus diseños al limite sin preocuparse por problemas de pureza, tolerancia o impresion. filamentos de impresion 3d de alta calidad: sin obstrucciones, burbujas ni enredos. el acido polilactico de hatchbox esta formulado para ofrecer una deformacion minima y poco o ningun olor sin el uso de una base caliente. el acido polilactico esta sellado al vacio con desecante para evitar la absorcion de humedad, lo que permite una resolucion con un alto nivel de detalle....
  • Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [0ITZQE6C]
    Precio:  $169,769.00
    Agregar al Carrito   Vista

    Filamento PLA 2.85mm 1kg COLOR FOTO-1 IMP 3D [0ITZQE6C]

    -Titulo Original : Gizmo Dorks 3mm (2.85mm) PLA Filament 1kg / 2.2lb for 3D Printers, Fluorescent Yellow (UV Light)-Fabricante : GIZMO DORKS-Descripcion Original: 3mm diameter, 1kg net weight, PLA Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 200 - 210°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...
  • Filamento Pla 1.75mm 1kg Color Foto-1 Imp 3d [7sm48vx5]
    Precio:  $152,529.00
    Agregar al Carrito   Vista

    Filamento Pla 1.75mm 1kg Color Foto-1 Imp 3d [7sm48vx5]

    -Titulo Original : Hello3D Silk PLA Filament 1.75mm, OEM 3D Printer Filament Silk Filament, Silky Shiny Filament PLA For 3D Printers And Pens, 1KG (2.2Lbs) 1 Spool (Silk Gold)-Fabricante : HELLO3...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7QGV4TFY]
    Precio:  $159,709.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7QGV4TFY]

    -Titulo Original : PLA Filament 1.75mm Silk Black, Geeetech Silk 3D Printer Filament PLA 1.75mm for 3D Printer and 3D Pen, 1kg 1 Spool-Fabricante : GEEETECH-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [82WR3G2L]
    Precio:  $118,669.00
    Agregar al Carrito   Vista

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [82WR3G2L]

    -Titulo Original : Transparent Clear Black PETG Filament 1.75mm 1KG 3D Printer Filament 2.2lbs Spool 3D Printing Materials Fit Most FDM Printer-Fabricante : CC3D-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA de alta calidad para imprecion 3D - glow Blue
    Precio:  $161,839.00
    Agregar al Carrito   Vista

    Filamento PLA de alta calidad para imprecion 3D - glow Blue

    -Titulo Original : Do3d Glow In Dark Blue Pla 3d Printer Filament, Tidy Winding High Diameter Tolerance 1.75mm Pla, Widely Fit For 3d Printer; 1kg 2.2lbs Cardboard Spool 3d Printing Material, Glowing In Dark Blue Pla-Fabricante : Do3d-Descripcion Original: Filamento PLA de alta calidad que brilla en la oscuridad: brilla en azul oscuro, después de abosorber la luz UV alrededor de media hora. Todas nuestras materias primas son materias primas 100% nuevas, es un buen rendimiento de filamento, más detalles y fácil de imprimir, proporciona una excelente fluorescencia luminosa de piezas impresas; es perfecto para modelos 3D, piezas de vacaciones, decoración, regalo para niños, etc ampliamente compatible: filamento pla de 1.75mm con tolerancia de alto diametro, diseño para adaptarse a la mayoria de impresoras 3d fdm/boligrafo de impresion 3d en el mercado, fabricado con linea de produccion sin obstrucciones para garantizar una experiencia de impresion suave y estable sugerencia de impresion: tolerancia de alto diametro de 1.5mm, diseño para adaptarse a la mayoria de las impresoras 3d fdm/pluma de impresion 3d en el mercado, facil de imprimir; sugiere temperatura de impresion: 210 ºc; sugiere cama termica: 30-60 ºc o no necesario; sugiere tamaño de boquilla de impresora: 0.016 in sin enredos y facil de imprimir: todo el filamento producido por el sistema de control servo, para garantizar el material pla con diametro de consistencia, 100% libre de enredos durante la produccion, sin burbujas, fuerte dureza, imprime mucho mas suavemente paquete: peso neto del filamento 1kg/carrete, 1kg/carrete, sellado al vacio en cada bolsa; tenemos los colores mas populares libres a su eleccion....
  • Filamento ABS 1.75mm 1kg COLOR FOTO-1 IMP 3D [0F9MN70E]
    Precio:  $154,369.00
    Agregar al Carrito   Vista

    Filamento ABS 1.75mm 1kg COLOR FOTO-1 IMP 3D [0F9MN70E]

    -Titulo Original : Gizmo Dorks 1.75mm ABS Filament 1kg / 2.2lb for 3D Printers, Grey-Fabricante : GIZMO DORKS-Descripcion Original: 1.75mm diameter, 1kg net weight, ABS Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 230 - 240°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...
  • Filamento Biodegradable 1.75mm 1kg COLOR FOTO1 IMP 3D 7HFQDF
    Precio:  $181,769.00
    Agregar al Carrito   Vista

    Filamento Biodegradable 1.75mm 1kg COLOR FOTO1 IMP 3D 7HFQDF

    -Titulo Original : Monoprice PLA Plus+ Premium 3D Filament - Light Blue - 1kg Spool, 1.75mm Thick | Biodegradable | Same Strength As Standard ABS | For All PLA Compatible Printers-Fabricante : MONOPRICE-Descripcion Original: PLA Plus+ is a good choice for a printing material if you are looking for high accuracy and high resolution. // This 1.0kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. // It has a nominal processing temperature range of 205 ~ 225°C (401 ~ 437°F). // Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. // The negatives of using PLA Plus+ is that it is vulnerable to degradation from moisture, sunlight, and heat. // Color:  |  Size: Get outstanding 3D printing results when you use 1.75mm PLA Plus+ 3D Printer Filament from Monoprice! PLA Plus+ is a good choice for a printing material if you are looking for high accuracy and high resolution. It does not require a heated base and has a very low shrinkage rate (0.3%). PLA Plus+ is stronger than ordinary PLA, possessing the same strength as normal ABS material. This 1.0kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature range of 205 ~ 225°C (401 ~ 437°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament. The negatives of using PLA Plus+ is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7846LFNB]
    Precio:  $169,969.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7846LFNB]

    -Titulo Original : eSUN 1.75mm PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs), Fire Engine Red, (Pantone 199C)-Fabricante : ESUN-Descripcion Original: 1KG net (approximately 2.2 lbs) Filament with Clear Spool, Fire Engine Red, Pantone 199C // eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. // 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm); Fire Engine Red // Recommended Extrusion/Nozzle Temperature 205C - 225C. Most people print at 215 Celsius // Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5" // Color: Color: Fire Engine Red, Pantone 199C. We have several different mix of red filaments, please refer the pictures or pantone code and pick the one you prefer. Extrusion Temperature Range: 205 to 225 Superb layer bonding High rigidity. Good glossiness. Several times tougher than PLA Smoother finished printouts. No cracking or brittle problem. Prints are hard to break. PLA PRO(PLA+) print temperature is about 20 Celsius higher than regular PLA. Other settings are about the same. INTSERVO is dedicated to customer satisfaction. Customers are always welcome to contact us for any questions and/or support needs. We made this color based on customer requests. Your satisfaction is always our No.1 priority...
  • Filamentos para bolígrafos 3D PLA 1,75 mm total 73m-15un
    Precio:  $62,509.00
    Agregar al Carrito   Vista

    Filamentos para bolígrafos 3D PLA 1,75 mm total 73m-15un

    -Titulo Original : 3D Pen Filament Refills 15 Colors, 16 Ft Per Color Total 240 Ft, 1.75 Mm PLA Filament Compatible With SCRIB3D MYNT3D 3D Pen Comes With 2 Finger Caps & 3D Pen Template Book [3D Pen NOT Include]-Fabricante : YEETIN-Descripcion Original: -...
  • Filamento ABS 3.0mm 1kg COLOR FOTO-1 IMP 3D [1F5YEGGO]
    Precio:  $159,709.00
    Expira: 04/11/2021
    Agregar al Carrito   Vista

    Filamento ABS 3.0mm 1kg COLOR FOTO-1 IMP 3D [1F5YEGGO]

    -Titulo Original : HATCHBOX ABS 3D Printer Filament, Dimensional Accuracy +/- 0.05 mm, 1 kg Spool, 3.00 mm, Pink-Fabricante : HATCHBOX-Descripcion Original: 1 KG (approximately 2.20 lbs.) Spool // Welcome to HATCHBOX 3D Products Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 3.00mm diameter filament. Our filaments have a dimensional accuracy of +/- 0.05mm. ABS or Acrylonitrile Butadiene Styrene, is a tough and durable thermoplastic. It's ability to with stand higher temperatures, ABS is one of the most popular and commonly chosen material on the market. ABS can be used for full functional models, and is the closest material to real production models. The 3D printed object will have a glossy type finish. Why we love it: Prints at higher temperature, Tough and durable, Requires less manual finishing, Process in acetone for polished finish...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [6XBNXSZR]
    Precio:  $159,659.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [6XBNXSZR]

    -Titulo Original : WYZworks PLA 1.75mm [ Pink ] Premium Thermoplastic Polylactic Acid 3D Printer Filament - Dimensional Accuracy +/- 0.05mm 1kg / 2.2lb + [ Multiple Color Options Available ]-Fabricante : WYZWORKS-Descripcion Original: THERMOPLASTIC POLYLACTIC ACID [MSDS APPROVED] - With our ultra smooth technology, our filaments are capable to extrude beautifully and smoothly that help to build a more delicate object. Natural PLA Premium Quality MSDS Approved 3D Printer Filament. // HIGH SPECS - PLA [Polylactic Acid] 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) 1 KG (2.20 lbs) Spool 3D Printer Filament Vacuumed Sealed. Quality Black Filament With The Highest Dimensional Accuracy Means The Nozzle Won't Get Blocked. Don't Risk Damaging Your Expensive 3D Printer With Unvetted Filaments. // TEMPERATURE RECOMMENDATION - Recommended Printing Temperature range 170°C - 230°C - PLA allows higher print speed, more accurate placement of material with proper cooling (it does not shrink as much) and also thinner build heights because of less resistance from the plastic coming out the nozzle, where abs even at high temps (252C) is still sticky and has high viscosity. // CUSTOMER SUPPORT - Get The Absolute Best Filament & Support At Half The Cost Of Main Brand Filaments. Save Money Without Risking Your Equipment, Print Quality, & Time! // HIGH COMPATIBLE - For most common 3D printers such as ROBO 3D, Cubify, Leapfrog, MakerBot, Reprap, Afinia, UP, Mendel, flashforge, Solidoodle 2, Printrbot LC, MakerGear M2, Felix, Reprap, Ultimaker and any other 3D printers. //...
Mostrar del 1 al 24 (de 488 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
Destacados
Revisar todos destacados

Información

Información

Nuestras ofertas

Nuestras ofertas

Su cuenta

Su cuenta

Mantente conectado

Mantente conectado

Contáctenos

Contáctenos

elbazardigital.com   © 2024