Arriba

Inicio » Catalogo » Computación » Impresión > Impresión 3D > Filamentos

Impresión > Impresión 3D > Filamentos

Mostrar: 
Mostrar del 1 al 24 (de 472 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • filamento ABS 1.75mm polymaker 1kg negro
    Precio:  $154,739.00
    Agregar al Carrito   Vista

    filamento ABS 1.75mm polymaker 1kg negro

    -Titulo Original : Polymaker ABS Filament 1.75mm Black ABS, 1kg Heat Resistant ABS Cardboard Spool - PolyLite ABS 3D Filament 1.75mm Black Filament-Fabricante : Polymaker-Descripcion Original: Resistente al impacto y al calor - El filamento ABS PolyLite de 1,75 mm negro es un material muy duradero diseñado para reducir los atascos. Proporciona alta resistencia al calor (Temperatura de Ablandamiento Vicat: 104?C) y buenas propiedades mecánicas. PolyLite 3D print ABS Black es una buena opción para piezas funcionales que requieren durabilidad o resistencia a altas temperaturas Mayor estabilidad - El filamento ABS PolyLite 1.75 negro (filamento de acrilonitrilo butadieno estireno) está fabricado con una resina ABS especial polimerizada a granel, que tiene un contenido volátil significativamente menor en comparación con las resinas ABS tradicionales. Si necesita alguna característica resistente a los rayos UV, le recomendamos nuestro filamento ASA resistente a los rayos UV para sus requisitos al aire libre. Libre de humedad: nuestro filamento Polymaker Black ABS de 1,75 mm viene en una bolsa sellada al vacío y resellable con desecante, además de estar empacado en una caja sellada resistente, paquete de alta calidad sin preocupaciones para garantizar el mejor rendimiento de impresión de tu filamento Carrete de cartón - Viene en un empaque de versión 3.0 actualizado con carrete y caja de cartón totalmente reciclado Nota importante: pase el filamento por el orificio fijo para evitar enredos después del uso. El filamento ABS de 1,75 requiere una cama caliente y una superficie de impresión adecuada para evitar deformaciones. Las piezas grandes son propensas a deformarse en las impresoras domésticas y el olor cuando se imprime es más fuerte que con PLA. Usar raft o brim o reducir la velocidad para la primera capa podría ayudar a evitar la deformación Configuración de impresión - Boquilla: 245?C - 265?C; Cama: 90?C - 100?C; Velocidad: 30 mm/s - 50 mm/s; Superficie de la cama: BuildTak, lámina de PEI con lechada de ABS; Ventilador de refrigeración: BAJO para una mejor calidad de la superficie, APAGADO para una mejor resistencia color negro 1kg...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [0FG7BJLG]
    Precio:  $162,019.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [0FG7BJLG]

    -Titulo Original : Gizmo Dorks 1.75mm PLA Filament 1kg / 2.2lb for 3D Printers, Glow in The Dark-Fabricante : GIZMO DORKS-Descripcion Original: 1.75mm diameter, 1kg net weight, PLA Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 200 - 210°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...
  • Filamento Carbono 1.75mm 0.25kg Color Foto1 Imp 3d 7z388qxf
    Precio:  $961,999.00
    Agregar al Carrito   Vista

    Filamento Carbono 1.75mm 0.25kg Color Foto1 Imp 3d 7z388qxf

    -Titulo Original : CARBONX Carbon Fiber PEEK 3D Printing Filament, 1.75mm, 250G-Fabricante : 3DX-Descripcion Original: 250 Gram Spool // 1.75mm Filament Diameter // Carbon Fiber PEEK // Extruder Temps: 380 - 410°C // Bed Temps: 130 - 150°C // Size: CarbonX CF-PEEK is one of the premier polymers in FFF/FDM 3D Printing. Made using high-modulus carbon fiber for exceptional stiffness, strength, and dimensional stability. CarbonX PEEK Properties Include: High Thermal Resistance Excellent Chemical Resistance Superior Wear Resistance Near Zero Moisture Absorption Low smoke and toxic gas emissions PEEK has an excellent resistance to hydrolysis in boiling water and superheated steam (sterilization/autoclave) at temperatures in excess of 250°C (482°F). General thermal properties of PEEK are: Glass Transition Temperature (Tg) 143°C Melt Temperature (Tm) 343°C Continuous Use Temperature (CUT) 240 - 260°C CarbonX CF-PEEK is carbon fiber reinforced and abrasive - resulting in high wear on a brass nozzles. Printing with CarbonX PEEK PEEK has a melt temperature (Tm) of 343°C, therefore, you will need an all-metal extruder capable of reaching (and holding) temps upwards of 400°C or more depending on your specific printer. Every printer / slicer is different and you will need to tinker a bit to find a process that works for you. One of the more difficult aspects of printing with PEEK was getting it to stick to the build plate. The best material we found was Ultem PEI sheet or tape. Print recommendations: Extruder Temps: 380 - 410°C Bed Temps: 130 - 150°C Bed Prep: Ultem PEI tape or sheet Nozzle: We strongly recommend a 0.4mm orifice or larger using one of our A2 Hardened Nozzles Layer Height: Ideal layer height is 60% of nozzle diameter. We do not recommend printing layers below 0.25mm with carbon fiber grades. Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament. Please note - PEEK has a tendency to stick to metal (PEEK loves metal). Please make sure to purge out your extruder before it cools down or you run the risk permanent clogs. Seriously - we know this first hand...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7V6GJ62W]
    Precio:  $143,739.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7V6GJ62W]

    -Titulo Original : Silk Purple PLA Satin Shiny 3D Printer Filament, 1.75mm Diameter 1kg Spool 2.2lbs Widely Support FDM 3D Printers, with Extra One Bag Filament Sample Gift DO3D-Fabricante : DO3D-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento Metal 1.75mm 0.2kg COLOR FOTO-1 IMP 3D [74W463LH]
    Precio:  $59,979.00
    Agregar al Carrito   Vista

    Filamento Metal 1.75mm 0.2kg COLOR FOTO-1 IMP 3D [74W463LH]

    -Titulo Original : Gizmo Dorks Metal Bronze Fill Filament for 3D Printers 1.75mm 200g-Fabricante : GIZMO DORKS-Descripcion Original: Metal Bronze (Bronzefill with PLA base) 3D printer filament vacuumed sealed with desiccant // Extrusion nozzle temperature: 190 - 225 C // 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" // Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, and many more. // metal bronze fill filament is a unique filament blend that allows distinct prints with a metallic look and finish. Metal bronze filament is a special mix made by combining real bronze powder with PLA filament, and the filament prints very similar to normal PLA. Bronze filled filament imparts the look and feel of bronze giving the printed part a sculpted bronze finish look. The finished part will look laser sintered. The filament can be printed on either heated or non heated build plates. The suggested build surface to print on is blue painters tape, and there is essentially no warping. If a heated build plate is used, then please set it to 60 C, and the print will have an increased adhesion to the platform. Metal bronze fill filament can also be printed on regular glass, glass with glue stick, or kapton tape.Extrusion Temperature: 190 - 225 CHeated Bed: Not required but recommended at 60 CDiameter: 1.75mmDiameter Range: +/- 0.03mmNet Weight: 200 gramsGizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool...
  • Filamento PLA de alta calidad imprecion 3D - White to Red
    Precio:  $179,589.00
    Agregar al Carrito   Vista

    Filamento PLA de alta calidad imprecion 3D - White to Red

    -Titulo Original : DO3D 3D Printer Filament Silk PLA White To Red 2 Color Change, Tidy Winding Silk 2 Color Gradient Transfer Multi Colored Silk PLA, 1.75mm 1KG 2.2LBS Cardboard Spool PLA, Silk PLA White To Red-Fabricante : DO3D-Descripcion Original: filamento pla de transferencia de 2 colores brillantes de seda de alta calidad: cambia de color de un color a otro, 2 colores de seda cambiados, con filamento de varios colores en un carrete. todas nuestras materias primas son materias primas 100% nuevas, es un buen rendimiento de filamento, mas detalles y facil de imprimir, proporciona una excelente superficie brillante de seda de las piezas impresas; es perfecto para modelos 3d, piezas de vacaciones, decoracion, regalo para niños, etc ampliamente compatible: filamento pla de seda de 2 tipos de cambio de color de 0.069 in con alto diametro controlado, diseño para adaptarse a la mayoria de impresoras 3d fdm / boligrafo de impresion 3d en el mercado, fabricado con linea de produccion sin obstrucciones para garantizar una experiencia de impresion suave y estable sugerencia de impresion: diseño para adaptarse a la mayoria de impresoras 3d fdm/pluma de impresion 3d en el mercado, facil de imprimir; sin pulido de superficie, el articulo impreso acabado con superficie brillante de seda, temperatura de impresion sugerida: 210°c; sugiere cama de calor: 30-60°c o no necesario; sugiere tamaño de boquilla de impresora: 0.016 in sin enredos y facil de imprimir: todo el filamento producido por el sistema de control servo, para garantizar el material pla de seda con diametro de consistencia, 100% libre de enredos durante la produccion, por favor fije el extremo del filamento despues de cada uso, sin burbujas, fuerte dureza, imprima mucho mas suavemente paquete: peso neto del filamento 1kg/carrete, 1kg/carrete, sellado al vacio en cada bolsa; tenemos los colores mas populares libres a su eleccion. ...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7ZPLN87K]
    Precio:  $111,419.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7ZPLN87K]

    -Titulo Original : PLA MAX Yellow PLA Filament 1.75mm 3D Printer Filament PLA PRO (PLA+) PLA Plus 1KG 2.2LBS Spool Printing Materials Strength Than Noamal PLA Filament-Fabricante : CC3D-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7L5276NS]
    Precio:  $139,069.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7L5276NS]

    -Titulo Original : WYZworks PLA 1.75mm [ Silk Silver ] Premium Thermoplastic Polylactic Acid 3D Printer Filament - Dimensional Accuracy +/- 0.05mm 1kg / 2.2lb + [ Multiple Color Options Available ]-Fabricante : WYZWORKS-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 1.75mm 0.2kg COLOR FOTO-1 IMP 3D [74W2TNKB]
    Precio:  $129,239.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 0.2kg COLOR FOTO-1 IMP 3D [74W2TNKB]

    -Titulo Original : Gizmo Dorks PLA Filament for 3D Printers 1.75mm 200g, 4 Color Pack - Black, Grey, Transparent, White-Fabricante : GIZMO DORKS-Descripcion Original: PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant // Recommended Nozzle Temperature: 190 - 225 C; Filament diameter - 1.75mm // Net weight: 200 grams / Spool Diameter: 6" / Spool Width: 1.5" / Spool Hub Diameter: 2.25" // PLA filament is compatible with various 3D printers such as the Monoprice Maker Select, Lulzbot, Flash Forge, and many more // Color pack contains 4 spools, each spool contains 200g of filament. Colors: Black, Grey, Transparent, White //...
  • Filamento de impresoras 3D bolígrafos 3D de 1.75mm-Plateado
    Precio:  $136,389.00
    Agregar al Carrito   Vista

    Filamento de impresoras 3D bolígrafos 3D de 1.75mm-Plateado

    -Titulo Original : OEM MIKA3D Silk Metalic Shiny Silver PLA 1.75mm 3D Printer Filament, Widely Support For Most 3D Printing Printer, 2.2lbs 1KG Silk PLA 3D Printing Material-Fabricante : OEM MIKA3D-Descripcion Original: - filamento pla con superficie brillante de seda: todos nuestros filamentos pla con brillo de seda le ayudaran a obtener una superficie brillante y gloriosa sin pulir. hay mas de 10 colores populares de brillo brillante de seda gratuitos a su eleccion, estos colores son muy adecuados para imprimir. los hermosos articulos de superficie con brillo de seda brillante brindan un excelente acabado superficial de las piezas impresas; es una superficie brillante con brillo sedoso, que brinda un toque suave, nacarado y unico. - filamento pla con brillo de seda de alta calidad: todo nuestro pla de seda esta hecho con nueva materia prima 100% ecologica y tiene poco olor, no tiene burbujas, se derrite bien, se alimenta suavemente, no se atasca, no se deforma, es facil de imprimir y es perfecto. para el campo de la impresion 3d, como bricolaje, industria, educacion, etc. - 10 colores brillantes de seda disponibles y gran compatibilidad: tenemos 10 hermosos colores brillantes de seda gratis a su eleccion; tolerancia de alto diametro de 1,75 mm, para garantizar una alimentacion constante y una impresion suave, es perfectamente compatible con la mayoria de las impresoras 3d fdm y boligrafos 3d del mercado, como creality ender, anycubic, flashforge, monoprice, scrib3d, mynt3d, etc. - consejos y configuracion de impresion 100% libres de enredos: todos nuestros filamentos estan 100% libres de enredos antes de abrir el paquete. por favor, arregle el extremo del filamento despues de cada impresion, asegurese de insertar el extremo libre del filamento en los orificios del carrete para evitarlo. estar enredado para usarlo la proxima vez; para mejorar la calidad de impresion, utilice una nueva boquilla de impresora 3d de mas de 0,4 mm - paquete y garantia: para cada carrete de filamento, se empaqueta con un buen paquete al vacio, cada carrete de filamento pesa neto: 1 kg. si tiene alguna pregunta, por favor informenos en cualquier momento, siempre estaremos aqui para ayudarlo, para brindarle el mejor soporte: haremos nuestro mejor esfuerzo para ayudarlo a obtener un excelente articulo impreso. ¿quiere comenzar a imprimir en 3d para imprimir el articulo con una superficie brillante como la seda? ¿para crear los elementos que necesitaba? nuestra tienda lanza toda la serie de filamentos de impresion 3d silk pla, que incluyen mas de 10 hermosos colores brillantes de seda, ¡respalda muy bien su innovacion y diseño en el mundo de la impresion 3d! # especificacion: material: filamento pla 3d brillante de seda (acido polilactico) precision del diametro: 1,75 mm /-0,05 mm temperatura de impresion recomendada: 401-446 f (205-230 c) velocidad de impresion recomendada: 30-60 mm/s; cama termica recomendada: 122-140 f(50 c-60 c) cantidad: un carrete empacado en una caja, el peso neto del filamento del carrete es: 1 kg (2,2 lb) paquete: cada carrete empacado en una bolsa sellada al vacio, luego en una caja de color *extra regalo: una bolsa de muestra de color de filamento pla, se empaqueta junto con esta caja. estamos seguros de la calidad de nuestro filamento pla, contactenos si tiene algun problema con el articulo, dentro de las 24 horas de respuesta, ¡siempre estaremos aqui para servirle! ¡para crear arte 3d y comenzar su impresion 3d ahora! consejos: 1. es mejor usar una boquilla de 0,4 mm o 0,5 mm con filamento mika3d 2. empaque el filamento en una bolsa o caja sellada despues de su uso 3. todos nuestros filamentos estan 100% libres de enredos antes de abrir el paquete, para evitar problemas de enredos , inserte el extremo libre del filamento en los orificios del carrete despues de cada impresion...
  • Filamento Policarbonato 1.75mm 0.2kg COLOR FOTO1 IMP 3D 74W2
    Precio:  $64,599.00
    Agregar al Carrito   Vista

    Filamento Policarbonato 1.75mm 0.2kg COLOR FOTO1 IMP 3D 74W2

    -Titulo Original : Gizmo Dorks Polycarbonate Filament for 3D Printers 1.75mm 200g, Black-Fabricante : GIZMO DORKS-Descripcion Original: Polycarbonate 3D printer filament vacuumed sealed with desiccant is tough, strong filament that has high heat resistance // Extrusion nozzle temperature: 255 - 300 C // 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" // Printed parts made with Gizmo Dorks Polycarbonate filament have increased mechanical strength compared to ABS and PLA // The Gizmo Dorks Polycarbonate filament, also known as PC filament, is an incredibly strong thermoplastic material used in 3D printing. It is a good electrical insulator while having heat-resistant properties. Polycarbonate is used in a whole host of applications such as data storage, phones, eye protection, bullet-proof glass, and more. Polycarbonate has a high temperature resistance for a thermoplastic, and it does not shatter like plexiglass. It tends to bend and deform similar to hard rubber until it eventually breaks. It also has high optical clarity.PC absorbs a lot of moisture in the air. It is a hygroscopic material, and it is best to store in an airtight container when not in use. Even during use the material can become unprintable within a 24 hour print if in a humid environment. Therefore, keeping in an airtight container during printing as well is ideal. Dry filament will print more clear. Filament that has absorbed moisture will print white as well as pop and bubble during the print.Extruding temperature is generally around 260 C, depending on the printer. PC slowly softens when heated, unlike PLA which has a high transition temperature. Slower print speeds are preferred as an increase in temperature is required for faster prints. Polyimide tape (Kapton) should be used on a heated bed, ~120 C. Some users prefer applying glue or superglue on a glass bed and then heating to ~120 C-130 C. Please do not inhale any fumes. Heated up superglue can release toxic fumes, so only use in a well ventilated area.Extrusion Temperature: 255 - 300 CHeated Bed: 100 - 120 CDiameter: 1.75mm +/- 0.03mmColors: Black, Blue, or TransparentNet Weight: 200 gramsGizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to sample the filament quality and color before committing to a larger 1 kilogram spool...
  • Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [728LNLX7]
    Precio:  $98,569.00
    Agregar al Carrito   Vista

    Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [728LNLX7]

    -Titulo Original : SAINSMART 1.75mm 250g Flexible TPU 3D Printing Filament, Dimensional Accuracy +/- 0.05 mm (Red)-Fabricante : SAINSMART-Descripcion Original: Approximately 250 grams, feet of filament on a spool with a case so it's not flopping all over the place. Splash Spools store easily in a desk drawer, stacked space or even hang on a wall. Be sure you are ordering the correct diameter for your printer. This product is only available in 1.75mm. // Specially formulated plastic with increased amount of flexibility, with rigid structure. Recommended for printing objects, which will be impacted more than normal ones. // SAINSMART filament is 100% TPU. TPU is essentially polyurethane, it belongs to the TPE class of thermoplastics. Recommended for printing objects, which will be impacted more than normal ones. // Flexible Filament does not feed well on all 3D printers. Please check your printer specifications before ordering. Only available in 1.75mm diameter. // It's better to work on direct drive extruders. Please print slowly and read the tips if you are bowden. // Color: SainSmart TPU filament is featured by its high strength and flexibility, like a hybrid of plastic and rubber. 95A TPU has high abrasion resistance and low compression compared to rubber parts, especially at higher infill. In comparison with most common filaments like PLA and ABS, TPU must be run much slower. - Material: Rep-Flex TPU - Vacuumed Sealed with desiccant - Shore Hardness: 95A - Weight: 250g Spool - Diameter: 1.75mm (+/- 0.05mm) - Recommended extruder temperature:195 - 230°C - Recommended platform temperature: 40 - 60°C Recommended for printers with direct drive extruder, 0.4~0.8mm Nozzles. With bowden extruder you might pay more attention to these tips: - Print slow 15-30 mm/s Printing speed - First layer settings. (Height 100% Width 150% speed 50% e.g.) - Retraction disabled. This would reduce messy, stringing or oozing printing result. - Increase Multiplier(Optional). set to 1.1 would help the filament bond well. - Cooling fan on after first layer. If you are having problems printing with soft filaments, firstly, and most importantly, slow the print down, run at 20mm/s will work perfectly. It is important when loading the filament to allow it to only just start extruding. Once you see the filament coming out the nozzle hit stop. The load feature pushes filament through quicker than a normal print and this can cause it to get caught in the extruder gear. Also feed the filament direct to the extruder, not through the feeder tube. This reduces the drag on the filament which can cause the gear to slip on the filament. I 1x SainSmart TPU Flexible Filament 1.75mm 250g(vacuum sealed...
  • Filamento Hatchbox para imprecion 3d 1.75mm 1kg - Orange
    Precio:  $166,809.00
    Agregar al Carrito   Vista

    Filamento Hatchbox para imprecion 3d 1.75mm 1kg - Orange

    -Titulo Original : HATCHBOX 1.75mm Orange PLA 3D Printer Filament, 1 KG Spool, Dimensional Accuracy /- 0.03 Mm, 3D Printing Filament-Fabricante : HATCHBOX-Descripcion Original: especificaciones del filamento: tamaño: carrete de 2.20 libras, diametro del filamento de 0.069 pulgadas (precision dimensional de /- 0.001 pulgadas). temperatura: temperatura recomendada de extrusion/boquilla de 356 °f - 410 °f. filamento de acido polilactico facil de usar: libera tu creatividad con nuestro filamento de pla sin complicaciones. diseñado para darte la mejor experiencia de impresion 3d, el filamento de acido polilactico de hatchbox se puede utilizar comodamente en varias impresoras convencionales. con una dureza y fluidez mejoradas, nuestro acido polilactico ofrece amplios rangos de temperatura y velocidad para adaptarse a todas tus necesidades innovadoras. apto para principiantes y expertos: los filamentos para impresora 3d hatchbox estan hechos en funcion de la calidad y la consistencia, por lo que les resulta facil a los usuarios novatos comenzar con ajustes basicos. quienes tengan experiencia en las impresiones pueden llevar sus diseños al limite sin preocuparse por problemas de pureza, tolerancia o impresion. filamentos de impresion 3d de alta calidad: sin obstrucciones, burbujas ni enredos. el acido polilactico de hatchbox esta formulado para ofrecer una deformacion minima y poco o ningun olor sin el uso de una base caliente. el acido polilactico esta sellado al vacio con desecante para evitar la absorcion de humedad, lo que permite una resolucion con un alto nivel de detalle....
  • Filamento ABS 2.85mm 1kg COLOR FOTO-1 IMP 3D [0ITZQ7BO]
    Precio:  $138,939.00
    Agregar al Carrito   Vista

    Filamento ABS 2.85mm 1kg COLOR FOTO-1 IMP 3D [0ITZQ7BO]

    -Titulo Original : Gizmo Dorks 3mm (2.85mm) ABS Filament 1kg / 2.2lb for 3D Printers, Fluorescent Orange (UV Light)-Fabricante : GIZMO DORKS-Descripcion Original: 3mm diameter, 1kg net weight, ABS Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 230 - 240°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7C7T5D78]
    Precio:  $134,509.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7C7T5D78]

    -Titulo Original : PLA Filament 1.75mm, Geeetech 3D Printer PLA Filament,1.75mm,1kg per Spool,Grey-Fabricante : GEEETECH-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7S37SW72]
    Precio:  $129,889.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [7S37SW72]

    -Titulo Original : TTYT3D Silk Shine Purple 3D Printer PLA Filament, 1.75mm 3D Printing Material Widely Compatible, 1KG 2.2LBS Spool, with Extra Gift 10pcs FDM 3D Printer Nozzle Cleaning Needles-Fabricante : TTYT3D-Descripcion Original: Beautiful Shiny Purple Color: The Finished 3D Printed Item with Silk Glossy Smooth Appearance, Perfect for Arts, Crafts, DIY, Many Different 3D Print Projects // Premium Quality, Easy to Print: Widely Compatibility for FDM 3D Printers, 1.75mm High Diameter Tolerance, No Edge Warping, Consistent Feeding, Stable Print, No clogging, Eco-friendly, Ideal for Indoor Printing. // Printing Tips: Recommend Heat Bed 50-60°C, Recommend Printing Temperature: 220°C, To Avoid being Tangled, Insert Filament into Spool Holes to Fix after Every Time Use // Extra Gift & Package: Together With Small Gift 10pcs 0.4mm 3D Printer Nozzle Cleaning Needles,Vacuum Package with Zipper Bag, Net Weight 1KG/Spool // 100% Satisfy Warranty: Within 24 Hours Reply,100% Satisfaction Guarantee, If You're not Completely Satisfied for Any Reason, Contact us and We'll Help You to Sent it Back and Refunded //...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [82WR3G2L]
    Precio:  $106,809.00
    Agregar al Carrito   Vista

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [82WR3G2L]

    -Titulo Original : Transparent Clear Black PETG Filament 1.75mm 1KG 3D Printer Filament 2.2lbs Spool 3D Printing Materials Fit Most FDM Printer-Fabricante : CC3D-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...
  • Filamento PLA de alta calidad imprecion 3D - Purple to Blue
    Precio:  $179,589.00
    Agregar al Carrito   Vista

    Filamento PLA de alta calidad imprecion 3D - Purple to Blue

    -Titulo Original : DO3D Silk Purple To Sapphire Blue PLA 2 Color Change 3D Printer Filament, Tidy Winding Silk PLA 2 Color Gradient Transfer Multi Colored, 1.75mm 1KG Cardboard Spool PLA, Silk PLA Purple To Blue-Fabricante : DO3D-Descripcion Original: filamento pla de transferencia de 2 colores brillantes de seda de alta calidad: cambia de color de un color a otro, 2 colores de seda cambiados, con filamento de varios colores en un carrete. todas nuestras materias primas son materias primas 100% nuevas, es un buen rendimiento de filamento, mas detalles y facil de imprimir, proporciona una excelente superficie brillante de seda de las piezas impresas; es perfecto para modelos 3d, piezas de vacaciones, decoracion, regalo para niños, etc ampliamente compatible: filamento pla de seda de 2 tipos de cambio de color de 0.069 in con alto diametro controlado, diseño para adaptarse a la mayoria de impresoras 3d fdm / boligrafo de impresion 3d en el mercado, fabricado con linea de produccion sin obstrucciones para garantizar una experiencia de impresion suave y estable sugerencia de impresion: diseño para adaptarse a la mayoria de impresoras 3d fdm/pluma de impresion 3d en el mercado, facil de imprimir; sin pulido de superficie, el articulo impreso acabado con superficie brillante de seda, temperatura de impresion sugerida: 210°c; sugiere cama de calor: 30-60°c o no necesario; sugiere tamaño de boquilla de impresora: 0.016 in sin enredos y facil de imprimir: todo el filamento producido por el sistema de control servo, para garantizar el material pla de seda con diametro de consistencia, 100% libre de enredos durante la produccion, por favor fije el extremo del filamento despues de cada uso, sin burbujas, fuerte dureza, imprima mucho mas suavemente paquete: peso neto del filamento 1kg/carrete, 1kg/carrete, sellado al vacio en cada bolsa; tenemos los colores mas populares libres a su eleccion. ...
  • Filamento ABS 1.75mm 1kg COLOR FOTO-1 IMP 3D [0F9MN70E]
    Precio:  $138,939.00
    Agregar al Carrito   Vista

    Filamento ABS 1.75mm 1kg COLOR FOTO-1 IMP 3D [0F9MN70E]

    -Titulo Original : Gizmo Dorks 1.75mm ABS Filament 1kg / 2.2lb for 3D Printers, Grey-Fabricante : GIZMO DORKS-Descripcion Original: 1.75mm diameter, 1kg net weight, ABS Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 230 - 240°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...
  • Filamento ABS 2.85mm 1kg COLOR FOTO-1 IMP 3D [7HR2BSHL]
    Precio:  $143,549.00
    Agregar al Carrito   Vista

    Filamento ABS 2.85mm 1kg COLOR FOTO-1 IMP 3D [7HR2BSHL]

    -Titulo Original : Gizmo Dorks Low Odor ABS 3D Printer Filament 3mm (2.85mm) 1kg, Red-Fabricante : GIZMO DORKS-Descripcion Original: Uniquely formulated to be virtually smell free while 3D printing // Low odor ABS prints are high in strength and durability while providing for maximum impact resistance. // 200 gram net weight is the perfect sample size to try out filament // Nozzle temperature range 225 - 250 C; filament diameter of 2.85 mm +/- .03 mm // Spool dimensions are 195 mm x 63 mm with a 55 mm spindle diameter; the net weight of the filament is 1 kg which is 2.2 pounds // Size:  |  Color: Gizmo Dorks is now pleased to introduce low odor ABS that eliminates the nasty foul smell emitted during 3D printing. For all of the great mechanical characteristics of ABS, it is known to give off a pungent smell during extrusion. Low odor ABS now gives you all of the wonderful ABS attributes while eliminating the smelly fumes.ABS plastic has always been a great thermoplastic to use in manufacturing and 3D printing for various reasons such as strength and durability. It's why so many commonly used products are made using ABS such as Legos. It has a high glass transition temperature to reduce deformation, but it is also low enough to be safely attainable with standard 3D printers. ABS is a hard strong plastic with increased flexibility when compared to PLA. It is also soluble in Acetone, and it can be easily sanded and machined. Being one of the most widely used filaments in 3D printing, ABS extrudes easily and smoothly with very little stringing or oozing. ABS does cool and shrink after extrusion, so it must be printed on a heated bed and preferably within an enclosed chamber.Extrusion Temperature: 225 - 250 CHeated Bed: 80 - 110 CNet weight: 1 k...
  • Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [0ZAUQZTA]
    Precio:  $152,969.00
    Agregar al Carrito   Vista

    Filamento PETG 1.75mm 1kg COLOR FOTO-1 IMP 3D [0ZAUQZTA]

    -Titulo Original : eSUN 3D 1.75mm PETG Black Filament 1kg (2.2lb), PETG 3D Printer Filament, 1.75mm Solid Opaque Black-Fabricante : ESUN-Descripcion Original: 1KG net (approximately 2.2 lbs) Filament with Clear Spool // eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant // 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) // Recommended Extrusion/Nozzle Temperature 240C - 255C // Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5" // Extrusion Temperature Range: 240 to 255 Celsius Plate temperature: 80~90 Celsius or without heated Printing speed: 30~60mm/s Moving speed: 30~60mm/s 10 Solid/Opaque Colors(Solid Black, Solid White , Solid Red, Solid Silver, Solid Gold, Solid Gray, Solid Blue, Solid Green, Solid Purple, Solid Yellow) and 6 Semi-translucent Colors(Blue, Magenta, Green, Orange, Yellow, Natural). PETG is an excellent material which combines the advantages of other filaments. Odorless; Little shrinkage rate; hydrophobicity (Does not absorb water); Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; Good glossy finish; There are a lot of eSUN PETG clients and experience sharing since it was released in 2014. Ask ESUN/INTSERVO if you need help dial it in. PETG requires slower printing speed than other materials...
  • Filamento de impresoras 3D y bolígrafos 3D normales-22un
    Precio:  $68,019.00
    Agregar al Carrito   Vista

    Filamento de impresoras 3D y bolígrafos 3D normales-22un

    -Titulo Original : 1.75mm 22 Mixed Colors 3D Printing PLA Filament Sample Refill Pack, Each Color 10ft, Total 220ft PLA Refills, Fit For Most 3D Printer & Normal 3D Pen, With Extra 2 Silicone Finger Caps By OEM MIKA3D-Fabricante : OEM MIKA3D-Descripcion Original: - 22 colores mezclados únicos: este surtido de recargas con 2 colores metálicos, 10 colores transparentes y 10 colores sólidos más populares; Estos diversos colores son la mejor opción para todos los dibujos y arte 3D, es un gran regalo para la impresión 3D - Amplia idoneidad: este diámetro de filamento PLA es de 1,75 mm, es ampliamente compatible con la mayoría de las impresoras 3D y bolígrafos 3D del mercado, aunque no es compatible con el bolígrafo 3Doodler, es un excelente paquete de colores de muestra para impresión y dibujo 3D. - Alta calidad: nuestras recargas de filamento PLA con tolerancia de diámetro precisa controlada, paquete al vacío, sin burbujas, ecológico, impresión suave para bolígrafo 3D e impresora 3D - Regalo adicional: 2 tapones de silicona para los dedos, le permiten utilizar el bolígrafo de impresión 3D de forma mucho más segura y sencilla, es un excelente kit de inicio - Servicio y garantía: Confiamos en nuestra calidad de recarga de filamento PLA, respuesta dentro de las 24 horas, si tiene alguna pregunta, por favor infórmenos, haremos todo lo posible por usted. Recargas de filamento de bolígrafo PLA de alta calidad de 22 colores y 1,75 mm: control de diámetro de alta precisión, sin humo y sin tóxicos Los 22 colores más populares y vibrantes incluidos, admite muy bien tanto bolígrafos 3D como impresoras 3D en el mercado # Especificación: Material: Filamento PLA 3D ( Ácido poliláctico) Diámetro: 1,75 mm Tolerancia del diámetro: +/-0,03 mm Temperatura de impresión: 356-428 F (180-220 C) Cantidad: 22 colores, la longitud de cada color es de 10 pies, total 220 pies Empaquetado en un paquete sellado al vacío Regalo adicional: 2 tapas protectoras de silicona para dedos Lista de 22 colores: 2 colores metálicos: metal dorado, metal plateado 6 colores transparentes: natural, azul transparente, amarillo transparente, rojo transparente, verde transparente, morado transparente 14 colores sólidos únicos: blanco, negro, rojo, zafiro Azul, azul cielo, verde, verde lima, amarillo, naranja, rosa, morado, gris, marrón, cian Servicio postventa: Confiamos en la calidad de nuestro filamento PLA. Contáctenos si tiene algún problema con el artículo, dentro de las 24 horas. respuesta, ¡siempre estamos aquí para servirle! ¡Para crear arte 3D y comenzar su impresión 3D ahora...
  • Filamento ABS 3.0mm 1kg COLOR FOTO-1 IMP 3D [1F5YEGGO]
    Precio:  $143,739.00
    Expira: 04/11/2021
    Agregar al Carrito   Vista

    Filamento ABS 3.0mm 1kg COLOR FOTO-1 IMP 3D [1F5YEGGO]

    -Titulo Original : HATCHBOX ABS 3D Printer Filament, Dimensional Accuracy +/- 0.05 mm, 1 kg Spool, 3.00 mm, Pink-Fabricante : HATCHBOX-Descripcion Original: 1 KG (approximately 2.20 lbs.) Spool // Welcome to HATCHBOX 3D Products Our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 3.00mm diameter filament. Our filaments have a dimensional accuracy of +/- 0.05mm. ABS or Acrylonitrile Butadiene Styrene, is a tough and durable thermoplastic. It's ability to with stand higher temperatures, ABS is one of the most popular and commonly chosen material on the market. ABS can be used for full functional models, and is the closest material to real production models. The 3D printed object will have a glossy type finish. Why we love it: Prints at higher temperature, Tough and durable, Requires less manual finishing, Process in acetone for polished finish...
  • Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [6XBNXSZR]
    Precio:  $143,699.00
    Agregar al Carrito   Vista

    Filamento PLA 1.75mm 1kg COLOR FOTO-1 IMP 3D [6XBNXSZR]

    -Titulo Original : WYZworks PLA 1.75mm [ Pink ] Premium Thermoplastic Polylactic Acid 3D Printer Filament - Dimensional Accuracy +/- 0.05mm 1kg / 2.2lb + [ Multiple Color Options Available ]-Fabricante : WYZWORKS-Descripcion Original: THERMOPLASTIC POLYLACTIC ACID [MSDS APPROVED] - With our ultra smooth technology, our filaments are capable to extrude beautifully and smoothly that help to build a more delicate object. Natural PLA Premium Quality MSDS Approved 3D Printer Filament. // HIGH SPECS - PLA [Polylactic Acid] 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) 1 KG (2.20 lbs) Spool 3D Printer Filament Vacuumed Sealed. Quality Black Filament With The Highest Dimensional Accuracy Means The Nozzle Won't Get Blocked. Don't Risk Damaging Your Expensive 3D Printer With Unvetted Filaments. // TEMPERATURE RECOMMENDATION - Recommended Printing Temperature range 170°C - 230°C - PLA allows higher print speed, more accurate placement of material with proper cooling (it does not shrink as much) and also thinner build heights because of less resistance from the plastic coming out the nozzle, where abs even at high temps (252C) is still sticky and has high viscosity. // CUSTOMER SUPPORT - Get The Absolute Best Filament & Support At Half The Cost Of Main Brand Filaments. Save Money Without Risking Your Equipment, Print Quality, & Time! // HIGH COMPATIBLE - For most common 3D printers such as ROBO 3D, Cubify, Leapfrog, MakerBot, Reprap, Afinia, UP, Mendel, flashforge, Solidoodle 2, Printrbot LC, MakerGear M2, Felix, Reprap, Ultimaker and any other 3D printers. //...
Mostrar del 1 al 24 (de 472 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
Destacados
Revisar todos destacados

Información

Información

Nuestras ofertas

Nuestras ofertas

Su cuenta

Su cuenta

Mantente conectado

Mantente conectado

Contáctenos

Contáctenos

elbazardigital.com   © 2024