Arriba

Inicio » Catalogo » Electrónica, Audio y Video » Componentes Electrónicos > Semiconductores > Circuitos Integrados

Componentes Electrónicos > Semiconductores > Circuitos Integrados

Mostrar: 
Mostrar del 1 al 24 (de 180 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Adafruit Ribbon Cables / Idc Cables 10-pin 2x5 Socket-socke
    Precio:  $32,319.00
    Expira: 30/11/2022
    Agregar al Carrito   Vista

    Adafruit Ribbon Cables / Idc Cables 10-pin 2x5 Socket-socke

    -Titulo Original : Ribbon Cables / IDC Cables 10-pin 2x5 Socket-Socket 1.27mm IDC (SWD) Cable - 150mm long (1 piece)-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1675 // Stock Type: Cables >> Cable Assemblies // In Stock & Ready to Ship // These little cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05) pitch SWD programming connectors. We see these connectors often on ARM Cortex dev kits, and have a few handy in our ARM-dev box. We thought you may want a backup cable as well, so now they are in the Adafruit shop! One cable per order. The is 0.06mm/0.025 pitch and the is a 1.27mm (0.05) pitch 2x5 box. These are not for use with programming most AVRs or other large devices that have 0.1 pitch connectors so be aware which you need! 10-pin 2x5 Socket-Socket 1.27mm IDC (SWD) Cable - 150mm long ( 10:37 ...
  • Adafruit Thermocouple Amplifier MAX31855 breakout board (MAX
    Precio:  $75,209.00
    Agregar al Carrito   Vista

    Adafruit Thermocouple Amplifier MAX31855 breakout board (MAX

    -Titulo Original : Adafruit Thermocouple Amplifier MAX31855 breakout board (MAX6675 upgrade) [ADA269]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 269 // Stock Type: Sensors >> Temperature // In Stock & Ready to Ship // Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The MAX31855K does everything for you, and can be easily interfaced with any microcontroller, even one without an analog input. This breakout board has the chip itself, a 3.3V regulator with 10uF bypass capacitors and level shifting circuitry, all assembled and tested. Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any breadboard or perfboard). Goes great with our 1m K-type thermocouple . If you need a thermocouple interface that can handle other types of thermocouples, check out our 'Universal' MAX31856 amplifier board which can be configured in the Arduino sketch to interface with just about any kind of thermocouple New! Now uses the MAX31855K instead of the MAX6675, so it can measure a wider temperature measurement range. Please note! the MAX31855 is not pin compatible or drop-in code compatible with the MAX6675. We do have an Arduino library for both chips but you'll need to adjust any existing MAX6675 designs for the new MAX31855. The MAX6675 has been discontinued by Maxim.Works with any K type thermocoupleWill not work with any other kind of thermocouple other than K type -200°C to +1350°C output in 0.25 degree increments - note that K thermocouples have about ±2°C to ±6°C accuracyInternal temperature reading3.3 to 5v power supply and logic level compliant!SPI data output requires any 3 digital I/O pins. Hey we even have a handy tutorial on thermocouples which includes an Arduino library, wiring diagrams and example code. How easy is that...
  • Adafruit Audio Ic Development Tools Mono 2.5w Class D Audio
    Precio:  $36,169.00
    Agregar al Carrito   Vista

    Adafruit Audio Ic Development Tools Mono 2.5w Class D Audio

    -Titulo Original : Audio IC Development Tools Adafruit Mono 2.5W Class D Audio Amplifier - PAM8302 (1 piece)-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2130 // Stock Type: Breakout Boards >> Amplifiers/Sound // In Stock & Ready to Ship // This super small mono amplifier is surprisingly powerful - able to deliver up to 2.5 Watts into 4-8 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.0V-5.5VDC. Since the amp is a class D, its very efficient (over 90% efficient when driving an 8Î speaker at over half a Watt) - making it perfect for portable and battery-powered projects. It has built in thermal and over-current protection but we could barely tell it got hot. There's even a volume trim pot so you can adjust the volume on the board down from the default 24dB gain. This board is a welcome upgrade to basic LM386 amps! The A+ and A- inputs of the amplifier go through 1.0uF capacitors, so they are fully 'differential' - if you don't have differential outputs, simply tie the Audio- pin  to ground. The output is Bridge Tied - that means the output pins connect directly to the speaker pins, no connection to ground. The output is a high frequency 250KHz square wave PWM that is then 'averaged out' by the speaker coil - the high frequencies are not heard. All the above means that you can't connect the output into another amplifier, it should drive the speakers directly. Comes with a fully assembled and tested breakout board. We also include header to plug it into a breadboard and a 3.5mm screw-terminal blocks so you can easily attach/detach your speaker. You will be ready to rock in 15 minutes! Output Power: 2.5W at 4Î, 10% THD, 1.5W at 8Î, 10% THD, with 5.5V Supply50dB PSRR at 1KHzFilterless design, with ferrite bead + capacitors on output.Fixed 24dB gain, onboard trim potentiometer for adjusting input volume.Thermal and short-circuit/over-current protectionLow current draw: 4mA quiescent and 1uA in shutdown mod...
  • Adafruit 1935Wired Miniature Electret Microphone ADA1935
    Precio:  $25,179.00
    Expira: 04/01/2023
    Agregar al Carrito   Vista

    Adafruit 1935Wired Miniature Electret Microphone ADA1935

    -Titulo Original : Adafruit Wired Miniature Electret Microphone [ADA1935]-Fabricante : Adafruit-Descripcion Original: That's one tiny microphone! At about the size of a mature aphid, this wired Electret Microphone is perfect for your FONA. This microphone's very similar to our PCB-mount Elecret Microphone but is significantly smaller and has pre-attached 65mm long wires. We don't have a specific datasheet for it but it can be biased with 2V and 2K impedence. You do need an electret microphone amplifier to boost the millivolt-signal up to line level. The FONA has this amplifier part built into it but something like an Arduino does not. We tested it with the FONA and it works great for voice purposes, you may also be able to use it with our other microphone amplifiers (like #1713 and #1063) and if you desolder the onboard microphones...
  • Adafruit 1559 Flora RGB Smart NeoPixel Version 2 - Sheet Of
    Precio:  $114,169.00
    Agregar al Carrito   Vista

    Adafruit 1559 Flora RGB Smart NeoPixel Version 2 - Sheet Of

    -Titulo Original : Adafruit Flora RGB Smart NeoPixel Version 2 - Sheet Of 20-Fabricante : Adafruit-Descripcion Original: Designed specifically for wearables // Ultra-bright LEDs with a constant-current driver // Easy to sew and can be daisy-chained // Item Package Quantity: 1 //...
  • Adafruit 40-pin Fpc Extension Board + 200mm Cable (1 Piece)
    Precio:  $47,849.00
    Agregar al Carrito   Vista

    Adafruit 40-pin Fpc Extension Board + 200mm Cable (1 Piece)

    -Titulo Original : Adafruit Accessories 40-pin FPC Extension Board + 200mm Cable (1 piece)-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2098 // Stock Type: Components & Parts >> Sockets/Connectors // In Stock & Ready to Ship // Give your 40 pin, 0.5mm pitch, devices a strrrreeeetch with this extension board.  This 40pin FPC extension board has two 40-pin flex connectors (both are bottom contact type), and an extension cable to add ~22cm (20cm cable plus 2cm board)  Each order comes with one board a 20cm long, 40-pin 0.5mm pitch FPC cable and board. Works great with our 40pin TFTs...
  • Rampa portátil DMI para silla de ruedas, Portátil y Ligera
    Precio:  $657,389.00
    Agregar al Carrito   Vista

    Rampa portátil DMI para silla de ruedas, Portátil y Ligera

    -Titulo Original : DMI Wheelchair Ramp,Entry Ramp,Threshold Ramp And Handicap Ramp Is Portable And Adjustable From 3-5 Ft Long, 4.5 In Wide For Entryway,Doors,Steps,Shed Or Curb,Storage Bag And 2 Ramps Included-Fabricante : DMI-Descripcion Original: - LA RAMPA PARA SILLA DE RUEDAS TIENE UNA SUPERFICIE ANTIDESLIZANTE SEGURA Y DURADERA y es portátil para uso en interiores o exteriores, ya sea en casa o mientras viaja. La rampa es perfecta para escalones, bordillos, cobertizos, entradas o acceso de vehículos para mejorar la seguridad, la estabilidad y la independencia - LA RAMPA PARA HANDICAP es ajustable y retráctil. Las rampas se ajustan de 3 a 5 pies de largo y tienen 7 pulgadas de ancho y el área interior mide 4,5 pulgadas de ancho para adaptarse a una rueda de no más de 4 pulgadas. Los rieles laterales tienen una altura de 2,25 pulgadas para eliminar el deslizamiento - LA RAMPA PORTÁTIL ES RESISTENTE AL ÓXIDO, duradera y liviana. Cada rampa puede soportar hasta 300 libras para un total de 600 libras. Mover, transportar y almacenar las rampas es fácil y sin esfuerzo, ya que solo pesan 6 libras cada una. - RAMPA DE ACCESO A LA RAMPA DE ENTRADA presenta un ensamblaje rápido y fácil sin herramientas para acceder a cualquier lugar para hacer una solución de movilidad segura y duradera temporal, portátil o permanente - RAMPA PARA SILLA DE RUEDAS PARA HOGAR incluye 2 rampas con bolsa de almacenamiento. Asegúrese de medir las ruedas para asegurarse de que no tengan más de 4 pulgadas de ancho. El producto debe ser utilizado por sillas de ruedas ocupadas con la ayuda de otra persona. - Para ser utilizado por sillas de ruedas ocupadas con la asistencia de otra persona - No recomendado para scooters o sillas eléctricas, o aquellos con ruedas desplazadas o menos de 2,5 pulgadas de distancia al suelo del anillo de empuje Las rampas ajustables para sillas de ruedas más vendidas son perfectas para el hogar, ya que los usuarios de sillas de ruedas pueden entrar y salir fácilmente en áreas interiores o exteriores que necesitan asistencia de rampa. Los usuarios de sillas de ruedas también las encontrarán invaluables cuando visiten a amigos o familiares que pueden no tener entradas accesibles. Ligeras y compactas , estas rampas portátiles son fáciles de transportar o almacenar en la cajuela de un automóvil. Cada rampa pesa solo 6 libras, lo que las hace fáciles de levantar y colocar. Se extienden de 3 a 5 pies, para usar en diferentes tamaños y alturas de escalones. La rampa puede soportar 300 libras (600 libras en total entre ellas). Cómo usar Se incluyen dos rampas. Para extender las rampas, tire de las secciones uno y dos hasta que los botones de bloqueo estén completamente extendidos en los orificios y encajen en su lugar. Después del uso, simplemente retírelos y guárdelos en su práctica bolsa de transporte de nailon.Cómo medir las rampas para sillas de ruedasPara calcular la longitud de la rampa, necesitará medir la altura.La altura es la medida entre el suelo y donde Se colocará la parte superior de la rampa. La Ley de Estadounidenses con Discapacidades (ADA, por sus siglas en inglés) exige que las áreas públicas tengan rampas para sillas de ruedas con una inclinación de 4,8 grados o menos (una proporción de 1:12). Esto equivale a un pie de rampa por cada pulgada de elevación. Para áreas residenciales como viviendas, la ADA recomienda una pendiente de 2:12. Esto equivale a un pie de rampa por cada dos pulgadas de elevación. Para calcular la longitud de la rampa, dividirá la subida por dos. Para uso doméstico, estas rampas funcionarían para elevaciones de hasta 10 pulgadas. A continuación, debe medir el ancho de las ruedas. Estas rampas tienen un área de vía interior de 4,5 pulgadas. Asegúrese de que cada rueda no tenga más de 4 pulgadas de ancho...
  • Adafruit (PID 2975) Parts Pal. The ultimate companion for an
    Precio:  $97,529.00
    Agregar al Carrito   Vista

    Adafruit (PID 2975) Parts Pal. The ultimate companion for an

    -Titulo Original : Adafruit (PID 2975) Parts Pal. The ultimate companion for an entry-level maker learning electronics-Fabricante : ADAFRUIT-Descripcion Original: Project box with breadboard and jumper wires // Resistors, Capacitors, LED // Semiconductors (diodes, transistors, 7805, LD1117-3.3, 555 timer) // Photocell, Thermistor, Vibration sensor, potentiometers // Piezo buzzer, tactile switches, SPDT switches, male and female headers // LEDs and passives and transistors and switches oh my! The Adafruit Parts Pal is the ultimate companion for an entry-level maker learning electronics. This kit is your friend whenever you need to build up a project. It contains many of our most popular components and prototyping parts all wrapped up in one parts pack so you can open up and dig right in. Kit Contents: Prototyping: 1x - Storage box with latch 1x - Half-size breadboard 20x - Male/male jumper wires - 3 (75mm) 10x - Male/male jumper wires - 6 (150mm) LEDs: 5x - 5mm Diffused green LEDs 5x - 5mm Diffused red LEDs 1x - 10mm Diffused Common-Anode RGB LED Capacitors: 10x - 1.0uF Ceramic capacitors 10x - 0.1uF Ceramic capacitors 10x - 0.01uF Ceramic capacitors 5x - 10uF 50V Electrolytic capacitors 5x - 100uF 16V Electrolytic capacitors Resistors: 10x - 560 ohm 5% axial resistors 10x - 1K ohm 5% axial resistors 10x - 10K ohm 5% axial resistors 10x - 47K ohm 5% axial resistors Semiconductors: 5x - 1N4001 Diodes 5x - 1N4148 Signal Diodes 5x - NPN Transistor PN2222 TO-92 5x - PNP Transistor PN2907 TO-92 2x - 5V 1.5A Linear voltage regulator - 7805 TO-220 1x - 3.3V 800mA Linear voltage regulator - LD1117-3.3 TO-220 1x - TLC555 wide-voltage range, low-power 555 Timer Sensors: 1x - Photocell 1x - Thermistor (Breadboard version) 1x - Vibration sensor switch 1x - 10K Breadboard trim potentiometer 1x - 1K Breadboard trim potentiometer Mechanical: 1x - Piezo buzzer 5x - 6mm Tactile switches 3x - SPDT slide switches 1x - 40-pin Break-away male header strip 1x - 40-pin female header stri...
  • Adafruit 3297 DRV8833 DC/Stepper Motor Driver Breakout Board
    Precio:  $43,909.00
    Agregar al Carrito   Vista

    Adafruit 3297 DRV8833 DC/Stepper Motor Driver Breakout Board

    -Titulo Original : Adafruit (PID 3297 DRV8833 DC/Stepper Motor Driver Breakout Board-Fabricante : Adafruit-Descripcion Original: DRV8833 motor driver chip // Spin two DC motors or step one bi-polar or uni-polar stepper with up to 1.2A per channel // 2 full H-bridges // 2.7V to 10.8V motor power // DRV8833 an handle a peak of 2A, but only for a short amount of time // Spin two DC motors or step one bi-polar or uni-polar stepper with up to 1.2A per channel using the DRV8833. This motor driver chip is a nice alternative to the TB6612 driver. Like that chip, you get 2 full H-bridges, but this chip is better for low voltage uses (can run from 2.7V up to 10.8V motor power) and has built in current limiting capability. We set it up for 1A current limiting so you don't get more than 2A per chip, but you can also disable the current limiting, or change it to a different limit! We solder on DRV8833 onto a breakout board for you here, with a polarity protection FET on the motor voltage input. Each breakout chip contains two full H-bridges (four half H-bridges). That means you can drive two DC motors bi-directionally, or one stepper motor. Just make sure they're good for about 1.2 Amp or less of current, since that's the limit of this chip. They do handle a peak of 2A but that's just for a short amount of time, if you turn off the current limiting we set. What we like most about this particular driver is that it comes with built in kick-back diodes internally so you dont have to worry about the inductive kick damaging your project or driver! You also don't have to worry as much about burning out the chip with overdriving since there is current limiting. There's two digital inputs per H-bridge (one for each half of the bridge), you can PWM one of the inputs to control motor speed. Runs at 2.7V-10.8V logic/motor power. The motor voltage is the same as the logic voltage, but logic voltage from 2.7V or greater will work so no need to worry if you are powering the motors from 9V and using 3.3V logic. For higher voltages, check out the TB6612. For much higher voltages and currents check out the DRV8871! Comes as one assembled and tested breakout plus a small strip of header. You'll need to do some light soldering to attach the header onto the breakout PCB. Arduino, motors, and power supply not included...
  • Adafruit Through-Hole Resistors - 220 ohm 5% 1/4W - Pack of
    Precio:  $30,679.00
    Agregar al Carrito   Vista

    Adafruit Through-Hole Resistors - 220 ohm 5% 1/4W - Pack of

    -Titulo Original : Adafruit Through-Hole Resistors - 220 ohm 5% 1/4W - Pack of 25 [ADA2780]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2780 // Stock Type: Components & Parts >> Resistors // In Stock & Ready to Ship // ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you!This is a 25 Pack of 220Ω Resistors. More specifically, they are carbon film , through-hole axial type, with 1/4 Watt max dissipation, 300V max voltage, 5% precision resistors. Whew! These are super common and great for use in any kit, breadboard, perf-board, or other project. We got ones with 0.4mm thick wires so they plug in nicely into solder-less breadboards.We have a slew of different resistor packs with different ohms of resistance;  check them all out here ...
  • Adafruit Vibrating Mini Motor Disc [ADA1201]
    Precio:  $32,859.00
    Expira: 15/09/2023
    Agregar al Carrito   Vista

    Adafruit Vibrating Mini Motor Disc [ADA1201]

    -Titulo Original : Adafruit Vibrating Mini Motor Disc [ADA1201]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1201 // Stock Type: Robotics & CNC >> Robotics // In Stock & Ready to Ship // *BZZZZZZZZZZ* Feel that? That's your little buzzing motor, and for any haptic feedback project you'll want to pick up a few of them. These vibe motors are tiny discs, completely sealed up so they're easy to use and embed. Two wires are used to control/power the vibe. Simply provide power from a battery or microcontroller pin (red is positive, blue is negative) and it will buzz away. Works from 2V up to 5V, higher voltages result in more current draw but also a stronger vibration. If you want to reduce the current draw/strength (for example, to control it directly from an Arduino pin) try putting a resistor (100 to 1000 ohms) in series. For full power control, a small PN2222 transistor can control a motor easily, some experimentation may be required! Vibrating Mini Motor Disc ( 6:47 ...
  • Adafruit Industries 1578 Lithium Ion Polymer Battery - 3.7v
    Precio:  $74,399.00
    Agregar al Carrito   Vista

    Adafruit Industries 1578 Lithium Ion Polymer Battery - 3.7v

    -Titulo Original : ADAFRUIT INDUSTRIES 1578 Lithium Ion Polymer Battery - 3.7v 500mAh-Fabricante : ADAFRUIT-Descripcion Original: Kit includes: Circuit Playground Express - Developer Edition USB cable - A/MicroB - 3ft 3 x Alkaline AAA batteries 3 x AAA Battery Holder with On/Off Switch, JST, and Belt Clip Mini Storage Box Here's some of the great goodies baked in to each Circuit Playground: 10 x mini NeoPixels, each one can display any color 1 x Motion sensor (LIS3DH triple-axis accelerometer with tap detection, free-fall detection) 1 x Temperature sensor (thermistor) 1 x Light sensor (phototransistor). Can also act as a color sensor and pulse sensor. 1 x Sound sensor (MEMS microphone) 1 x Mini speaker with class D amplifier (7.5mm magnetic speaker/buzzer) 2 x Push buttons, labeled A and B 1 x Slide switch Infrared receiver and transmitter - can receive and transmit any remote control codes, as well as send messages between Circuit Playground Expresses. Can also act as a proximity sensor. 8 x alligator-clip friendly input/output pins Includes I2C, UART, 8 pins that can do analog inputs, multiple PWM output 7 pads can act as capacitive touch inputs and the 1 remaining is a true analog output Green ON LED so you know its powered Red #13 LED for basic blinking Reset button ATSAMD21 ARM Cortex M0 Processor, running at 3.3V and 48MHz 2 MB of SPI Flash storage, used primarily with CircuitPython to store code and libraries. MicroUSB port for programming and debugging USB port can act like serial port, keyboard, mouse, joystick or MIDI...
  • Adafruit 4279 Ultimate GPS With USB - 66 Channel W/10 Hz Upd
    Precio:  $124,779.00
    Expira: 21/03/2023
    Agregar al Carrito   Vista

    Adafruit 4279 Ultimate GPS With USB - 66 Channel W/10 Hz Upd

    -Titulo Original : Adafruit 4279 Ultimate GPS With USB - 66 Channel W/10 Hz Updates-Fabricante : Adafruit-Descripcion Original: The Bluefruit can also act like an HID Keyboard (for devices that support BLE HID) // Can become a BLE Heart Rate Monitor (a standard profile for BLE) - you just need to add the pulse-detection circuitry // Turn it into a UriBeacon, the Google standard for Bluetooth LE beacons. Just power it and the 'Friend will bleep out a URL to any nearby devices with the UriBeacon app installed. // Built in over-the-air bootloading capability so we can keep you updated with the hottest new firmware. Use any Android or iOS device to get updates and install them! // Add powerful and easy-to-use Bluetooth Low Energy to your robot, art or other electronics project! With BLE now included in modern smart phones and tablets, its fun to add wireless connectivity. So what you really need is the new Adafruit Bluefruit LE SPI Friend! The Bluefruit LE SPI Friend makes it easy to add Bluetooth Low Energy connectivity to anything with 4 or 5 GPIO pins. With SPI, you don't have to worry about baud rates, flow control, or giving up a hardware UART port. Connect to your Arduino or other microcontroller using the common four-pin SPI interface (MISO, MOSI, SCK and CS) plus a 5th GPIO pin for interrupts (to let the Arduino know when data or a response is ready). This multi-function module can do quite a lot! For most people, they'll be very happy to use the standard Nordic UART RX/TX connection profile. In this profile, the Bluefruit acts as a data pipe, that can 'transparently' transmit back and forth from your iOS or Android device. You can use Adafruit's iOS App or Android App, or write your own to communicate with the UART service. If you like Serial communication more than SPI, we also have a version that can talk UART The board is capable of much more than just sending strings over the air! Thanks to an easy to learn AT command set, you have full control over how the device behaves, including the ability to define and manipulate your own GATT Services and Characteristics, or change the way that the device advertises itself for other Bluetooth Low Energy devices to see. You can also use the AT commands to query the die temperature, check the battery voltage, and more, check the connection RSSI or MAC address, and tons more. Really, way too long to list here...
  • Adafruit 12mm Coin Cell Breakout w/On-Off Switch [ADA1867]
    Precio:  $34,489.00
    Expira: 16/01/2022
    Agregar al Carrito   Vista

    Adafruit 12mm Coin Cell Breakout w/On-Off Switch [ADA1867]

    -Titulo Original : Adafruit 12mm Coin Cell Breakout w/On-Off Switch [ADA1867]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1867 // Stock Type: Breakout Boards >> Batteries/Power // In Stock & Ready to Ship // Simple but effective - this breakout board has a CR1220 coin cell battery holder soldered on, an on/off switch and 0.1 pitch breakout pins for easy connecting. Great for powering very low-current projects, or adding a battery backup circuit to a real-time-clock or similar. There's two ground pins, one 'switched' power pin, and one pin that is always on. Comes with one fully assembled and tested breakout plus a small stick of 0.1 header so you can solder it on and plug into a breadboard. We also have a version without a switc...
  • Adafruit Memory IC Development Tools SPI Non-Volatile FRAM B
    Precio:  $41,629.00
    Agregar al Carrito   Vista

    Adafruit Memory IC Development Tools SPI Non-Volatile FRAM B

    -Titulo Original : Memory IC Development Tools Adafruit SPI Non-Volatile FRAM Breakout - 64Kbit / 8KByte (1 piece)-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1897 // Stock Type: Breakout Boards >> Storage // In Stock & Ready to Ship // FRAM, or Ferroelectric Ram, is the coolest new data storage method that all the fashion magazines are talking about. Oh wait, no that's quilted handbags. But FRAM is pretty damn cool too! It's similar to Dynamic random-access memory, only with a ferroelectric layer instead of a dielectric layer. This gives it stable handling (the bytes you write are non-volatile) with dynamic responsiveness (you can write them very fast!) Now, with our SPI FRAM breakout board you can add some FRAM storage to your next DIY project. FRAM allows for a lower power usage and a faster write performance. It's excellent for low-power or inconsistent-power datalogging or data buffering where you want to stream data fast while also keeping the data when there's no power. Unlike Flash or EEPROM there's no pages to worry about. Each byte can be read/written 10,000,000,000,000 times so you don't have to worry too much about wear leveling. This particular FRAM chip has 64 Kbits (8 KBytes) of storage, interfaces using SPI, and can run at up to 20MHz SPI clock rates. Each byte can be read and written instantaneously (like SRAM) but will keep the memory for 95 years at room temperature. We picked up the largest chip that has SPI and is also 5V compliant. You can use this chip with either 3V or 5V power and logic. It comes in a breadboard-friendly breakout and a spare stick of 0.1 male header for soldering on. We also have an I2C FRAM breakout board - which is large in size but slower (1MHz max I2C clock rate...
  • Adafruit 4208 JST SH 4-pin Right Angle Connector 10-Pack - Q
    Precio:  $41,589.00
    Agregar al Carrito   Vista

    Adafruit 4208 JST SH 4-pin Right Angle Connector 10-Pack - Q

    -Titulo Original : Adafruit 4208 JST SH 4-pin Right Angle Connector (10-Pack) - Qwiic Compatible-Fabricante : Adafruit-Descripcion Original: 3.3VDC Power - Red wire on cables // Ground - Black wire on cables // I2C SDA Data - Blue wire on cables // I2C SCL Clock - Yellow wire on cables // If you're a DIY enthusiast who likes to micro-manage your project's connections, here is a 10-pack of some micro JST SH connectors! They're solid plastic with 4 x 1mm pitch through-hole mounting tabs. In an SMT line you can just paste over the through holes and the pads will solder in place. This connector can be used with Qwiic boards and cables, to easily connect sensors and drivers from one board to the other. Match them up with the cables if you want to maintain compatibility (The cables are made symmetrically so don't worry about which side goes where!) When used with Qwiic the pins are: 3.3VDC Power - Red wire on cables Ground - Black wire on cables I2C SDA Data - Blue wire on cables I2C SCL Clock - Yellow wire on cable...
  • Adafruit Resistive Touch Screen to USB Mouse Controller - AR
    Precio:  $83,639.00
    Agregar al Carrito   Vista

    Adafruit Resistive Touch Screen to USB Mouse Controller - AR

    -Titulo Original : Adafruit Resistive Touch Screen to USB Mouse Controller - AR1100-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1580 // Stock Type: Breakout Boards >> Touch // In Stock & Ready to Ship // Getting touchy performance with your screen's touch screen? Resistive touch screens are incredibly popular as overlays to TFT and LCD displays. If you want to connect one to a computer you need something to handle the analog to digital conversion. Most converters we've found are not very easy to use, and are 'fixed' - making them difficult to calibrate. The AR1100 is a nice chip that solves this problem by acting as a touch->USB converter and also comes with calibration software. The calibration software is Windows only, but once you've calibrated you can use the screen on any OS. The AR1100 shows up as a regular Mouse or Digitizer HID device so no drivers are required. We've tested it sucessfully on Mac, Windows, and Debian Linux (Raspbian on a Raspberry Pi). Other Linux distributions may or may not work, but if you're running Linux you're probably used to that.This breakout board features the AR1100, which has both USB and UART interfaces available. 99% of the time, you'll want to use the USB interface but there is some functionality for getting TTL UART data out (see the datasheet for details) There is also a red LED that lights up to indicate when a touch has been detected. For the screens that have 1mm pitch FPC cables, you can plug the cable right into the connector. The majority of medium/large touchscreens have that kind of connector. If you have another kind of touch screen, the four X/Y contacts are available on 0.1 pitch breakouts so you can hand-solder or wire them. We set this breakout up for 4-wire sensing only. You can pretty much just plug and play to get started, for more details including calibration software, check out the AR1100 page . Plug any 1mm-pitch 4-wire resistive touchscreen to the on-board FPC connector, when you plug into a computer's USB port you should see a new device and touching the screen will cause the mouse cursor to move around...
  • Adafruit Colorful Square Tactile Button Switch Assortment -
    Precio:  $43,499.00
    Agregar al Carrito   Vista

    Adafruit Colorful Square Tactile Button Switch Assortment -

    -Titulo Original : Adafruit Colorful Square Tactile Button Switch Assortment - 15 Pack [ADA1010]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1010 // Stock Type: Components & Parts >> Switches // In Stock & Ready to Ship // Little clicky switches are standard input buttons on electronic projects. These work best in a PCB but can be used on a solderless breadboard as shown in this tutorial . The pins are normally open (disconnected) and when the button is pressed they are momentarily closed. These buttons are bigger than the 6mm ones we carry, and come in a pack of 15. Each button comes with a candy-colored square cap that snaps on. You get three of each color-- blue, grey, yellow, green, and red. The square plastic button tops affix easily to the tactile switch body...
  • Adafruit Flora Wearable Bluefruit LE Module [ADA2487]
    Precio:  $59,299.00
    Expira: 15/05/2021
    Agregar al Carrito   Vista

    Adafruit Flora Wearable Bluefruit LE Module [ADA2487]

    -Titulo Original : Adafruit Flora Wearable Bluefruit LE Module [ADA2487]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2487 // Stock Type: Wearables >> FLORA >> Boards // In Stock & Ready to Ship // Would you like to add powerful and easy-to-use Bluetooth Low Energy to your wearable FLORA project? Heck yeah! With BLE now included in modern smart phones and tablets, its fun to add wireless connectivity. So what you really need is the new Adafruit Flora Bluefruit LE!The Flora Bluefruit LE makes it easy to add Bluetooth Low Energy connectivity to your Flora. Sew 4 traces (or solder 4 wires) and BooM! Bluetooth Low Energy! Get started fast with the Bluefruit App! Using our Bluefruit  iOS App  or  Android App , you can quickly get your interactive project prototyped by using your iOS or Android phone/tablet as a controller. We have a  color picker , quaternion/accelerometer/gyro/magnetometer or location (GPS) , and an 8-button  control game pad . After you connect to the Bluefruit, you can send commands wirelessly in under 10 minutesFor advanced hackers, they'll be very happy to use the standard Nordic UART RX/TX connection profile. In this profile, the Bluefruit acts as a data pipe, that can 'transparently' transmit back and forth from your iOS or Android device. You can use our  iOS App  or  Android App , or write your own to communicate with the UART service . You can do a lot more too!   The Bluefruit can also act like an HID Keyboard  (for devices that support BLE HID) Can become a BLE Heart Rate Monitor  (a standard profile for BLE) - you just need to add the pulse-detection circuitry Turn it into a UriBeacon , the Google standard for Bluetooth LE beacons. Just power it and the Bluefruit will bleep out a URL to any nearby devices with the UriBeacon app installed. Built in over-the-air bootloading capability so we can keep you updated with the hottest new firmware . Use any Android or iOS device to get updates and install them! This is the same module and firmware as our BLE UART Friend &n...
  • Adafruit 1332 Membrane 1x4 Keypad Extras ADA1332
    Precio:  $32,469.00
    Agregar al Carrito   Vista

    Adafruit 1332 Membrane 1x4 Keypad Extras ADA1332

    -Titulo Original : Adafruit Membrane 1x4 Keypad Extras [ADA1332]-Fabricante : Adafruit-Descripcion Original: Easy to use keypad for your Arduino or Raspberry Pi project // This keypad has 4 buttons, and since every key has its own wire line, no matrix code is required // The membrane is soft and has a removable paper backing to expose a strong adhesive // Includes a 5-pin extra-long header strip so you can plug this into a breadboard with ease. // Keypad dimensions: 69.14mm / 2.72" x 20.07mm / 0.79" // Punch in your secret key into this numeric membrane keypad. This keypad has 4 buttons, and since every key has its own wire line, no matrix code is required - just treat these like every day switches. The membrane is soft and has a removable paper backing to expose a strong adhesive so you can stick this on an enclosure and feed the cable through a slot. Its a simple keypad but that's why we like it. We include a 5-pin extra-long header strip so you can plug this into a breadboard with ease. Technical Details Weight: 2.83g Keypad dimensions: 69.14mm / 2.72 x 20.07mm / 0.79 Length of cable + connector: 87.31mm / 3.43 x 14.28mm / 0.56 5-pin 0.1 pitch connecto...
  • Adafruit 3296 DS1307 Real Time Clock Breakout Board
    Precio:  $45,709.00
    Agregar al Carrito   Vista

    Adafruit 3296 DS1307 Real Time Clock Breakout Board

    -Titulo Original : Adafruit 3296 DS1307 Real Time Clock Breakout Board-Fabricante : Adafruit-Descripcion Original: DS1307 Real Time Clock Breakout Board This real time clock (RTC) with battery backup allows your microcontroller project to keep track of time even if it's reprogrammed or if the power is lost. It's perfect for data logging, clock-building, time stamping, timers, alarms, and more. The DS1307 is the most popular RTC but it requires 5V power to work (although we've used it with 5V power and 3.3V logic successfully). The DS1307 is simple and inexpensive but not a high precision device. It may lose or gain up to 2 seconds a day. For a high-precision, temperature compensated alternative, take a look at the DS3231 precision RTC . It works great with an Arduino using our RTC library or with a Raspberry Pi (or similar single board linux computer) . Note: This product does not come with a CR1220 coin cell battery. We recommend you purchase a CR1220 coin cell battery to use with this product. Features PCB & header are included Plugs into any breadboard, or you can use wires Two mounting holes Will keep time for 5 years or more Specifications Length: 25.8mm/1.02in Width: 21.7mm/0.85in Height: 5mm/0.2in Weight: 2.3g/0.09oz Mounting holes are 2.2mm(0.086in) diameter, 25mm(0.98in) apart This board/chip uses I²C 7-bit address 0x68 . Made in China...
  • Adafruit Flora Accelerometer/Compass Sensor - LSM303 [ADA124
    Precio:  $94,059.00
    Expira: 25/01/2021
    Agregar al Carrito   Vista

    Adafruit Flora Accelerometer/Compass Sensor - LSM303 [ADA124

    -Titulo Original : Adafruit Flora Accelerometer/Compass Sensor - LSM303 [ADA1247]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1247 // Stock Type: Wearables >> FLORA >> Boards // In Stock & Ready to Ship // Add motion and direction sensing to your wearable FLORA project with this high precision 3-axis Accelerometer+Compass sensor. Inside are two sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth (by measuring gravity) or how fast the board is accelerating in 3D space. The other is a magnetometer that can sense where the strongest magnetic force is coming from, generally used to detect magnetic north. By combining this data you can then orient yourself. We based this sensor on the latest version of this popular sensor, the LSM303DLHC. The sensor has a digital (I2C) interface. Attaching it to the FLORA is simple: line up the sensor so its adjacent to the SDA/SCL pins and sew conductive thread from the 3V, SDA, SCL and GND pins. They line up perfectly so you will not have any crossed lines. You can only connect one of these sensors to your FLORA, but you can connect other I2C sensors/outputs by using the set of SCL/SDA pins on the opposite side. Get started with the FLORA Accelerometer with our guide on the Adafruit Learning System ! It uses the same Arduino library as our conventional form LSM303 breakout. The example and library code will work 'out of the box' with FLORA. Simply download our library and connect the 3V/SCL/SDA/GND pins, install the library properly and upload our test program to read out accelerometer and magnetic field data. Flora Accelerometer/Compass Sensor - LSM303 ( 17:38 ...
  • placa Si5351 I2c Iic High Frequency Signal Generator +acc 2u
    Precio:  $56,669.00
    Agregar al Carrito   Vista

    placa Si5351 I2c Iic High Frequency Signal Generator +acc 2u

    -Titulo Original : AITIAO 2Pcs Si5351 I2C IIC High Frequency Signal Generator DC 3V-5V CJMCU-5351 Si5351A Clock Generator Breakout Board 8KHz To 160MHz Square Wave Frequency Generator With Dupont Cable-Fabricante : AITIAO-Descripcion Original: - El Si5351 es un generador de reloj configurable I2C que es ideal para reemplazar cristales, osciladores de cristal, VCXO, bucles de bloqueo de fase (PLL) y buffers de distribución en aplicaciones sensibles al costo. - Este chip tiene una referencia de cristal de precisión de 25MHz y PLL y divisores internos para que pueda generar casi cualquier frecuencia, desde...
  • Adafruit Mini Pan-Tilt Kit - Assembled with Micro Servos
    Precio:  $89,359.00
    Agregar al Carrito   Vista

    Adafruit Mini Pan-Tilt Kit - Assembled with Micro Servos

    -Titulo Original : Adafruit Mini Pan-Tilt Kit - Assembled with Micro Servos-Fabricante : ADAFRUIT-Descripcion Original: Service will take place at the customer's location // Removal of existing CPU from desktop // Installation of one customer-supplied CPU // Installing new drivers // Component test and cleanup // This fully-assembled pan-tilt kit is the perfect way to give your project full range motion with two micro servos. The pan-tilt can rotate roughly 180° from side-to-side and can tilt up&downwards around 150°. It also comes fully assembled with two Micro Servos (SG-90 or SG-92 type) included and a 38mm x 36mm space to mount a camera or sensor or whatever you like. Since the motors are plain, every-day analog servos, you can use any microcontroller or driver. They're good for beginners who want to make stuff move and the pan-tilt is an easy way to give whatever you're making both left-right and up-down motion. In our demo, we hooked this up with a Trinket Pro and made it do a little dance with the Arduino Servo library...
Mostrar del 1 al 24 (de 180 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
Destacados
Revisar todos destacados

Información

Información

Nuestras ofertas

Nuestras ofertas

Su cuenta

Su cuenta

Mantente conectado

Mantente conectado

Contáctenos

Contáctenos

elbazardigital.com   © 2024