Arriba

Inicio » Catalogo » Electrónica, Audio y Video » Componentes Electrónicos > Semiconductores > Circuitos Integrados

Componentes Electrónicos > Semiconductores > Circuitos Integrados

Mostrar: 
Mostrar del 1 al 24 (de 177 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Adafruit Ribbon Cables / Idc Cables 10-pin 2x5 Socket-socke
    Precio:  $33,159.00
    Expira: 30/11/2022
    Agregar al Carrito   Vista

    Adafruit Ribbon Cables / Idc Cables 10-pin 2x5 Socket-socke

    -Titulo Original : Ribbon Cables / IDC Cables 10-pin 2x5 Socket-Socket 1.27mm IDC (SWD) Cable - 150mm long (1 piece)-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1675 // Stock Type: Cables >> Cable Assemblies // In Stock & Ready to Ship // These little cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05) pitch SWD programming connectors. We see these connectors often on ARM Cortex dev kits, and have a few handy in our ARM-dev box. We thought you may want a backup cable as well, so now they are in the Adafruit shop! One cable per order. The is 0.06mm/0.025 pitch and the is a 1.27mm (0.05) pitch 2x5 box. These are not for use with programming most AVRs or other large devices that have 0.1 pitch connectors so be aware which you need! 10-pin 2x5 Socket-Socket 1.27mm IDC (SWD) Cable - 150mm long ( 10:37 ...
  • Adafruit Thermocouple Amplifier MAX31855 breakout board (MAX
    Precio:  $73,649.00
    Agregar al Carrito   Vista

    Adafruit Thermocouple Amplifier MAX31855 breakout board (MAX

    -Titulo Original : Adafruit Thermocouple Amplifier MAX31855 breakout board (MAX6675 upgrade) [ADA269]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 269 // Stock Type: Sensors >> Temperature // In Stock & Ready to Ship // Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The MAX31855K does everything for you, and can be easily interfaced with any microcontroller, even one without an analog input. This breakout board has the chip itself, a 3.3V regulator with 10uF bypass capacitors and level shifting circuitry, all assembled and tested. Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any breadboard or perfboard). Goes great with our 1m K-type thermocouple . If you need a thermocouple interface that can handle other types of thermocouples, check out our 'Universal' MAX31856 amplifier board which can be configured in the Arduino sketch to interface with just about any kind of thermocouple New! Now uses the MAX31855K instead of the MAX6675, so it can measure a wider temperature measurement range. Please note! the MAX31855 is not pin compatible or drop-in code compatible with the MAX6675. We do have an Arduino library for both chips but you'll need to adjust any existing MAX6675 designs for the new MAX31855. The MAX6675 has been discontinued by Maxim.Works with any K type thermocoupleWill not work with any other kind of thermocouple other than K type -200°C to +1350°C output in 0.25 degree increments - note that K thermocouples have about ±2°C to ±6°C accuracyInternal temperature reading3.3 to 5v power supply and logic level compliant!SPI data output requires any 3 digital I/O pins. Hey we even have a handy tutorial on thermocouples which includes an Arduino library, wiring diagrams and example code. How easy is that...
  • Adafruit Audio Ic Development Tools Mono 2.5w Class D Audio
    Precio:  $38,789.00
    Agregar al Carrito   Vista

    Adafruit Audio Ic Development Tools Mono 2.5w Class D Audio

    -Titulo Original : Audio IC Development Tools Adafruit Mono 2.5W Class D Audio Amplifier - PAM8302 (1 piece)-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2130 // Stock Type: Breakout Boards >> Amplifiers/Sound // In Stock & Ready to Ship // This super small mono amplifier is surprisingly powerful - able to deliver up to 2.5 Watts into 4-8 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.0V-5.5VDC. Since the amp is a class D, its very efficient (over 90% efficient when driving an 8Î speaker at over half a Watt) - making it perfect for portable and battery-powered projects. It has built in thermal and over-current protection but we could barely tell it got hot. There's even a volume trim pot so you can adjust the volume on the board down from the default 24dB gain. This board is a welcome upgrade to basic LM386 amps! The A+ and A- inputs of the amplifier go through 1.0uF capacitors, so they are fully 'differential' - if you don't have differential outputs, simply tie the Audio- pin  to ground. The output is Bridge Tied - that means the output pins connect directly to the speaker pins, no connection to ground. The output is a high frequency 250KHz square wave PWM that is then 'averaged out' by the speaker coil - the high frequencies are not heard. All the above means that you can't connect the output into another amplifier, it should drive the speakers directly. Comes with a fully assembled and tested breakout board. We also include header to plug it into a breadboard and a 3.5mm screw-terminal blocks so you can easily attach/detach your speaker. You will be ready to rock in 15 minutes! Output Power: 2.5W at 4Î, 10% THD, 1.5W at 8Î, 10% THD, with 5.5V Supply50dB PSRR at 1KHzFilterless design, with ferrite bead + capacitors on output.Fixed 24dB gain, onboard trim potentiometer for adjusting input volume.Thermal and short-circuit/over-current protectionLow current draw: 4mA quiescent and 1uA in shutdown mod...
  • Adafruit 1946 FONA - Mini Cellular GSM Breakout UFL Version
    Precio:  $194,159.00
    Agregar al Carrito   Vista

    Adafruit 1946 FONA - Mini Cellular GSM Breakout UFL Version

    -Titulo Original : Adafruit (PID 1946 FONA - Mini Cellular GSM Breakout UFL Version-Fabricante : Adafruit-Descripcion Original: Send and receive SMS messages // Send and receive GRPS data (TCP/IP, HTTP, etc) // Scan and receive FM radio broadcasts // NOT INCLUDED: Microcontroller, external antenna, SIM card, other components to complete your project // Soldering is required // Introducing Adafruit FONA MiniGSM, an adorable all-in-one cellular phone module that lets you add voice, text, SMS and data to your project in an adorable little package. This module measures only 1.75x1.25. At the heart is a GSM cellular module (we use the latest SIM800). This module can do just about everything. This version has a uFL connector. Quad-band 850/900/1800/1900MHz - connect onto any global GSM network with any 2G SIM (in the USA, T-Mobile is suggested) Make and receive voice calls using a headset OR an external 8Ω speaker + electret microphone Send and receive SMS messages Send and receive GPRS data (TCP/IP, HTTP, etc.) Scan and receive FM radio broadcasts (yeah, we don't exactly know why this was included but it works really well) PWM/Buzzer vibrational motor control AT command interface with auto baud detection Sounds delicious, right? So we plated this fine module onto a little breakout with all the extras you need to make your next project shine: Onboard LiPoly battery charging circuitry so you can take your project on the go. Use any 500mAh+ LiPoly or LiIon battery and recharge over the MicroUSB when necessary. Two LEDs let you know when its charging and done Standard 4-pole TRRS headphone jack. Use any 'Android' or 'iPhone'-compatible headset with mic Breakouts for external 8Ω speaker and electret mic if you don't want to use a headphone Level shifting circuitry so you can run it with 2.8V to 5V logic. Vibrational motor (buzzer) driver so you can have noiseless notifications uFL connections for external antenna Indicator LEDs for power and network connectivity Standard SIM slides into the back On its own, this module can't do anything. It requires a microcontroller to drive it! We suggest and use an Arduino but any 3-5V microcontroller with a UART can send and receive commands over the RX/TX pins...
  • Adafruit 2829 Feather 32u4 Bluefruit LE ADA2829
    Precio:  $125,609.00
    Agregar al Carrito   Vista

    Adafruit 2829 Feather 32u4 Bluefruit LE ADA2829

    -Titulo Original : Adafruit Feather 32u4 Bluefruit LE [ADA2829]-Fabricante : Adafruit-Descripcion Original: The Bluefruit can also act like an HID Keyboard (for devices that support BLE HID) // Can become a BLE Heart Rate Monitor (a standard profile for BLE) - you just need to add the pulse-detection circuitry // Turn it into a UriBeacon, the Google standard for Bluetooth LE beacons. Just power it and the 'Friend will bleep out a URL to any nearby devices with the UriBeacon app installed. // Built in over-the-air bootloading capability so we can keep you updated with the hottest new firmware. Use any Android or iOS device to get updates and install them. This will update the native code on the BLE module, to add new wireless capabilities, not program the ATmega chip. // This is the Adafruit Feather 32u4 Bluefruit - our take on an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built in USB and battery charging. Its an Adafruit Feather 32u4 with a BTLE module, ready to rock! We have other boards in the Feather family, check'em out here. Bluetooth Low Energy is the hottest new low-power, 2.4GHz spectrum wireless protocol. In particular, its the only wireless protocol that you can use with iOS without needing special certification and it's supported by all modern smart phones. This makes it excellent for use in portable projects that will make use of an iOS or Android phone or tablet. It also is supported in Mac OS X and Windows 8+. At the Feather 32u4's heart is at ATmega32u4 clocked at 8 MHz and at 3.3V logic, a chip setup we've had tons of experience with as it's the same as the Flora. This chip has 32K of flash and 2K of RAM, with built in USB so not only does it have a USB-to-Serial program & debug capability built in with no need for an FTDI-like chip, it can also act like a mouse, keyboard, USB MIDI device, etc. To make it easy to use for portable projects, we added a connector for any of our 3.7V Lithium polymer batteries and built in battery charging. You don't need a battery, it will run just fine straight from the micro USB connector. But, if you do have a battery, you can take it on the go, then plug in the USB to recharge. The Feather will automatically switch over to USB power when its available. We also tied the battery thru a divider to an analog pin, so you can measure and monitor the battery voltage to detect when you need a recharge. The Feather 32u4 Bluefruit LE uses the extra space left over to add our excellent Bluefruit BTLE module + two status indicator LEDs...
  • Adafruit 40-pin Fpc Extension Board + 200mm Cable (1 Piece)
    Precio:  $48,689.00
    Agregar al Carrito   Vista

    Adafruit 40-pin Fpc Extension Board + 200mm Cable (1 Piece)

    -Titulo Original : Adafruit Accessories 40-pin FPC Extension Board + 200mm Cable (1 piece)-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2098 // Stock Type: Components & Parts >> Sockets/Connectors // In Stock & Ready to Ship // Give your 40 pin, 0.5mm pitch, devices a strrrreeeetch with this extension board.  This 40pin FPC extension board has two 40-pin flex connectors (both are bottom contact type), and an extension cable to add ~22cm (20cm cable plus 2cm board)  Each order comes with one board a 20cm long, 40-pin 0.5mm pitch FPC cable and board. Works great with our 40pin TFTs...
  • Cable lcd For Dell G3 3500 G5 5500 G5 5505 01f2kr 1f2kr
    Precio:  $70,539.00
    Agregar al Carrito   Vista

    Cable lcd For Dell G3 3500 G5 5500 G5 5505 01f2kr 1f2kr

    -Titulo Original : Suyitai LCD LVDS LED EDP 144Hz 40PIN Ribbon Video Screen Video Display Cable Wire Line Replacement For Dell G3 3500 G5 5500 G5 5505 01F2KR 1F2KR 450.0K702.0001-Fabricante : Suyitai-Descripcion Original: - Solo necesita el precio razonable, puede obtener un juego de ajedrez hecho de madera real. Nuestros productos también son respetuosos con el medio ambiente, por lo que no se tiñen con ningún proceso químico y tienen un alto nivel de seguridad. - A y A es actualmente el escaso ajedrez del mercado que cumple con las dimensiones estándar. 15 incrustaciones de tablero con cuadrados de 1,65 (fresno europeo/arce), mientras se equipa con piezas Staunton de 3 king y 1,15 de diámetro de base. (el rey mide el doble de la altura de los cuadrados y el diámetro de la base es el 75 por ciento de los cuadrados). - El uso de piezas premium de triple peso brinda comodidad y tranquilidad al usar la tabla, al mismo tiempo que hace que sea menos probable que se vuelque. La almohadilla de vellón en la parte inferior de la pieza de ajedrez protege la superficie del tablero y mejora la resistencia al deslizamiento. El diseño del cajón mantiene el polvo fuera de las piezas de ajedrez y permite un fácil almacenamiento. - Tanto la practicidad como la estética, nuestro juego de ajedrez, pero también tiene una mano de obra meticulosa y detalles sorprendentes, no solo es una colección, sino también una opción perfecta para regalos navideños...
  • Adafruit (PID 2975) Parts Pal. The ultimate companion for an
    Precio:  $99,249.00
    Agregar al Carrito   Vista

    Adafruit (PID 2975) Parts Pal. The ultimate companion for an

    -Titulo Original : Adafruit (PID 2975) Parts Pal. The ultimate companion for an entry-level maker learning electronics-Fabricante : ADAFRUIT-Descripcion Original: Project box with breadboard and jumper wires // Resistors, Capacitors, LED // Semiconductors (diodes, transistors, 7805, LD1117-3.3, 555 timer) // Photocell, Thermistor, Vibration sensor, potentiometers // Piezo buzzer, tactile switches, SPDT switches, male and female headers // LEDs and passives and transistors and switches oh my! The Adafruit Parts Pal is the ultimate companion for an entry-level maker learning electronics. This kit is your friend whenever you need to build up a project. It contains many of our most popular components and prototyping parts all wrapped up in one parts pack so you can open up and dig right in. Kit Contents: Prototyping: 1x - Storage box with latch 1x - Half-size breadboard 20x - Male/male jumper wires - 3 (75mm) 10x - Male/male jumper wires - 6 (150mm) LEDs: 5x - 5mm Diffused green LEDs 5x - 5mm Diffused red LEDs 1x - 10mm Diffused Common-Anode RGB LED Capacitors: 10x - 1.0uF Ceramic capacitors 10x - 0.1uF Ceramic capacitors 10x - 0.01uF Ceramic capacitors 5x - 10uF 50V Electrolytic capacitors 5x - 100uF 16V Electrolytic capacitors Resistors: 10x - 560 ohm 5% axial resistors 10x - 1K ohm 5% axial resistors 10x - 10K ohm 5% axial resistors 10x - 47K ohm 5% axial resistors Semiconductors: 5x - 1N4001 Diodes 5x - 1N4148 Signal Diodes 5x - NPN Transistor PN2222 TO-92 5x - PNP Transistor PN2907 TO-92 2x - 5V 1.5A Linear voltage regulator - 7805 TO-220 1x - 3.3V 800mA Linear voltage regulator - LD1117-3.3 TO-220 1x - TLC555 wide-voltage range, low-power 555 Timer Sensors: 1x - Photocell 1x - Thermistor (Breadboard version) 1x - Vibration sensor switch 1x - 10K Breadboard trim potentiometer 1x - 1K Breadboard trim potentiometer Mechanical: 1x - Piezo buzzer 5x - 6mm Tactile switches 3x - SPDT slide switches 1x - 40-pin Break-away male header strip 1x - 40-pin female header stri...
  • Adafruit 2999 ATWINC1500 WiFi Breakout
    Precio:  $136,489.00
    Agregar al Carrito   Vista

    Adafruit 2999 ATWINC1500 WiFi Breakout

    -Titulo Original : Adafruit ATWINC1500 WiFi Breakout-Fabricante : Adafruit-Descripcion Original: Connect your Arduino to the Internet with this fine new FCC-certified WiFi module from Atmel. This 802.11bgn-capable WiFi module is the best new thing for networking your devices, with SSL support and rock solid performance - running our adafruit.io MQTT demo for a full weekend straight with no hiccups (it would have run longer but we had to go to work, so we unplugged it). We like these so much, they've completely replaced the CC3000 module on all our projects. The Adafruit ATWINC1500 WiFi Breakout uses SPI to communicate, so with about 6 wires, you can get your wired up and ready to go. Right now the Atmel-supplied library works great with Arduino Zero, and seems to work OK on Uno but may not work on other Arduinos. You can clock it as fast as 12MHz for speedy, reliable packet streaming. And scanning/connecting to networks is very fast, a few seconds. This module works with 802.11b, g, or n networks & supports WEP, WPA and WPA2 encryption. The datasheet says it can do Soft-AP mode but we don't have any code to actually use that. Since this is our new favoritest SPI-protocol WiFi module we've decided to make a little breakout for it. The breakout comes with level shifting on all the input pins so you can use it with 3V or 5V logic. A 3.3V voltage regulator that can handle the 300mA spikes lets you power from 3-5.5VDC. There's also 3 LEDs that you can control over the SPI interface (part of the library code) or you can have controlled by the Arduino library. They'll light up when connected to an SSID, or transmitting data...
  • Adafruit Conductive Fiber - Stainless Steel 20um - 10 grams
    Precio:  $36,389.00
    Agregar al Carrito   Vista

    Adafruit Conductive Fiber - Stainless Steel 20um - 10 grams

    -Titulo Original : Adafruit Conductive Fiber - Stainless Steel 20um - 10 grams [ADA1088]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1088 // Stock Type: Wearables >> Materials >> Other // In Stock & Ready to Ship // This conductive fiber is super interesting! It's great for felting and could also be spun into yarn if that's your thing. We tested many different fiber thicknesses for needle felting and found that this one (20um fiber thickness) is the most pleasurable to work with. Use about 0.2g of the stuff to make a felt touch button suitable for use with the MaKey MaKey or capacitive touch sensing circuit. Make felt controllers or felt buttons onto an existing wool sweater!  You can also make a squeeze/pressure sensor with this fiber, as it becomes less resistive the more you squeeze the fibers together. Make sure to combine this fiber with a natural animal fiber (which have scales) for best results. We think 10g is the perfect amount and will get you through several projects. MaKey MaKey and alligator clips not included...
  • Adafruit DS3231 Precision RTC FeatherWing - RTC Add-on For F
    Precio:  $44,809.00
    Agregar al Carrito   Vista

    Adafruit DS3231 Precision RTC FeatherWing - RTC Add-on For F

    -Titulo Original : Adafruit DS3231 Precision RTC FeatherWing - RTC Add-on For Feather Boards [ADA3028]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 3028 // Stock Type: Development Boards >> Feather >> Wings // In Stock & Ready to Ship // A Feather board without ambition is a Feather board without FeatherWings! This is the DS3231 Precision RTC FeatherWing : it adds an extremely accurate I2C-integrated Real Time Clock (RTC) with a Temperature Compensated Crystal Oscillator (TCXO)  to any Feather main board. This RTC is the most precise you can get in a small, low power package. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight! Check out our range of Feather boards here. Most RTCs use an external 32kHz timing crystal that is used to keep time with low current draw. And that's all well and good, but those crystals have slight drift, particularly when the temperature changes (the temperature changes the oscillation frequency very very very slightly but it does add up!) This RTC is in a beefy package because the crystal is inside the chip! And right next to the integrated crystal is a temperature sensor. That sensor compensates for the frequency changes by adding or removing clock ticks so that the timekeeping stays on schedule.With a CR1220 12mm coin cell plugged into the top of the FeatherWing, you can get years of precision timekeeping, even when main power is lost. Great for datalogging and clocks, or anything where you need to really know the time. A CR1220 coin cell is required to use the battery-backup capabilities! We don't include one by default, to make shipping easier for those abroad,  but we do stock them so pick one up or use any CR1220 you have handy. Our tutorial for the DS3231 breakout has all the library and example code you need to get started, works with any and all of our Feathers via the Arduino IDE Check out our range of Feather boards here...
  • Adafruit Industries 1578 Lithium Ion Polymer Battery - 3.7v
    Precio:  $75,709.00
    Agregar al Carrito   Vista

    Adafruit Industries 1578 Lithium Ion Polymer Battery - 3.7v

    -Titulo Original : ADAFRUIT INDUSTRIES 1578 Lithium Ion Polymer Battery - 3.7v 500mAh-Fabricante : ADAFRUIT-Descripcion Original: Kit includes: Circuit Playground Express - Developer Edition USB cable - A/MicroB - 3ft 3 x Alkaline AAA batteries 3 x AAA Battery Holder with On/Off Switch, JST, and Belt Clip Mini Storage Box Here's some of the great goodies baked in to each Circuit Playground: 10 x mini NeoPixels, each one can display any color 1 x Motion sensor (LIS3DH triple-axis accelerometer with tap detection, free-fall detection) 1 x Temperature sensor (thermistor) 1 x Light sensor (phototransistor). Can also act as a color sensor and pulse sensor. 1 x Sound sensor (MEMS microphone) 1 x Mini speaker with class D amplifier (7.5mm magnetic speaker/buzzer) 2 x Push buttons, labeled A and B 1 x Slide switch Infrared receiver and transmitter - can receive and transmit any remote control codes, as well as send messages between Circuit Playground Expresses. Can also act as a proximity sensor. 8 x alligator-clip friendly input/output pins Includes I2C, UART, 8 pins that can do analog inputs, multiple PWM output 7 pads can act as capacitive touch inputs and the 1 remaining is a true analog output Green ON LED so you know its powered Red #13 LED for basic blinking Reset button ATSAMD21 ARM Cortex M0 Processor, running at 3.3V and 48MHz 2 MB of SPI Flash storage, used primarily with CircuitPython to store code and libraries. MicroUSB port for programming and debugging USB port can act like serial port, keyboard, mouse, joystick or MIDI...
  • Adafruit 4367 Circuit Playground TFT Gizmo - Bolt-on Display
    Precio:  $105,089.00
    Expira: 31/08/2022
    Agregar al Carrito   Vista

    Adafruit 4367 Circuit Playground TFT Gizmo - Bolt-on Display

    -Titulo Original : Adafruit 4367 Circuit Playground TFT Gizmo - Bolt-on Display Audio Amplifier-Fabricante : Adafruit-Descripcion Original: ets you add a lovely color display in a sturdy and reliable fashion // This PCB looks just like a round TFT breakout but has permanently affixed M3 standoffs that act as mechanical and electrical connections. // Once attached you'll get a 1.54" 240x240 IPS display with backlight control, // two 3-pin STEMMA connectors for attaching NeoPixel strips or servos, and a Class D audio amplifier with a Molex PicoBlade connector that can plug one of our lil speakers. // 53.3mm x 53.3mm x 9.4mm / 2.1" x 2.1" x 0.4" // Extend and expand your Circuit Playground projects with a bolt on TFT Gizmo that lets you add a lovely color display in a sturdy and reliable fashion. This PCB looks just like a round TFT breakout but has permanently affixed M3 standoffs that act as mechanical and electrical connections. Once attached you'll get a 1.54 240x240 IPS display with backlight control, two 3-pin STEMMA connectors for attaching NeoPixel strips or servos, and a Class D audio amplifier with a Molex PicoBlade connector that can plug one of our lil speakers. This is a great companion for our Circuit Playground Express or Bluefruit boards thanks to their fast SPI hardware speeds, and works in Arduino and CircuitPython. If you're using this with Circuit Playground Express and CircuitPython, you won't be able to do a lot because there isn't a ton of memory - mostly just displaying the REPL and maybe running an image slideshow. For CircuitPython use, the Bluefruit is recommended and works really great! You can use it with the Circuit Playground Classic in Arduino but it won't be very fast, as you have to bitbang the SPI - and the display has a lot of pixels - so it's not recommended. You'll have a very slow display. Comes with a PCB that has pre-soldered standoffs attached, and 12x M3 screws for attachment. Fits all Circuit Playgrounds but like we mentioned earlier, the Express and Bluefruit are recommended...
  • Adafruit 12mm Coin Cell Breakout w/On-Off Switch [ADA1867]
    Precio:  $36,399.00
    Expira: 16/01/2022
    Agregar al Carrito   Vista

    Adafruit 12mm Coin Cell Breakout w/On-Off Switch [ADA1867]

    -Titulo Original : Adafruit 12mm Coin Cell Breakout w/On-Off Switch [ADA1867]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1867 // Stock Type: Breakout Boards >> Batteries/Power // In Stock & Ready to Ship // Simple but effective - this breakout board has a CR1220 coin cell battery holder soldered on, an on/off switch and 0.1 pitch breakout pins for easy connecting. Great for powering very low-current projects, or adding a battery backup circuit to a real-time-clock or similar. There's two ground pins, one 'switched' power pin, and one pin that is always on. Comes with one fully assembled and tested breakout plus a small stick of 0.1 header so you can solder it on and plug into a breadboard. We also have a version without a switc...
  • Adafruit Mini Metal Speaker w/ Wires - 8 ohm 0.5W [ADA1890]
    Precio:  $30,649.00
    Expira: 17/06/2021
    Agregar al Carrito   Vista

    Adafruit Mini Metal Speaker w/ Wires - 8 ohm 0.5W [ADA1890]

    -Titulo Original : Adafruit Mini Metal Speaker w/ Wires - 8 ohm 0.5W [ADA1890]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1890 // Stock Type: Components & Parts >> Speakers // In Stock & Ready to Ship // Listen up! This tiny 1 diameter speaker cone is the perfect addition to any small audio project where you need an 8 Ω impedance and will be using 0.5W or less of power. We particularly like this cone as it's very simple and its metal body is extremely lightweight. It's very similar to the speaker in the Drawdio kit. Works great with our Wave shield or class D amplifier board . Just be careful not to overdrive it if you're using the class D amp breakouts as it can put 1.7W into the speaker, blowing it out! Start with lower volume and increase carefully...
  • Adafruit 977 Accessories TO-220 Clip-On Heatsink 1 Piece
    Precio:  $42,039.00
    Expira: 07/10/2023
    Agregar al Carrito   Vista

    Adafruit 977 Accessories TO-220 Clip-On Heatsink 1 Piece

    -Titulo Original : Adafruit Accessories TO-220 Clip-On Heatsink (1 Piece)-Fabricante : Adafruit-Descripcion Original: Get the most out of your regulators, transistors and other TO-220 packaged chips by clipping on a heat-sink. Your transistor or regulator may advertise it can handle high currents but when multiplied by the drop voltage, the Wattage may be too high for the bare chip! Most TO-220's can disipate about 2W's worth without a sink...
  • Adafruit Resistive Touch Screen to USB Mouse Controller - AR
    Precio:  $83,639.00
    Agregar al Carrito   Vista

    Adafruit Resistive Touch Screen to USB Mouse Controller - AR

    -Titulo Original : Adafruit Resistive Touch Screen to USB Mouse Controller - AR1100-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1580 // Stock Type: Breakout Boards >> Touch // In Stock & Ready to Ship // Getting touchy performance with your screen's touch screen? Resistive touch screens are incredibly popular as overlays to TFT and LCD displays. If you want to connect one to a computer you need something to handle the analog to digital conversion. Most converters we've found are not very easy to use, and are 'fixed' - making them difficult to calibrate. The AR1100 is a nice chip that solves this problem by acting as a touch->USB converter and also comes with calibration software. The calibration software is Windows only, but once you've calibrated you can use the screen on any OS. The AR1100 shows up as a regular Mouse or Digitizer HID device so no drivers are required. We've tested it sucessfully on Mac, Windows, and Debian Linux (Raspbian on a Raspberry Pi). Other Linux distributions may or may not work, but if you're running Linux you're probably used to that.This breakout board features the AR1100, which has both USB and UART interfaces available. 99% of the time, you'll want to use the USB interface but there is some functionality for getting TTL UART data out (see the datasheet for details) There is also a red LED that lights up to indicate when a touch has been detected. For the screens that have 1mm pitch FPC cables, you can plug the cable right into the connector. The majority of medium/large touchscreens have that kind of connector. If you have another kind of touch screen, the four X/Y contacts are available on 0.1 pitch breakouts so you can hand-solder or wire them. We set this breakout up for 4-wire sensing only. You can pretty much just plug and play to get started, for more details including calibration software, check out the AR1100 page . Plug any 1mm-pitch 4-wire resistive touchscreen to the on-board FPC connector, when you plug into a computer's USB port you should see a new device and touching the screen will cause the mouse cursor to move around...
  • Adafruit Colorful Square Tactile Button Switch Assortment -
    Precio:  $44,259.00
    Agregar al Carrito   Vista

    Adafruit Colorful Square Tactile Button Switch Assortment -

    -Titulo Original : Adafruit Colorful Square Tactile Button Switch Assortment - 15 Pack [ADA1010]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1010 // Stock Type: Components & Parts >> Switches // In Stock & Ready to Ship // Little clicky switches are standard input buttons on electronic projects. These work best in a PCB but can be used on a solderless breadboard as shown in this tutorial . The pins are normally open (disconnected) and when the button is pressed they are momentarily closed. These buttons are bigger than the 6mm ones we carry, and come in a pack of 15. Each button comes with a candy-colored square cap that snaps on. You get three of each color-- blue, grey, yellow, green, and red. The square plastic button tops affix easily to the tactile switch body...
  • Adafruit Flora Wearable Bluefruit LE Module [ADA2487]
    Precio:  $59,299.00
    Expira: 15/05/2021
    Agregar al Carrito   Vista

    Adafruit Flora Wearable Bluefruit LE Module [ADA2487]

    -Titulo Original : Adafruit Flora Wearable Bluefruit LE Module [ADA2487]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2487 // Stock Type: Wearables >> FLORA >> Boards // In Stock & Ready to Ship // Would you like to add powerful and easy-to-use Bluetooth Low Energy to your wearable FLORA project? Heck yeah! With BLE now included in modern smart phones and tablets, its fun to add wireless connectivity. So what you really need is the new Adafruit Flora Bluefruit LE!The Flora Bluefruit LE makes it easy to add Bluetooth Low Energy connectivity to your Flora. Sew 4 traces (or solder 4 wires) and BooM! Bluetooth Low Energy! Get started fast with the Bluefruit App! Using our Bluefruit  iOS App  or  Android App , you can quickly get your interactive project prototyped by using your iOS or Android phone/tablet as a controller. We have a  color picker , quaternion/accelerometer/gyro/magnetometer or location (GPS) , and an 8-button  control game pad . After you connect to the Bluefruit, you can send commands wirelessly in under 10 minutesFor advanced hackers, they'll be very happy to use the standard Nordic UART RX/TX connection profile. In this profile, the Bluefruit acts as a data pipe, that can 'transparently' transmit back and forth from your iOS or Android device. You can use our  iOS App  or  Android App , or write your own to communicate with the UART service . You can do a lot more too!   The Bluefruit can also act like an HID Keyboard  (for devices that support BLE HID) Can become a BLE Heart Rate Monitor  (a standard profile for BLE) - you just need to add the pulse-detection circuitry Turn it into a UriBeacon , the Google standard for Bluetooth LE beacons. Just power it and the Bluefruit will bleep out a URL to any nearby devices with the UriBeacon app installed. Built in over-the-air bootloading capability so we can keep you updated with the hottest new firmware . Use any Android or iOS device to get updates and install them! This is the same module and firmware as our BLE UART Friend &n...
  • Adafruit 3229 Radio FeatherWing - RFM69HCW 900MHz
    Precio:  $73,189.00
    Agregar al Carrito   Vista

    Adafruit 3229 Radio FeatherWing - RFM69HCW 900MHz

    -Titulo Original : Adafruit (PID 3229 Radio FeatherWing - RFM69HCW 900MHz-Fabricante : Adafruit-Descripcion Original: SX1231 based module with SPI interface // Packet radio with ready-to-go Arduino libraries // Uses the license-free ISM bands // +13 to +20 dBm up to 100 mW Power Output Capability (power output selectable in software) // 50mA (+13 dBm) to 150mA (+20dBm) current draw for transmissions // Add short-hop wireless to your Feather with these Radio Featherwings. These add-ons for any Feather board will let you integrate packetized radio (with the RFM69 radio) or LoRa radio (with the RFM9x's). These radios are good options for kilometer-range radio, and paired with one of our WiFi, cellular or Bluetooth Feathers, will let you bridge from 433/900 MHz to the Internet or your mobile device. These radio modules come in four variants (two modulation types and two frequencies) The RFM69's are easiest to work with, and are well known and understood. The LoRa radios are exciting, longer-range and more powerful but also more expensive. RFM69 @ 433 MHz - basic packetized FSK/GFSK/MSK/GMSK/OOK radio at 433 MHz for use in Europe ITU 1 license-free ISM, or for amateur use with restrictions (check your local amateur regulations!) RFM69 @ 900 MHz - basic packetized FSK/GFSK/MSK/GMSK/OOK radio at 868 or 915 MHz for use in Americas ITU 2 license-free ISM, or for amateur use with restrictions (check your amateur regulations!) RFM98 @ 433 MHz - LoRa capable radio at 433 MHz for use in Europe ITU 1 license-free ISM, or for amateur use with restrictions (check your local amateur regulations!) RFM95 @ 900 MHz - LoRa capable radio at 868 or 915 MHz for use in Americas ITU 2 license-free ISM, or for amateur use with restrictions (check your local amateur regulations!) This is the RFM69 @ 900 MHz version, it can be used for 868 MHz or 915 MHz (the radios use software configured frequency) These are +20dBm FSK packet radios that have a lot of nice extras in them such as encryption and auto-retransmit. They can go at least 500 meters line of sight using simple wire antennas, probably up to 5Km with directional antennas and settings tweaking...
  • Adafruit 2488 Metro 328 With Headers - ATmega328
    Precio:  $85,669.00
    Agregar al Carrito   Vista

    Adafruit 2488 Metro 328 With Headers - ATmega328

    -Titulo Original : Adafruit Metro 328 With Headers - ATmega328-Fabricante : Adafruit-Descripcion Original: Power the METRO with 7-9V polarity protected DC or the micro USB connector to any 5V USB source. The 2.1mm DC jack has an on/off switch next to it so you can turn off your setup easily. The METRO will automagically switch between USB and DC. // METRO has 19 GPIO pins, 6 of which are Analog in as well, and 2 of which are reserved for the USB-serial converter. There's also 6 PWMs available on 3 timers (1 x 16-bit, 2 x 8-bit). There's a hardware SPI port, hardware I2C port and hardware UART to USB. Logic level is 5V but by cutting and soldering closed a jumper, you can easily convert it to 3.3V logic // USB to Serial converter, there's a hardware USB to Serial converter that can be used by any computer to listen/send data to the METRO, and can also be used to launch and update code via the bootloader // Four indicator LEDs, on the front edge of the PCB, for easy debugging. One green power LED, two RX/TX LEDs for the UART, and a red LED connected to pin PB5 // Arduino IDE compatible, you can use this with the Arduino IDE (both desktop and cloud version) by selecting 'Arduino UNO' in the Boards menu. // We sure love the ATmega328 here at Adafruit, and we use them a lot for our own projects. The processor has plenty of GPIO, Analog inputs, hardware UART SPI and I2C, timers and PWM galore - just enough for most simple projects. When we need to go small, we use a Metro Mini or a Trinket M0, but when size isn't as much of a concern, we reach for an Adafruit METRO. This is the Adafruit METRO with headers. It comes with headers soldered on. It's a fully assembled and tested board with through-hole headers attached. If you don't want a Metro with the headers attached for super-slimness, check out our Metro without Headers. METRO is the culmination of years of playing with AVRs: we wanted to make a development board that is easy to use and is hacker friendly. At the heart is an ATmega328P, with 32KB of flash and 2KB of RAM, running at 16 MHz. It comes with the Optiboot bootloader already installed, and is Arduino IDE compatible...
  • Adafruit Flora Accelerometer/Compass Sensor - LSM303 [ADA124
    Precio:  $94,059.00
    Expira: 25/01/2021
    Agregar al Carrito   Vista

    Adafruit Flora Accelerometer/Compass Sensor - LSM303 [ADA124

    -Titulo Original : Adafruit Flora Accelerometer/Compass Sensor - LSM303 [ADA1247]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1247 // Stock Type: Wearables >> FLORA >> Boards // In Stock & Ready to Ship // Add motion and direction sensing to your wearable FLORA project with this high precision 3-axis Accelerometer+Compass sensor. Inside are two sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth (by measuring gravity) or how fast the board is accelerating in 3D space. The other is a magnetometer that can sense where the strongest magnetic force is coming from, generally used to detect magnetic north. By combining this data you can then orient yourself. We based this sensor on the latest version of this popular sensor, the LSM303DLHC. The sensor has a digital (I2C) interface. Attaching it to the FLORA is simple: line up the sensor so its adjacent to the SDA/SCL pins and sew conductive thread from the 3V, SDA, SCL and GND pins. They line up perfectly so you will not have any crossed lines. You can only connect one of these sensors to your FLORA, but you can connect other I2C sensors/outputs by using the set of SCL/SDA pins on the opposite side. Get started with the FLORA Accelerometer with our guide on the Adafruit Learning System ! It uses the same Arduino library as our conventional form LSM303 breakout. The example and library code will work 'out of the box' with FLORA. Simply download our library and connect the 3V/SCL/SDA/GND pins, install the library properly and upload our test program to read out accelerometer and magnetic field data. Flora Accelerometer/Compass Sensor - LSM303 ( 17:38 ...
  • Adafruit Mini Pan-Tilt Kit - Assembled with Micro Servos
    Precio:  $87,609.00
    Agregar al Carrito   Vista

    Adafruit Mini Pan-Tilt Kit - Assembled with Micro Servos

    -Titulo Original : Adafruit Mini Pan-Tilt Kit - Assembled with Micro Servos-Fabricante : ADAFRUIT-Descripcion Original: Service will take place at the customer's location // Removal of existing CPU from desktop // Installation of one customer-supplied CPU // Installing new drivers // Component test and cleanup // This fully-assembled pan-tilt kit is the perfect way to give your project full range motion with two micro servos. The pan-tilt can rotate roughly 180° from side-to-side and can tilt up&downwards around 150°. It also comes fully assembled with two Micro Servos (SG-90 or SG-92 type) included and a 38mm x 36mm space to mount a camera or sensor or whatever you like. Since the motors are plain, every-day analog servos, you can use any microcontroller or driver. They're good for beginners who want to make stuff move and the pan-tilt is an easy way to give whatever you're making both left-right and up-down motion. In our demo, we hooked this up with a Trinket Pro and made it do a little dance with the Arduino Servo library...
  • Adafruit 284 FTDI Friend Extras ADA284
    Precio:  $73,889.00
    Agregar al Carrito   Vista

    Adafruit 284 FTDI Friend Extras ADA284

    -Titulo Original : Adafruit FTDI Friend Extras [ADA284]-Fabricante : Adafruit-Descripcion Original: Long gone are the days of parallel ports and serial ports. Now the USB port reigns supreme! But USB is hard, and you just want to transfer your every-day serial data from a microcontroller to computer. What now? Enter the FTDI Friend! The FTDI Friend is a tweaked out FTDI FT232RL chip adapter. Sure, like the well-known FTDI cable, it can provide power to your project and there are 4 signal lines for sending data back and forth. But the Friend can do much more! For example, you can change the signal and power lines to be either 3.3V or 5V. Arduino-derivatives and XBees use the RTS line for programming but what if you need that DTR line? It's there for you. By default, it's setup so that it matches Adafruit's FTDI cables. The 6th pin is RTS (as of Arduino IDE v18 this will work perfectly for uploading to 'inos), the power wire is +5V and the signal levels are 3.3V. You can even rearrange the wire order with a 6-pin extension cable (not included). In a pinch, you can use it to program AVRs (its a bit slow but works!) Item Specifics Length: 38.07mm/1.5in Width: 17.89mm/0.7in Height: 7.7mm/0.31in Weight: 3.4g/0.12o...
Mostrar del 1 al 24 (de 177 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
Destacados
Revisar todos destacados

Información

Información

Nuestras ofertas

Nuestras ofertas

Su cuenta

Su cuenta

Mantente conectado

Mantente conectado

Contáctenos

Contáctenos

elbazardigital.com   © 2024