Arriba

Inicio » Catalogo » Electrónica, Audio y Video » Componentes Electrónicos > Semiconductores > Circuitos Integrados

Componentes Electrónicos > Semiconductores > Circuitos Integrados

Mostrar: 
Mostrar del 1 al 24 (de 178 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Adafruit Smt Breakout Pcb For Soic-16 Or Tssop-16 - 3 Pack
    Precio:  $58,479.00
    Agregar al Carrito   Vista

    Adafruit Smt Breakout Pcb For Soic-16 Or Tssop-16 - 3 Pack

    -Titulo Original : Adafruit SMT Breakout PCB for SOIC-16 or TSSOP-16 - 3 Pack! [ADA1207]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1207 // Stock Type: Prototyping >> SMT / SMD >> Breakout PCBs // In Stock & Ready to Ship // Beguiled by a fancy new chip that is only available in a SOIC or (T)SSOP pinout? This breakout PCB set will make your life much much easier and get you prototyping faster than ever. One side has a 16-TSSOP pin out with traces going to two rows of 0.1 spaced holes, the other has 16-SOIC. Solder your chip to either side and you're ready to rock on any solderless breadboard. Each item comes with three PCBs, each PCB is identical and can support either a SOIC (narrow, medium or wide variety) or TSSOP. Standard thickness PCBs, with 0.6 spacing between the two rows. You can of course use a smaller chip but the pin numbering wont be right so use care...
  • Adafruit Feather M4 Express - Featuring ATSAMD51 - ATSAMD51
    Precio:  $120,409.00
    Agregar al Carrito   Vista

    Adafruit Feather M4 Express - Featuring ATSAMD51 - ATSAMD51

    -Titulo Original : Adafruit Feather M4 Express - Featuring ATSAMD51 - ATSAMD51 Cortex M4-Fabricante : ADAFRUIT-Descripcion Original: 512KB Flash and 192KB RAM // ATSAMD51J19 // 120MHz Cortex M4 // It's what you've been waiting for, the Feather M4 Express featuring ATSAMD51. This Feather is fast like a swift, smart like an owl, strong like a ox-bird (it's half ox, half bird, OK?) This feather is powered by our new favorite chip, the ATSAMD51J19 - with its 120MHz Cortex M4 with floating point support and 512KB Flash and 192KB RAM. Your code will zig and zag and zoom, and with a bunch of extra peripherals for support, this will for sure be your favorite new chipset. And best of all, it's a Feather - so you know it will work with all our FeatherWings! What a great way to quickly get up and running. The most exciting part of the Feather M4 is that while you can use it with the Arduino IDE - and it's bonkers fast when you do, we are shipping it with CircuitPython on board. When you plug it in, it will show up as a very small disk drive with main.py on it. Edit main.py with your favorite text editor to build your project using Python, the most popular programming language. No installs, IDE or compiler needed, so you can use it on any computer, even ChromeBooks or computers you can't install software on. When you're done, unplug the Feather and your code will go with you. The Feather M4 Express uses the extra space left over to add a Mini NeoPixel, 2 MB SPI Flash storage and a little prototyping space. You can use the SPI Flash storage like a very tiny hard drive. When used in CircuitPython, the 2 MB flash acts as storage for all your scripts, libraries and files. When used in Arduino, you can read/write files to it, like a little datalogger or SD card, and then with our helper program, access the files over USB...
  • Adafruit Micro Lipo - USB LiIon/LiPoly Charger [ADA1304]
    Precio:  $42,889.00
    Agregar al Carrito   Vista

    Adafruit Micro Lipo - USB LiIon/LiPoly Charger [ADA1304]

    -Titulo Original : Adafruit Micro Lipo - USB LiIon/LiPoly Charger [ADA1304]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1304 // Stock Type: Power >> LiIon & LiPoly >> Chargers // In Stock & Ready to Ship // Oh so adorable, this is the tiniest little lipo charger, so handy you can keep it any project box! Its also easy to use. Simply plug in the gold plated contacts into any USB port and a 3.7V/4.2V lithium polymer or lithium ion rechargeable battery into the JST plug on the other end. There are two LEDs - one red and one green. While charging, the red LED is lit. When the battery is fully charged and ready for use, the green LED turns on. Seriously, it could not get more easy. Charging is performed in three stages: first a preconditioning charge, then a constant-current fast charge and finally a constant-voltage trickle charge to keep the battery topped-up. The charge current is 100mA by default, so it will work with any size battery and USB port. If you want you can easily change it over to 500mA mode by soldering closed the jumper on the back, for when you'll only be charging batteries with 500mAh size or larger. For use with Adafruit LiPoly/LiIon batteries only! Other batteries may have different voltage, chemistry, polarity or pinout.Comes assembled and tested with a free bonus JST cable!5V input via PCB-style USB connectorFor charging single Lithium Ion/Lithium Polymer 3.7/4.2v batteries (not for older 3.6/4.1v cells)100mA charge current, adjustable to 500mA by soldering a jumper closedFree 2-pin JST cable included!The MicroLipo charger can get hot during charging. Grab it by the sides and unplug then let cool before removing the battery - take care not to touch the components during charging! Batteries not included. Adafruit Micro Lipo - USB LiIon/LiPoly charger ( 18:22 ...
  • Adafruit 3258 Panel Mount Extension USB Cable - Micro B Male
    Precio:  $44,259.00
    Expira: 25/03/2023
    Agregar al Carrito   Vista

    Adafruit 3258 Panel Mount Extension USB Cable - Micro B Male

    -Titulo Original : Adafruit Panel Mount Extension USB Cable - Micro B Male To Micro B Female [ADA3258]-Fabricante : Adafruit-Descripcion Original: Interested in making neat stuff with an Arduino-compatible board but not sure where to start? This kit includes all the pieces needed to complete over 20 different circuit and projects. Basically everything you need to be playing within minutes of its arrival. No soldering required, works with Mac, Windows and Linux! This item is the same exact kit as https://www.adafruit.com/product/170 This pack includes the Adafruit Metro. METRO is the culmination of years of playing with AVRs: we wanted to make a development board that is easy to use and is hacker friendly. At the heart is an ATmega328P, with 32KB of flash and 2KB of RAM, running at 16 MHz. It is fully compatible with the Arduino IDE (select Arduino UNO in the board-type menu) Power the METRO with 7-9V polarity protected DC or the micro USB connector to any 5V USB source. The 2.1mm DC jack has an on/off switch next to it so you can turn off your setup easily. The METRO will automagically switch between USB and DC. METRO has 19 GPIO pins, 6 of which are Analog in as well, and 2 of which are reserved for the USB-serial converter. There's also 6 PWMs available on 3 timers (1 x 16-bit, 2 x 8-bit). There's a hardware SPI port, hardware I2C port and hardware UART to USB. Logic level is 5V but by cutting and soldering closed a jumper, you can easily convert it to 3.3V logic USB to Serial converter, there's a hardware USB to Serial converter that can be used by any computer to listen/send data to the METRO, and can also be used to launch and update code via the bootloader Four indicator LEDs, on the front edge of the PCB, for easy debugging. One green power LED, two RX/TX LEDs for the UART, and a red LED connected to pin PB5 Easy reprogramming, comes pre-loaded with the Optiboot bootloader, which is supported by avrdude and only uses 512 bytes. Fully compatible with the Arduino IDE (select Arduino UNO in the board-type menu) Works with all Adafruit shields...
  • Adafruit 1559 Flora RGB Smart NeoPixel Version 2 - Sheet Of
    Precio:  $113,309.00
    Agregar al Carrito   Vista

    Adafruit 1559 Flora RGB Smart NeoPixel Version 2 - Sheet Of

    -Titulo Original : Adafruit Flora RGB Smart NeoPixel Version 2 - Sheet Of 20-Fabricante : Adafruit-Descripcion Original: Designed specifically for wearables // Ultra-bright LEDs with a constant-current driver // Easy to sew and can be daisy-chained // Item Package Quantity: 1 //...
  • Adafruit Round Force-Sensitive Resistor (FSR) - Interlink 40
    Precio:  $38,439.00
    Expira: 12/10/2021
    Agregar al Carrito   Vista

    Adafruit Round Force-Sensitive Resistor (FSR) - Interlink 40

    -Titulo Original : Adafruit Round Force-Sensitive Resistor (FSR) - Interlink 402 [ADA166]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 166 // Stock Type: Sensors >> Touch // In Stock & Ready to Ship // FSRs are sensors that allow you to detect physical pressure, squeezing and weight. They are simple to use and low cost. This sensor is a Interlink model 402 FSR with 1/2 diameter sensing region.FSR's are basically a resistor that changes its resistive value (in ohms Ω) depending on how much its pressed. These sensors are fairly low cost, and easy to use but they're rarely accurate. They also vary some from sensor to sensor perhaps 10%. So basically when you use FSR's you should only expect to get ranges of response. While FSRs can detect weight, they're a bad choice for detecting exactly how many pounds of weight are on them.FSRs are made of plastic and the connection tab is crimped on delicate material. The best way to connect to these is to simply plug them into a breadboard or use a clamp-style connector like alligator clips, female header, or a terminal block. It is possible to solder onto the tabs but you must be very fast because if your iron is not good quality or you dally even a few seconds, you will melt the plastic and ruin the FSR! For a full tutorial with wiring diagrams, code examples and project ideas, please read the FSR tutorial page ...
  • Batería de polímero de litio Kbt 3.8v 2000mah 754444
    Precio:  $86,579.00
    Agregar al Carrito   Vista

    Batería de polímero de litio Kbt 3.8v 2000mah 754444

    -Titulo Original : KBT 3.8V 2000mAh Li-Polymer Battery: 754444 Lipo Rechargeable Lithium-ion Replacement Batteries With JST Connector-Fabricante : KBT KEEP BETTER TECH-Descripcion Original: - Batería de polímero de litio 754444: 3,8 V 2000 mAh, las baterías vienen con conector JST, muy cómodo de usar. Uso amplio: la batería se ajusta a cámaras digitales, tabletas, monitores domésticos, GPS, juguetes, Network Box, ventilador USB, probador, purificador de aire, controlador, altavoz bluetooth, monitor para bebés, teclado y mouse, etc. - Larga vida útil: con alrededor de 800 ciclos de carga y descarga, la batería puede funcionar durante 1-2 años en uso normal. Si no usa la batería con frecuencia, agote la capacidad de la batería y cárguela por completo una vez al mes. ...
  • Adafruit Stereo 20W Class D Audio Amplifier - MAX9744
    Precio:  $92,869.00
    Expira: 10/09/2021
    Agregar al Carrito   Vista

    Adafruit Stereo 20W Class D Audio Amplifier - MAX9744

    -Titulo Original : Stereo 20W Class D Audio Amplifier - MAX9744-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1752 // Stock Type: Halloween >> Accessories // In Stock & Ready to Ship // Color: Pump up the volume with this 20W stereo amplifier! This slim little board has a class D amplifier onboard that can drive 2 channels of 4-8 ohm impedance speakers at 20W each. Power it with 5-12VDC using the onboard DC power jack and plug stereo line level into the 3.5mm stereo headphone jack and jam out with ease. Since it's class D, its completely cool-running, no heat sinks are required and it's extremely efficient - up to 93% efficiency makes it great for portable or battery powered rigs. We like the MAX9744 amplifier at the heart of this board because its very easy to use, but it also has both analog and digital volume control capability. Use a single 1KΩ pot (we include one) to adjust volume analog-style. Or hook it up to your favorite microcontroller and send I2C commands to set 64-steps of volume amplification. Some great stats about the MAX9744:Power from 4.5V-14V DC voltageUp to 93% efficient (88-93% typical)20mA quiescent current (or put into shutdown for 1uA quiescent)Up to 29.5dB max gainUse DC or AC coupled line-level input, up to 3VppFilterless Spread-Spectrum Modulation Lowers Radiated RF Emissions from Speaker Cables20W Stereo Output (4Ω, VDD = 12V, THD+N = 10%)Low 0.04% THD+NIntegrated Click-and-Pop SuppressionShort-Circuit and Thermal-Overload ProtectionWe took this lovely chip and wrapped it up into a breakout for you, with polarity-protection, jacks and terminal blocks, i2c level shifting, and a spot to solder in a volume pot. Each order comes with one MAX9744 breakout board with all surface-mount parts fully assembled and tested. We also include 3 x 2pin and 1 x 3pin terminal blocks, a 470uF power filter capacitor and 1KΩ trim pot. To use this board, a little soldering is required to attach the terminal blocks and other components, but its fairly easy and expec...
  • Adafruit 2045 Si5351A Clock Generator Breakout Board - 8KHz
    Precio:  $50,289.00
    Expira: 18/11/2021
    Agregar al Carrito   Vista

    Adafruit 2045 Si5351A Clock Generator Breakout Board - 8KHz

    -Titulo Original : Adafruit Si5351A Clock Generator Breakout Board - 8KHz To 160MHz [ADA2045]-Fabricante : Adafruit-Descripcion Original: Si5351A clock generator (from 8KHz to 150+ MHz) // i2c interface // 3 independent outputs // Outputs are 3Vpp // Includes 3.3V LDO regulator and level shifting circuitry // Never hunt around for another crystal again, with the Si5351A clock generator breakout from Adafruit! This chip has a precision 25MHz crystal reference and internal PLL and dividers so it can generate just about any frequency, from...
  • Adafruit (3428 Reset/enable Controller - Ka75330 3.3v Volta
    Precio:  $23,689.00
    Expira: 21/10/2023
    Agregar al Carrito   Vista

    Adafruit (3428 Reset/enable Controller - Ka75330 3.3v Volta

    -Titulo Original : Adafruit (3428 Reset/Enable Controller - KA75330 3.3V Voltage Detector-Fabricante : ADAFRUIT-Descripcion Original: Product Dimensions: 19.0mm x 4.6mm x 3.5mm / 0.7" x 0.2" x 0.1" // Product Weight: 0.2g / 0.0oz // A voltage detector is handy for projects where you want to make sure your microcontroller doesn't run at a low voltage. For example, say you have a Feather Huzzah running on a lipoly battery every few minutes. Eventually the battery runs down, and goes below 3.3V, so the voltage to the ESP8266 core is too low, and could cause a lockup or corrupted data. Or maybe your battery is already drained and you're trying to charge it back up, but as you are trying to charge it up, the Huzzah turns on and the spike of current drains the battery immediately so it never gets through the trickle-charging stage. This little chip is a simple solution: It monitors the voltage on one Input pin, and when that voltage goes below 3.3V, it will pull the Output pin low. If you connect that Output pin to the Enable pin on the Feather, it will make sure that the Huzzah does not run if the battery dips too low. The KA75330 starts running at voltages as low as 0.8V so it'll be the first thing in your circuit that starts up. This little helper can really ease power start-up issues! Works best with microcontrollers and boards that have an Enable pin that is normally pulled high to enable function, and pulled to ground to disable...
  • Adafruit DS3231 Precision RTC FeatherWing - RTC Add-on For F
    Precio:  $46,349.00
    Agregar al Carrito   Vista

    Adafruit DS3231 Precision RTC FeatherWing - RTC Add-on For F

    -Titulo Original : Adafruit DS3231 Precision RTC FeatherWing - RTC Add-on For Feather Boards [ADA3028]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 3028 // Stock Type: Development Boards >> Feather >> Wings // In Stock & Ready to Ship // A Feather board without ambition is a Feather board without FeatherWings! This is the DS3231 Precision RTC FeatherWing : it adds an extremely accurate I2C-integrated Real Time Clock (RTC) with a Temperature Compensated Crystal Oscillator (TCXO)  to any Feather main board. This RTC is the most precise you can get in a small, low power package. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight! Check out our range of Feather boards here. Most RTCs use an external 32kHz timing crystal that is used to keep time with low current draw. And that's all well and good, but those crystals have slight drift, particularly when the temperature changes (the temperature changes the oscillation frequency very very very slightly but it does add up!) This RTC is in a beefy package because the crystal is inside the chip! And right next to the integrated crystal is a temperature sensor. That sensor compensates for the frequency changes by adding or removing clock ticks so that the timekeeping stays on schedule.With a CR1220 12mm coin cell plugged into the top of the FeatherWing, you can get years of precision timekeeping, even when main power is lost. Great for datalogging and clocks, or anything where you need to really know the time. A CR1220 coin cell is required to use the battery-backup capabilities! We don't include one by default, to make shipping easier for those abroad,  but we do stock them so pick one up or use any CR1220 you have handy. Our tutorial for the DS3231 breakout has all the library and example code you need to get started, works with any and all of our Feathers via the Arduino IDE Check out our range of Feather boards here...
  • Adafruit 2359 Raspberry Pi A Case - Smoke Base W/Clear Top
    Precio:  $44,939.00
    Agregar al Carrito   Vista

    Adafruit 2359 Raspberry Pi A Case - Smoke Base W/Clear Top

    -Titulo Original : Adafruit 2359 Raspberry Pi A Case - Smoke Base W/Clear Top-Fabricante : Adafruit-Descripcion Original: Case Dimensions (without lid): 73mm x 63mm x 26mm / 2.9" x 2.5" x 1" // Lid Thickness: 4mm / 0.2" // 39g // It took awhile to perfect - but that's okay since we can now safely say that the Adafruit case for Raspberry Pi Model A+ is The Single Greatest Raspberry Pi Model A+ Case Ever. This enclosure was designed by Mike Doell - just like our elegant, beautiful, and functional Pi Case for Raspberry Pi Model B+ / Pi 2. Made of ultra-durable, super-glossy polycarbonate, it is both good looking and tough enough to toss into your bookbag or toolbox. It has slim openings for all your cables, an easy-to-remove beveled slot for your Micro SD card, slots for both your Pi Camera and upcoming Display, and a space for your GPIO cable to extend out from the Pi. The Pi snaps into the base and the lid fits snugly onto the top. If you want to break out your Pi you can use your case without the lid and add hats to your A+ with ease. This is the basic, classic enclosure with a smoke base and a clear top. More colors are coming soon and we'll have packs to mix and match for ultimate Raspberry Pi A+ enclosure fun, but we'll be starting out with this very neutral gray/clear combo. This case works for the Raspberry Pi Model A+ only. It does not work for the Raspberry Pi Model A, B, B+, or Pi 2. It does work with the model A+ but there will be a bit of empty space of course, and you'll need to snake your USB cable or connector through the front holes which may not work if the cable is bulky No Pi, cables, or Pi Camera included. This product is just the case...
  • Adafruit FeatherWing OLED - 128x32 OLED Add-on for All Feath
    Precio:  $81,299.00
    Expira: 06/03/2023
    Agregar al Carrito   Vista

    Adafruit FeatherWing OLED - 128x32 OLED Add-on for All Feath

    -Titulo Original : Adafruit FeatherWing OLED - 128x32 OLED Add-on for All Feather Boards [ADA2900]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2900 // Stock Type: Development Boards >> Feather >> Wings // In Stock & Ready to Ship // A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing OLED : it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight!These displays are small, only about 1 diagonal, but very readable due to the high contrast of an OLED display. This screen is made of 128x32 individual white OLED pixels and because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its crispness! We also toss on a reset button and three mini tactile buttons called A B and C so you can add a mini user interface to your feather.Tested working with  all Feather boards. The OLED uses only the two I2C pins on the Feather, and you can pretty much stack it with any other FeatherWing, even ones that use I2C since that is a shared bus. To use, Check out our tutorial ! It has schematics, datasheets, files, and code examples. Check out our range of Feather boards here...
  • Adafruit 3505 Metro M0 Express - Designed For CircuitPython
    Precio:  $116,439.00
    Agregar al Carrito   Vista

    Adafruit 3505 Metro M0 Express - Designed For CircuitPython

    -Titulo Original : Adafruit (PID 3505 Metro M0 Express - Designed For CircuitPython - ATSAMD21G18-Fabricante : Adafruit-Descripcion Original: ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero. This chip has a whopping 256K of FLASH (8x more than the Atmega328) and 32K of RAM (16x as much)! // This chip comes with built in USB so it has USB-to-Serial program & debug capability built in with no need for an FTDI-like chip. // Power the METRO with 7-9V polarity protected DC or the micro USB connector to any 5V USB source. The 2.1mm DC jack has an on/off switch next to it so you can turn off your setup easily. The METRO will automagically switch between USB and DC. // METRO has 25 GPIO pins, 12 of which are analog in, and one of which is a true analog out. There's a hardware SPI port, hardware I2C port and hardware UART. Logic level is 3.3V // Easy reprogramming, comes pre-loaded with the UF2 bootloader, which looks like a USB storage key. Simply drag firmware on to program, no special tools or drivers needed! It can be used to load up CircuitPython, PXT MakeCode or Arduino IDE (it is bossa-compatible) // Metro is our series of microcontroller boards for use with the Arduino IDE. This new Metro M0 Express board looks a whole lot like our original Metro 328, but with a huge upgrade. Instead of the ATmega328, this Metro features a ATSAMD21G18 chip, an ARM Cortex M0+. It's our first Metro that is designed for use with CircuitPython! CircuitPython is our beginner-oriented flavor of MicroPython - and as the name hints at, its a small but full-featured version of the popular Python programming language specifically for use with circuitry and electronics. Not only can you use CircuitPython, but the Metro M0 is also usable in the Arduino IDE. Native USB, there's no need for a hardware USB to Serial converter as the Metro M0 has built in USB support. When used to act like a serial device, the USB interface can be used by any computer to listen/send data to the METRO, and can also be used to launch and update code via the bootloader. It can also act like a keyboard, mouse or MIDI device as well. Four indicator LEDs and one NeoPixel, on the front edge of the PCB, for easy debugging. One green power LED, two RX/TX LEDs for data being sent over USB, and a red LED connected. Next to the reset button there is an RGB NeoPixel that can be used for any purpose. 2 MB SPI Flash storage chip is included on board. You can use the SPI Flash storage like a very tiny hard drive. When used in Circuit Python, the 2 MB flash acts as storage for all your scripts, libraries and files. When used in Arduino, you can read/write files to it, like a little datalogger or SD card, and then with our helper program, access the files over USB. Comes fully assembled with headers, tested, and with the UF2 bootloader loaded on. We also include 4 rubber bumpers to keep it from slipping off your desk. No soldering required to use, plug and play...
  • Adafruit MicroSD Socket [ADA1660]
    Precio:  $38,309.00
    Expira: 14/02/2024
    Agregar al Carrito   Vista

    Adafruit MicroSD Socket [ADA1660]

    -Titulo Original : Adafruit MicroSD Socket [ADA1660]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1660 // Stock Type: Components & Parts >> Sockets/Connectors // In Stock & Ready to Ship // Add tons of storage to your next project with this micro SD card socket. We use this part in all our designs and it works great with any microSD ('transflash') of any storage size. It's a surface-mount part and the pins are underneath so it needs a fine tip and paste or thin solder to get in there and solder, not for beginners! It is a push-push type: push the card in to insert, push again to spring it out. You can get the EAGLE component for this in our EagleCAD library, its called (surprise!) MICROSD MicroSD Socket ( 29:20 ...
  • Adafruit Mini Metal Speaker w/ Wires - 8 ohm 0.5W [ADA1890]
    Precio:  $30,649.00
    Expira: 17/06/2021
    Agregar al Carrito   Vista

    Adafruit Mini Metal Speaker w/ Wires - 8 ohm 0.5W [ADA1890]

    -Titulo Original : Adafruit Mini Metal Speaker w/ Wires - 8 ohm 0.5W [ADA1890]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1890 // Stock Type: Components & Parts >> Speakers // In Stock & Ready to Ship // Listen up! This tiny 1 diameter speaker cone is the perfect addition to any small audio project where you need an 8 Ω impedance and will be using 0.5W or less of power. We particularly like this cone as it's very simple and its metal body is extremely lightweight. It's very similar to the speaker in the Drawdio kit. Works great with our Wave shield or class D amplifier board . Just be careful not to overdrive it if you're using the class D amp breakouts as it can put 1.7W into the speaker, blowing it out! Start with lower volume and increase carefully...
  • Adafruit USB Micro-B Breakout Board [ADA1833]
    Precio:  $29,839.00
    Expira: 26/03/2022
    Agregar al Carrito   Vista

    Adafruit USB Micro-B Breakout Board [ADA1833]

    -Titulo Original : Adafruit USB Micro-B Breakout Board [ADA1833]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1833 // Stock Type: Breakout Boards >> Batteries/Power // In Stock & Ready to Ship // Simple but effective - this breakout board has a USB Micro-B connector, with all 5 pins broken out. Great for pairing with a microcontroller with USB support, or adding USB 5V power to a project. We use a micro-AB connector with through-hole shielding pads for an excellent strong connection - it won't rip off by accident! Comes with one fully assembled and tested micro B breakout PCB and a small stick of 0.1 header so you can solder it on and plug into a breadboard...
  • Adafruit 3296 DS1307 Real Time Clock Breakout Board
    Precio:  $45,869.00
    Agregar al Carrito   Vista

    Adafruit 3296 DS1307 Real Time Clock Breakout Board

    -Titulo Original : Adafruit 3296 DS1307 Real Time Clock Breakout Board-Fabricante : Adafruit-Descripcion Original: DS1307 Real Time Clock Breakout Board This real time clock (RTC) with battery backup allows your microcontroller project to keep track of time even if it's reprogrammed or if the power is lost. It's perfect for data logging, clock-building, time stamping, timers, alarms, and more. The DS1307 is the most popular RTC but it requires 5V power to work (although we've used it with 5V power and 3.3V logic successfully). The DS1307 is simple and inexpensive but not a high precision device. It may lose or gain up to 2 seconds a day. For a high-precision, temperature compensated alternative, take a look at the DS3231 precision RTC . It works great with an Arduino using our RTC library or with a Raspberry Pi (or similar single board linux computer) . Note: This product does not come with a CR1220 coin cell battery. We recommend you purchase a CR1220 coin cell battery to use with this product. Features PCB & header are included Plugs into any breadboard, or you can use wires Two mounting holes Will keep time for 5 years or more Specifications Length: 25.8mm/1.02in Width: 21.7mm/0.85in Height: 5mm/0.2in Weight: 2.3g/0.09oz Mounting holes are 2.2mm(0.086in) diameter, 25mm(0.98in) apart This board/chip uses I²C 7-bit address 0x68 . Made in China...
  • Adafruit Thermal Interface Products Heat Sink Thermal Tape -
    Precio:  $37,559.00
    Expira: 13/02/2021
    Agregar al Carrito   Vista

    Adafruit Thermal Interface Products Heat Sink Thermal Tape -

    -Titulo Original : Thermal Interface Products Heat Sink Thermal Tape - 3M 8810 - 80mm x 80mm (1 piece)-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1468 // Stock Type: Components & Parts >> Heat Sinks // In Stock & Ready to Ship // Get that heat sink stuck on good and strong with 3M's thermal tape. Specifically designed for attaching heat sinks to ICs. Works better and is less messy than thermal glues or pastes because the thickness is even across the area. A perfect match for our range of small heat sinks, either in aluminum or copper. Comes in a square of 80mm x 80mm (3 square) - but can be cut into any shape or size. For more information about 3M's 8810 thermal tape check out the datasheet Heat Sink Thermal Tape - 3M 8810 - 80mm x 80mm ( 0:13 ...
  • Adafruit TB6612 1.2A DC/Stepper Motor Driver Breakout Board
    Precio:  $54,259.00
    Agregar al Carrito   Vista

    Adafruit TB6612 1.2A DC/Stepper Motor Driver Breakout Board

    -Titulo Original : Adafruit TB6612 1.2A DC/Stepper Motor Driver Breakout Board-Fabricante : ADAFRUIT-Descripcion Original: TB6612 motor driver // 1.2A per channel // Runs at 2.7V-5V logic. The motor voltage is separate from the logic voltage. Good for motor voltages from 4.5V up to 13.5V // Dimensions: 27mm x 19mm x 3mm / 1.1" x 0.7" x 0.1" // Weight: 1.8g // Spin two DC motors, step one bi-polar or uni-polar stepper, or fire off two solenoids with 1.2A per channel using the TB6612. These are perhaps better known as the drivers in our assembled Adafruit Motorshield or Motor HAT. We really like these dual H-bridges, so if you want to control motors without a shield or HAT these are easy to include on any solderless breadboard or perma-proto. We solder on TB6612 onto a breakout board for you here, with a polarity protection FET on the motor voltage input and a pullup on the standby enable pin. Each breakout chip contains two full H-bridges (four half H-bridges). That means you can drive 2-4 solenoids (only two can be active at a time, on opposite bridges), two DC motors bi-directionally, or one stepper motor. Just make sure they're good for 1.2 Amp or less of current, since that's the limit of this chip. They do handle a peak of 3A but that's just for a short amount of time, like 20 milliseconds. What we like most about this particular driver is that it comes with built in kick-back diodes internally so you dont have to worry about the inductive kick damaging your project or driver! There's two digital inputs per H-bridge (one for each half of the bridge) as well as a PWM input per driver so you can control motor speed. Runs at 2.7V-5V logic. The motor voltage is separate from the logic voltage. Good for motor voltages from 4.5V up to 13.5V! This wont work well for 3V motors. Comes as one assembled and tested breakout plus a small strip of header. You'll need to do some light soldering to attach the header onto the breakout PCB. Arduino, motors, and power supply not included. Check out our handy tutorial on assembly and wiring...
  • Adafruit 4 x AA Battery Holder with On/Off Switch
    Precio:  $36,189.00
    Expira: 13/11/2020
    Agregar al Carrito   Vista

    Adafruit 4 x AA Battery Holder with On/Off Switch

    -Titulo Original : Adafruit 4 x AA Battery Holder with On/Off Switch-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 830 // Stock Type: Power >> Battery Holders>> AA // In Stock & Ready to Ship // Make a nice portable power pack with this 4 x AA battery holder. It fits any alkaline or rechargeable AA batteries in series. There's a snap on cover and an on/off switch which can be handy when wiring to something without a switch. The four batteries are held in series, for a nominal output of 6V DC for alkaline (6.4V when fresh, 4V when dead), and 4.8V DC for rechargeables (5.2V when fully charged, 4.4V when discharged). Using rechargeables will make this work nicely with nearly any 5V project, with alkalines you may want to put a 1N4001 in series to drop the voltage from 6V down to 5.3V...
  • Adafruit 2881 A/V And RCA Composite Video, Audio Cable For R
    Precio:  $46,109.00
    Agregar al Carrito   Vista

    Adafruit 2881 A/V And RCA Composite Video, Audio Cable For R

    -Titulo Original : Adafruit A/V And RCA (Composite Video, Audio) Cable For Raspberry Pi [ADA2881]-Fabricante : Adafruit-Descripcion Original: Description this a/v rca cable for raspberry pi is a great way to turn your pi 3, 2, a+ or b+'s output into a fullposite video and audio device. Simply connect the cable to your raspberry pi's 3. 5mm jack and the other side into whatever device you're looking to connect to and get full rca visuals and sound. We're big fans of rca connectors. They're one of our favorite plugs that everyone has a fond memory of using. Yellow'sposite video while red and white are for stereo audio. The cable is around 5 feet long. This cable has the right wiring so you canposite video out - e. G. The trrs corresponds to left, right, ground, video...
  • Adafruit EL Wire 2xAA Pocket Inverter [ADA317]
    Precio:  $54,389.00
    Agregar al Carrito   Vista

    Adafruit EL Wire 2xAA Pocket Inverter [ADA317]

    -Titulo Original : Adafruit EL Wire 2xAA Pocket Inverter [ADA317]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 317 // Stock Type: EL Wire/Tape/Panel >> Inverters/Power Connectors // In Stock & Ready to Ship // A small, portable inverter for EL wire. Powers off of 2 AA batteries (not included!), it can drive 1 to 8 feet (about 2.5m) of our high-brightness EL wire for 10 hours. There is a button for selecting steady/blink/off modes. There's a removable clip on the back. Comes with a 2.5mm pitch female JST connectorTo connect a piece EL wire to this, you'll want a male connector wire The EL inverter requires a 'load' to stabilize itself. Otherwise the inverter can spike and damage itselfLike all inverters we've used, the 2000 Hz oscillation is slightly audible. To reduce the squeaking, we suggest opening up the case padding it with thick foam tape/weatherstripping . Squirting some hot glue around the capacitors may also help. We managed to get it silent this way. We used this to make our awesome TRON bag  Soldering to EL wire is a little tricky but luckily we wrote a detailed step-by-step tutorial...
  • Adafruit Trellis Monochrome Driver Pcb For 4x4 Keypad & 3mm
    Precio:  $73,849.00
    Agregar al Carrito   Vista

    Adafruit Trellis Monochrome Driver Pcb For 4x4 Keypad & 3mm

    -Titulo Original : Adafruit Trellis Monochrome Driver PCB for 4x4 Keypad & 3mm LEDs-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1616 // Stock Type: Components & Parts >> Switches // In Stock & Ready to Ship // This item is just for the Trellis driver PCB assembly: LEDs and buttons not included. Trellis is an open source backlight keypad driver system. It is easy to use, works with any 3mm LEDs and eight tiles can be tiled together on a shared I2C bus. This PCB is specially made to match the Adafruit 4x4 elastomer keypad. Each Trellis PCB has 4x4 pads and 4x4 matching spots for 3mm LEDs. The circuitry on-board handles the background key-presses and LED lighting for the 4x4 tile. However, it does not have any microcontroller or other 'brains' - an Arduino (or similar microcontroller) is required to control the Trellis to read the keypress data and let it know when to light up LEDs as desired. Each tile has an I2C-controlled LED sequencer and keypad reader already on it. The chip can control all 16 LEDs individually, turning them on or off. It cannot do grayscale or dimming. The same chip also reads any keypresses made with the rubber keypad. The connections are 'diode multiplexed' so you do not have to worry about ghosting when pressing multiple keys, each key is uniquely addressed. The tiles have 3 address jumpers. You can tile up to 8 PCBs together (for a total of 4x32 or 16x8=128 buttons/leds) on a single I2C bus, as long as each one has a unique address. All the tiles connect by the edges with solder, and share the same power, ground, interrupt, and i2c clock/data pins. So, you can easily set up to 128 LEDs and read up to 128 buttons using only 2 I2C wires! The tiles can be arranged in any configuration they want as long as each tile is connected to another with the 5 edge-fingers. Each LED is multiplexed with a constant-current driver, so you can mix and match any colors you like. You don't need it to be all blue, all red, etc. Mix it up! Any 3mm LED can be used, although we find that diffused LEDs with 250mcd+ brightness look best. This item is just for the Trellis ...
Mostrar del 1 al 24 (de 178 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
Destacados
Revisar todos destacados

Información

Información

Nuestras ofertas

Nuestras ofertas

Su cuenta

Su cuenta

Mantente conectado

Mantente conectado

Contáctenos

Contáctenos

elbazardigital.com   © 2024