-Titulo Original : QWinOut 2-4S 30A RC Brushless ESC Simonk Firmware Electric Speed Controller with 5V 3A BEC with 3.5mm Female Banana Bullet for 2 to 4s Lipo Battery, DIY Multicopter Quadcopter (30A, 4 pcs)-Fabricante : QWinOut-Descripcion Original: NOTE: 1. Since 2020.07.05, this items was soldered with 3.5mm Female banana connectors, effectively avoid welding problems; 2. We have set up the program, the ESC do not need additional program // Input voltage:2-4 S; BEC: 5V 3A; Working current: 30A / 40A (Optional on my shop) // Universal SimonK Firmware 30A/40A ESC Brushless Speed Controller, super simple. Small size combined with light weight for easy installation. (30A/40A is optional on my shop) // Military standard capacitor of extreme low resistance increases the ability of prevention of unwanted RF noise during flying. Extreme low resistance PCB is helpful for getting a super current endurance capability. // Microprocessor uses separate voltage regulator IC, with good anti-jamming capability. // Color: Brand: QWinOut Working current: 30A/40A Output: 30A Version: Continuous 25A, Burst 40A up to 10 Secs 40A Version: Continuous 40A, Burst 55A not down to 10 Secs Input Voltage:2-4 cells lithium battery or 5-12 cells NiCd/NIMh battery BEC:5V 3A Max Speed:210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.(BLM: BrushLess Motor) Weight:about 25g Compatible for: DIY FPV KK MK MWC RC Quadcopter Hexacopter Multi-Rotor Aircraft; 210 360 450 Helicopter; 380 f450 f550 and other four-axis six-axis fixed-wing drone. Features 1.Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected. 2.Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters. 3.Programmable Items:Brake Setting:brake enabled/brake disabled. Battery Type:Li-xx(Li-ion or LiPo)/Ni-xx(NiMh or NiCd). Low Voltage Protection Mode(Cutoff Mode):Gradually reduce the output power/Cutoff the output power. Low Voltage Cutoff Protection Threshold (Cutoff Threshold):low/medium/high. Start Mode: normal/soft/very soft. Timing:low/medium/high. Reset: reset all the programmable items to their default settings. 4.Full Protection Features: Low voltage cutoff protection/Over-heat protection/Throttle signal lost protection. 1.Connect ESC/motor/receiver 2.Push the remote control throttle to maximum 3.Connect power 4.Hear the regular sound of D- D- D……, unplug battery 5.Reconnect power and hear DD quickly sound 6.Pull the throttle to minimum 7.D sound once, calibration successfu...

-Titulo Original : QWinOut A2212 1400KV Brushless Outrunner Motor with Mount 10T for RC Aircraft/KKmulticopter 4/6 Axle Quadcopter UFO (4 Pcs)-Fabricante : QWinOut-Descripcion Original: Brushless motor // 2212 1400KV motor // for RC Aircraft / KKmulticopter 4-Axle/6-AXle Quadcopter UFO // Already solded with 3.5mm Male banana connectors, effectively avoid welding problems // Edition: Brand: QWinOut KV: 1400 Max Efficiency: 80% Max Efficiency Current: 4-10A (>75%) Current Capacity: 12A/60s No Load Current @ 10V: 0.5A No. Of Cells: 2-3 Li-Poly Motor Dimensions: ?27.5 x 30mm Shaft Diameter: ?3.17mm Weight: 47g Including: 1 /4/6 set * 2212 1400KV Brushless Outrunner Motor with Mount...

-Titulo Original : QWinOut 2-4S 30A RC Brushless ESC Simonk Firmware Electric Speed Controller with 5V 3A BEC with 3.5mm Female Banana Bullet for 2 to 4s Lipo Battery, DIY Multicopter Quadcopter (30A,1 pcs)-Fabricante : QWinOut-Descripcion Original: NOTE: 1. Since 2020.07.05, this items was soldered with 3.5mm Female banana connectors, effectively avoid welding problems; 2. We have set up the program, the ESC do not need additional program // Input voltage:2-4 S; BEC: 5V 3A; Working current: 30A / 40A (Optional on my shop) // Universal SimonK Firmware 30A/40A ESC Brushless Speed Controller, super simple. Small size combined with light weight for easy installation. (30A/40A is optional on my shop) // Military standard capacitor of extreme low resistance increases the ability of prevention of unwanted RF noise during flying. Extreme low resistance PCB is helpful for getting a super current endurance capability. // Microprocessor uses separate voltage regulator IC, with good anti-jamming capability. // Color: Brand: QWinOut Working current: 30A/40A Output: 30A Version: Continuous 25A, Burst 40A up to 10 Secs 40A Version: Continuous 40A, Burst 55A not down to 10 Secs Input Voltage:2-4 cells lithium battery or 5-12 cells NiCd/NIMh battery BEC:5V 3A Max Speed:210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.(BLM: BrushLess Motor) Weight:about 25g Compatible for: DIY FPV KK MK MWC RC Quadcopter Hexacopter Multi-Rotor Aircraft; 210 360 450 Helicopter; 380 f450 f550 and other four-axis six-axis fixed-wing drone. Features 1.Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected. 2.Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters. 3.Programmable Items:Brake Setting:brake enabled/brake disabled. Battery Type:Li-xx(Li-ion or LiPo)/Ni-xx(NiMh or NiCd). Low Voltage Protection Mode(Cutoff Mode):Gradually reduce the output power/Cutoff the output power. Low Voltage Cutoff Protection Threshold (Cutoff Threshold):low/medium/high. Start Mode: normal/soft/very soft. Timing:low/medium/high. Reset: reset all the programmable items to their default settings. 4.Full Protection Features: Low voltage cutoff protection/Over-heat protection/Throttle signal lost protection. 1.Connect ESC/motor/receiver 2.Push the remote control throttle to maximum 3.Connect power 4.Hear the regular sound of D- D- D……, unplug battery 5.Reconnect power and hear DD quickly sound 6.Pull the throttle to minimum 7.D sound once, calibration successfu...

-Titulo Original : QWinOut 2-4S 30A RC Brushless ESC Simonk Firmware Electric Speed Controller with 5V 3A BEC with 3.5mm Female Banana Bullet for 2 to 4s Lipo Battery, DIY Multicopter Quadcopter (30A, 6 pcs)-Fabricante : QWinOut-Descripcion Original: NOTE: 1. Since 2020.07.05, this items was soldered with 3.5mm Female banana connectors, effectively avoid welding problems; 2. We have set up the program, the ESC do not need additional program // Input voltage:2-4 S; BEC: 5V 3A; Working current: 30A / 40A (Optional on my shop) // Universal SimonK Firmware 30A/40A ESC Brushless Speed Controller, super simple. Small size combined with light weight for easy installation. (30A/40A is optional on my shop) // Military standard capacitor of extreme low resistance increases the ability of prevention of unwanted RF noise during flying. Extreme low resistance PCB is helpful for getting a super current endurance capability. // Microprocessor uses separate voltage regulator IC, with good anti-jamming capability. // Color: Brand: QWinOut Working current: 30A/40A Output: 30A Version: Continuous 25A, Burst 40A up to 10 Secs 40A Version: Continuous 40A, Burst 55A not down to 10 Secs Input Voltage:2-4 cells lithium battery or 5-12 cells NiCd/NIMh battery BEC:5V 3A Max Speed:210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.(BLM: BrushLess Motor) Weight:about 25g Compatible for: DIY FPV KK MK MWC RC Quadcopter Hexacopter Multi-Rotor Aircraft; 210 360 450 Helicopter; 380 f450 f550 and other four-axis six-axis fixed-wing drone. Features 1.Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected. 2.Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters. 3.Programmable Items:Brake Setting:brake enabled/brake disabled. Battery Type:Li-xx(Li-ion or LiPo)/Ni-xx(NiMh or NiCd). Low Voltage Protection Mode(Cutoff Mode):Gradually reduce the output power/Cutoff the output power. Low Voltage Cutoff Protection Threshold (Cutoff Threshold):low/medium/high. Start Mode: normal/soft/very soft. Timing:low/medium/high. Reset: reset all the programmable items to their default settings. 4.Full Protection Features: Low voltage cutoff protection/Over-heat protection/Throttle signal lost protection. 1.Connect ESC/motor/receiver 2.Push the remote control throttle to maximum 3.Connect power 4.Hear the regular sound of D- D- D……, unplug battery 5.Reconnect power and hear DD quickly sound 6.Pull the throttle to minimum 7.D sound once, calibration successfu...

-Titulo Original : QWinOut A2212 1400KV Brushless Outrunner Motor with Mount 10T for RC Aircraft/KKmulticopter 4/6 Axle Quadcopter UFO (6 Pcs)-Fabricante : QWinOut-Descripcion Original: Brushless motor // 2212 1400KV motor // for RC Aircraft / KKmulticopter 4-Axle/6-AXle Quadcopter UFO // Already solded with 3.5mm Male banana connectors, effectively avoid welding problems // Edition: Brand: QWinOut KV: 1400 Max Efficiency: 80% Max Efficiency Current: 4-10A (>75%) Current Capacity: 12A/60s No Load Current @ 10V: 0.5A No. Of Cells: 2-3 Li-Poly Motor Dimensions: ?27.5 x 30mm Shaft Diameter: ?3.17mm Weight: 47g Including: 1 /4/6 set * 2212 1400KV Brushless Outrunner Motor with Mount...

-Titulo Original : QWinOut 2-4S 30A/40A RC Brushless ESC Simonk Firmware Electric Speed Controller with 5V 3A BEC with 3.5mm Female Banana Bullet for 2 to 4s Lipo Battery, DIY Multicopter Quadcopter (40A, 4 pcs)-Fabricante : QWinOut-Descripcion Original: NOTE: 1. Since 2020.07.05, this items was soldered with 3.5mm Female banana connectors, effectively avoid welding problems; 2. We have set up the program, the ESC do not need additional program // Input voltage:2-4 S; BEC: 5V 3A; Working current: 30A / 40A (Optional on my shop) // Universal SimonK Firmware 30A/40A ESC Brushless Speed Controller, super simple. Small size combined with light weight for easy installation. (30A/40A is optional on my shop) // Military standard capacitor of extreme low resistance increases the ability of prevention of unwanted RF noise during flying. Extreme low resistance PCB is helpful for getting a super current endurance capability. // Microprocessor uses separate voltage regulator IC, with good anti-jamming capability. // Color: Brand: QWinOut Working current: 30A/40A Output: 30A Version: Continuous 25A, Burst 40A up to 10 Secs 40A Version: Continuous 40A, Burst 55A not down to 10 Secs Input Voltage:2-4 cells lithium battery or 5-12 cells NiCd/NIMh battery BEC:5V 3A Max Speed:210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.(BLM: BrushLess Motor) Weight:about 25g Compatible for: DIY FPV KK MK MWC RC Quadcopter Hexacopter Multi-Rotor Aircraft; 210 360 450 Helicopter; 380 f450 f550 and other four-axis six-axis fixed-wing drone. Features 1.Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected. 2.Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters. 3.Programmable Items:Brake Setting:brake enabled/brake disabled. Battery Type:Li-xx(Li-ion or LiPo)/Ni-xx(NiMh or NiCd). Low Voltage Protection Mode(Cutoff Mode):Gradually reduce the output power/Cutoff the output power. Low Voltage Cutoff Protection Threshold (Cutoff Threshold):low/medium/high. Start Mode: normal/soft/very soft. Timing:low/medium/high. Reset: reset all the programmable items to their default settings. 4.Full Protection Features: Low voltage cutoff protection/Over-heat protection/Throttle signal lost protection. 1.Connect ESC/motor/receiver 2.Push the remote control throttle to maximum 3.Connect power 4.Hear the regular sound of D- D- D……, unplug battery 5.Reconnect power and hear DD quickly sound 6.Pull the throttle to minimum 7.D sound once, calibration successfu...