-Titulo Original : GARTT 4PCS ML2206S 2400KV 2CW 2CCW Brushless Motor 3S-4S for RC FPV Drones QAV 210 250 300 Mini Quadcopter Multicopter-Fabricante : GARTT-Descripcion Original: Cooling Series Bell Design reduces motor temperature by at least 20%. // Highest Grade n50sh Neodymium magnets, Genuine Japanese NMB Bearings. // Each Motor is Dynamically Balanced in the factory. // 12.5mm Extended Prop Shaft allows virtually any prop with 5mm hole. // 1 year warranty and friendly customer service. // Motor KV:2400 RPM/V Motor Resistance (RM):0.0586 ? Idle Current (Io/10V):0.9A/10V Max Continuous Current:27A/60s Max Continuous Power:430W/60s Weight:?30g/1.06 oz Lipo Cell:3S?4S Motor Diameter:28mm/1.1 in Motor Body Length:31mm/1.22 in Configu-ration:12N14P Bolt holes spacing:16mm/0.63in/19mm/0.75in Bolt thread:M3×5 2PCS ML2206S 2400KV CW Brushless Motor 2PCS ML2206S 2400KV CCW Brushless Motor When using the screws we provide, pay attention to the thickness of the motor mounting plate. If the mounting plate is too thin, it may cause the screws to be too long to be pushed up to the motor coil...

-Titulo Original : GARTT ML5010 300KV Brushless Motor for Multirotor Quadcopter Multi-Copter-Fabricante : GARTT-Descripcion Original: High magnetic energy ndfeb magnet steel-n45sh with 150 degrees heat-resistant. // To support the high speed(up to 15000 spin), we used the imported japanese nmb bearing and hrc55 degrees stainless steel axis. // Using the heat-resistant varnished wire enwinding the motor coil, 600mm weld wire(extra-soft silicone wire) can be cut optionally. // Each rotor was balanced with high speed,ensure the motor high-speed runnung without shake. // The vane-type design can reduce motor temperature with a big cloud of steam. // Specifications: Motor KV: 300KV RPM/V Motor Resistance (RM): 0.0946 ? Idle Current (Io/10V): 0.3A/10V Max Continuous Current: 36A Max Continuous Power: 850W Weight: ?193g/6.81oz Lipo Cell: 6S?8S Motor Diameter: 58.8mm/2.3in Motor Body Length: 27mm/1.06in Configu-ration: 12N14P Overall Shaft Length: 33.5mm/1.32in Shaft Diameter: 4.0mm/0.157in Bolt holes spacing: 25mm/0.98in Bolt thread: M3×6 Package include: ML5010 300KV brushless motor *1 When using the screws we provide, pay attention to the thickness of the motor mounting plate. If the mounting plate is too thin, it may cause the screws to be too long to be pushed up to the motor coil...