-Titulo Original : 6 Pack 3 Pack Big DIY Planter Pot Mold, Hexagon, Cube And Cylinder Resin Mold, 3 Pack Coaster Silicone Mold, Round, Square, Hexagon, Square Silicone Molds, DIY Flower Pot Molds, Pen Holder Molds-Fabricante : VTurboWay-Descripcion Original: Material: Silicone. Silicone Is Flexible, Resistant To Tearing, Durable In Use, Easy To Use And Clean // 3 Pack Big DIY Planter pot mold, 3 Pack Coaster Silicone Mold, 3 Styles: Square, Round, Hexagon. The Planter molds and the coaster molds are fully matched. These Planter molds are used to make Plant pot, Flower pots, DIY Flower Pot Molds, planter pot mold or some other decorations. // Size of 3 Planter Molds--Cube Mold: Internal Width 2.87", internal depth 2.95", Need 8.6 oz resin to fill it. Cylinder Mold: Internal diameter 2.95", internal depth 2.95", Need 6.3 oz resin to fill it. Hexagon Mold: Internal Width 2.95", internal depth 2.95", Need 7.5 oz resin to fill it. // Size of 3 Coaster Molds--Shown in Figure 5, Need 3.4 oz of resin to fill Square mold, Need 3 oz of resin to fill Hexagon mold, Need 3.1 oz of resin to fill Round mold // Please do not use Strong Corrosive Material, which will shorten the life of the coaster, and even lead to the failure to demould and damage the mold. //...

-Titulo Original : Big DIY Pyramid Resin Mold Set, Large Silicone Pyramid Molds, Jewelry Making Craft Mould Tool, 15cm/5.9, 2 X Inner Silicone Molds, 1 X Outter Shell-Fabricante : VTurboWay-Descripcion Original: High-quality silicone, safety, high Flexible, full transparency, Super easy to de-mold // Fill the entire mold about 1200 grams of resin, You Can Make Any Size Below 15.7cm artworks // Be careful to place the Silicone mold insert into the plastic shell accurately, Make sure all sides flush. Pour alcohol into the outer shell make it easy.It is recommended to use "mold release" // The mold is used to create the fantastic pyramid-shaped artwork, Mold is reusable // The inner silicone molds has a service life, and the outer shell will not be lost. An additional inner silicone molds is a more economical solution //...

-Titulo Original : 2 Pack Big DIY Plant Pot Mold, Cube And Cylinder Resin Planter Mold, Square Silicone Molds, DIY Flower Pot Molds, Pen Holder Molds-Fabricante : VTurboWay-Descripcion Original: Material: Silicone. Silicone Is Flexible, Resistant To Tearing, Durable In Use, Easy To Use And Clean // This mold is used to make Plant pot, Flower pots, DIY Flower Pot Molds, planter pot mold or some other decorations. it's reusable // You can also put small objects into the transparent resin, like a dry flower, sea shell, small stone, etc // Can Be Used As Resin, Cabochon, Polymer Clay, Gum Paste, Pmc, Wax, Candle, Soap Mold And They'Re Reusable // Size of Cube Mold: Internal Width 2.87", internal depth 2.95", Need 8.6 oz resin to fill it. Size of Cylinder Mold: Internal diameter 2.95", internal depth 2.95", Need 6.3 oz resin to fill it.So these are giant molds. It needs to be layered when the temperature is above 86F. It is recommended to cool with water. //...

-Titulo Original : Big DIY Cylinder Resin Plant Mold, Internal Diameter 2.95, Internal Depth 2.95, Cylinder Silicone Molds, DIY Flower Pot Molds, Planter Pot Mold, Pen Holder Molds-Fabricante : VTurboWay-Descripcion Original: Material: Silicone. Silicone Is Flexible, Resistant To Tearing, Durable In Use, Easy To Use And Clean // This mold is used to make Plant pot, Flower pots, DIY Flower Pot Molds, planter pot mold or some other decorations. it's reusable // You can also put small objects into the transparent resin, like a dry flower, sea shell, small stone, etc // Can Be Used As Resin, Cabochon, Polymer Clay, Gum Paste, Pmc, Wax, Candle, Soap Mold And They'Re Reusable // Size: Internal diameter 2.95", internal depth 2.95", Need 6.3 oz resin to fill it. So this is a giant mold. It needs to be layered when the temperature is above 86F. It is recommended to cool with water. //...

-Titulo Original : 2 Pack Big DIY Planter Pot Mold, Cylinder Resin Mold, Round Coaster Silicone MoldDIY Flower Pot Molds, Pen Holder Molds-Fabricante : VTurboWay-Descripcion Original: Material: Silicone. Silicone Is Flexible, Resistant To Tearing, Durable In Use, Easy To Use And Clean // Big DIY Planter pot mold, Big Round Coaster Silicone Mold, The Planter molds and the coaster molds are fully matched. These Planter molds are used to make Plant pot, Flower pots, DIY Flower Pot Molds, planter pot mold or some other decorations. // Size of Cylinder Planter Molds--Internal diameter 2.95", internal depth 2.95", Need 6.3 oz resin to fill it. // Size of Round Coaster Molds--Diameter: 3.94", Need 3.1 oz of resin to fill Round mold // Please do not use Strong Corrosive Material, which will shorten the life of the coaster, and even lead to the failure to demould and damage the mold. //...

-Titulo Original : Big DIY Square Resin Plant Mold, Cube Silicone Molds, DIY Flower Pot Molds, Planter Pot Mold, Pen Holder Molds-Fabricante : VTurboWay-Descripcion Original: Material: Silicone. Silicone Is Flexible, Resistant To Tearing, Durable In Use, Easy To Use And Clean // This mold is used to make Plant pot, Flower pots, DIY Flower Pot Molds, planter pot mold or some other decorations. it's reusable // You can also put small objects into the transparent resin, like a dry flower, sea shell, small stone, etc // Can Be Used As Resin, Cabochon, Polymer Clay, Gum Paste, Pmc, Wax, Candle, Soap Mold And They'Re Reusable // Size: Internal Width 2.87", internal depth 2.95", Need 8.6 oz resin to fill it. So this is a giant mold. It needs to be layered when the temperature is above 86F. It is recommended to cool with water. //...

-Titulo Original : 4 Pack DIY Square Coaster Silicone Mold, Molds For Casting With Resin, Cement-Fabricante : VTurboWay-Descripcion Original: High-quality silicone, safety, high Flexible, full transparency, Super easy to de-mold // The mold is used to create square coaster, beverage coaster, bowl mat etc, Mold is reusable // It's not super soft, the bottom of the middle is not easy to bend // the size of casted product: Square Mold: 3.94" x 3.94". Need 3.4 oz of resin to fill one mold // Please do not use Strong Corrosive Material, which will shorten the life of the coaster, and even lead to the failure to demould and damage the mold. //...

-Titulo Original : Big DIY Pyramid Resin Molds Replacement Insert(Not Include Frames!!!)-Fabricante : VTurboWay-Descripcion Original: This Is A Consumable Of Pyramid Resin Molds Set,If This Is Your First Purchase of a Pyramid Molds Set , Please Visit Https://Www.Amazon.Com/Dp/B077HZJSL8 And Buy It // After Using Multiple Times, The Surface of The Pyramid Mold May Not Be Smooth. Now, Buy This Product, You Only Need Half The Cost to Get A Brand New Mold // Epoxy Resin Is Slightly Corrosive, It Can Damage The Mold Surface, Retain The Original Frame, Buy This Product Can Get a New Mold Set // The Wrong Proportion of AB Glue Will Cause The Epoxy To Never Solidify, Which Will Cause The Mold To Be Difficult to Clean. Now, Buy This Product, You Only Need Half The Cost to Get a Brand New Mold //...

-Titulo Original : 3 Pack DIY Coaster Silicone Mold, Include Round, Square, Hexagon, Molds For Casting With Resin, Cement-Fabricante : VTurboWay-Descripcion Original: High-quality silicone, safety, high Flexible, full transparency, Super easy to de-mold // The mold is used to create square coaster, beverage coaster, bowl mat etc, Mold is reusable // There are not super soft, the bottom of the middle is not easy to bend // The size of the three shapes of coasters is shown in Figure 5. Need 3.4 oz of resin to fill Square mold, Need 3 oz of resin to fill Hexagon mold, Need 3.1 oz of resin to fill Round mold // Please do not use Strong Corrosive Material, which will shorten the life of the coaster, and even lead to the failure to demould and damage the mold. //...

-Titulo Original : 3 Pack Big DIY Round Coaster Silicone Mold, Diameter 3.94/10cm, Molds For Casting With Resin, Cement-Fabricante : VTurboWay-Descripcion Original: High-quality silicone, safety, high Flexible, full transparency, Super easy to de-mold // The mold is used to create Round coaster, beverage coaster, bowl mat etc. Mold is reusable. // It's not super soft, the bottom of the middle is not easy to bend // Please do not use Strong corrosive glue, which will shorten the life of the coaster, and even lead to the failure to demould and damage the mold. //...

-Titulo Original : 2 Pcs Cam Cleats With Top Wire Flaired Leading Ring(Orange), Nylon Top Cover Tromotes Stability, Nylon Cammatic Cleats, Composite 2 Row, Boat Pilates Equipment Fast Entry, For Rope Diameter: 1/4-1/2-Fabricante : VTurboWay-Descripcion Original: 2 tacos de leva con anillo principal acampanado de alambre superior , para estabilidad de tromotes de cubierta superior de nailon, tacos Cammatic de nailon, compuesto de 2 filas, para equipo de pilates de barco de entrada rápida, para diámetro de cuerda: 1/4-1/2 - Ligero y excelente resistencia al desgaste: un diseño de diente de leva progresivo garantiza la máxima potencia de sujeción en todo tipo de línea - mientras que el desgaste de la leva y la línea es mínimo, la entrada acampanada permite un enganche fácil de la línea y una liberación rápida, fácil desmontaje para el mantenimiento, el anillo principal acampanado de alambre puede evitar que la cuerda se salga - La entrada acampanada permite un enganche fácil de la línea y una liberación rápida, Fácil desmontaje para el mantenimiento - Tamaño----Ancho: 2.5, Altura: 1.1, Agujeros de centro a centro: 1.5, Para diámetro de cuerda: 1/4-1/2, Carga máxima de trabajo: 66 lbs, Carga de rotura: 1984bs. - Parte principal aluminio, Junta Nylon. Peso ligero (Peso: 50 g), buena resistencia al desgaste, adecuado para barcos marinos y veleros Descripción del producto: liviano y excelente resistencia al desgaste: un diseño de diente de leva progresivo garantiza la máxima potencia de sujeción en todos los tipos de línea, mientras que el desgaste de la leva y la línea es mínimo El anillo principal acampanado puede evitar que la cuerda se deslice. La entrada acampanada permite un fácil enganche de la línea y una liberación rápida. Fácil desmontaje para el mantenimiento. : 1/4-1/2, carga máxima de trabajo: 66 libras, carga de rotura: 1984 libras. Parte principal de aluminio, junta de nailon. Peso ligero (Peso: 2,65 oz), buena resistencia al desgaste, apto para barcos marinos y veleros. Paquete incluido. : 2 piezas Tacos de leva de nailon con anillo principal acampanado de alambre superio...

-Titulo Original : Big DIY Pyramid Resin Mold Set, Large Silicone Pyramid Molds, Jewelry Making Craft Mould Tool, 15cm/5.9Big DIY Pyramid Resin Mold Set, Large Silicone Pyramid Molds, Jewelry Making Craft Mould Tool, 15cm/5.9-Fabricante : VTurboWay-Descripcion Original: Silicona de alta calidad, seguridad, alta flexibilidad, transparencia total, súper fácil de desmoldar Llene todo el molde con aproximadamente 1200 gramos de resina, puede hacer obras de arte de cualquier tamaño por debajo de 15,7 cm Tenga cuidado de colocar el inserto de molde de silicona en la carcasa de plástico con precisión, asegúrese de que todos los lados estén al ras. Vierta alcohol en la capa exterior para que sea más fácil. Se recomienda utilizar desmoldante El molde se utiliza para crear la fantástica obra de arte en forma de pirámide, el molde es reutilizabl...

-Titulo Original : 4 Pack DIY Bookmark Resin Mold, Bookmark Silicone Molds, Jewelry DIY Craft Transparent Mold-Fabricante : VTurboWay-Descripcion Original: Material: silicona. La silicona es flexible, resistente al desgarro, duradera en uso, fácil de usar y limpiar. FÁCIL USO: Cada molde tiene un alfiler, por lo que es fácil hacer agujeros en la parte superior del marcador sin perforar. Es fácil de cruzar con cuerda o cadena. DISEÑO ESPECIAL: El pequeño cilindro utilizado para hacer el agujero, la altura es más alta que el borde del molde, asegurando que el agujero del marcador no esté cubierto por la resina. ALTA CALIDAD: lo ayuda a hacer un marcador perfecto, garantizado para obtener bordes rectos y suaves El tamaño del marcador es de 2.5 x 14 cm. El paquete incluye 4 moldes para marcadores, puede hacer 4 estilos diferentes de marcadores a la vez...