-Titulo Original : FiberCablesDirect - 3M OM3 LC LC Fiber Patch Cable | 10Gb Duplex 50/125 LC To LC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 1g 10g 40g Lc-lc Dplx Mmf 10gbase Sfp Aqua Ofnr Lommf-Fabricante : FiberCablesDirect-Descripcion Original: Fiber Cable Description: OM3 LC LC Fiber Patch Cable 3M | 10Gig, Corning, Laser Optimized Multimode Fiber (LOMMF), 50/125 optical fiber core/cladding. Aqua, 2.0mm outer diameter, zip-cord reinforced, jumper. Used in educational, corporate, military/defense, government, healthcare, finance and commercial industries. // Fiber Patch Cable Details: 3 Meter (9.84 feet), 1/10/40Gb Multimode, Zip-Cord Reinforced, Duplex (2 Fiber Strands), 1.25mm ceramic ferrule, LC-UPC to LC-UPC, Fiber Patch Cable/Jumper Cord. // Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding. // Optical Modality Details for OM3 Ethernet Over Multimode Fiber: 1500 / 2000 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 300m | 40Gb Ethernet 40GBase-SR4 100m (330m QSFP+ eSR4) | 100Gb Ethernet 100GBase-SR10 100m. // Durable Construction, Commercial Grade, Cost Effective and Built to Last | 100% Lifetime Warranty on all fiber cables purchased from Fiber Cables Direct. // Size:3 Meter OM3 LC LC Fiber Patch Cable | 10Gb Duplex 50/125 Multimode Jumper Cord. Accelerate your network's performance to the edge of technology with this Corning 50/125um core/cladding, OM2 backwards compatible, laser optimized multimode fiber cable and extend your 10Gbps reach up to 300 meters. Assembled with ofnr riser rated, 2.0mm outer diameter, zip-cord reinforced, aqua pvc jacket that's flame retardant, water resistant, UV resistant and immune to electrical interference. Terminated with small form factor, 1.25mm ceramic ferrule LC type connectors and includes pre-installed, lc duplex clips for quick installation and management in high density cable environments. Engineered for fast and reliable connectivity between switches, transceivers, media converters, patch panels and other 1/10/40g fiber optic equipment. Fully supports fast Ethernet, 10 Gigabit Ethernet, SFP+, QSFP+, Fiber Channel, OIF, ATM, and other service provider applications.Ethernet Over OM3 Multimode Fiber Details: 1500 / 2000 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 300m | 40Gb Ethernet 40GBase-SR4 100m (330m QSFP+ eSR4) | 100Gb Ethernet 100GBase-SR10 100m.Maximum Connector Loss: 0.50 dBTypical Connector Loss: 0.30 dBTypical Return Loss -25 dBAll fiber cables are tested in accordance with ANSI/TIA/EIA-455-171-A- 2001 attenuation standards by a qualified fiber optic technician and careful packaged with test results.We provide 35+ popular length options in our online catalogs between 0.5 and 300 meters that can ship the same day. Expedited delivery options for orders we ship include USPS and UPS 1 Day, 2 Day, 3 Day and Ground. FedEx also available for international orders.We do it right with quality products, superior packaging and fast delivery anywhere in the world...

-Titulo Original : FiberCablesDirect - 25M OM3 LC LC Fiber Patch Cable | 10Gb Duplex 50/125 LC To LC Multimode Jumper 25 Meter (82.02ft) | Length Options: 0.5M-300M | 1g 10g 40g Lc-lc Dx Mmf 10gbase Sfp Aqua Ofnr Lommf-Fabricante : FiberCablesDirect-Descripcion Original: Fiber Cable Description: OM3 LC LC Fiber Patch Cable 25M | 10Gig, Corning, Laser Optimized Multimode Fiber (LOMMF), 50/125 optical fiber core/cladding. Aqua, 2.0mm outer diameter, zip-cord reinforced, jumper. Used in educational, corporate, military/defense, government, healthcare, finance and commercial industries. // Fiber Patch Cable Details: 25 Meter (82.02 feet), 1/10/40Gb Multimode, Zip-Cord Reinforced, Duplex (2 Fiber Strands), 1.25mm ceramic ferrule, LC-UPC to LC-UPC, Fiber Patch Cable/Jumper Cord. // Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding. // Optical Modality Details for OM3 Ethernet Over Multimode Fiber: 1500 / 2000 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 300m | 40Gb Ethernet 40GBase-SR4 100m (330m QSFP+ eSR4) | 100Gb Ethernet 100GBase-SR10 100m. // Durable Construction, Commercial Grade, Cost Effective and Built to Last | 100% Lifetime Warranty on all fiber cables purchased from Fiber Cables Direct. // Size:25 Meter OM3 LC LC Fiber Patch Cable | 10Gb Duplex 50/125 Multimode Jumper Cord. Accelerate your network's performance to the edge of technology with this Corning 50/125um core/cladding, OM2 backwards compatible, laser optimized multimode fiber cable and extend your 10Gbps reach up to 300 meters. Assembled with ofnr riser rated, 2.0mm outer diameter, zip-cord reinforced, aqua pvc jacket that's flame retardant, water resistant, UV resistant and immune to electrical interference. Terminated with small form factor, 1.25mm ceramic ferrule LC type connectors and includes pre-installed, lc duplex clips for quick installation and management in high density cable environments. Engineered for fast and reliable connectivity between switches, transceivers, media converters, patch panels and other 1/10/40g fiber optic equipment. Fully supports fast Ethernet, 10 Gigabit Ethernet, SFP+, QSFP+, Fiber Channel, OIF, ATM, and other service provider applications.Ethernet Over OM3 Multimode Fiber Details: 1500 / 2000 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 300m | 40Gb Ethernet 40GBase-SR4 100m (330m QSFP+ eSR4) | 100Gb Ethernet 100GBase-SR10 100m.Maximum Connector Loss: 0.50 dBTypical Connector Loss: 0.30 dBTypical Return Loss -25 dBAll fiber cables are tested in accordance with ANSI/TIA/EIA-455-171-A- 2001 attenuation standards by a qualified fiber optic technician and careful packaged with test results.We provide 35+ popular length options in our online catalogs between 0.5 and 300 meters that can ship the same day. Expedited delivery options for orders we ship include USPS and UPS 1 Day, 2 Day, 3 Day and Ground. FedEx also available for international orders.We do it right with quality products, superior packaging and fast delivery anywhere in the world...

-Titulo Original : FiberCablesDirect - 6M OM4 LC LC Fiber Patch Cable | 100Gb Duplex 50/125 LC To LC Multimode Jumper 6 Meter (19.68ft) | Length Options: 0.5M-300M | 10/40/100gb Mmf Sfp 100gbase Dplx Ofnr Om4-lc-lc-Fabricante : FiberCablesDirect-Descripcion Original: Fiber Cable Description: OM4 LC LC Fiber Patch Cable 6M | 100Gig, Corning, Laser Optimized Multimode Fiber (LOMMF), 50/125 optical fiber core/cladding. Aqua, 2.0mm outer diameter, zip-cord reinforced, jumper. Used in educational, corporate, military/defense, government, healthcare, finance and commercial industries. // Fiber Patch Cable Details: 6 Meter (19.68 feet), 1/10/40/100Gb Multimode, Zip-Cord Reinforced, Duplex (2 Fiber Strands), 1.25mm ceramic ferrule, LC-UPC to LC-UPC, Fiber Patch Cable/Jumper Cord. // Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding. // Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 400m | 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR4) | 100Gb Ethernet 100GBase-SR10 150m. // Size:6 Meter OM4 LC LC Fiber Patch Cable | 100Gb Duplex 50/125 Multimode Jumper Cord. Accelerate your network's performance to the edge of technology with this Corning 50/125um core/cladding, OM3/OM2 backwards compatible, laser optimized multimode fiber cable and extend your 100Gbps reach. Assembled with OFNR riser rated, 2.0mm outer diameter, zip-cord reinforced, aqua PVC jacket that's flame retardant, water resistant, UV resistant and immune to electrical interference. Terminated with small form factor, 1.25mm ceramic ferrule LC type connectors and include pre-installed, lc duplex clips for quick installation and management in high density cable environments. Engineered for fast and reliable connectivity between switches, transceivers, media converters, patch panels and other 10/40/100g fiber optic equipment. Supports fast Ethernet, 100 Gigabit Ethernet, SFP+, QSFP+, FX, SX, SR, SR4, eSR4, SR10 and other service provider applications.Ethernet Over OM4 Multimode Fiber Details: 3500/4700MHz-km Modal Bandwidth 850nm/1300nm, Fast Ethernet 100Basw-FX 2000m, 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord), 10Gb Ethernet 10GBase-SR 400m, 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR4), 100Gb Ethernet 100GBase-SR10 150m and 850nm VCSELs optimized.Maximum Connector Loss: 0.50 dBTypical Connector Loss: 0.30 dBTypical Return Loss -25 dBAll fiber cables are tested in accordance with ANSI/TIA/EIA-455-171-A- 2001 attenuation standards by a qualified fiber optic technician and careful packaged with test results.We provide 35+ popular length options in our online catalogs between 0.5 and 300 meters that can ship the same day. Expedited delivery options for orders we ship include USPS and UPS 1 Day, 2 Day, 3 Day and Ground. FedEx also available for international orders.We do it right with lifetime warranty, quality products, superior packaging and fast delivery anywhere in the world...

-Titulo Original : FiberCablesDirect - 10M OM4 LC LC Fiber Patch Cable | 100Gb Duplex 50/125 LC To LC Multimode Jumper 10 Meter (32.8ft) | Length Options: 0.5M-300M | 10/40/100gb Mmf Sfp 100gbase Dplx Ofnr Om4-lc-lc-Fabricante : FiberCablesDirect-Descripcion Original: Fiber Cable Description: OM4 LC LC Fiber Patch Cable 10M | 100Gig, Corning, Laser Optimized Multimode Fiber (LOMMF), 50/125 optical fiber core/cladding. Aqua, 2.0mm outer diameter, zip-cord reinforced, jumper. Used in educational, corporate, military/defense, government, healthcare, finance and commercial industries. // Fiber Patch Cable Details: 10 Meter (32.8 feet), 1/10/40/100Gb Multimode, Zip-Cord Reinforced, Duplex (2 Fiber Strands), 1.25mm ceramic ferrule, LC-UPC to LC-UPC, Fiber Patch Cable/Jumper Cord. // Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding. // Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 400m | 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR4) | 100Gb Ethernet 100GBase-SR10 150m. // Size:10 Meter OM4 LC LC Fiber Patch Cable | 100Gb Duplex 50/125 Multimode Jumper Cord. Accelerate your network's performance to the edge of technology with this Corning 50/125um core/cladding, OM3/OM2 backwards compatible, laser optimized multimode fiber cable and extend your 100Gbps reach. Assembled with OFNR riser rated, 2.0mm outer diameter, zip-cord reinforced, aqua PVC jacket that's flame retardant, water resistant, UV resistant and immune to electrical interference. Terminated with small form factor, 1.25mm ceramic ferrule LC type connectors and include pre-installed, lc duplex clips for quick installation and management in high density cable environments. Engineered for fast and reliable connectivity between switches, transceivers, media converters, patch panels and other 10/40/100g fiber optic equipment. Supports fast Ethernet, 100 Gigabit Ethernet, SFP+, QSFP+, FX, SX, SR, SR4, eSR4, SR10 and other service provider applications.Ethernet Over OM4 Multimode Fiber Details: 3500/4700MHz-km Modal Bandwidth 850nm/1300nm, Fast Ethernet 100Basw-FX 2000m, 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord), 10Gb Ethernet 10GBase-SR 400m, 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR4), 100Gb Ethernet 100GBase-SR10 150m and 850nm VCSELs optimized.Maximum Connector Loss: 0.50 dBTypical Connector Loss: 0.30 dBTypical Return Loss -25 dBAll fiber cables are tested in accordance with ANSI/TIA/EIA-455-171-A- 2001 attenuation standards by a qualified fiber optic technician and careful packaged with test results.We provide 35+ popular length options in our online catalogs between 0.5 and 300 meters that can ship the same day. Expedited delivery options for orders we ship include USPS and UPS 1 Day, 2 Day, 3 Day and Ground. FedEx also available for international orders.We do it right with lifetime warranty, quality products, superior packaging and fast delivery anywhere in the world...

-Titulo Original : FiberCablesDirect - 12M OM4 LC LC Fiber Patch Cable | 100Gb Duplex 50/125 LC To LC Multimode Jumper 12 Meter (39.37ft) | Length Options: 0.5M-300M | 10/40/100gb Mmf Sfp 100gbase Dplx Ofnr Om4-lc-lc-Fabricante : FiberCablesDirect-Descripcion Original: Fiber Cable Description: OM4 LC LC Fiber Patch Cable 12M | 100Gig, Corning, Laser Optimized Multimode Fiber (LOMMF), 50/125 optical fiber core/cladding. Aqua, 2.0mm outer diameter, zip-cord reinforced, jumper. Used in educational, corporate, military/defense, government, healthcare, finance and commercial industries. // Fiber Patch Cable Details: 12 Meter (39.37 feet), 1/10/40/100Gb Multimode, Zip-Cord Reinforced, Duplex (2 Fiber Strands), 1.25mm ceramic ferrule, LC-UPC to LC-UPC, Fiber Patch Cable/Jumper Cord. // Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding. // Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 400m | 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR4) | 100Gb Ethernet 100GBase-SR10 150m. // Size:12 Meter OM4 LC LC Fiber Patch Cable | 100Gb Duplex 50/125 Multimode Jumper Cord. Accelerate your network's performance to the edge of technology with this Corning 50/125um core/cladding, OM3/OM2 backwards compatible, laser optimized multimode fiber cable and extend your 100Gbps reach. Assembled with OFNR riser rated, 2.0mm outer diameter, zip-cord reinforced, aqua PVC jacket that's flame retardant, water resistant, UV resistant and immune to electrical interference. Terminated with small form factor, 1.25mm ceramic ferrule LC type connectors and include pre-installed, lc duplex clips for quick installation and management in high density cable environments. Engineered for fast and reliable connectivity between switches, transceivers, media converters, patch panels and other 10/40/100g fiber optic equipment. Supports fast Ethernet, 100 Gigabit Ethernet, SFP+, QSFP+, FX, SX, SR, SR4, eSR4, SR10 and other service provider applications.Ethernet Over OM4 Multimode Fiber Details: 3500/4700MHz-km Modal Bandwidth 850nm/1300nm, Fast Ethernet 100Basw-FX 2000m, 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord), 10Gb Ethernet 10GBase-SR 400m, 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR4), 100Gb Ethernet 100GBase-SR10 150m and 850nm VCSELs optimized.Maximum Connector Loss: 0.50 dBTypical Connector Loss: 0.30 dBTypical Return Loss -25 dBAll fiber cables are tested in accordance with ANSI/TIA/EIA-455-171-A- 2001 attenuation standards by a qualified fiber optic technician and careful packaged with test results.We provide 35+ popular length options in our online catalogs between 0.5 and 300 meters that can ship the same day. Expedited delivery options for orders we ship include USPS and UPS 1 Day, 2 Day, 3 Day and Ground. FedEx also available for international orders.We do it right with lifetime warranty, quality products, superior packaging and fast delivery anywhere in the world...

-Titulo Original : FiberCablesDirect - 15M OM4 LC LC Fiber Patch Cable | 100Gb Duplex 50/125 LC To LC Multimode Jumper 15 Meter (49.21ft) | Length Options: 0.5M-300M | 10/40/100gb Mmf Sfp 100gbase Dplx Ofnr Om4-lc-lc-Fabricante : FiberCablesDirect-Descripcion Original: Fiber Cable Description: OM4 LC LC Fiber Patch Cable 15M | 100Gig, Corning, Laser Optimized Multimode Fiber (LOMMF), 50/125 optical fiber core/cladding. Aqua, 2.0mm outer diameter, zip-cord reinforced, jumper. Used in educational, corporate, military/defense, government, healthcare, finance and commercial industries. // Fiber Patch Cable Details: 15 Meter (49.21 feet), 1/10/40/100Gb Multimode, Zip-Cord Reinforced, Duplex (2 Fiber Strands), 1.25mm ceramic ferrule, LC-UPC to LC-UPC, Fiber Patch Cable/Jumper Cord. // Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding. // Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 400m | 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR4) | 100Gb Ethernet 100GBase-SR10 150m. // Size:15 Meter OM4 LC LC Fiber Patch Cable | 100Gb Duplex 50/125 Multimode Jumper Cord. Accelerate your network's performance to the edge of technology with this Corning 50/125um core/cladding, OM3/OM2 backwards compatible, laser optimized multimode fiber cable and extend your 100Gbps reach. Assembled with OFNR riser rated, 2.0mm outer diameter, zip-cord reinforced, aqua PVC jacket that's flame retardant, water resistant, UV resistant and immune to electrical interference. Terminated with small form factor, 1.25mm ceramic ferrule LC type connectors and include pre-installed, lc duplex clips for quick installation and management in high density cable environments. Engineered for fast and reliable connectivity between switches, transceivers, media converters, patch panels and other 10/40/100g fiber optic equipment. Supports fast Ethernet, 100 Gigabit Ethernet, SFP+, QSFP+, FX, SX, SR, SR4, eSR4, SR10 and other service provider applications.Ethernet Over OM4 Multimode Fiber Details: 3500/4700MHz-km Modal Bandwidth 850nm/1300nm, Fast Ethernet 100Basw-FX 2000m, 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord), 10Gb Ethernet 10GBase-SR 400m, 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR4), 100Gb Ethernet 100GBase-SR10 150m and 850nm VCSELs optimized.Maximum Connector Loss: 0.50 dBTypical Connector Loss: 0.30 dBTypical Return Loss -25 dBAll fiber cables are tested in accordance with ANSI/TIA/EIA-455-171-A- 2001 attenuation standards by a qualified fiber optic technician and careful packaged with test results.We provide 35+ popular length options in our online catalogs between 0.5 and 300 meters that can ship the same day. Expedited delivery options for orders we ship include USPS and UPS 1 Day, 2 Day, 3 Day and Ground. FedEx also available for international orders.We do it right with lifetime warranty, quality products, superior packaging and fast delivery anywhere in the world...

-Titulo Original : FiberCablesDirect - 20M OM4 LC LC Fiber Patch Cable | 100Gb Duplex 50/125 LC To LC Multimode Jumper 20 Meter (65.61ft) | Length Options: 0.5M-300M | 10/40/100gb Mmf Sfp 100gbase Dplx Ofnr Om4-lc-lc-Fabricante : FiberCablesDirect-Descripcion Original: Fiber Cable Description: OM4 LC LC Fiber Patch Cable 20M | 100Gig, Corning, Laser Optimized Multimode Fiber (LOMMF), 50/125 optical fiber core/cladding. Aqua, 2.0mm outer diameter, zip-cord reinforced, jumper. Used in educational, corporate, military/defense, government, healthcare, finance and commercial industries. // Fiber Patch Cable Details: 20 Meter (65.61 feet), 1/10/40/100Gb Multimode, Zip-Cord Reinforced, Duplex (2 Fiber Strands), 1.25mm ceramic ferrule, LC-UPC to LC-UPC, Fiber Patch Cable/Jumper Cord. // Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding. // Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 400m | 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR4) | 100Gb Ethernet 100GBase-SR10 150m. // Size:20 Meter OM4 LC LC Fiber Patch Cable | 100Gb Duplex 50/125 Multimode Jumper Cord. Accelerate your network's performance to the edge of technology with this Corning 50/125um core/cladding, OM3/OM2 backwards compatible, laser optimized multimode fiber cable and extend your 100Gbps reach. Assembled with OFNR riser rated, 2.0mm outer diameter, zip-cord reinforced, aqua PVC jacket that's flame retardant, water resistant, UV resistant and immune to electrical interference. Terminated with small form factor, 1.25mm ceramic ferrule LC type connectors and include pre-installed, lc duplex clips for quick installation and management in high density cable environments. Engineered for fast and reliable connectivity between switches, transceivers, media converters, patch panels and other 10/40/100g fiber optic equipment. Supports fast Ethernet, 100 Gigabit Ethernet, SFP+, QSFP+, FX, SX, SR, SR4, eSR4, SR10 and other service provider applications.Ethernet Over OM4 Multimode Fiber Details: 3500/4700MHz-km Modal Bandwidth 850nm/1300nm, Fast Ethernet 100Basw-FX 2000m, 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord), 10Gb Ethernet 10GBase-SR 400m, 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR4), 100Gb Ethernet 100GBase-SR10 150m and 850nm VCSELs optimized.Maximum Connector Loss: 0.50 dBTypical Connector Loss: 0.30 dBTypical Return Loss -25 dBAll fiber cables are tested in accordance with ANSI/TIA/EIA-455-171-A- 2001 attenuation standards by a qualified fiber optic technician and careful packaged with test results.We provide 35+ popular length options in our online catalogs between 0.5 and 300 meters that can ship the same day. Expedited delivery options for orders we ship include USPS and UPS 1 Day, 2 Day, 3 Day and Ground. FedEx also available for international orders.We do it right with lifetime warranty, quality products, superior packaging and fast delivery anywhere in the world...

-Titulo Original : FiberCablesDirect - 40M OM4 LC LC Fiber Patch Cable | 100Gb Duplex 50/125 LC To LC Multimode Jumper 40 Meter (131.23ft) | Length Options: 0.5M-300M | 10/40/100gb Mmf Sfp 100gbase Dplx Ofnr Om4-lc-lc-Fabricante : FiberCablesDirect-Descripcion Original: Fiber Cable Description: OM4 LC LC Fiber Patch Cable 40M | 100Gig, Corning, Laser Optimized Multimode Fiber (LOMMF), 50/125 optical fiber core/cladding. Aqua, 2.0mm outer diameter, zip-cord reinforced, jumper. Used in educational, corporate, military/defense, government, healthcare, finance and commercial industries. // Fiber Patch Cable Details: 40 Meter (131.23 feet), 1/10/40/100Gb Multimode, Zip-Cord Reinforced, Duplex (2 Fiber Strands), 1.25mm ceramic ferrule, LC-UPC to LC-UPC, Fiber Patch Cable/Jumper Cord. // Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding. // Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 400m | 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR4) | 100Gb Ethernet 100GBase-SR10 150m. // Size:40 Meter OM4 LC LC Fiber Patch Cable | 100Gb Duplex 50/125 Multimode Jumper Cord. Accelerate your network's performance to the edge of technology with this Corning 50/125um core/cladding, OM3/OM2 backwards compatible, laser optimized multimode fiber cable and extend your 100Gbps reach. Assembled with OFNR riser rated, 2.0mm outer diameter, zip-cord reinforced, aqua PVC jacket that's flame retardant, water resistant, UV resistant and immune to electrical interference. Terminated with small form factor, 1.25mm ceramic ferrule LC type connectors and include pre-installed, lc duplex clips for quick installation and management in high density cable environments. Engineered for fast and reliable connectivity between switches, transceivers, media converters, patch panels and other 10/40/100g fiber optic equipment. Supports fast Ethernet, 100 Gigabit Ethernet, SFP+, QSFP+, FX, SX, SR, SR4, eSR4, SR10 and other service provider applications.Ethernet Over OM4 Multimode Fiber Details: 3500/4700MHz-km Modal Bandwidth 850nm/1300nm, Fast Ethernet 100Basw-FX 2000m, 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord), 10Gb Ethernet 10GBase-SR 400m, 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR4), 100Gb Ethernet 100GBase-SR10 150m and 850nm VCSELs optimized.Maximum Connector Loss: 0.50 dBTypical Connector Loss: 0.30 dBTypical Return Loss -25 dBAll fiber cables are tested in accordance with ANSI/TIA/EIA-455-171-A- 2001 attenuation standards by a qualified fiber optic technician and careful packaged with test results.We provide 35+ popular length options in our online catalogs between 0.5 and 300 meters that can ship the same day. Expedited delivery options for orders we ship include USPS and UPS 1 Day, 2 Day, 3 Day and Ground. FedEx also available for international orders.We do it right with lifetime warranty, quality products, superior packaging and fast delivery anywhere in the world...

-Titulo Original : FiberCablesDirect - 2.5M OM4 LC LC Fiber Patch Cable | 100Gb Duplex 50/125 LC To LC Multimode Jumper 2.5 Meter (8.20ft) | Length Options: 0.5M-300M | 10/40/100gb Mmf Sfp 100gbase Dplx Ofnr Om4-lc-lc-Fabricante : FiberCablesDirect-Descripcion Original: Fiber Cable Description: OM4 LC LC Fiber Patch Cable 2.5M | 100Gig, Corning, Laser Optimized Multimode Fiber (LOMMF), 50/125 optical fiber core/cladding. Aqua, 2.0mm outer diameter, zip-cord reinforced, jumper. Used in educational, corporate, military/defense, government, healthcare, finance and commercial industries. // Fiber Patch Cable Details: 2.5 Meter (8.20 feet), 1/10/40/100Gb Multimode, Zip-Cord Reinforced, Duplex (2 Fiber Strands), 1.25mm ceramic ferrule, LC-UPC to LC-UPC, Fiber Patch Cable/Jumper Cord. // Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding. // Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 400m | 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR4) | 100Gb Ethernet 100GBase-SR10 150m. // Size:2.5 Meter OM4 LC LC Fiber Patch Cable | 100Gb Duplex 50/125 Multimode Jumper Cord. Accelerate your network's performance to the edge of technology with this Corning 50/125um core/cladding, OM3/OM2 backwards compatible, laser optimized multimode fiber cable and extend your 100Gbps reach. Assembled with OFNR riser rated, 2.0mm outer diameter, zip-cord reinforced, aqua PVC jacket that's flame retardant, water resistant, UV resistant and immune to electrical interference. Terminated with small form factor, 1.25mm ceramic ferrule LC type connectors and include pre-installed, lc duplex clips for quick installation and management in high density cable environments. Engineered for fast and reliable connectivity between switches, transceivers, media converters, patch panels and other 10/40/100g fiber optic equipment. Supports fast Ethernet, 100 Gigabit Ethernet, SFP+, QSFP+, FX, SX, SR, SR4, eSR4, SR10 and other service provider applications.Ethernet Over OM4 Multimode Fiber Details: 3500/4700MHz-km Modal Bandwidth 850nm/1300nm, Fast Ethernet 100Basw-FX 2000m, 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord), 10Gb Ethernet 10GBase-SR 400m, 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR4), 100Gb Ethernet 100GBase-SR10 150m and 850nm VCSELs optimized.Maximum Connector Loss: 0.50 dBTypical Connector Loss: 0.30 dBTypical Return Loss -25 dBAll fiber cables are tested in accordance with ANSI/TIA/EIA-455-171-A- 2001 attenuation standards by a qualified fiber optic technician and careful packaged with test results.We provide 35+ popular length options in our online catalogs between 0.5 and 300 meters that can ship the same day. Expedited delivery options for orders we ship include USPS and UPS 1 Day, 2 Day, 3 Day and Ground. FedEx also available for international orders.We do it right with lifetime warranty, quality products, superior packaging and fast delivery anywhere in the world...

-Titulo Original : FiberCablesDirect - 3.5M OM4 LC LC Fiber Patch Cable | 100Gb Duplex 50/125 LC To LC Multimode Jumper 3.5 Meter (11.48ft) | Length Options: 0.5M-300M | 10/40/100gb Mmf Sfp 100gbase Dplx Ofnr Om4-lc-lc-Fabricante : FiberCablesDirect-Descripcion Original: Fiber Cable Description: OM4 LC LC Fiber Patch Cable 3.5M | 100Gig, Corning, Laser Optimized Multimode Fiber (LOMMF), 50/125 optical fiber core/cladding. Aqua, 2.0mm outer diameter, zip-cord reinforced, jumper. Used in educational, corporate, military/defense, government, healthcare, finance and commercial industries. // Fiber Patch Cable Details: 3.5 Meter (11.48 feet), 1/10/40/100Gb Multimode, Zip-Cord Reinforced, Duplex (2 Fiber Strands), 1.25mm ceramic ferrule, LC-UPC to LC-UPC, Fiber Patch Cable/Jumper Cord. // Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding. // Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 400m | 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR4) | 100Gb Ethernet 100GBase-SR10 150m. // Size:3.5 Meter OM4 LC LC Fiber Patch Cable | 100Gb Duplex 50/125 Multimode Jumper Cord. Accelerate your network's performance to the edge of technology with this Corning 50/125um core/cladding, OM3/OM2 backwards compatible, laser optimized multimode fiber cable and extend your 100Gbps reach. Assembled with OFNR riser rated, 2.0mm outer diameter, zip-cord reinforced, aqua PVC jacket that's flame retardant, water resistant, UV resistant and immune to electrical interference. Terminated with small form factor, 1.25mm ceramic ferrule LC type connectors and include pre-installed, lc duplex clips for quick installation and management in high density cable environments. Engineered for fast and reliable connectivity between switches, transceivers, media converters, patch panels and other 10/40/100g fiber optic equipment. Supports fast Ethernet, 100 Gigabit Ethernet, SFP+, QSFP+, FX, SX, SR, SR4, eSR4, SR10 and other service provider applications.Ethernet Over OM4 Multimode Fiber Details: 3500/4700MHz-km Modal Bandwidth 850nm/1300nm, Fast Ethernet 100Basw-FX 2000m, 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord), 10Gb Ethernet 10GBase-SR 400m, 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR4), 100Gb Ethernet 100GBase-SR10 150m and 850nm VCSELs optimized.Maximum Connector Loss: 0.50 dBTypical Connector Loss: 0.30 dBTypical Return Loss -25 dBAll fiber cables are tested in accordance with ANSI/TIA/EIA-455-171-A- 2001 attenuation standards by a qualified fiber optic technician and careful packaged with test results.We provide 35+ popular length options in our online catalogs between 0.5 and 300 meters that can ship the same day. Expedited delivery options for orders we ship include USPS and UPS 1 Day, 2 Day, 3 Day and Ground. FedEx also available for international orders.We do it right with lifetime warranty, quality products, superior packaging and fast delivery anywhere in the world...

-Titulo Original : FiberCablesDirect - 200M OM1 SC SC Fiber Patch Cable | In/Outdoor 1Gb Duplex 62.5/125 SC To SC Multimode Jumper 200 Meter (656.16ft) | Length Options: 0.5M-300M | 1/10g Mm Upc Sfp 1gbase I/o Om1-sc-sc-Fabricante : FiberCablesDirect-Descripcion Original: - Descripción del cable de fibra: Cable de conexión de fibra OM1 SC a SC de 200 metros | Cable de conexión de fibra multimodo dúplex Indr/Otdr de 1 Gb, fibra óptica Corning 62,5/125, forro negro, zip-cord reforzado, cable puente. | Educación, Corporativo, Militar/Defensa, Gobierno, Salud, Finanzas, Comercial General, Aplicaciones de Redes Informáticas. - Detalles del cable de conexión de fibra: 200 metros (656,16 pies), dúplex (2 hebras de fibra), 1/10 Gb, OFNR, reforzado con cable zip, terminación SC a SC, cables de conexión/cables puente MMF (fibra multimodo). - Núcleo/revestimiento: núcleo de fibra Corning de 62,5 micras de diámetro/revestimiento de 125 micras de diámetro (1 micra es 1 millonésima/1 metro). El núcleo de fibra óptica está rodeado por un material de revestimiento transparente de baja refracción. La luz está contenida dentro del núcleo de la fibra (reflexión interna total), lo que hace que la fibra dentro del conjunto del latiguillo actúe como una guía de ondas. La luz viaja a través de la fibra rebotando en el límite entre el núcleo y el revestimiento. - Detalles de Modalidad Óptica para Ethernet Sobre Fibra Multimodo OM1: 1Gb Ethernet Distancia de 275 Metros a 850 nm / 550 Metros a 1300 nm. 10Gb Ethernet Distancia de 33 Metros a 850/1300nm. - Ancho de banda de red de fibra para OM1: 160-200/500 MHz-km ****850/1300nm. Cable de conexión de fibra SC OM1 SC de 200 metros | Cable de puente multimodo SC/UPC a SC/UPC 62,5/125 dúplex para interiores/exteriores 1G Proteja su red contra la humedad y la exposición a la luz solar con nuestro cableado de fibra multimodo OM1 para interiores/exteriores. Esta funda exterior duradera de PE (polietileno) negra OFNR (clasificada para elevadores) es resistente al agua, a los rayos UV, inmune a las interferencias eléctricas y es retardante del fuego. También tiene un rango de temperatura de funcionamiento entre -20*C y +70*C. La calidad es importante para nosotros, es por eso que utilizamos núcleos de fibra multimodo Corning de 62,5/125 micras, 1 Gb/10 Gb de la más alta calidad en todos nuestros ensamblajes de modalidad OM1. Terminado con conectores dúplex tipo SC de 2,5 mm con férula de cerámica push/pull (incluidos clips SC dúplex preinstalados). Pérdida máxima del conector: 0,50 dB Pérdida típica del conector: 0,30 dB Pérdida típica de retorno -25 dB Construido para durar y diseñado para conectividad de alta velocidad entre conmutadores, transceptores, convertidores de medios, paneles de conexión y otros equipos de fibra óptica de 1 Gb y 10 Gb. Totalmente compatible con Fast Ethernet, SFP+, 1 Gigabit Ethernet, Fibre Channel, OIF y otras aplicaciones. Detalles de Ethernet sobre fibra multimodo OM1 (MMF): 1 Gb Ethernet Distancia de 275 metros **** 850 nm / 550 metros **** 1300 nm 10 Gb Ethernet Distancia de 33 metros **** 850/1300 nm OM1 El ancho de banda es 160- 200/500 MHz-km ****850/1300 nm Todos los cables de fibra son probados de acuerdo con los estándares de atenuación ANSI/TIA/EIA-455-171-A-2001 por un técnico calificado y empaquetados cuidadosamente con los resultados de las pruebas. 1 pack 200m....