-Titulo Original : Amana Tool - Bu-515 High Precision Saw Blade Bore Reduction Bushing 30mm To 5/8-Fabricante : Amana Tool-Descripcion Original: Amana Tool - Buje reductor BU-515 para hoja de sierra de alta precisión, de 30 mm a 5/8 - Diámetro (D): 30 mm - Diámetro (D): 5/8 - Corte (B): 0,070 (1,8 mm) - A: 0,070 (1,8 mm) - Compromiso de ofrecer productos innovadores y de la más alta calidad. Diseñado para reducir el diámetro del eje. La mayoría de los bujes para hojas de sierra tienen dentados en el borde exterior para un mejor agarre y ajuste. n.° BU-515, diámetro (D): 30 mm, diámetro (D): 5/8, corte (B): 0,070 (1,8 mm), A: 0,070 (1,8 mm)...

-Titulo Original : Amana Tool Con-er25 42mm Cnc Collet Nut For Standard Er25-Fabricante : Amana Tool-Descripcion Original: Especificaciones: (D) Diámetro: 0.453 in Longitud total (L): 0.709 in Pinza Estándar: ER11 D1: 0.354 in B: 0.079 in (d) Vástago: 1/...

-Titulo Original : Amana Tool - 47642 1/4 Shank Cnc Extension Adapter For 1/4 Shank Router Bits-Fabricante : Amana Tool-Descripcion Original: - (D) Diámetro 5/8 - (D) vástago 1/4 - Longitud total (L) 2-5/8 - RPM máx. 18 000 - L1 15/16 Adaptador extensor CNC fabricado especialmente para brocas de enrutador con vástago de 1/4, n.° 47642, (D) Diámetro 5/8, (D) vástago 1/4, longitud total (L) 2-5/8, RPM máx. 18 000, L1 15/16, L2 1-3/16, L3 1/4, D1 1/4, 47642 Adaptador de extensión CNC con vástago de 1/4 de pulgada para brocas de enrutador con vástago de 1/4 de pulgad...

-Titulo Original : Amana Tool - Lb12961 Carbide Tipped Non-melt Plastic 12 Dia X 96t M-tcg, -2 Deg, 1 In-Fabricante : Amana Tool-Descripcion Original: - (D) Diámetro: 12 (300 mm) - Dientes: 96 - (D) Orificio: 1 - Afilado de dientes: m-tcg - Ángulo de la cuchilla: -2 Al cortar acrílicos y plásticos, la soldadura de virutas (la fusión del material) es un problema, pero no con estas hojas que no se derriten. Con un afilado de triple viruta modificado y un ángulo de gancho negativo de 2*, producen menos calor que una hoja estándar, dejando un borde nítido y suave., #LB12961, (D) Diámetro: 12 (300 mm), dientes: 96, (D) Orificio: 1, afilado de dientes: m-tcg, ángulo de gancho: -2*, corte (B): .125 (3.2 mm), Placa (C): .102 (2.6 mm), LB12961 Punta de carburo de plástico no derretido de 12 pulgadas de diámetro X 96T m-tcg, -2 grados, orificio de 1 pulgad...

-Titulo Original : Amana Tool - 612600 Carbide Tipped Cut-off & Crosscut 12 Dia X 60t Atb, 10 Deg, 1 I-Fabricante : Amana Tool-Descripcion Original: (D) diameter: 12 (300mm) // Teeth: 60 // (D) Bore: 1 // Tooth grind: ATB // Hook angle: 10° // As our standard Cut-Off and crosscut blade, This is ideal for table saws and sliding Table saws. Its combination of 10° hook and the alternate top bevel tooth grind provide good-quality cuts and a long cutting life.Suitable for hardwood, softwood, even plywood and chipboard. Good choice for heavy production in any cabinet-making shop, #612600, (D) diameter: 12 (300mm), teeth: 60, (D) bore: 1, tooth grind: ATB, hook angle: 10°, kerf (B): .126 (3.2mm), Plate (C): .087 (2.2mm), 612600 carbide Tipped Cut-Off and crosscut 12 inch dia X 60T ATB, 10 deg, 1 inch bor...

-Titulo Original : Amana Tool - 651610 Carbide Tipped Chipper 10 Dia X 1/16 Kerf, 5/8 Bore-Fabricante : Amana Tool-Descripcion Original: (D) diameter: 10 (250mm) // (D) Bore: 5/8 // Solutions for manufacturers, fabricators, display and cabinet professionals // U.S.A. Corporate headquarters and warehouse, located in new York // Commitment to offer the highest consistent quality and innovative products // Amana Tool has a full range of replacement parts for our dado sets, including Chippers. This allows you to replace damaged cutters and to expand the range of a standard set. These parts are manufactured to the same exacting standards as the full sets, #651610, (D) diameter: 10 (250mm), (D) bore: 5/8, 651610 carbide Tipped chipper 10 inch dia X 1/16 kerf, 5/8 bor...

-Titulo Original : Amana Tool - 651660 Carbide Tipped Chipper 6 Dia X 1/16 Kerf, 5/8 Bore-Fabricante : Amana Tool-Descripcion Original: (D) diameter: 6 (150mm) // (D) Bore: 5/8 // Solutions for manufacturers, fabricators, display and cabinet professionals // U.S.A. Corporate headquarters and warehouse, located in new York // Commitment to offer the highest consistent quality and innovative products // Amana Tool has a full range of replacement parts for our dado sets, including Chippers. This allows you to replace damaged cutters and to expand the range of a standard set. These parts are manufactured to the same exacting standards as the full sets, #651660, (D) diameter: 6 (150mm), (D) bore: 5/8, 651660 carbide Tipped chipper 6 inch dia X 1/16 kerf, 5/8 bor...

-Titulo Original : Amana Tool - 651880-ak Carbide Tipped Chipper 8 Dia X 1/8 Kerf, 5/8 Bore-Fabricante : Amana Tool-Descripcion Original: (D) Diameter: 8 (200mm) // (D) Bore: 5/8 // Solutions for manufacturers, fabricators, display and cabinet professionals // U.S.A. Corporate headquarters and warehouse, located in new York // Commitment to offer the highest consistent quality and innovative products // Amana Tool has a full range of replacement parts for our dado sets, including Chippers. This allows you to replace damaged cutters and to expand the range of a standard set. These parts are manufactured to the same exacting standards as the full sets. 8 ‘Anti-kickback’ Chippers, #651880-AK, (D) Diameter: 8 (200mm), (D) Bore: 5/8, 651880-AK carbide Tipped chipper 8 inch dia X 1/8 kerf, 5/8 Bor...

-Titulo Original : Amana Tool - 716960 Carbide Tipped Heavy Duty Cut-off & Crosscut 16 Dia X 96t Atb-Fabricante : Amana Tool-Descripcion Original: (D) diameter: 16 (400mm) // Teeth: 96 // (D) Bore: 1 // Tooth grind: ATB // Hook angle: 10° // This is a heavy-duty production blade for general trimming and crosscutting of hardwood and softwood. It has an extra-thick plate and cuts a wide kerf. The hook angle is aggressive at 10°. all blades feature the alternate top bevel grind for clean cuts, #716960, (D) diameter: 16 (400mm), teeth: 96, (D) bore: 1, tooth grind: ATB, hook angle: 10°, kerf (B): .173 (4.4mm), Plate (C): .110 (2.8mm), 716960 carbide Tipped heavy duty Cut-Off and crosscut 16 inch dia X 96T ATB, 10 deg, 1 inch bor...

-Titulo Original : Amana Tool - Dt430t721-80 Carbide Tipped Ditec 2000 Panel 430mm Dia X 72t Tcg, 18 Deg, 80m-Fabricante : Amana Tool-Descripcion Original: Material: hss-bimetal // Special feature: with ejection spring and safety STOPPER // The hole saw can be used with a power-change adapter // The cutting quality depends on the correct speed and the coolant used (see operating instructions). the diameters 16-22 mm are without Ejection spring...

-Titulo Original : Amana Tool - 694004 Carbide Tipped Combination Ripping & Crosscut 9 Dia X 40t 41-Fabricante : Amana Tool-Descripcion Original: (D) diameter: 9 (230mm) // Teeth: 40 // (D) Bore: 5/8 // Tooth grind: 4&1 // Hook angle: 15° // Where one blade must do almost everything ripping and crosscutting hardwood and softwood, cutting plywood this blade is a good choice. It is in the traditional combination-blade configuration, with a flat-top tooth and 4 Alternate top bevel teeth in groupings of five. The large gullets at the raker tooth allow deep cuts with improved Chip Ejection, #694004, (D) diameter: 9 (230mm), teeth: 40, (D) bore: 5/8, tooth grind: 4&1, hook angle: 15°, kerf (B): .126 (3.2mm), Plate (C): .087 (2.2mm), 694004 carbide Tipped combination ripping and crosscut 9 inch dia X 40T 4+1, 15 deg, 5/8 Bor...

-Titulo Original : Amana Tool - Dt200t36-20 Carbide Tipped Ditec 2000 Adjustable Type Scoring 200mm Dia X 36t-Fabricante : Amana Tool-Descripcion Original: Material: hss-bimetal // Special feature: with ejection spring and safety STOPPER // The hole saw can be used with a power-change adapter // The cutting quality depends on the correct speed and the coolant used (see operating instructions). the diameters 16-22 mm are without Ejection spring...

-Titulo Original : Amana Tool - Dt180t30-45 Carbide Tipped Ditec 2000 Adjustable Type Scoring 180mm Dia X 30t-Fabricante : Amana Tool-Descripcion Original: Material: hss-bimetal // Special feature: with ejection spring and safety STOPPER // The hole saw can be used with a power-change adapter // The cutting quality depends on the correct speed and the coolant used (see operating instructions). the diameters 16-22 mm are without Ejection spring...

-Titulo Original : Amana Tool - Dt400t721-75 Carbide Tipped Ditec 2000 Panel 400mm Dia X 72t Tcg, 18 Deg, 75m-Fabricante : Amana Tool-Descripcion Original: Material: hss-bimetal // Special feature: with ejection spring and safety STOPPER // The hole saw can be used with a power-change adapter // The cutting quality depends on the correct speed and the coolant used (see operating instructions). the diameters 16-22 mm are without Ejection spring...

-Titulo Original : Amana Tool - Msb1080c Electro-blu Carbide Tipped Double-face Melamine 10 Dia X 80t H--Fabricante : Amana Tool-Descripcion Original: (D) diameter: 10 (250mm) // Teeth: 80 // (D) Bore: 5/8 // Tooth grind: Hi-ATB // Hook angle: -2° // Alterations to the geometry and plate thickness provide improved results in certain melamine boards. The bevel angle of the ATB grind is far more acute (35°), and the plate is thinner than our standard melamine blades., #MSB1080C, (D) diameter: 10 (250mm), teeth: 80, (D) bore: 5/8, tooth grind: Hi-ATB, hook angle: -2°, kerf (B): .118 (3.0mm), Plate (C): .087 (2.2mm), MSB1080C electro-blue carbide Tipped double-face melamine 10 inch dia X 80T Hi-ATB, -2 deg, 5/8 Bore, Non-Stick coate...

-Titulo Original : Amana Tool - 514101-5/8hd Carbide Tipped Aluminum & Non-ferrous Metals 14 Dia X 100-Fabricante : Amana Tool-Descripcion Original: (D) diameter: 14 (350mm) // Teeth: 100 // (D) Bore: 5/8 // Tooth grind: TCG // Hook angle: -6° // Thanks to its special carbide formulation and blade geometry, this is the ideal blade for cutting relatively thin-walled aluminum and non-ferrous extrusions and frames. The negative hook angle (-6°), triple-chip grind and thick plate combine to produce a superior finish. The blade can also be used to cut other difficult Materials such as plastic, PVC tubing, fiberglass and ACM (aluminum composite material), #514101-5/8HD, (D) diameter: 14 (350mm), teeth: 100, (D) bore: 5/8, tooth grind: TCG, hook angle: -6°, kerf (B): .146 (3.7mm), machine: pistorious, plate (C): .118 (3.0mm), 514101-5/8HD carbide Tipped aluminum and non-ferrous metals 14 inch dia X 100T TCG, -6 deg, 5/8 Bor...

-Titulo Original : Amana Tool - 610300-30 Carbide Tipped General Purpose 10 Dia X 30t Atb, 20 Deg, 30mm-Fabricante : Amana Tool-Descripcion Original: (D) diameter: 10 (250mm) // Teeth: 30 // (D) Bore: 30mm // Tooth grind: ATB // Hook angle: 15° // This is an excellent and popular general purpose configuration blade. Its low tooth count, high hook angle, and ample gullets make it an aggressive, fast-cutting ripping blade. But its ATB grind allows it to crosscut well. A good choice for all-around use, #610300-30, (D) diameter: 10 (250mm), teeth: 30, (D) bore: 30mm, tooth grind: ATB, hook angle: 15°, kerf (B): .126 (3.2mm), pinholes: 2/7/42, 2/9/46 & 2/10/60, plate (C): .087 (2.2mm), 610300-30 carbide Tipped general Purpose 10 inch dia X 30T ATB, 20 deg, 30mm bor...

-Titulo Original : Amana Tool - Tb10101 Carbide Tipped Thin Kerf Trim 10 Dia X 100t Tcg, 10 Deg, 5/8 Bor-Fabricante : Amana Tool-Descripcion Original: (D) diameter: 10 (250mm) // Teeth: 100 // (D) Bore: 5/8 // Tooth grind: TCG // Hook angle: 10° // Thin-kerf blades require less power because they have thinner plates and narrower tips. This trim blade is ideal for jobsite Table saws and the various Miter saws for that reason. Available in either Alternate top bevel grind for cutting hardwood, softwood and plywood, or triple-chip grind for chipboard and laminate-covered material. The TC grind is also suitable for cutting thin Plexiglas, Masonite, and plastics. Use of stabilizers is recommended when cutting stock over 3/4 Thick, #TB10101, (D) diameter: 10 (250mm), teeth: 100, (D) bore: 5/8, tooth grind: TCG, hook angle: 10°, kerf (B): .090 (2.3mm), Plate (C): .062 (1.6Mm)tb10101 carbide Tipped thin kerf trim 10 inch dia X 100T TCG, 10 deg, 5/8 Bor...

-Titulo Original : Amana Tool - (616320) 16/32t Ripping Straight Grind-Fabricante : Amana Tool-Descripcion Original: Amana Tool is an industry leader for over 40 years // Devotion to consistently providing the highest quality // Solutions for manufacturers, fabricators, display and cabinet professionals // U.S.A. Corporate headquarters and warehouse, located in new York // Commitment to offer the highest consistent quality and innovative products // Amana Tool® is an industry leader for over 40 years, commitment to offer the highest consistent quality and innovative products. Devotion to consistently providing the highest quality, and providing solutions for manufacturers, fabricators, display and cabinet professionals fabricators, display and cabinet professionals. We are proud to have our corporate headquarters and warehouse, located in new York, U.S.A...

-Titulo Original : Amana Tool - Dt400t721-30 Carbide Tipped Ditec 2000 Panel 400mm Dia X 60t Tcg, 18 Deg, 30m-Fabricante : Amana Tool-Descripcion Original: Extreme runtime Accessories optimized for flexvolt // Nail tough – perfect for cutting through nail embedded wood // Increased efficiency for maximum cordless run time // Raymond E. DEWALT followed in his father's steps, and worked in plants and construction after leaving school. In all fields of work he encountered the issue of high labor costs. To help reduce these costs, whenever possible he installed a machine to handle specific needs. One fine day, M. DEWALT was hired to head a wood mill, manufacturing numerous products, from basic boxes to complete houses. The amount of work exceeded the company's capacity by far, but its owner could not afford to increase the headcount. The only solution was to ensure his men produced more work. M. DEWALT built a yoke, which he connected directly to a motor and a saw. He then fitted it onto a standard arm. The saw could be raised, lowered, moved forward and backward, and adapted to all types of angles. With this system, he could handle the same amount of work as four men, reducing labor costs beyond his wildest imagination...

-Titulo Original : Amana Tool - HG10480-30 Carbide Tipped Hollow Ground 10 Dia x 48T HG, -6 Deg, 30mm BO-Fabricante : AMANA TOOL-Descripcion Original: (D) diameter: 10 (253mm) // Teeth: 48 // (D) Bore: 30mm // Tooth grind: Hg // Hook angle: -6° // This specially designed saw blade makes exceptionally smooth cuts in melamine and other coated boards, without the need for scoring. The unique hollow grind, which pairs a triple-chip tooth with a raker tooth that's ground to a concave profile, produces crisp, clean cuts. The grind is commonly used in vertical panel saws, such as those made by striebig and Holz-Her. The negative hook angle is particularly suitable for vertical panel saws., #HG10480-30, (D) diameter: 10 (253mm), teeth: 48, (D) bore: 30mm, tooth grind: hg, hook angle: -6°, kerf (B): .126 (3.2mm), pinholes: 2/7/42, 2/9/46 & 2/10/60, machine: Holz-Her, plate (C): .087 (2.2Mm)hg10480-30 carbide Tipped hollow ground 10 inch dia X 48T hg, -6 deg, 30mm bor...

-Titulo Original : Amana Tool - 510601-30 Carbide Tipped Aluminum & Non-ferrous Metals 10 Dia X 60t Tc-Fabricante : Amana Tool-Descripcion Original: (D) diameter: 10 (250mm) // Teeth: 60 // (D) Bore: 30mm // Tooth grind: TCG // Hook angle: -6° // Thanks to its special carbide formulation and blade geometry, this is the ideal blade for cutting relatively thick-walled aluminum and non-ferrous metal bars such as copper, brass, bronze and Lead. It also is good for cutting extrusions and profiles. The negative hook angle (-6°), triple-chip grind and thick plate combine to produce a superior finish. The blade can also be used to cut other “difficult” materials such as plastic, PVC tubing, fiberglass and ACM (aluminum composite material), #510601-30, (D) diameter: 10 (250mm), teeth: 60, (D) bore: 30mm, tooth grind: TCG, hook angle: -6°, kerf (B): .126 (3.2mm), pinholes: 2/7/42, 2/9/46 & 2/10/60, plate (C): .102 (2.6mm), 510601-30 carbide Tipped aluminum and non-ferrous metals 10 inch dia X 60T TCG, -6 deg, 30mm bor...

-Titulo Original : Amana Tool - Mb86400 Carbide Tipped Double-face Melamine 8 Dia X 64t H-atb, -6 Deg, 5-Fabricante : Amana Tool-Descripcion Original: (D) diameter: 8 (200mm) // Teeth: 64 // (D) Bore: 5/8 // Tooth grind: Hi-ATB // Hook angle: -6° // Designed specifically to cut melamine, this blade does just that without chipping on the top or bottom edges. (Your Table saw must be properly tuned, of course.), the special high-atb grind (with 25° bevels) slices cleanly through fragile surface coatings like melamine and laminate. Coupled with a thick, heavy-duty plate for added stability, This blade produces extremely smooth cuts. It is easily resharpened., #MB86400, (D) diameter: 8 (200mm), teeth: 64, (D) bore: 5/8, tooth grind: Hi-ATB, hook angle: -6°, kerf (B): .110 (2.8mm), Plate (C): .087 (2.2mm), MB86400 carbide Tipped double-face melamine 8 inch dia X 64T Hi-ATB, -6 deg, 5/8 bor...

-Titulo Original : Amana Tool - Lb14108 Carbide Tipped Non-melt Plastic 14 Dia X 108t M-tcg, -2 Deg, 1 I-Fabricante : Amana Tool-Descripcion Original: (D) diameter: 14 (350mm) // Teeth: 108 // (D) Bore: 1 // Tooth grind: m-tcg // Hook angle: -2° // When cutting acrylics and plastics, chip-welding – A melting of the material is a concern. But not with these non-melt blades. With a modified triple-chip grind and a 2° negative hook angle, They produce less heat than a standard blade, leaving a crisp and smooth edge., #LB14108, (D) diameter: 14 (350mm), teeth: 108, (D) bore: 1, tooth grind: m-tcg, hook angle: -2°, kerf (B): .145 (3.7mm), Plate (C): .118 (3.0mm), LB14108 carbide Tipped non-melt plastic 14 inch dia X 108T m-tcg, -2 deg, 1 inch bor...