-Titulo Original : Kweiny MK10 Nozzle for 3D Printer Makerbot Parts and Extruder Cleaning Tools Kit | M7 Thread 0.4mm Brass Nozzle 5 Pieces and 2PCS Drill Bit for It-Fabricante : KWEINY-Descripcion Original: Brass material advantage: The heat conductivity of brass is 7 times as high as that of stainless steel. MK10 hotend structure only allows filament to have little contact with the nozzle. The material of the nozzle must be brass to ensure filament's temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of stainless steel is so poor, it is unscientific and irrational used on MK10 nozzle. // Compatibility: Fit with MK10 hotend M7 thread aluminum heater block, such as FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, FlashForge Finder, FlashForge Inventor, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice maker select plus, Qidi tech, Cocoon Create, etc. // Quantity and specification: M7 thread 0.4mm nozzle 5 pieces. 0.4mm Nozzle cleaning drill bit 2 pieces. For detailed dimensions, please refer to the drawings in the upper left. // Material: Nozzle is brass. Nozzle cleaning drill bit is stainless steel SUS304. // Durability: Nozzle cleaning drill bit can be used heaps of times, because of SUS304 stainless steel material. It will neither rust nor be broken, no matter how it is used.You only need one to solve all the same size nozzles blockage problems. // 1. After replace the nozzle, Please recalibrate the distance between nozzle and build plate to ensure the quality of print parts; 2. Don't use the needle to clean until the nozzle is heated to above 200℃(392℉).You can twist the needle to make it easier to clean up; 3. Sharp parts, please keep away from children. MK10 hotend M7 thread aluminum heater block; 0.4mm; 1.75mm/3mm; M7; Brass. 0.4mm nozzle; 0.4mm*1PCS, 0.35mm*1PCS; 70mm/2.76in; Stainless steel SUS304. 5 pieces; 2 pieces...

-Titulo Original : Kweiny MK10 Hotend Kit for 3D Printer M7 Brass Nozzle and Throat with PTFE Tube and Aluminum Heater Block Fit with M3 and M4 Thermistor-Fabricante : KWEINY-Descripcion Original: Compatibility: Fit with MK10 Dia 8mm aluminum cooling block, such as FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, FlashForge Finder, FlashForge Inventor, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice maker select plus, Qidi tech, Cocoon Create, etc. // Brass material advantage: The heat conductivity of brass is 7 times as high as that of stainless steel. MK10 hotend structure only allows filament to have little contact with the nozzle. The material of the nozzle must be brass to ensure filament’s temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of stainless steel is so poor, it is unscientific and irrational used on MK10 nozzle; // Improved Version: According to customer feedback, a M3 threaded hole has been added to the aluminum block, making it suitable for both M3 and M4 thermistor; // Quantity and specification: 1 piece MK10 hotend kit, it include these parts: 0.4mm nozzle with M7 thread 1 piece, throat with 1.75mm PTFE tube 1 piece, aluminum heater block 1 piece. For detailed dimensions, please refer to the drawings in the upper left; // Material: Nozzle is brass. Throat is stainless steel. Heater block is aluminium alloy. // Size: MK10 hotend M7 thread aluminum heater block; 0.4mm; 1.75mm; M7; Brass. MK10 hotend M7 thread aluminum heater block, MK10 aluminum cooling block; 1.75mm; lower thread M7, upper diameter φ7.8mm; 26mm; Stainless steel with 2mmX4mm PTFE tube. MK10 M7 nozzle, MK10 M7 throat, φ6mm cartridge heater, M3 or M4 thermocouples; 20mm*20mm*13mm; Aluminium alloy. 1 piece; 1 piece; 1 piece; 1 piece...

-Titulo Original : Kweiny MK10 Nozzle Multi Size for 3D Printer Makerbot Parts (0.2mm 0.4mm 0.6mm 0.8mm 1.0mm) M7 Thread Brass Nozzle for Extruder Hotend 2 Pieces of Each Size 10 Pieces in Total-Fabricante : KWEINY-Descripcion Original: Brass material advantage: The heat conductivity of brass is 7 times as high as that of stainless steel. MK10 hotend structure only allows filament to have little contact with the nozzle. The material of the nozzle must be brass to ensure filament’s temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of stainless steel is so poor, it is unscientific and irrational used on MK10 nozzle. // Compatibility: Fit with MK10 hotend M7 thread aluminum heater block, such as FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, FlashForge Finder, FlashForge Inventor, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice maker select plus, Qidi tech, Cocoon Create, etc. // Quantity and specification: M7 thread nozzle, diameter size 0.2mm 0.4mm 0.6mm 0.8mm 1.0mm, 2 pieces of each size. For detailed dimensions, please refer to the drawings in the upper left. // Multi Size: There are 5 commonly used sizes of nozzle diameter. You can experience different filament feeder rates. // Style: 1. After replace the nozzle, Please recalibrate the distance between nozzle and build plate to ensure the quality of print parts; 2. Small parts, please keep away from children. MK10 hotend M7 thread aluminum heater block; 0.2mm,0.4mm,0.6mm,0.8mm,1.0mm; 1.75mm; M7; Brass. 10PCS(diameter size 0.2mm 0.4mm 0.6mm 0.8mm 1.0mm, 2 pieces of each size)...