-Titulo Original : Oshlun SBF-100052 10-Inch 52 Tooth TCG Saw Blade With 1-Inch Arbor (5/8-Inch Bushing) For Mild Steel And Ferrous Metals-Fabricante : Oshlun-Descripcion Original: Se adapta a: Evolution Rage3 y sierras de inglete RPM máximas: 5200 Carburo de grado profesional C-6 Ranuras de expansión cortadas con láser Molienda de dientes de triple virut...

-Titulo Original : Oshlun Sbft-160004h 160mm 4 Tooth Fespro Fiber Cement Cutting Ftg Saw Blade With 20mm Arbor For Festool Ts 55 Eq, Dewalt Dws520, And Makita Sp6000k-Fabricante : Oshlun-Descripcion Original: Fits: Festool TS 55 EQ or ATF 55 E & DeWalt DWS520 & Makita SP6000K // Designed for James hardie products, fiber cement products, and certainteed weatherboard products // Flat Top Grind // Polycrystalline Diamond Tips (PCD) // Kerf: 2.2mm // Size: Our FesPro blades were designed to produce industrial quality cuts at an affordable price with a Festool, DeWalt, and Makita track saws. The fiber cement blade has been designed with durable polycrystalline diamond tips (PCD) to ensure an extended cutting life of all types of James Hardie Products, Fiber Cement Products, and CertainTeed WeatherBoards. The specially formulated PCD tips have self sharpening properties allowing them to stay sharp much longer than carbide. They can last up to 60 times longer than standard carbide tipped blades, allowing fewer blade changes and increased production. Also produces minimal dust and can cut up to 5 planks at once. All trademarks and trade names are property of their respective owners...

-Titulo Original : Oshlun Sbft-210036s 210mm 36 Tooth Fespro Ferrous Act Saw Blade With 30mm Arbor For Festool Ts 75 Eq-Fabricante : Oshlun-Descripcion Original: Fits: Festool TS 75 eq // Ferrous blade for plate, profiles, steel clad doors, and more // Professional grade c-6 Carbide // Zero Degree hook angle // Kerf: 2.2mm // Size: Our FesPro blades were designed to produce industrial quality cuts at an affordable price with a Festool saw. They feature micro grain tungsten carbide tips, laser cut expansion slots, and a thin kerf. The long lasting C-6 carbide tips provide a long cutting life in ferrous metals such as plate, profiles, steel clad doors, and more. All trademarks and trade names are property of their respective owners...

-Titulo Original : Oshlun Sbnf-072540 7-1/4-inch 40 Tooth Tcg Saw Blade With 5/8-inch Arbor (diamond Knockout) For Aluminum And Non Ferrous Metals-Fabricante : Oshlun-Descripcion Original: Professional Grade C-1 Carbide // Negative Hook Angle // Triple Chip Tooth Grind // Precision Ground Carbide Tips // Heat Vents for Cooler Operation // Size: Our non ferrous metal blades have been designed with precision ground micro grain tungsten carbide tips and a triple chip tooth configuration. The specially formulated carbide lasts longer and leaves clean, burr free cuts in all types of non ferrous metals such as aluminum, copper, brass, bronze and even some plastics. Features heat vents for cooler operation. WARNING: Never attempt to cut ferrous metals with these blades. It is recommended that you use a coolant when cutting non ferrous metals. Proper clamping devices should be employed...

-Titulo Original : Oshlun Sbw-164060 16-5/16-inch 60 Tooth Beam Saw Atb Saw Blade With 1-inch Arbor-Fabricante : Oshlun-Descripcion Original: Super Thin Kerf for Fast Cuts // Professional Grade C-3 Carbide // Aggressive Hook Angle; Anti-Kickback Tooth Design // Copper Plugged Expansion Slots // Anti-Vibration Slots // Size: Our beam saw blade was designed for fast large capacity beam and timber cutting with the Makita 5402NA Beam Saw. The aggressive hook angle and thin kerf allows fast, clean cuts up to 6-1/4-Inch at 90° and 4-3/16-Inch at 45°. It features long lasting micro grain tungsten carbide tips, anti-vibration slots, an anti-kickback tooth design and expansion slots...

-Titulo Original : Oshlun Sbft-260068a 260mm 68 Tooth Fespro Non Ferrous Tcg Saw Blade With 30mm Arbor For Festool Kapex Ks 120-Fabricante : Oshlun-Descripcion Original: Fits: Festool Kapex KS 120 // Non Ferrous Blade for Aluminum, Brass, Copper, Plastics, and More // Professional Grade C-1 Carbide // Hook Angle: -5 Degree // Kerf: 2.5mm // Size: Product Description Our FesPro blades were designed to produce industrial quality cuts at an affordable price with a Festool saw. They feature micro grain tungsten carbide tips, laser cut expansion slots, and a thin kerf. The long lasting C-1 carbide tips provide a long cutting life in plastics and non ferrous metals such as aluminum. All trademarks and trade names are property of their respective owners. From the Manufacturer Our FesPro blades were designed to produce industrial quality cuts at an affordable price with a Festool saw. They feature micro grain tungsten carbide tips, laser cut expansion slots, and a thin kerf. The long lasting C-1 carbide tips provide a long cutting life in plastics and non ferrous metals such as aluminum. All trademarks and trade names are property of their respective owners...

-Titulo Original : Oshlun Sbft-210072a 210mm 72 Tooth Fespro Non Ferrous Tcg Saw Blade With 30mm Arbor For Festool Ts 75 Eq-Fabricante : Oshlun-Descripcion Original: Fits: Festool TS 75 EQ // Non Ferrous Blade for Aluminum, Brass, Copper, Plastics, and More // Professional Grade C-1 Carbide // Hook Angle: -5 Degree // Kerf: 2.4mm // Size: Product Description Our FesPro blades were designed to produce industrial quality cuts at an affordable price with a Festool saw. They feature micro grain tungsten carbide tips, laser cut expansion slots, and a thin kerf. The long lasting C-1 carbide tips provide a long cutting life in plastics and non ferrous metals such as aluminum. All trademarks and trade names are property of their respective owners. From the Manufacturer Our FesPro blades were designed to produce industrial quality cuts at an affordable price with a Festool saw. They feature micro grain tungsten carbide tips, laser cut expansion slots, and a thin kerf. The long lasting C-1 carbide tips provide a long cutting life in plastics and non ferrous metals such as aluminum. All trademarks and trade names are property of their respective owners...

-Titulo Original : Oshlun Sbft-160056a 160mm 56 Tooth Fespro Non Ferrous Tcg Saw Blade With 20mm Arbor For Festool Ts 55 Eq, Dewalt Dws520, And Makita Sp6000k-Fabricante : Oshlun-Descripcion Original: Fits: Festool TS 55 EQ or ATF 55 E, DeWalt DWS520 and Makita SP6000K // Non Ferrous Blade for Aluminum, Brass, Copper, Plastics, and More // Professional Grade C-1 Carbide // Hook Angle: -5 Degree // Kerf: 2.5mm // Size: Product Description Our FesPro blades were designed to produce industrial quality cuts at an affordable price with Festool, DeWalt, and Makita track saws. They feature micro grain tungsten carbide tips, laser cut expansion slots, and a thin kerf. The long lasting C-1 carbide tips provide a long cutting life in plastics and non ferrous metals such as aluminum. All trademarks and trade names are property of their respective owners. From the Manufacturer Our FesPro blades were designed to produce industrial quality cuts at an affordable price with Festool, DeWalt, and Makita track saws. They feature micro grain tungsten carbide tips, laser cut expansion slots, and a thin kerf. The long lasting C-1 carbide tips provide a long cutting life in plastics and non ferrous metals such as aluminum. All trademarks and trade names are property of their respective owners...

-Titulo Original : Oshlun Sbft-160028 160mm 28 Tooth Fespro General Purpose Atb Saw Blade With 20mm Arbor For Festool Ts 55 Eq, Dewalt Dws520, And Makita Sp6000k-Fabricante : Oshlun-Descripcion Original: Fits: Festool TS 55 EQ or ATF 55 E, DeWalt DWS520 and Makita SP6000K // Universal General Purpose Blade for Hardwood, Softwood, Plastics, and More // Professional Grade C-3 Carbide // Hook Angle: 15 Degree // Kerf: 2.5mm // Size: Product Description Our FesPro blades were designed to produce industrial quality cuts at an affordable price with a Festool, DeWalt, and Makita track saws. They feature micro grain tungsten carbide tips, laser cut expansion slots, and a thin kerf. The long lasting C-3 carbide tips are precision ground to ensure smooth cuts. All trademarks and trade names are property of their respective owners. From the Manufacturer Our FesPro blades were designed to produce industrial quality cuts at an affordable price with a Festool, DeWalt, and Makita track saws. They feature micro grain tungsten carbide tips, laser cut expansion slots, and a thin kerf. The long lasting C-3 carbide tips are precision ground to ensure smooth cuts. All trademarks and trade names are property of their respective owners...

-Titulo Original : Oshlun Sbf-072568 7-1/4-inch 68 Tooth Atb Saw Blade With 5/8-inch (diamond Knockout) For Thin Mild Steel And Ferrous Metals-Fabricante : Oshlun-Descripcion Original: Fits: Corded and Cordless Saws // Max RPM: 5,800 // Professional Grade C-6 Carbide // Positive Hook Angle // Alternate Top Bevel Tooth Grind // Size: Product Description Our ferrous metal blades have been designed with a durable carbide grade and special tooth grind which ensures an extended cutting life of all types of thin ferrous metals and mild steel, such as steel studs, sheet metal, conduit, and more. They can also be used for cutting non ferrous metals such as aluminum, copper and brass. The specially formulated C-6 micro grain carbide with titanium lasts longer and leaves a burr free cut with little to no sparks or dust, which are common when using abrasives. They can cut 5 to 10 times faster and last up to 30 times longer than abrasives, allowing fewer blade changes and increased production. The higher tooth count blades are better suited for thinner materials, while the lower tooth count blades are better for thicker materials. WARNING: Not recommended for cutting hardened materials. Never use on saws that run above the rated Maximum RPM. Proper clamping devices should be employed. All trademarks and tradenames are property of their respective owners. From the Manufacturer Our ferrous metal blades have been designed with a durable carbide grade and special tooth grind which ensures an extended cutting life of all types of thin ferrous metals and mild steel, such as steel studs, sheet metal, conduit, and more. They can also be used for cutting non ferrous metals such as aluminum, copper and brass. The specially formulated C-6 micro grain carbide with titanium lasts longer and leaves a burr free cut with little to no sparks or dust, which are common when using abrasives. They can cut 5 to 10 times faster and last up to 30 times longer than abrasives, allowing fewer blade changes and increased production. The higher tooth count blades are better suited for thinner materials, while the lower tooth count blades are better for thicker materials. WARNING: Not recommended for cutting hardened materials. Never use on saws that run above the rated Maximum RPM. Proper clamping devices should be employed. All trademarks and tradenames are property of their respective owners...

-Titulo Original : Oshlun Sbf-054030 5-3/8-inch 30 Tooth Mtcg Saw Blade With 20mm Arbor (5/8-inch And 10mm Bushings) For Mild Steel And Ferrous Metals-Fabricante : Oshlun-Descripcion Original: Fits: Bosch, DeWalt, Makita, Panasonic, Skil and 5-1/2-Inch Ryobi // Max RPM: 4,200 // Professional Grade C-6 Carbide // Positive Hook Angle // Modified Triple Chip Tooth Grind // Size: Product Description Our ferrous metal blades have been designed with a durable carbide grade and special tooth grind which ensures an extended cutting life of all types of ferrous metals and mild steel such as steel studs, angle iron, pipe, rebar, channel, flat stock and more. They can also be used for cutting non ferrous metals such as aluminum, copper and brass. The specially formulated C-6 micro grain carbide with titanium lasts longer and leaves a burr free cut with little to no sparks or dust, which are common when using abrasives. They can cut 5 to 10 times faster and last up to 30 times longer than abrasives, allowing fewer blade changes and increased production. The higher tooth count blades are better suited for thinner materials, while the lower tooth count blades are better for thicker materials. WARNING: Not recommended for cutting hardened materials. Never use on saws that run above the rated Maximum RPM. Proper clamping devices should be employed. All trademarks and tradenames are property of their respective owners. From the Manufacturer Our ferrous metal blades have been designed with a durable carbide grade and special tooth grind which ensures an extended cutting life of all types of ferrous metals and mild steel such as steel studs, angle iron, pipe, rebar, channel, flat stock and more. They can also be used for cutting non ferrous metals such as aluminum, copper and brass. The specially formulated C-6 micro grain carbide with titanium lasts longer and leaves a burr free cut with little to no sparks or dust, which are common when using abrasives. They can cut 5 to 10 times faster and last up to 30 times longer than abrasives, allowing fewer blade changes and increased production. The higher tooth count blades are better suited for thinner materials, while the lower tooth count blades are better for thicker materials. WARNING: Not recommended for cutting hardened materials. Never use on saws that run above the rated Maximum RPM. Proper clamping devices should be employed. All trademarks and tradenames are property of their respective owners...

-Titulo Original : Oshlun Sbw-055018 5-1/2-inch 18 Tooth Atb Fast Cutting And Trimming Saw Blade With 5/8-inch Arbor (1/2-inch And 10mm Bushings)-Fabricante : Oshlun-Descripcion Original: Super Thin Kerf for Fast Cuts // Fits: Makita, Craftsman, Skil, and Ryobi // Aggressive Hook Angle // Anti-Kickback Tooth Design // Professional Grade Carbide // Size: Product Description Our fast cutting and trimming blades have been designed to quickly cut all types of hardwood, softwood, and plywood with select portable saws. They feature an anti-kickback tooth design and precision ground micro grain carbide tips. The super thin kerf and aggressive hook angle allow for faster, easier cutting and extended battery life with cordless machines. All trademarks and tradenames are property of their respective owners. From the Manufacturer Our fast cutting and trimming blades have been designed to quickly cut all types of hardwood, softwood, and plywood with select portable saws. They feature an anti-kickback tooth design and precision ground micro grain carbide tips. The super thin kerf and aggressive hook angle allow for faster, easier cutting and extended battery life with cordless machines. All trademarks and tradenames are property of their respective owners...

-Titulo Original : Oshlun Sbw-054018 5-3/8-inch 18 Tooth Atb Fast Cutting And Trimming Saw Blade With 20mm Arbor (5/8-inch And 10mm Bushings)-Fabricante : Oshlun-Descripcion Original: Super Thin Kerf for Fast Cuts // Fits: DeWalt, Bosch, Black & Decker, Skil and Panasonic // Aggressive Hook Angle // Anti-Kickback Tooth Design // Professional Grade Carbide // Size: Product Description Our fast cutting and trimming blades have been designed to quickly cut all types of hardwood, softwood, and plywood with select portable saws. They feature an anti-kickback tooth design and precision ground micro grain carbide tips. The super thin kerf and aggressive hook angle allow for faster, easier cutting and extended battery life with cordless machines. All trademarks and tradenames are property of their respective owners. From the Manufacturer Our fast cutting and trimming blades have been designed to quickly cut all types of hardwood, softwood, and plywood with select portable saws. They feature an anti-kickback tooth design and precision ground micro grain carbide tips. The super thin kerf and aggressive hook angle allow for faster, easier cutting and extended battery life with cordless machines. All trademarks and tradenames are property of their respective owners...

-Titulo Original : Oshlun Sbr-120012 12-inch 12 Tooth Ftg Saw Blade With 1-inch Arbor (7/8-inch And 20mm Bushings) For Rescue And Demolition-Fabricante : Oshlun-Descripcion Original: Professional Grade C-1 Carbide // Flat Top Grind // Negative Hook Angle // Precision Ground Carbide Tips // Surface Ground for Uniform Thickness // Size: Product Description Our rescue and demolition blades feature a negative hook angle and impact resistant carbide tips. This allows them to cut through most building materials including roofing, shingles and non ferrous metals, as well as wood with embedded nails. These blades are very popular with firefighters for rescue operations and general demolition work. WARNING: ever use these blades on multi-purpose cutoff saws, including gas powered, unless the saw has a guard that completely covers both the upper and lower half of the blade. This guard must extend to the lowest point of the cutting teeth on the bottom of the blade. Read and follow all instructions that came with your machine. Use with extreme caution and care. From the Manufacturer Our rescue and demolition blades feature a negative hook angle and impact resistant carbide tips. This allows them to cut through most building materials including roofing, shingles and non ferrous metals, as well as wood with embedded nails. These blades are very popular with firefighters for rescue operations and general demolition work. WARNING: Never use these blades on multi-purpose cutoff saws, including gas powered, unless the saw has a guard that completely covers both the upper and lower half of the blade. This guard must extend to the lowest point of the cutting teeth on the bottom of the blade. Use with extreme caution and at your own risk...

-Titulo Original : Oshlun Sbft-210036 210mm 36 Tooth Fespro General Purpose Atb Saw Blade With 30mm Arbor For Festool Ts 75 Eq-Fabricante : Oshlun-Descripcion Original: Fits: Festool TS 75 EQ // Universal General Purpose Blade for Hardwood, Softwood, Plastics, and More // Professional Grade C-3 Carbide // Hook Angle: 15 degrees // Kerf: 2.4mm // Size: Product Description Our FesPro blades were designed to produce industrial quality cuts at an affordable price with a Festool saw. They feature micro grain tungsten carbide tips, laser cut expansion slots, and a thin kerf. The long lasting C-3 carbide tips are precision ground to ensure smooth cuts. All trademarks and trade names are property of their respective owners. From the Manufacturer Our FesPro blades were designed to produce industrial quality cuts at an affordable price with a Festool saw. They feature micro grain tungsten carbide tips, laser cut expansion slots, and a thin kerf. The long lasting C-3 carbide tips are precision ground to ensure smooth cuts...

-Titulo Original : Oshlun Sbnf-120080 12-inch 80 Tooth Tcg Saw Blade With 1-inch Arbor For Aluminum And Non Ferrous Metals-Fabricante : Oshlun-Descripcion Original: Professional Grade C-1 Carbide // Negative Hook Angle // Triple Chip Tooth Grind // Precision Ground Carbide Tips // Copper Plugged Expansion Slots // Size: Product Description Our non ferrous metal blades have been designed with precision ground micro grain tungsten carbide tips and a triple chip tooth configuration. The specially formulated carbide lasts longer and leaves clean, burr free cuts in all types of non ferrous metals such as aluminum, copper, brass, bronze and even some plastics. Features copper plugged expansion slots for reduced noise and vibration. WARNING: Never attempt to cut ferrous metals with these blades. It is recommended that you use a coolant when cutting non ferrous metals. Proper clamping devices should be employed. From the Manufacturer Our non ferrous metal blades have been designed with precision ground micro grain tungsten carbide tips and a triple chip tooth configuration. The specially formulated carbide lasts longer and leaves clean, burr free cuts in all types of non ferrous metals such as aluminum, copper, brass, bronze and even some plastics. Blade features copper plugged expansion slots for reduced noise and vibration. WARNING: Never attempt to cut ferrous metals with these blades. It is recommended that you use a coolant when cutting non ferrous metals. Proper clamping devices should be employed...

-Titulo Original : Oshlun Baw-100040 10-inch 40 Tooth Builders Ace General Purpose Atb Saw Blade With 5/8-inch Arbor-Fabricante : Oshlun-Descripcion Original: Thin kerf for fast cuts // Construction grade C-2 carbide // Aggressive hook angle // Precision ground carbide tips // Alternate top bevel grind // Size: Product Description Our Builder’s Ace Series blades were designed for quality cuts at an affordable price. They feature C-2 tungsten carbide tips, expansion slots, and a thin kerf for faster cutting. Your best inexpensive blade option. From the Manufacturer Our Builder’s Ace Series blades were designed for quality cuts at an affordable price. They feature C-2 tungsten carbide tips, expansion slots, and a thin kerf for faster cutting. Your best inexpensive blade option...

-Titulo Original : Oshlun Sbnf-100060 10-inch 60 Tooth Tcg Saw Blade With 5/8-inch Arbor For Aluminum And Non Ferrous Metals-Fabricante : Oshlun-Descripcion Original: Professional Grade C-1 Carbide // Negative Hook Angle // Triple Chip Tooth Grind // Precision Ground Carbide Tips // Copper Plugged Expansion Slots // Size: Product Description Our non ferrous metal blades have been designed with precision ground micro grain tungsten carbide tips and a triple chip tooth configuration. The specially formulated carbide lasts longer and leaves clean, burr free cuts in all types of non ferrous metals such as aluminum, copper, brass, bronze and even some plastics. Features copper plugged expansion slots for reduced noise and vibration. WARNING: Never attempt to cut ferrous metals with these blades. It is recommended that you use a coolant when cutting non ferrous metals. Proper clamping devices should be employed. From the Manufacturer Our non ferrous metal blades have been designed with precision ground micro grain tungsten carbide tips and a triple chip tooth configuration. The specially formulated carbide lasts longer and leaves clean, burr free cuts in all types of non ferrous metals such as aluminum, copper, brass, bronze and even some plastics. The 10-Inch and larger also feature copper plugged expansion slots for reduced noise and vibration while the 7-1/4-Inch features heat vents for cooler operation. Warning: Never attempt to cut ferrous metals with these blades. It is recommended that you use a coolant when cutting non ferrous metals. Proper clamping devices should be employe...

-Titulo Original : Oshlun Sbw-065024 6-1/2-inch 24 Tooth Atb General Purpose And Framing Saw Blade With 5/8-inch Arbor (diamond Knockout)-Fabricante : Oshlun-Descripcion Original: Super Thin Kerf for Fast Cuts // Professional Grade Carbide // Anti-Kickback Tooth Design // Expansion Slots to Prevent Warping // Precision Ground Carbide Tips // Size: Product Description Our general purpose and framing blades have been designed for quick, clean cutting with various portable saws. They are ideal for cutting of all types of hardwood, softwood, particle board and plywood. The aggressive hook angle and super thin kerf make for fast and easy cutting. Other features include an anti-kickback tooth design for added safety and heat vents for cooler operation resulting in extended blade life. The long lasting micro grain carbide is precision ground to ensure the best possible cut. From the Manufacturer Our general purpose and framing blades have been designed for quick, clean cutting with various portable saws. They are ideal for cutting of all types of hardwood, softwood, particle board and plywood. The aggressive hook angle and super thin kerf make for fast and easy cutting. Other features include an anti-kickback tooth design for added safety and heat vents for cooler operation resulting in extended blade life. The long lasting micro grain carbide is precision ground to ensure the best possible cut...

-Titulo Original : Oshlun Sbw-072524 7-1/4-inch 24 Tooth Atb General Purpose And Framing Saw Blade With 5/8-inch Arbor (diamond Knockout)-Fabricante : Oshlun-Descripcion Original: Super Thin Kerf for Fast Cuts // Professional Grade Carbide // Heat Vents for Cooler Operation // Anti-Kickback Tooth Design // Expansion Slots to Prevent Warping // Size: Product Description Our general purpose and framing blades have been designed for quick, clean cutting with various portable saws. They are ideal for cutting of all types of hardwood, softwood, particle board and plywood. The aggressive hook angle and super thin kerf make for fast and easy cutting. Other features include an anti-kickback tooth design for added safety and heat vents for cooler operation resulting in extended blade life. The long lasting micro grain carbide is precision ground to ensure the best possible cut. From the Manufacturer Our general purpose and framing blades have been designed for quick, clean cutting with various portable saws. They are ideal for cutting of all types of hardwood, softwood, particle board and plywood. The aggressive hook angle and super thin kerf make for fast and easy cutting. Other features include an anti-kickback tooth design for added safety and heat vents for cooler operation resulting in extended blade life. The long lasting micro grain carbide is precision ground to ensure the best possible cut...

-Titulo Original : Oshlun Sbw-082524 8-1/4-inch 24 Tooth Atb General Purpose And Framing Saw Blade With 5/8-inch Arbor (diamond Knockout)-Fabricante : Oshlun-Descripcion Original: Super Thin Kerf for Fast Cuts // Professional Grade Carbide // Heat Vents for Cooler Operation // Anti-Kickback Tooth Design // Expansion Slots to Prevent Warping // Size: Product Description Our general purpose and framing blades have been designed for quick, clean cutting with various portable saws. They are ideal for cutting of all types of hardwood, softwood, particle board and plywood. The aggressive hook angle and super thin kerf make for fast and easy cutting. Other features include an anti-kickback tooth design for added safety and heat vents for cooler operation resulting in extended blade life. The long lasting micro grain carbide is precision ground to ensure the best possible cut. From the Manufacturer Our general purpose and framing blades have been designed for quick, clean cutting with various portable saws. They are ideal for cutting of all types of hardwood, softwood, particle board and plywood. The aggressive hook angle and super thin kerf make for fast and easy cutting. Other features include an anti-kickback tooth design for added safety and heat vents for cooler operation resulting in extended blade life. The long lasting micro grain carbide is precision ground to ensure the best possible cut...

-Titulo Original : Oshlun Sbw-055024 5-1/2-inch 24 Tooth Atb General Purpose And Trimming Saw Blade With 5/8-inch Arbor (1/2-inch And 10mm Bushings)-Fabricante : Oshlun-Descripcion Original: Super Thin Kerf for Fast Cuts // Fits: Makita, Craftsman, Skil and Ryobi // Aggressive Hook Angle // Professional Grade Carbide // Precision Ground Carbide Tips // Size: Product Description Our general purpose and trimming blades have been designed for quick, clean cutting with various portable saws. They are ideal for cutting all types of hardwood, softwood and plywood. The super thin kerf and aggressive hook angle allow for faster, easier cutting and an extended battery life with cordless saws. The long lasting micro grain carbide is precision ground to ensure the best possible cut. From the Manufacturer Our general purpose and trimming blades have been designed for quick, clean cutting with various portable saws. They are ideal for cutting all types of hardwood, softwood and plywood. The super thin kerf and aggressive hook angle allow for faster, easier cutting and an extended battery life with cordless saws. The long lasting micro grain carbide is precision ground to ensure the best possible cut...

-Titulo Original : Oshlun Sbf-072552 7-1/4-inch 52 Tooth Tcg Saw Blade With 5/8-inch (diamond Knockout) For Mild Steel And Ferrous Metals-Fabricante : Oshlun-Descripcion Original: Fits: Corded and Cordless Saws // Max RPM: 5,800 // Professional Grade C-6 Carbide // Laser Cut Expansion Slots // Triple Chip Tooth Grind // Size: Product Description Our ferrous metal blades have been designed with a durable carbide grade and triple chip tooth grind which ensures an extended cutting life of all types of ferrous metals (mild steel) such as steel studs, angle iron, pipe, rebar, channel, flat stock and more. They can also be used for cutting non ferrous metals such as aluminum, copper and brass. The specially formulated C-6 micro grain carbide with titanium lasts longer and leaves a burr free cut with little to no sparks or dust, which are common when using abrasives. They can cut 5 to 10 times faster and last up to 30 times longer than abrasives, allowing fewer blade changes and increased production. The higher tooth count blades are better suited for thinner materials, while the lower tooth count blades are better for thicker materials. WARNING: Not recommended for cutting hardened materials. Never use on saws that run above the rated Max RPM. Proper clamping devices should be employed. From the Manufacturer Our ferrous metal blades have been designed with a durable carbide grade and triple chip tooth grind which ensures an extended cutting life of all types of ferrous metals (mild steel) such as steel studs, angle iron, pipe, rebar, channel, flat stock and more. They can also be used for cutting non ferrous metals such as aluminum, copper and brass. The specially formulated C-6 micro grain carbide with titanium lasts longer and leaves a burr free cut with little to no sparks or dust, which are common when using abrasives. They can cut 5 to 10 times faster and last up to 30 times longer than abrasives, allowing fewer blade changes and increased production. The higher tooth count blades are better suited for thinner materials, while the lower tooth count blades are better for thicker materials. WARNING: Not recommended for cutting hardened materials. Never use on saws that run above the rated Max RPM. Proper clamping devices should be employed...

-Titulo Original : Oshlun Sbf-072536 7-1/4-inch 36 Tooth Tcg Saw Blade With 5/8-inch Arbor (diamond Knockout) For Mild Steel And Ferrous Metals-Fabricante : Oshlun-Descripcion Original: Fits: Corded and Cordless Saws // Max RPM: 5,800 // Professional Grade C-6 Carbide // Laser Cut Expansion Slots // Triple Chip Tooth Grind // Size: Product Description Our ferrous metal blades have been designed with a durable carbide grade and triple chip tooth grind which ensures an extended cutting life of all types of ferrous metals (mild steel) such as steel studs, angle iron, pipe, rebar, channel, flat stock and more. They can also be used for cutting non ferrous metals such as aluminum, copper and brass. The specially formulated C-6 micro grain carbide with titanium lasts longer and leaves a burr free cut with little to no sparks or dust, which are common when using abrasives. They can cut 5 to 10 times faster and last up to 30 times longer than abrasives, allowing fewer blade changes and increased production. The higher tooth count blades are better suited for thinner materials, while the lower tooth count blades are better for thicker materials. WARNING: Not recommended for cutting hardened materials. Never use on saws that run above the rated Max RPM. Proper clamping devices should be employed. From the Manufacturer Our ferrous metal blades have been designed with a durable carbide grade and triple chip tooth grind which ensures an extended cutting life of all types of ferrous metals (mild steel) such as steel studs, angle iron, pipe, rebar, channel, flat stock and more. They can also be used for cutting non ferrous metals such as aluminum, copper and brass. The specially formulated C-6 micro grain carbide with titanium lasts longer and leaves a burr free cut with little to no sparks or dust, which are common when using abrasives. They can cut 5 to 10 times faster and last up to 30 times longer than abrasives, allowing fewer blade changes and increased production. The higher tooth count blades are better suited for thinner materials, while the lower tooth count blades are better for thicker materials. WARNING: Not recommended for cutting hardened materials. Never use on saws that run above the rated Max RPM. Proper clamping devices should be employed...