-Titulo Original : 2 in X 24 in Anti-Slip/Glow-in-Dark Tape - Premium 15 Pre-Cut Strips, 80 Grit Anti Slip Adhesive Grip and Prevents Risk for Stairs or Other Safety Needs (15 Pack 2019)-Fabricante : ONTWIE-Descripcion Original: Slip Resistant Safety Treads: Ideal for places like stairs and other slippery surfaces where you are prone to fall and hurt yourselves // Enhanced Visibility: Just 30 minutes of exposure when near a UV light source, these fluorescent strip can illuminate the local area up to 7-9 hours! Improve visibility during night. // Place it Anywhere: Silicone adhesive and anti slip layer can withstand outdoor weather conditions, 2’’x24’’x15 Pre-cut strips rounded corners, making the non skid safety black tape ideal for staircase, treads, steps, ladders with easy application! // SUPERIOR QUALITY: The grip tapes are made up of superior quality material that doesn’t easily wear or tear, and also requires negligible maintenance after installation. Also, 80 grit aluminum oxide granules provides the heavy duty grip and traction you need in those slippery high traffic areas. More importantly, the tapes do not compromise aesthetics of a place yet give you considerably improved safety levels. // What We Offer: These safety treads will help reduce slips and fall. 5 Years warranty and return service are provided by ONTWIE. You’ll receive a beautiful fresh roll, no mess, no hassle. //   The Anti Slip Tape is great for indoor and outdoor usage . Whether it's to make a loading dock more secure, or just to have peace of mind on your front steps, Non-Slip Tape can Helps Prevent Slips And Falls to care for your family, friends and you.    PET base layer injected with 80 grit aluminum oxide compound boosts foot to surface stability  Extra strong acrylic   Paper    1.Ensure that the surface is completely free from dust and grease. The best cleaning medium is a solvent such as isopropyl alcohol applied with a clean cloth.The surface should be dry and free from any loose particles. Prime and seal unpainted wood and concrete surfaces. 2.Peel release paper and place in desired location.  (When the temperature is low, please slowly heated with a hair dryer, and gum with good results)  3.To attain the optimum bond,sufficient pressure should be applied evenly to the surface ,starting from the centre of the tape strip and work towards the ends.  (Dry for 24 hours on first use)  Do NOT use on surfaces that is dirty, oily, uneven, rugged, rough, dusty, grimy, sandy, muddy, wet, watery. This tape is not meant for under water use or water submersion...

-Titulo Original : 4 Inch X 16.4ft Non Slip Safety Grip Tape for Stairs Steps Non Skid Tread High Traction Friction/Strong Grip Abrasive Adhesive Hazard Caution Tape- Black/Yellow-Fabricante : ONTWIE-Descripcion Original: Generous Size: 4 inch Width X 16.4 feet Length Roll // Apply Non Slip Tape To Provide 80 Grit Traction On Surface, Which Provides Great Coefficient Of Friction In Both Industrial And Commercial Environment, And Helps Prevent Dangerous Falls And Accidents On Slippery Floors And Steps // The Non Slip Tape Is Coated An Aggressive Permanent Adhesive, Strong Self-Adhesive Backing Adheres To Variety Of Surfaces - Tile, Stone, Concrete, Metal ,Wood // Silicone Adhesive And Anti Slip Layer Can Withstand Outdoor Weather Conditions, Making The Non Skid Safety Tape Ideal For Staircase, Treads, Steps, Ladders, Ramps, Scaffolding, Buses, Trailers, Etc. // Hazard Caution Sign For Staircase, Treads, Steps, Ladders, Ramps, Scaffolding, Buses, Trailers, Etc. //   The Anti Slip Tape is great for indoor and outdoor usage . Whether it's to make a loading dock more secure, or just to have peace of mind on your front steps, Non-Slip Tape can Helps Prevent Slips And Falls to care for your family, friends and you.    PVC base layer injected with 80 grit aluminum oxide compound boosts foot to surface stability  Extra strong acrylic   Paper    1.Ensure that the surface is completely free from dust and grease. The best cleaning medium is a solvent such as isopropyl alcohol applied with a clean cloth.The surface should be dry and free from any loose particles. Prime and seal unpainted wood and concrete surfaces.  2.Cut the tape to the desired length and round the corners with scissors.  （There is a tape measure with the goods） 3.Peel release paper and place in desired location.  (When the temperature is low, please slowly heated with a hair dryer, and gum with good results)  4.To attain the optimum bond,sufficient pressure should be applied evenly to the surface ,starting from the centre of the tape strip and work towards the ends.  (Dry for 24 hours on first use)  Cut The Rounded Coners With Scissors First, Which Will Help To Improve The Use Of Anti-Skid Tape, And It Won't Tear Easily 1. We have been specializing in anti slip tape for 10 years!  2. Our products are designed and tested in U.S.A.  3. 100% Risk-Free Satisfaction Guarantee 4. Return service are provided by ONTWI...