290,242 ventas concretadas desde abril 2017.
011-3221-3652 
+54-911-2290-6553
Componentes Electrónicos > Semiconductores > Circuitos Integrados
Mostrar del 73 al 96 (de 178 productos)
-
Precio: $55,949.00 -
Precio: $45,699.00 -
Precio: $58,239.00 -
Precio: $60,529.00
-
Precio: $54,339.00 -
Expira:
12/12/2021Precio: $120,249.00 -
Precio: $86,519.00 -
Precio: $121,899.00
-
Expira:
06/04/2023Precio: $84,829.00 -
Precio: $27,919.00 -
Precio: $90,379.00 -
Precio: $47,599.00
-
Precio: $36,389.00 -
Precio: $50,289.00 -
Precio: $46,349.00 -
Expira:
07/08/2021Precio: $38,309.00
-
Precio: $46,349.00 -
![Adafruit EL Wire 2xAA Pocket Inverter [ADA317]](https://images-na.ssl-images-amazon.com/images/I/41fmwvdh06L.jpg "Adafruit EL Wire 2xAA Pocket Inverter [ADA317]")
Precio: $54,389.00 -
Expira:
03/05/2021Precio: $55,549.00 -
Expira:
24/02/2023Precio: $70,009.00
-
Precio: $92,619.00 -
Expira:
06/05/2023Precio: $26,509.00 -
Precio: $140,339.00 -
Precio: $120,409.00
-
Precio: $55,949.00
Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor
-Titulo Original : Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor-Fabricante : ADAFRUIT-Descripcion Original: This breakout is chock full o' sensors! Add basic gesture sensing, RGB color sensing, proximity sensing, or ambient light sensing to your project with the Adafruit APDS9960 Proximity, Light, RGB and Gesture Sensor. When connected to your microcontroller (running our library code) it can detect simple gestures (left to right, right to left, up to down, down to up are currently supported), return the amount of red, blue, green, and clear light, or return how close an object is to the front of the sensor. This device uses an I2C interface so it's easy to wire up and use. The APDS9960 from Avago Technologies has an integrated IR LED and driver, along with four directional photodiodes that sense reflected IR energy from the LED. It's proximity detection feature allows it to measure the distance an object is from the front of the sensor (up to a few centimeters) with 8 bit resolution... -
Precio: $45,699.00
Adafruit Assembled Pi Cobbler Plus - Breakout Cable - for Pi
-Titulo Original : Adafruit Assembled Pi Cobbler Plus - Breakout Cable - for Pi B+/A+/Pi 2/Pi 3-Fabricante : ADAFRUIT-Descripcion Original: - //... -
Precio: $58,239.00
Adafruit Audio Ic Development Tools Mono 2.5w Class D Audio
-Titulo Original : Audio IC Development Tools Adafruit Mono 2.5W Class D Audio Amplifier - PAM8302 (1 piece)-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2130 // Stock Type: Breakout Boards >> Amplifiers/Sound // In Stock & Ready to Ship // This super small mono amplifier is surprisingly powerful - able to deliver up to 2.5 Watts into 4-8 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.0V-5.5VDC. Since the amp is a class D, its very efficient (over 90% efficient when driving an 8Î speaker at over half a Watt) - making it perfect for portable and battery-powered projects. It has built in thermal and over-current protection but we could barely tell it got hot. There's even a volume trim pot so you can adjust the volume on the board down from the default 24dB gain. This board is a welcome upgrade to basic LM386 amps! The A+ and A- inputs of the amplifier go through 1.0uF capacitors, so they are fully 'differential' - if you don't have differential outputs, simply tie the Audio- pin to ground. The output is Bridge Tied - that means the output pins connect directly to the speaker pins, no connection to ground. The output is a high frequency 250KHz square wave PWM that is then 'averaged out' by the speaker coil - the high frequencies are not heard. All the above means that you can't connect the output into another amplifier, it should drive the speakers directly. Comes with a fully assembled and tested breakout board. We also include header to plug it into a breadboard and a 3.5mm screw-terminal blocks so you can easily attach/detach your speaker. You will be ready to rock in 15 minutes! Output Power: 2.5W at 4Î, 10% THD, 1.5W at 8Î, 10% THD, with 5.5V Supply50dB PSRR at 1KHzFilterless design, with ferrite bead + capacitors on output.Fixed 24dB gain, onboard trim potentiometer for adjusting input volume.Thermal and short-circuit/over-current protectionLow current draw: 4mA quiescent and 1uA in shutdown mod... -
Precio: $60,529.00
Adafruit Audio IC Development Tools Stereo 2.8W Class D Audi
-Titulo Original : Audio IC Development Tools Stereo 2.8W Class D Audio Amplifier - I2C Control AGC - TPA2016 (1 piece)-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1712 // Stock Type: Breakout Boards >> Amplifiers/Sound // In Stock & Ready to Ship // A mini class D with AGC and I2C control? Yes please! This incredibly small stereo amplifier is surprisingly powerful. It is able to deliver 2 x 2.8W channels into 4 ohm impedance speakers (@ 10% THD) and it has a i2c control interface as well as an AGC (automatic gain control) system to keep your audio from clipping or distorting. If you don't want to use I2C to control it, it does start up on with 6dB gain by default and the AGC set up for most music playing. We do suggest using it with a microcontroller to configure it, however, since its quite powerful. Settings are not stored in the chip, so you'll need to adjust any gain & AGC amplification settings every time the amp is powered up. Inside the miniature chip is a class D controller, able to run from 2.7V-5.5VDC. Since the amp is a class D, it's incredibly efficient (89% efficient when driving an 8Ω speaker at 1.5 Watt) - making it perfect for portable and battery-powered projects. It has built in thermal and over-current protection but we could barely tell if it got hot. This board is a welcome upgrade to basic LM386 amps! The inputs of the amplifier go through 1.0uF capacitors, so they are fully 'differential' - if you don't have differential outputs, simply tie the R- and L- to ground. The outputs are Bridge Tied - that means they connect directly to the outputs, no connection to ground. The output is a ~300KHz square wave PWM that is then 'averaged out' by the speaker coil - the high frequencies are not heard. All the above means that you can't connect the output into another amplifier, it should drive the speakers directly. Comes with a fully assembled and tested breakout board with 1.0uF input capacitors. We also include 3.5mm screw-terminal blocks so you can easily attach/detach your speakers, and some header in case you want to plug it into a breadboard. Speakers are not includ...
-
Precio: $54,339.00
Adafruit Audio IC Development Tools Stereo 3.7W Class D Audi
-Titulo Original : Audio IC Development Tools Stereo 3.7W Class D Audio Amplifier (1 Piece)-Fabricante : ADAFRUIT-Descripcion Original: Price For: Pack of 1 Manufacturer: Adafruit Product Category: Audio IC Development Tools RoHS: Brand: Adafruit Packaging: Bulk // This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 3.7W channels into 3 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.7V-5.5VDC. Since the amp is a class D, its incredibly efficient (over 90% efficient when driving an 8Ω speaker at over a Watt) - making it perfect for portable and battery-powered projects. It has built in thermal and over-current protection but we could barely tell it got hot. This board is a welcome upgrade to basic LM386 amps! The inputs of the amplifier go through 1.0uF capacitors, so they are fully 'differential' - if you don't have differential outputs, simply tie the R- and L- to ground. The outputs are Bridge Tied - that means they connect directly to the outputs, no connection to ground. The output is a 360KHz square wave PWM that is then 'averaged out' by the speaker coil - the high frequencies are not heard. All the above means that you can't connect the output into another amplifier, it should drive the speakers directly. Comes with a fully assembled and tested breakout board with 1.0uF input capacitors. We also include header to plug it into a breadboard, 3.5mm screw-terminal blocks so you can easily attach/detach your speakers, and a 2x4 header + jumper to change the amplifier gain on the fly. You will be ready to rock in 15 minutes! Speakers are not included, use any 3ohm or greater impedance speakers... -
Precio: $120,249.00Expira: 12/12/2021
Adafruit Bluefruit Le Sniffer - Bluetooth Low Energy (ble 4
-Titulo Original : Adafruit Bluefruit LE Sniffer - Bluetooth Low Energy (BLE 4.0) - nRF51822 - v2.0 [ADA2269]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2269 // Stock Type: Wireless >> Bluetooth // In Stock & Ready to Ship // Interested in learning how Bluetooth Low Energy works down to the packet level? Debugging your own BLE hardware, and trying to spot where something is going wrong? Or maybe you're writing a custom application for your phone or tablet that needs to talk to existing BLE hardware, but you don't know how it works beneath the surface? We have the perfect tool for you!This Bluefruit LE Friend is programmed with a special firmware image that turns it into an easy to use Bluetooth Low Energy sniffer. You can passively capture data exchanges between two BLE devices, pushing the data into Wireshark, the open source network analysis tool, where you can visualize things on a packet level, with useful descriptors to help you make sense of the values without having to crack open the 2000 page Bluetooth 4.0 Core Specification every time.Plug it into your development machine, fire up the special sniffer bridge SW, select the device you want to sniff, and it will fire up Wireshark for you and start pushing data in via a live stream (using Nordic's Windows software), or save to a pcap file that you can analyze with Wireshark later. Please Note : You can only use this device to listen on Bluetooth Low Energy devices! It will not work on Bluetooth (classic) devices. The Nordic Wireshark-streaming sniffer software is currently Windows only. We have example code using the python API that will work on any OS to log the sniffed data to a pcap file for analysis so you can use this sniffer with any OS with python.The sniffer firmware cannot be used with the the Nordic DFU bootloader firmware, which means that if you want to reprogram this devices you must use a J-Link (and, likely, a SWD adapter + SWD Breakout ) You cannot over-the-air reprogram it. Check out our tutorial for more details and software downloads... -
Precio: $86,519.00
Adafruit Bluefruit LE UART Friend - Bluetooth Low Energy (BL
-Titulo Original : Adafruit Bluefruit LE UART Friend - Bluetooth Low Energy (BLE)-Fabricante : ADAFRUIT-Descripcion Original: Add bluetooth support to your project easily using this easy to use module from Adafruit // Download the free iOS and Android App by Adafruit to get started quickly // High quality module with custom firmware written by Adafruit. Having issues? This product is fully supported by Adafruit! // Full control over the device // Would you like to add powerful and easy-to-use Bluetooth Low Energy to your robot, art or other electronics project? Heck yeah! With BLE now included in modern smart phones and tablets, its fun to add wireless connectivity. So what you really need is the new Adafruit Bluefruit LE UART Friend! The Bluefruit LE UART Friend makes it easy to add Bluetooth Low Energy connectivity to anything with a hardware or software serial port. We even have nice hardware flow control so you won't have to think about losing data. Connect to your Arduino or other microcontroller or even just a standard FTDI cable for debugging and testing. This multi-function module can do quite a lot! For most people, they'll be very happy to use the standard Nordic UART RX/TX connection profile. In this profile, the Bluefruit acts as a data pipe, that can 'transparently' transmit back and forth from your iOS or Android device. You can use our iOS App or Android App, or write your own to communicate with the UART service. Download Adafruit's free Android/iOS app and you're ready to rock... -
Precio: $121,899.00
Adafruit Bluetooth / 802.15.1 Development Tools Feather M0 B
-Titulo Original : Bluetooth / 802.15.1 Development Tools Adafruit Feather M0 Bluefruit LE-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2995 // Stock Type: Development Boards >> Feather >> Boards // In Stock & Ready to Ship // Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores.This is the Adafruit Feather M0 Bluefruit LE - our take on an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built in USB and battery charging. Its an Adafruit Feather M0 with a BTLE module, ready to rock! We have other boards in the Feather family, check'em out here. Bluetooth Low Energy is the hottest new low-power, 2.4GHz spectrum wireless protocol. In particular, its the only wireless protocol that you can use with iOS without needing special certification and it's supported by all modern smart phones. This makes it excellent for use in portable projects that will make use of an iOS or Android phone or tablet. It also is supported in Mac OS X and Windows 8+.At the Feather M0's heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero . This chip has a whopping 256K of FLASH (8x more than the Atmega328 or 32u4) and 32K of RAM (16x as much)! This chip comes with built in USB so it has USB-to-Serial program & debug capability built in with no need for an FTDI-like chip.To make it easy to use for portable projects, we added a connector for any of our 3.7V Lithium polymer batteries and built in battery charging. You don't need a battery, it will run just fine straight from the micro USB connector. But, if you do have a battery, you can take it on the go, then plug in the USB to recharge. The Feather will automatically switch over to USB power when its available. We also tied the battery thru a divider to an analog pin, so you can measure and monitor the battery voltage to detect when you need a recharge. Here's some handy specs! Like all Feather M0's you get: Measures 2.0 x 0.9...
-
Precio: $84,829.00Expira: 06/04/2023
Adafruit Bluetooth 4.0 USB Module (v2.1 Back-Compatible) [AD
-Titulo Original : Adafruit Bluetooth 4.0 USB Module (v2.1 Back-Compatible) [ADA1327]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1327 // Stock Type: Wireless >> Bluetooth // In Stock & Ready to Ship // Add Bluetooth capability to your computer super fast with a USB BT 4.0 adapter. This adapter is backwards compatible with v2.1 and earlier, but also supports the latest v4.0/Bluetooth Low Energy. Inside lies a CSR8510 Bluetooth USB host. We've used this with great success on a Windows 7 computer, installing as a 'generic' Bluetooth device, but we expect it to work just fine with any modern computer as this chipset is very common. So far we've tested it to communicate with Bluetooth data modules only. Revision note: As of Friday, August 28th, 2015 these now have unique MAC addresses! That's great because now you don't have to worry about using two or more of them at once, handy for people turning these into beacons. Drivers for CSR Bluetooth modules are built into Windows XP/7/8/10 so you do not need to install any software or download anything: other bluetooth drivers or 'stacks' such as BlueSoleil are not as good as the Windows stack and will cause problems. Just plug it in and let windows auto-install the BT driver, it may take a few minutes! For Linux, use Bluez which works great, our Pi tutorial will be similar to your favorite distro Bluetooth 4.0 USB Module (v2.1 Back-Compatible) ( 3:32 ... -
Precio: $27,919.00
Adafruit Breadboard-friendly Midi Jack (5-pin Din) [ada1134
-Titulo Original : Adafruit Breadboard-friendly MIDI Jack (5-pin DIN) [ADA1134]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1134 // Stock Type: Components & Parts >> Sockets/Connectors // In Stock & Ready to Ship // To celebrate the 30th Anniversary of the invention of MIDI we're carrying these handy 5-pin MIDI jacks. They're what you see on the back of nearly every synthesizer and drum machine. These are nice sturdy jacks, and breadboard-friendly, with all the pins on 0.1 spacing for easy wiring. This handy tutorial and wiring diagram will show you how to easily turn your Arduino into a MIDI controller! Also compatible with DINSYNC cables, if you have a really old drum machine... -
Precio: $90,379.00
Adafruit Circuit Playground Classic
-Titulo Original : Circuit Playground Classic-Fabricante : ADAFRUIT-Descripcion Original: Circuit Playground, featuring ATMega32U4 is designed to be used with Arduino IDE and code.org CS Discoveries // ATmega32u4 Processor, running at 3.3V and 8MHz. MicroUSB port for programming and debugging with Arduino IDE // The Circuit Playground has USB HID support, so it can act like a mouse or keyboard and attach directly to computers. // Green "ON" LED so you know its powered // Red "#13" LED for basic blinking // Would you like to learn electronics, with an all-in-one board that has sensors and LEDs built in? Circuit Playground is here - and it's the best way to practice programming on real hardware with no soldering or sewing required! This is the Classic version of Circuit Playground, which comes with an ATmega32u4. It's designed to be used with Arduino IDE and code.org CS Discoveries only. It even comes with Firmata already programmed in, so you can use it immediately with code.org Discoveries without any preparation or updates. If you would like to use MakeCode or CircuitPython, check out Circuit Playground Express, which can be used with MakeCode, CircuitPython or Arduino. Circuit Playground features an ATmega32u4 processor (3.3V @ 8MHz), just like our popular Flora. The board's also round and has alligator-clip pads around it so you don't have to solder or sew to make it work. You can power it from USB, a AAA battery pack, or with a Lipoly battery (for advanced users). Just program your code into the board then take it on the go! MicroUSB port for programming and debugging with Arduino IDE USB port can act like serial port, keyboard, mouse, joystick or MIDI Circuit Playground has built-in USB support. Built in USB means you plug it in to program it and it just shows up. All you really need is a Micro-B data/sync USB cable - not included! With the new 1.6.4+ Arduino IDE, it takes only a few seconds to add support. The Circuit Playground has USB HID support, so it can act like a mouse or keyboard and attach directly to computers. Features: 10 x mini NeoPixels, each one can display any color Motion sensor Temperature sensor Light sensor Sound sensor Mini speaker 2 x Push buttons Slide switch 8 x alligator-clip friendly input/output pins I2C, UART, and 4 pins that can do analog inputs/PWM output All 8 pads can act as capacitive touch inputs Reset butto... -
Precio: $47,599.00
Adafruit Colorful Square Tactile Button Switch Assortment -
-Titulo Original : Adafruit Colorful Square Tactile Button Switch Assortment - 15 Pack [ADA1010]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1010 // Stock Type: Components & Parts >> Switches // In Stock & Ready to Ship // Little clicky switches are standard input buttons on electronic projects. These work best in a PCB but can be used on a solderless breadboard as shown in this tutorial . The pins are normally open (disconnected) and when the button is pressed they are momentarily closed. These buttons are bigger than the 6mm ones we carry, and come in a pack of 15. Each button comes with a candy-colored square cap that snaps on. You get three of each color-- blue, grey, yellow, green, and red. The square plastic button tops affix easily to the tactile switch body...
-
Precio: $36,389.00
Adafruit Conductive Fiber - Stainless Steel 20um - 10 grams
-Titulo Original : Adafruit Conductive Fiber - Stainless Steel 20um - 10 grams [ADA1088]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1088 // Stock Type: Wearables >> Materials >> Other // In Stock & Ready to Ship // This conductive fiber is super interesting! It's great for felting and could also be spun into yarn if that's your thing. We tested many different fiber thicknesses for needle felting and found that this one (20um fiber thickness) is the most pleasurable to work with. Use about 0.2g of the stuff to make a felt touch button suitable for use with the MaKey MaKey or capacitive touch sensing circuit. Make felt controllers or felt buttons onto an existing wool sweater! You can also make a squeeze/pressure sensor with this fiber, as it becomes less resistive the more you squeeze the fibers together. Make sure to combine this fiber with a natural animal fiber (which have scales) for best results. We think 10g is the perfect amount and will get you through several projects. MaKey MaKey and alligator clips not included... -
Precio: $50,289.00
Adafruit Drv8871 Dc Motor Driver Breakout Board - 3.6a Max
-Titulo Original : Adafruit DRV8871 DC Motor Driver Breakout Board - 3.6A Max-Fabricante : ADAFRUIT-Descripcion Original: Crank up your robotics with powerful Adafruit DRV8871 motor driver breakout board. This motor driver has a lot of great specs that make it useful for a wide variety of mechatronics. In particular, the simple resistor-set current limiting and auto-magic PWM support make it super easy to use with just about any brushed DC motor. Check out the specs for the DRV8871: 6.5V to 45V motor power voltage Up to 5.5V logic level on IN pins 565mΩ Typical RDS(on) (high + low) 3.6A peak current PWM control Current limiting/regulation without an inline sense resistor Undervoltage lockout Overcurrent protection Thermal shutdown Using it is super simple. Connect your motor to the OUT terminal block. Power the board with 6.5-45VDC power on VMotor and provide the H-bridge input control on IN1 and IN2. You can even PWM the inputs and the driver chip will do the right thing. You can set the current limiting with an external resistor Rlim. We solder in a 30K resistor by default for a ~2A current limit, however you can remove this resistor and/or solder a resistor over it to change the resistance and change the limit. Each order comes with one fully assembled and tested motor driver breakout, two 2-pin terminal blocks and a small strip of header. Some light soldering is required to attach the header and terminal blocks but its a simple task that can be done with basic soldering equipment. Technical Details Product Dimensions: 24.4mm x 20.4mm x 9.7mm / 1.0 x 0.8 x 0.4 Product Weight: 2.2g / 0.1o... -
Precio: $46,349.00
Adafruit DS18B20 Digital temperature sensor + extras [ADA374
-Titulo Original : Adafruit DS18B20 Digital temperature sensor + extras [ADA374]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 374 // Stock Type: Sensors >> Temperature // In Stock & Ready to Ship // These 1-wire digital temperature sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-analog converter. They work great with any microcontroller using a single digital pin, and you can even connect multiple ones to the same pin, each one has a unique 64-bit ID burned in at the factory to differentiate them. Usable with 3.0-5.0V systems. The only downside is they use the Dallas 1-Wire protocol, which is somewhat complex, and requires a bunch of code to parse out the communication. There's a great Arduino library for 1-Wire, but some microcontrollers do not have support for 1-Wire so be sure to check! We toss in a 4.7k resistor, which is required as a pullup from the DATA to VCC line when using the sensor. We don't have a detailed tutorial up yet but you can get started by using the Dallas Temperature Control Arduino library which requires also the OneWire Library ... -
Precio: $38,309.00Expira: 07/08/2021
Adafruit Ds2413 1-wire Two Gpio Controller Breakout [ada155
-Titulo Original : Adafruit DS2413 1-Wire Two GPIO Controller Breakout [ADA1551]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1551 // Stock Type: Breakout Boards >> Other // In Stock & Ready to Ship // You're too cool for I2C, and SPI has so many wires, 8-bit parallel... how can that be fashionable!? You are a 1-Wire kinda gal, and you want more 1-Wire breakouts in your life to complement all of your great engineering. Well rock on, because here you go, it's a 1-Wire controller with two open-drain GPIO. You can put as many of the DS2413's as you want on a single I/O line, each one is uniquely addressable and shares the single I/O pin happily. The two controllable I/O lines (PIOA and PIOB) can be used as inputs or outputs. They are open-drain, so if you want to power an LED or something, you'll need a remote power supply (see Maxim's product page for more details ) We have a basic Arduino sketch that uses the OneWire library to communicate with this chip. Don't forget to add the 4.7Kohm resistor from I/O to your 1-Wire controller power supply (3.3V - 5V) on the Arduino side of the wires. DS2413 1-Wire Two GPIO Controller Breakout ( 4:45 ...
-
Precio: $46,349.00
Adafruit DS3231 Precision RTC FeatherWing - RTC Add-on For F
-Titulo Original : Adafruit DS3231 Precision RTC FeatherWing - RTC Add-on For Feather Boards [ADA3028]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 3028 // Stock Type: Development Boards >> Feather >> Wings // In Stock & Ready to Ship // A Feather board without ambition is a Feather board without FeatherWings! This is the DS3231 Precision RTC FeatherWing : it adds an extremely accurate I2C-integrated Real Time Clock (RTC) with a Temperature Compensated Crystal Oscillator (TCXO) to any Feather main board. This RTC is the most precise you can get in a small, low power package. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight! Check out our range of Feather boards here. Most RTCs use an external 32kHz timing crystal that is used to keep time with low current draw. And that's all well and good, but those crystals have slight drift, particularly when the temperature changes (the temperature changes the oscillation frequency very very very slightly but it does add up!) This RTC is in a beefy package because the crystal is inside the chip! And right next to the integrated crystal is a temperature sensor. That sensor compensates for the frequency changes by adding or removing clock ticks so that the timekeeping stays on schedule.With a CR1220 12mm coin cell plugged into the top of the FeatherWing, you can get years of precision timekeeping, even when main power is lost. Great for datalogging and clocks, or anything where you need to really know the time. A CR1220 coin cell is required to use the battery-backup capabilities! We don't include one by default, to make shipping easier for those abroad, but we do stock them so pick one up or use any CR1220 you have handy. Our tutorial for the DS3231 breakout has all the library and example code you need to get started, works with any and all of our Feathers via the Arduino IDE Check out our range of Feather boards here... -
Precio: $54,389.00
Adafruit EL Wire 2xAA Pocket Inverter [ADA317]
-Titulo Original : Adafruit EL Wire 2xAA Pocket Inverter [ADA317]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 317 // Stock Type: EL Wire/Tape/Panel >> Inverters/Power Connectors // In Stock & Ready to Ship // A small, portable inverter for EL wire. Powers off of 2 AA batteries (not included!), it can drive 1 to 8 feet (about 2.5m) of our high-brightness EL wire for 10 hours. There is a button for selecting steady/blink/off modes. There's a removable clip on the back. Comes with a 2.5mm pitch female JST connectorTo connect a piece EL wire to this, you'll want a male connector wire The EL inverter requires a 'load' to stabilize itself. Otherwise the inverter can spike and damage itselfLike all inverters we've used, the 2000 Hz oscillation is slightly audible. To reduce the squeaking, we suggest opening up the case padding it with thick foam tape/weatherstripping . Squirting some hot glue around the capacitors may also help. We managed to get it silent this way. We used this to make our awesome TRON bag Soldering to EL wire is a little tricky but luckily we wrote a detailed step-by-step tutorial... -
Precio: $55,549.00Expira: 03/05/2021
Adafruit Electret Microphone Amplifier - Max9814 With Auto
-Titulo Original : Adafruit Electret Microphone Amplifier - MAX9814 with Auto Gain Control [ADA1713]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1713 // Stock Type: Sensors >> Sound/Noise // In Stock & Ready to Ship // Color: Add an ear to your project with this well-designed electret microphone amplifier with AGC. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. For the amplification, we use the Maxim MAX9814, a specialty chip that is designed for amplifying electret microphones in situations where the loudness of the audio isn't predictable. This fancy microphone amplifier module is a step above the rest, with built in automatic gain control. The AGC in the amplifier means that nearby 'loud' sounds will be quieted so they don't overwhelm & 'clip' the amplifier, and even quiet, far-away sounds will be amplified. This amplifier is great for when you want to record or detect audio in a setting where levels change and you don't want to have to tweak the amplifier gain all the time. The chip at the heart of this amp is the MAX9814 , and has a few options you can configure with the breakout. The default 'max gain' is 60dB, but can be set to 40dB or 50dB by jumpering the Gain pin to VCC or ground. You can also change the Attack/Release ratio, from the default 1:4000 to 1:2000 or 1:500. The ouput from the amp is about 2Vpp max on a 1.25V DC bias, so it can be easily used with any Analog/Digital converter that is up to 3.3V input. If you want to pipe it into a Line Input, just use a 1-100uF blocking capacitor in series (100uF sounds best). For audio-reactive projects, we suggest using an FFT driver library (such as the one in this library) which can take the audio input and 'translate' it into frequencies. If you just need to keep track of audio levels, see our sound-level meter tutorial for Arduino Each order comes with one assembled and tested board, with electret mic pre-soldered on, and a small piece of header. Our tutorial will get you started with using and testing the microphone amplifier and you can check out our general-purpose mi... -
Precio: $70,009.00Expira: 24/02/2023
Adafruit Electroluminescent (EL) Panel - 10cm x 10cm Blue [A
-Titulo Original : Adafruit Electroluminescent (EL) Panel - 10cm x 10cm Blue [ADA624]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 624 // Stock Type: EL Wire/Tape/Panel >> EL Panels // In Stock & Ready to Ship // EL panel is the big sister to EL wire - it has the same glow effect but with a flat shape instead of a round shape. This is a big sheet of flexible plastic coated with EL material so its like one big glowing square. It emits an even glow over the entire shape. The glowing part of the panel is 10 cm x 10 cm (approx: 4 x 4). There's a plastic coating is about 10.4cm x 10.4cm. Its covered in what seems to be PVC, the tape is thus weather-proof - but note that the connectors are NOT waterproof, just a bit of heatshrink. This isn't something we would suggest leaving outdoors for extended periods. You can attach it by sewing through the clear plastic edging, or gluing the back to a flat surface. It is flexible but will crease and damage if folded. You can cut the panel up as long as the shape you cut out is continuous and has the JST cable attached. This panel is a blue color when lit and appears blue when off. Because EL tape has more surface area than wire, it requires a more powerful inverter. We suggest you use our 4xAAA inverter which is strong enough to power a single panel at once - plug it in and turn it on! For more permanent installations, the 12V EL inverter can also power a single panel and run off 8xAA batteries or a wall adapter....
-
Precio: $92,619.00
Adafruit Electroluminescent (EL) Panel - 10cm x 10cm White (
-Titulo Original : Adafruit Electroluminescent (EL) Panel - 10cm x 10cm White (625)-Fabricante : ADAFRUIT-Descripcion Original: Glow Size: 10 cm x 10 cm (3.95" x 3.95") // Plastic Size: 10.4 cm x 10.4 cm (4.1" x 4.1"), about 0.5mm thick // Panel lifetime: >25000 hours // Operating voltage: 60-250VAC // Operating Frequency: 50-5000HZ // DESCRIPTION EL panel is the big sister to EL wire - it has the same glow effect but with a flat shape instead of a round shape. This is a big sheet of flexible plastic coated with EL material so its like one big glowing square. It emits an even glow over the entire shape. The glowing part of the panel is 10 cm x 10 cm (approx: 4 x 4).There's a plastic coating is about 10.4cm x 10.4cm. Its covered in what seems to be PVC, the tape is thus weather-proof - but note that the connectors are NOT waterproof, just a bit of heatshrink. This isn't something we would suggest leaving outdoors for extended periods. You can attach it by sewing through the clear plastic edging, or gluing the back to a flat surface. It is flexible but will crease and damage if folded. You can cut the panel up as long as the shape you cut out is continuous and has the JST cable attached. This panel is a slightly blue-tinted white color when lit and appears pink when off. Like all EL products, an inverter is REQUIRED to operate the panel Because EL tape has more surface area than wire, it requires a more powerful inverter. We suggest you use our 4xAAA inverter which is strong enough to power a single panel at once - plug it in and turn it on! For more permanent installations, the 12V EL inverter can also power a single panel and run off 8xAA batteries or a wall adapter. Please note! EL tape, EL wire and EL panel are made with different processes and so the color and brightness will not be consistent between the two: white tape, white wire and white panels will not necessarily match... -
Precio: $26,509.00Expira: 06/05/2023
Adafruit Fast Vibration Sensor Switch (Easy to Trigger) [ADA
-Titulo Original : Adafruit Fast Vibration Sensor Switch (Easy to Trigger) [ADA1766]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1766 // Stock Type: Sensors >> Motion // In Stock & Ready to Ship // The poor man's accelerometer/motion sensor! These spring-vibration switches are non-directional vibration induced trigger switches. Inside is a very soft spring coiled around a long metal pin. When the switch is moved, the spring touches the center pole to make contact. So, when there's motion, the two pins will act like a closed switch. When everything is still, the switch is open. Great for basic projects and wearables! We also have a version with a slightly stiffer spring which makes it harder to trigger , and a version with a much more stiff spring which is even harder to trigger ... -
Precio: $140,339.00
Adafruit Feather M0 WiFi with uFL - ATSAMD21 + ATWINC1500 -
-Titulo Original : Adafruit Feather M0 WiFi with uFL - ATSAMD21 + ATWINC1500 - fw 19.4.4-Fabricante : ADAFRUIT-Descripcion Original: ATSAMD21G18 @ 48MHz with 3.3V logic/power // 256KB FLASH, 32KB SRAM, No EEPROM // 3.3V regulator (AP2112K-3.3) with 600mA peak current output, WiFi can draw 300mA peak during xmit // USB native support, comes with USB bootloader and serial port debugging // You also get tons of pins - 20 GPIO pins // Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather M0 WiFi w/ATWINC1500 - our take on an 'all-in-one' Arduino-compatible + high speed, reliable WiFi with built in USB and battery charging. Its an Adafruit Feather M0 with a WiFi module, ready to rock! We have other boards in the Feather family, check'em out here. Connect your Feather to the Internet with this fine new FCC-certified WiFi module from Atmel. This 802.11bgn-capable WiFi module is the best new thing for networking your devices, with built-in low-power management capabilites, Soft-AP, SSL TLS 1.2 support and rock solid performance. We were running our adafruit.io MQTT demo for a full weekend straight with no hiccups (it would have run longer but we had to go to work, so we unplugged it). This module is very fast & easy to use in comparison to other WiFi modules we've used in the past. This module works with 802.11b, g, or n networks & supports WEP, WPA and WPA2 encryption. You can connect to your own WiFi networks or create your own with Soft AP mode, where it becomes its own access point (we have an example of it creating a webserver that you can then control the Arduino's pins). You can clock it as fast as 12MHz for speedy, reliable packet streaming. And scanning/connecting to networks is very fast, just a second or two... -
Precio: $120,409.00
Adafruit Feather M4 Express - Featuring ATSAMD51 - ATSAMD51
-Titulo Original : Adafruit Feather M4 Express - Featuring ATSAMD51 - ATSAMD51 Cortex M4-Fabricante : ADAFRUIT-Descripcion Original: 512KB Flash and 192KB RAM // ATSAMD51J19 // 120MHz Cortex M4 // It's what you've been waiting for, the Feather M4 Express featuring ATSAMD51. This Feather is fast like a swift, smart like an owl, strong like a ox-bird (it's half ox, half bird, OK?) This feather is powered by our new favorite chip, the ATSAMD51J19 - with its 120MHz Cortex M4 with floating point support and 512KB Flash and 192KB RAM. Your code will zig and zag and zoom, and with a bunch of extra peripherals for support, this will for sure be your favorite new chipset. And best of all, it's a Feather - so you know it will work with all our FeatherWings! What a great way to quickly get up and running. The most exciting part of the Feather M4 is that while you can use it with the Arduino IDE - and it's bonkers fast when you do, we are shipping it with CircuitPython on board. When you plug it in, it will show up as a very small disk drive with main.py on it. Edit main.py with your favorite text editor to build your project using Python, the most popular programming language. No installs, IDE or compiler needed, so you can use it on any computer, even ChromeBooks or computers you can't install software on. When you're done, unplug the Feather and your code will go with you. The Feather M4 Express uses the extra space left over to add a Mini NeoPixel, 2 MB SPI Flash storage and a little prototyping space. You can use the SPI Flash storage like a very tiny hard drive. When used in CircuitPython, the 2 MB flash acts as storage for all your scripts, libraries and files. When used in Arduino, you can read/write files to it, like a little datalogger or SD card, and then with our helper program, access the files over USB...
Mostrar del 73 al 96 (de 178 productos)
-
destacado
Cooler Cpu Be Quiet Bk024 Dark Rock Slim 180w Tdp 120mm Pwm Fan
Precio: $349,059.00-Titulo Original : be quiet! BK024 Dark Rock Slim, CPU Cooler, 180W TDP, Silent Wings... -
destacado
Bateria Lg G4 3500mah Li-ion Bl-51yf Para S986 H810 H815
Precio: $74,979.00-Titulo Original : LG G4 Battery,3500mAh Li-ion Replacement LG BL-51YF Battery for LG... -
destacado
Book : Toradora! (Light Novel) Vol. 7Takemiya, Yuyuko
Precio: $66,349.00-Titulo Original : Toradora! (Light Novel) Vol. 7 (Toradora! (Light Novel), 7)-Fabric... -
destacado
Libro : Claves Para Convertirte En Escritor: Mejora Tu Es...
Precio: $54,899.00-Titulo Original : Claves Para Convertirte En Escritor: Mejora Tu Escritura De Forma ... -
destacado
Ssd : Verbatim 256gb Vi550 Sata Iii 2.5 Internal Ssd
Precio: $52,909.00-Titulo Original : Verbatim 256GB Vi550 SATA III 2.5 Internal SSD-Fabricante : VERBAT... -
destacado
Funda Otterbox Commuter Series iPhone 11 Pro Max (knsz)
Precio: $142,119.00-Titulo Original : OtterBox COMMUTER SERIES Case for iPhone 11 Pro Max - BLACK -Fabr...
Contáctenos
- el bazar digital.com SRL
- 011 - 3221-3652
- info@elbazardigital.com
- +54 9 11 2290-6553
