290,073 ventas concretadas desde abril 2017.
011-3221-3652 
+54-911-2290-6553
Componentes Electrónicos > Semiconductores > Circuitos Integrados
Mostrar del 25 al 48 (de 175 productos)
-
Precio: $75,229.00 -
Precio: $82,579.00 -
Expira:
14/03/2024Precio: $30,279.00 -
Precio: $476,129.00
-
Precio: $104,229.00 -
Precio: $128,089.00 -
Precio: $76,599.00 -
Precio: $63,059.00
-
Precio: $46,109.00 -
Precio: $108,369.00 -
Precio: $190,739.00 -
Precio: $152,709.00
-
Precio: $77,039.00 -
Precio: $73,419.00 -
Expira:
25/03/2023Precio: $44,259.00 -
Precio: $48,109.00
-
Precio: $46,269.00 -
Precio: $70,049.00 -
Precio: $71,619.00 -
Precio: $90,729.00
-
Precio: $114,629.00 -
Expira:
27/01/2022Precio: $38,959.00 -
Precio: $65,429.00 -
Precio: $78,479.00
-
Precio: $75,229.00
Adafruit 259 , USB Li-Ion/LiPoly Charger, v1.2
-Titulo Original : Adafruit 259 , USB Li-Ion/LiPoly Charger, v1.2-Fabricante : ADAFRUIT-Descripcion Original: Comes assembled and tested with a free bonus jst cable // For charging single lithium ion/lithium polymer // Weight: 5.7G ( 0.2Oz) // Chip supports a 10K ntc thermistor which we have stuffed as a plain 10K. For people who require temperature monitors (using high charge rates), remove the 10K and solder in the thermistor in its place // 0.1 inch // This is a lithium ion and lithium polymer battery charger based on the MCP73833. It uses a USB mini-b for connection to any computer or 'USB wall adapter'. charging is done in three stages: first a preconditioning charge, then a constant-current fast charge and finally a constant-voltage trickle charge to keep the battery topped-up. The fast-charge current is 500MA by default, but is easily adjustable from 100MA up to 1000MA by soldering a through-hole resistor on-board. This board is great for DIY projects because it has 3 indicator LEDs - one for power, one for charging status and a third that indicates when charging is complete. You may also keep the battery connected to the charger and pass power through the additional jst connector using the included cable... -
Precio: $82,579.00
Adafruit 2633 Bluefruit LE SPI Friend - Bluetooth Low Energy
-Titulo Original : Adafruit Bluefruit LE SPI Friend - Bluetooth Low Energy (BLE)-Fabricante : Adafruit-Descripcion Original: The Bluefruit can also act like an HID Keyboard (for devices that support BLE HID) // Can become a BLE Heart Rate Monitor (a standard profile for BLE) - you just need to add the pulse-detection circuitry // Turn it into a UriBeacon, the Google standard for Bluetooth LE beacons. Just power it and the 'Friend will bleep out a URL to any nearby devices with the UriBeacon app installed. // Built in over-the-air bootloading capability so we can keep you updated with the hottest new firmware. Use any Android or iOS device to get updates and install them! // Add powerful and easy-to-use Bluetooth Low Energy to your robot, art or other electronics project! With BLE now included in modern smart phones and tablets, its fun to add wireless connectivity. So what you really need is the new Adafruit Bluefruit LE SPI Friend! The Bluefruit LE SPI Friend makes it easy to add Bluetooth Low Energy connectivity to anything with 4 or 5 GPIO pins. With SPI, you don't have to worry about baud rates, flow control, or giving up a hardware UART port. Connect to your Arduino or other microcontroller using the common four-pin SPI interface (MISO, MOSI, SCK and CS) plus a 5th GPIO pin for interrupts (to let the Arduino know when data or a response is ready). This multi-function module can do quite a lot! For most people, they'll be very happy to use the standard Nordic UART RX/TX connection profile. In this profile, the Bluefruit acts as a data pipe, that can 'transparently' transmit back and forth from your iOS or Android device. You can use Adafruit's iOS App or Android App, or write your own to communicate with the UART service. If you like Serial communication more than SPI, we also have a version that can talk UART The board is capable of much more than just sending strings over the air! Thanks to an easy to learn AT command set, you have full control over how the device behaves, including the ability to define and manipulate your own GATT Services and Characteristics, or change the way that the device advertises itself for other Bluetooth Low Energy devices to see. You can also use the AT commands to query the die temperature, check the battery voltage, and more, check the connection RSSI or MAC address, and tons more. Really, way too long to list here... -
Precio: $30,279.00Expira: 14/03/2024
Adafruit 2748 ALS-PT19 Analog Light Sensor Breakout ADA2748
-Titulo Original : Adafruit ALS-PT19 Analog Light Sensor Breakout [ADA2748]-Fabricante : Adafruit-Descripcion Original: Add a teeny analog light sensor, the ALS PT19 analog light sensor is a great way to upgrade a project that uses a photocell and needs RoHS compliance. Due to the high rejection ratio of infrared radiation, the spectral response of the ambient light sensor is close to that of human eyes. It's a pretty simple sensor - connect - to ground, + to 2.5V-5.5V or so to power it. Now measure the analog voltage on the OUT pin. That's it! The voltage will increase when the sensor detects more light... -
Precio: $476,129.00
Adafruit 2769 Circuit Playground Express Educator's Pack
-Titulo Original : Adafruit 2769 Circuit Playground Express Educator's Pack-Fabricante : ADAFRUIT-Descripcion Original: 12 piece set, color coded vinyl covered 1.25" alligator clips on one end, and male jumper wires on the other end // Contains two of each: black, red, white, green, blue, and yellow // 24 AWG wire // Circuit Playground Express Educator's Pack Circuit Playground Express is the next step towards a perfect introduction to electronics and programming. We've taken the original Circuit Playground Classic and made it even better! Not only did we pack even more sensors in, we also made it even easier to program. You can now start your journey with Microsoft Make Code block-based or JavaScript programming . Then, you can use the same board to try Circuit Python , with the Python interpreter running right on the Express. As you progress, you can advance to using Arduino IDE , which has full support of all the hardware down to the low level, so you can make powerful projects. Because you can program the same board in 3 different ways - the Express has great value and re-usability. From beginners to experts, Circuit Playground Express has something for everyone. The board is round and has alligator-clip pads around it so you don't have to solder or sew to make it work. You can power it from USB, a AAA battery pack, or with a Lipoly battery (for advanced users). Circuit Playground Express has built-in USB support. Built in USB means you plug it in to program it and it just shows up, no special cable or adapter required. Just program your code into the board then take it on the go! Pack includes: 2 x Circuit Playground Express 2 x USB cable - A/MicroB Parts to make wearable and sewable electronics: 1 x Stainless Thin Conductive Thread - 2 ply - 23 meter/76 ft. for sewing wearable projects 1 x Needle set - 3/9 sizes - 20 needles 1 x Sewable Snaps - 5mm Diameter - Card of 24 1 x Magnetic Pin Back Parts to make breadboard, paper-craft, or clip-on electronics and sensors: 1 x Copper Foil Tape with Conductive Adhesive - 6mm x 15 meter roll 1 x Small Alligator Clip Test Lead (set of 18) (more.). Made in China...
-
Precio: $104,229.00
Adafruit 2821 Feather HUZZAH With ESP8266 WiFi ADA2821
-Titulo Original : Adafruit Feather HUZZAH With ESP8266 WiFi [ADA2821]-Fabricante : Adafruit-Descripcion Original: Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather HUZZAH ESP8266 - our take on an 'all-in-one' ESP8266 WiFi development board with built in USB and battery charging. Its an ESP8266 WiFi module with all the extras you need, ready to rock! Measures 2.0 x 0.9 x 0.28 (51mm x 23mm x 8mm) without headers soldered in Light as a (large?) feather - 9.7 grams ESP8266 @ 80MHz with 3.3V logic/power 4MB of FLASH (32 MBit) Built in WiFi 802.11 b/g/n 3.3V regulator with 500mA peak current output CP2104 USB-Serial converter onboard with 921600 max baudrate for speedy uploading Auto-reset support for getting into bootload mode before firmware upload 9 x GPIO pins - can also be used as I2C and SPI 1 x analog inputs 1.0V max Built in 100mA LiPoly charger with charging status indicator LED, can also cut a trace to disable the charger Pin #0 red LED for general purpose blinking. Pin #2 blue LED for bootloading debug & general purpose blinking Power/enable pin 4 mounting holes Reset butto... -
Precio: $128,089.00
Adafruit 2829 Feather 32u4 Bluefruit LE ADA2829
-Titulo Original : Adafruit Feather 32u4 Bluefruit LE [ADA2829]-Fabricante : Adafruit-Descripcion Original: The Bluefruit can also act like an HID Keyboard (for devices that support BLE HID) // Can become a BLE Heart Rate Monitor (a standard profile for BLE) - you just need to add the pulse-detection circuitry // Turn it into a UriBeacon, the Google standard for Bluetooth LE beacons. Just power it and the 'Friend will bleep out a URL to any nearby devices with the UriBeacon app installed. // Built in over-the-air bootloading capability so we can keep you updated with the hottest new firmware. Use any Android or iOS device to get updates and install them. This will update the native code on the BLE module, to add new wireless capabilities, not program the ATmega chip. // This is the Adafruit Feather 32u4 Bluefruit - our take on an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built in USB and battery charging. Its an Adafruit Feather 32u4 with a BTLE module, ready to rock! We have other boards in the Feather family, check'em out here. Bluetooth Low Energy is the hottest new low-power, 2.4GHz spectrum wireless protocol. In particular, its the only wireless protocol that you can use with iOS without needing special certification and it's supported by all modern smart phones. This makes it excellent for use in portable projects that will make use of an iOS or Android phone or tablet. It also is supported in Mac OS X and Windows 8+. At the Feather 32u4's heart is at ATmega32u4 clocked at 8 MHz and at 3.3V logic, a chip setup we've had tons of experience with as it's the same as the Flora. This chip has 32K of flash and 2K of RAM, with built in USB so not only does it have a USB-to-Serial program & debug capability built in with no need for an FTDI-like chip, it can also act like a mouse, keyboard, USB MIDI device, etc. To make it easy to use for portable projects, we added a connector for any of our 3.7V Lithium polymer batteries and built in battery charging. You don't need a battery, it will run just fine straight from the micro USB connector. But, if you do have a battery, you can take it on the go, then plug in the USB to recharge. The Feather will automatically switch over to USB power when its available. We also tied the battery thru a divider to an analog pin, so you can measure and monitor the battery voltage to detect when you need a recharge. The Feather 32u4 Bluefruit LE uses the extra space left over to add our excellent Bluefruit BTLE module + two status indicator LEDs... -
Precio: $76,599.00
Adafruit 284 FTDI Friend Extras ADA284
-Titulo Original : Adafruit FTDI Friend Extras [ADA284]-Fabricante : Adafruit-Descripcion Original: Long gone are the days of parallel ports and serial ports. Now the USB port reigns supreme! But USB is hard, and you just want to transfer your every-day serial data from a microcontroller to computer. What now? Enter the FTDI Friend! The FTDI Friend is a tweaked out FTDI FT232RL chip adapter. Sure, like the well-known FTDI cable, it can provide power to your project and there are 4 signal lines for sending data back and forth. But the Friend can do much more! For example, you can change the signal and power lines to be either 3.3V or 5V. Arduino-derivatives and XBees use the RTS line for programming but what if you need that DTR line? It's there for you. By default, it's setup so that it matches Adafruit's FTDI cables. The 6th pin is RTS (as of Arduino IDE v18 this will work perfectly for uploading to 'inos), the power wire is +5V and the signal levels are 3.3V. You can even rearrange the wire order with a 6-pin extension cable (not included). In a pinch, you can use it to program AVRs (its a bit slow but works!) Item Specifics Length: 38.07mm/1.5in Width: 17.89mm/0.7in Height: 7.7mm/0.31in Weight: 3.4g/0.12o... -
Precio: $63,059.00
Adafruit 2859 NeoPixel Jewel - 7 X 5050 RGBW LED W/Integrate
-Titulo Original : Adafruit NeoPixel Jewel - 7 X 5050 RGBW LED W/Integrated Drivers [ADA2859]-Fabricante : Adafruit-Descripcion Original: Be the belle of the ball with the NeoPixel Jewel! These NeoPixel Jewels now have 4 LEDs in them (red, green, blue, and white) for excellent lighting effects. This is the Natural White RGBW version. We also have this jewel in Warm White, Cool White, and good ole RGB! The NeoPixel is 'split', one half is the RGB you know and love, the other half is a white LED with a yellow phosphor. Unlit, it resembles an egg yolk. Lit up these are insanely bright (like ow my eye hurts) and can be controlled with 8-bit PWM per channel (8 x 4 channels = 32-bit color overall). Great for adding lots of colorful + white dots to your project...
-
Precio: $46,109.00
Adafruit 2881 A/V And RCA Composite Video, Audio Cable For R
-Titulo Original : Adafruit A/V And RCA (Composite Video, Audio) Cable For Raspberry Pi [ADA2881]-Fabricante : Adafruit-Descripcion Original: Description this a/v rca cable for raspberry pi is a great way to turn your pi 3, 2, a+ or b+'s output into a fullposite video and audio device. Simply connect the cable to your raspberry pi's 3. 5mm jack and the other side into whatever device you're looking to connect to and get full rca visuals and sound. We're big fans of rca connectors. They're one of our favorite plugs that everyone has a fond memory of using. Yellow'sposite video while red and white are for stereo audio. The cable is around 5 feet long. This cable has the right wiring so you canposite video out - e. G. The trrs corresponds to left, right, ground, video... -
Precio: $108,369.00
Adafruit 2999 ATWINC1500 WiFi Breakout
-Titulo Original : Adafruit ATWINC1500 WiFi Breakout-Fabricante : Adafruit-Descripcion Original: Connect your Arduino to the Internet with this fine new FCC-certified WiFi module from Atmel. This 802.11bgn-capable WiFi module is the best new thing for networking your devices, with SSL support and rock solid performance - running our adafruit.io MQTT demo for a full weekend straight with no hiccups (it would have run longer but we had to go to work, so we unplugged it). We like these so much, they've completely replaced the CC3000 module on all our projects. The Adafruit ATWINC1500 WiFi Breakout uses SPI to communicate, so with about 6 wires, you can get your wired up and ready to go. Right now the Atmel-supplied library works great with Arduino Zero, and seems to work OK on Uno but may not work on other Arduinos. You can clock it as fast as 12MHz for speedy, reliable packet streaming. And scanning/connecting to networks is very fast, a few seconds. This module works with 802.11b, g, or n networks & supports WEP, WPA and WPA2 encryption. The datasheet says it can do Soft-AP mode but we don't have any code to actually use that. Since this is our new favoritest SPI-protocol WiFi module we've decided to make a little breakout for it. The breakout comes with level shifting on all the input pins so you can use it with 3V or 5V logic. A 3.3V voltage regulator that can handle the 300mA spikes lets you power from 3-5.5VDC. There's also 3 LEDs that you can control over the SPI interface (part of the library code) or you can have controlled by the Arduino library. They'll light up when connected to an SSID, or transmitting data... -
Precio: $190,739.00
Adafruit 3010 Feather M0 WiFi - ATSAMD21 ATWINC1500
-Titulo Original : Adafruit (PID 3010 Feather M0 WiFi - ATSAMD21 ATWINC1500-Fabricante : Adafruit-Descripcion Original: ATSAMD21G18 @ 48MHz with 3.3V logic/power - 256KB FLASH, 32KB SRAM, No EEPROM // This FCC-certified WiFi module works with 802.11b, g, or n networks and supports WEP, WPA and WPA2 encryption // USB native support, comes with USB bootloader and serial port debugging // You also get tons of pins - 20 GPIO pins Hardware Serial, hardware I2C, hardware SPI support 8 x PWM pins 10 x analog inputs 1 x analog output // Measures 2.1" x 0.9" x 0.3" (53.65mm x 23mm x 8mm) without headers soldered in. Note it is 0.1" longer than most Feathers // Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather M0 WiFi w/ATWINC1500 - our take on an 'all-in-one' Arduino-compatible + high speed, reliable WiFi with built in USB and battery charging. Its an Adafruit Feather M0 with a WiFi module, ready to rock! We have other boards in the Feather family, check'em out here. Connect your Feather to the Internet with this fine new FCC-certified WiFi module from Atmel. This 802.11bgn-capable WiFi module is the best new thing for networking your devices, with built-in low-power management capabilites, Soft-AP, SSL TSL 1.2 support and rock solid performance. We were running our adafruit.io MQTT demo for a full weekend straight with no hiccups (it would have run longer but we had to go to work, so we unplugged it). This module is very fast and easy to use in comparison to other WiFi modules we've used in the past. This module works with 802.11b, g, or n networks and supports WEP, WPA and WPA2 encryption. You can connect to your own WiFi networks or create your own with Soft AP mode, where it becomes its own access point (we have an example of it creating a webserver that you can then control the Arduino's pins). You can clock it as fast as 12MHz for speedy, reliable packet streaming. And scanning/connecting to networks is very fast, just a second or two. A highly-capable Cortex M0+ processor with ton more I/O pins, lots of 12-bit ADCs, a 10-bit DAC, 6 total SERCOMs that can each do SPI, I2C or UART (3 are used by the existing interfaces, leaving you 3), plenty of timers, PWMs, DMA, native USB, and mor... -
Precio: $152,709.00
Adafruit 3178 Feather M0 With RFM95 LoRa Radio - 900MHz
-Titulo Original : Adafruit Feather M0 With RFM95 LoRa Radio - 900MHz-Fabricante : Adafruit-Descripcion Original: SX127x LoRa based module with SPI interface // Packet radio with ready-to-go Arduino libraries // Uses the license-free ISM bands (ITU "Europe" @ 433MHz and ITU "Americas" @ 900MHz) // +5 to +20 dBm up to 100 mW Power Output Capability (power output selectable in software) // ~300uA during full sleep, ~120mA peak during +20dBm transmit, ~40mA during active radio listening. // Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather M0 RFM95 LoRa Radio (900MHz) - our take on an microcontroller with a Long Range (LoRa) packet radio transceiver with built in USB and battery charging. Its an Adafruit Feather M0 with a 900MHz radio module cooked in! Great for making wireless networks that are more flexible than Bluetooth LE and without the high power requirements of WiFi. We have other boards in the Feather family, check'em out here. This is the 900 MHz radio version, which can be used for either 868MHz or 915MHz transmission/reception - the exact radio frequency is determined when you load the software since it can be tuned around dynamically. We also sell a 433MHz version of the same radio chipset! At the Feather M0's heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero. This chip has a whopping 256K of FLASH (8x more than the Atmega328 or 32u4) and 32K of RAM (16x as much)! This chip comes with built in USB so it has USB-to-Serial program & debug capability built in with no need for an FTDI-like chip. To make it easy to use for portable projects, we added a connector for any of our 3.7V Lithium polymer batteries and built in battery charging. You don't need a battery, it will run just fine straight from the micro USB connector. But, if you do have a battery, you can take it on the go, then plug in the USB to recharge. The Feather will automatically switch over to USB power when its available. We also tied the battery thru a divider to an analog pin, so you can measure and monitor the battery voltage to detect when you need a recharge...
-
Precio: $77,039.00
Adafruit 3229 Radio FeatherWing - RFM69HCW 900MHz
-Titulo Original : Adafruit (PID 3229 Radio FeatherWing - RFM69HCW 900MHz-Fabricante : Adafruit-Descripcion Original: SX1231 based module with SPI interface // Packet radio with ready-to-go Arduino libraries // Uses the license-free ISM bands // +13 to +20 dBm up to 100 mW Power Output Capability (power output selectable in software) // 50mA (+13 dBm) to 150mA (+20dBm) current draw for transmissions // Add short-hop wireless to your Feather with these Radio Featherwings. These add-ons for any Feather board will let you integrate packetized radio (with the RFM69 radio) or LoRa radio (with the RFM9x's). These radios are good options for kilometer-range radio, and paired with one of our WiFi, cellular or Bluetooth Feathers, will let you bridge from 433/900 MHz to the Internet or your mobile device. These radio modules come in four variants (two modulation types and two frequencies) The RFM69's are easiest to work with, and are well known and understood. The LoRa radios are exciting, longer-range and more powerful but also more expensive. RFM69 @ 433 MHz - basic packetized FSK/GFSK/MSK/GMSK/OOK radio at 433 MHz for use in Europe ITU 1 license-free ISM, or for amateur use with restrictions (check your local amateur regulations!) RFM69 @ 900 MHz - basic packetized FSK/GFSK/MSK/GMSK/OOK radio at 868 or 915 MHz for use in Americas ITU 2 license-free ISM, or for amateur use with restrictions (check your amateur regulations!) RFM98 @ 433 MHz - LoRa capable radio at 433 MHz for use in Europe ITU 1 license-free ISM, or for amateur use with restrictions (check your local amateur regulations!) RFM95 @ 900 MHz - LoRa capable radio at 868 or 915 MHz for use in Americas ITU 2 license-free ISM, or for amateur use with restrictions (check your local amateur regulations!) This is the RFM69 @ 900 MHz version, it can be used for 868 MHz or 915 MHz (the radios use software configured frequency) These are +20dBm FSK packet radios that have a lot of nice extras in them such as encryption and auto-retransmit. They can go at least 500 meters line of sight using simple wire antennas, probably up to 5Km with directional antennas and settings tweaking... -
Precio: $73,419.00
Adafruit 3251 Si7021 Temperature & Humidity Sensor Breakout
-Titulo Original : Adafruit (PID 3251) Si7021 Temperature & Humidity Sensor Breakout Board-Fabricante : Adafruit-Descripcion Original: ± 3% relative humidity measurements with a range of 0–80% RH // ±0.4 °C temperature accuracy at a range of -10 to +85 °C // Great for all of your environmental sensing projects // It uses I2C for data transfer so it works with a wide range of microcontrollers. // It's summer and you're sweating and your hair's all frizzy and all you really want to know is why the weatherman said this morning that today's relative humidity would max out at a perfectly reasonable 42% when it feels more like 77%. Enter the Si7021 Temperature + Humidity Sensor - the best way to prove the weatherman wrong! This lovely sensor for Silicon labs has ± 3% relative humidity measurements with a range of 0–80% RH, and ±0.4 °C temperature accuracy at a range of -10 to +85 °C. Great for all of your environmental sensing projects. It uses I2C for data transfer so it works with a wide range of microcontrollers. We put this nice sensor on a breakout board with a 3.3V regulator and level shifting so you can use it safely with 3.3V or 5V power & logic. There's a PTFE filter to keep the sensor clean, that's the white flat thing on top. Also comes with some pin header. Some light soldering is required to attach the header but it's easy to do... -
Precio: $44,259.00Expira: 25/03/2023
Adafruit 3258 Panel Mount Extension USB Cable - Micro B Male
-Titulo Original : Adafruit Panel Mount Extension USB Cable - Micro B Male To Micro B Female [ADA3258]-Fabricante : Adafruit-Descripcion Original: Interested in making neat stuff with an Arduino-compatible board but not sure where to start? This kit includes all the pieces needed to complete over 20 different circuit and projects. Basically everything you need to be playing within minutes of its arrival. No soldering required, works with Mac, Windows and Linux! This item is the same exact kit as https://www.adafruit.com/product/170 This pack includes the Adafruit Metro. METRO is the culmination of years of playing with AVRs: we wanted to make a development board that is easy to use and is hacker friendly. At the heart is an ATmega328P, with 32KB of flash and 2KB of RAM, running at 16 MHz. It is fully compatible with the Arduino IDE (select Arduino UNO in the board-type menu) Power the METRO with 7-9V polarity protected DC or the micro USB connector to any 5V USB source. The 2.1mm DC jack has an on/off switch next to it so you can turn off your setup easily. The METRO will automagically switch between USB and DC. METRO has 19 GPIO pins, 6 of which are Analog in as well, and 2 of which are reserved for the USB-serial converter. There's also 6 PWMs available on 3 timers (1 x 16-bit, 2 x 8-bit). There's a hardware SPI port, hardware I2C port and hardware UART to USB. Logic level is 5V but by cutting and soldering closed a jumper, you can easily convert it to 3.3V logic USB to Serial converter, there's a hardware USB to Serial converter that can be used by any computer to listen/send data to the METRO, and can also be used to launch and update code via the bootloader Four indicator LEDs, on the front edge of the PCB, for easy debugging. One green power LED, two RX/TX LEDs for the UART, and a red LED connected to pin PB5 Easy reprogramming, comes pre-loaded with the Optiboot bootloader, which is supported by avrdude and only uses 512 bytes. Fully compatible with the Arduino IDE (select Arduino UNO in the board-type menu) Works with all Adafruit shields... -
Precio: $48,109.00
Adafruit 3296 DS1307 Real Time Clock Breakout Board
-Titulo Original : Adafruit 3296 DS1307 Real Time Clock Breakout Board-Fabricante : Adafruit-Descripcion Original: DS1307 Real Time Clock Breakout Board This real time clock (RTC) with battery backup allows your microcontroller project to keep track of time even if it's reprogrammed or if the power is lost. It's perfect for data logging, clock-building, time stamping, timers, alarms, and more. The DS1307 is the most popular RTC but it requires 5V power to work (although we've used it with 5V power and 3.3V logic successfully). The DS1307 is simple and inexpensive but not a high precision device. It may lose or gain up to 2 seconds a day. For a high-precision, temperature compensated alternative, take a look at the DS3231 precision RTC . It works great with an Arduino using our RTC library or with a Raspberry Pi (or similar single board linux computer) . Note: This product does not come with a CR1220 coin cell battery. We recommend you purchase a CR1220 coin cell battery to use with this product. Features PCB & header are included Plugs into any breadboard, or you can use wires Two mounting holes Will keep time for 5 years or more Specifications Length: 25.8mm/1.02in Width: 21.7mm/0.85in Height: 5mm/0.2in Weight: 2.3g/0.09oz Mounting holes are 2.2mm(0.086in) diameter, 25mm(0.98in) apart This board/chip uses I²C 7-bit address 0x68 . Made in China...
-
Precio: $46,269.00
Adafruit 3297 DRV8833 DC/Stepper Motor Driver Breakout Board
-Titulo Original : Adafruit (PID 3297 DRV8833 DC/Stepper Motor Driver Breakout Board-Fabricante : Adafruit-Descripcion Original: DRV8833 motor driver chip // Spin two DC motors or step one bi-polar or uni-polar stepper with up to 1.2A per channel // 2 full H-bridges // 2.7V to 10.8V motor power // DRV8833 an handle a peak of 2A, but only for a short amount of time // Spin two DC motors or step one bi-polar or uni-polar stepper with up to 1.2A per channel using the DRV8833. This motor driver chip is a nice alternative to the TB6612 driver. Like that chip, you get 2 full H-bridges, but this chip is better for low voltage uses (can run from 2.7V up to 10.8V motor power) and has built in current limiting capability. We set it up for 1A current limiting so you don't get more than 2A per chip, but you can also disable the current limiting, or change it to a different limit! We solder on DRV8833 onto a breakout board for you here, with a polarity protection FET on the motor voltage input. Each breakout chip contains two full H-bridges (four half H-bridges). That means you can drive two DC motors bi-directionally, or one stepper motor. Just make sure they're good for about 1.2 Amp or less of current, since that's the limit of this chip. They do handle a peak of 2A but that's just for a short amount of time, if you turn off the current limiting we set. What we like most about this particular driver is that it comes with built in kick-back diodes internally so you dont have to worry about the inductive kick damaging your project or driver! You also don't have to worry as much about burning out the chip with overdriving since there is current limiting. There's two digital inputs per H-bridge (one for each half of the bridge), you can PWM one of the inputs to control motor speed. Runs at 2.7V-10.8V logic/motor power. The motor voltage is the same as the logic voltage, but logic voltage from 2.7V or greater will work so no need to worry if you are powering the motors from 9V and using 3.3V logic. For higher voltages, check out the TB6612. For much higher voltages and currents check out the DRV8871! Comes as one assembled and tested breakout plus a small strip of header. You'll need to do some light soldering to attach the header onto the breakout PCB. Arduino, motors, and power supply not included... -
Precio: $70,049.00
Adafruit 3316 VL6180X Time Of Flight Distance Ranging Sensor
-Titulo Original : Adafruit (PID 3316 VL6180X Time Of Flight Distance Ranging Sensor (VL6180)-Fabricante : Adafruit-Descripcion Original: VL6180X Time of Flight distance sensor // Range: 5mm to 200mm // On Board 5V regulator and level shifting // Works with 3V to 5V // Works with Arduino and other micro controller projects // The VL6180X (sometimes called the VL6180) is a Time of Flight distance sensor like no other you've used! The sensor contains a very tiny laser source, and a matching sensor. The VL6180X can detect the time of flight, or how long the laser light has taken to bounce back to the sensor. Since it uses a very narrow light source, it is good for determining distance of only the surface directly in front of it. Unlike sonars that bounce ultrasonic waves, the 'cone' of sensing is very narrow. Unlike IR distance sensors that try to measure the amount of light bounced, the VL6180X is much more precise and doesn't have linearity problems or 'double imaging' where you can't tell if an object is very far or very close. This is the 'little sister' of the Adafruit VL53L0X ToF sensor, and can handle about 5mm to 200mm of range distance. It also includes a lux sensor. If you need a larger range, check out the VL53L0X which can measure 50 - 1200 mm. The sensor is small and easy to use in any robotics or interactive project. Since it needs 2.8V power and logic we put the little fellow on a breakout board with a regulator and level shifting. You can use it with any 3-5V power or logic microcontroller with no worries. Each order comes with a small piece of header. Solder the header onto your breakout board with your iron and some solder and wire it up for instant distance-sensing-success! Communicating to the sensor is done over I2C with some simple commands. Most of the work is handled inside the sensor itself, so its very easy to port our Arduino library to another microcontroller... -
Precio: $71,619.00
Adafruit 3346 I2S 3W Stereo Speaker Bonnet For Raspberry Pi
-Titulo Original : Adafruit (PID 3346 I2S 3W Stereo Speaker Bonnet For Raspberry Pi - Mini Kit-Fabricante : Adafruit-Descripcion Original: 3W Stereo Amplifier Bonnet for Raspberry Pi // I2S digital sound standard interface // Plug any 4 ohm or 8 ohm speakers // Operating Voltage: 5V (2.4A for 3W 4 ohm speakers) // Works with Raspberry Pi with 2x20 headers (A+, B+, Zero, Pi 2, Pi 3, etc) // Hey Mr. DJ! Turn up that Raspberry Pi mix to the max with this cute 3W Stereo Amplifier Bonnet for Raspberry Pi. (It's not big enough to be an official HAT, so we called it a bonnet, you see?) It's the exact same size as a Raspberry Pi Zero but works with any and all Raspberry Pi computers with a 2x20 connector - A+, B+, Zero, Pi 2, Pi 3, etc. We've tested it out with Raspbian (the offical operating system) and Retropie. This Bonnet uses I2S a digital sound standard, so you get really crisp audio. The digital data goes right into the amplifier so there's no static like you hear from the headphone jack. And it's super easy to get started. Just plug in any 4Ω to 8Ω speakers, up to 3 Watts, run our installer script on any Raspberry Pi, reboot and you're ready to jam! Each order comes as a fully tested PCB with a 2x20 header and 2x terminal blocks. Some light soldering is required to attach the header onto PCB so you can plug it into your Raspberry Pi. Once that's done either plug one of our enclosed speaker sets right into the JST jack in the middle or you can solder the terminal blocks in and then connect any speaker you like like our 4Ω 3W or 8Ω 1W. Hey you can even use a surface transducer! Our tutorial will get you set up with instructions, you'll be rockin' out in 15 minutes. Don't forget to make sure you have a good strong 5V power supply - especially if you're using the 3W 4 ohm speakers! Our 2.4A power plug is recommended. Pi Zero and speakers not included... -
Precio: $90,729.00
Adafruit 3357 Music Maker FeatherWing - MP3 OGG WAV MIDI Syn
-Titulo Original : Adafruit (PID 3357 Music Maker FeatherWing - MP3 OGG WAV MIDI Synth Player-Fabricante : Adafruit-Descripcion Original: Features the VS1053B codec chip - decodes Ogg Vorbis, MP3/MP2/MP1, MP4, AAC, WMA, FLAC, WAV/PCM, MIDI. // SPI Interface // Can play audio from an uSD (micro SD) card // FAT16/FAT32 formatted SD card // Built-in MIDI synth/drum machine with dozens of instruments // Bend all audio files to your will with the Adafruit Music Maker FeatherWing! It's a fun-size version of our Music Maker shield for Arduino! This powerful shield features the VS1053, an encoding/decoding (codec) chip that can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). You can do all sorts of stuff with the audio as well such as adjusting bass, treble, and volume digitally. All this functionality is implemented in a light-weight SPI interface so that any Feather Board can play audio from an SD card. There's also a special MIDI mode that you can boot the chip into that will read 'classic' 31250Kbaud MIDI data from the UART TX pin and act like a synth/drum machine - there are dozens of built-in drum and sample effects! What a great musical add-on to your Feather! That's why we spun up this super FeatherWing, perfect for use with a great many of our Feather Boards! Here are some specs: Features the VS1053B codec chip - decodes Ogg Vorbis, MP3/MP2/MP1, MP4, AAC, WMA, FLAC, WAV/PCM, MIDI. Stereo audio out with proper audio filter caps and ground reference so it can be safely connected directly to headphones, a stereo system or other powered speakers MicroSD card socket, for any FAT16/FAT32 formatted SD card from 64MB or greater Built in MIDI synth/drum machine with dozens of instruments Each order comes with one tested FeatherWing, and two sticks of 0.1 male headers to plug it into your Feather. Some light soldering is required to attach the through-hole headers to the PCB for plugging into your Feather Board. Headphones, SD card and Feather Board not included...
-
Precio: $114,629.00
Adafruit 3505 Metro M0 Express - Designed For CircuitPython
-Titulo Original : Adafruit (PID 3505 Metro M0 Express - Designed For CircuitPython - ATSAMD21G18-Fabricante : Adafruit-Descripcion Original: ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero. This chip has a whopping 256K of FLASH (8x more than the Atmega328) and 32K of RAM (16x as much)! // This chip comes with built in USB so it has USB-to-Serial program & debug capability built in with no need for an FTDI-like chip. // Power the METRO with 7-9V polarity protected DC or the micro USB connector to any 5V USB source. The 2.1mm DC jack has an on/off switch next to it so you can turn off your setup easily. The METRO will automagically switch between USB and DC. // METRO has 25 GPIO pins, 12 of which are analog in, and one of which is a true analog out. There's a hardware SPI port, hardware I2C port and hardware UART. Logic level is 3.3V // Easy reprogramming, comes pre-loaded with the UF2 bootloader, which looks like a USB storage key. Simply drag firmware on to program, no special tools or drivers needed! It can be used to load up CircuitPython, PXT MakeCode or Arduino IDE (it is bossa-compatible) // Metro is our series of microcontroller boards for use with the Arduino IDE. This new Metro M0 Express board looks a whole lot like our original Metro 328, but with a huge upgrade. Instead of the ATmega328, this Metro features a ATSAMD21G18 chip, an ARM Cortex M0+. It's our first Metro that is designed for use with CircuitPython! CircuitPython is our beginner-oriented flavor of MicroPython - and as the name hints at, its a small but full-featured version of the popular Python programming language specifically for use with circuitry and electronics. Not only can you use CircuitPython, but the Metro M0 is also usable in the Arduino IDE. Native USB, there's no need for a hardware USB to Serial converter as the Metro M0 has built in USB support. When used to act like a serial device, the USB interface can be used by any computer to listen/send data to the METRO, and can also be used to launch and update code via the bootloader. It can also act like a keyboard, mouse or MIDI device as well. Four indicator LEDs and one NeoPixel, on the front edge of the PCB, for easy debugging. One green power LED, two RX/TX LEDs for data being sent over USB, and a red LED connected. Next to the reset button there is an RGB NeoPixel that can be used for any purpose. 2 MB SPI Flash storage chip is included on board. You can use the SPI Flash storage like a very tiny hard drive. When used in Circuit Python, the 2 MB flash acts as storage for all your scripts, libraries and files. When used in Arduino, you can read/write files to it, like a little datalogger or SD card, and then with our helper program, access the files over USB. Comes fully assembled with headers, tested, and with the UF2 bootloader loaded on. We also include 4 rubber bumpers to keep it from slipping off your desk. No soldering required to use, plug and play... -
Precio: $38,959.00Expira: 27/01/2022
Adafruit 3915 Circuit Playground Express Enclosure
-Titulo Original : Adafruit 3915 Circuit Playground Express Enclosure-Fabricante : Adafruit-Descripcion Original: This enclosure is only compatible with the Circuit Playground Express! // This minimal but elegant acrylic case will turn your board into an electronic snowflake // The enclosure is designed to snap together securely with no tools required // lic case will turn your board into an electronic snowflake. The enclosure is designed to snap together securely with no tools required. You can still press all the buttons and slide the switch thanks to a clever plastic widget fitted inside // The case winds around all the touch pads so you can still touch them or attach alligator clips // We've got nice cases for many of our beloved boards, but the Circuit Playground Express has been left out of couture enclosure game. Enter Ada-friend Mike Doell to the rescue! This minimal but elegant acrylic case will turn your board into an electronic snowflake. The enclosure is designed to snap together securely with no tools required. You can still press all the buttons and slide the switch thanks to a clever plastic widget fitted inside. The case winds around all the touch pads so you can still touch them or attach alligator clips. On the back, we have two slots that can be used to pass through ribbon or webbing up to 1 /2.5mm wide There is also a slim 1/4-20 nut that is embedded in the center back. This is compatible with any camera mounting accessory, so if you need a solid attachment, you can use any camera positioning tool or tripod. Since it's crystal clear, you can see all the NeoPixels shining in glorious color. The light sensor also works just fine and the case will not block IR messages going in or out. Even though there are no microphone or speaker holes, audio passes through the case via various small openings - we tested it and the difference is barely noticeable. This enclosure is only compatible with the Circuit Playground Express! This case will protect your Circuit Playground Express from every day usage, but it is not waterproof or weatherproof. This product comes as 2 molded plastic halves with the buttons in place. No boards, cables, or accessories are included... -
Precio: $65,429.00
Adafruit 3966 BMP388 - Precision Barometric Pressure And Alt
-Titulo Original : Adafruit BMP388 - Precision Barometric Pressure And Altimeter (3966)-Fabricante : Adafruit-Descripcion Original: Product Dimensions: 21.6mm x 16.6mm x 3.0mm / 0.9" x 0.7" x 0.1" // Product Weight: 1.2g / 0.0oz // Bosch has been a leader in barometric pressure sensors, from the BMP085. BMP180, and BMP280... now we've got the next generation, the Adafruit BMP388 Precision Barometric Pressure sensor. As you would expect, this sensor is similar to its earlier versions but even better. The BMP388 has better precision than ever, which makes it excellent for environmental sensing or as a precision altimeter. It can even be used in either I2C and SPI configurations. The BMP3xx is the next-generation of sensors from Bosch, and is the upgrade to the BMP280 - with a low altitude noise as low as 0.1m and the same fast conversion time. And like the previous BMP280, you can use I2C or SPI. For simple easy wiring, go with I2C. If you want to connect a bunch of sensors without worrying about I2C address collisions, go with SPI. This sensor has a relative accuracy of 8 Pascals, which translates to about ± 0.5 meter of altitude (compare to the BMP280's 12 Pascal/ ±1 meter). The datasheet sort of implies they intend this sensor to be used for drones and quadcopters, to keep altitude stable, but you could also use this for wearables or any project that wants to track height-above-sea-level. Note that for absolute height you'll still need to enter in the barometric pressure at sea level, if the weather changes, but that's true of every altimeter sensor that uses pressure. You can also measure temperature with ±0.5°C accuracy. Nice sensor right? So we made it easy for you to get right into your next project. The surface-mount sensor is soldered onto a PCB and comes with a 3.3V regulator and level shifting so you can use it with a 3V or 5V logic microcontroller without worry. Check out the Arduino library to get data out in under 10 minutes... -
Precio: $78,479.00
Adafruit 3979 ESP32 WROVER-B Module - ESP32 With PSRAM Modul
-Titulo Original : Adafruit ESP32 WROVER-B Module - ESP32 With PSRAM Module (3979)-Fabricante : Adafruit-Descripcion Original: Product Dimensions: 31.5mm x 18.0mm x 3.3mm / 1.2" x 0.7" x 0.1" // Product Weight: 2.4g / 0.1oz // The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Now get ready to take your bite-sized WiFi capabilities to the next level with the ESP-WROVER-32 WiFi / Bluetooth Classic / BLE Module! This modules is even more powerful than the WROOM-32 - it has a 8MB PSRAM chip for when you have massive data buffering needs. It is a bigger module than the WROOM-32. The core processing chip (ESP32) and SPI Flash (4MB) is the same, its just got waaay more RAM available. According to Espressif, the ESP-WROVER-32 is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications ranging from low-power sensor networks to the most demanding tasks such as voice encoding, music streaming and MP3 decoding. For advanced users only! This product is just the module - which can be difficult to use. You'll need to solder it onto a board with supporting circuitry (See the Espressif's assembled ESP32 development board for a more complete design). This module is for developers at this time, and is FCC, CE, IC, MIC (Telec), KCC, and NCC certified. Please note this product is for people who are comfortable compiling via the Tensilica toolchain. There are the beginnings of an Arduino IDE setup, Lua and MicroPython port. We are providing these for the community of advanced hackers, coders and makers who are willing to help make demos, projects and tutorials for the ESP32...
Mostrar del 25 al 48 (de 175 productos)
-
destacado
Caran Dache 888 Infinito Boligrafo Resina Amarilla Limon Cu
Precio: $75,989.00-Titulo Original : CARAN DACHE 888 Infinito Bolígrafo Resina Amarilla Limón cuerpo h... -
destacado
Libro : Desde mi alma al papel Poemas - IACOMETTI, MARIA...
Precio: $34,819.00-Titulo Original : Desde Mi Alma Al Papel: Poemas (Spanish Edition)-Fabricante : Inde... -
destacado
Book : The Garland of Letters STUDIES IN THE MANTRA-?ASTRA.
Precio: $88,979.00-Titulo Original : The Garland Of Letters: STUDIES IN THE MANTRA- ASTRA-Fabricante : ... -
destacado
Planchas de Gel Press para impresion circulo 20cm
Precio: $131,399.00-Titulo Original : Gel Press 10806-8 Gel Circle 8 -Fabricante : Gel Press-Descripci... -
destacado
Libro : Curacion con Frutas y Verduras (RTM Ediciones) -...
Precio: $25,419.00-Titulo Original : Curacion Con Frutas Y Verduras (RTM Ediciones) (Spanish Edition)-F... -
destacado
Water Cooling Rgb Thermaltake Pwm Tr4 Am4 Lga2066 360mm
Precio: $836,329.00-Titulo Original : Thermaltake Floe Triple Riing RGB 360 TT Premium Edition PWM TR4 ...
Contáctenos
- el bazar digital.com SRL
- 011 - 3221-3652
- info@elbazardigital.com
- +54 9 11 2290-6553
