Arriba

Inicio » Catalogo » Electrónica, Audio y Video » Componentes Electrónicos > Semiconductores > Circuitos Integrados

Componentes Electrónicos > Semiconductores > Circuitos Integrados

Mostrar: 
Mostrar del 49 al 72 (de 175 productos)
Páginas de Resultados: [<< Anterior]   1  2  3  4  5 ...  [Siguiente >>] 
  • TMPR Sports > Ascend > Honeycomb Polymer Pickleball Pa -SJ2H
    Precio:  $480,549.00
    Agregar al Carrito   Vista

    TMPR Sports > Ascend > Honeycomb Polymer Pickleball Pa -SJ2H

    -Titulo Original : TMPR Sports > Ascend > Honeycomb Polymer Pickleball Paddle > Medium Weight > USAPA Approved-Fabricante : TMPR Sports-Descripcion Original: 5.5" handle length // USAPA approved // Aerodynamic and powerful // Great for singles // Medium Weight (7.6 - 7.9 oz.) //...
  • Adafruit FeatherWing OLED - 128x32 OLED Add-on for All Feath
    Precio:  $73,159.00
    Expira: 06/03/2023
    Agregar al Carrito   Vista

    Adafruit FeatherWing OLED - 128x32 OLED Add-on for All Feath

    -Titulo Original : Adafruit FeatherWing OLED - 128x32 OLED Add-on for All Feather Boards [ADA2900]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2900 // Stock Type: Development Boards >> Feather >> Wings // In Stock & Ready to Ship // A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing OLED : it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight!These displays are small, only about 1 diagonal, but very readable due to the high contrast of an OLED display. This screen is made of 128x32 individual white OLED pixels and because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its crispness! We also toss on a reset button and three mini tactile buttons called A B and C so you can add a mini user interface to your feather.Tested working with  all Feather boards. The OLED uses only the two I2C pins on the Feather, and you can pretty much stack it with any other FeatherWing, even ones that use I2C since that is a shared bus. To use, Check out our tutorial ! It has schematics, datasheets, files, and code examples. Check out our range of Feather boards here...
  • Adafruit 189 PIR Motion Sensor
    Precio:  $51,729.00
    Agregar al Carrito   Vista

    Adafruit 189 PIR Motion Sensor

    -Titulo Original : Adafruit PIR Motion Sensor-Fabricante : Adafruit-Descripcion Original: Detect motion up to 7 meters away // Perfect for Raspberry Pi or Arduino Projects // Easy to use // Requires soldering of header pins // PIR sensors are used to detect motion from pets/humanoids from about 20 feet away (possibly works on zombies, not guaranteed). This one has an adjustable delay before firing (approx 2-4 seconds), adjustable sensitivity and we include a 1 foot (30 cm) cable with a socket so you can easily reposition the sensor or mount it using the two drills on either side Runs on 5V-16V power (if you need to run it off of 3V you can do that by bypassing the regulator, but that means doing a bit of soldering). Digital signal output is 3.3V high/low. Sensing range is about 7 meters (120 degree cone) There are many tutorial available on Adafruit's website for these sensors...
  • Adafruit IC Socket - for 20-pin 0.3 Chips - Pack of 3 [ADA22
    Precio:  $34,489.00
    Expira: 05/03/2024
    Agregar al Carrito   Vista

    Adafruit IC Socket - for 20-pin 0.3 Chips - Pack of 3 [ADA22

    -Titulo Original : Adafruit IC Socket - for 20-pin 0.3 Chips - Pack of 3 [ADA2204]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2204 // Stock Type: Components & Parts >> Sockets/Connectors // In Stock & Ready to Ship // An IC (Integrated Circuit) socket allows you to insert and remove chips easily from an assembled kit or project This item contains 3 of the 20 pin 0.3 wide version. Best used with chips that have 20 pins (2x10) and have 0.3 pin spacing. These are often used for soldering into a Perma Proto or PCB so that you can replace and swap chips easily. What's nice about IC sockets is that they are the same pin spacing and size so you don't have to redesign the board! For our example photo, we put the socket into an  Adafruit Perma-Proto Breadboard but any solderable PCB or protoboard will work great. Not recommended for solderless breadboards, the pins are not long enough...
  • Adafruit TPIC6B595 High Power Shift Register - TPIC6B595 [AD
    Precio:  $36,289.00
    Agregar al Carrito   Vista

    Adafruit TPIC6B595 High Power Shift Register - TPIC6B595 [AD

    -Titulo Original : Adafruit TPIC6B595 High Power Shift Register - TPIC6B595 [ADA457]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 457 // Stock Type: Components & Parts >> IC & Transistors // In Stock & Ready to Ship // Add a bunch of high-power outputs to a microcontroller system with chainable shift registers. These chips take a serial input (SPI) of 1 byte (8 bits) and then output those digital bits onto 8 pins. You can chain them together so putting three in a row with the serial output of one plugged into the serial input of another to make 3 x 8 = 24 digital outputs. You can chain pretty much as many as you want. This makes it easy to control a lot of outputs like LEDs from only 3 digital microcontroller pins. This item contains ! These chips similarly to the more well known 7HC595s but they are high power drains, able to sink 150mA per pin. They cannot source current so they should be connected to LED cathodes. This makes them ideal for use with LED matrices where you end up sinking 8 or more LEDs at once. These chips are DIP package so you can easily plug them into any breadboard or perfboard with 0.1 spacing. They are not the same pinout as '595s so check the datasheet! For an excellent tutorial on using shift registers, check out the Arduino ShiftOut pag...
  • Adafruit USB Micro-B Breakout Board [ADA1833]
    Precio:  $26,859.00
    Expira: 26/03/2022
    Agregar al Carrito   Vista

    Adafruit USB Micro-B Breakout Board [ADA1833]

    -Titulo Original : Adafruit USB Micro-B Breakout Board [ADA1833]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1833 // Stock Type: Breakout Boards >> Batteries/Power // In Stock & Ready to Ship // Simple but effective - this breakout board has a USB Micro-B connector, with all 5 pins broken out. Great for pairing with a microcontroller with USB support, or adding USB 5V power to a project. We use a micro-AB connector with through-hole shielding pads for an excellent strong connection - it won't rip off by accident! Comes with one fully assembled and tested micro B breakout PCB and a small stick of 0.1 header so you can solder it on and plug into a breadboard...
  • Adafruit 3010 Feather M0 WiFi - ATSAMD21 ATWINC1500
    Precio:  $138,819.00
    Agregar al Carrito   Vista

    Adafruit 3010 Feather M0 WiFi - ATSAMD21 ATWINC1500

    -Titulo Original : Adafruit (PID 3010 Feather M0 WiFi - ATSAMD21 ATWINC1500-Fabricante : Adafruit-Descripcion Original: ATSAMD21G18 @ 48MHz with 3.3V logic/power - 256KB FLASH, 32KB SRAM, No EEPROM // This FCC-certified WiFi module works with 802.11b, g, or n networks and supports WEP, WPA and WPA2 encryption // USB native support, comes with USB bootloader and serial port debugging // You also get tons of pins - 20 GPIO pins Hardware Serial, hardware I2C, hardware SPI support 8 x PWM pins 10 x analog inputs 1 x analog output // Measures 2.1" x 0.9" x 0.3" (53.65mm x 23mm x 8mm) without headers soldered in. Note it is 0.1" longer than most Feathers // Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather M0 WiFi w/ATWINC1500 - our take on an 'all-in-one' Arduino-compatible + high speed, reliable WiFi with built in USB and battery charging. Its an Adafruit Feather M0 with a WiFi module, ready to rock! We have other boards in the Feather family, check'em out here. Connect your Feather to the Internet with this fine new FCC-certified WiFi module from Atmel. This 802.11bgn-capable WiFi module is the best new thing for networking your devices, with built-in low-power management capabilites, Soft-AP, SSL TSL 1.2 support and rock solid performance. We were running our adafruit.io MQTT demo for a full weekend straight with no hiccups (it would have run longer but we had to go to work, so we unplugged it). This module is very fast and easy to use in comparison to other WiFi modules we've used in the past. This module works with 802.11b, g, or n networks and supports WEP, WPA and WPA2 encryption. You can connect to your own WiFi networks or create your own with Soft AP mode, where it becomes its own access point (we have an example of it creating a webserver that you can then control the Arduino's pins). You can clock it as fast as 12MHz for speedy, reliable packet streaming. And scanning/connecting to networks is very fast, just a second or two. A highly-capable Cortex M0+ processor with ton more I/O pins, lots of 12-bit ADCs, a 10-bit DAC, 6 total SERCOMs that can each do SPI, I2C or UART (3 are used by the existing interfaces, leaving you 3), plenty of timers, PWMs, DMA, native USB, and mor...
  • Adafruit Breadboard-friendly Midi Jack (5-pin Din) [ada1134
    Precio:  $25,119.00
    Agregar al Carrito   Vista

    Adafruit Breadboard-friendly Midi Jack (5-pin Din) [ada1134

    -Titulo Original : Adafruit Breadboard-friendly MIDI Jack (5-pin DIN) [ADA1134]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1134 // Stock Type: Components & Parts >> Sockets/Connectors // In Stock & Ready to Ship // To celebrate the 30th Anniversary of the invention of MIDI we're carrying these handy 5-pin MIDI jacks. They're what you see on the back of nearly every synthesizer and drum machine. These are nice sturdy jacks, and breadboard-friendly, with all the pins on 0.1 spacing for easy wiring. This handy tutorial and wiring diagram will show you how to easily turn your Arduino into a MIDI controller! Also compatible with DINSYNC cables, if you have a really old drum machine...
  • Adafruit IR Break Beam Sensor - 5mm LEDs [ADA2168]
    Precio:  $42,719.00
    Expira: 28/02/2023
    Agregar al Carrito   Vista

    Adafruit IR Break Beam Sensor - 5mm LEDs [ADA2168]

    -Titulo Original : Adafruit IR Break Beam Sensor - 5mm LEDs [ADA2168]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2168 // Stock Type: Sensors >> Motion // In Stock & Ready to Ship // Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR light, then a receiver across the way which is sensitive to that same light. When something passes between the two, and its not transparent to IR, then the 'beam is broken' and the receiver will let you know.Compared to PIR sensors, breakbeams are faster and allow better control of where you want to detect the motion. Compared to Sonar modules, they're less expensive. However, you do need both emitter and receiver on opposite sides of the area you want to monitor.This is the 5mm IR  version.   It works up to 50cm / 20. You can power it from 3.3V or 5V, but 5V will get you better range and is what we suggest. The receiver is open collector transistor output which means that you do need a pull up resistor if you want to read a digital signal off the signal wire. Most microcontrollers have the ability to turn on a built in pull up resistor. If you do not, connect a 10K resistor between the white wire of the receiver and the red wire. If you want to control a relay or LED or whatever, it can sink up to 100mA to ground Check out our IR breakbeam tutorial for how to get started quickly We also carry a 3mm version that works for slightly shorter distances...
  • Adafruit 4 x AA Battery Holder with On/Off Switch
    Precio:  $31,919.00
    Expira: 13/11/2020
    Agregar al Carrito   Vista

    Adafruit 4 x AA Battery Holder with On/Off Switch

    -Titulo Original : Adafruit 4 x AA Battery Holder with On/Off Switch-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 830 // Stock Type: Power >> Battery Holders>> AA // In Stock & Ready to Ship // Make a nice portable power pack with this 4 x AA battery holder. It fits any alkaline or rechargeable AA batteries in series. There's a snap on cover and an on/off switch which can be handy when wiring to something without a switch. The four batteries are held in series, for a nominal output of 6V DC for alkaline (6.4V when fresh, 4V when dead), and 4.8V DC for rechargeables (5.2V when fully charged, 4.4V when discharged). Using rechargeables will make this work nicely with nearly any 5V project, with alkalines you may want to put a 1N4001 in series to drop the voltage from 6V down to 5.3V...
  • Adafruit 1727 Thermocouple Amplifier With 1-Wire Breakout Bo
    Precio:  $70,349.00
    Agregar al Carrito   Vista

    Adafruit 1727 Thermocouple Amplifier With 1-Wire Breakout Bo

    -Titulo Original : Adafruit Thermocouple Amplifier With 1-Wire Breakout Board - MAX31850K [ADA1727]-Fabricante : Adafruit-Descripcion Original: A really tiny portable inverter for EL wire. Powers off of a single CR2032 coin battery (not included!), it can drive up to 50cm / 20 inches of our high-brightness EL wire or 10cm x 1cm long piece of EL tape for 3 hours (or longer if the EL wire is less than 50cm long). There is a button for selecting steady/blink/off modes. Comes with a 2.5mm pitch female JST connector. Like all inverters we've used, the 2000 Hz oscillation is slightly audible...
  • Adafruit Ribbon Cables / Idc Cables 10-pin 2x5 Socket-socke
    Precio:  $31,119.00
    Expira: 30/11/2022
    Agregar al Carrito   Vista

    Adafruit Ribbon Cables / Idc Cables 10-pin 2x5 Socket-socke

    -Titulo Original : Ribbon Cables / IDC Cables 10-pin 2x5 Socket-Socket 1.27mm IDC (SWD) Cable - 150mm long (1 piece)-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1675 // Stock Type: Cables >> Cable Assemblies // In Stock & Ready to Ship // These little cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05) pitch SWD programming connectors. We see these connectors often on ARM Cortex dev kits, and have a few handy in our ARM-dev box. We thought you may want a backup cable as well, so now they are in the Adafruit shop! One cable per order. The is 0.06mm/0.025 pitch and the is a 1.27mm (0.05) pitch 2x5 box. These are not for use with programming most AVRs or other large devices that have 0.1 pitch connectors so be aware which you need! 10-pin 2x5 Socket-Socket 1.27mm IDC (SWD) Cable - 150mm long ( 10:37 ...
  • Adafruit Flora RGB Smart NeoPixel Version 2 - Pack of 4 [ADA
    Precio:  $59,789.00
    Expira: 10/02/2021
    Agregar al Carrito   Vista

    Adafruit Flora RGB Smart NeoPixel Version 2 - Pack of 4 [ADA

    -Titulo Original : Adafruit Flora RGB Smart NeoPixel Version 2 - Pack of 4 [ADA1260]-Fabricante : ADAFRUIT-Descripcion Original: Flora NeoPixels // Designed specifically for wearables // ultra-bright LED (each pixel can draw as much as 60mA) // High Speed 800KHz communication // Full 24-bit color ability with PWM taken care of by the controller chip // What's a wearable project without LEDs? Our favorite part of the Flora platform is these tiny smart pixels. Designed specifically for wearables, these updated Flora NeoPixels have ultra-cool technology: these ultra-bright LEDs have a constant-current driver cooked right into the LED package! The pixels are chainable - so you only need 1 pin/wire to control as many LEDs as you like. They're easy to sew, and the chainable design means no crossed threads. This is the second version of the Flora NeoPixels, which runs at at 'high speed' 800KHz communication. Unfortunately they are not back-compatible with the chip-on-back 'low speed' (400KHz) Flora NeoPixels. If you have a project that already uses low speed pixels, and you want to attach more pixels to the chain, you will need to purchase version 1's as these are not cross-compatible. These pixels have full 24-bit color ability with PWM taken care of by the controller chip. Since the LED is so bright, you need less current/power to get the effects you want. The driver is constant current so its OK if your battery power changes or fluctuates a little. Each pixel draws as much as 60mA (all three RGB LEDs on for full brightness white). In theory, the Flora can drive up to 500 pixels at 30 FPS (it will run out of RAM after that). However, after about 10 pixels (or if the distance between pixels is more than an inch or two) the resistance of the thread can affect the power supply. For large quantities of pixels over 10, you may want to consider using stranded core wire or copper braid to provide a power bus for the pixels - the current draw will add up fast! Each order comes with 4 individually controllable pixels...
  • Adafruit Massive Arcade Button with LED - 100mm Red [ADA1185
    Precio:  $58,349.00
    Expira: 14/10/2023
    Agregar al Carrito   Vista

    Adafruit Massive Arcade Button with LED - 100mm Red [ADA1185

    -Titulo Original : Adafruit Massive Arcade Button with LED - 100mm Red [ADA1185]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1185 // Stock Type: Components & Parts >> Buttons // In Stock & Ready to Ship // OMG WATCH OUT! This 100mm diameter arcade button with a is so massive and inviting it may collapse upon itself and form a black hole from which not even light can escape! Until it does, however, it ready for all sorts of pressing and pushing. Science has shown no one can resist pressing its shiny surface and saying beep!. We've seen these on some games of skill in arcades, they're easy to mount on nearly any kind of enclosure. They're not waterproof or weatherproof, so best used indoors. This button has a domed red plastic cover with a black retaining ring around it. There's an optional LED included that will light up the button. The LED has a built in resistor so you can run it up to 12V but given the massive size and shallow depth of the button, it doesn't illuminate the entire button face evenly. The button activates a common arcade microswitch (included), the switch contacts are normally open. When the button is pressed, the contacts close. Massive Arcade Button with LED - 100mm Red ( 0:59 ...
  • Adafruit 3258 Panel Mount Extension USB Cable - Micro B Male
    Precio:  $41,249.00
    Expira: 25/03/2023
    Agregar al Carrito   Vista

    Adafruit 3258 Panel Mount Extension USB Cable - Micro B Male

    -Titulo Original : Adafruit Panel Mount Extension USB Cable - Micro B Male To Micro B Female [ADA3258]-Fabricante : Adafruit-Descripcion Original: Interested in making neat stuff with an Arduino-compatible board but not sure where to start? This kit includes all the pieces needed to complete over 20 different circuit and projects. Basically everything you need to be playing within minutes of its arrival. No soldering required, works with Mac, Windows and Linux! This item is the same exact kit as https://www.adafruit.com/product/170 This pack includes the Adafruit Metro. METRO is the culmination of years of playing with AVRs: we wanted to make a development board that is easy to use and is hacker friendly. At the heart is an ATmega328P, with 32KB of flash and 2KB of RAM, running at 16 MHz. It is fully compatible with the Arduino IDE (select Arduino UNO in the board-type menu) Power the METRO with 7-9V polarity protected DC or the micro USB connector to any 5V USB source. The 2.1mm DC jack has an on/off switch next to it so you can turn off your setup easily. The METRO will automagically switch between USB and DC. METRO has 19 GPIO pins, 6 of which are Analog in as well, and 2 of which are reserved for the USB-serial converter. There's also 6 PWMs available on 3 timers (1 x 16-bit, 2 x 8-bit). There's a hardware SPI port, hardware I2C port and hardware UART to USB. Logic level is 5V but by cutting and soldering closed a jumper, you can easily convert it to 3.3V logic USB to Serial converter, there's a hardware USB to Serial converter that can be used by any computer to listen/send data to the METRO, and can also be used to launch and update code via the bootloader Four indicator LEDs, on the front edge of the PCB, for easy debugging. One green power LED, two RX/TX LEDs for the UART, and a red LED connected to pin PB5 Easy reprogramming, comes pre-loaded with the Optiboot bootloader, which is supported by avrdude and only uses 512 bytes. Fully compatible with the Arduino IDE (select Arduino UNO in the board-type menu) Works with all Adafruit shields...
  • Adafruit 2829 Feather 32u4 Bluefruit LE ADA2829
    Precio:  $116,069.00
    Agregar al Carrito   Vista

    Adafruit 2829 Feather 32u4 Bluefruit LE ADA2829

    -Titulo Original : Adafruit Feather 32u4 Bluefruit LE [ADA2829]-Fabricante : Adafruit-Descripcion Original: The Bluefruit can also act like an HID Keyboard (for devices that support BLE HID) // Can become a BLE Heart Rate Monitor (a standard profile for BLE) - you just need to add the pulse-detection circuitry // Turn it into a UriBeacon, the Google standard for Bluetooth LE beacons. Just power it and the 'Friend will bleep out a URL to any nearby devices with the UriBeacon app installed. // Built in over-the-air bootloading capability so we can keep you updated with the hottest new firmware. Use any Android or iOS device to get updates and install them. This will update the native code on the BLE module, to add new wireless capabilities, not program the ATmega chip. // This is the Adafruit Feather 32u4 Bluefruit - our take on an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built in USB and battery charging. Its an Adafruit Feather 32u4 with a BTLE module, ready to rock! We have other boards in the Feather family, check'em out here. Bluetooth Low Energy is the hottest new low-power, 2.4GHz spectrum wireless protocol. In particular, its the only wireless protocol that you can use with iOS without needing special certification and it's supported by all modern smart phones. This makes it excellent for use in portable projects that will make use of an iOS or Android phone or tablet. It also is supported in Mac OS X and Windows 8+. At the Feather 32u4's heart is at ATmega32u4 clocked at 8 MHz and at 3.3V logic, a chip setup we've had tons of experience with as it's the same as the Flora. This chip has 32K of flash and 2K of RAM, with built in USB so not only does it have a USB-to-Serial program & debug capability built in with no need for an FTDI-like chip, it can also act like a mouse, keyboard, USB MIDI device, etc. To make it easy to use for portable projects, we added a connector for any of our 3.7V Lithium polymer batteries and built in battery charging. You don't need a battery, it will run just fine straight from the micro USB connector. But, if you do have a battery, you can take it on the go, then plug in the USB to recharge. The Feather will automatically switch over to USB power when its available. We also tied the battery thru a divider to an analog pin, so you can measure and monitor the battery voltage to detect when you need a recharge. The Feather 32u4 Bluefruit LE uses the extra space left over to add our excellent Bluefruit BTLE module + two status indicator LEDs...
  • Adafruit Rotary Encoder (1 piece)
    Precio:  $37,669.00
    Expira: 28/12/2020
    Agregar al Carrito   Vista

    Adafruit Rotary Encoder (1 piece)

    -Titulo Original : Adafruit Accessories Rotary Encoder (1 piece)-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 377 // Stock Type: Sensors >> Touch // In Stock & Ready to Ship // This rotary encoder is the best of the best, its a high quality 24-pulse encoder, with detents and a nice feel. It is panel mountable for placement in a box, or you can plug it into a breadboard (just cut/bend the two mechanical side tabs.) We also include a nice soft-touch knob with an arrow in it, fits perfectly and looks great. This encoder also has a push-button built into it so you can press onto the knob to close a separate switch. One side has a 3 pin connector (ground and two coding pins) and the other side has two pins for a normally-open switch.Rotary encoders are useful as rotation sensors or selectors and look similar to potentiometers. However they are not like potentiometers at all, so it's important to realize the difference! These rotary encoders rotate all the way around continuously, and are divided up into 24 'segments'. Each segment has a click-y feeling to it, and each movement clockwise or counter-clockwise causes the two switches to open and close. There is no way to know what the current 'position' is - instead you would use a microcontroller to count how many 'clicks' left or right it has been turned. If you need to detect rotational 'position' a potentiometer would be a better choice...
  • Batería de polímero de litio Kbt 3.8v 2000mah 754444
    Precio:  $77,919.00
    Agregar al Carrito   Vista

    Batería de polímero de litio Kbt 3.8v 2000mah 754444

    -Titulo Original : KBT 3.8V 2000mAh Li-Polymer Battery: 754444 Lipo Rechargeable Lithium-ion Replacement Batteries With JST Connector-Fabricante : KBT KEEP BETTER TECH-Descripcion Original: - Batería de polímero de litio 754444: 3,8 V 2000 mAh, las baterías vienen con conector JST, muy cómodo de usar. Uso amplio: la batería se ajusta a cámaras digitales, tabletas, monitores domésticos, GPS, juguetes, Network Box, ventilador USB, probador, purificador de aire, controlador, altavoz bluetooth, monitor para bebés, teclado y mouse, etc. - Larga vida útil: con alrededor de 800 ciclos de carga y descarga, la batería puede funcionar durante 1-2 años en uso normal. Si no usa la batería con frecuencia, agote la capacidad de la batería y cárguela por completo una vez al mes. ...
  • Adafruit Trinket M0 - for use with CircuitPython & Arduino I
    Precio:  $55,779.00
    Agregar al Carrito   Vista

    Adafruit Trinket M0 - for use with CircuitPython & Arduino I

    -Titulo Original : Adafruit Trinket M0 - for use with CircuitPython & Arduino IDE-Fabricante : ADAFRUIT-Descripcion Original: Same size, form-factor, and pinout as classic Trinket // ATSAMD21E18 32-bit Cortex M0+, 48 MHz processor, 6x as fast as original Trinket! // 256KB Flash - 32x as much as 8 KB on ATtiny85 // 32 KB RAM - 64x as much as 512 bytes on ATtiny85 // Header pins require soldering // The Adafruit Trinket M0 is a tiny microcontroller board, built around the Atmel ATSAMD21, a little chip with a lot of power. Perfect for when you don't want to give up your expensive dev-board and you aren't willing to take apart the project you worked so hard to design. It's Adafruit's lowest-cost CircuitPython programmable board! It is the same form factor as the original ATtiny85-based Trinket. The Trinket M0 has swapped out the lightweight ATtiny85 for a ATSAMD21E18 powerhouse. It's just as small, and it's easier to use, so you can do more. The most exciting part of the Trinket M0 is that while you can use it with the Arduino IDE, it is shipped with CircuitPython on board. When you plug it in, it will show up as a very small disk drive with main.py on it. Edit main.py with your favorite text editor to build your project using Python, the most popular programming language. No installs, IDE or compiler needed, so you can use it on any computer, even ChromeBooks or computers you can't install software on. When you're done, unplug the Trinket M0 and your code will go with you. Five GPIO pins with digital input/output with internally connected pullups or pulldowns Three of the I/O pins can be used for 12-bit analog input True analog output on one I/O pin - can be used to play 10-bit quality audio clip...
  • Adafruit 2045 Si5351A Clock Generator Breakout Board - 8KHz
    Precio:  $45,259.00
    Expira: 18/11/2021
    Agregar al Carrito   Vista

    Adafruit 2045 Si5351A Clock Generator Breakout Board - 8KHz

    -Titulo Original : Adafruit Si5351A Clock Generator Breakout Board - 8KHz To 160MHz [ADA2045]-Fabricante : Adafruit-Descripcion Original: Si5351A clock generator (from 8KHz to 150+ MHz) // i2c interface // 3 independent outputs // Outputs are 3Vpp // Includes 3.3V LDO regulator and level shifting circuitry // Never hunt around for another crystal again, with the Si5351A clock generator breakout from Adafruit! This chip has a precision 25MHz crystal reference and internal PLL and dividers so it can generate just about any frequency, from...
  • Adafruit Conductive Fiber - Stainless Steel 20um - 10 grams
    Precio:  $29,749.00
    Agregar al Carrito   Vista

    Adafruit Conductive Fiber - Stainless Steel 20um - 10 grams

    -Titulo Original : Adafruit Conductive Fiber - Stainless Steel 20um - 10 grams [ADA1088]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1088 // Stock Type: Wearables >> Materials >> Other // In Stock & Ready to Ship // This conductive fiber is super interesting! It's great for felting and could also be spun into yarn if that's your thing. We tested many different fiber thicknesses for needle felting and found that this one (20um fiber thickness) is the most pleasurable to work with. Use about 0.2g of the stuff to make a felt touch button suitable for use with the MaKey MaKey or capacitive touch sensing circuit. Make felt controllers or felt buttons onto an existing wool sweater!  You can also make a squeeze/pressure sensor with this fiber, as it becomes less resistive the more you squeeze the fibers together. Make sure to combine this fiber with a natural animal fiber (which have scales) for best results. We think 10g is the perfect amount and will get you through several projects. MaKey MaKey and alligator clips not included...
  • Adafruit SMT Breakout PCB Set for SOT-23, SOT-89, SOT-223 an
    Precio:  $37,739.00
    Agregar al Carrito   Vista

    Adafruit SMT Breakout PCB Set for SOT-23, SOT-89, SOT-223 an

    -Titulo Original : Adafruit SMT Breakout PCB Set for SOT-23, SOT-89, SOT-223 and TO252-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1230 // Stock Type: Prototyping >> SMT / SMD >> Breakout PCBs // In Stock & Ready to Ship // Beguiled by a fancy new chip, regulator or transistor that is only available in a SOT23-3, SOT23-5, SOT23-6, SOT-223, SOT-89, or TO-252 pinout? This set of breakout PCBs will make your life much much easier and get you prototyping faster than ever. This set comes with 3 different boards which fit 5 different packages and comes with five SOT-23 (fits 2 x SOT-23 on the back, and a single SOT-23-5 or SOT-23-6 on the front), four SOT-89 or SOT-223, and four TO-252. Each board has 0.1 spaced holes. Solder your chip to either side and you're ready to rock on any solderless breadboard...
  • Adafruit MPRLS Ported Pressure Sensor Breakout - 0 to 25 PSI
    Precio:  $124,799.00
    Expira: 10/01/2024
    Agregar al Carrito   Vista

    Adafruit MPRLS Ported Pressure Sensor Breakout - 0 to 25 PSI

    -Titulo Original : Adafruit MPRLS Ported Pressure Sensor Breakout - 0 to 25 PSI (3965)-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1689 // Stock Type: NeoPixels >> Drivers // In Stock & Ready to Ship // A new collaboration between Adafruit & Micah from Scanlime , we are excited to introduce Fadecandy, a NeoPixel driver with built in dithering, that can be controlled over USB. Fadecandy is not just hardware! It is a kit of both hardware and software parts that make LED art projects easier to build and better-looking so sculptors and makers and multimedia artists can concentrate on beautiful things instead of reinventing the wheel. It's an easy way to get started and an advanced tool for professionals. It's a collection of simple parts that work well together: Firmware that uses unique dithering and color correction algorithms to raise the bar for quality while getting out of the way of your creativity. Open source hardware for connecting cheap and popular WS2811 based LEDs to a laptop, desktop, or Raspberry Pi over USB. Fadecandy Server Software , which communicates with one Fadecandy board or dozens. It runs on Windows, Linux, and Mac OS, and on embedded platforms like Raspberry Pi. The Open Pixel Control protocol, a simple way of getting pixel data from your creative tools into the Fadecandy server. Libraries and examples for popular languages. We have Python and Processing already, with Javascript and Max coming soon. LEDs! Fadecandy works with Adafruit's popular WS2811/WS2812 LEDs. Each controller board supports up to 512 LEDs, arranged as 8 strips of 64 each. Not for use with RGBW NeoPixels, you can only use RGB type at this time.Headers are not included but we have tons of different kinds of dual header in the shop if you want to solder something into the pads. Fadecandy is designed to enable art that is subtle, interactive, and playful - exploring the interplay between light, form, and shadow. If you’re tired of seeing project after project with frenetic blinky rainbow fades, you’ll appreciate how easy it is to create expressiv...
  • Adafruit 3505 Metro M0 Express - Designed For CircuitPython
    Precio:  $104,799.00
    Agregar al Carrito   Vista

    Adafruit 3505 Metro M0 Express - Designed For CircuitPython

    -Titulo Original : Adafruit (PID 3505 Metro M0 Express - Designed For CircuitPython - ATSAMD21G18-Fabricante : Adafruit-Descripcion Original: ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero. This chip has a whopping 256K of FLASH (8x more than the Atmega328) and 32K of RAM (16x as much)! // This chip comes with built in USB so it has USB-to-Serial program & debug capability built in with no need for an FTDI-like chip. // Power the METRO with 7-9V polarity protected DC or the micro USB connector to any 5V USB source. The 2.1mm DC jack has an on/off switch next to it so you can turn off your setup easily. The METRO will automagically switch between USB and DC. // METRO has 25 GPIO pins, 12 of which are analog in, and one of which is a true analog out. There's a hardware SPI port, hardware I2C port and hardware UART. Logic level is 3.3V // Easy reprogramming, comes pre-loaded with the UF2 bootloader, which looks like a USB storage key. Simply drag firmware on to program, no special tools or drivers needed! It can be used to load up CircuitPython, PXT MakeCode or Arduino IDE (it is bossa-compatible) // Metro is our series of microcontroller boards for use with the Arduino IDE. This new Metro M0 Express board looks a whole lot like our original Metro 328, but with a huge upgrade. Instead of the ATmega328, this Metro features a ATSAMD21G18 chip, an ARM Cortex M0+. It's our first Metro that is designed for use with CircuitPython! CircuitPython is our beginner-oriented flavor of MicroPython - and as the name hints at, its a small but full-featured version of the popular Python programming language specifically for use with circuitry and electronics. Not only can you use CircuitPython, but the Metro M0 is also usable in the Arduino IDE. Native USB, there's no need for a hardware USB to Serial converter as the Metro M0 has built in USB support. When used to act like a serial device, the USB interface can be used by any computer to listen/send data to the METRO, and can also be used to launch and update code via the bootloader. It can also act like a keyboard, mouse or MIDI device as well. Four indicator LEDs and one NeoPixel, on the front edge of the PCB, for easy debugging. One green power LED, two RX/TX LEDs for data being sent over USB, and a red LED connected. Next to the reset button there is an RGB NeoPixel that can be used for any purpose. 2 MB SPI Flash storage chip is included on board. You can use the SPI Flash storage like a very tiny hard drive. When used in Circuit Python, the 2 MB flash acts as storage for all your scripts, libraries and files. When used in Arduino, you can read/write files to it, like a little datalogger or SD card, and then with our helper program, access the files over USB. Comes fully assembled with headers, tested, and with the UF2 bootloader loaded on. We also include 4 rubber bumpers to keep it from slipping off your desk. No soldering required to use, plug and play...
Mostrar del 49 al 72 (de 175 productos)
Páginas de Resultados: [<< Anterior]   1  2  3  4  5 ...  [Siguiente >>] 
Destacados
Revisar todos destacados

Información

Información

Nuestras ofertas

Nuestras ofertas

Su cuenta

Su cuenta

Mantente conectado

Mantente conectado

Contáctenos

Contáctenos

elbazardigital.com   © 2024