Arriba

Inicio » Catalogo » Electrónica, Audio y Video » Componentes Electrónicos > Semiconductores > Circuitos Integrados

Componentes Electrónicos > Semiconductores > Circuitos Integrados

Mostrar: 
Mostrar del 49 al 72 (de 176 productos)
Páginas de Resultados: [<< Anterior]   1  2  3  4  5 ...  [Siguiente >>] 
  • Adafruit EL Wire 2xAA Pocket Inverter [ADA317]
    Precio:  $48,949.00
    Agregar al Carrito   Vista

    Adafruit EL Wire 2xAA Pocket Inverter [ADA317]

    -Titulo Original : Adafruit EL Wire 2xAA Pocket Inverter [ADA317]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 317 // Stock Type: EL Wire/Tape/Panel >> Inverters/Power Connectors // In Stock & Ready to Ship // A small, portable inverter for EL wire. Powers off of 2 AA batteries (not included!), it can drive 1 to 8 feet (about 2.5m) of our high-brightness EL wire for 10 hours. There is a button for selecting steady/blink/off modes. There's a removable clip on the back. Comes with a 2.5mm pitch female JST connectorTo connect a piece EL wire to this, you'll want a male connector wire The EL inverter requires a 'load' to stabilize itself. Otherwise the inverter can spike and damage itselfLike all inverters we've used, the 2000 Hz oscillation is slightly audible. To reduce the squeaking, we suggest opening up the case padding it with thick foam tape/weatherstripping . Squirting some hot glue around the capacitors may also help. We managed to get it silent this way. We used this to make our awesome TRON bag  Soldering to EL wire is a little tricky but luckily we wrote a detailed step-by-step tutorial...
  • Amazin Aces Cosmic Pickleball Paddle Set - Includes 2 USAPA
    Precio:  $293,839.00
    Agregar al Carrito   Vista

    Amazin Aces Cosmic Pickleball Paddle Set - Includes 2 USAPA

    -Titulo Original : Amazin' Aces Cosmic Pickleball Paddle Set - Includes 2 USAPA-Approved Pickleball Paddles with Graphite Face and Polymer Honeycomb Core, 4 USAPA-Approved Outdoor Pickleballs, and 1 Portable Carry Bag-Fabricante : Amazin Aces-Descripcion Original: Premium Pickleball Paddle Set. Charge up your game with Amazin' Aces Cosmic Pickleball Paddles. This set includes 2 USAPA approved pickleball rackets, 4 outdoor pickleballs, and 1 portable carry bag. // Quality Design and Construction. Made from high-end materials, cutting-edge technology, and expert craftsmanship. Our pickleball paddle weighs 7.6 oz, making it the choice for pros and enthusiasts. // Optimal Speed, Control, and Power. The perfect all-around paddle set, Cosmic Pickleball Paddles feature a polymer honeycomb core with a graphite face that enhances ball spin, control, and placement. // Comfort Meets Convenience. Our Cosmic Paddle Set features a hand-stitched contour grip for a comfortable in-hand feel and a carry bag for convenient storage of your pickleball sports equipment. // 1-Year Warranty. We back up our premium pickleball set with a 1-year warranty. If you find any issue with our Cosmic Pickleball Paddles, you can get it fixed or replaced with no questions asked. //...
  • Adafruit FeatherWing OLED - 128x32 OLED Add-on for All Feath
    Precio:  $73,129.00
    Expira: 06/03/2023
    Agregar al Carrito   Vista

    Adafruit FeatherWing OLED - 128x32 OLED Add-on for All Feath

    -Titulo Original : Adafruit FeatherWing OLED - 128x32 OLED Add-on for All Feather Boards [ADA2900]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2900 // Stock Type: Development Boards >> Feather >> Wings // In Stock & Ready to Ship // A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing OLED : it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight!These displays are small, only about 1 diagonal, but very readable due to the high contrast of an OLED display. This screen is made of 128x32 individual white OLED pixels and because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its crispness! We also toss on a reset button and three mini tactile buttons called A B and C so you can add a mini user interface to your feather.Tested working with  all Feather boards. The OLED uses only the two I2C pins on the Feather, and you can pretty much stack it with any other FeatherWing, even ones that use I2C since that is a shared bus. To use, Check out our tutorial ! It has schematics, datasheets, files, and code examples. Check out our range of Feather boards here...
  • Adafruit 189 PIR Motion Sensor
    Precio:  $51,729.00
    Agregar al Carrito   Vista

    Adafruit 189 PIR Motion Sensor

    -Titulo Original : Adafruit PIR Motion Sensor-Fabricante : Adafruit-Descripcion Original: Detect motion up to 7 meters away // Perfect for Raspberry Pi or Arduino Projects // Easy to use // Requires soldering of header pins // PIR sensors are used to detect motion from pets/humanoids from about 20 feet away (possibly works on zombies, not guaranteed). This one has an adjustable delay before firing (approx 2-4 seconds), adjustable sensitivity and we include a 1 foot (30 cm) cable with a socket so you can easily reposition the sensor or mount it using the two drills on either side Runs on 5V-16V power (if you need to run it off of 3V you can do that by bypassing the regulator, but that means doing a bit of soldering). Digital signal output is 3.3V high/low. Sensing range is about 7 meters (120 degree cone) There are many tutorial available on Adafruit's website for these sensors...
  • Adafruit IC Socket - for 20-pin 0.3 Chips - Pack of 3 [ADA22
    Precio:  $34,489.00
    Expira: 05/03/2024
    Agregar al Carrito   Vista

    Adafruit IC Socket - for 20-pin 0.3 Chips - Pack of 3 [ADA22

    -Titulo Original : Adafruit IC Socket - for 20-pin 0.3 Chips - Pack of 3 [ADA2204]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2204 // Stock Type: Components & Parts >> Sockets/Connectors // In Stock & Ready to Ship // An IC (Integrated Circuit) socket allows you to insert and remove chips easily from an assembled kit or project This item contains 3 of the 20 pin 0.3 wide version. Best used with chips that have 20 pins (2x10) and have 0.3 pin spacing. These are often used for soldering into a Perma Proto or PCB so that you can replace and swap chips easily. What's nice about IC sockets is that they are the same pin spacing and size so you don't have to redesign the board! For our example photo, we put the socket into an  Adafruit Perma-Proto Breadboard but any solderable PCB or protoboard will work great. Not recommended for solderless breadboards, the pins are not long enough...
  • Adafruit LED Lighting Development Tools 5050 LED Breakout PC
    Precio:  $37,739.00
    Agregar al Carrito   Vista

    Adafruit LED Lighting Development Tools 5050 LED Breakout PC

    -Titulo Original : LED Lighting Development Tools 5050 LED Breakout PCB 10 pack (1 piece)-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1762 // Stock Type: Breakout Boards >> SMT Breakout PCB // In Stock & Ready to Ship // This 5050 LED breakout PCB set will make your life much much easier and get you prototyping faster than ever. Solder your 5050 sized LED to either side and you're ready to rock on any solderless breadboard. Each item comes with ten PCBs and each PCB is identical. PCB is .8mm/.03 thick, with ~10mm/0.4 spacing between the two rows...
  • Adafruit FONA - Mini Cellular GSM Breakout - SMA Version [AD
    Precio:  $207,819.00
    Agregar al Carrito   Vista

    Adafruit FONA - Mini Cellular GSM Breakout - SMA Version [AD

    -Titulo Original : Adafruit FONA - Mini Cellular GSM Breakout - SMA Version [ADA1963]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1963 // Stock Type: Wireless >> Cellular // In Stock & Ready to Ship // Ring, Ring! Who's that callin'? It's your breadboard! Introducing Adafruit FONA MiniGSM, an adorable all-in-one cellular phone module that lets you add voice, text, SMS and data to your project in an adorable little package. This module measures only 1.75x1.25 but packs a surprising amount of technology into its little frame. At the heart is a GSM cellular module (we use the latest SIM800) the size of a postage stamp. This module can do just about everything. This version has an SMA connector. For the uFL version, click here! Quad-band 850/900/1800/1900MHz - connect onto any global GSM network with any 2G SIM (in the USA, T-Mobile is suggested)Make and receive voice calls using a headset OR an external 8Ω speaker + electret microphoneSend and receive SMS messagesSend and receive GPRS data (TCP/IP, HTTP, etc.)Scan and receive FM radio broadcasts (yeah, we don't exactly know why this was included but it works really well)PWM/Buzzer vibrational motor controlAT command interface with auto baud detectionSounds delicious, right? So we plated this fine module onto a little breakout with all the extras you need to make your next project shineOnboard LiPoly battery charging circuitry so you can take your project on the go. Use any 500mAh+ LiPoly or LiIon battery and recharge over the MicroUSB when necessary. Two LEDs let you know when its charging and doneStandard 4-pole TRRS headphone jack. Use any 'Android' or 'iPhone'-compatible headset with micBreakouts for external 8Ω speaker and electret mic if you don't want to use a headphoneLevel shifting circuitry so you can run it with 2.8V to 5V logic.Vibrational motor (buzzer) driver so you can have noiseless notificationsSMA connection for external antennaIndicator LEDs for power and network connectivity Standard SIM slides into the bac...
  • Adafruit 3010 Feather M0 WiFi - ATSAMD21 ATWINC1500
    Precio:  $138,819.00
    Agregar al Carrito   Vista

    Adafruit 3010 Feather M0 WiFi - ATSAMD21 ATWINC1500

    -Titulo Original : Adafruit (PID 3010 Feather M0 WiFi - ATSAMD21 ATWINC1500-Fabricante : Adafruit-Descripcion Original: ATSAMD21G18 @ 48MHz with 3.3V logic/power - 256KB FLASH, 32KB SRAM, No EEPROM // This FCC-certified WiFi module works with 802.11b, g, or n networks and supports WEP, WPA and WPA2 encryption // USB native support, comes with USB bootloader and serial port debugging // You also get tons of pins - 20 GPIO pins Hardware Serial, hardware I2C, hardware SPI support 8 x PWM pins 10 x analog inputs 1 x analog output // Measures 2.1" x 0.9" x 0.3" (53.65mm x 23mm x 8mm) without headers soldered in. Note it is 0.1" longer than most Feathers // Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather M0 WiFi w/ATWINC1500 - our take on an 'all-in-one' Arduino-compatible + high speed, reliable WiFi with built in USB and battery charging. Its an Adafruit Feather M0 with a WiFi module, ready to rock! We have other boards in the Feather family, check'em out here. Connect your Feather to the Internet with this fine new FCC-certified WiFi module from Atmel. This 802.11bgn-capable WiFi module is the best new thing for networking your devices, with built-in low-power management capabilites, Soft-AP, SSL TSL 1.2 support and rock solid performance. We were running our adafruit.io MQTT demo for a full weekend straight with no hiccups (it would have run longer but we had to go to work, so we unplugged it). This module is very fast and easy to use in comparison to other WiFi modules we've used in the past. This module works with 802.11b, g, or n networks and supports WEP, WPA and WPA2 encryption. You can connect to your own WiFi networks or create your own with Soft AP mode, where it becomes its own access point (we have an example of it creating a webserver that you can then control the Arduino's pins). You can clock it as fast as 12MHz for speedy, reliable packet streaming. And scanning/connecting to networks is very fast, just a second or two. A highly-capable Cortex M0+ processor with ton more I/O pins, lots of 12-bit ADCs, a 10-bit DAC, 6 total SERCOMs that can each do SPI, I2C or UART (3 are used by the existing interfaces, leaving you 3), plenty of timers, PWMs, DMA, native USB, and mor...
  • Adafruit Breadboard-friendly Midi Jack (5-pin Din) [ada1134
    Precio:  $25,119.00
    Agregar al Carrito   Vista

    Adafruit Breadboard-friendly Midi Jack (5-pin Din) [ada1134

    -Titulo Original : Adafruit Breadboard-friendly MIDI Jack (5-pin DIN) [ADA1134]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1134 // Stock Type: Components & Parts >> Sockets/Connectors // In Stock & Ready to Ship // To celebrate the 30th Anniversary of the invention of MIDI we're carrying these handy 5-pin MIDI jacks. They're what you see on the back of nearly every synthesizer and drum machine. These are nice sturdy jacks, and breadboard-friendly, with all the pins on 0.1 spacing for easy wiring. This handy tutorial and wiring diagram will show you how to easily turn your Arduino into a MIDI controller! Also compatible with DINSYNC cables, if you have a really old drum machine...
  • Adafruit DS18B20 Digital temperature sensor + extras [ADA374
    Precio:  $32,609.00
    Agregar al Carrito   Vista

    Adafruit DS18B20 Digital temperature sensor + extras [ADA374

    -Titulo Original : Adafruit DS18B20 Digital temperature sensor + extras [ADA374]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 374 // Stock Type: Sensors >> Temperature // In Stock & Ready to Ship // These 1-wire digital temperature sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-analog converter. They work great with any microcontroller using a single digital pin, and you can even connect multiple ones to the same pin, each one has a unique 64-bit ID burned in at the factory to differentiate them. Usable with 3.0-5.0V systems. The only downside is they use the Dallas 1-Wire protocol, which is somewhat complex, and requires a bunch of code to parse out the communication. There's a great Arduino library for 1-Wire, but some microcontrollers do not have support for 1-Wire so be sure to check! We toss in a 4.7k resistor, which is required as a pullup from the DATA to VCC line when using the sensor. We don't have a detailed tutorial up yet but you can get started by using the Dallas Temperature Control Arduino library which requires also the OneWire Library ...
  • Adafruit Stereo Enclosed Speaker Set - 3w 4 Ohm
    Precio:  $52,269.00
    Expira: 23/03/2023
    Agregar al Carrito   Vista

    Adafruit Stereo Enclosed Speaker Set - 3w 4 Ohm

    -Titulo Original : Adafruit Stereo Enclosed Speaker Set - 3W 4 Ohm-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1669 // Stock Type: Components & Parts >> Speakers // In Stock & Ready to Ship // Listen up! This set of two 2.8 x 1.2 speakers are the perfect addition to any audio project where you need 4 ohm impedance and 3W or less of power. We particularly like these speakers as they are small and enclosed for good audio volume and quality. The pair have a handy SPK input cable to add audio to your displays (the connectors are similar to the JST-PH series  which is ~2.0mm spacing). We're specifically carrying these to use with our 10.1 inch , 7 inch , or 5.6 inch 1280x800 Display w/ Audio driver boards. However, they work peachy-keen with any of our audio amps as well, such as the MAX98306 , TS2012 or TPA2016 stereo class D amplifiers...
  • Adafruit 1727 Thermocouple Amplifier With 1-Wire Breakout Bo
    Precio:  $66,769.00
    Agregar al Carrito   Vista

    Adafruit 1727 Thermocouple Amplifier With 1-Wire Breakout Bo

    -Titulo Original : Adafruit Thermocouple Amplifier With 1-Wire Breakout Board - MAX31850K [ADA1727]-Fabricante : Adafruit-Descripcion Original: A really tiny portable inverter for EL wire. Powers off of a single CR2032 coin battery (not included!), it can drive up to 50cm / 20 inches of our high-brightness EL wire or 10cm x 1cm long piece of EL tape for 3 hours (or longer if the EL wire is less than 50cm long). There is a button for selecting steady/blink/off modes. Comes with a 2.5mm pitch female JST connector. Like all inverters we've used, the 2000 Hz oscillation is slightly audible...
  • Adafruit Ribbon Cables / Idc Cables 10-pin 2x5 Socket-socke
    Precio:  $31,199.00
    Expira: 30/11/2022
    Agregar al Carrito   Vista

    Adafruit Ribbon Cables / Idc Cables 10-pin 2x5 Socket-socke

    -Titulo Original : Ribbon Cables / IDC Cables 10-pin 2x5 Socket-Socket 1.27mm IDC (SWD) Cable - 150mm long (1 piece)-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1675 // Stock Type: Cables >> Cable Assemblies // In Stock & Ready to Ship // These little cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05) pitch SWD programming connectors. We see these connectors often on ARM Cortex dev kits, and have a few handy in our ARM-dev box. We thought you may want a backup cable as well, so now they are in the Adafruit shop! One cable per order. The is 0.06mm/0.025 pitch and the is a 1.27mm (0.05) pitch 2x5 box. These are not for use with programming most AVRs or other large devices that have 0.1 pitch connectors so be aware which you need! 10-pin 2x5 Socket-Socket 1.27mm IDC (SWD) Cable - 150mm long ( 10:37 ...
  • Adafruit Audio IC Development Tools Stereo 3.7W Class D Audi
    Precio:  $51,369.00
    Agregar al Carrito   Vista

    Adafruit Audio IC Development Tools Stereo 3.7W Class D Audi

    -Titulo Original : Audio IC Development Tools Stereo 3.7W Class D Audio Amplifier (1 Piece)-Fabricante : ADAFRUIT-Descripcion Original: Price For: Pack of 1 Manufacturer: Adafruit Product Category: Audio IC Development Tools RoHS: Brand: Adafruit Packaging: Bulk // This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 3.7W channels into 3 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.7V-5.5VDC. Since the amp is a class D, its incredibly efficient (over 90% efficient when driving an 8Ω speaker at over a Watt) - making it perfect for portable and battery-powered projects. It has built in thermal and over-current protection but we could barely tell it got hot. This board is a welcome upgrade to basic LM386 amps! The inputs of the amplifier go through 1.0uF capacitors, so they are fully 'differential' - if you don't have differential outputs, simply tie the R- and L- to ground. The outputs are Bridge Tied - that means they connect directly to the outputs, no connection to ground. The output is a 360KHz square wave PWM that is then 'averaged out' by the speaker coil - the high frequencies are not heard. All the above means that you can't connect the output into another amplifier, it should drive the speakers directly. Comes with a fully assembled and tested breakout board with 1.0uF input capacitors. We also include header to plug it into a breadboard, 3.5mm screw-terminal blocks so you can easily attach/detach your speakers, and a 2x4 header + jumper to change the amplifier gain on the fly. You will be ready to rock in 15 minutes! Speakers are not included, use any 3ohm or greater impedance speakers...
  • Adafruit Bluefruit Le Sniffer - Bluetooth Low Energy (ble 4
    Precio:  $112,279.00
    Expira: 12/12/2021
    Agregar al Carrito   Vista

    Adafruit Bluefruit Le Sniffer - Bluetooth Low Energy (ble 4

    -Titulo Original : Adafruit Bluefruit LE Sniffer - Bluetooth Low Energy (BLE 4.0) - nRF51822 - v2.0 [ADA2269]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2269 // Stock Type: Wireless >> Bluetooth // In Stock & Ready to Ship // Interested in learning how Bluetooth Low Energy works down to the packet level? Debugging your own BLE hardware, and trying to spot where something is going wrong? Or maybe you're writing a custom application for your phone or tablet that needs to talk to existing BLE hardware, but you don't know how it works beneath the surface? We have the perfect tool for you!This Bluefruit LE Friend is programmed with a special firmware image that turns it into an easy to use Bluetooth Low Energy sniffer. You can passively capture data exchanges between two BLE devices, pushing the data into Wireshark, the open source network analysis tool, where you can visualize things on a packet level, with useful descriptors to help you make sense of the values without having to crack open the 2000 page Bluetooth 4.0 Core Specification every time.Plug it into your development machine, fire up the special sniffer bridge SW, select the device you want to sniff, and it will fire up Wireshark for you and start pushing data in via a live stream (using Nordic's Windows software), or save to a pcap file that you can analyze with Wireshark later. Please Note :  You can only use this device to listen on Bluetooth Low Energy devices! It will not work on Bluetooth (classic) devices. The Nordic Wireshark-streaming sniffer software is currently Windows only. We have example code using the python API that will work on any OS to log the sniffed data to a pcap file for analysis so you can use this sniffer with any OS with python.The sniffer firmware cannot be used with the the Nordic DFU bootloader firmware, which means that if you want to reprogram this devices you must use a J-Link (and, likely, a SWD adapter + SWD Breakout ) You cannot over-the-air reprogram it. Check out our tutorial for more details and software downloads...
  • Adafruit 3258 Panel Mount Extension USB Cable - Micro B Male
    Precio:  $41,249.00
    Expira: 25/03/2023
    Agregar al Carrito   Vista

    Adafruit 3258 Panel Mount Extension USB Cable - Micro B Male

    -Titulo Original : Adafruit Panel Mount Extension USB Cable - Micro B Male To Micro B Female [ADA3258]-Fabricante : Adafruit-Descripcion Original: Interested in making neat stuff with an Arduino-compatible board but not sure where to start? This kit includes all the pieces needed to complete over 20 different circuit and projects. Basically everything you need to be playing within minutes of its arrival. No soldering required, works with Mac, Windows and Linux! This item is the same exact kit as https://www.adafruit.com/product/170 This pack includes the Adafruit Metro. METRO is the culmination of years of playing with AVRs: we wanted to make a development board that is easy to use and is hacker friendly. At the heart is an ATmega328P, with 32KB of flash and 2KB of RAM, running at 16 MHz. It is fully compatible with the Arduino IDE (select Arduino UNO in the board-type menu) Power the METRO with 7-9V polarity protected DC or the micro USB connector to any 5V USB source. The 2.1mm DC jack has an on/off switch next to it so you can turn off your setup easily. The METRO will automagically switch between USB and DC. METRO has 19 GPIO pins, 6 of which are Analog in as well, and 2 of which are reserved for the USB-serial converter. There's also 6 PWMs available on 3 timers (1 x 16-bit, 2 x 8-bit). There's a hardware SPI port, hardware I2C port and hardware UART to USB. Logic level is 5V but by cutting and soldering closed a jumper, you can easily convert it to 3.3V logic USB to Serial converter, there's a hardware USB to Serial converter that can be used by any computer to listen/send data to the METRO, and can also be used to launch and update code via the bootloader Four indicator LEDs, on the front edge of the PCB, for easy debugging. One green power LED, two RX/TX LEDs for the UART, and a red LED connected to pin PB5 Easy reprogramming, comes pre-loaded with the Optiboot bootloader, which is supported by avrdude and only uses 512 bytes. Fully compatible with the Arduino IDE (select Arduino UNO in the board-type menu) Works with all Adafruit shields...
  • Adafruit 2829 Feather 32u4 Bluefruit LE ADA2829
    Precio:  $116,219.00
    Agregar al Carrito   Vista

    Adafruit 2829 Feather 32u4 Bluefruit LE ADA2829

    -Titulo Original : Adafruit Feather 32u4 Bluefruit LE [ADA2829]-Fabricante : Adafruit-Descripcion Original: The Bluefruit can also act like an HID Keyboard (for devices that support BLE HID) // Can become a BLE Heart Rate Monitor (a standard profile for BLE) - you just need to add the pulse-detection circuitry // Turn it into a UriBeacon, the Google standard for Bluetooth LE beacons. Just power it and the 'Friend will bleep out a URL to any nearby devices with the UriBeacon app installed. // Built in over-the-air bootloading capability so we can keep you updated with the hottest new firmware. Use any Android or iOS device to get updates and install them. This will update the native code on the BLE module, to add new wireless capabilities, not program the ATmega chip. // This is the Adafruit Feather 32u4 Bluefruit - our take on an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built in USB and battery charging. Its an Adafruit Feather 32u4 with a BTLE module, ready to rock! We have other boards in the Feather family, check'em out here. Bluetooth Low Energy is the hottest new low-power, 2.4GHz spectrum wireless protocol. In particular, its the only wireless protocol that you can use with iOS without needing special certification and it's supported by all modern smart phones. This makes it excellent for use in portable projects that will make use of an iOS or Android phone or tablet. It also is supported in Mac OS X and Windows 8+. At the Feather 32u4's heart is at ATmega32u4 clocked at 8 MHz and at 3.3V logic, a chip setup we've had tons of experience with as it's the same as the Flora. This chip has 32K of flash and 2K of RAM, with built in USB so not only does it have a USB-to-Serial program & debug capability built in with no need for an FTDI-like chip, it can also act like a mouse, keyboard, USB MIDI device, etc. To make it easy to use for portable projects, we added a connector for any of our 3.7V Lithium polymer batteries and built in battery charging. You don't need a battery, it will run just fine straight from the micro USB connector. But, if you do have a battery, you can take it on the go, then plug in the USB to recharge. The Feather will automatically switch over to USB power when its available. We also tied the battery thru a divider to an analog pin, so you can measure and monitor the battery voltage to detect when you need a recharge. The Feather 32u4 Bluefruit LE uses the extra space left over to add our excellent Bluefruit BTLE module + two status indicator LEDs...
  • Adafruit 2.4GHz Mini Flexible WiFi Antenna with uFL Connecto
    Precio:  $32,279.00
    Agregar al Carrito   Vista

    Adafruit 2.4GHz Mini Flexible WiFi Antenna with uFL Connecto

    -Titulo Original : Adafruit 2.4GHz Mini Flexible WiFi Antenna with uFL Connector - 100mm-Fabricante : ADAFRUIT-Descripcion Original: 4DBi gain and a 50Ω impedance // Will work fantastically with just about any 2.4-2.5GHz wireless receiver/transmitter // Great for CC3000 and ATWINC1500 applications // Perfect for your IoT project // This 4 / 100mm long flexible uFL 2.4GHz antenna has approx 4DBi gain and a 50Ω impedance so it will work fantastically with just about any 2.4-2.5GHz wireless receiver/transmitter such as the Adafruit CC3000s! Antenna comes with a uFL (a.k.a u.FL / IPX / IPEX) connector, so no more need for additional adapters to get your IoT cloud flying high! Technical Details Operating Range: 2400~2500MHz / 4900~5900MHz Efficiency: 90% Bandwidth (VSWR: 2.0 max.) 140 MHz / SW...
  • Caja para 3 pilas AAA con On/off Switch pack 1
    Precio:  $36,189.00
    Agregar al Carrito   Vista

    Caja para 3 pilas AAA con On/off Switch pack 1

    -Titulo Original : Adafruit Accessories 3xAAA Battery Holder W/ On/Off Switch (1 Piece)-Fabricante : Adafruit-Descripcion Original: Interruptor encendido / apagado - Úselo con cualquier batería alcalina o recargable para una salida de aproximadamente 4.5V - Conecta 3 pilas AAA - Ideal para proyectos de 3.3...
  • Adafruit Trinket M0 - for use with CircuitPython & Arduino I
    Precio:  $55,779.00
    Agregar al Carrito   Vista

    Adafruit Trinket M0 - for use with CircuitPython & Arduino I

    -Titulo Original : Adafruit Trinket M0 - for use with CircuitPython & Arduino IDE-Fabricante : ADAFRUIT-Descripcion Original: Same size, form-factor, and pinout as classic Trinket // ATSAMD21E18 32-bit Cortex M0+, 48 MHz processor, 6x as fast as original Trinket! // 256KB Flash - 32x as much as 8 KB on ATtiny85 // 32 KB RAM - 64x as much as 512 bytes on ATtiny85 // Header pins require soldering // The Adafruit Trinket M0 is a tiny microcontroller board, built around the Atmel ATSAMD21, a little chip with a lot of power. Perfect for when you don't want to give up your expensive dev-board and you aren't willing to take apart the project you worked so hard to design. It's Adafruit's lowest-cost CircuitPython programmable board! It is the same form factor as the original ATtiny85-based Trinket. The Trinket M0 has swapped out the lightweight ATtiny85 for a ATSAMD21E18 powerhouse. It's just as small, and it's easier to use, so you can do more. The most exciting part of the Trinket M0 is that while you can use it with the Arduino IDE, it is shipped with CircuitPython on board. When you plug it in, it will show up as a very small disk drive with main.py on it. Edit main.py with your favorite text editor to build your project using Python, the most popular programming language. No installs, IDE or compiler needed, so you can use it on any computer, even ChromeBooks or computers you can't install software on. When you're done, unplug the Trinket M0 and your code will go with you. Five GPIO pins with digital input/output with internally connected pullups or pulldowns Three of the I/O pins can be used for 12-bit analog input True analog output on one I/O pin - can be used to play 10-bit quality audio clip...
  • Adafruit 2045 Si5351A Clock Generator Breakout Board - 8KHz
    Precio:  $45,259.00
    Expira: 18/11/2021
    Agregar al Carrito   Vista

    Adafruit 2045 Si5351A Clock Generator Breakout Board - 8KHz

    -Titulo Original : Adafruit Si5351A Clock Generator Breakout Board - 8KHz To 160MHz [ADA2045]-Fabricante : Adafruit-Descripcion Original: Si5351A clock generator (from 8KHz to 150+ MHz) // i2c interface // 3 independent outputs // Outputs are 3Vpp // Includes 3.3V LDO regulator and level shifting circuitry // Never hunt around for another crystal again, with the Si5351A clock generator breakout from Adafruit! This chip has a precision 25MHz crystal reference and internal PLL and dividers so it can generate just about any frequency, from...
  • Adafruit Conductive Fiber - Stainless Steel 20um - 10 grams
    Precio:  $29,749.00
    Agregar al Carrito   Vista

    Adafruit Conductive Fiber - Stainless Steel 20um - 10 grams

    -Titulo Original : Adafruit Conductive Fiber - Stainless Steel 20um - 10 grams [ADA1088]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1088 // Stock Type: Wearables >> Materials >> Other // In Stock & Ready to Ship // This conductive fiber is super interesting! It's great for felting and could also be spun into yarn if that's your thing. We tested many different fiber thicknesses for needle felting and found that this one (20um fiber thickness) is the most pleasurable to work with. Use about 0.2g of the stuff to make a felt touch button suitable for use with the MaKey MaKey or capacitive touch sensing circuit. Make felt controllers or felt buttons onto an existing wool sweater!  You can also make a squeeze/pressure sensor with this fiber, as it becomes less resistive the more you squeeze the fibers together. Make sure to combine this fiber with a natural animal fiber (which have scales) for best results. We think 10g is the perfect amount and will get you through several projects. MaKey MaKey and alligator clips not included...
  • Adafruit Vibrating Mini Motor Disc [ADA1201]
    Precio:  $31,119.00
    Expira: 15/09/2023
    Agregar al Carrito   Vista

    Adafruit Vibrating Mini Motor Disc [ADA1201]

    -Titulo Original : Adafruit Vibrating Mini Motor Disc [ADA1201]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1201 // Stock Type: Robotics & CNC >> Robotics // In Stock & Ready to Ship // *BZZZZZZZZZZ* Feel that? That's your little buzzing motor, and for any haptic feedback project you'll want to pick up a few of them. These vibe motors are tiny discs, completely sealed up so they're easy to use and embed. Two wires are used to control/power the vibe. Simply provide power from a battery or microcontroller pin (red is positive, blue is negative) and it will buzz away. Works from 2V up to 5V, higher voltages result in more current draw but also a stronger vibration. If you want to reduce the current draw/strength (for example, to control it directly from an Arduino pin) try putting a resistor (100 to 1000 ohms) in series. For full power control, a small PN2222 transistor can control a motor easily, some experimentation may be required! Vibrating Mini Motor Disc ( 6:47 ...
  • Adafruit MPRLS Ported Pressure Sensor Breakout - 0 to 25 PSI
    Precio:  $146,049.00
    Expira: 10/01/2024
    Agregar al Carrito   Vista

    Adafruit MPRLS Ported Pressure Sensor Breakout - 0 to 25 PSI

    -Titulo Original : Adafruit MPRLS Ported Pressure Sensor Breakout - 0 to 25 PSI (3965)-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1689 // Stock Type: NeoPixels >> Drivers // In Stock & Ready to Ship // A new collaboration between Adafruit & Micah from Scanlime , we are excited to introduce Fadecandy, a NeoPixel driver with built in dithering, that can be controlled over USB. Fadecandy is not just hardware! It is a kit of both hardware and software parts that make LED art projects easier to build and better-looking so sculptors and makers and multimedia artists can concentrate on beautiful things instead of reinventing the wheel. It's an easy way to get started and an advanced tool for professionals. It's a collection of simple parts that work well together: Firmware that uses unique dithering and color correction algorithms to raise the bar for quality while getting out of the way of your creativity. Open source hardware for connecting cheap and popular WS2811 based LEDs to a laptop, desktop, or Raspberry Pi over USB. Fadecandy Server Software , which communicates with one Fadecandy board or dozens. It runs on Windows, Linux, and Mac OS, and on embedded platforms like Raspberry Pi. The Open Pixel Control protocol, a simple way of getting pixel data from your creative tools into the Fadecandy server. Libraries and examples for popular languages. We have Python and Processing already, with Javascript and Max coming soon. LEDs! Fadecandy works with Adafruit's popular WS2811/WS2812 LEDs. Each controller board supports up to 512 LEDs, arranged as 8 strips of 64 each. Not for use with RGBW NeoPixels, you can only use RGB type at this time.Headers are not included but we have tons of different kinds of dual header in the shop if you want to solder something into the pads. Fadecandy is designed to enable art that is subtle, interactive, and playful - exploring the interplay between light, form, and shadow. If you’re tired of seeing project after project with frenetic blinky rainbow fades, you’ll appreciate how easy it is to create expressiv...
Mostrar del 49 al 72 (de 176 productos)
Páginas de Resultados: [<< Anterior]   1  2  3  4  5 ...  [Siguiente >>] 
Destacados
Revisar todos destacados

Información

Información

Nuestras ofertas

Nuestras ofertas

Su cuenta

Su cuenta

Mantente conectado

Mantente conectado

Contáctenos

Contáctenos

elbazardigital.com   © 2024