-Titulo Original : GINTOOYUN Pci-E 16x Riser Card,PCI Express 3.0 16X Extension Cable 90 Degree High Speed Riser Card -20mm-Fabricante : GINTOOYUN-Descripcion Original: It is the right angle riser for the PCI Express X16 buses. The connector is soldered on the component side (B side) of the board.This x16 PCI Express Riser Card lets you install a full-sized PCI Express card in a 1U or 2U server case, eliminating the expense of purchasing small form factor PCIe cards // The PCI-Express 16X Riser Card makes the PCI-Express Card away from motherboard. With the PCI-Express socket directly in line with the socket on the motherboard . When an I/O board is inserted, the component side of the I/O board will face down, towards the motherboard. // High Quality Solder Points and Gold plated Contacts for the better connectivity and Long Use. EMI shielded design can reduce electromagnetic interference and provide good transmission efficiency?Achieve high frequency and low attenuation. // Supports high speed pcie 3.0 16X card.Stable pcie Gen3 8Gbps or higher with high quality axial cable. Plug and play,no driver needed. // PCI-E 3.0 x16 128Gbp/s BANDWIDTH - Deliver all the performance of PCIe 3.0 to your GPU. Support GTX1080, GTX1080Ti, RTX2060, RTX2070, RTX2080, RTX2080Ti, RX570, RX580, RX590, RX5700 XT, RX VEGA 56, RX VEGA 64 etc, support for all graphics cards produced after 2015. // Extend the reach for GPU performance for SLI/Crossfire configurations with the gaming riser PCI-E X16 3.0 riser cable. This updated design adds more compatibility, performance and High quality you expect . Supporting a wide range of GPU solutions, take your performance and GPU placement to a new level of customization especially with select cases offering vertical GPU mounting. Size:140mm*40mm(10mm+20mm10mm) Weight:26g Color:balck Package:1*Pci-E 16x Riser Car...

-Titulo Original : GINTOOYUN U.2 To PCIE Expansion Card SFF 8639 To PCIE 3.0 X4 Riser Card,PCI-E 3.0 X4 SATA Adapter,for 2.5 U.2 NVME SSD And 2.5 SATA SSD.-Fabricante : GINTOOYUN-Descripcion Original: ?U.2 to PCI-E x4 Expansion Card? Use the PCE-E x4 expansion slot to add 2.5" U.2 NVME SSD or 2.5" SATA SSD to your PC to improve system performance and expand the overall internal storage,support WIN8 WIN10 32/64BIT/MAC/Linux system // ?Dual Interface And Dual Protocol? it is compatible with U.2 and SATA interfaces and protocols. It supplies power to the hard disk through the PCIe slot, and does not need to be connected to the power supply line. The U.2 SSD can be used directly without data cable,and the SATA data line needs to be connected when using the SATA SSD // ?Notes?1. The motherboard that does not support nvme protocol cannot be used as system disk, but can only be used as storage disk. 2. This product is suitable for inserting into the PCIE X4 X8 X16 slot of the motherboard.Incorrectly inserting the PCI slot may damage the motherboard,adapter and SSD // ?Compatibility? equipped with pcie3.0 X4 GEN3 interface,the transmission speed is up to 32Gbps,and the U.2 hard disk speed is played to a higher level. It is downward compatible with PCI-E Gen2 and PCI-E GEN1,and supports PCI-E X4 X8 x16 slots // ?Hollow-Out Design?Strong heat dissipation, stable operation for a long time and work under wide temperature, simplifying system construction, quick installation,precise PCB design,comprehensive suppression of EMI,complete signal //...

-Titulo Original : GINTOOYUN USB Type-C To DC 12V Power Charge Cable USB-C Male Input To DC5.5x2.5mm Male Power Plug Charge Cable, For Router, CCTV,etc(4.9FT)-Fabricante : GINTOOYUN-Descripcion Original: - Cable de alimentación USB C a CC. Este cable de alimentación funcionará con cualquier fuente de alimentación o batería de salida USB tipo C compatible con PD para alimentar sus dispositivos de 12 V CC. - Conector 1: conector macho USB-C; Conector 2: enchufe macho de 5,5 mm x 2,5 mm; Voltaje de salida: 12V; Corriente de salida: 3A; Longitud del cable: 150 cm/59 pulgadas; Potencia máxima: 65W (Nota: la entrada debe > salida) - Este cable de carga de conversión USB-C a DC5525 le permite deshacerse de los pesados problemas del cargador/cable de alimentación y de alimentar dispositivos con puertos de 5,5*2,5 mm que requieren alimentación de 12 V 3 A CC. - Alimente o cargue dispositivos USB tipo C a través de un enchufe/adaptador de CC estándar, adecuado para computadoras portátiles, enrutadores, teléfonos móviles, gatos livianos, ventiladores pequeños, dispositivos tipo C, etc. - NOTA: Los cables tienen la misma potencia máxima de entrada y salida y deben usarse con un cargador USB-C PD de 65w o menos si se carga un dispositivo más potente, como una computadora portátil. Cargue dispositivos de 12 V CC en su computadora a través del puerto USB tipo C. El cable de enchufe USB a CC elimina la molestia de los pesados cables de carga/alimentación, guárdelo en su mochila y llévelo con usted. NOTA: Los cables tienen la misma potencia máxima de entrada y salida y deben usarse con un cargador USB-C PD de 65 w o menos si se carga un dispositivo más potente, como una computadora portátil. 1. Chip inteligente Emark incorporado 2. Voltaje de salida: PD 12 V 3. Corriente de salida: 3 A 4. Potencia máxima: 65 W 5. Enchufe macho tipo C de entrada 6. Salida: enchufe macho CC de 5,5 mm x 2,5 mm 7. Cable material: PVC y cobre estañado 8. Longitud del cable: 1,5 m/4,9 pies El paquete incluye. 2 cables de carga de alimentación USB C a 5,5 mm/2,5 mm C...

-Titulo Original : GINTOOYUN RGB Extension Cable, 3-pin To SM 3Pin Female ARGB Connector Adapter Cable,5V 3-Pin Addressable RGB Extension Cable, For RGB Fan,PC LED Strip (0.98FT)-Fabricante : GINTOOYUN-Descripcion Original: - RGB extension cable allows to extend and connect its addressable ARGB LED or ARGB fan through a single motherboard +5V 3 pin ARGB header. - Connector 1: 1 female 3-pin ; Connector 2: 1 female SM 3-pin; voltage: 12V; Cable length: 30cm/11.8 inches (Note: including plug length). - The arrow LOGO corresponds to RGB pin 5V. Equipped with a 3-pin male pin socket, plug and play, no welding, easy to use - The outer layer of 5V 3PIN RGB cable is made of PVC plastic, which is insulated and flame retardant, soft and durable, not easy to break. - Package: 4PCS of 5V 3-pin ARGB extension cable (11.8 Inches), 4PCS of 3 Pin Connectors.Note: Before purchasing, make sure that your RGB device has a 5V 3-pin SM connector.) This extension cord is the perfect accessory for RGB LED strips and PC fans. Extend the LED strip with the PC fan in the right position during installation Note: Only 5V 3-pin digital addressable RGB motherboard connectors are supported. Specifications: Connector A: 1 3-pin female Connector B: 1 SM 3-pin female Length: 30 cm /11.8 inches; Voltage: 5V Package includes: 4 X 5V 3-pin female to SM 3-pin female adapter extension cord 4 X 3 pin male socket...