-Titulo Original : Gizmo Dorks Hips Filament for 3D Printers 1.75mm 5kg, Gray-Fabricante : GIZMO DORKS-Descripcion Original: HIPS (High Impact Polystyrene) 3D printer filament vacuumed sealed with desiccant // Extrusion nozzle temperature: 225 - 250 C; Recommended to use a heated build platform // 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 5kg / Spool Diameter: 11.75" / Spool Width: 6.25" / Spool Hub Diameter: 1.25" // HIPS filament is compatible with various 3D printers such as the Monoprice Maker Select, Lulzbot, Flash Forge, and many more! // HIPS, High Impact Polystyrene, is very similar to ABS. They share a lot of the same characteristics and qualities. However, one of the biggest differences is the solvent used to dissolve HIPS. Limonene is used with HIPS instead of Acetone for ABS. Since limonene does not affect ABS, HIPS filament is commonly used as a supporting material. HIPS is versatile, economical, and impact resistant as well as a good alternative to ABS.Extrusion Temperature: 225 - 250 CHeated Bed: 80 - 110 CDiameter: 1.75mm +/- 0.03mmNet Weight: 5 kilogramsAvailable Colors in 5kg Size: Black, Gray, WhiteGizmo Dorks has proudly released this filament with a net weight 5 kilograms. The larger amount of filament allows continuous prints without the need to swap out spools. It's perfect for larger builds...

-Titulo Original : Gizmo Dorks PETG Filament for 3D Printers 2.85mm 200g, 4 Color Pack - Blue, Green, Transparent, Red-Fabricante : GIZMO DORKS-Descripcion Original: Recommended Nozzle Temperature: 230 - 260 C; Filament diameter - 2.85mm // PETG combines the benefits of ABS and PLA, increased strength and flexibility // Net weight: 200 grams / Spool Diameter: 6" / Spool Width: 1.5" / Spool Hub Diameter: 2.25" // PETG filament is compatible with various 3D printers such as the Monoprice Maker Select, Lulzbot, Flash Forge, and many more // Color pack contains 4 spools, each spool contains 200g of filament. Colors: Blue, Green, Transparent, Red //...

-Titulo Original : Gizmo Dorks ABS Filament for 3D Printers 3mm (2.85mm) 200g, Grey-Fabricante : GIZMO DORKS-Descripcion Original: ABS (Acrylonitrile Butadiene Styrene) 3D printer filament vacuumed sealed with desiccant // Extrusion nozzle temperature: 225 - 250 C; Recommended to use a heated build platform // 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" // ABS filament is compatible with various 3D printers such as the Monoprice Maker Select, Lulzbot, Flash Forge, and many more! // ABS filament is made of top notch pure ABS resin. Our ABS resins are of the highest quality and produced with the utmost purity. ABS, Acrylonitrile Butadiene Styrene, is a favorite filament among 3D printer users because it is light weight and durable. It can be injection molded which makes it perfect for 3D printing extruders. It has a high glass transition temperature to reduce deformation, but it is also low enough to be safely attainable with standard 3D printers. ABS is a hard strong plastic with some flexibility when compared to PLA. It is also soluble in Acetone, and it can be easily sanded and machined. ABS is one of the most widely used plastics in 3D printing and for good reason. It is a strong plastic that has a decent amount of flex. The filament extrudes easily and smoothly with very little stringing or oozing. ABS does cool and shrink after extrusion, so it must be printed on a heated bed and preferably within an enclosed-case.Extrusion Temperature: 225 - 250 CHeated Bed: 80 - 110 CDiameter: 2.85mm +/- 0.03mmNet Weight: 200 gramsAvailable Colors in 200g Size: Black, Blue, Glow in the Dark, Green, Grey, Orange, Purple, Red, Transparent, and WhiteGizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool...

-Titulo Original : Gizmo Dorks ABS Filament for 3D Printers 3mm (2.85mm) 200g, Purple-Fabricante : GIZMO DORKS-Descripcion Original: ABS (Acrylonitrile Butadiene Styrene) 3D printer filament vacuumed sealed with desiccant // Extrusion nozzle temperature: 225 - 250 C; Recommended to use a heated build platform // 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" // ABS filament is compatible with various 3D printers such as the Monoprice Maker Select, Lulzbot, Flash Forge, and many more! // ABS filament is made of top notch pure ABS resin. Our ABS resins are of the highest quality and produced with the utmost purity. ABS, Acrylonitrile Butadiene Styrene, is a favorite filament among 3D printer users because it is light weight and durable. It can be injection molded which makes it perfect for 3D printing extruders. It has a high glass transition temperature to reduce deformation, but it is also low enough to be safely attainable with standard 3D printers. ABS is a hard strong plastic with some flexibility when compared to PLA. It is also soluble in Acetone, and it can be easily sanded and machined. ABS is one of the most widely used plastics in 3D printing and for good reason. It is a strong plastic that has a decent amount of flex. The filament extrudes easily and smoothly with very little stringing or oozing. ABS does cool and shrink after extrusion, so it must be printed on a heated bed and preferably within an enclosed-case.Extrusion Temperature: 225 - 250 CHeated Bed: 80 - 110 CDiameter: 2.85mm +/- 0.03mmNet Weight: 200 gramsAvailable Colors in 200g Size: Black, Blue, Glow in the Dark, Green, Grey, Orange, Purple, Red, Transparent, and WhiteGizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool...

-Titulo Original : Gizmo Dorks Flexible TPU Filament for 3D Printers 3mm (2.85mm) 200g, Red-Fabricante : GIZMO DORKS-Descripcion Original: 3D flexible filament is capable of producing very intricate parts // Can print prototypes or 3D parts that require the need to bend while still maintaining the original shape // TPU plastic is used in many everyday applications such as cell phone cases to medical devices // Flexible filament is made from TPU, thermoplastic polyurethane, with a shore hardness of 96A // Perfect sample filament size to test for quality and color, net weight of 200 grams // Color: Gizmo Dorks provides many 3D filament material types including ABS, PLA, and HIPS. However, these traditional plastics are printed into a stiff and rigid form. New materials are being brought to market every day, and Gizmo Dorks is proud to introduce the flexible filament line. Gizmo Dorks flexible filament is based off of TPU, which is Thermoplastic Polyurethane. TPU flexible filament is a soft bendable plastic that retains it's shape and form. It is a strong durable filament that is comparable to rubber. TPU filament has wonderful properties such as semi-transparency and elasticity. TPU plastic is also resistant to oils and grease.There are many practical uses for TPU as a material, and TPU can be found in my everyday applications. You will find TPU being used anywhere from car parts to power tools and medical devices. TPU is also a popular plastic used in protective cases for cell phones and tablets.Extrusion temperature: 200-220 CBed temperature: 80 - 100 CPrint Speed: 30 - 50 mm/sLayer Thickness: Above 0.1mmDiameter: 2.85mm +/- 0.03mmNet Weight: 200 gramsAvailable Colors in 200g Size: Red and WhiteAfter many requests for a smaller sample spool, Gizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool...

-Titulo Original : Gizmo Dorks Low Odor ABS 3D Printer Filament 1.75mm 1kg, Gray-Fabricante : GIZMO DORKS-Descripcion Original: Uniquely formulated to be virtually smell free while 3D printing // Low odor ABS prints are high in strength and durability while providing for maximum impact resistance. // 200 gram net weight is the perfect sample size to try out filament // Nozzle temperature range 225 - 250 C; filament diameter of 1.75 mm +/- .03 mm // Spool dimensions are 195 mm x 63 mm with a 55 mm spindle diameter; the net weight of the filament is 1 kg which is 2.2 pounds // Size:  |  Color: Gizmo Dorks is now pleased to introduce low odor ABS that eliminates the nasty foul smell emitted during 3D printing. For all of the great mechanical characteristics of ABS, it is known to give off a pungent smell during extrusion. Low odor ABS now gives you all of the wonderful ABS attributes while eliminating the smelly fumes.ABS plastic has always been a great thermoplastic to use in manufacturing and 3D printing for various reasons such as strength and durability. It's why so many commonly used products are made using ABS such as Legos. It has a high glass transition temperature to reduce deformation, but it is also low enough to be safely attainable with standard 3D printers. ABS is a hard strong plastic with increased flexibility when compared to PLA. It is also soluble in Acetone, and it can be easily sanded and machined. Being one of the most widely used filaments in 3D printing, ABS extrudes easily and smoothly with very little stringing or oozing. ABS does cool and shrink after extrusion, so it must be printed on a heated bed and preferably within an enclosed chamber.Extrusion Temperature: 225 - 250 CHeated Bed: 80 - 110 CNet weight: 1 k...

-Titulo Original : Gizmo Dorks Low Odor ABS 3D Printer Filament 3mm (2.85mm) 1kg, Red-Fabricante : GIZMO DORKS-Descripcion Original: Uniquely formulated to be virtually smell free while 3D printing // Low odor ABS prints are high in strength and durability while providing for maximum impact resistance. // 200 gram net weight is the perfect sample size to try out filament // Nozzle temperature range 225 - 250 C; filament diameter of 2.85 mm +/- .03 mm // Spool dimensions are 195 mm x 63 mm with a 55 mm spindle diameter; the net weight of the filament is 1 kg which is 2.2 pounds // Size:  |  Color: Gizmo Dorks is now pleased to introduce low odor ABS that eliminates the nasty foul smell emitted during 3D printing. For all of the great mechanical characteristics of ABS, it is known to give off a pungent smell during extrusion. Low odor ABS now gives you all of the wonderful ABS attributes while eliminating the smelly fumes.ABS plastic has always been a great thermoplastic to use in manufacturing and 3D printing for various reasons such as strength and durability. It's why so many commonly used products are made using ABS such as Legos. It has a high glass transition temperature to reduce deformation, but it is also low enough to be safely attainable with standard 3D printers. ABS is a hard strong plastic with increased flexibility when compared to PLA. It is also soluble in Acetone, and it can be easily sanded and machined. Being one of the most widely used filaments in 3D printing, ABS extrudes easily and smoothly with very little stringing or oozing. ABS does cool and shrink after extrusion, so it must be printed on a heated bed and preferably within an enclosed chamber.Extrusion Temperature: 225 - 250 CHeated Bed: 80 - 110 CNet weight: 1 k...

-Titulo Original : Gizmo Dorks Flexible TPU 3D Printer Filament 3mm (2.85mm) 200g, Black-Fabricante : GIZMO DORKS-Descripcion Original: 3D flexible filament is capable of producing very intricate parts // Can print prototypes or 3D parts that require the need to bend while still maintaining the original shape // TPU plastic is used in many everyday applications such as cell phone cases to medical devices // Flexible filament is made from TPU, thermoplastic polyurethane, with a shore hardness of 96A // Perfect sample filament size to test for quality and color, net weight of 200 grams // Color: Gizmo Dorks provides many 3D filament material types including ABS, PLA, and HIPS. However, these traditional plastics are printed into a stiff and rigid form. New materials are being brought to market every day, and Gizmo Dorks is proud to introduce the flexible filament line. Gizmo Dorks flexible filament is based off of TPU, which is Thermoplastic Polyurethane. TPU flexible filament is a soft bendable plastic that retains it's shape and form. It is a strong durable filament that is comparable to rubber. TPU filament has wonderful properties such as semi-transparency and elasticity. TPU plastic is also resistant to oils and grease.There are many practical uses for TPU as a material, and TPU can be found in my everyday applications. You will find TPU being used anywhere from car parts to power tools and medical devices. TPU is also a popular plastic used in protective cases for cell phones and tablets.Extrusion temperature: 200-220 CBed temperature: 80 - 100 CPrint Speed: 30 - 50 mm/sLayer Thickness: Above 0.1mmNet Weight: 200 gramsAfter many requests for a smaller sample spool, Gizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool...

-Titulo Original : Gizmo Dorks Glitter PLA 3D Printer Filament 3mm (2.85mm) 200g, Blue-Fabricante : GIZMO DORKS-Descripcion Original: Glitter PLA nozzle temperature range 195 - 225 C; filament diameter of 2.85 mm +/- .03 mm // Thermoplastic PLA is commonly used in 3D printing because of it's low melting temperature, odorless, and low warp // 200 gram net weight is the perfect sample size to try out filament // Gizmo Dorks PLA is specially formulated and engineered to prevent and reduce jamming // Spool dimensions are 6 inches by 1.5 inches with a 2.25 inch spindle diameter; the net weight of the filament is 200 grams // Size:  |  Color: Glitter PLA adds a new dimension or sparkle to your print. The PLA glitter colors add a glimmer or twinkle throughout the print creating a unique look. There is a physical speckle dispersed throughout the filament to make your prints stand out. Gizmo Dorks Glitter PLA filament works with a wide range of common 3D printers. PLA (Polylactic Acid) is one of the most commonly used 3D printer material and for good reason. The widely used thermoplastic has a low melting temperature while also being virtually warp free. Glitter PLA does not have an odor like ABS and does not require a heated bed. Getting failed prints because of filament jams is a painful aspect of 3D printing. However, Gizmo Dorks Glitter PLA is specifically engineered to reduce jamming.Glitter PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. Glitter PLA is a more earth friendly plastic. It is stronger and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. Glitter PLA enjoys sharper details and corners compared to ABS without the risk of cracking or warping. Glitter PLA can also be printed at higher throughput speeds.The 200 gram spool is a perfect sample size to test out and try the filament before committing to a 1 kg version...

-Titulo Original : Gizmo Dorks Low Odor ABS 3D Printer Filament 3mm (2.85mm) 1kg, Pink-Fabricante : GIZMO DORKS-Descripcion Original: Uniquely formulated to be virtually smell free while 3D printing // Low odor ABS prints are high in strength and durability while providing for maximum impact resistance. // 200 gram net weight is the perfect sample size to try out filament // Nozzle temperature range 225 - 250 C; filament diameter of 2.85 mm +/- .03 mm // Spool dimensions are 195 mm x 63 mm with a 55 mm spindle diameter; the net weight of the filament is 1 kg which is 2.2 pounds // Size:  |  Color: Gizmo Dorks is now pleased to introduce low odor ABS that eliminates the nasty foul smell emitted during 3D printing. For all of the great mechanical characteristics of ABS, it is known to give off a pungent smell during extrusion. Low odor ABS now gives you all of the wonderful ABS attributes while eliminating the smelly fumes.ABS plastic has always been a great thermoplastic to use in manufacturing and 3D printing for various reasons such as strength and durability. It's why so many commonly used products are made using ABS such as Legos. It has a high glass transition temperature to reduce deformation, but it is also low enough to be safely attainable with standard 3D printers. ABS is a hard strong plastic with increased flexibility when compared to PLA. It is also soluble in Acetone, and it can be easily sanded and machined. Being one of the most widely used filaments in 3D printing, ABS extrudes easily and smoothly with very little stringing or oozing. ABS does cool and shrink after extrusion, so it must be printed on a heated bed and preferably within an enclosed chamber.Extrusion Temperature: 225 - 250 CHeated Bed: 80 - 110 CNet weight: 1 k...

-Titulo Original : Gizmo Dorks Glitter PLA 3D Printer Filament 1.75mm 200g, Blue-Fabricante : GIZMO DORKS-Descripcion Original: Glitter PLA nozzle temperature range 195 - 225 C; filament diameter of 1.75 mm +/- .03 mm // Thermoplastic PLA is commonly used in 3D printing because of it's low melting temperature, odorless, and low warp // 200 gram net weight is the perfect sample size to try out filament // Gizmo Dorks PLA is specially formulated and engineered to prevent and reduce jamming // Spool dimensions are 6 inches by 1.5 inches with a 2.25 inch spindle diameter; the net weight of the filament is 200 grams // Size:  |  Color: Glitter PLA adds a new dimension or sparkle to your print. The PLA glitter colors add a glimmer or twinkle throughout the print creating a unique look. There is a physical speckle dispersed throughout the filament to make your prints stand out. Gizmo Dorks Glitter PLA filament works with a wide range of common 3D printers. PLA (Polylactic Acid) is one of the most commonly used 3D printer material and for good reason. The widely used thermoplastic has a low melting temperature while also being virtually warp free. Glitter PLA does not have an odor like ABS and does not require a heated bed. Getting failed prints because of filament jams is a painful aspect of 3D printing. However, Gizmo Dorks Glitter PLA is specifically engineered to reduce jamming.Glitter PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. Glitter PLA is a more earth friendly plastic. It is stronger and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. Glitter PLA enjoys sharper details and corners compared to ABS without the risk of cracking or warping. Glitter PLA can also be printed at higher throughput speeds.The 200 gram spool is a perfect sample size to test out and try the filament before committing to a 1 kg version...

-Titulo Original : Gizmo Dorks PETG Filament for 3D Printers 1.75mm 5kg, Black-Fabricante : GIZMO DORKS-Descripcion Original: Recommended Nozzle Temperature: 230 - 260 C // PETG combines the benefits of ABS and PLA, increased strength and flexibility // Net weight: 5 kg / Spool Diameter: 11.75" / Spool Width: 6.25" / Spool Hub Diameter: 1.25" // PETG filament is compatible with various 3D printers such as the Monoprice Maker Select, Lulzbot, Flash Forge, and many more // Filament diameter - 1.75mm // Color: The Gizmo Dorks PETG filament is an updated cousin to PET (Polyethylene terephthalate) filament with enhanced properties. PETG has minimal shrinkage and warping. The filament has easy adhesion, so it can be printed on acrylic, glass, polyimide (Kapton) tape, blue tape, and other surfaces. PETG filament has a good combination of strength and flexibility, which is why it is used in latches and mechanical parts for snap fits. The filament is transparent with a glossy finish. It has chemical resistant properties, especially good acidic and alkalic resistance. Large prints tend to have less issues as well due to PETG having a shrink rate of less than 0.004 in/in. Printing Tips: Print speeds should be 50 mm/s or less. The slower the print speed, the more transparent the print will be.Extrusion temperature: 230°- 260°CHeated Bed Temperature: 80°CPrint Speed: 50mm/s or lessDiameter: 1.75mm +/- 0.03m...

-Titulo Original : Gizmo Dorks Nylon Filament For 3D Printers 3mm (2.85mm) 200g, Black-Fabricante : Gizmo Dorks-Descripcion Original: - El filamento de impresora 3D de nailon sellado al vacío con desecante es el filamento perfecto para usuarios intermedios que buscan piezas fuertes y resistentes - Temperatura de la boquilla de extrusión: 230 - 260 C; Recomendado para usar una plataforma de construcción calentada - Diámetro del filamento de 2,85 mm (Precisión dimensional de +/- 0,03 mm) - Peso neto: 200 gramos / Diámetro de la bobina: 6 / Ancho de la bobina: 1,5 / Diámetro del eje de la bobina: 2,25 - Compatible con la mayoría de las impresoras 3D como Monoprice Maker Select, Lulzbot, Flash Forge y muchas más. Las impresiones de nailon se pegarán a la cinta de pintor azul. Debido a que el nailon se adhiere a las superficies de celulosa, la madera de álamo se puede utilizar como cama. El nailon también se adherirá al cartón. El nailon también se adhiere muy bien a la garolita mecanizable, pero puede ser difícil de conseguir. Los usuarios también han dicho que usar una barra de pegamento en una cama de vidrio funciona bien. Los pegamentos de PVA (piense en el pegamento blanco de Elmer) también se pueden diluir y aplicar con una cabeza de esponja. Úselo en un área bien ventilada o en un sistema ventilado cerrado. Temperatura de extrusión: 230 - 260 C Cama caliente: 110 - 145 C ayuda a combatir la deformación del nailon Diámetro: 2,85 mm +/- 0,03 mm Peso neto: 200 gramos Colores disponibles en 200 g Tamaño: negro, natural, blanco El nailon es muy higroscópico. Cuando no esté en uso, guárdelo en un recipiente hermético. Gizmo Dorks ha lanzado con orgullo este filamento con un peso neto de 200 gramos. El carrete de menor peso permite a los usuarios probar la calidad y el color del filamento antes de comprometerse con un carrete más grande de 1 kilogramo...

-Titulo Original : 3m 300lse Double Sided Adhesive Transparent Tape Roll 2 Wide X 36 Ft, Heavy Duty, Heat Resistant, Waterproof For Picture Hanging Strips, Led Strips, Diy Art And Craft, Car Dcor, Electronics-Fabricante : Gizmo Dorks-Descripcion Original: - Grado industrial: la cinta adhesiva de doble cara de alta resistencia se adhiere rápidamente y es duradera, versátil y duradera. La cinta adhesiva de doble cara es una excelente alternativa a los sujetadores mecánicos y los adhesivos líquidos. Es más fácil de aplicar que taladrar, atornillar, repintar, soldar o pegar. Con poca o ninguna limpieza y sin sujetadores visibles para un acabado suave y limpio. - Fácil de aplicar: ya sea que se aplique a mano o con un dispensador, simplemente desenrolle y corte/arranque la longitud deseada de cinta adhesiva de doble cara. Aplique el lado adhesivo expuesto sobre la superficie con firmeza. Cuando esté listo para adherirse a la segunda superficie, retire el revestimiento kraft para exponer el adhesivo del lado posterior. La unión debe ser inmediata y aumentará en función del tiempo. - Multiusos: la cinta fina de dos caras es un adhesivo versátil para la mayoría de superficies de materiales como metal, vidrio, plásticos, madera, pvc, acero inoxidable, cerámica, superficies pintadas, papel, superficies ligeramente aceitosas, etc. Esta cinta es ideal para manualidades, bricolaje, fotos, álbumes de recortes, colgar carteles, modelismo, decoraciones de pared, carpintería, letreros, placas de identificación, reparación, instalación, tiras de luces LED, fijación de alfombras, unión de espuma, colgar marcos de fotos y mucho más. - Cinta de montaje transparente: el rollo de cinta transparente 300LSE consta de adhesivo resistente 9495LE con un revestimiento Kraft policapa n.º 83. La temperatura de aplicación ideal varía de 70 °F a 100 °F (21 °C a 38 °C), no se recomienda aplicar por debajo de 50 °F porque el adhesivo se vuelve demasiado firme. Sin embargo, una vez aplicado correctamente, el adhesivo se mantendrá a bajas temperaturas. Resistencia a temperaturas entre -20 °F y 200 °F - Rendimiento medioambiental: la cinta 300LSE es resistente al agua y a los rayos UV, lo que la convierte en la solución perfecta para montar placas de identificación en exteriores, molduras decorativas y tiras de luces LED, ya que el adhesivo no se ve afectado negativamente por la exposición a la lluvia o la luz solar. Esto también significa que es una cinta excelente para lugares húmedos como baños y duchas. La cinta 300LSE también tiene propiedades de resistencia química que se mantendrán firmes incluso cuando se expongan a aceite, ácidos suaves y álcalis. 1 roll...

-Titulo Original : Gizmo Dorks 3mm (2.85mm) Abs Filament 1kg / 2.2lb For 3d Printers, Conductive Black-Fabricante : Gizmo Dorks-Descripcion Original: - 3 mm de diámetro, 1 kg de peso neto, filamento ABS- Redondez del filamento: +/- 0,07 mm - Diámetro del filamento: +/- 0,05 mm - Temperatura de impresión recomendada: 230 - 240C, según el modelo de impresora- Compatible con RepRap, Makerbot, Afinia, Solidoodle o cualquier impresora 3D estándar basada en bobina ...

-Titulo Original : Gizmo Dorks 1.75mm ABS Filament 1kg / 2.2lb for 3D Printers, Conductive Black-Fabricante : GIZMO DORKS-Descripcion Original: 1.75mm diameter, 1kg net weight, ABS Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 230 - 240°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer // We provide the highest quality 3D printing materials such as ABS, PLA, HIPS, PVA, and more. Our filaments are run with tight tolerances. There are no air bubbles or oily residues. Every filament comes loaded on a durable, hard plastic spool, not a cheap, flimsy cardboard spool. ABS, Acrylonitrile Butadiene Styrene, is a favorite filament among 3D printer users because it is light weight and durable. It can be injection molded which makes it perfect for 3D printing extruders. It has a high glass transition temperature to reduce deformation, but it is also low enough to be safely attainable with standard 3D printers. ABS is a hard strong plastic with some flexibility when compared to PLA. It is also soluble in Acetone, and it can be easily sanded and machined. Compatible with RepRap, Makerbot, UP!, Lulzbot, Afinia, Solidoodle, MakerGear, Printrbot LC, and more! FAQ? Is the spindle hole large enough to fit my Makerbot printer? Yes! Our spindle holes are large enough to fit the Makerbot printers. You don't have to worry about fabricating a spindle extension any longer. *NOTE, these spools will not fit inside of the new Makerbot 5th generation printer drawers. You can still use these spools and feed the filament directly through the top of the printer. What other colors are available? ABS comes in a variety of different vibrant colors, 30 different options total. *New fluorescent colors are available. They glow under UV light, commonly known as black light. *New color changing filaments are available; the filaments will change colors at 31°C (88°F). The filament is one color below 31°C, and when it is heated above 31°C, the filament will change to another color. *New conductive ABS filament available. The conductive black ABS filament is exactly what the name implies. The conductive filament can be used for anti-static, static dissipative, and conduction of electric current...