-Titulo Original : Gizmo Dorks 3mm (2.85mm) ABS Filament, 1 kg for 3D Printers, Color Change Blue to White-Fabricante : GIZMO DORKS-Descripcion Original: 3mm nominal (2.85mm true) diameter, 1 kg net weight // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Print Temperature: 230 - 240°C // Platform Temperature: 90 - 110°C //...

-Titulo Original : Gizmo Dorks PETG Filament for 3D Printers 1.75mm 200g, White-Fabricante : GIZMO DORKS-Descripcion Original: PETG (Polyethylene Terepthalate Glycol-Modified) 3D printer filament vacuumed sealed with desiccant has high toughness with outstanding impact strength with little shrinkage compared to ABS // Extrusion nozzle temperature: 230 - 260 C // 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" // Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, and many more. // The Gizmo Dorks PETG filament is an updated cousin to PET (Polyethylene terephthalate) filament with enhanced properties. PETG has minimal shrinkage and warping. The filament has easy adhesion, so it can be printed on acrylic, glass, polyimide (Kapton) tape, blue tape, and other surfaces. PETG filament has a good combination of strength and flexibility, which is why it is used in latches and mechanical parts for snap fits . The filament is transparent with a glossy finish. It has chemical resistant properties, especially good acidic and alkalic resistance. Large prints tend to have less issues as well due to PETG having a shrink rate of less than 0.004 in/in. Printing Tips: Print speeds should be 50 mm/s or less. The slower the print speed, the more transparent the print will be.Extrusion temperature: 230°- 260°CHeated Bed Temperature: 80°CPrint Speed: 50mm/s or lessDiameter: 1.75mm +/- 0.03mmNet Weight: 200 gramsGizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool...

-Titulo Original : Gizmo Dorks Acetal Delrin Filament for 3D Printers 3mm (2.85mm) 200g, White-Fabricante : GIZMO DORKS-Descripcion Original: Acetal 3D printer filament vacuumed sealed with desiccant has high stiffness combined with extremely low friction // Extrusion nozzle temperature: 210 - 225 C; Recommended to use a heated build platform // 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" // Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, and many more. // Polyoxymethylene (POM) filament is also known as Acetal or Polyacetal. It is a commonly used thermoplastic to engineer specific parts. Acetal filament has high stiffness, low friction, and excellent wear resistance. It has good elastic resilience and great dimensional stability. Because of it's low friction, POM is routinely used as gear wheels, ball bearings, etc.Extrusion Settings - The recommended print temperature is between 210 C - 225 C. Please note that acetal degrades when overheated and may give off small amounts of formaldehyde gas. Do not keep acetal heated above 230 C. Therefore, please always use in a well ventilated area or in a ventilation system.Print Bed - The hardest part to printing acetal filament is getting the first layer to adhere. POM filament does not typically adhere to conventional 3D print bed surfaces. Some users have found success with blue painters tape with hairspray on top (different blue tapes and hairspray brands have different results). However, POM filament prefers wood or cellulose based platforms. Thicker weight paper such as resume paper or sketch paper can be glued to borosilicate glass with Elmer's glue stick. A heated bed should be used to at least 100 - 110 C.Special Note - POM filament warps a lot. An enclosed chamber should be used to retain heat for better layer adhesion and reduce delamination issues. Please keep acetal away from moisture and always keep filament in an airtight container with a desiccant.Extrusion Temperature: 210 - 225 CHeated Bed: 110 CPrint speeds : 30mm/sDiameter: 2.85mm +/- 0.03mmNet Weight: 200 gramsAvailable Colors in 200g Size: Black and WhiteGizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool...

-Titulo Original : Gizmo Dorks Polycarbonate Filament for 3D Printers 1.75mm 200g, Black-Fabricante : GIZMO DORKS-Descripcion Original: Polycarbonate 3D printer filament vacuumed sealed with desiccant is tough, strong filament that has high heat resistance // Extrusion nozzle temperature: 255 - 300 C // 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" // Printed parts made with Gizmo Dorks Polycarbonate filament have increased mechanical strength compared to ABS and PLA // The Gizmo Dorks Polycarbonate filament, also known as PC filament, is an incredibly strong thermoplastic material used in 3D printing. It is a good electrical insulator while having heat-resistant properties. Polycarbonate is used in a whole host of applications such as data storage, phones, eye protection, bullet-proof glass, and more. Polycarbonate has a high temperature resistance for a thermoplastic, and it does not shatter like plexiglass. It tends to bend and deform similar to hard rubber until it eventually breaks. It also has high optical clarity.PC absorbs a lot of moisture in the air. It is a hygroscopic material, and it is best to store in an airtight container when not in use. Even during use the material can become unprintable within a 24 hour print if in a humid environment. Therefore, keeping in an airtight container during printing as well is ideal. Dry filament will print more clear. Filament that has absorbed moisture will print white as well as pop and bubble during the print.Extruding temperature is generally around 260 C, depending on the printer. PC slowly softens when heated, unlike PLA which has a high transition temperature. Slower print speeds are preferred as an increase in temperature is required for faster prints. Polyimide tape (Kapton) should be used on a heated bed, ~120 C. Some users prefer applying glue or superglue on a glass bed and then heating to ~120 C-130 C. Please do not inhale any fumes. Heated up superglue can release toxic fumes, so only use in a well ventilated area.Extrusion Temperature: 255 - 300 CHeated Bed: 100 - 120 CDiameter: 1.75mm +/- 0.03mmColors: Black, Blue, or TransparentNet Weight: 200 gramsGizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to sample the filament quality and color before committing to a larger 1 kilogram spool...

-Titulo Original : Gizmo Dorks 1.75mm Hips Filament 1kg / 2.2lb for 3D Printers, Glow in The Dark Green-Fabricante : GIZMO DORKS-Descripcion Original: 1.75mm diameter, 1kg net weight, HIPS Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 210 - 230°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...

-Titulo Original : Gizmo Dorks 1.75 mm ABS Filament, 1 kg for 3D Printers, Natural Beige-Fabricante : GIZMO DORKS-Descripcion Original: 1.75 mm diameter, 1 kg net weight // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Print Temperature: 230 - 240°C // Platform Temperature: 90 - 110°C //...

-Titulo Original : Gizmo Dorks 3mm (2.85mm) Hips Filament 1kg / 2.2lb for 3D Printers, Green-Fabricante : GIZMO DORKS-Descripcion Original: 3mm diameter, 1kg net weight, HIPS Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 210 - 230°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...

-Titulo Original : Gizmo Dorks 1.75mm Hips Filament 1kg / 2.2lb for 3D Printers, Brown-Fabricante : GIZMO DORKS-Descripcion Original: 1.75mm diameter, 1kg net weight, HIPS Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 210 - 230°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...

-Titulo Original : Gizmo Dorks Hips Filament for 3D Printers 3mm (2.85mm) 5kg, Gray-Fabricante : GIZMO DORKS-Descripcion Original: HIPS (High Impact Polystyrene) 3D printer filament vacuumed sealed with desiccant // Extrusion nozzle temperature: 225 - 250 C; Recommended to use a heated build platform // 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 5kg / Spool Diameter: 11.75" / Spool Width: 6.25" / Spool Hub Diameter: 1.25" // HIPS filament is compatible with various 3D printers such as the Monoprice Maker Select, Lulzbot, Flash Forge, and many more! // HIPS, High Impact Polystyrene, is very similar to ABS. They share a lot of the same characteristics and qualities. However, one of the biggest differences is the solvent used to dissolve HIPS. Limonene is used with HIPS instead of Acetone for ABS. Since limonene does not affect ABS, HIPS filament is commonly used as a supporting material. HIPS is versatile, economical, and impact resistant as well as a good alternative to ABS.Extrusion Temperature: 225 - 250 CHeated Bed: 80 - 110 CDiameter: 2.85mm +/- 0.03mmNet Weight: 5 kilogramsAvailable Colors in 5kg Size: Black, Gray, WhiteGizmo Dorks has proudly released this filament with a net weight 5 kilograms. The larger amount of filament allows continuous prints without the need to swap out spools. It's perfect for larger builds...

-Titulo Original : Gizmo Dorks 1.75mm PLA Filament 1kg / 2.2lb for 3D Printers, Yellow-Fabricante : GIZMO DORKS-Descripcion Original: 1.75mm diameter, 1kg net weight, PLA Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 200 - 210°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...

-Titulo Original : Gizmo Dorks 1.75mm PETG Filament 1kg /2.2lbs for 3D Printers, Translucent Blue-Fabricante : GIZMO DORKS-Descripcion Original: Recommended Print Temperature: 230 - 260 C // PETG (Polyethylene Terepthalate Glycol-Modified) 3D printer filament vacuumed sealed with desiccant has high toughness with outstanding impact strength with little shrinkage compared to ABS // 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, Creality, and many more. // Print Speed: 50 mm/s or less for best results //...

-Titulo Original : Gizmo Dorks Hips Filament for 3D Printers 3mm (2.85mm) 5kg, Black-Fabricante : GIZMO DORKS-Descripcion Original: HIPS (High Impact Polystyrene) 3D printer filament vacuumed sealed with desiccant // Extrusion nozzle temperature: 225 - 250 C; Recommended to use a heated build platform // 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 5kg / Spool Diameter: 11.75" / Spool Width: 6.25" / Spool Hub Diameter: 1.25" // HIPS filament is compatible with various 3D printers such as the Monoprice Maker Select, Lulzbot, Flash Forge, and many more! // HIPS, High Impact Polystyrene, is very similar to ABS. They share a lot of the same characteristics and qualities. However, one of the biggest differences is the solvent used to dissolve HIPS. Limonene is used with HIPS instead of Acetone for ABS. Since limonene does not affect ABS, HIPS filament is commonly used as a supporting material. HIPS is versatile, economical, and impact resistant as well as a good alternative to ABS.Extrusion Temperature: 225 - 250 CHeated Bed: 80 - 110 CDiameter: 2.85mm +/- 0.03mmNet Weight: 5 kilogramsAvailable Colors in 5kg Size: Black, Gray, WhiteGizmo Dorks has proudly released this filament with a net weight 5 kilograms. The larger amount of filament allows continuous prints without the need to swap out spools. It's perfect for larger builds...

-Titulo Original : Gizmo Dorks 3mm (2.85mm) PC Polycarbonate Filament 1kg / 2.2lbs for 3D Printers, Blue-Fabricante : GIZMO DORKS-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...

-Titulo Original : Gizmo Dorks PETG Filament for 3D Printers 1.75mm 5kg, White-Fabricante : GIZMO DORKS-Descripcion Original: Recommended Nozzle Temperature: 230 - 260 C // PETG combines the benefits of ABS and PLA, increased strength and flexibility // Net weight: 5 kg / Spool Diameter: 11.75" / Spool Width: 6.25" / Spool Hub Diameter: 1.25" // PETG filament is compatible with various 3D printers such as the Monoprice Maker Select, Lulzbot, Flash Forge, and many more // Filament diameter - 1.75mm // Color: The Gizmo Dorks PETG filament is an updated cousin to PET (Polyethylene terephthalate) filament with enhanced properties. PETG has minimal shrinkage and warping. The filament has easy adhesion, so it can be printed on acrylic, glass, polyimide (Kapton) tape, blue tape, and other surfaces. PETG filament has a good combination of strength and flexibility, which is why it is used in latches and mechanical parts for snap fits. The filament is transparent with a glossy finish. It has chemical resistant properties, especially good acidic and alkalic resistance. Large prints tend to have less issues as well due to PETG having a shrink rate of less than 0.004 in/in. Printing Tips: Print speeds should be 50 mm/s or less. The slower the print speed, the more transparent the print will be.Extrusion temperature: 230°- 260°CHeated Bed Temperature: 80°CPrint Speed: 50mm/s or lessDiameter: 1.75mm +/- 0.03m...

-Titulo Original : Gizmo Dorks ABS Filament for 3D Printers 3mm (2.85mm) 5kg, White-Fabricante : GIZMO DORKS-Descripcion Original: ABS (Acrylonitrile Butadiene Styrene) 3D printer filament vacuumed sealed with desiccant // Extrusion nozzle temperature: 225 - 250 C; Recommended to use a heated build platform // 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 5kg / Spool Diameter: 11.75" / Spool Width: 6.25" / Spool Hub Diameter: 1.25" // ABS filament is compatible with various 3D printers such as the Monoprice Maker Select, Lulzbot, Flash Forge, and many more! // ABS filament is made of top notch pure ABS resin. Our ABS resins are of the highest quality and produced with the utmost purity. ABS, Acrylonitrile Butadiene Styrene, is a favorite filament among 3D printer users because it is light weight and durable. It can be injection molded which makes it perfect for 3D printing extruders. It has a high glass transition temperature to reduce deformation, but it is also low enough to be safely attainable with standard 3D printers. ABS is a hard strong plastic with some flexibility when compared to PLA. It is also soluble in Acetone, and it can be easily sanded and machined. ABS is one of the most widely used plastics in 3D printing and for good reason. It is a strong plastic that has a decent amount of flex. The filament extrudes easily and smoothly with very little stringing or oozing. ABS does cool and shrink after extrusion, so it must be printed on a heated bed and preferably within an enclosed-case.Extrusion Temperature: 225 - 250 CHeated Bed: 80 - 110 CDiameter: 2.85mm +/- 0.03mmNet Weight: 5 kilogramsAvailable Colors in 5kg Size: Black, Gray, WhiteGizmo Dorks has proudly released this filament with a net weight 5 kilograms. The larger amount of filament allows continuous prints without the need to swap out spools. It's perfect for larger builds...

-Titulo Original : Gizmo Dorks 1.75mm Hips Filament 1kg / 2.2lb for 3D Printers, Blue-Fabricante : GIZMO DORKS-Descripcion Original: 1.75mm diameter, 1kg net weight, HIPS Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 210 - 230°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...

-Titulo Original : Gizmo Dorks 3mm (2.85mm) ABS Filament 1kg / 2.2lb for 3D Printers, Green Grass-Fabricante : GIZMO DORKS-Descripcion Original: 3mm diameter, 1kg net weight, ABS Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 230 - 240°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...

-Titulo Original : Gizmo Dorks 1.75 mm PLA Filament, 1 kg for 3D Printers, Light Yellow-Fabricante : GIZMO DORKS-Descripcion Original: 1.75 mm diameter, 1 kg net weight // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Print Temperature: 220 - 225°C // Heated Platform Not Required //...

-Titulo Original : Gizmo Dorks 3mm (2.85mm) Hips Filament 1kg / 2.2lb for 3D Printers, Red-Fabricante : GIZMO DORKS-Descripcion Original: 3mm diameter, 1kg net weight, HIPS Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 210 - 230°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...

-Titulo Original : Gizmo Dorks Polycarbonate Filament for 3D Printers 3mm (2.85mm) 200g, Transparent-Fabricante : GIZMO DORKS-Descripcion Original: Polycarbonate 3D printer filament vacuumed sealed with desiccant is tough, strong filament that has high heat resistance // Extrusion nozzle temperature: 255 - 300 C // 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" // Printed parts made with Gizmo Dorks Polycarbonate filament have increased mechanical strength compared to ABS and PLA // The Gizmo Dorks Polycarbonate filament, also known as PC filament, is an incredibly strong thermoplastic material used in 3D printing. It is a good electrical insulator while having heat-resistant properties. Polycarbonate is used in a whole host of applications such as data storage, phones, eye protection, bullet-proof glass, and more. Polycarbonate has a high temperature resistance for a thermoplastic, and it does not shatter like plexiglass. It tends to bend and deform similar to hard rubber until it eventually breaks. It also has high optical clarity.PC absorbs a lot of moisture in the air. It is a hygroscopic material, and it is best to store in an airtight container when not in use. Even during use the material can become unprintable within a 24 hour print if in a humid environment. Therefore, keeping in an airtight container during printing as well is ideal. Dry filament will print more clear. Filament that has absorbed moisture will print white as well as pop and bubble during the print.Extruding temperature is generally around 260 C, depending on the printer. PC slowly softens when heated, unlike PLA which has a high transition temperature. Slower print speeds are preferred as an increase in temperature is required for faster prints. Polyimide tape (Kapton) should be used on a heated bed, ~120 C. Some users prefer applying glue or superglue on a glass bed and then heating to ~120 C-130 C. Please do not inhale any fumes. Heated up superglue can release toxic fumes, so only use in a well ventilated area.Extrusion Temperature: 255 - 300 CHeated Bed: 100 - 120 CDiameter: 2.85mm +/- 0.03mmColors: Black, Blue, or TransparentNet Weight: 200 gramsGizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to sample the filament quality and color before committing to a larger 1 kilogram spool...

-Titulo Original : Gizmo Dorks 3 mm PLA Filament, 1 kg for 3D Printers, Opaque Orange-Fabricante : GIZMO DORKS-Descripcion Original: 2.85 mm diameter, 1 kg net weight // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Print Temperature: 220 - 225°C // Heated Platform Not Required //...

-Titulo Original : Gizmo Dorks 3mm (2.85mm) Nylon Filament 1kg / 2.2lbs for 3D Printers, Black-Fabricante : GIZMO DORKS-Descripcion Original: 【Compatibility】Precise designed for Samsung Galaxy S10 ONLY, Sensitive touch screen and comfortable buttons. // 【DAILY WATERPROOF】: 2019 New design for Samsung S10. This cases is heavy bulky but tough. It not completely sealed case Which only Protect your phone from water or rain in deily use,Please didn't put your phone in the water. // 【MULTI-PROTECTION】: Full body protection designed to exceed Military Standard 810G-516, safe guard your Galaxy S10 even after 1000 times drop from 6.6ft/2m height. The case is also Snow/Dirt/Dustproof, rugged to adapt to all harsh environments. // 【Fashion DESIGN】Military Grade Protection Professional grade materials. Made of premium hybrid hard Metal + Silicone to provide great texture while providing accidental drops, shocks and bumps. // 【Accurate Button & Wireless Charging Compatible】: Precise cut outs for mute, power, volume and home button. Working with the wireless charger for Samsung Galaxy S10 without any problem while with this case. // Color: Compatible with Samsung Galaxy S10 2019 version, completely fit in with S10 speaker, buttons, sensors and cameras. Dual layer Silicone+Metal Bumper rugged heavy duty protection provides accidental drops, shocks and bumps. Added drop-defense at each corner and a raised edge to protect the screen. Withstanding shock and drop from 6.6 ft high.Fully protect your Phone in all harsh environments Easy to snap on and take off, special sound enhancement system provides the best call and audio quality. Sealed from snow, ice, dirt & dust particles, meets IP-54 Ingress Protection Rating. Perfect for any underwater use&outdoor sports. Built-in protector remains the original touch response with good touch sensitivity. Slim shape that make you can handle the phone with one hand. *TIPS: 2. Please use the original size charge cable. Please pay attention to the width of your charging cable. If the width of your charging cable is longer than case's charging port, the charging cable may can 't charge your phone directly...

-Titulo Original : Gizmo Dorks 3mm (2.85mm) ABS Filament 1kg / 2.2lb for 3D Printers, Brown-Fabricante : GIZMO DORKS-Descripcion Original: 3mm diameter, 1kg net weight, ABS Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 230 - 240°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...

-Titulo Original : Gizmo Dorks 3 mm PLA Filament, 1 kg for 3D Printers, Light Yellow-Fabricante : GIZMO DORKS-Descripcion Original: 2.85 mm diameter, 1 kg net weight // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Print Temperature: 220 - 225°C // Heated Platform Not Required //...