-Titulo Original : Gizmo Dorks Glitter PLA 3D Printer Filament 3mm (2.85mm) 200g, Gray-Fabricante : GIZMO DORKS-Descripcion Original: Glitter PLA nozzle temperature range 195 - 225 C; filament diameter of 2.85 mm +/- .03 mm // Thermoplastic PLA is commonly used in 3D printing because of it's low melting temperature, odorless, and low warp // 200 gram net weight is the perfect sample size to try out filament // Gizmo Dorks PLA is specially formulated and engineered to prevent and reduce jamming // Spool dimensions are 6 inches by 1.5 inches with a 2.25 inch spindle diameter; the net weight of the filament is 200 grams // Size:  |  Color: Glitter PLA adds a new dimension or sparkle to your print. The PLA glitter colors add a glimmer or twinkle throughout the print creating a unique look. There is a physical speckle dispersed throughout the filament to make your prints stand out. Gizmo Dorks Glitter PLA filament works with a wide range of common 3D printers. PLA (Polylactic Acid) is one of the most commonly used 3D printer material and for good reason. The widely used thermoplastic has a low melting temperature while also being virtually warp free. Glitter PLA does not have an odor like ABS and does not require a heated bed. Getting failed prints because of filament jams is a painful aspect of 3D printing. However, Gizmo Dorks Glitter PLA is specifically engineered to reduce jamming.Glitter PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. Glitter PLA is a more earth friendly plastic. It is stronger and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. Glitter PLA enjoys sharper details and corners compared to ABS without the risk of cracking or warping. Glitter PLA can also be printed at higher throughput speeds.The 200 gram spool is a perfect sample size to test out and try the filament before committing to a 1 kg version...

-Titulo Original : Gizmo Dorks PLA Pro Plus 3D Printer Filament 3mm (2.85mm) 200g, Engineering Grade White-Fabricante : GIZMO DORKS-Descripcion Original: PLA Pro Plus filament is an engineering grade thermoplastic specially formulated for increased strength and impact resistance compared to standard PLA // Thorouhly tested and manufactured to deliver superb layer adhesion with superior flexibility which prevents typical brittleness in PLA // 200 gram net weight is the perfect sample size to try out filament // Nozzle temperature range 195 - 225 C; filament diameter of 2.85 mm +/- .03 mm // Spool dimensions are 6 inches by 1.5 inches with a 2.25 inch spindle diameter; the net weight of the filament is 200 grams // Gizmo Dorks PLA Pro Plus filament is an engineering grade filament. PLA Pro Plus is not your typical pro grade filament offered by other brands. Gizmo Dorks PLA Pro Plus has increased strength and impact resistance over regular PLA. The filament features superior layer bonding never before achieved. Regular PLA is typically very brittle, which is simply a characteristic of the thermoplastic. PLA Pro Plus has outstanding flexibility to combat the brittleness even after long term storage. Toughness is a mechanical property defined as a material's resistance to fracture, and PLA Pro Plus has 10 times the toughness versus basic PLA. It also has increased stiffness and rigidity and is designed to reduce jamming in the hot end. All of these attributes combine with the normal benefits of PLA such as being virtually warp free to create the perfect 3D printer filament.PLA Pro Plus works with a wide range of common 3D printers. The filament is considered a more earth friendly plastic as it can be composted at commercial facilities unlike ABS which is derived from fossil fuels. PLA Pro Plus enjoys sharp details and corners without the risk of cracking or warping. The engineering grade filament can be printed at typical higher throughput speeds just like normal PLA. PLA Pro Plus still maintains an excellent low melting temperature while being odor free unlike ABS. A heated bed is not required but depending on the part and bed surface type it is recommended. The 200 gram spool is a perfect sample size to test out and try the filament before committing to a 1 kg version.Hot End Temperature: 195 - 225 CHeated Bed: Not requiredAfter many requests for a smaller sample spool, Gizmo Dorks has proudly released this filament with a net weight of 200 grams per spool. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool...

-Titulo Original : Gizmo Dorks Glitter PLA 3D Printer Filament 3mm (2.85mm) 1kg, Blue-Fabricante : GIZMO DORKS-Descripcion Original: Glitter PLA nozzle temperature range 195 - 225 C; filament diameter of 2.85 mm +/- .03 mm // Thermoplastic PLA is commonly used in 3D printing because of it's low melting temperature, odorless, and low warp // The uniquely designed clear spool is see through so you can see how much filament material is left and comes with a resealable containment bag to protect filament in between uses // Gizmo Dorks PLA is specially formulated and engineered to prevent and reduce jamming // Spool dimensions are 195 mm x 63 mm with a 55 mm spindle diameter; the net weight of the filament is 1 kg which is 2.2 pounds // Size:  |  Color: Glitter PLA adds a new dimension or sparkle to your print. The PLA glitter colors add a glimmer or twinkle throughout the print creating a unique look. There is a physical speckle dispersed throughout the filament to make your prints stand out. Gizmo Dorks Glitter PLA filament works with a wide range of common 3D printers. PLA (Polylactic Acid) is one of the most commonly used 3D printer material and for good reason. The widely used thermoplastic has a low melting temperature while also being virtually warp free. Glitter PLA does not have an odor like ABS and does not require a heated bed. Getting failed prints because of filament jams is a painful aspect of 3D printing. However, Gizmo Dorks Glitter PLA is specifically engineered to reduce jamming.Glitter PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. Glitter PLA is a more earth friendly plastic. It is stronger and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. Glitter PLA enjoys sharper details and corners compared to ABS without the risk of cracking or warping. Glitter PLA can also be printed at higher throughput speeds...

-Titulo Original : Gizmo Dorks 1.75mm PLA Filament 1kg / 2.2lb for 3D Printers, Fluorescent Red-Fabricante : GIZMO DORKS-Descripcion Original: 1.75mm diameter, 1kg net weight, PLA Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 200 - 210°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...

-Titulo Original : Gizmo Dorks 1.75mm PLA Filament 1kg / 2.2lb for 3D Printers, Glow in The Dark-Fabricante : GIZMO DORKS-Descripcion Original: 1.75mm diameter, 1kg net weight, PLA Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 200 - 210°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...

-Titulo Original : Gizmo Dorks 3mm (2.85mm) ABS Filament 1kg / 2.2lb for 3D Printers, Fluorescent Green (UV Light)-Fabricante : GIZMO DORKS-Descripcion Original: 3mm diameter, 1kg net weight, ABS Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 230 - 240°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...

-Titulo Original : Gizmo Dorks Glitter PLA 3D Printer Filament 1.75mm 1kg, Blue-Fabricante : GIZMO DORKS-Descripcion Original: Glitter PLA nozzle temperature range 195 - 225 C; filament diameter of 1.75 mm +/- .03 mm // Thermoplastic PLA is commonly used in 3D printing because of it's low melting temperature, odorless, and low warp // The uniquely designed clear spool is see through so you can see how much filament material is left and comes with a resealable containment bag to protect filament in between uses // Gizmo Dorks PLA is specially formulated and engineered to prevent and reduce jamming // Spool dimensions are 195 mm x 63 mm with a 55 mm spindle diameter; the net weight of the filament is 1 kg which is 2.2 pounds // Size:  |  Color: Glitter PLA adds a new dimension or sparkle to your print. The PLA glitter colors add a glimmer or twinkle throughout the print creating a unique look. There is a physical speckle dispersed throughout the filament to make your prints stand out. Gizmo Dorks Glitter PLA filament works with a wide range of common 3D printers. PLA (Polylactic Acid) is one of the most commonly used 3D printer material and for good reason. The widely used thermoplastic has a low melting temperature while also being virtually warp free. Glitter PLA does not have an odor like ABS and does not require a heated bed. Getting failed prints because of filament jams is a painful aspect of 3D printing. However, Gizmo Dorks Glitter PLA is specifically engineered to reduce jamming.Glitter PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. Glitter PLA is a more earth friendly plastic. It is stronger and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. Glitter PLA enjoys sharper details and corners compared to ABS without the risk of cracking or warping. Glitter PLA can also be printed at higher throughput speeds...

-Titulo Original : Gizmo Dorks 1.75mm PETG Filament 1kg /2.2lbs for 3D Printers, Translucent Red-Fabricante : GIZMO DORKS-Descripcion Original: Recommended Print Temperature: 230 - 260 C // PETG (Polyethylene Terepthalate Glycol-Modified) 3D printer filament vacuumed sealed with desiccant has high toughness with outstanding impact strength with little shrinkage compared to ABS // 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, Creality, and many more. // Print Speed: 50 mm/s or less for best results //...

-Titulo Original : Gizmo Dorks 1.75mm ABS Filament 1kg / 2.2lb for 3D Printers, Green Grass-Fabricante : GIZMO DORKS-Descripcion Original: 1.75mm diameter, 1kg net weight, ABS Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 230 - 240°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...

-Titulo Original : Gizmo Dorks 3mm (2.85mm) Hips Filament 1kg / 2.2lb for 3D Printers, White-Fabricante : GIZMO DORKS-Descripcion Original: 3mm diameter, 1kg net weight, HIPS Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 210 - 230°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...

-Titulo Original : Gizmo Dorks PLA Filament for 3D Printers 3mm (2.85mm) 200g, Transparent-Fabricante : GIZMO DORKS-Descripcion Original: PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant // Recommended Nozzle Temperature: 190 - 225 C // 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" // PLA filament is compatible with various 3D printers such as the Monoprice Maker Select, Printrbot, Robo 3D, and many more! // PLA filament is made from the highest quality virgin material. PLA, Polylactic Acid, is created from processing a number of plant products. PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. PLA is a more earth friendly plastic and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. PLA can be sanded and machined. PLA has a lower melting temperature compared to ABS. As a material, PLA has much less warping versus ABS. Additionally, a heated bed is not required to print it. PLA generally enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds.Extrusion Temperature: 190 - 225 CHeated Bed: Not required but recommended at 60 CDiameter: 2.85mm +/- 0.03mmNet Weight: 200 gramsAvailable Colors in 200g Size: Black, Blue, Glow in the Dark, Green, Grey, Orange, Purple, Red, Transparent, and WhiteGizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool...

-Titulo Original : Gizmo Dorks Glitter PLA 3D Printer Filament 1.75mm 200g, Gray-Fabricante : GIZMO DORKS-Descripcion Original: Glitter PLA nozzle temperature range 195 - 225 C; filament diameter of 1.75 mm +/- .03 mm // Thermoplastic PLA is commonly used in 3D printing because of it's low melting temperature, odorless, and low warp // 200 gram net weight is the perfect sample size to try out filament // Gizmo Dorks PLA is specially formulated and engineered to prevent and reduce jamming // Spool dimensions are 6 inches by 1.5 inches with a 2.25 inch spindle diameter; the net weight of the filament is 200 grams // Size:  |  Color: Glitter PLA adds a new dimension or sparkle to your print. The PLA glitter colors add a glimmer or twinkle throughout the print creating a unique look. There is a physical speckle dispersed throughout the filament to make your prints stand out. Gizmo Dorks Glitter PLA filament works with a wide range of common 3D printers. PLA (Polylactic Acid) is one of the most commonly used 3D printer material and for good reason. The widely used thermoplastic has a low melting temperature while also being virtually warp free. Glitter PLA does not have an odor like ABS and does not require a heated bed. Getting failed prints because of filament jams is a painful aspect of 3D printing. However, Gizmo Dorks Glitter PLA is specifically engineered to reduce jamming.Glitter PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. Glitter PLA is a more earth friendly plastic. It is stronger and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. Glitter PLA enjoys sharper details and corners compared to ABS without the risk of cracking or warping. Glitter PLA can also be printed at higher throughput speeds.The 200 gram spool is a perfect sample size to test out and try the filament before committing to a 1 kg version...

-Titulo Original : Gizmo Dorks 3mm (2.85mm) ABS Filament 1kg / 2.2lb for 3D Printers, Transparent-Fabricante : GIZMO DORKS-Descripcion Original: 3mm diameter, 1kg net weight, ABS Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 230 - 240°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...

-Titulo Original : Gizmo Dorks 3mm (2.85mm) Hips Filament 1kg / 2.2lb for 3D Printers, Black-Fabricante : GIZMO DORKS-Descripcion Original: 3mm diameter, 1kg net weight, HIPS Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 210 - 230°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...

-Titulo Original : Gizmo Dorks 1.75mm ABS Filament 1kg / 2.2lb for 3D Printers, Fluorescent Green (UV Light)-Fabricante : GIZMO DORKS-Descripcion Original: 1.75mm diameter, 1kg net weight, ABS Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 230 - 240°C, depending on printer model // Filament glows under black light (UV light) //...

-Titulo Original : Gizmo Dorks 1.75mm Carbon Fiber Fill Filament, 1 kg for 3D Printers-Fabricante : GIZMO DORKS-Descripcion Original: Ideal for 3D prints that require a stiff part // Superior strength carbon fiber filament while being extremely lightweight // Produces 3D prints with excellent dimensional stability // Beautiful matte black finished parts that conceal ugly 3D printed layer lines // Extrusion Temp: 200-220°C, Platform Temp: 100-120°C, Nozzle Size Minimum: .04mm // Gizmo Dorks carbon fiber filament is a new blended filament that yields high quality prints. The ABS base material is blended with approximately 20% of high modulus carbon fiber. The chopped up carbon fiber adds dimensional stability and increased stiffness. The light weight carbon fiber is easy to print and results in excellent surface quality.As with all Gizmo Dorks products, carbon fiber filled filament is only produced using the highest grade raw materials. Precision leading equipment measures and controls diameter tolerances. The filament will be free of voids and cavities that cause uneven printing and lead to failures. Each hard durable plastic spool comes vacuum sealed and packed with a desiccant to prevent moisture absorption. When not in use, please store filament properly in a sealed container.Please note - carbon fiber filled filaments are abrasive and may lead to premature wear in brass or aluminum nozzles. We recommend using hardened steel nozzles as they are much more wear resistant.Extruder temperature: 200 - 220°CBed temperature: 100 - 120°CSpeed: 50 - 80 mm/sNozzle size: Minimum 0.4 mmWall thickness: 0.8 mmLayer thickness: 0.1 mmBed preparation: Kapton Tape and/or ABS juice slurryDiameter: 1.75mm +/- 0.05mmNet weight: 1 k...

-Titulo Original : Gizmo Dorks PLA Filament for 3D Printers 1.75mm 5kg, Black-Fabricante : GIZMO DORKS-Descripcion Original: PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant // Recommended Nozzle Temperature: 190 - 225 C // 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 5kg / Spool Diameter: 11.75" / Spool Width: 6.25" / Spool Hub Diameter: 1.25" // PLA filament is compatible with various 3D printers such as the Monoprice Maker Select, Printrbot, Robo 3D, and many more! // PLA filament is made from the highest quality virgin material. PLA, Polylactic Acid, is created from processing a number of plant products. PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. PLA is a more earth friendly plastic and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. PLA can be sanded and machined. PLA has a lower melting temperature compared to ABS. As a material, PLA has much less warping versus ABS. Additionally, a heated bed is not required to print it. PLA generally enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds.Extrusion Temperature: 190 - 225 CHeated Bed: Not required but recommended at 60 CDiameter: 1.75mm +/- 0.03mmNet Weight: 5 kilogramsAvailable Colors in 5kg Size: Black, Gray, WhiteGizmo Dorks has proudly released this filament with a net weight 5 kilograms. The larger amount of filament allows continuous prints without the need to swap out spools. It's perfect for larger builds...

-Titulo Original : Gizmo Dorks 3mm (2.85mm) PETG Filament 1kg / 2.2lbs for 3D Printers, Transparent-Fabricante : GIZMO DORKS-Descripcion Original: Recommended Print Temperature: 230 - 260 C // PETG (Polyethylene Terepthalate Glycol-Modified) 3D printer filament vacuumed sealed with desiccant has high toughness with outstanding impact strength with little shrinkage compared to ABS // 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, Creality, and many more. // Print Speed: 50 mm/s or less for best results //...

-Titulo Original : Gizmo Dorks Marble PLA 3D Printer Filament 3mm (2.85mm) 1kg, White-Fabricante : GIZMO DORKS-Descripcion Original: Marble PLA nozzle temperature range 195 - 225 C; filament diameter of 2.85 mm +/- .03 mm // Thermoplastic PLA is commonly used in 3D printing because of it's low melting temperature, odorless, and low warp // 200 gram net weight is the perfect sample size to try out filament // Gizmo Dorks PLA is specially formulated and engineered to prevent and reduce jamming // Spool dimensions are 195 mm x 63 mm with a 55 mm spindle diameter; the net weight of the filament is 1 kg which is 2.2 pounds // Gizmo Dorks PLA filament works with a wide range of common 3D printers. PLA (Polylactic Acid) is one of the most commonly used 3D printer material and for good reason. The widely used thermoplastic has a low melting temperature while also being virtually warp free. PLA does not have an odor like ABS and does not require a heated bed. Getting failed prints because of filament jams is a painful aspect of 3D printing. However, Gizmo Dorks PLA is specifically engineered to reduce jamming.PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. PLA is a more earth friendly plastic. It is stronger and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. PLA enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds.Marble PLA adds a new dimension to your print. The PLA marble color adds a realistic marble visualization to the 3D printed part. The subtle marble tones is randomly dispersed throughout the print creating a unique look. When done using the spool, you can store the PLA filament in the resealable bag to ensure optimal containment. The unique clear see through spool allows you to always see how much filament is left...

-Titulo Original : Gizmo Dorks 1.75mm PLA Filament 1kg / 2.2lb for 3D Printers, Fluorescent Blue (UV Light)-Fabricante : GIZMO DORKS-Descripcion Original: 1.75mm diameter, 1kg net weight, PLA Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 200 - 210°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...

-Titulo Original : Gizmo Dorks 3mm (2.85mm) PLA Filament 1kg / 2.2lb for 3D Printers, Translucent Blue-Fabricante : GIZMO DORKS-Descripcion Original: 3mm diameter, 1kg net weight, PLA Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 200 - 210°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...

-Titulo Original : Gizmo Dorks 1.75mm ABS Filament 1kg / 2.2lb for 3D Printers, Dark Blue-Fabricante : GIZMO DORKS-Descripcion Original: 1.75mm diameter, 1kg net weight, ABS Filament // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Recommended Print Temperature: 230 - 240°C, depending on printer model // Compatible with RepRap, Makerbot, Afinia, Solidoodle or any standard spool based 3D printer //...

-Titulo Original : Gizmo Dorks 3 mm PLA Filament, 1 kg for 3D Printers, Opaque Pink-Fabricante : GIZMO DORKS-Descripcion Original: 2.85 mm diameter, 1 kg net weight // Filament Roundness: +/- 0.07mm // Filament Diameter: +/- 0.05mm // Print Temperature: 220 - 225°C // Heated Platform Not Required //...

-Titulo Original : Gizmo Dorks PLA Filament for 3D Printers 3mm (2.85mm) 200g, Red-Fabricante : GIZMO DORKS-Descripcion Original: PLA (Polylactic Acid) 3D printer filament vacuumed sealed with desiccant // Recommended Nozzle Temperature: 190 - 225 C // 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm) // Net weight: 200 grams / Spool Diameter: 5.125" / Spool Width: 2" / Spool Hub Diameter: 1.5" // PLA filament is compatible with various 3D printers such as the Monoprice Maker Select, Printrbot, Robo 3D, and many more! // PLA filament is made from the highest quality virgin material. PLA, Polylactic Acid, is created from processing a number of plant products. PLA can be composted at commercial facilities unlike ABS which is derived from fossil fuels. PLA is a more earth friendly plastic and more rigid than ABS, and in general the printed objects will have a more glossy look and feel compared to ABS. PLA can be sanded and machined. PLA has a lower melting temperature compared to ABS. As a material, PLA has much less warping versus ABS. Additionally, a heated bed is not required to print it. PLA generally enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds.Extrusion Temperature: 190 - 225 CHeated Bed: Not required but recommended at 60 CDiameter: 2.85mm +/- 0.03mmNet Weight: 200 gramsAvailable Colors in 200g Size: Black, Blue, Glow in the Dark, Green, Grey, Orange, Purple, Red, Transparent, and WhiteGizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool...