-Titulo Original : SMALLRIG Super Clamp w/1/4 and 3/8 Thread for Cameras, Lights, Umbrellas, Hooks, Shelves, Plate Glass, Cross Bars, etc - 735-Fabricante : SMALLRIG-Descripcion Original: The clamp is made of Aluminum Alloy. The metal makes it sturdier and stronger. // Versatility: Mounts onto anything like cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps. It's up to your imagination & inventive ideas. // The jaw opens to max about 2.3" (58mm), and minimum 15mm rods. You can clip it on anything less than 58mm thick an more than 15mm. // Non-slip and protection: The rubber pads on the metal clamp make it not easy to slide down and could protect your item from scratch. // 1/4" & 3/8" thread: The 1/4" & 3/8" on the back of the clamp. You can mount other accessories via the 1/4" or 3/8" thread. Such as SmallRig Monitor bracket 2070. //...

-Titulo Original : SMALLRIG Mini Anti-Off Quick Release NATO Rail (Thickness 6mm, Length 48mm) for NATO Handle, Camera Cage - 2172-Fabricante : SMALLRIG-Descripcion Original: 【THIN&LIGHTWEIGHT】Thickness of 6mm, Length of 48mm, weighs only 10g // 【COMPATIBILITY】Compatible with standard NATO clamp // 【ANTI-OFF DESIGN】Safety pins on each side preventing NATO clamp from sliding off // 【OTHER USE】It can be attached to any accessories with two 1/4-20 holes via two 1/4-20 screws (included) to provide a mount for QR handle, EVF mount, NATO clamp, and camera plate, etc. // 【RECOMMENDATION】It works with items with NATO clamp, such as SmallRig monitor mount with nato clamp 2100, Magic Arm 2071/2072/2133, nato clamp 1973, for quick attachment and release. // 1.The thinnest (6mm) and most low-profile NATO rail in the market; 2.Compatible with accessories with 1/4’’-20 threaded holes; 3.Compatible with SmallRig NATO clamps for quick release; 4.Safety pins on both ends to prevent sliding off. Universal 1 x Mini NATO Rail 2 x 1/4’’-20 Screw 1 x Hex Spanner 48 X 21 X 6mm 10g Aluminum Allo...

-Titulo Original : SMALLRIG Standard Rosette Bolt-On Mount (M6 Thread, 31.8 Diameter) for Camera Cage and Accessories - 1939-Fabricante : SMALLRIG-Descripcion Original: SMALLRIG Standard Rosette Bolt-On Mount (M6 Thread) 1939 is a multi-functional Rosette (M6, 31.8mm diameter) mount // There are three 1/4-20" and four M2 threaded holes on this rosette mount // It can be attached to a cage, rosette handle and other accessories // The stainless steel and aluminum alloy material make the rosette mount more sturdy and lightweight // The middle screw hole is M6, which just fit the ARRI Rosette with M6 screw. Such as the wooden handle 1891 and 1941. // : 1. standard rosette (M6, 31.8mm diameter) 2. Rosette Locks firmly 3. Integrated threads 4. CNC machined, durable and light : Camera Accessories with standard rosette : 1 x Standard Rosette Bolt-On Mount 2 x 1/4''-20 Screw 1 x Hex Spanner : 31.8x31.8x13mm : 40g : 130x108x16mm : 45g : Aluminum Allo...

-Titulo Original : SMALLRIG Super Clamp with 1/4’’ Thread Holes, 3/8’’ Locating Pin for ARRI Standard, T-Shaped Wingnut and Rubber Pads - 2220-Fabricante : SMALLRIG-Descripcion Original: 【VERSATILITY】The super clamp is designed to mount onto anything like cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps. It's up to your imagination & inventive ideas // 【T-SHAPED WINGNUT】The new design knob is designed to help you tighten the clamp comfortably and conveniently // 【FOR MORE ACCESSORIES】Made of aluminum alloy and stainless steel, sturdy and durable. The clamp features 1/4’’ threaded holes and 3/8’’ locating pin for ARRI standard, which allow you to attach more accessories // 【BETTER PROTECETION】The updated rubber pads on the clamp parts prevent your application from slipping and scratching // 【COMPATIBILITY】The jaw can be clamped on 10-50mm rods in diameter, fits your multiple needs // 1.Universal and ideal for use in many applications 2.Durable, robust and secure 3.Perfectly suitable for video-shooting via two types of mounting points 4.T-handle fits fingers well enhancing comfort Rods with a diameter of 10-55mm 1 X Super clamp 78X52X20 mm 99g Aluminum alloy + Stainless stee...

-Titulo Original : SMALLRIG NATO Clamp - Quick Release Clamp with 1/4 3/8 M2.5 Thread for Cold Shoe Monitor Support Ball Head - 1973-Fabricante : SMALLRIG-Descripcion Original: SmallRig Quick Release Clamp 1973 is a NATO standard clamp designed to attach a variety of accessories, such as cold shoe, articulating arm, monitor support ball head and so on. // The quick release clamp portion of the NATO Lock Kit is based on NATO standard. // Compatible with Safety Rails and Slide Rail Clamp/NATO Clamp. // Comes with 1/4-20, 3/8-16, M2.5 thread on the nato clamp for attachment. // Product Dimensions: 32x14x20mm; Material: Aluminum Alloy // - Use with safety NATO rails - 1/4-20 and 3/8-16 mounting holes - HQ CNC machining and finish, lightweight. Safety NATO rails 1x NATO Clamp 32x14x20mm (1.26 x 0.55 x 0.79 inch) 58g (0.13 lbs) 120x100x16mm (4.73 x 4 x 0.63 inch ) 63g (0.14 lbs) Aluminum Allo...

-Titulo Original : SMALLRIG Multi-Purpose Switching Plate for Rail Block, Dovetail Camera Cheese Plate - 1681-Fabricante : SMALLRIG-Descripcion Original: This is an upgraded version of cheese plate 1092 (B00CDFQMLQ). // This cheese plate is supplied with arrays of mouting holes and grooves, so that you can attach kinds of accessories to it, such as railblocks, short rods, dovetails, cages etc. // More Types Please Search: SmallRig 1705,1706,1707. Amazing Combinations! //...

-Titulo Original : SMALLRIG 15mm Carbon Fiber Rod for Camera Shoulder Rig, 20cm 8 inch, Pack of 2-870-Fabricante : SMALLRIG-Descripcion Original: HIGH PERFORMANCE: The 15mm carbon fiber rod has good heat resistance, corrosion, rubbing performance // SMOOTH COATING: The smooth surface makes your installation more conveniently and comfortably // LIGHTWEIGHT: Weighs only 40g, lighter than traditional stainless-steel rods // LENGTH: 8 inches (20cm) long. If you need a longer rod, SmallRig rods 851(30cm, 12 inches) will be recommended // Made of carbon fiber, sturdy and durable. Please note that the carbon fiber rods do not feature female thread // Size: It is the new version of carbon fiber rod with a more smooth surface. It fits 15mm rod clamp but its surface is not shinnying anymore because we have redesigned it based on some customers' advice. The carbon fiber rods are much lighter than stainless steel rods, but carbon fiber rods are incredibly rigid and durable. The product includes 2pcs of rods. 40g(2pcs) Carbon Fibe...

-Titulo Original : SMALLRIG 15mm Carbon Fiber Rod 30cm 12 inch, Pack of 2-851-Fabricante : SMALLRIG-Descripcion Original: It is the new version of carbon fiber rod with the more smooth surface. // It fits 15mm rod clamp but its surface is not shiny anymore because we have redesigned it based on some customers' advice. // The carbon fiber rods are much lighter than stainless steel rods, but carbon fiber rods are incredibly rigid and durable. // Standard 15mm, can be used with 15mm rod clamp, follow focus, matte box, and so on. // Weight: only 37g; Package includes: 2 x carbon fiber rod. Please note that the carbon fiber rods do not feature female thread // Size: 74g (2pcs)Carbon Fibe...

-Titulo Original : SMALLRIG Camera Mounting Plate Tripod Mounting Plate with 15mm Rod Clamp Railblock for Rod Support/DSLR Rig Cage - 1775-Fabricante : SMALLRIG-Descripcion Original: SMALLRIG Mounting Plate with 15mm Rod Clamps 1775 is an aluminum plate with 15mm rod clamps for camera mounting, which supplies protective and stable mounting options to camera devices. // The camera could be slided and adjusted along the middle groove, and accessories can be mounted by the 1/4" and 3/8'' threaded holes. // There are screws and rubber cusions for camera attachment and protection. It could be used to directly mount camera, cage and tripod etc. // On bottom, there are 15mm LWS rod clamps for matte box, lens support and follow focus. It enables use of standard accessories for the 15mm rod system. // The wingnuts are help to mount or release the rods conveniently. // : 1x Cheese Plate 2x Rod Clamps 840 1x 1/4'' Screw 1x 3/8'' Screw 1x Hex Spanner : 285g : 90x110x32m...

-Titulo Original : SMALLRIG Super Lightweight 15mm Railblock with 1/4-20 Thread for RED and Other 15mm DSLR Camera Rig - 942-Fabricante : SMALLRIG-Descripcion Original: 15mm Dual Rod Clamp for 15mm Rail Support System // Features 1/4’’-20 threaded holes for attaching more accessories // Compatible with RED camera, Red Rig and other 15mm DSLR Camera Rig, standard 15mm rod // Spring Ratchet Wingnut is to tighten the rod and re-position in narrow spots where you’re not able to fully turn them // Made of aluminum alloy, sturdy and durable // Size: 1. It comes with two rod clamps for 15mm rods, which could be tightened via 2 rotatable wingnuts. 2. The adjustment of one wingnut will not affect the operation of the other wingnut. 3. It is equipped with an abundance of 1/4 threaded holes for DIY operations. 15mm Rod 1 x 15mm-Railblock-3 2 x 1/4'' Screw(short) 2 x 1/4'' Screw(long) 1 x Hex Spanner 110x10x42 mm 40g 160x140x40mm Aluminum Allo...

-Titulo Original : SMALLRIG 90-Degree 15mm Rod Clamp for DIY Camera Camcorder Video Rigs Shoulder Mounting Accessory - 2069-Fabricante : SMALLRIG-Descripcion Original: The 90 Degree 15mm Rod Clamp 2069 is specifically designed for 15mm rods. It could provide more DIY mounting possibilities based on your needs during shooting. // It could be locked tight via 2 wingnuts. It could attach 15mm rod and then 15mm Micro Rod(1.5'') with 1/4’’ Thread 1552 for monitor. // It features quick attachment and release during this process. It could attach 15mm rod of dual-rod system for run-and-gun operation. // It could be mounted on 15mm Rod with 1/4 Inch Screw Hole 1182 for magic arm whereby monitor could be attached. It could attach 15mm rod and then Microphone Shock for microphone. // Package Includes: 1 x 90 Degree 15mm Rod Clamp 2069. Material(s): Aluminum Alloy // 1. It is compatible with 15mm rods and could be locked tight via 2 wingnuts. 2. It could be widely used in many DIY operations. 15mm Rod 1 x 90 Degree 15mm Rod Clamp 2069 68.5x26.5x26.5mm 46g 85x75x24mm Aluminum Allo...

-Titulo Original : SMALLRIG Quick Release Plate Compatible with Arca Swiss Standard for Cameras and Cages - 2146-Fabricante : SMALLRIG-Descripcion Original: Universal quick release plate for Arca-Swiss standard // Attached to the bottom of the cage or camera via 1/4’’-20 and 3/8’’-16 screw // Fits perfectly with SmallRig 15mm Rail Support System Baseplate 1687 // Compatible with SmallRig Cage for Sony A7RIII/A7M3/A7III 2087, SmallRig Cage for Sony a7II/a7RII/a7SII 1982, SmallRig Cage for Sony A6000/A6300/A6500/Nex-7 1661,etc. // Compatible with SmallRig Baseplate 2143, 2145, 2144 and 2092, etc. // SMALLRIG Baseplate 2143 SMALLRIG Baseplate 2145 SMALLRIG Baseplate 2144 SMALLRIG Baseplate 2092 SMALLRIG Cage for Sony A7RIII/A7M3/A7III 2087 SMALLRIG Cage for Sony a7II/a7RII/a7SII 1982 SMALLRIG Cage for Sony A6000/A6300/A6500/Nex-7 1661 SMALLRIG 15mm Rail Support System Baseplate 1687 2146 x 1 1/4’’-20 Screw x 1 3/8’’-16 Screw x 1 68*40*17.5mm 48g 61g Aluminum Allo...

-Titulo Original : SMALLRIG 15mm Carbon Fiber Rod 4 Long for 15mm Rod Support System (Non-Thread), Pack of 2-1871-Fabricante : SMALLRIG-Descripcion Original: SMALLRIG 15mm Carbon Fiber Rod (4" , pair) 1871 is a pair of 4 inch long non-threaded rods featuring a carbon fiber pattern on the outer surface, which is highly rigid, lightweight and corrosion resistant // This pair of rods are 100mm long machined from hollow carbon fiber tubes // It is precision crafted for 15mm support systems, you can attach a wide variety of available accessories, such as follow focus, matteboxes and much more // If you need much longer carbon fiber rods, please click 15mm Carbon Fiber Rod - 20cm 8inch (2pcs) 870, 15mm Carbon Fiber Rod - 30cm 12inch (2pcs) 851 // Made of carbon fiber, sturdy and durable. Please note that the carbon fiber rods do not feature female thread // Size: : 1.Lightweight 2.Highly Rigid 3.Corrosion Resistant : 15mm support system : 2 x Carbon fiber rod : 100x15x15mm : 24g :12x35x25mm : 34g : Carbon Fibe...

-Titulo Original : SmallRig M12 Rod End Protective Cap Stopper Screw for 15mm Rod Support Dslr Rig Rail Clamp (4pcs Pack)-Fabricante : SmallRig-Descripcion Original: The rod cap 1617 is used for M12 threaded rod on the end, helping protect the equipment from accidentally sliding off from your rods. // M12(12mm) threaded: the end cap features a M12 thread screw on the end, which is only compatible with M12 threaded rod on the end. // Rubber Ring: the rubber ring for each rod cap to ensure the connecting of rod and rod cap more firmly. // The rod cap is made of high-quality aluminium alloy and rubber, light but stable when using. // Package included: 4 x rod cap(M12); Net Weight: 40g // The M12 Rod End / Protective Cap / Stopper Screw used to protect your rod thread from damage, Protect your rod clamp / rail block from slipping out.Made of aluminum with anodized coating and sand blasting finish. 18mm 17mm 12mm 4 x M12 Rod End / Protective Ca...

-Titulo Original : SMALLRIG Single 15mm Rail Clamp Mount Rod Clamp with Long Hole on Plate/Cage/Handle for Rod Extension - 1549-Fabricante : SMALLRIG-Descripcion Original: SMALLRIG Single 15mm Rail Clamp 1549 // This single rail clamp can be mounted on a plate/cage/handle for rod extension. // Connect your dslr rigs by utilizing the long hole and screws.(Screws are included.) // This single rail clamp can be mounted on a plate/cage/handle for rod extension. 1 x single 15mm rail clamp mount 2 x connection screws 1 x hex spanne...

-Titulo Original : SMALLRIG 5.8 Inches Adjustable Friction Power Articulating Magic Arm with Both 1/4 Thread Screw for LCD Monitor/LED Lights - 2065-Fabricante : SMALLRIG-Descripcion Original: Magic Arm: The precise and durable designed Articulating Magic Friction Arm provides great versatility for the positioning of access. // Easy Position: Double 360 degrees Ball Head Articulating design adjusts any angles based on your needs. // Wide compatibility: With 1/4" thread on both ends to install any on-camera flash lights, microphone,LCD monitor,DV Monitor, microphone on one end and other accesorries like cage, NATO Rail 1973, 15mm Rod 1182 and Quick Release Rod Clamp 1976 etc. // Rubber Thread: Mounted with 1/4" screw is a rubber cushion which could prevent the scratches of monitor and help to lock the monitor tighter. // Customer Service: Backed with 100% satisfaction guaranteed for quality problem; 24hx7 Customer Service Support. // Size: 1.The precise and durable designed Articulating Magic Friction Arm provides great versatility for the positioning of access. 2.Double 360 degree Ball Head Articulating design adjusts any angles based on your needs. 3. With 1/4 thread on both ends to install any on-camera flash lights, microphone,LCD monitor,DV Monitor, microphone on one end and other accesorries like cage, NATO Rail 1973, 15mm Rod 1182 and Quick Release Rod Clamp 1976 etc. 4. Mounted with 1/4 screw is a rubber cushion which could prevent the scratches of monitor and help to lock the monitor tighter. Universal 1 x 5.8 inches Articulating Arm 2065: 86x60x25 mm : 168g : 155x100x40mm : Aluminum Alloy/Stainless Steel/ Free-cutting Stee...

-Titulo Original : SMALLRIG DSLR Rig System 15mm Rod Clamp with 1/4 Thread Hole to Attach Camera Microphones/Sound Recorders/Lighting Equipment - 860-Fabricante : SMALLRIG-Descripcion Original: Since it is a standard 15mm rod clamp for the camera rig, it could be used on the 15mm rod system. It is possible to connect shooting accessories such as a monitor, microphone and EVF to a 15 mm rod via the 15 mm single rod clamp-860. // How to use: It is possible to connect the monitor or EVF via the 1/4" screw. Also, you can attach a 15 mm rod directly to a 15 mm rod clamp. // When the knob is blocked by other accessories can not tighten the pipe clamp, you can pull out the knob a bit, adjust the direction and then continue to tighten. // The white rubber pad on the screw is could protect your monitor or other equipment from scratch. // Package Contents: 1 x 15 mm Rod clamp (Please note: Please check size and package contents before purchasing!) // The Single Railblock Rod Clamp can be mounted on any standard 15mm rods on DSLR Rig. Comes with 1/4 thread hole: thread diameter is international standard 1/4. Material: Aluminum Allo...

-Titulo Original : SMALLRIG 15mm Rod Clamp with Rosette for ARRI Standard for Camcorder Support System – 1686-Fabricante : SMALLRIG-Descripcion Original: Compatible with 15mm standard rods, fits perfectly with SmallRig Dogbone Arm 1684 // Rosette for Arri standard with M6 threaded holes, work with M6 screw (31.8mm diameter) // Enable to attach extension arm or EVF support, etc // Lock the rod clamp via the wingnut, quickly and conveniently // CNC machined. Lightweight, only weighs 0.12lb //...

-Titulo Original : SMALLRIG Cold Shoe Mount Adapter with 1/4’’ Thread Hole for Camera and Camcorder Rigs – 1241-Fabricante : SMALLRIG-Descripcion Original: Standard shoe mount Compatible: allow you to attache Micorphone, Flash, LED, Handle, etc. Fit for all the accessories with 1/4"-20 threaded holes. // This 3rd version: 1. One short screw meets your need and help you to protect your equipement. 2. There comes with two secure bending bevels on the one end to prevent accessory accidental removal instead of a small screw on the cold shoe. // Secure tightly via the two M2.5 screws, and a 1/4" thread hole for you to attache to camera cage, plate, handles, or other accessories. // We specially offer two white arrows on the surface to show the mounting ways for your convenience. // Package included: 1 x 1/4"-20 screw; 2 x M2.5 Screws; 2 x Hex spanner Diamatre : 25mm x 25mm; Material: Aluminum Alloy //...

-Titulo Original : Standard 15mm Micro Rod 1.5 Inches Long with 1/4 Male Female Thread for Clamp Mount - 915-Fabricante : SMALLRIG-Descripcion Original: This 1.5" rod can serve as 15 mm quick release mount for adapting anything that requires a male or female 1/4" 20 connection. It is often used in conjunction with a clamp Mount (not included) or CheesePlate (not included). // 1/4"-20 male mount with locking wheel can tightly secure items such as external monitors, microphones, lighting and many other accessories // A 15 mm micro rod with 1.5" total length (38 mm) --- comes with 1/4"-20 male thread on top ,1/4"-20 female thread at bottom. // Stainless Steel Screw. // FEATURES:15mm micro rod,Made of Aluminum Alloy,1.5 long (3.8cm), standard 15mm rod, comes with standard 1/4-20 thread.With 1/4-20 male thread on top ,1/4-20 female thread at bottom.Made of Stainless Steel,Dimension: 16 mm x 19.7 mm(diameter x height)...

-Titulo Original : SMALLRIG Universal Height-Adjustable Baseplate with 15mm Rail Support System for Mirrorless and DSLR Camera Rig - 2272-Fabricante : SMALLRIG-Descripcion Original: 【UNIVERSALITY】A dedicated baseplate designed for mirrorless and DSLR cameras // 【HEIGHT-ADJUST】It is height-adjustable via the side wingnut to ensure different cameras sit on the baseplate complying with the LWS standard, allow you to attach Follow Focus, Matte Box, etc // 【FOR ARCA STANDARD】Features a baseplate and quick release plate for Arca standard on the top. Attach the QR plate to the camera or camera cage, and then drop it into the receiver, locked via the side knob screw // 【15mm RAIL RISER】Comes with a 15mm rail support system for accessories attachment. You can attach SMALLRIG 15mm Rod 1053 for a Lens Support 2152 or Shoulder Pad 2077 // 【MOUTING HOLES】There are multiple 1/4’’ and 3/8’’ threaded holes on the bottom of the baseplate for attaching different tripod plate // For Sony A6000/A6300/A6500/A7/A7II/A7SII/A7RII/A9/A7III/A7RIII For Panasonic GH3/GH4/GH5/G80/GX85/G7/G85/G9 For Canon 5D Mark IV/M50/M5/M3/M6/EOS R For Fujifilm X-H1/X-T1/X-T2/X-T20 For Olympus E-M1 Mark II For Nikon Z6/Z7 1 x Baseplate 2272 1 x Hex Spanner 108 x 68 x 54 mm 126 x 110 x 88 mm 267g 337g Aluminum Allo...

-Titulo Original : SMALLRIG Hex Screw 1/4 Screws(12pcs/Pack) - 1713-Fabricante : SMALLRIG-Descripcion Original: This screw pack includes 12pcs of standard screws. // 4pcs 1/4'' screws (1/4" thread length) used on most of SmallRig camera cages, such as VersaFrame Cage 1584 // 4pcs 1/4" screws (3/8'' thread length) used on easy plate 1598 // Material: stainless steel. // Includes: 4x 1/4''-20 screw(1/4'' thread length) 4x 1/4''-20 screw(3/8'' thread length) 1x Hex spanner // Size: SmallRig 171...

-Titulo Original : SMALLRIG Cage for Canon EOS M50 and M5 with Integrated Grip and Quick Release NATO Rail 2168-Fabricante : SMALLRIG-Descripcion Original: CUSTOMIZATION: With a comfortable integrated grip moulded into the cage, it is the FIRST cage designed for EOS M50 and M5 in the market. // All BUTTONS UNOBSTRUCTED: Form-fitting design with super CNC cutting technology will not block camera hot shoe, camera control buttons, hdmi/sdi slot, sd and battery compartment. // ERGONOMIC AND DURABLE: The super compact body features beautiful and practical ergonomics design. It is made out of a super tough and lightweight aluminum alloy，anti-oxidation, scratch-resistant. // VERSATILE INTERFACE: Multiple mounting interfaces (cold shoe, NATO rail, 1/4 and 3/8 threaded holes, locating holes for Arri standard) for accessories. // QUICK SWITCH: A built-in QR plate for Arca Swiss on the bottom, which means you can achieve quick attach and release, lets you go from tripod to handheld shooting in seconds. 1/4 and 3/8 threaded holes on the bottom for different tripods or monopods. //...

-Titulo Original : SMALLRIG Portable Folding Multi-Tool Set with Screwdrivers and Hex Key 2.5, 3, 4, 3/16mm, Multi-Thread Holes – 2213-Fabricante : SMALLRIG-Descripcion Original: Specially designed for video photographers, also can be used as a repair tool, etc // 7 in 1 multi-function toolkit: 4 Allen Wrenches 2.5, 3, 4, 3/16, 1 slotted screwdriver, 1 Phillips screwdriver, and 1 Torx T25 driver // Additional M3, M4, M5, 1/4’’, 3/8’’threaded holes on the side for the spare screw (please note that screws are not included in this kit) // Pocket-sized and compact design, easy for storage // Made of stainless steel and aluminum alloy, sturdy and durable // Size: 1. 7 functional tools included: 4 Allen Wrenches 2.5, 3, 4, 3/16, 1 slotted screwdriver, 1 Phillips screwdriver and 1 Torx T25 driver; 2. All tools folded in one pocket-sized compact set; 3. Additional threaded holes M3, M4, M5, 3/8 on the side for spare screws. Universal 1 x Folding Tool Set 82 x 24 x 12mm 120 x 35 x 25mm 79g 90g Stainless Steel + Aluminum Allo...