Arriba

Inicio » SainSmart

SainSmart

Mostrar: 
Mostrar del 1 al 17 (de 17 productos)
Páginas de Resultados:  1 
  • Kit de Grabado Láser Creality 1.6W para Impresoras 3D Ender
    Precio:  $418,519.00
    Agregar al Carrito   Vista

    Kit de Grabado Láser Creality 1.6W para Impresoras 3D Ender

    -Titulo Original : Creality 3D Printer Laser Engraver Module Ender 3 S1 Laser Engraving Attachment 1.6W 24V 450nm Blue-Violet Light, Upgrade Safety Cover And Fixed Focus, For Ender 3 S1, Ender 3 S1 Pro & Ender 3 S1 Plus-Fabricante : SainSmart-Descripcion Original: Presentamos nuestro módulo de diodo láser Premium, diseñado para ofrecer confiabilidad, alta estabilidad y eficiencia excepcionales. Gracias a su calidad superior, este módulo genera un haz de láser notablemente preciso. Con un enfoque fijo a diferencia de los módulos de láser de enfoque ajustable, el punto de luz de nuestra unidad es mucho más pequeño. Además, presenta una unidad de enfoque única que permite fijar el enfoque de manera rápida y precisa, consiguiendo el mejor efecto de grabado. Para garantizar un uso prolongado, nuestro módulo láser cuenta con un sistema de disipación de calor rápido y eficiente. Incluye un disipador de calor de aluminio de gran tamaño, un ventilador de refrigeración DC y un orificio adicional para mejorar el flujo de aire. En términos de seguridad, este módulo ha sido mejorado con una nueva cubierta que cumple con los requisitos de seguridad de nivel 4 de la FDA, evitando daños oculares y cutáneos por exposición al láser. Este módulo láser es compatible con Ender 3 S1, Ender 3 S1 Pro y Ender 3 S1 Plus y se puede usar para grabar madera, cuero, papel y bambú. No dudes en comprarlo si estás buscando realizar tus proyectos de grabado con la máxima calidad y seguridad...
  • Herramientas para tallar la Madera mas cuchillos de acero.
    Precio:  $175,609.00
    Agregar al Carrito   Vista

    Herramientas para tallar la Madera mas cuchillos de acero.

    -Titulo Original : SainSmart Wood Carving Tools, 20 In 1 Wood Knife Deluxe Set Includes Hook Carving Knife, Whittling Knife, Detail Knife, And SK2 Carbon Steel Carving Knives, For DIY Enthusiasts, Carving Basswood-Fabricante : SainSmart-Descripcion Original: - [Contenido del kit] Nuestro juego básico para tallar madera de 20 piezas incluye 1 cuchillo para tallar con gancho, 1 y n.º 215; cuchillo para tallar, 1 y #215; cuchillo de talla de madera de detalle, 12 y #215; Herramienta de talla de madera de acero al carbono SK2, 1 y #215; correa de cuero pulido, 1 y #215; compuesto para pulir, 2 y #215; guantes resistentes a los cortes, 1 bolsa enrollable. - [Calidad Premium] Fabricado en acero al carbono endurecido de alta calidad. Duradero y resistente a la corrosión, ideal para una variedad de proyectos. - [Excelente comodidad] Los mangos de madera de nogal barnizada tienen un cómodo agarre ergonómico y un acabado suave para reducir la fatiga de la mano. - [Curado para principiantes o para completar su caja de herramientas] Los cuchillos para tallar vienen con una práctica bolsa enrollable. Los guantes resistentes a los cortes mantienen sus manos seguras y lo ayudan a concentrarse en tallar en lugar de cortarse y rasparse. La cera de aceite y el pulidor de correas de cuero ayudan a mantener sus cuchillas para una vida útil prolongada y un tallado uniforme y uniforme. - [Regalo navideño multifuncional y perfecto] Este juego de cuchillos para tallar madera es adecuado para tallar, cortar y tallar madera, también para proyectos de esteatita, manualidades o esculturas de arcilla. Es el regalo perfecto para principiantes y entusiastas por igual. ¡Déjalos experimentar la diversión de tallar madera...
  • Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [7VV2NH9P]
    Precio:  $109,529.00
    Agregar al Carrito   Vista

    Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [7VV2NH9P]

    -Titulo Original : SAINSMART 1.75mm 250g Flexible TPU 3D Printing Filament, Dimensional Accuracy +/- 0.05 mm (Mango Mojito)-Fabricante : SAINSMART-Descripcion Original: Approximately 250 grams, feet of filament on a spool with a case so it's not flopping all over the place. Splash Spools store easily in a desk drawer, stacked space or even hang on a wall. Be sure you are ordering the correct diameter for your printer. This product is only available in 1.75mm. // Specially formulated plastic with increased amount of flexibility, with rigid structure. Recommended for printing objects, which will be impacted more than normal ones. // SAINSMART filament is 100% TPU. TPU is essentially polyurethane, it belongs to the TPE class of thermoplastics. Recommended for printing objects, which will be impacted more than normal ones. // Flexible Filament does not feed well on all 3D printers. Please check your printer specifications before ordering. Only available in 1.75mm diameter. // It's better to work on direct drive extruders. Please print slowly and read the tips if you are bowden. // Color: SainSmart TPU filament is featured by its high strength and flexibility, like a hybrid of plastic and rubber. 95A TPU has high abrasion resistance and low compression compared to rubber parts, especially at higher infill. In comparison with most common filaments like PLA and ABS, TPU must be run much slower. - Material: Rep-Flex TPU - Vacuumed Sealed with desiccant - Shore Hardness: 95A - Weight: 250g Spool - Diameter: 1.75mm (+/- 0.05mm) - Recommended extruder temperature:195 - 230°C - Recommended platform temperature: 40 - 60°C Recommended for printers with direct drive extruder, 0.4~0.8mm Nozzles. With bowden extruder you might pay more attention to these tips: - Print slow 15-30 mm/s Printing speed - First layer settings. (Height 100% Width 150% speed 50% e.g.) - Retraction disabled. This would reduce messy, stringing or oozing printing result. - Increase Multiplier(Optional). set to 1.1 would help the filament bond well. - Cooling fan on after first layer. If you are having problems printing with soft filaments, firstly, and most importantly, slow the print down, run at 20mm/s will work perfectly. It is important when loading the filament to allow it to only just start extruding. Once you see the filament coming out the nozzle hit stop. The load feature pushes filament through quicker than a normal print and this can cause it to get caught in the extruder gear. Also feed the filament direct to the extruder, not through the feeder tube. This reduces the drag on the filament which can cause the gear to slip on the filament. I 1x SainSmart TPU Flexible Filament 1.75mm 250g(vacuum sealed...
  • Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [7VRKCM76]
    Precio:  $109,529.00
    Agregar al Carrito   Vista

    Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [7VRKCM76]

    -Titulo Original : SAINSMART 1.75mm 250g Flexible TPU 3D Printing Filament, Dimensional Accuracy +/- 0.05 mm (Galaxy Blue)-Fabricante : SAINSMART-Descripcion Original: Approximately 250 grams, feet of filament on a spool with a case so it's not flopping all over the place. Splash Spools store easily in a desk drawer, stacked space or even hang on a wall. Be sure you are ordering the correct diameter for your printer. This product is only available in 1.75mm. // Specially formulated plastic with increased amount of flexibility, with rigid structure. Recommended for printing objects, which will be impacted more than normal ones. // SAINSMART filament is 100% TPU. TPU is essentially polyurethane, it belongs to the TPE class of thermoplastics. Recommended for printing objects, which will be impacted more than normal ones. // Flexible Filament does not feed well on all 3D printers. Please check your printer specifications before ordering. Only available in 1.75mm diameter. // It's better to work on direct drive extruders. Please print slowly and read the tips if you are bowden. // Color: SainSmart TPU filament is featured by its high strength and flexibility, like a hybrid of plastic and rubber. 95A TPU has high abrasion resistance and low compression compared to rubber parts, especially at higher infill. In comparison with most common filaments like PLA and ABS, TPU must be run much slower. - Material: Rep-Flex TPU - Vacuumed Sealed with desiccant - Shore Hardness: 95A - Weight: 250g Spool - Diameter: 1.75mm (+/- 0.05mm) - Recommended extruder temperature:195 - 230°C - Recommended platform temperature: 40 - 60°C Recommended for printers with direct drive extruder, 0.4~0.8mm Nozzles. With bowden extruder you might pay more attention to these tips: - Print slow 15-30 mm/s Printing speed - First layer settings. (Height 100% Width 150% speed 50% e.g.) - Retraction disabled. This would reduce messy, stringing or oozing printing result. - Increase Multiplier(Optional). set to 1.1 would help the filament bond well. - Cooling fan on after first layer. If you are having problems printing with soft filaments, firstly, and most importantly, slow the print down, run at 20mm/s will work perfectly. It is important when loading the filament to allow it to only just start extruding. Once you see the filament coming out the nozzle hit stop. The load feature pushes filament through quicker than a normal print and this can cause it to get caught in the extruder gear. Also feed the filament direct to the extruder, not through the feeder tube. This reduces the drag on the filament which can cause the gear to slip on the filament. 1x SainSmart TPU Flexible Filament 1.75mm 250g(vacuum sealed...
  • Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [78JMFH7S]
    Precio:  $109,529.00
    Agregar al Carrito   Vista

    Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [78JMFH7S]

    -Titulo Original : SAINSMART 1.75mm 250g Flexible TPU 3D Printing Filament, Dimensional Accuracy +/- 0.05 mm (Emerald)-Fabricante : SAINSMART-Descripcion Original: TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible. // Compatible with all FDM printers on the market which accept 1.75 mm filament. Including Prusa i3, Monoprice MakerSelect, X Creality, and other RepRap printers. // With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament’s tendency to not warp. // Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more! // It's better to work on direct drive extruders. Please print slowly and read the tips if you are bowden. // Color: SainSmart TPU filament is renowned for its high strength and flexibility. With the design freedom of 3D printing, SainSmart filament is the key to bringing your project, whether it be a weekend hobby orprototyping for a Fortune 500 company, from the sketchpad to reality. Each spool of SainSmart TPU filament comes with 0.25 kg of material. This filament is drawn out to a diameter of 1.75 mm with a dimensional accuracy of +/- 0.05 mm, making it the perfect choice for most printers on the market. Diameter: 1.75 mm Material: Flexible TPU Net Weight: 0.25 kg Shore Hardness: 95 A Print Nozzle: 0.4 – 0.8 mm Extruder Temperature: 195 – 230°C Print Bed Temperature: 40 – 60°C Cooling Fan: On Print Slower: 15 – 30 m/s First Layer Settings: 100% Height. 150% Width, 50% Speed Disable Retraction: Should reduce oozing and stringing Cooling Fan: On after first layer Increase Multiplier: 1.1, should increase bonding Do not over extrude filament when loading. As soon as the filament start protruding from the nozzle, stop. Loading any faster will cause the filament to get caught in extruder gear. Feed the filament directly to the extruder, and not through the feeder tube. This reduces back tension in the filament as well as drag, ensuring proper feeding. 1x SainSmart TPU Flexible Filament 1.75mm 0.25kg vacuum sealed w/ desiccan...
  • Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [78J9SXBJ]
    Precio:  $109,529.00
    Agregar al Carrito   Vista

    Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [78J9SXBJ]

    -Titulo Original : SAINSMART 1.75mm 250g Flexible TPU 3D Printing Filament, Dimensional Accuracy +/- 0.05 mm (Pink)-Fabricante : SAINSMART-Descripcion Original: TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible. // Compatible with all FDM printers on the market which accept 1.75 mm filament. Including Prusa i3, Monoprice MakerSelect, X Creality, and other RepRap printers. // With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament’s tendency to not warp. // Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more! // It's better to work on direct drive extruders. Please print slowly and read the tips if you are bowden. // Color: SainSmart TPU filament is renowned for its high strength and flexibility. With the design freedom of 3D printing, SainSmart filament is the key to bringing your project, whether it be a weekend hobby orprototyping for a Fortune 500 company, from the sketchpad to reality. Each spool of SainSmart TPU filament comes with 0.25 kg of material. This filament is drawn out to a diameter of 1.75 mm with a dimensional accuracy of +/- 0.05 mm, making it the perfect choice for most printers on the market. Diameter: 1.75 mm Material: Flexible TPU Net Weight: 0.25 kg Shore Hardness: 95 A Print Nozzle: 0.4 – 0.8 mm Extruder Temperature: 195 – 230°C Print Bed Temperature: 40 – 60°C Cooling Fan: On Print Slower: 15 – 30 m/s First Layer Settings: 100% Height. 150% Width, 50% Speed Disable Retraction: Should reduce oozing and stringing Cooling Fan: On after first layer Increase Multiplier: 1.1, should increase bonding Do not over extrude filament when loading. As soon as the filament start protruding from the nozzle, stop. Loading any faster will cause the filament to get caught in extruder gear. Feed the filament directly to the extruder, and not through the feeder tube. This reduces back tension in the filament as well as drag, ensuring proper feeding. 1x SainSmart TPU Flexible Filament 1.75mm 0.25kg vacuum sealed w/ desiccan...
  • Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [72LYRQ84]
    Precio:  $109,529.00
    Expira: 17/06/2021
    Agregar al Carrito   Vista

    Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [72LYRQ84]

    -Titulo Original : SAINSMART 1.75mm 250g Flexible TPU 3D Printing Filament, Dimensional Accuracy +/- 0.05 mm (Green)-Fabricante : SAINSMART-Descripcion Original: Approximately 250 grams, feet of filament on a spool with a case so it's not flopping all over the place. Splash Spools store easily in a desk drawer, stacked space or even hang on a wall. Be sure you are ordering the correct diameter for your printer. This product is only available in 1.75mm. // Specially formulated plastic with increased amount of flexibility, with rigid structure. Recommended for printing objects, which will be impacted more than normal ones. // SAINSMART filament is 100% TPU. TPU is essentially polyurethane, it belongs to the TPE class of thermoplastics. Recommended for printing objects, which will be impacted more than normal ones. // Flexible Filament does not feed well on all 3D printers. Please check your printer specifications before ordering. Only available in 1.75mm diameter. // It's better to work on direct drive extruders. Please print slowly and read the tips if you are bowden. // Color: SainSmart TPU filament is featured by its high strength and flexibility, like a hybrid of plastic and rubber. 95A TPU has high abrasion resistance and low compression compared to rubber parts, especially at higher infill. In comparison with most common filaments like PLA and ABS, TPU must be run much slower. - Material: Rep-Flex TPU - Vacuumed Sealed with desiccant - Shore Hardness: 95A - Weight: 250g Spool - Diameter: 1.75mm (+/- 0.05mm) - Recommended extruder temperature:195 - 230°C - Recommended platform temperature: 40 - 60°C Recommended for printers with direct drive extruder, 0.4~0.8mm Nozzles. With bowden extruder you might pay more attention to these tips: - Print slow 15-30 mm/s Printing speed - First layer settings. (Height 100% Width 150% speed 50% e.g.) - Retraction disabled. This would reduce messy, stringing or oozing printing result. - Increase Multiplier(Optional). set to 1.1 would help the filament bond well. - Cooling fan on after first layer. If you are having problems printing with soft filaments, firstly, and most importantly, slow the print down, run at 20mm/s will work perfectly. It is important when loading the filament to allow it to only just start extruding. Once you see the filament coming out the nozzle hit stop. The load feature pushes filament through quicker than a normal print and this can cause it to get caught in the extruder gear. Also feed the filament direct to the extruder, not through the feeder tube. This reduces the drag on the filament which can cause the gear to slip on the filament. I 1x SainSmart TPU Flexible Filament 1.75mm 250g(vacuum sealed...
  • Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [72JCXS4G]
    Precio:  $109,529.00
    Agregar al Carrito   Vista

    Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [72JCXS4G]

    -Titulo Original : SAINSMART 1.75mm 250g Flexible TPU 3D Printing Filament, Dimensional Accuracy +/- 0.05 mm (Black)-Fabricante : SAINSMART-Descripcion Original: Approximately 250 grams, feet of filament on a spool with a case so it's not flopping all over the place. Splash Spools store easily in a desk drawer, stacked space or even hang on a wall. Be sure you are ordering the correct diameter for your printer. This product is only available in 1.75mm. // Specially formulated plastic with increased amount of flexibility, with rigid structure. Recommended for printing objects, which will be impacted more than normal ones. // SAINSMART filament is 100% TPU. TPU is essentially polyurethane, it belongs to the TPE class of thermoplastics. Recommended for printing objects, which will be impacted more than normal ones. // Flexible Filament does not feed well on all 3D printers. Please check your printer specifications before ordering. Only available in 1.75mm diameter. // It's better to work on direct drive extruders. Please print slowly and read the tips if you are bowden. // Color: SainSmart TPU filament is featured by its high strength and flexibility, like a hybrid of plastic and rubber. 95A TPU has high abrasion resistance and low compression compared to rubber parts, especially at higher infill. In comparison with most common filaments like PLA and ABS, TPU must be run much slower. - Material: Rep-Flex TPU - Vacuumed Sealed with desiccant - Shore Hardness: 95A - Weight: 250g Spool - Diameter: 1.75mm (+/- 0.05mm) - Recommended extruder temperature:195 - 230°C - Recommended platform temperature: 40 - 60°C Recommended for printers with direct drive extruder, 0.4~0.8mm Nozzles. With bowden extruder you might pay more attention to these tips: - Print slow 15-30 mm/s Printing speed - First layer settings. (Height 100% Width 150% speed 50% e.g.) - Retraction disabled. This would reduce messy, stringing or oozing printing result. - Increase Multiplier(Optional). set to 1.1 would help the filament bond well. - Cooling fan on after first layer. If you are having problems printing with soft filaments, firstly, and most importantly, slow the print down, run at 20mm/s will work perfectly. It is important when loading the filament to allow it to only just start extruding. Once you see the filament coming out the nozzle hit stop. The load feature pushes filament through quicker than a normal print and this can cause it to get caught in the extruder gear. Also feed the filament direct to the extruder, not through the feeder tube. This reduces the drag on the filament which can cause the gear to slip on the filament. I 1x SainSmart TPU Flexible Filament 1.75mm 250g(vacuum sealed...
  • Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [728LNLX7]
    Precio:  $109,529.00
    Agregar al Carrito   Vista

    Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [728LNLX7]

    -Titulo Original : SAINSMART 1.75mm 250g Flexible TPU 3D Printing Filament, Dimensional Accuracy +/- 0.05 mm (Red)-Fabricante : SAINSMART-Descripcion Original: Approximately 250 grams, feet of filament on a spool with a case so it's not flopping all over the place. Splash Spools store easily in a desk drawer, stacked space or even hang on a wall. Be sure you are ordering the correct diameter for your printer. This product is only available in 1.75mm. // Specially formulated plastic with increased amount of flexibility, with rigid structure. Recommended for printing objects, which will be impacted more than normal ones. // SAINSMART filament is 100% TPU. TPU is essentially polyurethane, it belongs to the TPE class of thermoplastics. Recommended for printing objects, which will be impacted more than normal ones. // Flexible Filament does not feed well on all 3D printers. Please check your printer specifications before ordering. Only available in 1.75mm diameter. // It's better to work on direct drive extruders. Please print slowly and read the tips if you are bowden. // Color: SainSmart TPU filament is featured by its high strength and flexibility, like a hybrid of plastic and rubber. 95A TPU has high abrasion resistance and low compression compared to rubber parts, especially at higher infill. In comparison with most common filaments like PLA and ABS, TPU must be run much slower. - Material: Rep-Flex TPU - Vacuumed Sealed with desiccant - Shore Hardness: 95A - Weight: 250g Spool - Diameter: 1.75mm (+/- 0.05mm) - Recommended extruder temperature:195 - 230°C - Recommended platform temperature: 40 - 60°C Recommended for printers with direct drive extruder, 0.4~0.8mm Nozzles. With bowden extruder you might pay more attention to these tips: - Print slow 15-30 mm/s Printing speed - First layer settings. (Height 100% Width 150% speed 50% e.g.) - Retraction disabled. This would reduce messy, stringing or oozing printing result. - Increase Multiplier(Optional). set to 1.1 would help the filament bond well. - Cooling fan on after first layer. If you are having problems printing with soft filaments, firstly, and most importantly, slow the print down, run at 20mm/s will work perfectly. It is important when loading the filament to allow it to only just start extruding. Once you see the filament coming out the nozzle hit stop. The load feature pushes filament through quicker than a normal print and this can cause it to get caught in the extruder gear. Also feed the filament direct to the extruder, not through the feeder tube. This reduces the drag on the filament which can cause the gear to slip on the filament. I 1x SainSmart TPU Flexible Filament 1.75mm 250g(vacuum sealed...
  • Filamento TPU 1.75mm 0.8kg COLOR FOTO-1 IMP 3D [0TI3JUV0]
    Precio:  $199,339.00
    Agregar al Carrito   Vista

    Filamento TPU 1.75mm 0.8kg COLOR FOTO-1 IMP 3D [0TI3JUV0]

    -Titulo Original : SainSmart Orange Flexible TPU 3D Printing Filament, 1.75 mm, 0.8 kg, Dimensional Accuracy +/- 0.05 mm-Fabricante : SAINSMART-Descripcion Original: TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible. // Compatible with all FDM printers on the market that accept 1.75 mm filament. Including Prusa i3, Monoprice MakerSelect, SainSmart xCreality, WanHao & Qidi, and other RepRap printers. // With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament’s tendency to not warp. // Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more! // Color: SainSmart TPU filament is renowned for its high strength and flexibility. With the design freedom of 3D printing, SainSmart filament is the key to bringing your project, whether it be a weekend hobby or prototyping for a Fortune 500 company, from the sketchpad to reality. Each spool of SainSmart TPU filament comes with 0.8 kg/1.76 lb of material. This filament is drawn out to a diameter of 1.75 mm with a dimensional accuracy of +/- 0.05 mm, making it the perfect choice for most printers on the market. Diameter: 1.75 mm Material: Flexible TPU Net Weight: 0.8 kg Shore Hardness: 95 A Print Nozzle: 0.4 – 0.8 mm Extruder Temperature: 195 – 230°C Print Bed Temperature: 40 – 60°C Cooling Fan: On Print Slower: 15 – 30 m/s First Layer Settings: 100% Height. 150% Width, 50% Speed Disable Retraction: Should reduce oozing and stringing Cooling Fan: On after first layer Increase Multiplier: 1.1, should increase bonding Do not over extrude filament when loading. As soon as the filament start protruding from the nozzle, stop. Loading any faster will cause the filament to get caught in extruder gear. Feed the filament directly to the extruder, and not through the feeder tube. This reduces back tension in the filament as well as drag, ensuring proper feeding. 1x SainSmart TPU Flexible Filament 1.75mm 0.8kg vacuum sealed w/ desiccan...
  • Filamento TPU 1.75mm 0.8kg COLOR FOTO-1 IMP 3D [0TI3JUUQ]
    Precio:  $199,339.00
    Agregar al Carrito   Vista

    Filamento TPU 1.75mm 0.8kg COLOR FOTO-1 IMP 3D [0TI3JUUQ]

    -Titulo Original : SainSmart White Flexible TPU 3D Printing Filament, 1.75 mm, 0.8 kg, Dimensional Accuracy +/- 0.05 mm-Fabricante : SAINSMART-Descripcion Original: TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible. // Compatible with all FDM printers on the market that accept 1.75 mm filament. Including Prusa i3, Monoprice MakerSelect, SainSmart xCreality, WanHao & Qidi, and other RepRap printers. // With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament’s tendency to not warp. // Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more! // Color: SainSmart TPU filament is renowned for its high strength and flexibility. With the design freedom of 3D printing, SainSmart filament is the key to bringing your project, whether it be a weekend hobby or prototyping for a Fortune 500 company, from the sketchpad to reality. Each spool of SainSmart TPU filament comes with 0.8 kg/1.76 lb of material. This filament is drawn out to a diameter of 1.75 mm with a dimensional accuracy of +/- 0.05 mm, making it the perfect choice for most printers on the market. Diameter: 1.75 mm Material: Flexible TPU Net Weight: 0.8 kg Shore Hardness: 95 A Print Nozzle: 0.4 – 0.8 mm Extruder Temperature: 195 – 230°C Print Bed Temperature: 40 – 60°C Cooling Fan: On Print Slower: 15 – 30 m/s First Layer Settings: 100% Height. 150% Width, 50% Speed Disable Retraction: Should reduce oozing and stringing Cooling Fan: On after first layer Increase Multiplier: 1.1, should increase bonding Do not over extrude filament when loading. As soon as the filament start protruding from the nozzle, stop. Loading any faster will cause the filament to get caught in extruder gear. Feed the filament directly to the extruder, and not through the feeder tube. This reduces back tension in the filament as well as drag, ensuring proper feeding. 1x SainSmart TPU Flexible Filament 1.75mm 0.8kg vacuum sealed w/ desiccan...
  • Filamento TPU 1.75mm 0.8kg COLOR FOTO-1 IMP 3D [0TI3JUU6]
    Precio:  $199,339.00
    Agregar al Carrito   Vista

    Filamento TPU 1.75mm 0.8kg COLOR FOTO-1 IMP 3D [0TI3JUU6]

    -Titulo Original : SainSmart Gray Flexible TPU 3D Printing Filament, 1.75 mm, 0.8 kg, Dimensional Accuracy +/- 0.05 mm-Fabricante : SAINSMART-Descripcion Original: TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible. // Compatible with all FDM printers on the market that accept 1.75 mm filament. Including Prusa i3, Monoprice MakerSelect, SainSmart xCreality, WanHao & Qidi, and other RepRap printers. // With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament’s tendency to not warp. // Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more! // Color: SainSmart TPU filament is renowned for its high strength and flexibility. With the design freedom of 3D printing, SainSmart filament is the key to bringing your project, whether it be a weekend hobby or prototyping for a Fortune 500 company, from the sketchpad to reality. Each spool of SainSmart TPU filament comes with 0.8 kg/1.76 lb of material. This filament is drawn out to a diameter of 1.75 mm with a dimensional accuracy of +/- 0.05 mm, making it the perfect choice for most printers on the market. Diameter: 1.75 mm Material: Flexible TPU Net Weight: 0.8 kg Shore Hardness: 95 A Print Nozzle: 0.4 – 0.8 mm Extruder Temperature: 195 – 230°C Print Bed Temperature: 40 – 60°C Cooling Fan: On Print Slower: 15 – 30 m/s First Layer Settings: 100% Height. 150% Width, 50% Speed Disable Retraction: Should reduce oozing and stringing Cooling Fan: On after first layer Increase Multiplier: 1.1, should increase bonding Do not over extrude filament when loading. As soon as the filament start protruding from the nozzle, stop. Loading any faster will cause the filament to get caught in extruder gear. Feed the filament directly to the extruder, and not through the feeder tube. This reduces back tension in the filament as well as drag, ensuring proper feeding. 1x SainSmart TPU Flexible Filament 1.75mm 0.8kg vacuum sealed w/ desiccan...
  • Filamento TPU 1.75mm 0.8kg COLOR FOTO-1 IMP 3D [0TI3JUTM]
    Precio:  $199,339.00
    Agregar al Carrito   Vista

    Filamento TPU 1.75mm 0.8kg COLOR FOTO-1 IMP 3D [0TI3JUTM]

    -Titulo Original : SainSmart Black Flexible TPU 3D Printing Filament, 1.75 mm, 0.8 kg, Dimensional Accuracy +/- 0.05 mm-Fabricante : SAINSMART-Descripcion Original: TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible. // Compatible with all FDM printers on the market that accept 1.75 mm filament. Including Prusa i3, Monoprice MakerSelect, SainSmart xCreality, WanHao & Qidi, and other RepRap printers. // With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament’s tendency to not warp. // Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more! // Color: SainSmart TPU filament is renowned for its high strength and flexibility. With the design freedom of 3D printing, SainSmart filament is the key to bringing your project, whether it be a weekend hobby or prototyping for a Fortune 500 company, from the sketchpad to reality. Each spool of SainSmart TPU filament comes with 0.8 kg/1.76 lb of material. This filament is drawn out to a diameter of 1.75 mm with a dimensional accuracy of +/- 0.05 mm, making it the perfect choice for most printers on the market. Diameter: 1.75 mm Material: Flexible TPU Net Weight: 0.8 kg Shore Hardness: 95 A Print Nozzle: 0.4 – 0.8 mm Extruder Temperature: 195 – 230°C Print Bed Temperature: 40 – 60°C Cooling Fan: On Print Slower: 15 – 30 m/s First Layer Settings: 100% Height. 150% Width, 50% Speed Disable Retraction: Should reduce oozing and stringing Cooling Fan: On after first layer Increase Multiplier: 1.1, should increase bonding Do not over extrude filament when loading. As soon as the filament start protruding from the nozzle, stop. Loading any faster will cause the filament to get caught in extruder gear. Feed the filament directly to the extruder, and not through the feeder tube. This reduces back tension in the filament as well as drag, ensuring proper feeding. 1x SainSmart TPU Flexible Filament 1.75mm 0.8kg vacuum sealed w/ desiccan...
  • Filamento TPU 1.75mm 0.8kg COLOR FOTO-1 IMP 3D [0TI3JUSI]
    Precio:  $199,339.00
    Agregar al Carrito   Vista

    Filamento TPU 1.75mm 0.8kg COLOR FOTO-1 IMP 3D [0TI3JUSI]

    -Titulo Original : SainSmart Green Flexible TPU 3D Printing Filament, 1.75 mm, 0.8 kg, Dimensional Accuracy +/- 0.05 mm-Fabricante : SAINSMART-Descripcion Original: TPU (Thermoplastic Polyurethane) is a subclass of thermoplastics which prints strong parts that are also flexible. // Compatible with all FDM printers on the market that accept 1.75 mm filament. Including Prusa i3, Monoprice MakerSelect, SainSmart xCreality, WanHao & Qidi, and other RepRap printers. // With proper settings, TPU is easy to print thanks to excellent bed adhesion and the filament’s tendency to not warp. // Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more! // Color: SainSmart TPU filament is renowned for its high strength and flexibility. With the design freedom of 3D printing, SainSmart filament is the key to bringing your project, whether it be a weekend hobby or prototyping for a Fortune 500 company, from the sketchpad to reality. Each spool of SainSmart TPU filament comes with 0.8 kg/1.76 lb of material. This filament is drawn out to a diameter of 1.75 mm with a dimensional accuracy of +/- 0.05 mm, making it the perfect choice for most printers on the market. Diameter: 1.75 mm Material: Flexible TPU Net Weight: 0.8 kg Shore Hardness: 95 A Print Nozzle: 0.4 – 0.8 mm Extruder Temperature: 195 – 230°C Print Bed Temperature: 40 – 60°C Cooling Fan: On Print Slower: 15 – 30 m/s First Layer Settings: 100% Height. 150% Width, 50% Speed Disable Retraction: Should reduce oozing and stringing Cooling Fan: On after first layer Increase Multiplier: 1.1, should increase bonding Do not over extrude filament when loading. As soon as the filament start protruding from the nozzle, stop. Loading any faster will cause the filament to get caught in extruder gear. Feed the filament directly to the extruder, and not through the feeder tube. This reduces back tension in the filament as well as drag, ensuring proper feeding. 1x SainSmart TPU Flexible Filament 1.75mm 0.8kg vacuum sealed w/ desiccan...
  • Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [72FSBKGR]
    Precio:  $109,529.00
    Agregar al Carrito   Vista

    Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [72FSBKGR]

    -Titulo Original : SAINSMART 1.75mm 250g Flexible TPU 3D Printing Filament, Dimensional Accuracy +/- 0.05 mm (White)-Fabricante : SAINSMART-Descripcion Original: Approximately 250 grams, feet of filament on a spool with a case so it's not flopping all over the place. Splash Spools store easily in a desk drawer, stacked space or even hang on a wall. Be sure you are ordering the correct diameter for your printer. This product is only available in 1.75mm. // Specially formulated plastic with increased amount of flexibility, with rigid structure. Recommended for printing objects, which will be impacted more than normal ones. // SAINSMART filament is 100% TPU. TPU is essentially polyurethane, it belongs to the TPE class of thermoplastics. Recommended for printing objects, which will be impacted more than normal ones. // Flexible Filament does not feed well on all 3D printers. Please check your printer specifications before ordering. Only available in 1.75mm diameter. // It's better to work on direct drive extruders. Please print slowly and read the tips if you are bowden. // Color: SainSmart TPU filament is featured by its high strength and flexibility, like a hybrid of plastic and rubber. 95A TPU has high abrasion resistance and low compression compared to rubber parts, especially at higher infill. In comparison with most common filaments like PLA and ABS, TPU must be run much slower. - Material: Rep-Flex TPU - Vacuumed Sealed with desiccant - Shore Hardness: 95A - Weight: 250g Spool - Diameter: 1.75mm (+/- 0.05mm) - Recommended extruder temperature:195 - 230°C - Recommended platform temperature: 40 - 60°C Recommended for printers with direct drive extruder, 0.4~0.8mm Nozzles. With bowden extruder you might pay more attention to these tips: - Print slow 15-30 mm/s Printing speed - First layer settings. (Height 100% Width 150% speed 50% e.g.) - Retraction disabled. This would reduce messy, stringing or oozing printing result. - Increase Multiplier(Optional). set to 1.1 would help the filament bond well. - Cooling fan on after first layer. If you are having problems printing with soft filaments, firstly, and most importantly, slow the print down, run at 20mm/s will work perfectly. It is important when loading the filament to allow it to only just start extruding. Once you see the filament coming out the nozzle hit stop. The load feature pushes filament through quicker than a normal print and this can cause it to get caught in the extruder gear. Also feed the filament direct to the extruder, not through the feeder tube. This reduces the drag on the filament which can cause the gear to slip on the filament. I 1x SainSmart TPU Flexible Filament 1.75mm 250g(vacuum sealed...
  • Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [71SJ8SDQ]
    Precio:  $109,529.00
    Agregar al Carrito   Vista

    Filamento TPU 1.75mm 0.25kg COLOR FOTO-1 IMP 3D [71SJ8SDQ]

    -Titulo Original : SAINSMART 1.75mm 250g Flexible TPU 3D Printing Filament, Dimensional Accuracy +/- 0.05 mm (Blue)-Fabricante : SAINSMART-Descripcion Original: Approximately 250 grams, feet of filament on a spool with a case so it's not flopping all over the place. Splash Spools store easily in a desk drawer, stacked space or even hang on a wall. Be sure you are ordering the correct diameter for your printer. This product is only available in 1.75mm. // Specially formulated plastic with increased amount of flexibility, with rigid structure. Recommended for printing objects, which will be impacted more than normal ones. // SAINSMART filament is 100% TPU. TPU is essentially polyurethane, it belongs to the TPE class of thermoplastics. Recommended for printing objects, which will be impacted more than normal ones. // Flexible Filament does not feed well on all 3D printers. Please check your printer specifications before ordering. Only available in 1.75mm diameter. // It's better to work on direct drive extruders. Please print slowly and read the tips if you are bowden. // Color: SainSmart TPU filament is featured by its high strength and flexibility, like a hybrid of plastic and rubber. 95A TPU has high abrasion resistance and low compression compared to rubber parts, especially at higher infill. In comparison with most common filaments like PLA and ABS, TPU must be run much slower. - Material: Rep-Flex TPU - Vacuumed Sealed with desiccant - Shore Hardness: 95A - Weight: 250g Spool - Diameter: 1.75mm (+/- 0.05mm) - Recommended extruder temperature:195 - 230°C - Recommended platform temperature: 40 - 60°C Recommended for printers with direct drive extruder, 0.4~0.8mm Nozzles. With bowden extruder you might pay more attention to these tips: - Print slow 15-30 mm/s Printing speed - First layer settings. (Height 100% Width 150% speed 50% e.g.) - Retraction disabled. This would reduce messy, stringing or oozing printing result. - Increase Multiplier(Optional). set to 1.1 would help the filament bond well. - Cooling fan on after first layer. If you are having problems printing with soft filaments, firstly, and most importantly, slow the print down, run at 20mm/s will work perfectly. It is important when loading the filament to allow it to only just start extruding. Once you see the filament coming out the nozzle hit stop. The load feature pushes filament through quicker than a normal print and this can cause it to get caught in the extruder gear. Also feed the filament direct to the extruder, not through the feeder tube. This reduces the drag on the filament which can cause the gear to slip on the filament. I 1x SainSmart TPU Flexible Filament 1.75mm 250g(vacuum sealed...
  • Filamento de nailon con relleno de fibra de carbono ePA-CF
    Precio:  $420,859.00
    Agregar al Carrito   Vista

    Filamento de nailon con relleno de fibra de carbono ePA-CF

    -Titulo Original : SainSmart 1.75mm Black EPA-CF Carbon Fiber Filled Nylon Filament 1KG (2.2lbs) Spool For 3D Printer-Fabricante : SainSmart-Descripcion Original: [Increíble resistente] Utilizamos una nueva fórmula para mejorar su rigidez y rendimiento de impresión: 75% nailon junto con 25% fibra de carbono, que está listo para enfrentarse a tu próximo proyecto. Con no menos del 20% de fibra de carbono a base de nailon, SainSmart CF20 es fácil de imprimir, con un gran acabado de superficie y resistencia para tomar en algunos de tus trabajos más exigentes. Tasa de contracción más baja: cuenta con una menor tasa de contracción, mayor resistencia y rigidez, menos deformación y más resistente al desgaste en comparación con el filamento de nailon tradicional. [Impresión suave] Produce piezas de alta calidad que son fáciles de procesar y se ven geniales; todo mientras que ofrecen funcionalidad, rigidez, estabilidad dimensional y resistencia al calor en un material fácil de imprimir. [Aplicación] Es adecuado para aquellos que buscan hacer piezas industriales fuertes y flexibles, prótesis, equipos médicos, disfraces complejos, etc. Las temperaturas de impresión óptimas de 240 a 500.0 °F con una temperatura de superficie de construcción de 80 a 194.0 °F hacen que sea una gran opción para impresoras 3D profesionales y domésticas. [Consejos] La fibra de carbono es abrasiva y en general, estas fibras acelerarán rápidamente el desgaste de la boquilla de las boquillas de latón. Se recomienda utilizar boquillas de acero inoxidable u otras aleaciones endurecidas. Para una mejor adherencia y resistencia de la capa, se necesita una temperatura ambiente constante, te recomendamos imprimir en una caja o con una impresora cerrada para obtener el mejor resultado....
Mostrar del 1 al 17 (de 17 productos)
Páginas de Resultados:  1 
Destacados
Revisar todos destacados

Información

Información

Nuestras ofertas

Nuestras ofertas

Su cuenta

Su cuenta

Mantente conectado

Mantente conectado

Contáctenos

Contáctenos

elbazardigital.com   © 2024