Arriba

Accesorios para Cámaras > Soportes y Estabilizadores > Estabilizadores para Cámaras

Mostrar: 
Mostrar del 1 al 24 (de 366 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Smallrig 1659 15mm Rods Pack With M12 Thread Rod Cap Conn...
    Precio:  $5,777.00

    Smallrig 1659 15mm Rods Pack With M12 Thread Rod Cap Conn...

    -Titulo Original : SMALLRIG 15mm Rods Pack with M12 Thread Rod Cap Connectors Aluminum Alloy Rods Combination for for Rig Mattebox Follow Focus 15mm Rod System - 1659-Fabricante : SMALLRIG-Descripcion Original: They are industrial standard 15mm rods for 15mm rod systems. // 15mm rod connectors are included. It allows you to connect the 15mm rods together. // Material: Aluminum Alloy Color: Black // Both 2 pair of 15mm rods has inner M12 thread on each end of the rods. // Includes one pair of 15mm rods 8 inches long and one pair of 15mm rods 12inches long. // This is a marketing mix. Pair of 15mm rods-8 inches/20cm long; Pair of 15mm rods-12inches/30cm long; Includes: 2pcs M12-20cm rods 2pcs M12-30cm rods 2pcs Rod connectors Material: Aluminum Alloy Weight: 230...
  • SMALLRIG 2225 RX100 Cage Kit Compatible with Sony RX100 V...
    Precio:  $12,778.00

    SMALLRIG 2225 RX100 Cage Kit Compatible with Sony RX100 V...

    -Titulo Original : SMALLRIG RX100 Cage Kit Compatible with Sony RX100 VI (for Sony M6) Camera with Wooden Handle Handgrip – 2225-Fabricante : SMALLRIG-Descripcion Original: Designed ONLY for Sony RX100 VI (RX100 M6) Camera, it allows the screen flipping and access to all ports and buttons on the camera. Many mounting points broaden its use and provide more filmmaking possibilities. 【Not for Sony RX100 III/IV/V camera】 // RX100 VI cage secures the camera tightly by screwing up the lens ring instead of the bottom screw and it would not block any ports or buttons on the camera // Pocket-Size: light and small (weight of 0.27lbs), it is easy to carry around, you could even put it in your pocket. If you want a better protection for your HDMI cable, SmallRig HDMI cable lock 1693 is your best choice // Secured in place with two M4 screws, the ergonomic handcrafted rosewood grip on the right side offers better hand-held shooting experience. What’s more, there is enough room for Sony AG-R2 Grip for RX100 series after removing the wood handle // Mounting threads on the bottom could be mounted with different quick release plates for tripod shooting. Built-in Nato rail, threaded holes and locating points for arri standard allow you to attach more accessories, such as micphone or monitor //...
  • Smallrig 2295 Side Bracket for Canon C200 and C200B 2295...
    Precio:  $5,547.00

    Smallrig 2295 Side Bracket for Canon C200 and C200B 2295...

    -Titulo Original : SMALLRIG Side Bracket for Canon C200 and C200B 2295-Fabricante : SMALLRIG-Descripcion Original: ...
  • SMALLRIG 1598 Switching Plate Camera Easy Plate for Railb...
    Precio:  $1,986.00

    SMALLRIG 1598 Switching Plate Camera Easy Plate for Railb...

    -Titulo Original : SMALLRIG Switching Plate Camera Easy Plate for Railblocks, Dovetails and Short Rods - Longer Version - 1598-Fabricante : SMALLRIG-Descripcion Original: SmallRig camera plate 1598 is equipped with various threaded holes (1/4’’-20 thread & 3/8’’-16 thread), with standard spacing (9mm center to center), allows to set up multiple configuration for your support system // Universal Camera Plate - it fits perfectly with SmallRig rail blocks, dovetails and short rods // Multipurpose - work as a switching plate when attach the plate to the bottom of a DSLR cage, provide lots of options for mounting accessories // Longer Version - length of 90mm, width of 50mm // High Quality – made of aluminum alloy, sturdy and durable // Easy-Plate-1598 L*W*H: 90MM*50MM*10MM Material: Aluminum Alloy Net Weight:70...
  • SMALLRIG 1701 Camera Long Lens Carry Handle for Camera Le...
    Precio:  $10,984.00

    SMALLRIG 1701 Camera Long Lens Carry Handle for Camera Le...

    -Titulo Original : SMALLRIG Camera Long Lens Carry Handle for Camera Lens, Camera Cage for Sony/Canon/Nikon - 1701-Fabricante : SMALLRIG-Descripcion Original: Long Lens Carry Handle 1701 is a simple and lightweight handle suitable for any long lens. // It attaches to the tripod collar or the top plate of a cage with a 1/4-20 thumbscrew. The knurled knob is larger than the pad so you can turn it easily. The 63mm sliding slot allows for forward and backward adjustment to balance your setup. // There is a shoe mount on top of the grip for attaching accessories such as shoe-mount style video lights, flashes, microphones. In addition, there are 18 x 1/4?20 accessory holes on the sides. // The rubber-coated pad to lessen stress on the screw, the handle will not turn like it would if it was metal to metal. // Aluminum Alloy 1x handle 1x 1/4 Screw 1x Hex Spanner 258...
  • Smallrig 15mm Cheese Rod (M12) with 1/4-Inch and 3/8-Inc...
    Precio:  $2,695.00

    Smallrig 15mm Cheese Rod (M12) with 1/4-Inch and 3/8-Inc...

    -Titulo Original : SMALLRIG 15mm Cheese Rod (M12) with 1/4-Inch and 3/8-Inch Thread Holes - 197 mm in Length-Fabricante : SMALLRIG-Descripcion Original: 15mm Cheese Rod with 1/4” and 3/8” mounting hole to connect 15mm rod accessories, such as SmallRig VersaFrame cages, LCD mount, monitor mount, EVF mount, 15mm rod clamp // M12 thread hole on each end // 197mm in length // Made of Aluminium alloy // It is a replacement of the side bar of SmallRig dslr cage - B01N4AUHVZ //...
  • Neewer Aerospace Aluminum Alloy Dual Handheld Grip for...
    Precio:  $10,110.00

    Neewer Aerospace Aluminum Alloy Dual Handheld Grip for...

    -Titulo Original : Neewer Aerospace Aluminum Alloy Dual Handheld Grip for Neewer Crane/Crane M/Crane V2, Zhiyun Crane/Crane M/Crane V2, 3-Axis Handheld Stabilizer,1.5 feet/46.5 centimeters Non-slip Durable Camera Gimbal-Fabricante : Neewer®-Descripcion Original: Made of Aerospace Aluminum Alloy: Lightweight and durable; It is also portable when disassembled; Note:this Dual Handle does not fit Crane 2 // Specially designed for Neewer Crane/Crane M 3-Axis, Zhiyun Crane and Zhiyun Crane M 3 Axis Handheld Stabilizer; Enable you to shift from one hand to two hands easily when shooting // Non-slip Design: The dual handles are consisted by non-slip plastic material with patterns to increase friction; You can hold it tightly without worrying about the falling off due to enduring application // 1/4-inch Screw Hole: Two 1/4-inch screw holes on the grip enable you to connect monitor, Bluetooth remote or any other accessories to your cameras // Note: The gimbal, camera and monitor are not included // Color: The dual handheld grip is specially designed for Neewer Crane/Crane M 3-Axis, Zhiyun Crane and Zhiyun Crane M 3 Axis Stabilizer. It enables you to shift from one hand to two hands easily when shooting, and the non-slip design adds securely to the camera, make sure the camera still hold in position after long time operation. The lightweight and durable aerospace aluminum alloy material makes the grip portable, and with the grip, you can save a lot energy and time to obtain a nice shooting. Two 1/4-inch screw holes allow you to attach accessories to your camera, such as monitor, Bluetooth remote and so forth. Add more convenience to shooting. Material: Aerospace Aluminum Alloy Color: Black Length: 46.5 centimeters/1.5 feet Weight: 24.5 ounces/694.5 grams 1 x Dual Handheld Grip for Zhiyun Crane Stabilize...
  • SMALLRIG 1773 Cage for Blackmagic Micro Cinema Camera for...
    Precio:  $14,461.00

    SMALLRIG 1773 Cage for Blackmagic Micro Cinema Camera for...

    -Titulo Original : SMALLRIG Cage for Blackmagic Micro Cinema Camera for BMMCC and for Blackmagic Micro Studio Camera for BMMSC Camera - 1773-Fabricante : SMALLRIG-Descripcion Original: SMALLRIG Cage for Blackmagic Micro Cinema Camera/ for Blackmagic Micro Studio Camera 1773 is a perfect cage for Blackmagic Micro Cinema Camera or for Blackmagic Micro Studio Camera. With two screws on the bottom to mount camera, the camera will be very stable when you're shooting. // Two strips in the back to protect the battery and convenient hand-held. Enough space on both sides to HDMI expansion port connectors and make easier access to SD card. // There are NATO-style side rails and two cold shoe mounts can mount more accessory. // Besides, you can purchase another products SMALLRIG Lock HDMI Protector 1693 and SMALLRIG Metabones Lens Adapter Support 1787 to protect the HDMI and support the Metabones. //...
  • Smallrig 2213 Portable Folding Multi-Tool Set with Screwd...
    Precio:  $3,789.00

    Smallrig 2213 Portable Folding Multi-Tool Set with Screwd...

    -Titulo Original : SMALLRIG Portable Folding Multi-Tool Set with Screwdrivers and Hex Key 2.5, 3, 4, 3/16mm, Multi-Thread Holes – 2213-Fabricante : SMALLRIG-Descripcion Original: Specially designed for video photographers, also can be used as a repair tool, etc // 7 in 1 multi-function toolkit: 4 Allen Wrenches 2.5, 3, 4, 3/16, 1 slotted screwdriver, 1 Phillips screwdriver, and 1 Torx T25 driver // Additional M3, M4, M5, 1/4’’, 3/8’’threaded holes on the side for the spare screw (please note that screws are not included in this kit) // Pocket-sized and compact design, easy for storage // Made of stainless steel and aluminum alloy, sturdy and durable // Size: 1. 7 functional tools included: 4 Allen Wrenches 2.5, 3, 4, 3/16, 1 slotted screwdriver, 1 Phillips screwdriver and 1 Torx T25 driver; 2. All tools folded in one pocket-sized compact set; 3. Additional threaded holes M3, M4, M5, 3/8 on the side for spare screws. Universal 1 x Folding Tool Set 82 x 24 x 12mm 120 x 35 x 25mm 79g 90g Stainless Steel + Aluminum Allo...
  • Smallrig 1446 Camera Top Handle Grip With Top Cold Shoe B...
    Precio:  $3,900.00

    Smallrig 1446 Camera Top Handle Grip With Top Cold Shoe B...

    -Titulo Original : SMALLRIG Camera Top Handle Grip with Top Cold Shoe Base for DSLR Camera Cage Video Camcorder Rig, Rubber - 1446-Fabricante : SMALLRIG-Descripcion Original: SmallRig Top Handle (Rubber) 1446 bolts on directly with 2pcs 1/4" screws (the adjustable space between two 1/4'' screws is 30mm-40mm). // 1/4-20 mounting points in front for accessory mounting, such as SmallRig rosette-1272, clamp-1407, Railblock-1421 or Cold Shoe. // Comes with a built-in cold shoe base on top of the handle for more extension, such as ball head, magic arm (smallrig 1498), cameras lights and microphones, or other accessories. // Material: Aluminum, Rubber. // Net weight: 160g (0.35lb) // 1. Built-in Shoe mounts on the top2. 1/4’’-20 & 3/8’’-16mounting points for additional accessoriesCamera accessories with 1/4’’ threads1 x Top Handle(rubber)1 x Hex Spanner2 x 1/4''-12.7 Screws 70x132x38mm 160g 60x180x100mm 180g Aluminum Alloy, Rubbe...
  • Smallrig 1682 Quick Plate Mount For Dji Ronin Ronin-m (mi...
    Precio:  $3,780.00

    Smallrig 1682 Quick Plate Mount For Dji Ronin Ronin-m (mi...

    -Titulo Original : SMALLRIG Quick Plate Mount for DJI Ronin Ronin-M (Mini) and Ronin MX - 1682-Fabricante : SMALLRIG-Descripcion Original: The quick release plate is exclusively designed for Ronin, Ronin M, and Ronin MX Gimbal stabilizers // The mounting plate could be worked as a tripod adapter and make it easy to attach the Ronin to a tripod, jib or any other accessories // Features two 1/4’’ threaded holes, two M5 holes and four 1/4'' countersinks for more accessories // Please unlock and slide out the Ronin handlebar assembly to install the mount // Made of aluminum alloy, sturdy and durable // Compatible With for DJI Ronin, Ronin-M and Ronin-MX SmallRig Ronin-M handheld to tripod adapter 1689 Material: Aluminum Alloy Includes: 1x Quick Plate Mount(mini)-1682 4x 1/4 Screws 1x Hex Spanner Net Weight: 82...
  • Smallrig 2072 Articulating Magic Arm with Double Ballhead...
    Precio:  $12,962.00

    Smallrig 2072 Articulating Magic Arm with Double Ballhead...

    -Titulo Original : SMALLRIG Articulating Magic Arm with Double Ballhead NATO Clamps, Monitor Mount for Field Monitor, Lights, Audio Recorders, DIY Camera Rig - 2072-Fabricante : SMALLRIG-Descripcion Original: An articulating magic arm with double NATO Clamp Ballhead (Made of aluminium alloy, durable, solid and sturdy), which can realize quick released and attachment. It could be slided to get the balance of the whole kit by the NATO rail design // Flexibility: It could be attached to a camera or monitor cage with NATO rail by the NATO clamp. The monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp // Strong compatibility: The double NATO Clamp Ballhead can not only be attached to camera cages with NATO rail (such as gh5 cage rigs SmallRig 2049, SmallRig 2050, SmallRig 2051, SmallRig 2052) , top plates or side plates (such as Side Plate SmallRig 1847), but also can be attached to monitor cages with NATO rail, such as Blackmagic Cage(5") SmallRig 1726, SmallRig 2008, Ninja Assassin Cage SmallRig 1788, SmallHD Cage SmallRig 1834 or other products with nato rail // A single wingnut (rotary knob) is applied to lock and tighthen the double ballhead directly, and thumb screws on both ends are utilized to lock the devices manually // Please note: the best load (max load) of the NATO Clamp Ballhead is 1.5kg // Color: 1. Quick release with the NATO rail design 2. Easy tight locking with the rotary knob 3. 360-degree rotationSmallRig Double NATO Clamp Ball Heads 2072 can not only be attached to camera cages with NATO rail (such as gh5 cage rigs, SmallRig 2049: B075R7238M, SmallRig 2050: B076HJXT2X, SmallRig 2051: B078MKFZ1M, SmallRig 2052: B076HGX2PB) , top plates or side plates (such as Side Plate SmallRig 1847), but also can be attached to monitor cages with NATO rail, such as Smallrig Video Assist Cage(5) for Blackmagic 1726 (ASIN:B06ZZBVFPG), Ninja Assassin Monitor Cage SmallRig 1788 (ASIN:B071R2PP3L), 7 Monitor cage 2008 for ATOMOS Shogun Inferno, Ninja Inferno, Shogun Flame, Ninja Flame (ASIN:B072QKXQKT) and Monitor Cage SmallRig 1834 for Small HD 700 Series(ASIN:B071CKJF1Y). The NATO rail design enables quick release and slide adjustment. The combination of double ball head enables the 360 degree rotation so that the monitors can be adjusted in different angels. Users can easily lock the ball head tight and stabilized by hand due to the rotary knobs. In addition, each ball comes along with a rubber pad. The rubber pads protect the monitors from scratching. Universal an articulating arm with double ballhead nato clamps 140x26x52mm 145g 155x80x40mm Aluminum Alloy, Steel Stainles...
  • SMALLRIG 2087 A7RIII / A7III Camera Cage for Sony A7RIII ...
    Precio:  $16,347.00

    SMALLRIG 2087 A7RIII / A7III Camera Cage for Sony A7RIII ...

    -Titulo Original : SMALLRIG A7RIII / A7III Camera Cage for Sony A7RIII / A7III Camera (ILCE-7RM3 / A7R Mark III) with Cold Shoe and Locating Holes – 2087-Fabricante : SMALLRIG-Descripcion Original: 【FULL ACCESSIBILITY】The cage would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot. The hot shoe is accessible for Sony XLR-K2M/K1M // 【PERFECT PROTECTION】The updated alpha A7RIII/A7III cage add a second locking point on the right side to prevent from twisting and two pieces of rubber cushion on the bottom that prevent the camera from scratching // 【MOUNTING POINTS】Add plenty of 1/4’’-20 and 3/8’’-16 threaded holes for attaching more accessories. Also features locating holes for ARRI standard and a cold shoe on the top to attach corresponding accessories // 【RECOMMENDATIONS】It could attach Magic Arm 1497/1498/2070 for monitor. Arri locating points on the top are compatible with corresponding locating pins, like Magic Arm with Anti-rotation Magic Arm Adapter 2026 for monitor. 1/4''-20 threaded holes on the top could be mounted with Top Handle 1984/1638 for handheld shooting, or they could be mounted with EVF Support 1842 for better shooting // 【SMALLRIG WARRANTY】Friendly 24-hour Customer Support, 30-day No-hassle Return Service, Worry-free 2-year Warranty. Please feel free to contact us if there is any performance issue with the item //...
  • Smallrig 2170 Mounting Rod Clamp Ring For Zhiyun Crane V2...
    Precio:  $5,041.00

    Smallrig 2170 Mounting Rod Clamp Ring For Zhiyun Crane V2...

    -Titulo Original : SMALLRIG Mounting Rod Clamp Ring for Zhiyun Crane V2/Crane Plus/Crane M Gimbal with with 1/4 & 3/8 Thread, Payload 14lb - 2170-Fabricante : SMALLRIG-Descripcion Original: 【HIGH CUSTOMIZATION】Especially designed for Zhiyun Crane V2/Crane Plus/Crane M handheld gimbal stabilizer // 【MOUNTING POINTS】Features 1/4’’-20 threaded holes that allow you to attach more accessories, such as SmallRig magic arm 2070. Also comes with 3/8’’ locating holes for ARRI standard, you can mount a SmallRig Support 2026 to hold your monitor // 【HANDHELD SETUP】Optional NATO Rail 1195 and NATO Top Handle 1688 allows for single handheld shooting. Optional rod clamp 1493 and rod handle kit 998 allows for double handheld shooting. // 【TRIPOD SHOOTING】It can be attached on the tripod by mounting the bottom 1/4 threaded hole of Zhiyun Crane V2/ Plus and the bottom 1/4 threaded hole on the clamp together // 【PLEASE NOTE】Max load: 6.5kg. This clamp can be attached to three positions of Zhiyun Crane V2/Plus handle by two M4 screws // 1.It is compatible with Zhiyun Crane V2/Crane Plus/Crane M Handheld Gimbal 2.It can be attached to three positions of the Zhiyun handle by two M4 screws. 3.Features multiple 1/4 screws and two 3/8 holes for ARRI standard for accessory attachment. For Zhiyun Crane V2/Crane Plus/Crane M Handheld Gimbal Stabilizer 1 x Clamp 2170 1 x Hex Spanner 64x56.5x12mm 75x75x25mm 71g Aluminum Allo...
  • Smallrig 1789 Camera Cage For Canon Eos 80d With Nato Rai..
    Precio:  $19,908.00

    Smallrig 1789 Camera Cage For Canon Eos 80d With Nato Rai..

    -Titulo Original : SMALLRIG Camera Cage for Canon EOS 80D with NATO Rail, Cold Shoe - 1789-Fabricante : SMALLRIG-Descripcion Original: SMALLRIG Cage for Canon EOS 80D / 70DDSLR 1789 is an appropriative and lightweight design for Canon EOS 80D / 70D // It provides an abundance of 1/4"-20 and 3/8"-16 threads holes for easily adding accessories // Integrated a cold shoe on the top allows for mounting the flash lamp, microphone or monitor etc. On the right side, there are 3 thread holes for fixing the HDMI cable clamp // Features built-in NATO rail on the left side that allows you to quickly release and attach accessories with NATO clamp. Mounting SMALLRIG Side Handle - 2187 for hand-held shooting // The cage would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot // : Appropriative camera cage for CANON 80D / 70D, very solid and form-fitting. NATO rail for easier mounting. Leaves access open to SD card slot, battery compartment, and all buttons/controls. for CANON EOS 80D / 70D : 1 x Cage 8 x M4 Screw 1 x Hex Spanner 119 x 158 x 93mm :277g : 16.5x15.5x8.5mm 375g Aluminum Allo...
  • Neewer Film Movie Video Making System Kit for Canon N
    Precio:  $33,036.00

    Neewer Film Movie Video Making System Kit for Canon N

    -Titulo Original : Neewer Film Movie Video Making System Kit for Canon Nikon Sony and Other DSLR Cameras Video Camcorders, Includes C-Shaped Bracket,Handle Grip,15mm Rod,Matte Box,Follow Focus,Shoulder Rig (Red+Black)-Fabricante : Neewer-Descripcion Original: PACKAGE INCLUDES: (1)C-shape bracket, (1)Top Handle Grip, (2)15mm Rod, (1)Matte Box, (1)Follow Focus, (1)Shoulder Rig, (1)2.5 pounds/1.1 kilograms Counter Weight; This film movie system kit plays supporting and helpful role in assisting moving shooting, which can achieve better movie effect // C-SHAPE BRACKET WITH HAND GRIP: This C-shape bracket with a top handle grip can easily transform your rig into a handheld rig, greatly boost the portability of your devices; Counter Weight specially designed for balancing your shoulder mount rig // MATTE BOX: Adjustable height (up to 45mm) according to the lens of camera on the rail rod system; Also works with standard 15mm rails, center-to-center rails distance 60mm // FOLLOW FOCUS: Shoot with variety of options, such as shooting with DSLR camera, video, camcorder and so on. It provides repeatable and accurate focusing, which makes you shoot precisely, focus precisely and operate smoothly // SHOULDER RIG: It includes 15mm rod, shoulder mount, soft rubber shoulder pad and dual-hand handgrip for all DSLR cameras video camcorders; Soft rubber pad makes it possible to deliver excellent shooting effects without any jerk or motion problems // Color: Note: Camera and Tripod are NOT included. Description: Top Handle Grip: Two rubber coated handles, comfortable to hold and spread apart for stabilization. Portable and lightweight. Easy to assemble or disassemble. The C-shaped Bracket: More mounting options. The bracket comes with 1/4 inch screw thread and 3/8 inch screw thread in it for you to mount your accessories. Can be mounted in both ways to your liking. A slip-proof rubber handle gives you a firm and comfortable grip. Red screw knobs to hold tight the bracket. Fit Rail Diameter: 15 mm Center-to-Center Distance: 60mm Matte Box: The flags provides extra flare reduction and improves the quality of videos. The side flags can be removed quickly and be attached or detached easily. It works with standard 15mm rail rod support systems, and fits lens from 43mm to 77mm sizes.(others do not fit.) The matte box is designed for most DV cameras with wide angle lenses. Follow Focus: Adjustable locking system. Compatible with all DSLR cameras, video cameras, HDV, DV, specially for HDSLR camera with movie function. Gear drive can be mounted from either side. Shoulder Rig: Can be installed with video-capture series of related accessories. Suitable for 1/4 inch screw-holes digital SLR cameras and camcorders. Can be installed rails (tube diameter 15mm center distance 60mm). Counter weight: The 2.5 pounds/1.1 kilograms Counter Weight, Specially designed for balancing your shoulder mount rig. Specifications: Color: Red + Black Package Contents: 1 x C-shaped Bracket 1 x Top Handle Grip 2 x 15mm Rod 1 x Matte Box 1 x Follow Focus 1 x Shoulder Rig 1 x Counter Weigh...
  • SMALLRIG 1860 25mm 1 inch Rod Clamp for Ronin-M, Ronin MX...
    Precio:  $6,292.00

    SMALLRIG 1860 25mm 1 inch Rod Clamp for Ronin-M, Ronin MX...

    -Titulo Original : SMALLRIG 25mm 1 inch Rod Clamp for Ronin-M, Ronin MX, Freefly MOVI - 1860-Fabricante : SMALLRIG-Descripcion Original: SMALLRIG 25mm Rod Clamp For DJI Ronin-M,Ronin MX 1860 is aiming at mounting additional accessories on the camera series for DJI Ronin // Suitable for Ronin M, Ronin MX and any other items with 25mm or 1 inche rods // EVF, Ball Head, Cold Shoe mount can be installed by screws on arrays of 1/4'' and 3/8'' screw holes // Compatibility: for Ronin M, Ronin MX and any other 25mm or 1 inch rods // Note: It doesn't fit for DJI Ronin, since the diameter for DJI Ronin bar is 30mm // : 1.Quick clamp on the 25mm rod; 2.Optional screw holes for other mounts assembled : 1x 25mm Rod Clamp 1860 1x Hex Spanner 2x1/4-20 Screw : 65g : 80g : 48x28.5x43mm : 104x96x30mm : Aluminum Allo...
  • Smallrig 2221 Rod Clamp Ring Extension Mounting Ring Comp...
    Precio:  $6,899.00

    Smallrig 2221 Rod Clamp Ring Extension Mounting Ring Comp...

    -Titulo Original : SMALLRIG Rod Clamp Ring Extension Mounting Ring Compatible with DJI Ronin S Gimbal Stabilizer for DSLR Camera w/NATO Rail, 1/4'' Threaded Holes and 3/8'' Locating Holes for ARRI Standard – 2221-Fabricante : SMALLRIG-Descripcion Original: 【Only for DJI Ronin S Stabilizer】SmallRig Rod Clamp Ring 2221 is exclusively designed for DJI Ronin S stabilizer. Secure tightly via 2 long M4 screws on sides, compact and durable // 【For More Accessories】This Mounting Ring features 1/4’’-20 threaded holes on each side and 2 arri 3/8’’ locating holes on two sides, allows you to attach more accessories, such as Articulating Arm 2070, which can greatly prevent your monitor from accidentally falling off // 【Nato Rail For Quick Release】Built-in nato rail on each side can be mounted with nato clamp, fit the need of quick release from customers // 【Scratch Resistance】Add rubber cushions to prevent your gimbal from scratching, reduce wear and prolong the service life // 【Recommended Collocation】For better handheld shooting, you can mount SmallRig rosette adapter 2046 onto the built-in nato rail so as to attach SmallRig extension arm 1684 and wooden handle 1941 on the rosette // 1. Designed for Ronin S Gimbal. 2. Features nato rail on each side allows to quick release accessories. 3. Multiple 1/4”-20 and two 3/8” holes for ARRI standard for accessory attachment. 4. Add rubber inside the clamp to prevent scratching the gimbal. For Ronin S Gimbal Stabilizer 1 X Rod Clamp 1 X Hex Spanner 2 X M4 Screw 88 X 79 X 20.8mm 131g Aluminum Allo...
  • Smallrig 2220 Super Clamp With 1/4 Thread Holes, 3/8 ...
    Precio:  $5,261.00

    Smallrig 2220 Super Clamp With 1/4 Thread Holes, 3/8 ...

    -Titulo Original : SMALLRIG Super Clamp with 1/4’’ Thread Holes, 3/8’’ Locating Pin for ARRI Standard, T-Shaped Wingnut and Rubber Pads - 2220-Fabricante : SMALLRIG-Descripcion Original: 【VERSATILITY】The super clamp is designed to mount onto anything like cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps. It's up to your imagination & inventive ideas // 【T-SHAPED WINGNUT】The new design knob is designed to help you tighten the clamp comfortably and conveniently // 【FOR MORE ACCESSORIES】Made of aluminum alloy and stainless steel, sturdy and durable. The clamp features 1/4’’ threaded holes and 3/8’’ locating pin for ARRI standard, which allow you to attach more accessories // 【BETTER PROTECETION】The updated rubber pads on the clamp parts prevent your application from slipping and scratching // 【COMPATIBILITY】The jaw can be clamped on 10-50mm rods in diameter, fits your multiple needs // 1.Universal and ideal for use in many applications 2.Durable, robust and secure 3.Perfectly suitable for video-shooting via two types of mounting points 4.T-handle fits fingers well enhancing comfort Rods with a diameter of 10-55mm 1 X Super clamp 78X52X20 mm 99g Aluminum alloy + Stainless stee...
  • SMALLRIG 900 Pack x 2  Rod Connector with M12 Thread for ...
    Precio:  $1,443.00

    SMALLRIG 900 Pack x 2 Rod Connector with M12 Thread for ...

    -Titulo Original : SmallRig Rod Connector with M12 Thread for 15mm Aluminum Alloy Rods (Pack of 2) - 900-Fabricante : SmallRig-Descripcion Original: NEW 15mm rod connector, NEW Design, Much More Stable. // It allows you to connect any of our threaded 15mm rods together. All of our rods are threaded on 2 sides to allow extension via this Rod Connector 2 with M12(12mm)*1.75H7 thread. // Easy Connection. just simply screw it to one rod firtly, then please connect the second rod and it's done. // Notes: Only work with our Aluminium rods, not work with rods from other sellers, and not work with our Carbon Fiber Rods. // Material: aluminium alloy // It allows you to connect any of our threaded 15mm rods together. All of our rods are threaded on 2 sides to allow extension via this Rod Connector 2 with 12mm*1.75H7 thread. Easy Connection. just simply screw it to one rod firstly, then please connect the second rod and it's done. Note: not compatible with our Carbon Fiber Rods which have no inner thread. Only work with Smallrig Aluminum rods, not work with rods from other sellers, and not work with our Carbon Fiber Rods. aluminium alloy 2pcs Rod-Connector-...
  • Smallrig Placa De Montaje Y Contrapesos Dji Ronin Sc Gimbal
    Precio:  $5,528.00

    Smallrig Placa De Montaje Y Contrapesos Dji Ronin Sc Gimbal

    -Titulo Original : SMALLRIG Counterweight Mounting Plate for DJI Ronin SC Gimbal - BSS2420-Fabricante : Smallrig-Descripcion Original: No incluye Contrapesos Placa de montaje de contrapeso SmallRig para DJI Ronin-SC BSS2420 Características clave 1. Diseñado para DJI Ronin-SC Gimbal 2. Permite equilibrar configuraciones de cámara frontal y pesada 3. Filas de orificios roscados de 1/4 ”-20 para contrapesos. 4. Características de las escalas para posicionamiento preciso 5. Compatible con el soporte de lentes Ronin-S 6. Compatible con la abrazadera deslizante de la placa de cámara de liberación rápida original 7. Viene con almohadilla de goma para proteger la cámara Compatibilidad: Para DJI Ronin-SC El paquete incluye: 1 x placa 1 x llave hexagonal Dimensiones del producto: 125 x 85 x 12 mm Dimensiones del paquete: 135 x 100 x 50 mm Peso neto: 90g Peso del paquete: 139 g Material (s): aleación de aluminio 【PARA DJI RONIN-SC】 La placa de montaje de contrapeso está diseñada para DJI Ronin SC para reemplazar la placa de cola de milano original que viene con el cardán. Esta placa le permite equilibrar configuraciones de lentes largas montando contrapesos detrás de su cámara 【APLICACIÓN PRINCIPAL】 Contrarrestar las cargas pesadas frontales cuando conecta una cámara más grande o lentes más largas, la placa incorpora dos filas de hilos de 1/4 -20 para montaje opcional de contrapeso SMALLRIG AAW2459 (50 g), contrapeso 2284 (100 g) y contrapeso 2285 (200 g). (Tenga en cuenta que los contrapesos no están incluidos en el paquete) 【ESCALA PRECISA】 Las escalas milimétricas en los lados de la placa de montaje ayudan a garantizar una precisión posicionamiento. Además, la parte inferior de la placa presenta marcas de posición ligeras a pesadas y de la lente para facilitar el equilibrio de la cámara 【RECOMENDACIÓN SUPERIOR】 La parte frontal de la placa presenta un orificio roscado de 1/4 ”-20 en la parte delantera para adaptarse a la El soporte de lente original viene con el cardán. La placa de contrapeso también es compatible con la abrazadera deslizante de la placa de cámara de liberación rápida Ronin-SC que ayuda a recordar la posición cuando se reequilibra la cámara 【RECOMENDACIÓN SUPERIOR Front La parte frontal de la placa presenta un orificio roscado de 1/4 ”-20 en la parte frontal para adaptarse al soporte de lente original que viene con el cardán. La placa de contrapeso también es compatible con la abrazadera deslizante de la placa de cámara de liberación rápida Ronin-SC que ayuda a recordar la posición cuando se vuelve a equilibrar la cámar...
  • SMALLRIG 1898 Camera Extension Arm Connector 15mm Dual Ro...
    Precio:  $8,665.00

    SMALLRIG 1898 Camera Extension Arm Connector 15mm Dual Ro...

    -Titulo Original : SMALLRIG Camera Extension Arm Connector 15mm Dual Rod Clamp with Rosette (M6, 31.8mm) for Camera Shoulder Support -1898-Fabricante : SMALLRIG-Descripcion Original: Rosette adapters for ARRI standard on both sides, this 15mm compatible dual rod clamp can be mounted on standard 15mm rods and tighten down with two M5 knob screws // Allows you to attach and adjust rosette-mount handgrips on your shoulder rig // With the tilt angle at 15 degree, it can help you get a more comfortable shoulder handheld shooting experience by attaching rosette extension arm and handgrip with M6 thread // Add five 1/4’’-20 screw hold on the top, allows you to attach more accessories // Made of high-graded aluminum alloy and stainless steel, solid and durable // : 1. 15 degree tilt design for comfortable holding 2. Easy to lock with two thumbscrews underneath 3. Plenty of 1/4-20 thread holes for more accessories 4. CNC machined, solid and durable : Any 15mm rods : 1 x 15mm Rod Clamp with Rosette : 118x31.8x42mm : 120g : 120x100x40mm : 152g : Aluminum Alloy + Stainless Stee...
  • SMALLRIG 1112 15mm Rod Clamp Adapter to Field Monitor/EVF...
    Precio:  $2,906.00

    SMALLRIG 1112 15mm Rod Clamp Adapter to Field Monitor/EVF...

    -Titulo Original : SMALLRIG 15mm Rod Clamp Adapter to Field Monitor/EVF for DSLR Shoulder Rig - 1112-Fabricante : SMALLRIG-Descripcion Original: Compatible with standard 15mm rods, locked with the black wingnut // Wingnut for quick releasing and helping you tighten the clamp and re-position in narrow spots where you’re not able to fully turn them // Fits all monitors or EVFs with standard 1/4"-20 thread // This 1.5" rod can serve as 15mm quick release mount for adapting anything that requires a 1/4"-20 male or female connection // Made of aluminum alloy, sturdy and durable // The Rod Mount is a flexible connector that allows just about any item to be connected to 15mm rods. The RodMount includes a 1/4-20 female and male mounts to easily accommodate connections with On-camera monitors, Articulating Arms, and other accessories. The RodMount-4 makes you attach your field monitor or EVF to standard 15mm rod. Quick release or mount your monitor / EVF. Fits all monitors or EVFs with standard 1/4-20 thread. 1 X 90 degree 15mm Rod clamp1 X 1.5 15mm quick release mount Metal: aluminium allo...
  • Smallrig 2262 Quick Release Half Cage For Nikon Z6 And Z7..
    Precio:  $16,485.00

    Smallrig 2262 Quick Release Half Cage For Nikon Z6 And Z7..

    -Titulo Original : SMALLRIG Quick Release Half Cage for Nikon Z6 and Z7 2262-Fabricante : SMALLRIG-Descripcion Original: ...
Mostrar del 1 al 24 (de 366 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]