Arriba

Accesorios para Cámaras > Soportes y Estabilizadores > Estabilizadores para Cámaras

Mostrar: 
Mostrar del 1 al 24 (de 347 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • SMALLRIG 1870 Rosette Extension Arm Dogbone with Length A...
    Precio:  $11,582.00

    SMALLRIG 1870 Rosette Extension Arm Dogbone with Length A...

    -Titulo Original : SMALLRIG Rosette Extension Arm Dogbone with Length Adjustable, M6 Rosette 31.8mm - 1870-Fabricante : SMALLRIG-Descripcion Original: SmallRig Extension Arm with Rosette 1870 is an adjustable rosette arm with NATO rail device. It could be used on both sides. // It is equipped with standard rosettes (M6, 31.8 mm diameter) on opposite ends. It provides 167mm-255mm of extension for ARRI standard rosette handgrips and other gear // With a NATO rail in the middle, which allows to adjust the distance forwards and backwards just through quickly tightening and loosening the M5 thumbscrew // We also considerately provide a M3 thread to prevent the NATO rail from accidental removal. There comes with many 1/4" & 3/8" thread holes allowing for additional rigs attachment // This extension arm can be modulated at ease to relocate your handle for remote control. //...
  • Smallrig 1968 Camera A6500 Cage Kit For Sony Alpha 6500 A...
    Precio:  $12,594.00

    Smallrig 1968 Camera A6500 Cage Kit For Sony Alpha 6500 A...

    -Titulo Original : SMALLRIG Camera A6500 Cage Kit for Sony Alpha 6500 A6500 Camera-Fabricante : SMALLRIG-Descripcion Original: SmallRig Camera Accessory Cage Kit 1968 is a professional camera support package designed for Sony A6500 camera, which includes form-fitting a6500 cage, a top handle and a HDMI cable clamp. With the camera in the cage, you still have access to the SD card slot, battery compartment, and all camera controls. // Built-in nato rail and cold shoe: The cage is equipped with quick release NATO rails, cold shoe and threaded holes for accessory attachment. For additional cold shoe, please go for “SmallRig 1241”. // The cage features a quick release plate for Arca Swiss standard at the bottom with an array of 1/4’’ threaded holes compatible with quick release plates of different standards. The base is compatible with our riser system 1934 (not included). // The Locating point for arri standard could attach Magic Arm 2026 for monitor. The cage could be attached with wood handle 1970 (not included) // Top handle 1638 attaches to the top for convenient handheld shooting. In addition, HDMI cable clamp 1822 protects the HDMI cable without obstructing USB port or other ports. //...
  • Cage Para Sony Alpha A6600/a6500 1/4-20 Adapter Hole
    Precio:  $6,476.00

    Cage Para Sony Alpha A6600/a6500 1/4-20 Adapter Hole

    -Titulo Original : CAMVATE Camera Cage for Sony Alpha A6600/A6500 with Conversion 1/4-20 Adapter Hole(Black) -Fabricante : CAMVATE -Descripcion Original: Specification: Models: 45N1096 Voltage: 3.7V Capacity: 30Wh/8120mAh 4-Cells Battery Type: Li-ion Battery Condition: Brand New Replacement Part number: 45N1096 45N1097 45N1721 45N1099 1ICP5/44/97-4 Compatible with machines model: Lenovo ThinkPad Tablet 2 10.1 - Type 3679 3682 Tablet Series...
  • SMALLRIG 828 Pack x 2 1/4 to 1/4 Male Threaded Screw Adap...
    Precio:  $1,333.00

    SMALLRIG 828 Pack x 2 1/4 to 1/4 Male Threaded Screw Adap...

    -Titulo Original : SMALLRIG 1/4 to 1/4 Male Threaded Screw Adapter Double Head Stud for Camera Cage Monitor LED Microphone, Pack of 2-828-Fabricante : SMALLRIG-Descripcion Original: Double head 1/4" male screw: Since both ends are 1/4" male screw, it could be used on most accessories via the 1/4"-20 thread. // There are various usages to correspond to a wide range of equipment. Use it when installing a tripod, a monopod or a panhead. It is convenient for shooting. // Made of high quality stainless steel, it is light weight and durable. And it could support plenty of equipments. // Because it is easy to install and remove, it is recommended for those who frequently reconfigure equipment. Regardless of professional or amateur, it is the optimum equipment for photographers/movie makers. // Size: Length: 20mm, approx. Diameter: 16mm.【※Please note that the screws are with SmallRig LOGO on them】 // Size:  |  Color: 1. It is a kit of standard 1/4 - 1/4 male thumb screws with a double head stud for universal use. 2. It features its light weight and durability. 3. It could be attached and detached from other camera rigs very quickly and conveniently. 4. It could be mounted on camera cage, monitor, action camera, led lights, tripod heads, mic clamp, extension rods, tripod head plates, wireless audio receivers, shoulder rig, and so on, for extra flexibility of add-ons. Accessory with 1/4’’ threaded holes 1 x Rod Clamp with 1/4 Double End Stud 828 Stainless Stee...
  • SMALLRIG 838 D Shaft D-ring 1/4 Inch Thead Camera Screw f...
    Precio:  $1,029.00

    SMALLRIG 838 D Shaft D-ring 1/4 Inch Thead Camera Screw f...

    -Titulo Original : SmallRig D Shaft D-ring 1/4 Inch Thead Camera Screw for DSLR Camera Rig - 838-Fabricante : SmallRig-Descripcion Original: 2 PACK Precision made 1/4"-20 thread Stainless Steel (metal) Tripod screws. // Total length including base: 14.5mm. // Total shaft length: 10.5mm. // Threaded part of the shaft: 6mm,No thread part of shaft: 4.5mm. // approx.Head diameter(including D-Ring ): 16.2mm //...
  • Smallrig 2112 EVA1 Top Plate for Panasonic EVA1-2112...
    Precio:  $14,489.00

    Smallrig 2112 EVA1 Top Plate for Panasonic EVA1-2112...

    -Titulo Original : SmallRig EVA1 Top Plate for Panasonic EVA1-2112-Fabricante : SMALLRIG-Descripcion Original: SmallRig Top Plate 2112 is designed for Panasonic EVA1. It attaches by 4 1/4”-20 screws. It allows to mount the SmallRig Rod Clamp 2001 and 15mm rod for battery plate. The front of the plate allows to attach a dual rod clamp and 15mm rod for follow focus or relocating the original LCD mount. Compatibility: Panasonic EVA-1 Camera Product Dimensions: 114.5 X 87.4 X 14mm Net Weight: 199g Material(s): Aluminum Alloy 1 x Top Plate 2112 4 x 1/4” Screws 1 x Hex Spanne...
  • Neewer estabilizador  Canon 5D
    Precio:  $8,509.00

    Neewer estabilizador Canon 5D

    -Titulo Original : Neewer Foldable DSLR Rig Movie Kit Film Making System Shoulder Rig Mount / Shoulder Support Pad for Digital SLR Camera and Camcorder / such as Canon 5D Mark II III 1D 7D 60D 700D 650D 600D 550D Rebel T5i T4i T3i T2i Nikon D4 D800 D700 D300 D90 D5000 D7000-Fabricante : Neewer-Descripcion Original: You can lift up or put your equipment on shoulders with Shoulder Mount // The specially designed make cameramen easy for shooting // More effects,flexible portfolio, easy to use, easy to carry // With a variety of interfaces to connect video light, LCD monitor screen, supporting frames and other equipment // Color: Shooting is more steady with body mechanics, The DSLR Rig Movie Kit can be used for many hours a day without any fatigue or stress. It completely eliminates back neck and arms stress. It can extend your camera to any angle in any direction. Whether overhead, high angel or low angle shot, it allows you to use imagination to your own needs. Being the best DSLR stabilization system! You can mount 7.0 or 11.0 arm onto it and then mount lighting or Monitor to use with your DV and DSLR camera. (7, 11 arm, LED light, DV/Camera in photos are not included) Every joint is rotatable and adjustable,portable.Small size that is good for carrying. Extend the rear arm for shoulder support Adjust to use as one hand DV/Camera set,it can suit the way you needed. Canon 5D Mark II/1D/7D/550D/60D/T2i/600D ... Nikon D4/D800/D700/D300/D90/D5000/D7000/D3100... Panasonic AG-HMC153MC GH-1 GH-2 GF-1 GF-2 ... Sony DSR-PD198P NEX-3 NEX-5 ... For any other DSLR Cameras and Camcorders Double-handle allows shooting more stabilization Small foldable design that you can carry it around easily Transformable design for different shooting style Extendable rear arm A lot of 1/4 screws for LCD monitor, Light, Mic or other accessories mounting All hand grips and joint are rotatable and adjustable Non-slip rest pad on all hand grips Weight: 53.5 oz/1.5kg Package size : 12.2x9.4x3.7/31x24x9.5cm(Folded) 1x DSLR Rig Shoulder Mount Kit 1x Hex Driver...
  • SMALLRIG 1784 Universal Lens Support with 15mm LWS Rod Cl...
    Precio:  $4,065.00

    SMALLRIG 1784 Universal Lens Support with 15mm LWS Rod Cl...

    -Titulo Original : SMALLRIG Universal Lens Support with 15mm LWS Rod Clamp for Diameter 50mm to 140mm Lens - 1784-Fabricante : SMALLRIG-Descripcion Original: SMALLRIG Universal Lens Support with 15mm LWS Rod Clamp 1784 mounts on standard LWS-spaced 15mm rods and is designed to take much of the weight of heavier lens off the camera's lens mount. // SMALLRIG Universal Lens Support provides physical support for long lens, thus relieving the potentially damaging pressure on the camera's lens mount. // When connected to a cinema lens's support foot or a still photo lens's tripod collar, the lens support removes the weight stress from the camera's lens mount. // Composed of lightweight aluminum, the lens support has a vertically adjustable bracket so it can accommodate 50-140mm lens diameters. // The rod clamp part is compatible with any standard 15mm LWS rig. //...
  • Smallrig 2243 Camera Cage For Nikon Z6/ Z7 Camera With Bu..
    Precio:  $17,415.00

    Smallrig 2243 Camera Cage For Nikon Z6/ Z7 Camera With Bu..

    -Titulo Original : SMALLRIG Camera Cage for Nikon Z6/ Z7 Camera with Built-in NATO Rail and Cold Shoe 2243-Fabricante : SMALLRIG-Descripcion Original: ...
  • SMALLRIG 2046 Quick Release Rosette Mount Adapter to NATO...
    Precio:  $7,690.00

    SMALLRIG 2046 Quick Release Rosette Mount Adapter to NATO...

    -Titulo Original : SMALLRIG Quick Release Rosette Mount Adapter to NATO Clamp for Rosette Handle Grip for Arri Standard, DIY Camera Rig - 2046-Fabricante : SMALLRIG-Descripcion Original: Rosette clamp 2046 comes with a NATO clamp and an rosette. NATO clamp is compatible with NATO rail for convenient attachment and detachment, and it could be locked tight via a locking lever. M6 threaded holes could be mounted on rosette with M6 screw // The rosette could be mounted on Wooden Handle 1891/1941 and then attach on the NATO rail of Cage 2049/1889 for quick release. // It features its strong compatibility and is applicable in many scenarios. It could attach NATO Rail 1409 on the cage via NATO clamp on the one end and attach Rosette Handle 1810 via the rosette on the other end for handheld shooting. // It could attach NATO Rail 1409 on the cage via NATO clamp on the one end and attach Rosette Handle 1810 via the rosette on the other end for handheld shooting. // It could attach NATO rail on the side of cage on the one end and attach Wooden Handle 1941 for handheld shooting on the other end. It could attach NATO rail on the side of cage on the one end and attach NATO Rail with Rosette 1884 and then EVF support for monitor. // enables to bring out the maximum potential during shooting and it offers lots of possibilities for extension as per your needs. It could be used in many scenarios and it is quite convenient for the cameraman. 1. It is compatible with NATO rail for convenient attachment and detachment, and it could be locked tight via a locking lever. 2. It could attach NATO Rail 1409 on the cage via NATO clamp on the one end and attach Rosette Handle 1810 via the rosette on the other end for handheld shooting. 3. It could attach NATO rail on the side of cage on the one end and attach Wooden Handle 1941 for handheld shooting on the other end. 4. It could attach NATO rail on the side of cage on the one end and attach NATO Rail with Rosette 1884 and then EVF support for monitor. Universal 1 x NATO Clamp to Rosette 2046 36x32x18 mm 36gv 63x50x40mm Aluminum Allo...
  • Smallrig 2071 Articulating Magic Arm with 1/4 Thread Scre...
    Precio:  $11,379.00

    Smallrig 2071 Articulating Magic Arm with 1/4 Thread Scre...

    -Titulo Original : SMALLRIG Articulating Magic Arm with 1/4 Thread Screw Ballhead and NATO Clamp Ballhead, Monitor Mount for Field Monitor, Lights, Audio Recorders, DIY Camera Rig - 2071-Fabricante : SMALLRIG-Descripcion Original: ▶ NATO Clamp Ballhead: Attach cage with NATO rail with on the other end via ballhead with NATO clamp, while it could attach monitor cage on the other end via ballhead with 1/4’’ screw // ▶ Quick Release & Adjust Angle: It features quick release and attachment and could be slid to get the balance of the whole kit.The monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp // ▶ Precision locking device: A single wingnut is applied to lock the double ballhead tight directly, and thumb screws on both ends are utilized to lock the devices manually and a spared hex spanner is ready to lock it tighter // ▶ Extensive compatibility: The ballhead with 1/4" screw thread can not only be connected to monitors, camera cages (such as gh5 cage rigs SMALLRIG 2049, SMALLRIG 2050, SMALLRIG 2051, SMALLRIG 2052), but also can be attached to monitor cages with NATO rail, such as Blackmagic Cage(5") SMALLRIG 1726, SMALLRIG 2008,SMALLRIG Cage for Ninja Assassin 1788, SMALLRIG SmallHD Cage 1834 or other products with nato rail // ▶ Hassle-Free Warranty: At SMALLRIG, not only we offer high quality products,we back them up with 18-month warranty and a 30-day money back guaranty //...
  • Bracket Holder Para Camara Nikon Z6 Z7 L Hand Grip
    Precio:  $5,878.00

    Bracket Holder Para Camara Nikon Z6 Z7 L Hand Grip

    -Titulo Original : Z6 Z7 Vertical Shoot Hand Grip QR Quick Release Z6 Z7 L Plate Camera Bracket Holder for Nikon Z6 Z7 -Fabricante : FUGASUN-Descripcion Original: PREMIUM QUALITY - Specially compatible with Sony Xperia 10. Made of premium PU leather material outside, ultra thin and ultra slim case, small and highly soft clear TPU case, a good anti-scratch protective function prevent your phone shell from scratching fully. // MULTIFUNCTION - A flip wallet design with 1 card slot for carrying your credit card, ID card, debit card or something else. It is not only a soft phone case and also a wallet for your convenience. // ADJUSTABLE ANGLE - Built in stand bring you different viewing angles for hands-free movie-watching or video-chatting, you can find the most suitable hands-free viewing experience. This simple and generous style slim case also highlights your elegant personality better. // PERFECT DESIGN - It was cuted out by a precision mold, which preserve full use of volume buttons, charger, camera, microphone, speakers, charging ports, audio ports and all other ports. And It is easy to install and take off. // 360°PROTECTION - This full body protection case with anti-slip texture surface surrounding all the edges let you hold your phone more tightly and safely. And it is not just a bumper guard for the sides or back, it is 360 degree protection, slight but can protect your cell phone from bunping and shocking. [ENCLUSURE JUST LITTLE MAGNETIC SUCTION] // Color:  |  Size: This slim elegant case is designed specially for Sony Xperia 10 Features MULTI-FUNCTION: A card slot for credit cards, ID cards ADJUSTABLE ANGLE: You can adjust the angle randomly while watching movie SOFT MATERIAL: Environmental protection material cover is made with PU leather and soft TPU inner clear case PERFECT FIT: Cuted out by a precision mold, Fit for your phone perfectly, Easy to install and take off MAGNETIC SUCTION: The magnetic suction design protect the full body of your phone very well and keep you phone charming and slim JUST A LITTLE Magnetic Suction, If you mind, Please be careful purchase Please Note This wallet case is ONLY for Sony Xperia 10, Please check your phone model Service and Warranty If there are any non-artificial product issues about our cases, please contact us immediately. We will send you another new case FREE or refund completely Please rest assured that Any problem or question, we will resolve for you asap. We are at your service always...
  • Smallrig 2061 15mm Railblock Rod Clamp With 1/4-20 X 2
    Precio:  $3,164.00

    Smallrig 2061 15mm Railblock Rod Clamp With 1/4-20 X 2

    -Titulo Original : SMALLRIG 15mm Railblock Rod Clamp with 1/4-20 Thread for Red and Other 15mm DSLR Camera Rig - 2061-Fabricante : SMALLRIG-Descripcion Original: SmallRig Super Lightweight 15mm-Railblock 2061 includes 2pcs of super lightweight 15mm-Railblock. // Each Super Lightweight 15mm-Railblock-3 comes with two rod clamps for 15mm rods, which could be tightened via 2 rotatable wingnuts. // The adjustment of one wingnut will not affect the operation of the other wingnut. // In addition, it is equipped with an abundance of 1/4’’ threaded holes for DIY operations. // Size: 15mm Rod2 x15mm-Railblock-3 4 x 1/4''Screw(short)4 x 1/4''Screw(long)2 x Hex Spanner 110x10x42 mm 80g 120x100x40mmAluminum Allo...
  • SMALLRIG Pack x 4 M12 Rod End Protective Cap Stopper Scre...
    Precio:  $2,087.00

    SMALLRIG Pack x 4 M12 Rod End Protective Cap Stopper Scre...

    -Titulo Original : SmallRig M12 Rod End Protective Cap Stopper Screw for 15mm Rod Support Dslr Rig Rail Clamp (4pcs Pack)-Fabricante : SmallRig-Descripcion Original: The rod cap 1617 is used for M12 threaded rod on the end, helping protect the equipment from accidentally sliding off from your rods. // M12(12mm) threaded: the end cap features a M12 thread screw on the end, which is only compatible with M12 threaded rod on the end. // Rubber Ring: the rubber ring for each rod cap to ensure the connecting of rod and rod cap more firmly. // The rod cap is made of high-quality aluminium alloy and rubber, light but stable when using. // Package included: 4 x rod cap(M12); Net Weight: 40g // The M12 Rod End / Protective Cap / Stopper Screw used to protect your rod thread from damage, Protect your rod clamp / rail block from slipping out.Made of aluminum with anodized coating and sand blasting finish. 18mm 17mm 12mm 4 x M12 Rod End / Protective Ca...
  • Smallrig 1950 G85/G80 Cage with Built-in Cold Shoe and NA...
    Precio:  $15,501.00

    Smallrig 1950 G85/G80 Cage with Built-in Cold Shoe and NA...

    -Titulo Original : SmallRig G85/G80 Cage with Built-in Cold Shoe and NATO Rail for Panasonic Lumix DMC-G85/G80-1950-Fabricante : SMALLRIG-Descripcion Original: It's a specially designed cage for Panasonic Lumix DMC-G85/G80, the body of the cage comes with many 1/4" and 3/8" mounting holes for more accessories // Strengthening protection and stability and providing accessory mounting options, this cage helps your Panasonic G85/G80 camera for video production // With the camera in the cage, you still have access to the SD card slot, battery compartment, and all camera controls, so you won't have to waste time removing the camera from the cage during a shoot // Two built-in cold shoes mount on the top for attaching small and light accessories, such as microphone, monitor mountings, etc. So you can attach a microphone bracket ( SmallRig 1859 ) via the cold shoe; NATO rails on the top and at the side ensure the access to mount NATO handles, EVF mount and other NATO compatible rigs, so you can use our NATO grip ( SmallRig 1955, SmallRig 1995, SmallRig 2027 )on this cage by the nato rail on the top side // This cage leaves enough space to mount HDMI cable clamp 1822 to protect the camera HDMI port //...
  • Neewer Aluminium Alloy 24 inches/60 centimeters Handheld...
    Precio:  $13,560.00

    Neewer Aluminium Alloy 24 inches/60 centimeters Handheld...

    -Titulo Original : Neewer Aluminium Alloy 24 inches/60 centimeters Handheld Stabilizer with 1/4 3/8 inch Screw Quick Shoe Plate for Canon Nikon Sony Other DSLR Camera Video DV up to 6.6 pounds/3 kilograms(Black)-Fabricante : Neewer-Descripcion Original: Allows high and low angle shooting, high precision bearings and low friction joints. // Stretch adjustment improves weight ratio, and reduces the clump weights greatly. // The Quick Release Plate can accept any camera with 1/4" and 3/8". // It can be extended from 15.2" to 24" to adapt to the weight of the camera. // Capacity Range: Approx. 1.1-6.0lbs/0.5-2.7kg // Color: The Neewer 60cm Handheld Stabilizer is a lightweight stabilizing system created for DSLR cameras weighing up to 6lbs. This compact handheld system takes away the need for tripods or dolly's, giving videographers the ability to create smooth videos while the camera is in motion. It features a camera platform with both x and y adjustments, and multiple mount holes for various camera positions. The weight plate contains six weight discs to balance your camera on the stabilizer. These can be added or removed based on your need. The weights are fastened on the weight plate with 1/4 screw. This system is especially good for video cameras, video capable DSLR cameras and DVs. Allows high and low angle shooting, high precision bearings and low friction joints. Stretch adjustment improves weight ratio, and reduces the clump weights greatly. The Quick Release Plate can accept any camera with 1/4 and 3/8. The quick release plate with mark can record the dynamic balance for different equipments. Bidirectional base plate with fine adjustment system can be adjusted freely to any direction. It can be extended from 15.2 to 24 to adapt to the weight of the camera. Aluminum construction with black powder coating. Comfortable handle. Maximum Length: Approx. 24/60cm Minimum Length: Approx. 15.2/38.6cm Quick Release Plate Scale: 1.96/50mm (Either side) Capacity Range: Approx. 1.1-6.0lbs/0.5-2.7kg 1x Stabilizer 1x Carry Bag...
  • SMALLRIG 1856 Rail Rod Clamp Double Sided NATO Rail with ...
    Precio:  $7,543.00

    SMALLRIG 1856 Rail Rod Clamp Double Sided NATO Rail with ...

    -Titulo Original : SMALLRIG Rail Rod Clamp Double Sided NATO Rail with Single 15mm Rod Clamp, 1/4 Threaded Holes - 1856-Fabricante : SMALLRIG-Descripcion Original: The rod clamp can mount onto 15mm standard rod, allows for attaching EVF mount // The dual sided nato rail allows to quick attach or detach accessories with NATO clamp // The rail features 1/4’’ threaded holes for attaching more accessories // Made of aluminum alloy, sturdy and durable // Multifunctional and lightweight, only weighs 79g // : 1.Multi-functional and lightweight 2.EVF mount attachment 3.Double side NATO rail 4.Safety pins device 5.1/4 -20 thread holes : Any 15mm rod : 1x NATO Rail with 15mm Rod Clamp 1x M5 wingnut : 147x22x13mm : 65g : 135x23x160mm : 79g : Aluminum Allo...
  • Smallrig 1779 Camera Cage For Panasonic Lumix G7 With Hdm..
    Precio:  $13,532.00

    Smallrig 1779 Camera Cage For Panasonic Lumix G7 With Hdm..

    -Titulo Original : SMALLRIG Camera Cage for Panasonic Lumix G7 with HDMI Cable Clamp - 1779-Fabricante : SMALLRIG-Descripcion Original: SmallRig Cage for Panasonic G7 Formfitting 1779 is a specialized cage for Panasonic Lumix DMC-G7. // There are two cold shoes placed on each side, and an external NATO on the left side, you can add a SmallRig EVF Mount or other small accessories on it. Also you can add a HDMI cable clamp on the other side as long as you need // A formfitting cage that adds 1/4"-20 and 3/8"-16 mounting threads on all sides of the camera for easy attachment of a tripod plate, accessories, or creative camera rigging. // The specialized cage for G7 is light and solid, it will fit your G7 camera perfectly. // It wraps securely around the camera body, prevent unwanted rotation. //...
  • Smallrig 1498 Articulating Rosette Arm Max 11 Long With C...
    Precio:  $4,213.00

    Smallrig 1498 Articulating Rosette Arm Max 11 Long With C...

    -Titulo Original : SMALLRIG Articulating Rosette Arm Max 11 Long with Cold Shoe Mount & Standard 1/4-20 Threaded Screw Adapter - 1498-Fabricante : SMALLRIG-Descripcion Original: Durable construction with a locking control knob to release or engage the tension, this articulating arm simplifies the mounting, placement and adjusting any on-camera lighting and other accessories. // Stainless steel Rosette joint, much stronger and more stable. // Stainless steel ends // Max 10 Inches Long // Maximum load capacity: 3kg; Best weight load 1.5-2 kg. // Size: Durable construction with a locking control knob to release or engage the tension, this articulating arm simplifies the mounting, placement and adjusting any on-camera lighting and other accessories. 1. Stainless steel Rosette joint, much stronger and more stable. 2. Stainless steel end...
  • Double Ballhead Ball Arm Camera Clamp Mount Monitor Mount B
    Precio:  $2,796.00

    Double Ballhead Ball Arm Camera Clamp Mount Monitor Mount B

    -Titulo Original : Double Ballhead Ball Arm Camera Clamp Mount Monitor Mount Bracket with Super Clamp for Ronin M Ronin MX Freefly MOVI -Fabricante : Anwenk-Descripcion Original: This is a multi-function double ball head with bottom super clamp and 1/4 tripod threaded screw to mount Monitors and Led Lights to DSLR. Comes with a double ball munt with 360 degree swivel Articulation for easy direction. Single locking knob for quick and safe locking.Standard 1/4-20 tripod screw on top to mount video monitors and small led lights. Comes with solid mini super clamp with Max open(approx) 2.16inches,It holds tight and can mount virtually everywhere you need like 15mm rods, hooks, shelves, plate glass,cross bars.With 1/4-20 and 3/8-16 thread for setting up other configurations. Made of solid aircraft aluminum. Package includes 1x double ball head mount,1x mini super clamp....
  • SMALLRIG 2002 Rosette Handle Kit with Rosette Extension A...
    Precio:  $47,885.00

    SMALLRIG 2002 Rosette Handle Kit with Rosette Extension A...

    -Titulo Original : SMALLRIG Rosette Handle Kit with Rosette Extension Arm for Camera Shoulder Rig Support - 2002-Fabricante : SMALLRIG-Descripcion Original: 【CAMERA SHOULDER RIG】The camera shoulder rig is an assembly of SMALLRIG Rubber Handle 1963, Extension Arm 1684 and Rosette Bracket 1898 // 【STABILIZE SHOOTING】The shoulder rig support comes with two handles with rubbers, improve your hand-held shooting and eliminate jitters while you are taking a still video and RUN&GUN shooting // 【COMPACT DESIGN】Updated Rosettes for tighter installation. Made of aluminum alloy, durable and sturdy build, fix firmly and securely // 【15mm ROD ClAMP】Features a 15mm rod clamp to attach 15mm rods for shoulder shooting. You can quick release and attach rods via the black wingnut // 【360 DEGREES ADJUSTABLE】With the rosette extension arm on each side, the handle could be rotated 360°to position you want //...
  • Smallrig 805 15mm Single Rod Clamp With Hot Shoe Mount Mi...
    Precio:  $2,897.00

    Smallrig 805 15mm Single Rod Clamp With Hot Shoe Mount Mi...

    -Titulo Original : SMALLRIG 15mm Single Rod Clamp with Hot Shoe Mount Micro Ball Head for LCD Monitors - 805-Fabricante : SMALLRIG-Descripcion Original: The rod clamp kit can be used to work with single 15mm rod and accessories with 1/4’’-20 thread, such as monitor and phone mount, etc // The ballhead is 360 degree adjustable that allows you to secure at any angle as per your need // The rod clamp comes with a cold shoe mount or you can remove it to attach other accessories // The wingnut is made to help you secure the rod clamp and the ballhead quickly and tightly // Made of aluminum alloy, sturdy and durable // 15mm Single Rod Clamp & Micro Ball Head for LCD Monitors Includes One Hot shoe mount & One Single Rod Clamp w/ 2 threaded holes...
  • Smallrig 1872 15mm Carbon Fiber Rods (6 Inch) for 15mm Ra...
    Precio:  $2,842.00

    Smallrig 1872 15mm Carbon Fiber Rods (6 Inch) for 15mm Ra...

    -Titulo Original : SMALLRIG 15mm Carbon Fiber Rods (6 Inch) for 15mm Rail Support System- 1872-Fabricante : SMALLRIG-Descripcion Original: Lightweight: SMALLRIG 15mm Carbon Fiber Rod (6", pair) 1872 is a pair of rigid, durable while lightweight rods that won't weigh down your camera support rig // Highly Rigid and Durable: This pair of rods are 150mm long machined from hollow carbon fiber tubes.Highly Rigid,durable and corrosion resistant // Attach 15mm Support System: It is precision crafted for 15mm support systems, you can attach a wide variety of available accessories, such as follow focus, matteboxes and much more // Related Product: If you have other demands, please have a look at 15mm carbon fiber rod 8 inch 870 and 15mm carbon fiber rod 12 inch 851 // Hassle-Free Warranty: At SMALLRIG, not only we offer high quality products, we back them up with 18-month warranty and a 30-day money back guaranty // A professional company specializing in camera accessories. A comprehensive enterprise integrating product design, research and development, sales and maintenance of camera accessories. Products are sold in the United States, China, Germany, France, Japan, Canada, Australia and other countries. We take high-quality products as the core and excellent customer service as our tenet. is a pair of rigid, durable while lightweight rods that won't weigh down your camera support rig. This pair of rods are 150mm long machined from hollow carbon fiber tubes. It is precision crafted for 15mm support systems, you can attach a wide variety of available accessories, such as follow focus, matteboxes and much more. If you have other demands, please have a look at 15mm carbon fiber rod 8 inch 870 and 15mm carbon fiber rod 12 inch 851.√ Lightweight√ Highly Rigid and Durable√ Corrosion Resistant15mm support system Product Dimensions: 150x15x15mmNet Weight: 35gPackage Dimensions: 160x35x25mmPackage Weight: 51gMaterial: Carbon fiber2 x Carbon fiber rodAt SMALLRIG, not only we offer high quality products, we back them up with 18-month warranty and a 30-day money back guarant...
  • Neewer 59 inches/150 Centimeters Detachable Photography...
    Precio:  $6,779.00

    Neewer 59 inches/150 Centimeters Detachable Photography...

    -Titulo Original : Neewer 59 inches/150 Centimeters Detachable Photography Lighting Umbrella - White Convertible Umbrella with Removable Black Cover and Reflective Silver Backing-Fabricante : Neewer-Descripcion Original: Double layers, white translucent inside, Black/Silver outside // Industrial standard, suitable for studio flashes and umbrella holder brackets // Easy to assemble/disassemble, compact and easy to carry // Backing may be removed half way, providing a unique combination of light bounced from different surfaces // This umbrella softens and spreads light and offers a very natural and pleasing effect onto your subject. NOTE: The flash and light stand are NOT included // Size: NOTE: The flash and light stand are NOT included Descriptions: Double layers, white translucent inside, Black/Silver outside Industrial standard, suitable for studio flashes and umbrella holder brackets Easy to assemble/disassemble, compact and easy to carry Backing may be removed half way, providing a unique combination of light bounced from different surfaces Black for protecting extra light from being reflected into your photos White for producing neutral color and soften the harsh light This umbrella softens and spreads light and offers a very natural and pleasing effect onto your subject. Package Content: 1 x Double Decked Detachable Lighting Umbrell...
Mostrar del 1 al 24 (de 347 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]