Arriba

Herramientas > Eléctricas y Neumáticas > Engrapadoras y Clavadoras

Mostrar: 
Mostrar del 1 al 24 (de 69 productos)
Páginas de Resultados:  1  2  3  [Siguiente >>] 
  • Clavadora Neumatica : Fasco 11719F Pneumatic Bradder
    Precio:  $67,179.00

    Clavadora Neumatica : Fasco 11719F Pneumatic Bradder

    -Titulo Original : Fasco 11719F Pneumatic Bradder-Fabricante : Fasco-Descripcion Original: Rubber comfort grip ensures non-slip handling and reduces vibrations and fatigue // Precise countersinking due to depth of drive regulation // Nose protection avoids marking of soft wood // Quick release nose for easy unjamming // Use with 16-gauge straight Brad // This nailer has a switch trigger for sequential and contact actuation. It features a slim nose for good visibility and precision...
  • Clavadora Neumatica : BOSTITCH BTFP12569 2-in-1 Flooring...
    Precio:  $78,329.00

    Clavadora Neumatica : BOSTITCH BTFP12569 2-in-1 Flooring...

    -Titulo Original : BOSTITCH BTFP12569 2-in-1 Flooring Tool-Fabricante : Bostitch-Descripcion Original: DRIVES: 15.5 GA flooring staples or 16 GA "L" shaped flooring cleats from 1-1/2" to 2" length. // Has pneumatic driving action. Used in hardwood and engineered flooring // NON-MARRING BASE PLATES: For 1/2" (12.7 mm) through 3/4" (19.1 mm) flooring. // ERGONOMIC DESIGN: Has long handle with a comfortable rubber grip. // INCLUDES: Nailer, Interchangeable Base Plates, Mallet, Wrenches and 1/4" (6.4 mm) Air Fitting with Dust Cover. // The BOSTITCH BTFP12569 2-in-1 Flooring Tool drives 15.5ga staples and 16ga cleat nails from 1-1/2 to 2 length. It features mallet actuated pneumatic driving action, along with non-marring, interchangeable base plates. This tool is ergonomically designed with longer handle and comfortable rubber grip and is lightweight at 10.85 lbs. Low air requirements at 3.7 SCFM. Designed for hardwood and engineered flooring installation, which helps eliminate gaps between flooring boards. For 1/2 (12.7 mm) through 3/4 (19.1 mm) flooring, ready to use out of box. Includes Tool, Mallet, Oil, Wrenches, 1/4 (6.4 mm) air fitting...
  • Clavadora Neumatica : B&C Eagle CN65SP 15 Degree 1-1/4-Inch.
    Precio:  $96,809.00

    Clavadora Neumatica : B&C Eagle CN65SP 15 Degree 1-1/4-Inch.

    -Titulo Original : B&C Eagle CN65SP 15 Degree 1-1/4-Inch to 2-1/2-Inch Coil Siding Nailer-Fabricante : B & C Eagle-Descripcion Original: No-Mar tip // Adjustable exhaust deflector (tool free 360 Degree) // Weight: 4.8lbs // Lightweight magnesium housing // Comfortable rubber grip // From the Manufacturer The B&C Eagle CN65SP Coil siding nailer has a light and rugged magnesium housing with a soft rubber grip designed to meet the needs of any job in any climate. This tool is compatible with both wire collated and plastic collated coil nails. The CN65SP magazine has a capacity to hold up to 400 wire collated coil nails or up to 200 plastic band collated nails in lengths ranging from 1-1/4-Inches to 2-1/2-Inches. A 360 degree directional cap gives you the freedom to direct the flow of the exhaust away from your face while working. The built-in trigger selection allows you to choose quickly and easily between single fire and bump fire nailing. Other convenient features of the CN65SP include a tool free adjustable depth of drive, belt hook, and no-mar tip to avoid mars on the material surface. Works with wire weld and plastic band 15 degree coil nails 1-1/4-Inch to 2-1/2-Inches in length and 0.083 to 0.113 inches in shank diameter. Look for B&C Eagle (Black label) 15 degree mini coil nails...
  • Clavadora Neumatica : Freeman PMPN Mini-Palm Nailer...
    Precio:  $9,919.00

    Clavadora Neumatica : Freeman PMPN Mini-Palm Nailer...

    -Titulo Original : Freeman PMPN Mini-Palm Nailer Ergonomic & Lightweight Pneumatic Nail Gun for Tight & Hard To Reach Spaces-Fabricante : Freeman Pneumatics-Descripcion Original: NAILED IT: The Freeman mini-palm nailer is a small but powerful hammer to assist you when working in tight spaces & hard to reach areas. It's lightweight with an ergonomically designed body & can handle nails from 6d to 16d & up to 3 1/2 inches in length // PRO DESIGN: This powerful and durable palm nailer features high quality internal parts and lightweight, ergonomic design, weighing in at under two pounds. It comes with everything you need to hammer in hard to reach places, with oil and wrenches included // THE RIGHT TOOL FOR THE JOB: We're committed to providing outstanding value, top tier customer service and long-lasting, high-quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between. // QUALITY & DURABILITY: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warranted in the USA // TOUGH & DEPENDABLE: We make an array of durable construction tools and accessories, including staplers & nailers for siding, flooring, framing, finish, & roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode & Dewalt. // Product description PMPN Features: -Mini palm nailer. -Light weight. -Ergonomically designed body. -Air filter. Type of Nailer: -Palm Nailers. Generic Dimensions: -2.75'' H x 4.38'' W x 5.13'' D. Dimensions: Overall Height - Top to Bottom: -2.75 Inches. Overall Width - Side to Side: -4.38 Inches. Overall Product Weight: -1.23 Pounds. From the Manufacturer The Freeman mini-palm nailer is a small but powerful hammer to assist you in your hammering needs. There is no need to swing a hammer in tight spaces and hard to reach areas. The mini-palm nailer can equip nails from 6d to 16d and will drive up to 3-1/2-Inch nails. The Palm nailer weighs at 1.38-pounds for ease of use and comfort...
  • Clavadora Neumatica : Freeman PFL618BR 3-in-1 Pneumatic...
    Precio:  $53,449.00

    Clavadora Neumatica : Freeman PFL618BR 3-in-1 Pneumatic...

    -Titulo Original : Freeman PFL618BR 3-in-1 Pneumatic Flooring Nailer Ergonomic & Lightweight Nail Gun for Flooring with Padded Grip Long Reach Handle & Interchangeable No-Mar Baseplates-Fabricante : Freeman Pneumatics-Descripcion Original: NAILED IT: This versatile 3-in-1 flooring nailer drives 3 types of fasteners without having to change the magazine: T-cleats, L-cleats & staples. It features no-mar interchangeable base plates for stability & protection against scratches to floor surfaces // PRO DESIGN: This nailer features a durable & lightweight aluminum body, long reach handle with padded grip. & heat-treated one-piece hardened steel driver blade. It comes with a carrying case, oil, wrenches, goggles, and a no-mar white rubber mallet. // THE RIGHT TOOL FOR THE JOB: We're committed to providing outstanding value, top tier customer service and long-lasting, high-quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between. // QUALITY & DURABILITY: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warranted in the USA // TOUGH & DEPENDABLE: We make an array of durable construction tools and accessories, including staplers & nailers for siding, flooring, framing, finish, & roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode & Dewalt. // Style: Product description Freeman PFL618BR Features: -3-in-1 Flooring gun with hard case. -Anodized aluminum magazine. -Air filter / anti dust cap. -One piece driver blade. -Interchangeable face plates. -White rubber mallet. -Durable plastic case. -Oil, goggles and wrenches included. -3-in-1 design fastening system. -7 Year limited warranty. -Dimensions: 22.75 H x 16.75 W x 3.5 D. Specifications: -Fastener gauge: 15.5 (staples) 16 (cleats). -Fastener range: 1.5 - 2 and 0.25 crown staples from 1.5 - 2. -Operating pressure: 70 - 115 psi. -Magazine capacity: 100 - 120 pcs. From the Manufacturer Freeman PFL618BR 3-in-1 flooring stapler, T-Cleat, and L-Cleat nailer combination is the work horse in the Freeman line-up. Our gun shoots both cleated nails and staples. It shoots 15.5- and 16-gauge staples ranging from 1 to 2 inches, and L/T cleats ranging from 1-1/2 inches to 2 inches. The 3-in-1 magazine has a capacity of 100-120 staples/cleats. The body of this gun is constructed of durable die-cast aluminum for job site dependability for daily use. It comes with two composite non-marring base plates for added stability and protection against scratches to the flooring surface. The interchangeable base plates allow you to install 1/2- to 3/4-inch nail-down flooring. It provides a convenient long reach handle with a padded grip. Internally, the driver blade is constructed of a very tough heat-treated one-piece hardened steel, aluminum cylinder, high quality rubber o-rings, and internal air filter. This tool comes with carrying case, oil, wrenches, goggles, and a no-mar white rubber mallet. This tool is manufactured under the strict guidelines for quality control. Each gun is tested before it is approved for shipping. Freeman Pneumatic line of nailers was developed with the professional in mind. Our company has worked diligently to develop a product that could meet the demands of the Professional customer and still hold true to the value associated with our product and its price point. Freeman guns are sold, distributed, serviced, and warranted by a US company, Prime Global Products, Inc. PGP is proud to offer our nailers to professionals and do-it-yourselfers alike. Freeman nail guns are backed by our 7-year limited warranty. If your Freeman tool ever needs service please read our warranty policy for complete details...
  • Clavo de acabado de 2 DEWALT DCS16200 calibre 16 2500UN
    Precio:  $6,449.00

    Clavo de acabado de 2 DEWALT DCS16200 calibre 16 2500UN

    -Titulo Original : DEWALT DCS16200 2-Inch by 16 Gauge Finish Nail (2,500 per Box)-Fabricante : DEWALT-Descripcion Original: Duradero y confiable Manejabilidad constante para aplicaciones Ideal para trabajos de acabado. Viene en una caja de 2,500. Cada uña resistirá el óxido y la humedad...
  • Clavadora Neumatica : Bostitch N89c-1 A Rollo De 5 A 7.5cm
    Precio:  $88,309.00

    Clavadora Neumatica : Bostitch N89c-1 A Rollo De 5 A 7.5cm

    -Titulo Original : BOSTITCH N89C-1 Coil Framing Nailer-Fabricante : Bostitch-Descripcion Original: Pneumatic coil framing nailer with an adjustable exhaust // Patented push-button adjustable depth guide sets nails to desired depths quickly and easily // Lightweight magnesium design; aggressive wear guards to protect the tool from damage on abrasive surfaces // Magazine holds up to 300 nails // 12-1/4 inches long, 14 inches high; weighs 8.1 pounds; 7-year limited warranty // Product description 688-N89C-1 Features: -Type of Nailer:Framing Nailers -Type of Fastener:Nail Coils -Type of Fastener:Framing Nails -Fastener Size Range:1.5 - 3.25. Dimensions: -Overall Product Weight:9.9 Amazon.com The Bostitch pneumatic coil framing nailer is designed to be impressively rugged and powerful. Its sturdy nature is disguised by a lightweight magnesium housing that's easy to hold and capable of surviving some serious abuse on the job site. This hardy model even has aggressive wear guards that help protect it from damage when you use it on abrasive surfaces. The N89C-1 has a patented push-button adjustable depth guide to set nails at precisely the desired depths, quickly and conveniently, with minimal downtime between jobs. It also features an adjustable exhaust to direct cast-off air away from your face and your workpiece, for a clearer view of your project. This model has a driving power of 1,050 in./lbs., and it accepts 15-degree coil framing fasteners from 2 inches to 3-1/2 inches (.099 - .148-inch shank). It operates at 70-120 psi, with a 1/4-inch NPT thread fitting. The N89C-1 has a magazine that holds up to 300 nails. -- Cherie Priest Use the N89C-1 for almost any fastening application on the job site or home improvement project. It's perfect for framing, sheathing, siding, fencing, trusses, decks, bridging, pallets and crating, wood, or masonry. Stanley Bostitch pneumatic coil framing nailer. For small household jobs, an old-fashioned hammer is the perfect stand-by. But if you've got a bigger project on your to-do list, then a pneumatic power nailer could be your new best friend. Pneumatic nailers are a great alternative to traditionally powered nailers, because they're capable of providing more power -- and they operate with fewer moving parts, so a pneumatic nailer can take more abuse than its corded or battery-run cousins. All pneumatic tools require a steady supply of controlled, compressed air in order to work properly, and nailers are no exception. Bigger compressors with hardy motors and large tanks generate higher PSI levels and maintain them longer, so you'll probably want a piston-type, two-stage compressor to power your nailer. Smaller or single-stage models are fine for little projects, but if you need a pneumatic nailer, the odds are good that you're looking for some intense PSI and CFM ratings. Sometimes, a pneumatic nailer will come with its own compressor -- or it can be purchased as part of an air tool set. Pneumatic nailers use compressed air power to cock and release the hammer. In order to fire a fastener, a valve opens to let air fill a cylinder -- which has a piston that's driven down hard and fast. This forces the nail out of the gun and into your workpiece. Then the piston recoils, and another nail is loaded. Check manufacturer's guidelines to find out what pressure (PSI) and volume (CFM) of air will give your pneumatic nailer the best results. Also, keep in mind that any restrictions on the air hose will diminish the tool's performance. Hoses that are very long, contain too much moisture, or are incorrectly sized will reduce air flow. This can prematurely wear out your tool and cause it to perform poorly. Most models will feature a rubber nosepiece to prevent scuffing and marring of your workpieces, plus an exhaust system (rear or adjustable) to keep sawdust and debris out of your face and away from your project. Pneumatic nailers usually have an adjustable depth of drive, and depending on the model, they can accommodate nails up to 2-1/2 inches long, in a variety of different gauge sizes. With a powerful enough compressor behind them, they can shoot thousands of nails a day...
  • Clavadora Neumatica : BeA 12000450 992/25-553F Industrial...
    Precio:  $226,719.00

    Clavadora Neumatica : BeA 12000450 992/25-553F Industrial...

    -Titulo Original : BeA 12000450 992/25-553F Industrial Grade Pneumatic Stapler with Flare Tip,-Fabricante : BeA-Descripcion Original: Oil-Less operation // Tool free adjustable depth of drive // Weight: 2.5lbs // Rear exhaust with built in muffler // Rugged Carry Case // From the Manufacturer The B&C Eagle BN1855 18 gauge brad nailer is a lightweight tool designed for small carpentry work. The light weight housing and soft rubber grip offers stability and less fatigue. The oil free operation prevents oil staining on woodwork. The BN1855 has a large capacity magazine capable of holding up to 100 nails with a range in length between 5/8-Inch and 2-inches. A convenient fastener sight gauge allows you to see how many nails are in the tool to prevent dry firing. A rear exhaust with built in muffler directs the flow of the exhaust away from your face while working. This tool also has a convenient tool free adjustable depth of drive. The built-in trigger selection allows you to choose quickly and easily between single fire and bump fire nailing. The front of the tool includes a quick opening latch allowing you to clear jammed nails quickly and safely. Accessories include a plastic carrying case and belt hook. Works with most any 18 Gauge straight brad nail from 5/8-Inch to 2-Inches. Look for B&C Eagle B18 series (Green label) brad nails...
  • Clavadora Neumatica : Arrow Fastener Pt23g Arrow 23g Pin...
    Precio:  $11,519.00

    Clavadora Neumatica : Arrow Fastener Pt23g Arrow 23g Pin...

    -Titulo Original : Arrow Fastener PT23G Arrow 23G Pin Nailer-Fabricante : The Distribution Point FC-Descripcion Original: Maximum Pressure: 120 PSI // Fires 23 gauge pin nails from 1/2" to 1" // Easy quick-load magazine saves time // Adjustable exhaust cover directs air away from the user // Lightweight Design for easy handling // Arrow PT23G Pneumatic Pin Nailer is great for many trim jobs and hobby work. It's constructed of die-cast aluminum for a durable and lightweight tool and features a quick load magazine for easy reloading...
  • Clavadora Neumatica : Professional Woodworker 7555 18-Gauge.
    Precio:  $15,719.00

    Clavadora Neumatica : Professional Woodworker 7555 18-Gauge.

    -Titulo Original : Professional Woodworker 7555 18-Gauge 3/8-Inch-2-Inch Brad Nailer-Fabricante : North American Tool Domestic-Descripcion Original: Operation Pressure: 60 - 100 PSI // Magazine Capacity: 100 // Made in China // Air Consumption: .5 CFM @ 90 PSI // Air Inlet: 1/4 Inch-18 NPT // 100pc magazine capacity // 60 - 100-PSI operating range // This Professional Woodworker Brad Nailer drives 18-gauge nails from 3/8 in. to 2 in. length and features a single firing security system, with internal contact. It also features a 360 adjustable exhaust deflector and a quick release side load w/ sight window. Designed with an aluminum alloy body for lightweight use. The Professional Woodworker Brad Nailer includes a rubber grip handle, gun oil, Allen keys and male plug. Ideal for jobs requiring a strong pin and an easily concealed hole...
  • Clavadora Neumatica : Numax Sp123 23 Gauge 1-inch Pinner...
    Precio:  $9,739.00

    Clavadora Neumatica : Numax Sp123 23 Gauge 1-inch Pinner...

    -Titulo Original : NuMax SP123 23 Gauge 1-Inch Pinner Ergonomic & Lightweight Pneumatic Pin Nail Gun with Pin Size Selector & Safety Trigger-Fabricante : NuMax-Descripcion Original: NAILED IT: This pneumatic pinner uses 23 gauge headless pin nails ranging from ½” to 1” & it features a lightweight & durable aluminum body, ergonomic grip handle, reversible belt hook & trigger with a safety mechanism that prevents accidental firing. // SAFETY & PRECISION DESIGN: This pinner is ideal for custom applications like crafts, tracking decorative trim, small picture frames, hobby work, jewelry cases, moulding and much more. It features a pin size selector, anti-dust cap & ergonomic comfort grip // THE RIGHT TOOL FOR THE JOB: We're committed to providing outstanding value, top tier customer service and long-lasting, high-quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between. // QUALITY & DURABILITY: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warranted in the USA // TOUGH & DEPENDABLE: We make an array of durable construction tools and accessories, including staplers & nailers for siding, flooring, framing, finish, & roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode & Dewalt. // Great for custom applications such as crafts, tracking decorative trim, small picture frames, hobby work, jewelry cases, detailed trim and customer work // Uses 23 Gauge headless Pin Nails ranging from ½” to 1” pins // Size: Product description SP123 Features: -Micro pinner. -Good balance. -Anti-dust cap. -Ergonomically designed comfort Grip. Type of Nailer: -Pinners. Type of Fastener: -Headless Pins. Fastener Gauge: -20+. Generic Dimensions: -9'' H x 7'' W x 2.25'' D. Dimensions: Overall Height - Top to Bottom: -9 Inches. Overall Width - Side to Side: -7 Inches. Overall Product Weight: -2.25 Pounds. From the Manufacturer The NuMax 1-Inch 23ga. Pinner takes care of all of your finishing projects, such as molding, crafts, hobbies. It has a lightweight aluminum design. This tool is manufactured under the strict guidelines for quality control. NuMax Pneumatic line of nailers was developed with the professional in mind. Our company has worked diligently to develop a product that could meet the demands of the Professional customer and still hold true to the value associated with our product and its price point. NuMax guns are sold, distributed, serviced, and warranted by a US company, Prime Global Products, Inc. PGP is proud to offer our nailers to the professional and Do-it Yourselfers alike. NuMax nail guns are backed by our 1 Year Limited Warranty. If your NuMax tool ever needs service, please read our warranty policy for complete details. Please contact us with any questions regarding your NuMax Nailer at: www.NuMaxtools.com or by calling 888-669-5672...
  • Clavadora : Freeman PF18GLCN 18-Gauge Cleat...
    Precio:  $74,949.00

    Clavadora : Freeman PF18GLCN 18-Gauge Cleat...

    -Titulo Original : Freeman PF18GLCN 18-Gauge Cleat Flooring Nailer for Bamboo and Exotic Flooring Ergonomic & Lightweight Pneumatic Nail Gun with No-Mar Foot for Hardwood Flooring-Fabricante : Prime Global Products-Descripcion Original: NAILED IT: This pneumatic flooring nailer features a lightweight aluminum body, ergonomic comfort grip handle, light strike bumper & 3 interchangeable base plates. The no-mar foot will protect the surface from scratches & is safe for pre-finished flooring // PERFECT FOR HARDWOOD FLOORING: This cleat flooring nailer drives 18 gauge L-cleats, ideal for installing dense flooring like strand woven bamboo, Brazilian teak, cherry, engineered flooring and other exotic hardwoods. Magazine holds up to 120 fasteners. // THE RIGHT TOOL FOR THE JOB: We're committed to providing outstanding value, top tier customer service and long-lasting, high-quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between. // QUALITY & DURABILITY: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warranted in the USA // TOUGH & DEPENDABLE: We make an array of durable construction tools and accessories, including staplers & nailers for siding, flooring, framing, finish, & roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode & Dewalt. // The Freeman 18ga L Cleat Flooring Nailer offers an affordable solution for the professional and do-it-yourselfer for installation of hardwood floors such as Bamboo, Teak and other exotic woods. The drive blade is made of hardened steel with an aluminum cylinder and high-quality rubber O-rings. The body of the nailer is constructed of die-cast aluminum to stand up to the task of daily use. Generic L Cleats may be used with this model, however Freeman L Cleats are recommended. This nailer comes with 3 different sized base plates that provide stability and will protect the surface from scratches. Oil, wrenches, fiberglass mallet with a white, no-mar head, and user manual are included, backed by Freeman’s 7 year limited manufacturer’s warranty...
  • Clavadora Neumatica : 402A, 16-Gauge Manual Hardwood...
    Precio:  $72,769.00

    Clavadora Neumatica : 402A, 16-Gauge Manual Hardwood...

    -Titulo Original : 402A, 16-Gauge Manual Hardwood Flooring Nailer-Fabricante : Porta-Nails-Descripcion Original: Uses 2 in., and 1-1/2 in. T Headed 16 Ga nails // Binds 5/8 in., 3/4 in. and 33/32 in. domestic solid wood flooring // Accessory shoes, sold separately, allow you to face nail and nail 3/8 in. - 9/16 in. solid wood, 5/8 in. bamboo and 18mm flooring // Comes with an extension handle, mallet, angled shoe for 5/8 in. to 3/32 in. tongue and groove flooring, wrenches and a rugged carrying case // Multi-hit minimizes fatigue while providing greater impact // Size: Product Description Nothing attacks a hardwood flooring job like the Porta-Nails 402A, 16-Gauge Manual Hardwood Flooring Nailer. The first of its kind offering Porta-Nails original ratchet assembly, the nailer ensures that the ram does not return until the nail is properly seated. One or two strikes of the head is all it takes for preferred seating every time. Bind nails 5/8 in., 3/4 in. and 33/32 in. domestic solid wood flooring. Accessory shoes, sold separately, allow you to face nail and nail 3/8 in. - 9/16 in. solid wood, 5/8 in. bamboo and 18mm flooring. The patented anti-split nail cuts through wood without splitting your floor and three lengths of nails will insure you have the right fastener for the job. Nailer uses 2 in., and 1-1/2 in. T Headed 16 Gauge cleats. Flooring Nails and are also available in stainless steel for exterior use, when using over ACQ plywood or installing ACQ decking over ACQ joist. The nailer comes with an extension handle, mallet, angled shoe for 5/8 in. to 3/32 in. tongue and groove flooring, wrenches and a rugged carrying case. From the Manufacturer Designed for angle nailing 5/8- to 1-Inch tongue and groove hardwood flooring. Speed up the nailing process and insure the tightest floor possible with the Porta-Nailer hardwood flooring nailer. Besides tongue and groove flooring nail decorative paneling, sub-flooring, sheathing and roof decking. The unique ratcheting ram insures that the ram does not return until the nail is properly seated. Hit the ram until it returns and guarantee a properly set nail every time and the tightest floor possible. This configuration will nail 5/8, 3/4- and 33/32-Inch tongue and groove flooring. You can purchase shoe accessories separately for nailing thinner flooring (3/8 to 9/16-Inch) and face nailing. Its lightweight and durable construction combines the high strength of aluminum with precision machined heat treated steel parts making it light, long wearing and easy to handle. The Porta-Nailer is manufactured in the USA and comes with an extension handle, mallet and rugged carry case...
  • Clavos ,se Adapta A Nr83a5, Nr83a5 (s), Nr90ac5,..1000un
    Precio:  $17,759.00

    Clavos ,se Adapta A Nr83a5, Nr83a5 (s), Nr90ac5,..1000un

    -Titulo Original : Metabo HPT 20111SHPT 3-1/4 x .131 21-Degree Pneumatic Framing Nails, Bright Smooth Shank Plastic Collated Nails, Fits NR83A5, NR83A5(S), NR90AES1, NR90AC5, NR90GR2, NR1890DR, 1000-Count-Fabricante : Metabo-Descripcion Original: Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT The smooth shank nail provides excellent holding power in most wood applications Plastic collating not likely to cause splitting of wooden materials Open nose design, for easy extraction of a jammed nai...
  • Clavadora Neumatica : Numax SFR3490 34-Degree Clipped Head..
    Precio:  $29,509.00

    Clavadora Neumatica : Numax SFR3490 34-Degree Clipped Head..

    -Titulo Original : Numax SFR3490 34-Degree Clipped Head Framing Nailer Ergonomic & Lightweight Pneumatic Nail Gun with Depth Adjust & No-Mar Tip-Fabricante : Freeman Pneumatics-Descripcion Original: NAILED IT: This framing nailer has a tool free depth adjust and easy-load magazine. The anti-dry fire feature will stop it from firing when there are less than 5 nails in the magazine. It's great for framing, sheathing, remodeling and general outdoor uses // PRO DESIGN: This sturdy & ergonomic nailer features lightweight magnesium construction, a rubber comfort grip handle & an anti-dust cap & internal air filter for clean operation. A no-mar tip prevents dents, scratches and other damage to work surfaces. // THE RIGHT TOOL FOR THE JOB: We're committed to providing outstanding value, top tier customer service and long-lasting, high-quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between. // QUALITY & DURABILITY: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warranted in the USA // TOUGH & DEPENDABLE: We make an array of durable construction tools and accessories, including staplers & nailers for siding, flooring, framing, finish, & roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode & Dewalt. // The Numax 34 degree clipped head framing nailer (sfr3490), offers cost effective speed and power with a lightweight design. This tool is great for framing, sheathing, remodeling and general outdoor uses. It is designed with a tool free depth adjust and an easy-load magazine. The anti-dry fire feature wills top the nail gun from firing when there are less than 5 nails in the magazine...
  • Clavadora Neumatica : Fasco 11706F Pneumatic Pinner
    Precio:  $60,449.00

    Clavadora Neumatica : Fasco 11706F Pneumatic Pinner

    -Titulo Original : Fasco 11706F Pneumatic Pinner-Fabricante : Fasco-Descripcion Original: Use with 23-gauge pins and Brads from 12 to 50-millimeter // Anti dry Fire lock-out mechanism // Safety double trigger // Light, very powerful // Use with 18-gauge headless pin/Brad // This Bradder/pinner is used for 23-gauge pins and Brads from 12 to 50-millimeter...
  • Clavadora Neumatica : Bostitch Mcn-150 Strapshot Metal...
    Precio:  $69,269.00

    Clavadora Neumatica : Bostitch Mcn-150 Strapshot Metal...

    -Titulo Original : BOSTITCH MCN-150 StrapShot Metal Connector Nailer-Fabricante : Bostitch-Descripcion Original: Exposed nail tip places fastener point directly into connector holes for a faster, more precise application // Drives 1-1/2-inch straps hot fasteners as well as all other paper tape collated metal connector nails (.131 - .148 diameter) // At 4.6 pounds, The tool is up to 50% lighter than competitive models // Style: Product Description Metal connector nailer, drives galvanized, hardened, 1-1/2 inch metal connector nails, nails come in .131 0R .148 shank diameters, tool weight is 4.6 lbs. compact design 12 inch OC joists, comes with carrying case. Amazon.com Todays homes are stronger than ever. More knowledgeable homeowners, natural disasters, and stricter building codes have led the industry to adopt better ways of building houses. One important result of this has been the massive rise in the use of metal connectors. These metal connectors, whether it is in the form of a hurricane tie, joist hanger, or stud plate tie are used to strengthen the weaker joint areas of a home. Their popularity has given rise to a new necessity on the jobsite, the nailer to attach all of these metal connectors. The Bostitch STRAPSHOT Metal Connector Nailer (MCN-150) is the perfect tool for all types of metal connectors. Its exposed nail tip places the fastener point directly into connector holes for a faster, more precise application. It has a built in safety that prevents the tool from firing when not placed properly into the connector hole. The Bostitch STRAPSHOT Metal Connector Nailer (MCN-150) drives 1-1/2-inch, 35 degree Paper Tape Metal Connector Nails to secure any type of metal connector plate. These nails come specially hardened to ensure that if there is a misfire it can still drive through the metal connector plate safely. One of the features that set the Bostitch STRAPSHOT Metal Connector Nailer (MCN-150) apart from similar nailers is its size. Its compact design fits easily into hard to reach spaces including 12 inches on center studs (MCN150 only 10-1/2 inches tall). The tool is up to 50% lighter than competitive models for reduced fatigue and added maneuverability. The in line magazine also helps maneuverability by fitting into corners easily. Its low nail lockout feature prevents jams by preventing cycling with less than 5 nails for added safety. The tool also comes with hardened steel wear guards to protect the tool and adjustable exhaust to conveniently direct air away from the user. Finally, Bostitch has included a carrying case and our exclusive 7-Year Limited Warranty...
  • Clavadora Neumatica : Grip-Rite GRTMP16 Mini Palm Nailer
    Precio:  $13,029.00

    Clavadora Neumatica : Grip-Rite GRTMP16 Mini Palm Nailer

    -Titulo Original : Grip-Rite GRTMP16 Mini Palm Nailer-Fabricante : Grip-Rite-Descripcion Original: Shoots up to a 16d nail // Powerful compact design // Lightweight at only 1 lb // 70 Percent lighter and smaller than similar palm-sized air nailers // Magnetic nose // Product description Grip Rite Grtmp16 Palm Nailer Mini 16D Amazon.com With all the functionality of a full-sized palm nailer at one-third the size and weight, the Grip-Rite GRTMP16 Mini Palm Nailer fits into tight spaces where a full-sized palm nailer can't. It drives up to a 3-1/2-inch 16d nail without creating hammer marks, and it features a magnetic nose to hold the nail in place, so you get accurate placement every time.Mini palm nailer drives up to a 3-1/2-inch 16d nail in tight spaces One-third the size and weight of full-sized palm nailers for minimized fatigue Magnetic nose for accurate nail placement Complete kit comes with metric hex wrench, air tool oil, and male air plug Backed by a one-year warranty The compact Grip-Rite Mini Palm Nailer is designed to handle framing, hurricane straps, fencing, decking, and other nailing jobs in tight areas. Because it weighs just one pound, the tool is comfortable to operate for long periods without fatigue. Its compact size also makes it easy to store. A magnetic nail holder keeps each safely in place during positioning to free up one of your hands. One you've set the nail, the Mini Palm Nailer accurately delivers multiple hammer blows until the nail is fully driven. Included with the Grip-Rite Mini Palm Nailer is everything you need for immediate operation and maintenance, including a metric hex wrench to tighten screws, air tool oil for proper lubrication of O-rings and internal parts, and a male air plug. Since introducing its fasteners in 1975, Grip-Rite has become a major manufacturer of pneumatic fastening systems, fencing and wire goods, steel and poly products, building materials, and concrete accessories. The company's materials are used in a variety of home improvement and remodeling projects throughout the world. Mini palm nailer, metric hex wrench, air tool oil, and male air plug. See all Product descriptio...
  • Clavadora Neumatica : Estwing EFL50Q 2-in-1 Pneumatic...
    Precio:  $71,029.00

    Clavadora Neumatica : Estwing EFL50Q 2-in-1 Pneumatic...

    -Titulo Original : Estwing EFL50Q 2-in-1 Pneumatic Flooring Nailer and Stapler Ergonomic & Lightweight Pneumatic Nail Gun for Hardwood Flooring with Interchangeable Base Plates, No-Mar Feet & Mallet-Fabricante : Estwing-Descripcion Original: NAILED IT: This versatile flooring nailer uses 16 Gauge L-Cleats & 15-½” Gauge ½” Crown Flooring Staples. Interchangeable base plates let you install 3/8”– 3/4” solid hardwood including cherry, oak, maple, walnut & other nail down tongue & groove flooring // PRO DESIGN: This nailer features a durable & lightweight aluminum body, tool-free quick release to clear jams quickly, no-mar feet & a light strike bumper & interchangeable base plates. It comes with a fiberglass mallet & padded bag, plus wrenches & oil. // THE RIGHT TOOL FOR THE JOB: We're committed to providing outstanding value, top tier customer service and long-lasting, high-quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between. // QUALITY & DURABILITY: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warranted in the USA // TOUGH & DEPENDABLE: We make an array of durable construction tools and accessories, including staplers & nailers for siding, flooring, framing, finish, & roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode & Dewalt. // This flooring nailer gives you the flexibility to switch between the two most popular flooring fasteners without having to carry around two separate tools. Designed to stand up to the rigors of everyday use, it is built with a hardened steel drive blade, rubber O-rings, and an aluminum body. The nailer features a light strike bumper, and comes with a lightweight fiberglass mallet. The white rubber head prevents marring when you move your flooring into place. On the rare occasion the nailer jams, the tool-free quick release makes it easy get back to work quickly. The 360 degree swivel Industrial NPT fitting gives you flexibility when moving around, and the air filter and anti-dust cap keep the tool’s interior clean and running smoothly. Each nailer comes with a padded bag with front and interior pockets. This nailer can install most 5/8” – ¾” solid tongue and groove flooring, and comes with interchangeable base plates. The no-mar base makes it safe to use on prefinished or unfinished flooring. The 2 in 1 Nailer is designed to use 16-gauge L-cleats from 1.5” – 2” long, and also can use 15 ½ gauge ½” Crown Flooring Staples from 1.5” – 2” long. This flooring nailer is compatible with any brand staples or L-cleats. The 2-in-1 Flooring Nailer (Model: EFL50Q) is suitable for any professional or do-it-yourselfer. This flooring nailer is part of Estwing’s professional line of pneumatic tools, and is covered by a 5 Year Professional Tool Warranty and a 90 Day Wearable Parts Warranty...
  • Clavadora Neumatica : NuMax S2-118G2 18-Gauge 2 In 1 Brad...
    Precio:  $10,619.00

    Clavadora Neumatica : NuMax S2-118G2 18-Gauge 2 In 1 Brad...

    -Titulo Original : NuMax S2-118G2 18-Gauge 2 In 1 Brad Nailer and Stapler Ergonomic & Lightweight Pneumatic Combo Brad & Staple Gun with Depth Adjust-Fabricante : Prime Global Products-Descripcion Original: NAILED IT: This 2-in-1 tool features durable & lightweight aluminum construction, an anti-vibration comfort grip & adjustable depth for multiple applications. It's ideal for decorative trim, chair rail, baseboards, window casing, shoe & crown molding // ULTIMATE VERSATILITY: This nailer can use two types of fasteners: 18 gauge brad nails and 18 gauge ¼” narrow crown staples. It can accommodate nails ranging from 3/8” – 2” and staples ranging from ½” to 1-5/8.” It's useful for a wide range of projects , Operating Pressure 60 – 110 PSI // THE RIGHT TOOL FOR THE JOB: We're committed to providing outstanding value, top tier customer service and long-lasting, high-quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between. // QUALITY & DURABILITY: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warranted in the USA // TOUGH & DEPENDABLE: We make an array of durable construction tools and accessories, including staplers & nailers for siding, flooring, framing, finish, & roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode & Dewalt. // The Numax S2-118G2 - 2 in 1 gun shoots 1⅝ Narrow Crown Staples and 2” 18 Gauge Brad Nails. This 2 in 1 nailer is a high quality, innovated home improvement tool. This Crown Stapler/Brad Nailer has a lightweight die-cast aluminum design and a tool-free adjustable exhaust that conveniently directs exhaust from your face. The Numax 1⅝ Narrow Crown Stapler/18 gauge 2 Brad Nailer is great for interior and exterior finish and trim, cabinetry, cabinet backing, crafts and hobbies. This stapler/nailer is manufactured under the strict guidelines to ensure quality. The stapler/nailer is backed by Numax’s 1 year warranty...
  • Clavadora Neumatica : Makita An454 1-3/4 Coil Roofing Naile
    Precio:  $80,419.00

    Clavadora Neumatica : Makita An454 1-3/4 Coil Roofing Naile

    -Titulo Original : Makita AN454 1-3/4 Coil Roofing Nailer-Fabricante : Makita-Descripcion Original: Faster nail driving speed for maximum performance // Aluminum housing for longer tool life // Lightweight design at only 5.2 lbs. // Easy, one-step open, adjustable canister system for faster, more precise nail loading // “Tool-less” depth adjustment dial for more precise control in flush nailing shingles // The Makita 1-3/4 roofing Coil nailer (model AN454) combines rugged construction and robust performance with less weight (only 5.2 lbs.). The AN454 accepts standard .120 shank diameter Coil roofing nails from 3/4” to 1-3/4” nails in length. The AN454 is engineered for longer tool life with durable and lightweight aluminum housing and an easy-loading adjustable canister. Ease-of-use features include a tool-less depth adjustment engineered for more precise control and flush nailing. Additional features include large carbide inserts on the nosepiece for long lasting performance. Oversized steel wear plates are engineered to reduce abrasion on the tool...
  • Engrapadora Neumatica : Fasco F1b 84-16 Stapler
    Precio:  $35,599.00

    Engrapadora Neumatica : Fasco F1b 84-16 Stapler

    -Titulo Original : Fasco F1B 84-16 Stapler-Fabricante : Fasco-Descripcion Original: Descripción del producto Si tiene algunos muebles para tapizar, una cortina para colgar o cualquier otro proyecto de grapado, esta grapadora neumática de aire Fasco F1B 84-16 puede ser la solución ideal. Esta grapadora neumática funciona con grapas de corona de 1/4 a 5/8 de pulgada como las de las series Atro 84 y Bostitch SBNK4023. Puede cargar hasta 130 grapas en su cargador de carga inferior y recargarlo con una sola mano si no es suficiente para realizar el trabajo. Su agarre de goma antideslizante te permite trabajar con una sola mano y reduce las vibraciones que sientes para que puedas trabajar más tiempo con menos fatiga. Si desea que un trabajo se pegue cuando esté hecho, entonces ponga sus manos en la grapadora de aire Fasco Air Stapler y no la suelte. Del fabricante FASCO F1B 84-16 Grapadora: Ofrece fiabilidad, potencia y refinamiento europeos. Acciona las grapas de la serie 84 de la corona de 1/2 pulgada de ancho (intercambiadores con Bostitch SBNK 4023) que son fáciles de encontrar. El diseño de carga inferior proporciona facilidad y velocidad al recargar, cambiar de tamaño o despejar un atasco. Las grapas varían desde 1/4 de pulgada hasta 5/8 de pulgada de longitud de las patas. El cargador se abre con un fácil cierre de un dedo. Parachoques reversible para una mayor vida útil de las piezas. Una grapadora cómoda, rápida y duradera para tapicería y aplicaciones industriales. ...
  • Clavadora Neumatica : Freeman Pp123 - 23 Gauge 1-inch Pinne
    Precio:  $13,829.00

    Clavadora Neumatica : Freeman Pp123 - 23 Gauge 1-inch Pinne

    -Titulo Original : Freeman PP123 - 23 Gauge 1-Inch Pinner Ergonomic & Lightweight Pneumatic Nail Gun with Safety Trigger & Pin Size Selector for Crafts, Moulding, Picture Frames-Fabricante : Freeman Pneumatics-Descripcion Original: NAILED IT: This pneumatic pinner uses 23 gauge headless pin nails ranging from ½” to 1” & it features a lightweight & durable aluminum body, ergonomic grip handle, reversible belt hook & trigger with a safety mechanism that prevents accidental firing. // SAFETY & PRECISION DESIGN: This pinner is ideal for custom applications like crafts, tracking decorative trim, small picture frames, hobby work, jewelry cases, moulding and much more. It features a pin size selector, anti-dust cap & ergonomic comfort grip // THE RIGHT TOOL FOR THE JOB: We're committed to providing outstanding value, top tier customer service and long-lasting, high-quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between. // QUALITY & DURABILITY: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warranted in the USA // TOUGH & DEPENDABLE: We make durable tools including staplers & nailers for siding, flooring, framing, finish, & roofing. Compare to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, Dewalt, Porter Cable, Senco, Fasco, Grex & Air Locker // Size: The Freeman 1” 23ga. Pinner takes care of all of your finishing projects, such as molding, crafts, hobbies. It has a lightweight aluminum design and a tool-free adjustable exhaust that conveniently directs exhaust away from your face Perfect for those smaller projects. The lightweight ergonomic design provides a good feel for the perfect balance during operation. Features: 360-degree Adjustable Exhaust, Anodized Aluminum Cylinder, Teflon Oil-less O-Rings, Anodized Aluminum Rail, Air Filter / Dust Cap, Reversible Belt Hook, One Piece Drive Blade, with Oil, Goggles, & Wrenches Included. This tool is manufactured under the strict guidelines for quality control. Each gun is tested before it is approved for shipping. Freeman Pneumatic line of nailers was developed with the professional in mind. Our company has worked diligently to develop a product that could meet the demands of the Professional customer and still hold true to the value associated with our product and its price point. Freeman guns are sold, distributed, serviced, and warranted by a US company, Prime Global Products, Inc. PGP is proud to offer our nailers to the professional and Do-it Yourselfers alike. Freeman nail guns are backed by our 7 Year Limited Warranty. If your Freeman tool ever needs service, please read our warranty policy for complete details. Please contact use with any question regarding your Freeman Nailer at: www.freemantools.com or by calling 888-669-5672...
  • Clavadora Neumatica : B&C Eagle CN45R 15 Degree 3/4-Inch to.
    Precio:  $77,219.00

    Clavadora Neumatica : B&C Eagle CN45R 15 Degree 3/4-Inch to.

    -Titulo Original : B&C Eagle CN45R 15 Degree 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer-Fabricante : B & C Eagle-Descripcion Original: Tool free adjustable depth of drive // Adjustable exhaust deflector (tool free 360 Degree) // Weight: 4.8lbs // Adjustable shingle guide // Lightweight magnesium housing // From the Manufacturer The B&C Eagle CN45R coil roofing nailer has a light and rugged magnesium housing with a soft rubber grip designed to meet the needs of any job in any climate. The magazine has a capacity to hold up to 120 nails in lengths ranging from 3/4-inch to 1-3/4-inches. The built-in trigger selection allows you to choose quickly and easily between single fire and bump fire nailing. A 360 degree directional cap gives you the freedom to direct the flow of the exhaust away from your face while working. The CN45R coil roofing nailer is also equipped with a built in air filter to trap dirt from the inside of the tool keeping it clean during use and then expelling some of the debris once it is unplugged from the air source. Other convenient features include a tool free depth of drive, casting wear protection with anti-skid housing pads and an adjustable shingle guide. The CN45R has a patented spring loaded nail guide which assures the user of safely nailing every nail straight down to the last nail in the coil. Works with 15 degree coil roofing nails 3/4-Inch to 1-3/4-Inches in length. Look for B&C Eagle CR series (Purple label) coil roofing nails...
Mostrar del 1 al 24 (de 69 productos)
Páginas de Resultados:  1  2  3  [Siguiente >>]