Arriba

Herramientas > Eléctricas y Neumáticas > Engrapadoras y Clavadoras

Mostrar: 
Mostrar del 1 al 24 (de 79 productos)
Páginas de Resultados:  1  2  3  4  [Siguiente >>] 
  • Clavadora Neumatica : Metabo HPT NV45AB2 Roofing Nailer,...
    Precio:  $1,376,019.00

    Clavadora Neumatica : Metabo HPT NV45AB2 Roofing Nailer,...

    -Titulo Original : Metabo HPT NV45AB2 Roofing Nailer, 7/8-Inch up to 1-3/4-Inch Coil Nails, 16 Degree, Side Load, Nail Capacity - 120, Lightweight and Well-Balanced, 5 Year Warranty-Fabricante : Metabo HPT-Descripcion Original: Same tools. New name. Hitachi power tools has renamed to Metabo HPT // Tool-less depth of drive adjustment for precision nailing/flush driving // Side loading magazine convenient and easy for quick replenishment // 5.5 lbs, lightweight and well balanced for easy maneuverability // Carbide tipped push lever reduces wear // Rubber pads help keep nailer from sliding off roof when not in use // Quick driving for maximum efficiency // Pneumatic power feed and return allows tool to operate in the harshest conditions // The 1-3/4 Roofing nailer is used for various construction works such as the installation of asphalt roofing shingles and the installation of insulation boards. The NV45AB2 has a side load magazine...
  • Clavadora Neumatica : Estwing EFL50Q 2-in-1 Pneumatic...
    Precio:  $1,397,939.00

    Clavadora Neumatica : Estwing EFL50Q 2-in-1 Pneumatic...

    -Titulo Original : Estwing EFL50Q 2-in-1 Pneumatic Flooring Nailer and Stapler Ergonomic & Lightweight Pneumatic Nail Gun for Hardwood Flooring with Interchangeable Base Plates, No-Mar Feet & Mallet-Fabricante : Estwing-Descripcion Original: NAILED IT: This versatile flooring nailer uses 16 Gauge L-Cleats & 15-½” Gauge ½” Crown Flooring Staples. Interchangeable base plates let you install 3/8”– 3/4” solid hardwood including cherry, oak, maple, walnut & other nail down tongue & groove flooring // PRO DESIGN: This nailer features a durable & lightweight aluminum body, tool-free quick release to clear jams quickly, no-mar feet & a light strike bumper & interchangeable base plates. It comes with a fiberglass mallet & padded bag, plus wrenches & oil. // THE RIGHT TOOL FOR THE JOB: We're committed to providing outstanding value, top tier customer service and long-lasting, high-quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between. // QUALITY & DURABILITY: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warranted in the USA // TOUGH & DEPENDABLE: We make an array of durable construction tools and accessories, including staplers & nailers for siding, flooring, framing, finish, & roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode & Dewalt. // This flooring nailer gives you the flexibility to switch between the two most popular flooring fasteners without having to carry around two separate tools. Designed to stand up to the rigors of everyday use, it is built with a hardened steel drive blade, rubber O-rings, and an aluminum body. The nailer features a light strike bumper, and comes with a lightweight fiberglass mallet. The white rubber head prevents marring when you move your flooring into place. On the rare occasion the nailer jams, the tool-free quick release makes it easy get back to work quickly. The 360 degree swivel Industrial NPT fitting gives you flexibility when moving around, and the air filter and anti-dust cap keep the tool’s interior clean and running smoothly. Each nailer comes with a padded bag with front and interior pockets. This nailer can install most 5/8” – ¾” solid tongue and groove flooring, and comes with interchangeable base plates. The no-mar base makes it safe to use on prefinished or unfinished flooring. The 2 in 1 Nailer is designed to use 16-gauge L-cleats from 1.5” – 2” long, and also can use 15 ½ gauge ½” Crown Flooring Staples from 1.5” – 2” long. This flooring nailer is compatible with any brand staples or L-cleats. The 2-in-1 Flooring Nailer (Model: EFL50Q) is suitable for any professional or do-it-yourselfer. This flooring nailer is part of Estwing’s professional line of pneumatic tools, and is covered by a 5 Year Professional Tool Warranty and a 90 Day Wearable Parts Warranty...
  • Clavadora Neumatica : BOSTITCH BTFP72155 Smart Point DA...
    Precio:  $1,211,579.00

    Clavadora Neumatica : BOSTITCH BTFP72155 Smart Point DA...

    -Titulo Original : BOSTITCH BTFP72155 Smart Point DA Style Nailer Kit, Angle Finish-Fabricante : Bostitch-Descripcion Original: SMART POINT TECHNOLOGY: Easy nail placement due to a smaller nose and no need to compress the contact trip to actuate the tool. // DRIVES: 15 GA "DA" Style Angled Finish Nails from 1-1/4" to 2-1/2" length. // TOOL-FREE JAM RELEASE MECHANISM: For easy nail removal. // DIAL-A-DEPTH(TM) CONTROL: For precise countersinking of nails. // KIT INCLUDES: Nailer, 1/4" Air Fitting, Sample Fasteners, Carrying Case and Extra No-Mar Tips. // Includes Smart Point 16-Gauge Finish Nailer - BTFP71917, 1/4 in. Air Fitting, Sample Finish Nails, Carrying Case, Extra No-Mar Tip...
  • Clavadora Neumatica : Metabo Hpt Nr90aes1 Pneumatic Framing
    Precio:  $947,079.00

    Clavadora Neumatica : Metabo Hpt Nr90aes1 Pneumatic Framing

    -Titulo Original : Metabo HPT NR90AES1 Pneumatic Framing Nailer, 2 up to 3-1/2 Plastic Collated Full Head Nails .113 - .148, Tool-less Depth Adjustment, 21 Degree Magazine, Selective Actuation Switch, 5-Year Warranty-Fabricante : Metabo HPT-Descripcion Original: Same tools. New name. Hitachi power tools has renamed to Metabo HPT // New head guard design allows for quicker disassembly during tool maintenance // Lightweight at 7.5 lbs and well-balanced for ease of maneuverability and less user fatigue // Selective actuation switch allows for quick transitions between sequential and contact nailing with the simple flip of a switch // Accepts 2" up to 3-1/2" plastic collated framing nails // Tool-less depth adjustment dial allows the user to countersink or flush drive nails into a variety of materials without having to adjust the pressure at the compressor // Two-piece anodized aluminum magazine makes repairs or replacements easy and with minimal expense // Two-step nail loading makes fastener replenishments quick and easy, reducing downtime // Style: The NR90AES1 framing nailer drives plastic collated nails from 2 Up to 3-1/2 In length and features Metabo HPT next generation industrial design. the redesigned head guard allows for faster and easier disassembly process, saving valuable time during tool maintenance. Weighing only 7.5 lbs, it is easy to use all day, while still providing the power of a bulkier, heavier nailer. It can be used for floor and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction...
  • Clavos para enmarcar a 30°de 2 3/8  X.113 2000un
    Precio:  $565,079.00

    Clavos para enmarcar a 30°de 2 3/8 X.113 2000un

    -Titulo Original : Paslode, Framing Nails, 650603, 30 Degree RounDrive Brite, 2 3/8 Inch X.113 Gauge, Ring, 2,000 Per Box-Fabricante : Paslode-Descripcion Original: - Potente - Diseño de cabeza redonda reforzada para un mejor rendimiento de conducción en los materiales más duros. Descarga de clavos para comunicar un clavado uniforme - Preciso - Se une con fibras de madera para aumentar el poder de sujeción - Productivo: un 10 % más de clavos por tira significa menos recarga - Compatibilidad - Los clavos Paslode están optimizados para trabajar con herramientas Paslode; Clavadora inalámbrica XP o PowermasterPlus - Limpieza: la clasificación de la cinta de papel significa que no hay residuos en el lugar de trabajo para limpiar Descripción del producto Nuestros clavos líderes en la industria están diseñados y fabricados para coincidir con las especificaciones de las clavadoras Paslode para que su clavadora funcione sin problemas, con menos fallos de encendido y atascos mientras se coloca al ras, incluso en los materiales más duros. Del fabricante 2 3/8 pulgadas por .113 RS 2m Brit...
  • Clavadora Neumatica : Bostitch F21pl Round Head 1-1/2-inch.
    Precio:  $1,305,259.00

    Clavadora Neumatica : Bostitch F21pl Round Head 1-1/2-inch.

    -Titulo Original : BOSTITCH F21PL Round Head 1-1/2-Inch to 3-1/2-Inch Framing Nailer with Positive Placement Tip and Magnesium Housing-Fabricante : Bostitch-Descripcion Original: Compressor/Air Tool Features: Fastener Collation,Fastener Depth Control, 1-1/2-inch to 3-1/2-inch framing nailer; 1,050 inch-pounds of driving power; sequential and bump trigger // 2 nailers in one: includes two quick-change nosepieces, converts to framing or metal connector applications // Lightweight magnesium housing; integrated rubber skid pads; rubber grip // Includes 1 framing nailer; Power Source: Pneumatic // 14-1/4 by 20-1/2 inches; 8.1 pounds // 1-1/2-inch to 3-1/2-inch framing nailer; 1,050 inch-pounds of driving power; sequential and bump trigger // 2 nailers in one: includes two quick-change nosepieces, converts to framing or metal connector applications // Style: Product Description The product is RND Head Framing Nailer. Easy to use. The product is manufactured in China. Amazon.com The Bostitch F21PL Round-Head Framing Nailer is the ideal tool for framing, sheathing, subflooring, and bracing jobs. Perfect for professionals and weekend warriors alike, this nailer features a strong, lightweight magnesium body, quick-change nosepieces for plastic-collated and metal-connector nails, a 16-inch layout indicator, and more. 1,050 in./lbs. of driving powerQuick-change nosepieces for framing and metal connector nailsPatented push-button adjustable nail depthRecommended for use with HurriQuake nails The recommended tool for use with HurriQuake disaster-resistant nails, the F21Pl has a patented feature that lets you set nail depth with the simple push of a button. For further convenience, quick-change nosepieces let you switch from plastic-collated framing nails to metal connector nails in seconds.The high-capacity magazine holds up to 60 plastic collated 21-degree framing nails (2.0-3.5 inch) or 60 metal connector nails (1.5-2.5 inch). Its 16-inch layout indicator, located on the magazine, lets you know at a glance the correct distance between studs.And with an adjustable rafter hook, you can conveniently hang the nailer on joists and rafters during work breaks. The magnesium construction of the F21PL Round-Head Framing Nailer means this tool is light enough to use all day, while still being strong enough to reliably use again and again. It also means that this tool has the best power-to-weight ratio in its class: 1,050 in./lbs. to 8.1 pounds.The Bostitch F21PL Round Head Framing Nailer works with a standard air compressor and is backed by a seven-year limited warranty. Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts. Framing nailer and two quick-change nosepieces. See all Product descriptio...
  • BeA engrampadora de alambre fino calibre 22 grapas 71(c)
    Precio:  $1,144,089.00

    BeA engrampadora de alambre fino calibre 22 grapas 71(c)

    -Titulo Original : BeA 71/16-421 Fine Wire 22-Gauge Stapler for 71 Series or Senco C Style Staples with 3/8-Inch Crown and 1/4-Inch to 5/8-Inch Leg Length-Fabricante : Bea-Descripcion Original: Hecho en Alemania Acepta grapas de la serie 71 Grapadora de tapicería Acepta grapas estilo Serco ...
  • Clavadora Neumatica : BOSTITCH SB-2IN1 2-In-1 Narrow Crown..
    Precio:  $850,009.00

    Clavadora Neumatica : BOSTITCH SB-2IN1 2-In-1 Narrow Crown..

    -Titulo Original : BOSTITCH SB-2IN1 2-In-1 Narrow Crown Stapler/18-gauge Brad Nailer-Fabricante : Bostitch-Descripcion Original: 5/8- to 1-5/8 18-gauge Brad nailer and ½- to 1-1/2-inch 18 crown Staple Combo tool // Adjustable depth dial; tool-free directional exhaust; 135-inch-pounds driving power // Nail lock-out feature eliminates dry firing; MAGAZINE holds 100 nails // Product Description Drives both Brads and narrow crown finish staples for ultimate versatility. Applications include Interior and exterior finish and trim, furniture, cabinet work, staircases, paneling, crafts. Adjustable depth guide sets nails to desired depths quickly and conveniently. Tool-free adjustable exhaust conveniently directs exhaust away from the user. 135 in/lb. (Inches per pound) driving power. 70-100 PSI (pounds per square inch). 2.6 lb. (Pound). kit includes nailer, 1/4 Air fitting, 1000 1-5/8 Brad nails, 1000 1 Staples, carrying case, hex wrench, extra no-mar tip, and oil. Drives both Brads and narrow crown finish staples for ultimate versatility. This product is manufactured in china. This product meets customer requirement. Amazon.com No need to buy a brad nailer and a crown stapler separately, this super-versatile nailer/stapler tool packs two tools into one handy unit. Perfect for crafts, paneling, nailing finish and trim, cabinetry and more, this tool lets you swap nails for staplers rather than disconnecting and connecting a new tool to the compressor. In nailer mode, the unit drives brads up to a 1-5/8 inches in length for anything from stair construction to cabinet work. The stapler mode fires 18-gauge, 1-1/2-inch finish staples for easy furniture upholstering and craftwork. An adjustable depth guide sets staples and brads to desired depths quickly and conveniently. And, tool-free adjustable exhaust easily directs exhaust away from the user. --Brian D. Olson ¼-inch air fitting, 1,000 2-inch brad nails, 1,000 1-inch staples, carrying case hex wrench extra no-mar tip and oil. See all Product descriptio...
  • Clavadora Neumatica : Grip-Rite GRTMP16 Mini Palm Nailer
    Precio:  $222,289.00

    Clavadora Neumatica : Grip-Rite GRTMP16 Mini Palm Nailer

    -Titulo Original : Grip-Rite GRTMP16 Mini Palm Nailer-Fabricante : Grip-Rite-Descripcion Original: Shoots up to a 16d nail // Powerful compact design // Lightweight at only 1 lb // 70 Percent lighter and smaller than similar palm-sized air nailers // Magnetic nose // Product description Grip Rite Grtmp16 Palm Nailer Mini 16D Amazon.com With all the functionality of a full-sized palm nailer at one-third the size and weight, the Grip-Rite GRTMP16 Mini Palm Nailer fits into tight spaces where a full-sized palm nailer can't. It drives up to a 3-1/2-inch 16d nail without creating hammer marks, and it features a magnetic nose to hold the nail in place, so you get accurate placement every time.Mini palm nailer drives up to a 3-1/2-inch 16d nail in tight spaces One-third the size and weight of full-sized palm nailers for minimized fatigue Magnetic nose for accurate nail placement Complete kit comes with metric hex wrench, air tool oil, and male air plug Backed by a one-year warranty The compact Grip-Rite Mini Palm Nailer is designed to handle framing, hurricane straps, fencing, decking, and other nailing jobs in tight areas. Because it weighs just one pound, the tool is comfortable to operate for long periods without fatigue. Its compact size also makes it easy to store. A magnetic nail holder keeps each safely in place during positioning to free up one of your hands. One you've set the nail, the Mini Palm Nailer accurately delivers multiple hammer blows until the nail is fully driven. Included with the Grip-Rite Mini Palm Nailer is everything you need for immediate operation and maintenance, including a metric hex wrench to tighten screws, air tool oil for proper lubrication of O-rings and internal parts, and a male air plug. Since introducing its fasteners in 1975, Grip-Rite has become a major manufacturer of pneumatic fastening systems, fencing and wire goods, steel and poly products, building materials, and concrete accessories. The company's materials are used in a variety of home improvement and remodeling projects throughout the world. Mini palm nailer, metric hex wrench, air tool oil, and male air plug. See all Product descriptio...
  • Clavadora Neumatica : Bostitch N89c-1 A Rollo De 5 A 7.5cm
    Precio:  $1,781,869.00

    Clavadora Neumatica : Bostitch N89c-1 A Rollo De 5 A 7.5cm

    -Titulo Original : BOSTITCH N89C-1 Coil Framing Nailer-Fabricante : Bostitch-Descripcion Original: Pneumatic coil framing nailer with an adjustable exhaust // Patented push-button adjustable depth guide sets nails to desired depths quickly and easily // Lightweight magnesium design; aggressive wear guards to protect the tool from damage on abrasive surfaces // Magazine holds up to 300 nails // 12-1/4 inches long, 14 inches high; weighs 8.1 pounds; 7-year limited warranty // Product description 688-N89C-1 Features: -Type of Nailer:Framing Nailers -Type of Fastener:Nail Coils -Type of Fastener:Framing Nails -Fastener Size Range:1.5 - 3.25. Dimensions: -Overall Product Weight:9.9 Amazon.com The Bostitch pneumatic coil framing nailer is designed to be impressively rugged and powerful. Its sturdy nature is disguised by a lightweight magnesium housing that's easy to hold and capable of surviving some serious abuse on the job site. This hardy model even has aggressive wear guards that help protect it from damage when you use it on abrasive surfaces. The N89C-1 has a patented push-button adjustable depth guide to set nails at precisely the desired depths, quickly and conveniently, with minimal downtime between jobs. It also features an adjustable exhaust to direct cast-off air away from your face and your workpiece, for a clearer view of your project. This model has a driving power of 1,050 in./lbs., and it accepts 15-degree coil framing fasteners from 2 inches to 3-1/2 inches (.099 - .148-inch shank). It operates at 70-120 psi, with a 1/4-inch NPT thread fitting. The N89C-1 has a magazine that holds up to 300 nails. -- Cherie Priest Use the N89C-1 for almost any fastening application on the job site or home improvement project. It's perfect for framing, sheathing, siding, fencing, trusses, decks, bridging, pallets and crating, wood, or masonry. Stanley Bostitch pneumatic coil framing nailer. For small household jobs, an old-fashioned hammer is the perfect stand-by. But if you've got a bigger project on your to-do list, then a pneumatic power nailer could be your new best friend. Pneumatic nailers are a great alternative to traditionally powered nailers, because they're capable of providing more power -- and they operate with fewer moving parts, so a pneumatic nailer can take more abuse than its corded or battery-run cousins. All pneumatic tools require a steady supply of controlled, compressed air in order to work properly, and nailers are no exception. Bigger compressors with hardy motors and large tanks generate higher PSI levels and maintain them longer, so you'll probably want a piston-type, two-stage compressor to power your nailer. Smaller or single-stage models are fine for little projects, but if you need a pneumatic nailer, the odds are good that you're looking for some intense PSI and CFM ratings. Sometimes, a pneumatic nailer will come with its own compressor -- or it can be purchased as part of an air tool set. Pneumatic nailers use compressed air power to cock and release the hammer. In order to fire a fastener, a valve opens to let air fill a cylinder -- which has a piston that's driven down hard and fast. This forces the nail out of the gun and into your workpiece. Then the piston recoils, and another nail is loaded. Check manufacturer's guidelines to find out what pressure (PSI) and volume (CFM) of air will give your pneumatic nailer the best results. Also, keep in mind that any restrictions on the air hose will diminish the tool's performance. Hoses that are very long, contain too much moisture, or are incorrectly sized will reduce air flow. This can prematurely wear out your tool and cause it to perform poorly. Most models will feature a rubber nosepiece to prevent scuffing and marring of your workpieces, plus an exhaust system (rear or adjustable) to keep sawdust and debris out of your face and away from your project. Pneumatic nailers usually have an adjustable depth of drive, and depending on the model, they can accommodate nails up to 2-1/2 inches long, in a variety of different gauge sizes. With a powerful enough compressor behind them, they can shoot thousands of nails a day...
  • Clavadora Neumatica : Senco PC0781 Pneumatic Palm Nailer
    Precio:  $549,049.00

    Clavadora Neumatica : Senco PC0781 Pneumatic Palm Nailer

    -Titulo Original : Senco PC0781 Pneumatic Palm Nailer-Fabricante : Senco-Descripcion Original: Drives bulk nails from 5d to 70d // Balanced 2.5 pound weight // Soft rubber palm pad for comfortable grip // Magnetic nail guide for faster and easier driving // Leather grip reduces fatigue // Product Description Fits into the palm of the hand making it ideal for joust hangers, metal straps, and pole barn assembly. Leather grip with soft rubber palm pad reduces fatigue. Magnetic nail guide for faster and easier driving. Specifications: 50 - 125 psi (3.5-8.4 bar); Height: 5.8; Weight: 2.4 lbs. Fastener Specifications: Drives Bulk Nails from 5d to 70d. Includes: Leather grip.. Drives Bulk Nails From 5D To 70D. Balanced 2.5 Pound Weight. Soft Rubber Palm Pad For Comfortable Grip. Magnetic Nail Guide For Faster And Easier Driving. Leather Grip Reduces Fatigue Amazon.com Here's a handy little nailer at a great price. Palm nailers have their fans, and if you're one of them, you'll like this model. Its 2.5 pounds are well-balanced and made even easier to handle because of the soft rubber palm pad and nice leather grip. One downside of palm nailers is the need to feed each nail individually, but the A20 features a magnetic nail guide that speeds up your driving. It's ideal for joust hangers, metal straps, and pole barn assembly. The home do-it-yourselfer will like it because it eliminates the dimpling that always goes along with hand nailing. Just a little pressure activates the firing mechanism for trouble-free fastening.--Kris Jensen-Van Heste See all Product descriptio...
  • Clavadora Neumatica : BOSTITCH PN50 Mini Impact Nailer
    Precio:  $307,309.00

    Clavadora Neumatica : BOSTITCH PN50 Mini Impact Nailer

    -Titulo Original : BOSTITCH PN50 Mini Impact Nailer-Fabricante : Bostitch-Descripcion Original: Rubber grip designed to insulate and reduce vibration // Weighs only 1 lb. // 360° swivel air fitting for maximum accessibility // Front exhaust directs air away from users palm // Drives most common bulk finish, framing & timber nails // Product Description BOSTITCH PN50 Mini Impact Nailer From the Manufacturer The Bostitch PN50 Mini Impact Nailer has a rubber grip designed to insulate and reduce vibration. Lightweight at only 1 lb. It has a 360° swivel air fitting for maximum accessibility in tight spots. The front exhaust directs air away from users palm. Drives Most Common Bulk Finish, Framing & Timber Nails. Ideal in applications such as; Joist Hangers, Metal Connectors, and Driving Nails Into Confined Areas...
  • Metabo engrampadora Neumatica/calibre18/ 1.27-3.2cm N3804ab3
    Precio:  $449,869.00

    Metabo engrampadora Neumatica/calibre18/ 1.27-3.2cm N3804ab3

    -Titulo Original : Metabo HPT 1/4-Inch Narrow Crown Finish Stapler | Pneumatic | 18 Gauge | Accepts 1/2-Inch To 1-1/2-Inch Staples | 5-Year Warranty | N3804AB3-Fabricante : Metabo HPT-Descripcion Original: - SUJETADORES: acepta grapas de corona angosta de calibre 18 que varían en longitud desde 1/2 pulgada hasta 1-1/2 pulgada/ - PREMIO: calificado como el clavador preferido profesional durante 7 años consecutivos (2014 - 2020) por la revista Builder and Developer - APLICACIONES: Ideal para trabajos de molduras internas y externas, gabinetes de muebles y otros trabajos de acabado fino - LIGERO: Solo 2.3 lbs y bien equilibrado para facilitar su uso - GATILLO: El interruptor de activación selectiva permite al usuario seleccionar fácilmente el disparo secuencial o el clavado por contacto - AJUSTE DE PROFUNDIDAD: El ajuste de profundidad sin herramientas permite un acabado profesional con distintos materiales - CARGADOR: Sostiene hasta 130 grapas para máxima eficiencia - ESCAPE AJUSTABLE: El escape ajustable de 360 ??grados puede alejarse del usuario en cualquier dirección - CONEXIÓN DE AIRE: Inclinada hacia arriba para mantener la manguera convenientemente alejada del usuario y fuera de la pieza de trabajo La grapadora de corona angosta N3804AB3 cuenta con un gatillo de agarre antideslizante y un interruptor de activación de giro simple diseñado ergonómicamente; es ideal para trabajos de acabado interno y externo, gabinetes de muebles y otros trabajos de acabado fino. La N3804AB3 acepta grapas de corona angosta de calibre 18 que varían en /2 hasta 1-1/2 El ajuste de profundidad sin herramientas permite un acabado profesional con diferentes materiales: simplemente marque la profundidad deseada y termine el trabajo de manera eficiente Las mismas herramientas, nuevo nombre. Metabo HPT es la nueva marca de Koki Holdings America, anteriormente parte del Grupo Hitachi...
  • Clavadora Neumatica : BOSTITCH HP118K 23-Gauge 1/2-Inch to..
    Precio:  $995,599.00

    Clavadora Neumatica : BOSTITCH HP118K 23-Gauge 1/2-Inch to..

    -Titulo Original : BOSTITCH HP118K 23-Gauge 1/2-Inch to 1-3/16-Inch Pin Nailer-Fabricante : Bostitch-Descripcion Original: 1/2-Inch to 1-3/16-Inch 23-Gauge Pin Nailer, Low-Profile Nose-Piece Tapers for Clear Site // Adjustable High/Lower Power Switch for Depth Control and Longer Life // Lightweight and Durable Aluminum Housing // Includes Nailer, 1/4" Air Fitting, Oil, Nail Selection, Carrying Case, and Belt Hook // 7-Year Limited Warranty // Product Description Adjustable high/low power control sets pin depth without changing compressor setting. Low profile nosepiece tapers down to contact point. Lightweight, durable aluminum housing. Overmoulded grip. Rear exhaust. Specs: weight: 2.5 lbs.; driving power: 60 inch lbs.; operating pressure: 70-120 PSI; thread fitting Type 1/4 NPT; magazine capacity: 200 pins. Fastener specifications: 1/2 to 1 3/16 23GA headless pin nails. Includes: pin nailer; 1/4 air fitting; (500 each): 1/2 pins, 3/4 pins, 1 pins, & case. Amazon.com The Bostitch HP118K 23-Gauge 1/2-Inch to 1-3/16-Inch Headless Pin Nailer delivers the accuracy and comfortable handling you need to make quick work of detailed finish, trim, and woodworking projects. This pin nailer offers you the power of pneumatic action backed by Bostitch's long history of producing innovative fastening technology for dependable on-the-job performance. The Bostitch 23-Gauge 1/2-Inch to 1-3/16-Inch Pin Nailer features: Tapered nosepiece for spot-on precision 60 in./lbs. driving power for secure nailing Wide range of 23-gauge pin nails for ultimate versatility Reversible Belt hook for added convenience The Bostitch HP118K is well-suited for use with slim or delicate materials that might be split by an 18-gauge nail or brad. With this tool and set of 23-gauge pin nails, you can save time and money by preventing damage to work surfaces. An ideal choice for woodworking applications, the HP118K provides effective fastening for glue sets that are tough or impossible to clamp, and it will help you avoid the witness marks or holes that can be left by other driver heads, letting you create clean finished products. Designed to keep you in control at all times, this nailer offers an adjustable high/low power control that sets pin depths without requiring you to adjust your compressor setting. It backs this precision with the ability to deliver 60 in./lbs. of driving power, so you can be sure that each pin is securely seated. With the ability to handle 23-gauge headless pin nails that range from 1/2 inch to 1-3/16 inches, this nailer enables you to utilize a wide range of fasteners for job-specific performance. And its magazine capacity of 200 pins allows you to work without stopping to reload. The HP118K offers a full range of design features dedicated to smooth, safe, and intuitive use. It features a low-profile nosepiece that tapers down to the contact point which offers a clear line-of-site for perfect placement. An over-molded grip ensures slip-free handling, and it is balanced to sit comfortably in your hand during extended use. And, for added comfort while you work, the nailer's rear exhaust directs air away from your face. The pin nailer also features a reversible belt hook for convenience on the job. Its compact body is easy to maneuver, which is of particular importance when doing intricate work like crafting custom cabinetry or picture frames, and, thanks to a durable, lightweight aluminum housing, it weighs just 2.5 pounds. This lightweight durable tool operates between 70 and 120 PSI and includes a 1/4-inch NPT fitting for easy coupling with your air hose and compressor. This pin nailer is backed by a manufacturer's 7-year limited warranty. 1. Depress the spring loaded lever as shown bewlow in loading instructions Fig.1. 2. Pull sliding portion of magazine back as shown bewlow in loading instructions Fig.2 3. Load the stick of pins as shown bewlow in loading instructions Fig.3 with the arrow pattern pointing down as shown. If pins have black dots instead of arrows, the dots should be positioned up. 4. Close magazine as shown bewlow in loading instructions Fig.4 until it latches in the forward position. The tool is now ready for use. HP118K 23-Gauge Pin Nailer; 1/4-inch air fitting; 500 each of 1/2-inch pins, 3/4-inch pins, and 1-inch pins; tool lubricant; and carrying case. Model # PT-2312-3M PT-2319-3M PT-2325-3M PT-2330-3M Description 23 ga. 1/2 Headless Pin Nails - 3,000 ct. 23 ga. 3/4 Headless Pin Nails - 3,000 ct. 23 ga. 1 Headless Pin Nails - 3,000 ct. 23 ga. 1-3/16 Headless Pin Nails - 3,000 ct. Load instructions. View larger....
  • Clavadora Neumatica : BOSTITCH BTFP12569 2-in-1 Flooring...
    Precio:  $1,633,899.00

    Clavadora Neumatica : BOSTITCH BTFP12569 2-in-1 Flooring...

    -Titulo Original : BOSTITCH BTFP12569 2-in-1 Flooring Tool-Fabricante : Bostitch-Descripcion Original: DRIVES: 15.5 GA flooring staples or 16 GA "L" shaped flooring cleats from 1-1/2" to 2" length. // Has pneumatic driving action. Used in hardwood and engineered flooring // NON-MARRING BASE PLATES: For 1/2" (12.7 mm) through 3/4" (19.1 mm) flooring. // ERGONOMIC DESIGN: Has long handle with a comfortable rubber grip. // INCLUDES: Nailer, Interchangeable Base Plates, Mallet, Wrenches and 1/4" (6.4 mm) Air Fitting with Dust Cover. // The BOSTITCH BTFP12569 2-in-1 Flooring Tool drives 15.5ga staples and 16ga cleat nails from 1-1/2 to 2 length. It features mallet actuated pneumatic driving action, along with non-marring, interchangeable base plates. This tool is ergonomically designed with longer handle and comfortable rubber grip and is lightweight at 10.85 lbs. Low air requirements at 3.7 SCFM. Designed for hardwood and engineered flooring installation, which helps eliminate gaps between flooring boards. For 1/2 (12.7 mm) through 3/4 (19.1 mm) flooring, ready to use out of box. Includes Tool, Mallet, Oil, Wrenches, 1/4 (6.4 mm) air fitting...
  • Clavadora Neumatica De Palma Metabo Hpt Nh90ab 2-1/2 -3-1/2
    Precio:  $230,389.00

    Clavadora Neumatica De Palma Metabo Hpt Nh90ab 2-1/2 -3-1/2

    -Titulo Original : Metabo HPT NH90AB Palm Framing Nailer, 360 Degree Swivel Fitting, Accepts 2-1/2-Inch to 3-1/2-Inch Bulk Framing Nails, Over-molded Rubber Grip, Ideal for Joist Hangers & Metal Connectors-Fabricante : Metabo HPT-Descripcion Original: Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT // 360 degree swivel fitting for maximum maneuverability and ease of use // Magnetic nose holds a fastener in place for safe and accurate fastener placement // Front exhaust directs the air away from the user // Over-molded rubber grip for added comfort, better hold and reduced vibration // Accepts a 2-1/2" - 3-1/2" bulk nail // Lightweight at only 1.3 lbs // Ideal for installing joist hangers and metal connectors // Style: The NH90AB 3-D/2 Palm nailer accepts a 2-1/2 - 3-D/2 Bulk fastener, while Offering superior maneuverability when working in confined areas. It is ideal for installing joist hangers and metal connectors. Its 360 degree swivel Plug allows the hose to hang at any angle instead of straight out adding convenience when working in tight spaces. The over-molded rubber grip provides comfort, absorbs vibration and improves control...
  • Clavadora Neumatica : Metabo HPT NV83A5 Pneumatic Coil...
    Precio:  $1,991,779.00

    Clavadora Neumatica : Metabo HPT NV83A5 Pneumatic Coil...

    -Titulo Original : Metabo HPT NV83A5 Pneumatic Coil Framing Nailer, 2-Inch up to 3-1/4-Inch Round Head Coil Nails, Tool-less Depth Adjustment, 16 Degree Magazine, Hardened Claw Tip, Rafter Hook, 5-Year Warranty-Fabricante : Metabo HPT-Descripcion Original: Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT // Cylinder valve drive system for rapid response and increased durability // Selective actuation on trigger allows for either sequential or contact nailing // Rafter hook is included for convenience on the jobsite // Side load pop-out magazine for fast and easy reloads // Open nose design for easy extraction of a jammed nail // Ergonomic non-slip rubber grip on handle helps maintain a secure hold and comfort during use // Hardened claw tip resists wear on the nose and minimizes slippage when driving at an angle or "toe-nailing" // The NV83A5 Round head Coil framing nailer is used for construction work such as wall sheathing, roof decking, subflooring, Mobile and modular home construction, making of wooden boxes, pallets and drums, packing operations in manufacturing plants, and for other types of general Packing and crating work. The NV83A5 is like the original NV83A that you have Come To trust, but now with an improved trigger design and sharing all the same internal parts as the original NV83A. The NV83A5 relies on the same cylinder valve drive system as the NV83A, which offers both rapid response and great driving power...
  • Clavadora Neumatica : Estwing EMPN – Pneumatic Mini Palm...
    Precio:  $227,359.00

    Clavadora Neumatica : Estwing EMPN – Pneumatic Mini Palm...

    -Titulo Original : Estwing EMPN – Pneumatic Mini Palm Nailer-Fabricante : Estwing-Descripcion Original: Compact, lightweight design is perfect for hard to reach spaces // Tool-free depth adjust allows you to drive nails to a consistent depth every time // Rubber grip and magnetic nail holder ensures secure and controlled fastener placements // ¼” industrial NPT swivel fitting rotates 360° for maximum accessibility in tight spots // Impact driving mechanism Drives a wide variety of bulk nail sizes with ease // The Estwing Mini Palm Nailer is the ideal solution for working in confined spaces where a regular hammer falls short. Using a rapid hammering action to drive nails, the palm nailer saves your arm from hand nailing all day. To activate the firing mechanism, simply load a nail into the magnetic holder and press the palm nailer into your work surface. This nailer is compatible with any 6D-16D (.113” - .192”) hand driven nail ranging from 2” – 4”. Unlike conventional nail guns, the palm nailer is small, lightweight, and gives you precise placement and depth control. The small size makes it perfect for joist hangers, decking, fencing, and other spaces too small for your standard framing nailer. The tool-free depth adjust provides a wide variety of options for driving depth, while the air filter and anti-dust cap help keep the interior of your tool clean and functioning smoothly. The rubber backing gives a good grip while you squeeze into tight spaces, and the magnetic nail holder secures nails so you can place each one accurately. The ¼” Industrial NPT swivel fitting rotates 360 for additional flexibility in confined spaces.The mini palm nailer (Model: EMPN) is suitable for any professional or do-it-yourselfer, and is high-performing in both indoor and outdoor applications. This mini palm nailer is part of Estwing’s professional line of pneumatic tools, and is covered by a 5 Year Professional Tool Warranty and a 90 Day Wearable Parts Warranty...
  • Clavadora Neumatica : Dewalt Dwfp12569 2-n-1 Flooring Tool
    Precio:  $1,885,079.00

    Clavadora Neumatica : Dewalt Dwfp12569 2-n-1 Flooring Tool

    -Titulo Original : DEWALT DWFP12569 2-N-1 Flooring Tool-Fabricante : Dewalt-Descripcion Original: Lightweight at 10.6 lbs for better balance and control // Optimized for the most popular solid flooring fasteners, 15.5ga Staples and 16ga “L” Cleat Nails // Interchangeable, Non-marring base plates adjust to all sizes of flooring // Ergonomically designed with longer handle and comfortable rubber grip for ease of use // Lower CFM requirements for less compressor run-time // From 1924 to 2016 DeWalt continues to design and optimize professional workhorse solutions- tools, accessories and service - to ensure absolute confidence for the toughest jobsite conditions. We are DeWalt (Dewe2), and we are guaranteed tough. Includes mallet, oil, wrenches, 1/4 (6.4 mm) air fitting with dust cove...
  • clavadora neumatica Dewalt Dw66c-1  15° espiral  2 1/2
    Precio:  $1,705,489.00

    clavadora neumatica Dewalt Dw66c-1 15° espiral 2 1/2

    -Titulo Original : DEWALT DW66C-1 2-1/2 Inch 15 Degree Coil Siding And Fencing Nailer-Fabricante : DEWALT-Descripcion Original: Dewalt Dw66c-1 Clavadora de cercas y revestimientos en espiral de 2-1/2 pulgadas y 15 grados - Carcasa de aluminio duradera y liviana (4,9 libras). El pie de goma suave ayuda a prevenir daños a la superficie de trabajo. - Revestimiento en espiral y revestimiento publicitario para cercas con escape ajustable sin herramientas - Fácil de usar Sobre enrollable para revestimiento y cercas con escape ajustable sin herramientas. Carcasa de aluminio duradera y liviana (4,9 libras). El pie de goma suave ayuda a prevenir daños a la superficie de trabajo. Gancho para viga ajustable sin herramientas para mayor comodidad. Impulsa alambres soldados y clavos en espiral insertados de plástico. Profundidad de ajuste sin herramientas para un ajuste preciso de los sujetadores. El cargador tiene capacidad para hasta 300 clavos. Presión de funcionamiento 70-120 psi. Incluye manuales...
  • Clavadora Neumatica : Freeman PFL618BR 3-in-1 Pneumatic...
    Precio:  $1,054,829.00
    Expira: 05/04/2021

    Clavadora Neumatica : Freeman PFL618BR 3-in-1 Pneumatic...

    -Titulo Original : Freeman PFL618BR 3-in-1 Pneumatic Flooring Nailer Ergonomic & Lightweight Nail Gun for Flooring with Padded Grip Long Reach Handle & Interchangeable No-Mar Baseplates-Fabricante : Freeman Pneumatics-Descripcion Original: NAILED IT: This versatile 3-in-1 flooring nailer drives 3 types of fasteners without having to change the magazine: T-cleats, L-cleats & staples. It features no-mar interchangeable base plates for stability & protection against scratches to floor surfaces // PRO DESIGN: This nailer features a durable & lightweight aluminum body, long reach handle with padded grip. & heat-treated one-piece hardened steel driver blade. It comes with a carrying case, oil, wrenches, goggles, and a no-mar white rubber mallet. // THE RIGHT TOOL FOR THE JOB: We're committed to providing outstanding value, top tier customer service and long-lasting, high-quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between. // QUALITY & DURABILITY: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warranted in the USA // TOUGH & DEPENDABLE: We make an array of durable construction tools and accessories, including staplers & nailers for siding, flooring, framing, finish, & roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode & Dewalt. // Style: Product description Freeman PFL618BR Features: -3-in-1 Flooring gun with hard case. -Anodized aluminum magazine. -Air filter / anti dust cap. -One piece driver blade. -Interchangeable face plates. -White rubber mallet. -Durable plastic case. -Oil, goggles and wrenches included. -3-in-1 design fastening system. -7 Year limited warranty. -Dimensions: 22.75 H x 16.75 W x 3.5 D. Specifications: -Fastener gauge: 15.5 (staples) 16 (cleats). -Fastener range: 1.5 - 2 and 0.25 crown staples from 1.5 - 2. -Operating pressure: 70 - 115 psi. -Magazine capacity: 100 - 120 pcs. From the Manufacturer Freeman PFL618BR 3-in-1 flooring stapler, T-Cleat, and L-Cleat nailer combination is the work horse in the Freeman line-up. Our gun shoots both cleated nails and staples. It shoots 15.5- and 16-gauge staples ranging from 1 to 2 inches, and L/T cleats ranging from 1-1/2 inches to 2 inches. The 3-in-1 magazine has a capacity of 100-120 staples/cleats. The body of this gun is constructed of durable die-cast aluminum for job site dependability for daily use. It comes with two composite non-marring base plates for added stability and protection against scratches to the flooring surface. The interchangeable base plates allow you to install 1/2- to 3/4-inch nail-down flooring. It provides a convenient long reach handle with a padded grip. Internally, the driver blade is constructed of a very tough heat-treated one-piece hardened steel, aluminum cylinder, high quality rubber o-rings, and internal air filter. This tool comes with carrying case, oil, wrenches, goggles, and a no-mar white rubber mallet. This tool is manufactured under the strict guidelines for quality control. Each gun is tested before it is approved for shipping. Freeman Pneumatic line of nailers was developed with the professional in mind. Our company has worked diligently to develop a product that could meet the demands of the Professional customer and still hold true to the value associated with our product and its price point. Freeman guns are sold, distributed, serviced, and warranted by a US company, Prime Global Products, Inc. PGP is proud to offer our nailers to professionals and do-it-yourselfers alike. Freeman nail guns are backed by our 7-year limited warranty. If your Freeman tool ever needs service please read our warranty policy for complete details...
  • Clavadora Neumatica BOSTITCH  1-3/4(RN46)
    Precio:  $1,305,829.00

    Clavadora Neumatica BOSTITCH 1-3/4(RN46)

    -Titulo Original : BOSTITCH Coil Roofing Nailer, 1-3/4-Inch to 1-3/4-Inch (RN46)-Fabricante : Bostitch-Descripcion Original: La clavadora para techos en espiral de 3/4 de pulgada a 1-3 / 4 de pulgada con mecanismo de bloqueo evita el disparo cuando está vacía. Presión de funcionamiento: 70-120 psi Control de profundidad ajustable, controlador redondo completo, protectores de desgaste del cuerpo y del cargador, recipiente de carga lateral Puntas de aluminio y carburo duraderas pero ligeras para una larga vida útil. Ángulo del cargador: 15 grados Recipiente patentado de carga lateral de acción simple para una carga rápida de clavos en un solo paso. Guía de tejas ajustable para un espaciado rápido de teja...
  • Clavadora : Freeman PDX50C 3-in-1 Flooring Cleat...
    Precio:  $1,136,699.00

    Clavadora : Freeman PDX50C 3-in-1 Flooring Cleat...

    -Titulo Original : Freeman PDX50C 3-in-1 Flooring Cleat Nailer and Stapler Ergonomic & Lightweight Nail Gun for Tongue & Grove & Hardwood Flooring, Uses T-Cleats, L-Cleats & Staples-Fabricante : Freeman Pneumatics-Descripcion Original: NAILED IT: This 3-in-1 flooring nailer uses 16-gauge T-Cleats and L-Cleats & 15.5-gauge flooring staples. It comes with Interchangeable base plates that make it perfect for both solid wood tongue & groove or engineered flooring from for 1/2" to 3/4" // PRO DESIGN: This durable nailer features an anodized aluminum magazine, no mar protection plate & self leveling front foot. It's ideal for solid wood tongue & groove flooring from 1/2" to 23/32" in thickness. Comes with a 3 pound fiberglass handle mallet // THE RIGHT TOOL FOR THE JOB: We're committed to providing outstanding value, top tier customer service and long-lasting, high-quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between. // QUALITY & DURABILITY: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warranted in the USA // TOUGH & DEPENDABLE: We make an array of durable construction tools and accessories, including staplers & nailers for siding, flooring, framing, finish, & roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode & Dewalt. // Style: Product Description The Freeman 3-in-1 Flooring Nailer/Stapler has the ability to equip 3 types of flooring fasteners (T-Cleats, L-Cleats and Staples) for the professional and do-it-yourselfer alike. The PDX50C is only 9.5 pounds, which will relieve some strain when working on long flooring projects. It is also equipped with an anodized aluminum magazine, no mar protection plate, air filter/anti-dust cap, one piece heat treated driver blade, self leveling front foot and high quality internal wearable parts. The PDX50C can be used on solid wood tongue and groove flooring measuring from 1/2-Inch to 23/32-Inch in thickness. The PDX50C is the first of its kind on the market due to several factors: overall weight, eliminates the need for a prefinished flooring adapter and comes standard with a 3 pound fiberglass handle mallet. Like all Freeman nailers, the PDX50C nailer/stapler is also backed by the Freeman 7 Year Limited Warranty. From the Manufacturer The Freeman 3-in-1 Flooring Nailer/Stapler has the ability to equip 3 types of flooring fasteners (T-Cleats, L-Cleats and Staples) for the professional and do-it-yourselfer alike. The PDX50C is only 9.5 pounds, which will relieve some strain when working on long flooring projects. It is also equipped with an anodized aluminum magazine, no mar protection plate, air filter/anti-dust cap, one piece heat treated driver blade, self leveling front foot and high quality internal wearable parts. The PDX50 can be used on solid wood tongue and groove flooring measuring from 1/2-Inch to 23/32-Inch in thickness. The PDX50 is the first of its kind on the market due to several factors: overall weight, eliminates the need for a prefinished flooring adapter and comes standard with a 3 pound fiberglass handle mallet. Like all Freeman nailers, the PDX50 nailer/stapler is also backed by the Freeman 7 Year Limited Warranty...
  • Clavadora Neumatica : Freeman PBR32Q 1-1/4-Inch Brad Nailer.
    Precio:  $333,659.00

    Clavadora Neumatica : Freeman PBR32Q 1-1/4-Inch Brad Nailer.

    -Titulo Original : Freeman PBR32Q 1-1/4-Inch Brad Nailer with Quick Jam Release and Depth Adjust-Fabricante : Freeman Pneumatics-Descripcion Original: Ideal for decorative trim, shoe molding, base board, crown molding, base molding, door and window casing, door installation, chair rail, hand railing and other projects // Quick Release for easy access clearing jams // Uses 18-Gauge straight brad nails ranging from 3/8-in to 1-1/4-in // Dual spring in-line magazine provides a consistent feed of fasteners to the drive blade // Reversible belt hook allows the tool to stay close by, but not in the way // Style: Product description 1' Brad Nailer with Quick Jam Release and Depth Adjust The Freeman PBR32Q 1-1/4 18 Gauge Brad Nailer is a professional quality, innovated home improvement tool. The Freeman Brad Nailer features an oil-free operation that requires no regular maintenance and eliminates the risk of stains on project surfaces. This brad nailer has a lightweight aluminum design and a tool-free adjustable exhaust that conveniently directs exhaust from your face, quick release nose for easy jamb clearing and tool-free depth adjust. This tool also comes equipped with Teflon o-rings, one piece drive blade, air filter, dust cap and dual spring magazine which makes the Freeman nailer the oblivious choice. The Freeman 18 gauge 1-1/4' Brad Nailer is great for interior and exterior finish and trim, furniture, cabinetry, crafts and hobbies. This nailer is manufactured under the strict guidelines to ensure professional quality. Features: 360 adjustable exhaust Anodized aluminum rail and cylinder Air filter/anti-dust cap One piece driver blade Reversible belt hook Co From the Manufacturer The Freeman PBR32Q is equipped with a 360-Degree adjustable exhaust, anodized aluminum cylinder, Teflon oil-less O-rings, one piece heat treated steel driver blade, finger-depth adjustment, no-mar tip, quick jamb release, anodized aluminum rail and an air filter/dust cap. The product also includes a reversible belt hook, oil, goggles and wrenches. The Freeman straight 1-1/4-Inch brad nailer has a lightweight aluminum design and a tool-free adjustable exhaust that conveniently directs exhaust away from your face. The 18-gram 1-1/4-Inch brad nailer is great for interior and exterior finish and trim, furniture, cabinet work, crafts and hobbies. This tool is manufactured under strict guidelines for quality control. Each gun is tested before it is approved for shipping. Freeman Pneumatic line of nailers was developed with the professional in mind. Our company has worked diligently to develop a product that could meet the demands of the professional customer and still hold true to the value associated with our product and its price point...
Mostrar del 1 al 24 (de 79 productos)
Páginas de Resultados:  1  2  3  4  [Siguiente >>]