Herramientas > Eléctricas y Neumáticas > Engrapadoras y Clavadoras
Mostrar del 1 al 24 (de 83 productos)
-
Precio: $230,389.00
-
Precio: $1,896,769.00
-
Precio: $227,359.00
-
Precio: $947,079.00
-
Precio: $1,780,259.00
-
Expira:
05/04/2021Precio: $1,081,199.00 -
Precio: $1,313,639.00
-
Precio: $1,136,699.00
-
Precio: $255,329.00
-
Precio: $1,182,089.00
-
Precio: $1,207,269.00
-
Precio: $1,274,509.00
-
Precio: $2,529,569.00
-
Precio: $679,719.00
-
Precio: $540,219.00
-
Precio: $1,550,609.00
-
Precio: $410,349.00
-
Precio: $1,633,899.00
-
Precio: $1,120,259.00
-
Precio: $1,614,579.00
-
Precio: $1,096,439.00
-
Precio: $1,885,079.00
-
Precio: $565,079.00
-
Precio: $570,189.00
-
Precio: $230,389.00
Clavadora Neumatica De Palma Metabo Hpt Nh90ab 2-1/2 -3-1/2
-Titulo Original : Metabo HPT NH90AB Palm Framing Nailer, 360 Degree Swivel Fitting, Accepts 2-1/2-Inch to 3-1/2-Inch Bulk Framing Nails, Over-molded Rubber Grip, Ideal for Joist Hangers & Metal Connectors-Fabricante : Metabo HPT-Descripcion Original: Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT // 360 degree swivel fitting for maximum maneuverability and ease of use // Magnetic nose holds a fastener in place for safe and accurate fastener placement // Front exhaust directs the air away from the user // Over-molded rubber grip for added comfort, better hold and reduced vibration // Accepts a 2-1/2" - 3-1/2" bulk nail // Lightweight at only 1.3 lbs // Ideal for installing joist hangers and metal connectors // Style: The NH90AB 3-D/2 Palm nailer accepts a 2-1/2 - 3-D/2 Bulk fastener, while Offering superior maneuverability when working in confined areas. It is ideal for installing joist hangers and metal connectors. Its 360 degree swivel Plug allows the hose to hang at any angle instead of straight out adding convenience when working in tight spaces. The over-molded rubber grip provides comfort, absorbs vibration and improves control... -
Precio: $1,896,769.00
Clavadora Neumatica : Metabo HPT NV83A5 Pneumatic Coil...
-Titulo Original : Metabo HPT NV83A5 Pneumatic Coil Framing Nailer, 2-Inch up to 3-1/4-Inch Round Head Coil Nails, Tool-less Depth Adjustment, 16 Degree Magazine, Hardened Claw Tip, Rafter Hook, 5-Year Warranty-Fabricante : Metabo HPT-Descripcion Original: Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT // Cylinder valve drive system for rapid response and increased durability // Selective actuation on trigger allows for either sequential or contact nailing // Rafter hook is included for convenience on the jobsite // Side load pop-out magazine for fast and easy reloads // Open nose design for easy extraction of a jammed nail // Ergonomic non-slip rubber grip on handle helps maintain a secure hold and comfort during use // Hardened claw tip resists wear on the nose and minimizes slippage when driving at an angle or "toe-nailing" // The NV83A5 Round head Coil framing nailer is used for construction work such as wall sheathing, roof decking, subflooring, Mobile and modular home construction, making of wooden boxes, pallets and drums, packing operations in manufacturing plants, and for other types of general Packing and crating work. The NV83A5 is like the original NV83A that you have Come To trust, but now with an improved trigger design and sharing all the same internal parts as the original NV83A. The NV83A5 relies on the same cylinder valve drive system as the NV83A, which offers both rapid response and great driving power... -
Precio: $227,359.00
Clavadora Neumatica : Estwing EMPN – Pneumatic Mini Palm...
-Titulo Original : Estwing EMPN – Pneumatic Mini Palm Nailer-Fabricante : Estwing-Descripcion Original: Compact, lightweight design is perfect for hard to reach spaces // Tool-free depth adjust allows you to drive nails to a consistent depth every time // Rubber grip and magnetic nail holder ensures secure and controlled fastener placements // ¼” industrial NPT swivel fitting rotates 360° for maximum accessibility in tight spots // Impact driving mechanism Drives a wide variety of bulk nail sizes with ease // The Estwing Mini Palm Nailer is the ideal solution for working in confined spaces where a regular hammer falls short. Using a rapid hammering action to drive nails, the palm nailer saves your arm from hand nailing all day. To activate the firing mechanism, simply load a nail into the magnetic holder and press the palm nailer into your work surface. This nailer is compatible with any 6D-16D (.113” - .192”) hand driven nail ranging from 2” – 4”. Unlike conventional nail guns, the palm nailer is small, lightweight, and gives you precise placement and depth control. The small size makes it perfect for joist hangers, decking, fencing, and other spaces too small for your standard framing nailer. The tool-free depth adjust provides a wide variety of options for driving depth, while the air filter and anti-dust cap help keep the interior of your tool clean and functioning smoothly. The rubber backing gives a good grip while you squeeze into tight spaces, and the magnetic nail holder secures nails so you can place each one accurately. The ¼” Industrial NPT swivel fitting rotates 360 for additional flexibility in confined spaces.The mini palm nailer (Model: EMPN) is suitable for any professional or do-it-yourselfer, and is high-performing in both indoor and outdoor applications. This mini palm nailer is part of Estwing’s professional line of pneumatic tools, and is covered by a 5 Year Professional Tool Warranty and a 90 Day Wearable Parts Warranty... -
Precio: $947,079.00
Clavadora Neumatica : Metabo Hpt Nr90aes1 Pneumatic Framing
-Titulo Original : Metabo HPT NR90AES1 Pneumatic Framing Nailer, 2 up to 3-1/2 Plastic Collated Full Head Nails .113 - .148, Tool-less Depth Adjustment, 21 Degree Magazine, Selective Actuation Switch, 5-Year Warranty-Fabricante : Metabo HPT-Descripcion Original: Same tools. New name. Hitachi power tools has renamed to Metabo HPT // New head guard design allows for quicker disassembly during tool maintenance // Lightweight at 7.5 lbs and well-balanced for ease of maneuverability and less user fatigue // Selective actuation switch allows for quick transitions between sequential and contact nailing with the simple flip of a switch // Accepts 2" up to 3-1/2" plastic collated framing nails // Tool-less depth adjustment dial allows the user to countersink or flush drive nails into a variety of materials without having to adjust the pressure at the compressor // Two-piece anodized aluminum magazine makes repairs or replacements easy and with minimal expense // Two-step nail loading makes fastener replenishments quick and easy, reducing downtime // Style: The NR90AES1 framing nailer drives plastic collated nails from 2 Up to 3-1/2 In length and features Metabo HPT next generation industrial design. the redesigned head guard allows for faster and easier disassembly process, saving valuable time during tool maintenance. Weighing only 7.5 lbs, it is easy to use all day, while still providing the power of a bulkier, heavier nailer. It can be used for floor and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction...
-
Precio: $1,780,259.00
Engrapadora Dewalt DCN681B sin bateria
-Titulo Original : DEWALT 20V MAX* Narrow Crown Stapler, 18GA, Tool Only (DCN681B)-Fabricante : DEWALT-Descripcion Original: - Gatillo seleccionable sin herramientas alimentado por batería - Bloqueo de clavo bajo, CARGADOR de carga inferior - CARGADOR de carga inferior - *La tensión inicial máxima de la batería (medida sin carga de trabajo) es de 20 voltios. El voltaje nominal es 18 La grapadora de corona angosta DEWALT DCN681 de calibre 18 impulsa grapas de corona angosta de 1/4 pulg. de calibre 18 de 1/2 pulg. a 1-1/2 pulg., lo que la hace ideal para gabinetes, muebles, paneles y contrapisos para pisos. Con su motor sin escobillas alimentado por una batería de iones de litio DEWALT 20V MAX*, la DCN681 está lista para funcionar sin la molestia de usar gasolina, compresor y manguera. Realice trabajos grandes y pequeños con las características de una herramienta neumática y la libertad de una herramienta inalámbrica. * - El voltaje inicial máximo de la batería (medido sin carga de trabajo) es de 20 voltios. El voltaje nominal es 18... -
Precio: $1,081,199.00Expira: 05/04/2021
Clavadora Neumatica : Freeman PFL618BR 3-in-1 Pneumatic...
-Titulo Original : Freeman PFL618BR 3-in-1 Pneumatic Flooring Nailer Ergonomic & Lightweight Nail Gun for Flooring with Padded Grip Long Reach Handle & Interchangeable No-Mar Baseplates-Fabricante : Freeman Pneumatics-Descripcion Original: NAILED IT: This versatile 3-in-1 flooring nailer drives 3 types of fasteners without having to change the magazine: T-cleats, L-cleats & staples. It features no-mar interchangeable base plates for stability & protection against scratches to floor surfaces // PRO DESIGN: This nailer features a durable & lightweight aluminum body, long reach handle with padded grip. & heat-treated one-piece hardened steel driver blade. It comes with a carrying case, oil, wrenches, goggles, and a no-mar white rubber mallet. // THE RIGHT TOOL FOR THE JOB: We're committed to providing outstanding value, top tier customer service and long-lasting, high-quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between. // QUALITY & DURABILITY: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warranted in the USA // TOUGH & DEPENDABLE: We make an array of durable construction tools and accessories, including staplers & nailers for siding, flooring, framing, finish, & roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode & Dewalt. // Style: Product description Freeman PFL618BR Features: -3-in-1 Flooring gun with hard case. -Anodized aluminum magazine. -Air filter / anti dust cap. -One piece driver blade. -Interchangeable face plates. -White rubber mallet. -Durable plastic case. -Oil, goggles and wrenches included. -3-in-1 design fastening system. -7 Year limited warranty. -Dimensions: 22.75 H x 16.75 W x 3.5 D. Specifications: -Fastener gauge: 15.5 (staples) 16 (cleats). -Fastener range: 1.5 - 2 and 0.25 crown staples from 1.5 - 2. -Operating pressure: 70 - 115 psi. -Magazine capacity: 100 - 120 pcs. From the Manufacturer Freeman PFL618BR 3-in-1 flooring stapler, T-Cleat, and L-Cleat nailer combination is the work horse in the Freeman line-up. Our gun shoots both cleated nails and staples. It shoots 15.5- and 16-gauge staples ranging from 1 to 2 inches, and L/T cleats ranging from 1-1/2 inches to 2 inches. The 3-in-1 magazine has a capacity of 100-120 staples/cleats. The body of this gun is constructed of durable die-cast aluminum for job site dependability for daily use. It comes with two composite non-marring base plates for added stability and protection against scratches to the flooring surface. The interchangeable base plates allow you to install 1/2- to 3/4-inch nail-down flooring. It provides a convenient long reach handle with a padded grip. Internally, the driver blade is constructed of a very tough heat-treated one-piece hardened steel, aluminum cylinder, high quality rubber o-rings, and internal air filter. This tool comes with carrying case, oil, wrenches, goggles, and a no-mar white rubber mallet. This tool is manufactured under the strict guidelines for quality control. Each gun is tested before it is approved for shipping. Freeman Pneumatic line of nailers was developed with the professional in mind. Our company has worked diligently to develop a product that could meet the demands of the Professional customer and still hold true to the value associated with our product and its price point. Freeman guns are sold, distributed, serviced, and warranted by a US company, Prime Global Products, Inc. PGP is proud to offer our nailers to professionals and do-it-yourselfers alike. Freeman nail guns are backed by our 7-year limited warranty. If your Freeman tool ever needs service please read our warranty policy for complete details... -
Precio: $1,313,639.00
Clavadora Neumatica BOSTITCH 1-3/4(RN46)
-Titulo Original : BOSTITCH Coil Roofing Nailer, 1-3/4-Inch to 1-3/4-Inch (RN46)-Fabricante : Bostitch-Descripcion Original: La clavadora para techos en espiral de 3/4 de pulgada a 1-3 / 4 de pulgada con mecanismo de bloqueo evita el disparo cuando está vacía. Presión de funcionamiento: 70-120 psi Control de profundidad ajustable, controlador redondo completo, protectores de desgaste del cuerpo y del cargador, recipiente de carga lateral Puntas de aluminio y carburo duraderas pero ligeras para una larga vida útil. Ángulo del cargador: 15 grados Recipiente patentado de carga lateral de acción simple para una carga rápida de clavos en un solo paso. Guía de tejas ajustable para un espaciado rápido de teja... -
Precio: $1,136,699.00
Clavadora : Freeman PDX50C 3-in-1 Flooring Cleat...
-Titulo Original : Freeman PDX50C 3-in-1 Flooring Cleat Nailer and Stapler Ergonomic & Lightweight Nail Gun for Tongue & Grove & Hardwood Flooring, Uses T-Cleats, L-Cleats & Staples-Fabricante : Freeman Pneumatics-Descripcion Original: NAILED IT: This 3-in-1 flooring nailer uses 16-gauge T-Cleats and L-Cleats & 15.5-gauge flooring staples. It comes with Interchangeable base plates that make it perfect for both solid wood tongue & groove or engineered flooring from for 1/2" to 3/4" // PRO DESIGN: This durable nailer features an anodized aluminum magazine, no mar protection plate & self leveling front foot. It's ideal for solid wood tongue & groove flooring from 1/2" to 23/32" in thickness. Comes with a 3 pound fiberglass handle mallet // THE RIGHT TOOL FOR THE JOB: We're committed to providing outstanding value, top tier customer service and long-lasting, high-quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between. // QUALITY & DURABILITY: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warranted in the USA // TOUGH & DEPENDABLE: We make an array of durable construction tools and accessories, including staplers & nailers for siding, flooring, framing, finish, & roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode & Dewalt. // Style: Product Description The Freeman 3-in-1 Flooring Nailer/Stapler has the ability to equip 3 types of flooring fasteners (T-Cleats, L-Cleats and Staples) for the professional and do-it-yourselfer alike. The PDX50C is only 9.5 pounds, which will relieve some strain when working on long flooring projects. It is also equipped with an anodized aluminum magazine, no mar protection plate, air filter/anti-dust cap, one piece heat treated driver blade, self leveling front foot and high quality internal wearable parts. The PDX50C can be used on solid wood tongue and groove flooring measuring from 1/2-Inch to 23/32-Inch in thickness. The PDX50C is the first of its kind on the market due to several factors: overall weight, eliminates the need for a prefinished flooring adapter and comes standard with a 3 pound fiberglass handle mallet. Like all Freeman nailers, the PDX50C nailer/stapler is also backed by the Freeman 7 Year Limited Warranty. From the Manufacturer The Freeman 3-in-1 Flooring Nailer/Stapler has the ability to equip 3 types of flooring fasteners (T-Cleats, L-Cleats and Staples) for the professional and do-it-yourselfer alike. The PDX50C is only 9.5 pounds, which will relieve some strain when working on long flooring projects. It is also equipped with an anodized aluminum magazine, no mar protection plate, air filter/anti-dust cap, one piece heat treated driver blade, self leveling front foot and high quality internal wearable parts. The PDX50 can be used on solid wood tongue and groove flooring measuring from 1/2-Inch to 23/32-Inch in thickness. The PDX50 is the first of its kind on the market due to several factors: overall weight, eliminates the need for a prefinished flooring adapter and comes standard with a 3 pound fiberglass handle mallet. Like all Freeman nailers, the PDX50 nailer/stapler is also backed by the Freeman 7 Year Limited Warranty...
-
Precio: $255,329.00
Clavadora Neumatica : Freeman PBR32Q 1-1/4-Inch Brad Nailer.
-Titulo Original : Freeman PBR32Q 1-1/4-Inch Brad Nailer with Quick Jam Release and Depth Adjust-Fabricante : Freeman Pneumatics-Descripcion Original: Ideal for decorative trim, shoe molding, base board, crown molding, base molding, door and window casing, door installation, chair rail, hand railing and other projects // Quick Release for easy access clearing jams // Uses 18-Gauge straight brad nails ranging from 3/8-in to 1-1/4-in // Dual spring in-line magazine provides a consistent feed of fasteners to the drive blade // Reversible belt hook allows the tool to stay close by, but not in the way // Style: Product description 1' Brad Nailer with Quick Jam Release and Depth Adjust The Freeman PBR32Q 1-1/4 18 Gauge Brad Nailer is a professional quality, innovated home improvement tool. The Freeman Brad Nailer features an oil-free operation that requires no regular maintenance and eliminates the risk of stains on project surfaces. This brad nailer has a lightweight aluminum design and a tool-free adjustable exhaust that conveniently directs exhaust from your face, quick release nose for easy jamb clearing and tool-free depth adjust. This tool also comes equipped with Teflon o-rings, one piece drive blade, air filter, dust cap and dual spring magazine which makes the Freeman nailer the oblivious choice. The Freeman 18 gauge 1-1/4' Brad Nailer is great for interior and exterior finish and trim, furniture, cabinetry, crafts and hobbies. This nailer is manufactured under the strict guidelines to ensure professional quality. Features: 360 adjustable exhaust Anodized aluminum rail and cylinder Air filter/anti-dust cap One piece driver blade Reversible belt hook Co From the Manufacturer The Freeman PBR32Q is equipped with a 360-Degree adjustable exhaust, anodized aluminum cylinder, Teflon oil-less O-rings, one piece heat treated steel driver blade, finger-depth adjustment, no-mar tip, quick jamb release, anodized aluminum rail and an air filter/dust cap. The product also includes a reversible belt hook, oil, goggles and wrenches. The Freeman straight 1-1/4-Inch brad nailer has a lightweight aluminum design and a tool-free adjustable exhaust that conveniently directs exhaust away from your face. The 18-gram 1-1/4-Inch brad nailer is great for interior and exterior finish and trim, furniture, cabinet work, crafts and hobbies. This tool is manufactured under strict guidelines for quality control. Each gun is tested before it is approved for shipping. Freeman Pneumatic line of nailers was developed with the professional in mind. Our company has worked diligently to develop a product that could meet the demands of the professional customer and still hold true to the value associated with our product and its price point... -
Precio: $1,182,089.00
Clavadora Neumatica : BOSTITCH BTFP72156 Smart Point 15GA FN
-Titulo Original : BOSTITCH BTFP72156 Smart Point 15GA FN Style Angle Finish Nailer Kit-Fabricante : Bostitch-Descripcion Original: SMART POINT TECHNOLOGY: Easy nail placement due to a smaller nose and no need to compress the contact trip to actuate the tool. // DRIVES: 15 GA "FN" Style Angled Finish Nails from 1-1/4" to 2-1/2" length. // TOOL-FREE JAM RELEASE MECHANISM: For easy nail removal. // DIAL-A-DEPTH(TM) CONTROL: For precise countersinking of nails. // KIT INCLUDES: Nailer, 1/4" Air Fitting, Sample Fasteners, Carrying Case and Extra No-Mar Tips. // Highlights: Easy nail placement through small nose footprint Oil-free operation - eliminated risk of oil stains Tool-free jam release mechanism for ease of nail removal Dial-A-Depth control for precise countersinking of fasteners Swivel air fitting, internal air filter, rear exhaust, belt hook, integrated pencil sharpene... -
Precio: $1,207,269.00
Clavadora Neumatica : Makita An454 1-3/4 Coil Roofing Naile
-Titulo Original : Makita AN454 1-3/4 Coil Roofing Nailer-Fabricante : Makita-Descripcion Original: Faster nail driving speed for maximum performance // Aluminum housing for longer tool life // Lightweight design at only 5.2 lbs. // Easy, one-step open, adjustable canister system for faster, more precise nail loading // “Tool-less” depth adjustment dial for more precise control in flush nailing shingles // The Makita 1-3/4 roofing Coil nailer (model AN454) combines rugged construction and robust performance with less weight (only 5.2 lbs.). The AN454 accepts standard .120 shank diameter Coil roofing nails from 3/4” to 1-3/4” nails in length. The AN454 is engineered for longer tool life with durable and lightweight aluminum housing and an easy-loading adjustable canister. Ease-of-use features include a tool-less depth adjustment engineered for more precise control and flush nailing. Additional features include large carbide inserts on the nosepiece for long lasting performance. Oversized steel wear plates are engineered to reduce abrasion on the tool... -
Precio: $1,274,509.00
Clavadora Neumatica : Makita Af635 15 Gauge, 2-1/2 Angled..
-Titulo Original : Makita AF635 15 Gauge, 2-1/2 Angled Finish Nailer, 34⁰,-Fabricante : Makita-Descripcion Original: Powerful motor drives 15 gauge "DA" style angled finish nails from 1-1/4" to 2-1/2" // Magnesium body, aluminum MAGAZINE and cylinder deliver strength and durability // "Tool-less" depth adjustment for more precise flush and Countersink nailing // Nail lock-out mechanism protects tool and work surface from dry-fires // Built-in air duster provides convenient air flow to clear work surface // The Makita 15 gauge angled finish nailer (model AF635) offers an array of features and powerful performance in a compact size. The AF635 has a rear-loading magazine that accepts standard DA style (34⁰), 15 ga. Angled finish nails sized 1-1/4 to 2-1/2. the nail Lock-out and large windows alert the user when to reload nails as the contact arm and trigger are used together for controlled firing. With a compact size and weighing in at only 4 lbs., the AF635 was engineered for all-day professional use. Additional convenience features include a reversible belt hook that allows the tool to remain close-by, a multi-directional exhaust port that directs exhaust air away from the user, a built-in air Duster that provides convenient air flow to clear your workspace, and a 2-mode selector switch offering quick control over nailing operation...
-
Precio: $2,529,569.00
clavadora neumatica Dewalt Dw66c-1 15° espiral 2 1/2
-Titulo Original : DEWALT DW66C-1 2-1/2 Inch 15 Degree Coil Siding And Fencing Nailer-Fabricante : DEWALT-Descripcion Original: Dewalt Dw66c-1 Clavadora de cercas y revestimientos en espiral de 2-1/2 pulgadas y 15 grados - Carcasa de aluminio duradera y liviana (4,9 libras). El pie de goma suave ayuda a prevenir daños a la superficie de trabajo. - Revestimiento en espiral y revestimiento publicitario para cercas con escape ajustable sin herramientas - Fácil de usar Sobre enrollable para revestimiento y cercas con escape ajustable sin herramientas. Carcasa de aluminio duradera y liviana (4,9 libras). El pie de goma suave ayuda a prevenir daños a la superficie de trabajo. Gancho para viga ajustable sin herramientas para mayor comodidad. Impulsa alambres soldados y clavos en espiral insertados de plástico. Profundidad de ajuste sin herramientas para un ajuste preciso de los sujetadores. El cargador tiene capacidad para hasta 300 clavos. Presión de funcionamiento 70-120 psi. Incluye manuales... -
Precio: $679,719.00
Clavadora Neumatica : Metabo HPT NT65M2S Pneumatic Finish...
-Titulo Original : Metabo HPT NT65M2S Pneumatic Finish Nailer, 16 Gauge, 1-Inch up to 2-1/2-Inch Finish Nails, Integrated Air Duster, Selective Actuation Switch, 360-Degree Exhaust Portal, 5-Year Warranty-Fabricante : Metabo HPT-Descripcion Original: Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT // Accepts 16-gauge fasteners ranging from 1" up to 2-1/2" // Ergonomically designed simple flip actuation switch for easy transitions between bump fire or sequential fire modes // Integrated air duster button allows air from the compressor to bypass the nailing function and expel air from a hole in the front of the nailer // Tool-less depth of drive dial allows the user to easily adjust the drive depth for a professional finish // 360 degree, fully adjustable exhaust port directs air exhaust away from the user during use // No-mar tip protects the work surface from damage // Elastomer grip adds comfort and provides a secure hold // Style: The NT65M2S 16-gauge finish nailer features a non-slip elastomer grip trigger and ergonomically designed simple flip actuation switch. It is ideal for installing molding, chair rail, cabinetry and other fine finish applications. The nt65m2(s) accepts 16-gauge finish nails in lengths ranging from 1 Up to 2-1/2 And is equipped with an air Duster button to conveniently blow away dust and debris instantly to clear the work surface... -
Precio: $540,219.00
Bobina de clavos 1-3/4 x 0,092 a15° 3600un
-Titulo Original : Findmall Siding Nails 1-3/4-Inch X .092-Inch 15-Degree Collated Wire Coil Full RoundHead Ring Shank Hot-Dipped Galvanized 3600 Count For Rough Nailing Of Lathing And Sheathing Materials-Fabricante : Findmall-Descripcion Original: - Tamaño y cantidad: mide 1-3/4 pulgadas de largo por 0,092 pulgadas de diámetro y viene en un paquete de 3600. - Características estructurales - Full RoundHead y Ring Shank. - Material - Acero HDG. - Protección contra la corrosión: el material de fibrocemento galvanizado por inmersión en caliente ofrece una protección superior contra la corrosión en toda la madera tratada a presión. - Aplicación: los clavos en tiras de alambre se utilizan para el clavado basto de materiales de revestimiento y torneado. Descripción: Cantidad: 3600 Tamaño: 1-3/4 pulgadas x 0,092 pulgadas Grado: 15 Material: acero galvanizado en calient... -
Precio: $1,550,609.00
Clavadora Neumatica : Estwing Ef18glcn - 18 Gauge L-cleat..
-Titulo Original : Estwing EF18GLCN - 18 Gauge L-Cleat Pneumatic Flooring Nailer Ergonomic & Lightweight Nail Gun with No-Mar Baseplates for Tongue & Groove, Hardwood, Bamboo & Engineered Flooring-Fabricante : Estwing-Descripcion Original: NAILED IT: This flooring nailer uses 18-gauge L cleats to install 3/8” to 3/4” solid or engineered tongue & groove flooring, bamboo, exotic wood, or other dense flooring types. The no-mar base makes it safe to use on prefinished or unfinished flooring. // PRO DESIGN: This pneumatic nailer features durable, lightweight aluminum construction, light strike bumper, tool-free quick release to easily clear jams & interchangeable base plates enabling you to match flooring thickness for accurate fastener placement // THE RIGHT TOOL FOR THE JOB: We're committed to providing outstanding value, top tier customer service and long-lasting, high-quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between. // QUALITY & DURABILITY: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warranted in the USA // TOUGH & DEPENDABLE: We make an array of durable construction tools and accessories, including staplers & nailers for siding, flooring, framing, finish, & roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode & Dewalt. // Designed to stand up to the rigors of everyday use, the 18 Gauge L-Cleat Flooring Nailer is built with a hardened steel drive blade, rubber O-rings, and an aluminum body. The nailer features a light strike bumper, and comes with a lightweight fiberglass mallet. The white rubber head prevents marring when you move your flooring into place. On the rare occasion the nailer jams, the tool-free quick release makes it easy get back to work quickly. The 360 swivel Industrial NPT fitting gives you flexibility when moving around, and the air filter and anti-dust cap keep the tool’s interior clean and running smoothly. Each nailer comes with a padded bag with front and interior pockets. This flooring nailer can install 3/8” – ¾” solid or engineered tongue and groove flooring, bamboo, exotic wood, or other dense flooring. The no-mar base makes it safe to use on prefinished or unfinished flooring. This nailer is designed to use 18-gauge L-cleats ranging from 1 ¼” – 1 ¾” long. This flooring nailer is compatible with any brand L-cleats. The 18 GA L-Cleat Flooring Nailer (Model: EF18GLCN) is suitable for any professional or do-it-yourselfer. This flooring nailer is part of Estwing’s professional line of pneumatic tools, and is covered by a 5 Year Professional Tool Warranty and a 90 Day Wearable Parts Warranty...
-
Precio: $410,349.00
Clavos ,se Adapta A Nr83a5, Nr83a5 (s), Nr90ac5,..1000un
-Titulo Original : Metabo HPT 20111SHPT 3-1/4 x .131 21-Degree Pneumatic Framing Nails, Bright Smooth Shank Plastic Collated Nails, Fits NR83A5, NR83A5(S), NR90AES1, NR90AC5, NR90GR2, NR1890DR, 1000-Count-Fabricante : Metabo-Descripcion Original: Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT The smooth shank nail provides excellent holding power in most wood applications Plastic collating not likely to cause splitting of wooden materials Open nose design, for easy extraction of a jammed nai... -
Precio: $1,633,899.00
Clavadora Neumatica : BOSTITCH BTFP12569 2-in-1 Flooring...
-Titulo Original : BOSTITCH BTFP12569 2-in-1 Flooring Tool-Fabricante : Bostitch-Descripcion Original: DRIVES: 15.5 GA flooring staples or 16 GA "L" shaped flooring cleats from 1-1/2" to 2" length. // Has pneumatic driving action. Used in hardwood and engineered flooring // NON-MARRING BASE PLATES: For 1/2" (12.7 mm) through 3/4" (19.1 mm) flooring. // ERGONOMIC DESIGN: Has long handle with a comfortable rubber grip. // INCLUDES: Nailer, Interchangeable Base Plates, Mallet, Wrenches and 1/4" (6.4 mm) Air Fitting with Dust Cover. // The BOSTITCH BTFP12569 2-in-1 Flooring Tool drives 15.5ga staples and 16ga cleat nails from 1-1/2 to 2 length. It features mallet actuated pneumatic driving action, along with non-marring, interchangeable base plates. This tool is ergonomically designed with longer handle and comfortable rubber grip and is lightweight at 10.85 lbs. Low air requirements at 3.7 SCFM. Designed for hardwood and engineered flooring installation, which helps eliminate gaps between flooring boards. For 1/2 (12.7 mm) through 3/4 (19.1 mm) flooring, ready to use out of box. Includes Tool, Mallet, Oil, Wrenches, 1/4 (6.4 mm) air fitting... -
Precio: $1,120,259.00
Clavadora Neumatica : Freeman PCN50 15 Degree Coil Siding...
-Titulo Original : Freeman PCN50 15 Degree Coil Siding Nailer, 2-Fabricante : Prime Global Products-Descripcion Original: No-mar tip helps prevent damage to work surface/Includes 2nd no-mar tip // Tool less depth adjustment for handling a variety of materials // Side loading canister and quick driving for efficiency // Contact fire for safe and precise fastening // Shoots 15-degree nails ranging from 1 in. to 2 in // The Freeman Pneumatic PCN50 15Degree Coil Siding and Fencing nailer is built for speed and durability. This coil nailer uses all brands of 15Degree wire or plastic collated nails ranging in length from 1 - 2, .83 -.98 in diameter. The 15-Degree Siding Nailer can handle cedar shingles, roof and wall sheathing, siding installation and fencing. This nailer is a smaller/lighter version of its big brother, the Freeman PCN65 making it more user friendly on jobs requiring a nail 2 or less; why carry a brick when a pebble will do? The nailer features tool-free depth adjustment for fastening a wide variety of materials, side and front impact bumpers for safety, 360-degree adjustable exhaust, bump fire trigger, clear bucket to always know how many fasteners you have, two no-mar tips, belt hook, 1/4 NPT Milton air connector and made of lightweight and durable die-cast magnesium. The total package is backed by Freeman 7 Year Warranty... -
Precio: $1,614,579.00
Clavadora Neumatica : Bostitch N66c-1 1-1/4-inch To...
-Titulo Original : BOSTITCH N66C-1 1-1/4-inch to 2-1/2-inch Coil Siding Nailer with Aluminum Housing-Fabricante : Bostitch-Descripcion Original: N/A // Made in USA // Drives wire weld and plastic inserted coil nails. Magazine Capacity : 300 // Adjustable depth guide sets nails to desired depths quickly and conveniently // Lightweight aluminum design for added durability // Soft rubber foot prevents damage to softer woods // Tool-free adjustable exhaust conveniently directs exhaust away from the user // Style: Product Description Adjustable depth guide sets nails to desired depths. Lightweight magnesium housing design for durability. Soft rubber foot prevents damage. Tool-free adjustable exhaust conveniently directs exhaust away from the user. Specs: Tool Weight: 4.7 lb; Height : 14.96; Air Inlet Size: .25; Operating Pressure: 70-120 PSI: Fastener Specifications: 15 Degree Wire Weld & Plastic Inserted Coil Siding Nails (1 1/4 - 2 1/2). Includes: Carrying Case. Amazon.com Nail down siding in no time with the powerful, precise Bostitch N66C-1 Coil Siding Nailer. This lightweight tool features a aluminum housing that makes it durable enough to repeatedly withstand the rigors of all-day use. And with adjustable nail depth and a soft rubber foot, you can work with a range of siding materials, including soft woods. The N66C-1 Siding Nailer works with any air compressor and has a tool-free adjustable exhaust that directs spent air away from you when you're working. 515 in./lbs. of driving power Adjustable nail depth Lightweight, durable aluminum housing Tool-free adjustable exhaust Pretty much no matter what type of siding you're working with, the N66C-1 will take care of the job. This nailer accepts both wire-weld and plastic-inserted coil nails and includes a soft rubber foot that's perfect for working with soft wood. Additionally, the N66C-1 can handle the tough stuff: cement, clapboard, fencing, and even light-gauge steel are no problem. The N66C-1 has an adjustable guide and an operating range of 70 to 120 PSI, which means you can dial in the right depth for the job. And with driving power of 515 in/lbs, the N66C-1 can be easily set for 1-1/4-inch to 2-1/2- inch nails. Additionally, the N66C-1 has a 350-nail magazine, so you can knock out plenty of work in a single load. The N66C-1 Siding Nailer works with any air compressor and has a tool-free adjustable exhaust that directs spent air away from you when you're working. Finish the job without breaking a sweat. The N66C-1 Siding Nailer is constructed with aluminum, which means it is light enough to wield all day. Measuring just 3.25 x 12 x 11.25 inches (WxHxL) and weighing just 4.9 pounds, this nailer is still durable enough to withstand the wear and tear of any jobsite. The N66C-1 stores in its included protective carrying case when not in use. The Bostitch N66C-1 Coil Siding Nailer is covered by a seven-year limited warranty. Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts. Siding nailer and carrying case....
-
Precio: $1,096,439.00
Clavadora Neumatica : Grex P635 23 Gauge 1-3/8-Inch Length..
-Titulo Original : Grex P635 23 Gauge 1-3/8-Inch Length Headless Pinner-Fabricante : Grex Power Tools-Descripcion Original: Powerful motor penetrates fasteners through the hardest materials // Shoots fasteners up to 1-3/8-inch length easily, even-inch hardwoods // Patented design eliminates need to adjust for different fastener lengths // Double trigger safety prevents accidental firing of tool // Narrow nose reaches tight areas and corners for detailed trim work // Amazon.com For finishing, detailed woodworking, and fastening of delicate, thin, and small wood pieces without splitting, the Grex P635 Headless Pinner makes the process of pinning easy. This innovative tool accommodates long pins up to 1-3/8 inches for a strong hold, and the magazine self-adjusts to different fastener sizes, so you'll never need to make any adjustments for pin lengths. Powerful enough to penetrate hardwoods, the P635 works securely with a built-in double-trigger safety. Ideal for detailed woodworking and finish work, the P635 gives you the flexibility and power you need to tackle a host of pinning jobs. Equipped with an industrial-strength motor, this pinner easily penetrates hardwoods such as oak and beech. And even with its high-power performance, the P635 allows for fastening of delicate, thin, and small wood pieces without splitting--something that's simply not possible with larger fasteners. The magazine auto-adjusts to the different fastener sizes, quickly pushing pins to the necessary position. Unlike old-style pinners, the P635 does not require you to make any adjustments for the pin lengths; it's an easy load-and-go tool for quick, convenient, and trouble-free loading and reloading.The pinner's broad fastener range accepts pins from 3/8 inch to 1-3/8 inches in length--nine different sizes--making it the perfect go-to gun. Plus, the P635's fastener capacity is one strip (approximately 100 pins), letting you work with little interruption.For its innovative features, the P635 has been named one of the Best New Tools in the December 2005 issue of Popular Woodworking and the Best Bet of headless pinners in the April 2007 issue of Woodworker's Journal. The P635 has also been listed in Taunton's Tool Guide as the Readers' Choice two years in a row (2008 and 2009). Weighing only 2.21 pounds, the P635 keeps you working comfortably when you're performing extended or overhead pinning jobs. And with its narrow nose and short length (less than eight inches), this pinner is perfect for accessing tight spaces, and the rear cut-away magazine helps the tool reach into corners.If you frequently perform detailed trim work, this pinner's compact design gives you the control and flexibility you need to create an attractive finished product. And for jam clearing, the P635's removable nose cover provides easy access. The hex key to remove the nose cover is conveneiently stored on the rear of the magazine. If you want to avoid visible holes or splits in a finished piece, the P635 is a great choice. The pinner is similar to a finish or brad nailer, but it uses smaller nails, so it fires fasteners that hardly leave a trace. Despite being a very thin headless fastener, the tool uses 23-gauge headless pins that provide a significant amount of holding power when driven in correctly. And because the pins leave holes that are practically invisible, there is no need for puttying and sanding. This means you'll achieve better-looking results while saving time.The P635 also makes it possible to fasten pre-finished material. The removable no-mar tip works with smooth precision, so do-it-yourselfers and professionals alike can enjoy clean, expert results.For added security and control, the pinner is built with a double-trigger safety, which prevents accidental firing. To fire a pin, you simply pull back the safety trigger and then engage the pinning trigger. For added convenience, the pinner includes quick access magazine storage for the wrench, magazine angled cut-off, and a fastener indicator that lets you know when reloading is necessary.And to ensure a more relaxed work environment, the P635 has a rear-exhaust system with a built-in silencer, which directs the tool's exhaust away from the user and reduces the noise to a comfortable minimum. Constructed mostly of metal--with a hardened steel driver and nose piece, aluminum internal parts, aluminum housing, and aluminum extruded magazine assembly--this tool is built to last. And with a convenient belt hook, the pinner is easy to carry with you wherever you go. The P635's many capabilities give you the freedom to use it in a variety of situations, covering your pinning needs everywhere from craft shops to construction sites. Grex recommends the pinner for the following applications: finishing, molding, decorative trimming, lightweight paneling, dowel and joint pinning, window beading, display and sign creation, and assembly of mirrors, picture frames, rattan furniture, and more. Grex P635 23-Gauge, 1-3/8-Inch-Length Headless Pinner, plastic carrying case, bottle of tool lubricant, set of hex keys, and owner's manual. From the Manufacturer The Grex P635 23-gauge 1-3/8-inch length headless pinner is the only industrial strength pinner offering a patented self-adjusting magazine that accommodates fasteners from 3/8-inch up to 1-3/8-inch, a total of nine different lengths. Equipped with an extended narrow nose to access corners and tight areas with precision, this lightweight pinner is designed ideally for intricate finishing and trim work that allows secure fastening of the smallest decorative trim with a nearly invisible hole - no splitting or puttying. It has been hailed as The Lexus of Pinners by Wood magazine and 2005 Best New Tool in Popular Woodworking. Along with its additional convenient features, this tool is truly The only pinner worth having... -
Precio: $1,885,079.00
Clavadora Neumatica : Dewalt Dwfp12569 2-n-1 Flooring Tool
-Titulo Original : DEWALT DWFP12569 2-N-1 Flooring Tool-Fabricante : Dewalt-Descripcion Original: Lightweight at 10.6 lbs for better balance and control // Optimized for the most popular solid flooring fasteners, 15.5ga Staples and 16ga “L” Cleat Nails // Interchangeable, Non-marring base plates adjust to all sizes of flooring // Ergonomically designed with longer handle and comfortable rubber grip for ease of use // Lower CFM requirements for less compressor run-time // From 1924 to 2016 DeWalt continues to design and optimize professional workhorse solutions- tools, accessories and service - to ensure absolute confidence for the toughest jobsite conditions. We are DeWalt (Dewe2), and we are guaranteed tough. Includes mallet, oil, wrenches, 1/4 (6.4 mm) air fitting with dust cove... -
Precio: $565,079.00
Clavos para enmarcar a 30°de 2 3/8 X.113 2000un
-Titulo Original : Paslode, Framing Nails, 650603, 30 Degree RounDrive Brite, 2 3/8 Inch X.113 Gauge, Ring, 2,000 Per Box-Fabricante : Paslode-Descripcion Original: - Potente - Diseño de cabeza redonda reforzada para un mejor rendimiento de conducción en los materiales más duros. Descarga de clavos para comunicar un clavado uniforme - Preciso - Se une con fibras de madera para aumentar el poder de sujeción - Productivo: un 10 % más de clavos por tira significa menos recarga - Compatibilidad - Los clavos Paslode están optimizados para trabajar con herramientas Paslode; Clavadora inalámbrica XP o PowermasterPlus - Limpieza: la clasificación de la cinta de papel significa que no hay residuos en el lugar de trabajo para limpiar Descripción del producto Nuestros clavos líderes en la industria están diseñados y fabricados para coincidir con las especificaciones de las clavadoras Paslode para que su clavadora funcione sin problemas, con menos fallos de encendido y atascos mientras se coloca al ras, incluso en los materiales más duros. Del fabricante 2 3/8 pulgadas por .113 RS 2m Brit... -
Precio: $570,189.00
Clavadora Neumatica : Hitachi NT65M2S 16-Gauge Finish Nailer
-Titulo Original : Hitachi NT65M2S 16-Gauge Finish Nailer with Integrated Air Duster, 2-1/2-Inch, Silver (Discontinued by the Manufacturer)-Fabricante : Hitachi-Descripcion Original: Tool-less depth of drive dial allows the user to easily adjust the drive depth for a professional finish // Integrated air duster button allows air from the compressor to bypass the nailing function and expel air from a hole in the front of the nailer allowing the user to clear away dust and debris from the work surface // Elastomer grip adds comfort and provides a secure hold // Ergonomically designed simple flip actuation switch for easy transitions between bump fire or sequential fire modes // Tool-less, easy-to-clear nose for quick and simple nail extraction should a nail jam during use // No-mar tip protects the work surface from damage // 360 degree, fully adjustable exhaust port directs air exhaust away from the user during use // Style: Product Description The NT65M2(S) 16-gauge finish nailer features a non-slip elastomer grip trigger and ergonomically designed simple flip actuation switch. It is ideal for installing molding, chair rail, cabinetry and other fine finish applications. The NT65M2(S) accepts 16-gauge finish nails in lengths ranging from 1 up to 2-1/2 and is equipped with Hitachi's signature air duster button to conveniently blow away dust and debris instantly to clear the work surface. Includes Safety Glasses (875769), 1/4 NPT Male Plug (190001), No Mar Tip (881751), Carrying Case (885676) Amazon.com The Hitachi 16-gauge finish nailer is designed to meet the needs of the advanced do-it-yourselfer or the professional trim carpenter. This model's built-in air duster button permits air from the compressor to bypass the nailing function, so you can clear away dust from your work surface for better nail prep and a clearer view of your work area. Its compact, lightweight style is easy to hold and easy to aim, for precision nail placement that won't wear out your arms. Use this versatile nailer when installing molding, chair rails, cabinetry, or other fine finish applications. The NT65M2 comes ready to work, with a selective actuation switch that lets you fire sequentially or on contact, depending on the job and the application -- and no tools or additional parts are required to make the change. It also has a tool-less, easy-to-clear nose that makes removing nail jams simple, plus a tool-less depth of drive dial that adjusts for flush fastening in a variety of materials. If you want superior control and a professional-looking finish, this is the easiest way to get it. This nailer features a 360-degree, fully-adjustable exhaust port that blows air away from your face, a no-mar tip to protect your work surfaces, and an elastomer grip for better control and accuracy. It accepts fasteners from 1 to 2-1/2 inches, 16-gauge. It weighs only 3.7 pounds. It operates at 70-120 psi, and the magazine holds up to 100 fasteners. This model comes with safety glasses, a tool fitting, no-mar tip, hex bar wrench, and a case. Hitachi 16-gauge finish nailer, tool fitting, safety glasses, no-mar tip, hex bar wrench, case. For small household jobs, an old-fashioned hammer is the perfect stand-by. But if you've got a bigger project on your to-do list, then a pneumatic power nailer could be your new best friend. Pneumatic nailers are a great alternative to traditionally powered nailers, because they're capable of providing more power -- and they operate with fewer moving parts, so a pneumatic nailer can take more abuse than its corded or battery-run cousins. All pneumatic tools require a steady supply of controlled, compressed air in order to work properly, and nailers are no exception. Bigger compressors with hardy motors and large tanks generate higher PSI levels and maintain them longer, so you'll probably want a piston-type, two-stage compressor to power your nailer. Smaller or single-stage models are fine for little projects, but if you need a pneumatic nailer, the odds are good that you're looking for some intense PSI and CFM ratings. Sometimes, a pneumatic nailer will come with its own compressor -- or it can be purchased as part of an air tool set. Pneumatic nailers use compressed air power to cock and release the hammer. In order to fire a fastener, a valve opens to let air fill a cylinder -- which has a piston that's driven down hard and fast. This forces the nail out of the gun and into your workpiece. Then the piston recoils, and another nail is loaded. Check manufacturer's guidelines to find out what pressure (PSI) and volume (CFM) of air will give your pneumatic nailer the best results. Also, keep in mind that any restrictions on the air hose will diminish the tool's performance. Hoses that are very long, contain too much moisture, or are incorrectly sized will reduce air flow. This can prematurely wear out your tool and cause it to perform poorly. Most models will feature a rubber nosepiece to prevent scuffing and marring of your workpieces, plus an exhaust system (rear or adjustable) to keep sawdust and debris out of your face and away from your project. Pneumatic nailers usually have an adjustable depth of drive, and depending on the model, they can accommodate nails up to 2-1/2 inches long, in a variety of different gauge sizes. With a powerful enough compressor behind them, they can shoot thousands of nails a day. See all Product descriptio...
Mostrar del 1 al 24 (de 83 productos)