Arriba

Herramientas > Eléctricas y Neumáticas > Engrapadoras y Clavadoras

Mostrar: 
Mostrar del 1 al 24 (de 76 productos)
Páginas de Resultados:  1  2  3  4  [Siguiente >>] 
  • Clavadora Neumatica : B&C Eagle SN3490 2-Inch to 3-1/2-Inch.
    Precio:  $83,999.00
    Expira: 22/03/2021

    Clavadora Neumatica : B&C Eagle SN3490 2-Inch to 3-1/2-Inch.

    -Titulo Original : B&C Eagle SN3490 2-Inch to 3-1/2-Inch Paper Tape 31 to 34 Degree Framing Nailer-Fabricante : B & C Eagle-Descripcion Original: Rear load magazine // Adjustable exhaust deflector (tool free 360 Degree) // Weight: 7.0lbs // Toe nail safety with removable No-Mar tip // Selectable trigger sequential to contact trip actuation // From the Manufacturer The B&C Eagle SN3490 paper tape framing nail gun features a lightweight aluminum housing without compromising the power needed to drive a 2-inch to a 3-1/2-Inch framing nail. With a soft rubber grip, the tool offers comfort and stability without increasing fatigue. The SN3490 has a built-in trigger selection which allows you to choose quickly and easily between single fire and bump fire nailing. The SN3490 has a convenient rear load magazine to replenish quickly to avoid loss of time. Other SN3490 convenient features include a tool free adjustable depth of drive, connected rafter hook and a no-mar tip. A 360 degree directional cap gives you the freedom to direct the flow of the exhaust away from your face while working. The B&C Eagle framing nail gun is also equipped with a built in air filter to trap dirt from the inside of the tool keeping it clean during use and then expelling some of the debris once it is unplugged from the air source. The low nail lock out feature indicates when re-loading is required without the added tool wear and wasted time of dry firing. All of these items combined make the B&C Eagle SN3490 the ideal tool to accomplish all of your framing needs. The SN3490 works with clipped head or offset full head paper tape collated framing nails, 2-Inches to 3-1/2-Inches in length. Look for B&C Eagle 33 degree series (Red label) offset or clipped head paper tape strip framing nails...
  • Clavadora Neumatica : Metabo HPT NV83A5 Pneumatic Coil...
    Precio:  $138,139.00

    Clavadora Neumatica : Metabo HPT NV83A5 Pneumatic Coil...

    -Titulo Original : Metabo HPT NV83A5 Pneumatic Coil Framing Nailer, 2-Inch up to 3-1/4-Inch Round Head Coil Nails, Tool-less Depth Adjustment, 16 Degree Magazine, Hardened Claw Tip, Rafter Hook, 5-Year Warranty-Fabricante : Metabo HPT-Descripcion Original: Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT // Cylinder valve drive system for rapid response and increased durability // Selective actuation on trigger allows for either sequential or contact nailing // Rafter hook is included for convenience on the jobsite // Side load pop-out magazine for fast and easy reloads // Open nose design for easy extraction of a jammed nail // Ergonomic non-slip rubber grip on handle helps maintain a secure hold and comfort during use // Hardened claw tip resists wear on the nose and minimizes slippage when driving at an angle or "toe-nailing" // The NV83A5 Round head Coil framing nailer is used for construction work such as wall sheathing, roof decking, subflooring, Mobile and modular home construction, making of wooden boxes, pallets and drums, packing operations in manufacturing plants, and for other types of general Packing and crating work. The NV83A5 is like the original NV83A that you have Come To trust, but now with an improved trigger design and sharing all the same internal parts as the original NV83A. The NV83A5 relies on the same cylinder valve drive system as the NV83A, which offers both rapid response and great driving power...
  • Clavadora Neumatica De Palma Metabo Hpt Nh90ab 2-1/2 -3-1/2
    Precio:  $13,649.00

    Clavadora Neumatica De Palma Metabo Hpt Nh90ab 2-1/2 -3-1/2

    -Titulo Original : Metabo HPT NH90AB Palm Framing Nailer, 360 Degree Swivel Fitting, Accepts 2-1/2-Inch to 3-1/2-Inch Bulk Framing Nails, Over-molded Rubber Grip, Ideal for Joist Hangers & Metal Connectors-Fabricante : Metabo HPT-Descripcion Original: Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT // 360 degree swivel fitting for maximum maneuverability and ease of use // Magnetic nose holds a fastener in place for safe and accurate fastener placement // Front exhaust directs the air away from the user // Over-molded rubber grip for added comfort, better hold and reduced vibration // Accepts a 2-1/2" - 3-1/2" bulk nail // Lightweight at only 1.3 lbs // Ideal for installing joist hangers and metal connectors // Style: The NH90AB 3-D/2 Palm nailer accepts a 2-1/2 - 3-D/2 Bulk fastener, while Offering superior maneuverability when working in confined areas. It is ideal for installing joist hangers and metal connectors. Its 360 degree swivel Plug allows the hose to hang at any angle instead of straight out adding convenience when working in tight spaces. The over-molded rubber grip provides comfort, absorbs vibration and improves control...
  • Clavadora : Freeman PF18GLCN 18-Gauge Cleat...
    Precio:  $94,829.00

    Clavadora : Freeman PF18GLCN 18-Gauge Cleat...

    -Titulo Original : Freeman PF18GLCN 18-Gauge Cleat Flooring Nailer for Bamboo and Exotic Flooring Ergonomic & Lightweight Pneumatic Nail Gun with No-Mar Foot for Hardwood Flooring-Fabricante : Prime Global Products-Descripcion Original: NAILED IT: This pneumatic flooring nailer features a lightweight aluminum body, ergonomic comfort grip handle, light strike bumper & 3 interchangeable base plates. The no-mar foot will protect the surface from scratches & is safe for pre-finished flooring // PERFECT FOR HARDWOOD FLOORING: This cleat flooring nailer drives 18 gauge L-cleats, ideal for installing dense flooring like strand woven bamboo, Brazilian teak, cherry, engineered flooring and other exotic hardwoods. Magazine holds up to 120 fasteners. // THE RIGHT TOOL FOR THE JOB: We're committed to providing outstanding value, top tier customer service and long-lasting, high-quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between. // QUALITY & DURABILITY: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warranted in the USA // TOUGH & DEPENDABLE: We make an array of durable construction tools and accessories, including staplers & nailers for siding, flooring, framing, finish, & roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode & Dewalt. // The Freeman 18ga L Cleat Flooring Nailer offers an affordable solution for the professional and do-it-yourselfer for installation of hardwood floors such as Bamboo, Teak and other exotic woods. The drive blade is made of hardened steel with an aluminum cylinder and high-quality rubber O-rings. The body of the nailer is constructed of die-cast aluminum to stand up to the task of daily use. Generic L Cleats may be used with this model, however Freeman L Cleats are recommended. This nailer comes with 3 different sized base plates that provide stability and will protect the surface from scratches. Oil, wrenches, fiberglass mallet with a white, no-mar head, and user manual are included, backed by Freeman’s 7 year limited manufacturer’s warranty...
  • Clavadora Neumatica : Bostitch F21pl Round Head 1-1/2-inch.
    Precio:  $80,629.00

    Clavadora Neumatica : Bostitch F21pl Round Head 1-1/2-inch.

    -Titulo Original : BOSTITCH F21PL Round Head 1-1/2-Inch to 3-1/2-Inch Framing Nailer with Positive Placement Tip and Magnesium Housing-Fabricante : Bostitch-Descripcion Original: Compressor/Air Tool Features: Fastener Collation,Fastener Depth Control, 1-1/2-inch to 3-1/2-inch framing nailer; 1,050 inch-pounds of driving power; sequential and bump trigger // 2 nailers in one: includes two quick-change nosepieces, converts to framing or metal connector applications // Lightweight magnesium housing; integrated rubber skid pads; rubber grip // Includes 1 framing nailer; Power Source: Pneumatic // 14-1/4 by 20-1/2 inches; 8.1 pounds // 1-1/2-inch to 3-1/2-inch framing nailer; 1,050 inch-pounds of driving power; sequential and bump trigger // 2 nailers in one: includes two quick-change nosepieces, converts to framing or metal connector applications // Style: Product Description The product is RND Head Framing Nailer. Easy to use. The product is manufactured in China. Amazon.com The Bostitch F21PL Round-Head Framing Nailer is the ideal tool for framing, sheathing, subflooring, and bracing jobs. Perfect for professionals and weekend warriors alike, this nailer features a strong, lightweight magnesium body, quick-change nosepieces for plastic-collated and metal-connector nails, a 16-inch layout indicator, and more. 1,050 in./lbs. of driving powerQuick-change nosepieces for framing and metal connector nailsPatented push-button adjustable nail depthRecommended for use with HurriQuake nails The recommended tool for use with HurriQuake disaster-resistant nails, the F21Pl has a patented feature that lets you set nail depth with the simple push of a button. For further convenience, quick-change nosepieces let you switch from plastic-collated framing nails to metal connector nails in seconds.The high-capacity magazine holds up to 60 plastic collated 21-degree framing nails (2.0-3.5 inch) or 60 metal connector nails (1.5-2.5 inch). Its 16-inch layout indicator, located on the magazine, lets you know at a glance the correct distance between studs.And with an adjustable rafter hook, you can conveniently hang the nailer on joists and rafters during work breaks. The magnesium construction of the F21PL Round-Head Framing Nailer means this tool is light enough to use all day, while still being strong enough to reliably use again and again. It also means that this tool has the best power-to-weight ratio in its class: 1,050 in./lbs. to 8.1 pounds.The Bostitch F21PL Round Head Framing Nailer works with a standard air compressor and is backed by a seven-year limited warranty. Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts. Framing nailer and two quick-change nosepieces. See all Product descriptio...
  • Clavo de acabado de 1-1 / 2 por calibre 16 DEWALT DCS16150
    Precio:  $5,799.00

    Clavo de acabado de 1-1 / 2 por calibre 16 DEWALT DCS16150

    -Titulo Original : DEWALT DCS16150 1-1/2-Inch by 16 Gauge Finish Nail (2,500 per Box)-Fabricante : DEWALT-Descripcion Original: Consistent drivability for applications Box contains 2,500 durable and reliable nails Made of cold-worked carbon steel and galvanized in a hot-dip Each nail resists rust and moisture process Ideal for finish wor...
  • Clavadora Neumatica : Senco Finishpro 18mg, 2-1/8 18-gauge.
    Precio:  $29,529.00

    Clavadora Neumatica : Senco Finishpro 18mg, 2-1/8 18-gauge.

    -Titulo Original : SENCO FinishPro® 18MG, 2-1/8 18-Gauge Brad Nailer (ProSeries)-Fabricante : Senco-Descripcion Original: This product is easy to use // This product is highly durable // This product is manufactured in China // Ultra-Light & Durable // Oil-Free Design // Selective Trigger // Adjustable Depth-of-Drive // Rear exhaust // Fip18mg's magnesium body delivers an ultra light tool with Senco dependability and the power to drive up to 2 1/8 Brads...
  • Clavadora Neumatica : Fasco 11706F Pneumatic Pinner
    Precio:  $70,419.00

    Clavadora Neumatica : Fasco 11706F Pneumatic Pinner

    -Titulo Original : Fasco 11706F Pneumatic Pinner-Fabricante : Fasco-Descripcion Original: Use with 23-gauge pins and Brads from 12 to 50-millimeter // Anti dry Fire lock-out mechanism // Safety double trigger // Light, very powerful // Use with 18-gauge headless pin/Brad // This Bradder/pinner is used for 23-gauge pins and Brads from 12 to 50-millimeter...
  • Clavadora Neumatica : Makita AF601 16 Gauge, 2-1/2 Straight.
    Precio:  $70,629.00

    Clavadora Neumatica : Makita AF601 16 Gauge, 2-1/2 Straight.

    -Titulo Original : Makita AF601 16 Gauge, 2-1/2 Straight Finish Nailer,-Fabricante : Makita-Descripcion Original: Efficient motor design offers leading power performance // Nail lock-out mechanism protects tool and work surface from dry-fires // "Tool-less" depth adjustment for more precise flush and Countersink nailing // Built-in air duster provides convenient air flow to clear work surface // 2-mode selector switch for control over nailing operation // The Makita 16 gauge straight finish nailer (model AF601) combines a myriad of features and powerful performance in a compact size. The AF601 has a rear-loading magazine that accepts standard 16 ga. Straight finish nails sized 1 to 2-1/2. the nail Lock-out and large windows alert the user when to reload nails as the contact arm and trigger are used together for controlled firing. With a compact size and weighing in at only 3.8 lbs., the AF601 was engineered for all-day professional use. Additional convenience features include a reversible belt hook that allows the tool to remain close-by, a multi-directional exhaust port that directs exhaust air away from the user, a built-in air Duster that provides convenient air flow to clear your workspace, and a 2-mode selector switch offering quick control over nailing operation...
  • Clavadora Neumatica : Grip-Rite GRTMP16 Mini Palm Nailer
    Precio:  $17,479.00

    Clavadora Neumatica : Grip-Rite GRTMP16 Mini Palm Nailer

    -Titulo Original : Grip-Rite GRTMP16 Mini Palm Nailer-Fabricante : Grip-Rite-Descripcion Original: Shoots up to a 16d nail // Powerful compact design // Lightweight at only 1 lb // 70 Percent lighter and smaller than similar palm-sized air nailers // Magnetic nose // Product description Grip Rite Grtmp16 Palm Nailer Mini 16D Amazon.com With all the functionality of a full-sized palm nailer at one-third the size and weight, the Grip-Rite GRTMP16 Mini Palm Nailer fits into tight spaces where a full-sized palm nailer can't. It drives up to a 3-1/2-inch 16d nail without creating hammer marks, and it features a magnetic nose to hold the nail in place, so you get accurate placement every time.Mini palm nailer drives up to a 3-1/2-inch 16d nail in tight spaces One-third the size and weight of full-sized palm nailers for minimized fatigue Magnetic nose for accurate nail placement Complete kit comes with metric hex wrench, air tool oil, and male air plug Backed by a one-year warranty The compact Grip-Rite Mini Palm Nailer is designed to handle framing, hurricane straps, fencing, decking, and other nailing jobs in tight areas. Because it weighs just one pound, the tool is comfortable to operate for long periods without fatigue. Its compact size also makes it easy to store. A magnetic nail holder keeps each safely in place during positioning to free up one of your hands. One you've set the nail, the Mini Palm Nailer accurately delivers multiple hammer blows until the nail is fully driven. Included with the Grip-Rite Mini Palm Nailer is everything you need for immediate operation and maintenance, including a metric hex wrench to tighten screws, air tool oil for proper lubrication of O-rings and internal parts, and a male air plug. Since introducing its fasteners in 1975, Grip-Rite has become a major manufacturer of pneumatic fastening systems, fencing and wire goods, steel and poly products, building materials, and concrete accessories. The company's materials are used in a variety of home improvement and remodeling projects throughout the world. Mini palm nailer, metric hex wrench, air tool oil, and male air plug. See all Product descriptio...
  • Clavadora Neumatica : Senco PC0781 Pneumatic Palm Nailer
    Precio:  $26,929.00

    Clavadora Neumatica : Senco PC0781 Pneumatic Palm Nailer

    -Titulo Original : Senco PC0781 Pneumatic Palm Nailer-Fabricante : Senco-Descripcion Original: Drives bulk nails from 5d to 70d // Balanced 2.5 pound weight // Soft rubber palm pad for comfortable grip // Magnetic nail guide for faster and easier driving // Leather grip reduces fatigue // Product Description Fits into the palm of the hand making it ideal for joust hangers, metal straps, and pole barn assembly. Leather grip with soft rubber palm pad reduces fatigue. Magnetic nail guide for faster and easier driving. Specifications: 50 - 125 psi (3.5-8.4 bar); Height: 5.8; Weight: 2.4 lbs. Fastener Specifications: Drives Bulk Nails from 5d to 70d. Includes: Leather grip.. Drives Bulk Nails From 5D To 70D. Balanced 2.5 Pound Weight. Soft Rubber Palm Pad For Comfortable Grip. Magnetic Nail Guide For Faster And Easier Driving. Leather Grip Reduces Fatigue Amazon.com Here's a handy little nailer at a great price. Palm nailers have their fans, and if you're one of them, you'll like this model. Its 2.5 pounds are well-balanced and made even easier to handle because of the soft rubber palm pad and nice leather grip. One downside of palm nailers is the need to feed each nail individually, but the A20 features a magnetic nail guide that speeds up your driving. It's ideal for joust hangers, metal straps, and pole barn assembly. The home do-it-yourselfer will like it because it eliminates the dimpling that always goes along with hand nailing. Just a little pressure activates the firing mechanism for trouble-free fastening.--Kris Jensen-Van Heste See all Product descriptio...
  • Clavadora Neumatica : BOSTITCH PN50 Mini Impact Nailer
    Precio:  $14,559.00

    Clavadora Neumatica : BOSTITCH PN50 Mini Impact Nailer

    -Titulo Original : BOSTITCH PN50 Mini Impact Nailer-Fabricante : Bostitch-Descripcion Original: Rubber grip designed to insulate and reduce vibration // Weighs only 1 lb. // 360° swivel air fitting for maximum accessibility // Front exhaust directs air away from users palm // Drives most common bulk finish, framing & timber nails // Product Description BOSTITCH PN50 Mini Impact Nailer From the Manufacturer The Bostitch PN50 Mini Impact Nailer has a rubber grip designed to insulate and reduce vibration. Lightweight at only 1 lb. It has a 360° swivel air fitting for maximum accessibility in tight spots. The front exhaust directs air away from users palm. Drives Most Common Bulk Finish, Framing & Timber Nails. Ideal in applications such as; Joist Hangers, Metal Connectors, and Driving Nails Into Confined Areas...
  • Clavos  BOSTITCH, Bright, 1-1/4-Inch, 16GA, 1000 unidades
    Precio:  $4,329.00

    Clavos BOSTITCH, Bright, 1-1/4-Inch, 16GA, 1000 unidades

    -Titulo Original : BOSTITCH Finish Nails, Bright, 1-1/4-Inch, 16GA, 1000-Pack (SB16-1.25-1M) -Fabricante : BOSTITCH -Descripcion Original: Wicked Colors son colores transparentes con una alta carga de pigmento para una excelente cobertura fuera de la botella, pero se pueden reducir en exceso para hacer que los colores finos sean perfectos para aerógrafos detallados y de baja psi. Wicked Fluorescent Set contiene 2 oz. cada uno: Púrpura Fluorescente, Verde Fluorescente, Rosa Fluorescente, Frambuesa Fluorescente, Amarillo Fluorescente y Naranja Fluorescente. ¡Los colores fluorescentes malvados NO son resistentes a la luz! Efecto neón debido al pigmento en descomposición: resistencia limitada a la decoloración. Para obtener los mejores resultados, aplíquelo sobre el color base del color. Para obtener mejores resultados al mezclar con Createx Colors 4030 Intercoat y diluir con 4012 High Performance Reducer (no incluido). Createx Colors 4030 Intercoat y 4012 High Performance Reducer se venden por separado. Basado en agua. Cumple con ASTM D-4236. Fabricado por Createx Colors. Fabricado en EE. UU...
  • Clavadora Neumatica : Metabo HPT NT65MA4 Pneumatic Angled...
    Precio:  $43,839.00

    Clavadora Neumatica : Metabo HPT NT65MA4 Pneumatic Angled...

    -Titulo Original : Metabo HPT NT65MA4 Pneumatic Angled Finish Nailer, 15 Gauge, 1-1/4-Inch up to 2-1/2-Inch Finish Nails, Integrated Air Duster, Selective Actuation Switch, 360-Degree Exhaust Portal, 5-Year Warranty-Fabricante : Metabo HPT-Descripcion Original: Same tools. New name. Hitachi power tools has renamed to Metabo HPT // Integrated air duster can be used to clear away dust and debris from the work surface in preparation for nailing or gluing // Tool-less, easy to clear nose for quick nail extraction should a nail jam during use // Selective actuation switch allows for either sequential or contact nailing with a simple flip of the switch- no tools or parts required // Tool-less depth of drive dial adjusts for flush fastening into varying materials for improved control and a professional finish // 360-degree fully adjustable exhaust portal directs air exhaust away from the user or work piece // At only 4.2 lbs, this finish nailer minimizes user fatigue, while increasing maneuverability // No-mar tip protects the work surface from damage and can be removed if not needed // Style: The NT65MA4 15-gauge angled finish nailer is the ideal nailer For installing crown and base moldings, window and door casings, chair rails, cabinets, exterior trim and staircases. Its compact body and angled magazine make for easier placement and operation in tight angles. The integrated air Duster clears debris from the work site allowing for faster and cleaner job completion. The NT65MA4 accepts 15-gauge nails from 1-1/4 Up to 2-1/2 In length...
  • Clavadora Neumatica : B&C Eagle CN45R 15 Degree 3/4-Inch to.
    Precio:  $96,769.00

    Clavadora Neumatica : B&C Eagle CN45R 15 Degree 3/4-Inch to.

    -Titulo Original : B&C Eagle CN45R 15 Degree 3/4-Inch to 1-3/4-Inch Coil Roofing Nailer-Fabricante : B & C Eagle-Descripcion Original: Tool free adjustable depth of drive // Adjustable exhaust deflector (tool free 360 Degree) // Weight: 4.8lbs // Adjustable shingle guide // Lightweight magnesium housing // From the Manufacturer The B&C Eagle CN45R coil roofing nailer has a light and rugged magnesium housing with a soft rubber grip designed to meet the needs of any job in any climate. The magazine has a capacity to hold up to 120 nails in lengths ranging from 3/4-inch to 1-3/4-inches. The built-in trigger selection allows you to choose quickly and easily between single fire and bump fire nailing. A 360 degree directional cap gives you the freedom to direct the flow of the exhaust away from your face while working. The CN45R coil roofing nailer is also equipped with a built in air filter to trap dirt from the inside of the tool keeping it clean during use and then expelling some of the debris once it is unplugged from the air source. Other convenient features include a tool free depth of drive, casting wear protection with anti-skid housing pads and an adjustable shingle guide. The CN45R has a patented spring loaded nail guide which assures the user of safely nailing every nail straight down to the last nail in the coil. Works with 15 degree coil roofing nails 3/4-Inch to 1-3/4-Inches in length. Look for B&C Eagle CR series (Purple label) coil roofing nails...
  • Clavadora Neumatica : Metabo Hpt Nr83a5(s) Pneumatic Framin
    Precio:  $109,619.00

    Clavadora Neumatica : Metabo Hpt Nr83a5(s) Pneumatic Framin

    -Titulo Original : Metabo HPT NR83A5(S) Pneumatic Framing Nailer, 2-Inch up to 3-1/4-Inch Plastic Collated Full Head Nails, 21 Degree Magazine, Selective Actuation Switch, Rafter Hook 5-Year Warranty-Fabricante : Metabo HPT-Descripcion Original: Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT // Cylinder valve drive system for rapid response and increased durability // Selective actuation on trigger allows for either sequential or contact nailing // Rafter hook is included for convenience on the jobsite // Equipped with an industrial 2-piece magazine that can withstand jobsite abuse // Accepts two strips of nails at a time and locking feeder system makes replenishments quick and easy // Open nose design for easy extraction of a jammed nail // Ergonomic non-slip rubber grip on handle helps maintain a secure hold and comfort during use // The NR83A5(S) Full Round Head framing nailer without depth adjustment is used for floor and wall framing, truss build-up, window build-up, construction of subflooring and roof decking, wall sheathing and Mobile home and modular home construction. The NR83A5(S) is like the original NR83A that you have Come To trust, but now with an improved trigger design and sharing all the same internal parts as the original NR83A. The NR83A5(S) relies on the same cylinder valve drive system as the NR83A, which offers both rapid response and great driving power...
  • Clavadora Neumatica : 402A, 16-Gauge Manual Hardwood...
    Precio:  $92,339.00

    Clavadora Neumatica : 402A, 16-Gauge Manual Hardwood...

    -Titulo Original : 402A, 16-Gauge Manual Hardwood Flooring Nailer-Fabricante : Porta-Nails-Descripcion Original: Uses 2 in., and 1-1/2 in. T Headed 16 Ga nails // Binds 5/8 in., 3/4 in. and 33/32 in. domestic solid wood flooring // Accessory shoes, sold separately, allow you to face nail and nail 3/8 in. - 9/16 in. solid wood, 5/8 in. bamboo and 18mm flooring // Comes with an extension handle, mallet, angled shoe for 5/8 in. to 3/32 in. tongue and groove flooring, wrenches and a rugged carrying case // Multi-hit minimizes fatigue while providing greater impact // Size: Product Description Nothing attacks a hardwood flooring job like the Porta-Nails 402A, 16-Gauge Manual Hardwood Flooring Nailer. The first of its kind offering Porta-Nails original ratchet assembly, the nailer ensures that the ram does not return until the nail is properly seated. One or two strikes of the head is all it takes for preferred seating every time. Bind nails 5/8 in., 3/4 in. and 33/32 in. domestic solid wood flooring. Accessory shoes, sold separately, allow you to face nail and nail 3/8 in. - 9/16 in. solid wood, 5/8 in. bamboo and 18mm flooring. The patented anti-split nail cuts through wood without splitting your floor and three lengths of nails will insure you have the right fastener for the job. Nailer uses 2 in., and 1-1/2 in. T Headed 16 Gauge cleats. Flooring Nails and are also available in stainless steel for exterior use, when using over ACQ plywood or installing ACQ decking over ACQ joist. The nailer comes with an extension handle, mallet, angled shoe for 5/8 in. to 3/32 in. tongue and groove flooring, wrenches and a rugged carrying case. From the Manufacturer Designed for angle nailing 5/8- to 1-Inch tongue and groove hardwood flooring. Speed up the nailing process and insure the tightest floor possible with the Porta-Nailer hardwood flooring nailer. Besides tongue and groove flooring nail decorative paneling, sub-flooring, sheathing and roof decking. The unique ratcheting ram insures that the ram does not return until the nail is properly seated. Hit the ram until it returns and guarantee a properly set nail every time and the tightest floor possible. This configuration will nail 5/8, 3/4- and 33/32-Inch tongue and groove flooring. You can purchase shoe accessories separately for nailing thinner flooring (3/8 to 9/16-Inch) and face nailing. Its lightweight and durable construction combines the high strength of aluminum with precision machined heat treated steel parts making it light, long wearing and easy to handle. The Porta-Nailer is manufactured in the USA and comes with an extension handle, mallet and rugged carry case...
  • Clavadora Neumatica : Metabo Hpt Nr90aes1 Pneumatic Framing
    Precio:  $60,169.00

    Clavadora Neumatica : Metabo Hpt Nr90aes1 Pneumatic Framing

    -Titulo Original : Metabo HPT NR90AES1 Pneumatic Framing Nailer, 2 up to 3-1/2 Plastic Collated Full Head Nails .113 - .148, Tool-less Depth Adjustment, 21 Degree Magazine, Selective Actuation Switch, 5-Year Warranty-Fabricante : Metabo HPT-Descripcion Original: Same tools. New name. Hitachi power tools has renamed to Metabo HPT // New head guard design allows for quicker disassembly during tool maintenance // Lightweight at 7.5 lbs and well-balanced for ease of maneuverability and less user fatigue // Selective actuation switch allows for quick transitions between sequential and contact nailing with the simple flip of a switch // Accepts 2" up to 3-1/2" plastic collated framing nails // Tool-less depth adjustment dial allows the user to countersink or flush drive nails into a variety of materials without having to adjust the pressure at the compressor // Two-piece anodized aluminum magazine makes repairs or replacements easy and with minimal expense // Two-step nail loading makes fastener replenishments quick and easy, reducing downtime // Style: The NR90AES1 framing nailer drives plastic collated nails from 2 Up to 3-1/2 In length and features Metabo HPT next generation industrial design. the redesigned head guard allows for faster and easier disassembly process, saving valuable time during tool maintenance. Weighing only 7.5 lbs, it is easy to use all day, while still providing the power of a bulkier, heavier nailer. It can be used for floor and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction...
  • Clavadora Neumatica : Freeman PFL618BR 3-in-1 Pneumatic...
    Precio:  $62,299.00
    Expira: 05/04/2021

    Clavadora Neumatica : Freeman PFL618BR 3-in-1 Pneumatic...

    -Titulo Original : Freeman PFL618BR 3-in-1 Pneumatic Flooring Nailer Ergonomic & Lightweight Nail Gun for Flooring with Padded Grip Long Reach Handle & Interchangeable No-Mar Baseplates-Fabricante : Freeman Pneumatics-Descripcion Original: NAILED IT: This versatile 3-in-1 flooring nailer drives 3 types of fasteners without having to change the magazine: T-cleats, L-cleats & staples. It features no-mar interchangeable base plates for stability & protection against scratches to floor surfaces // PRO DESIGN: This nailer features a durable & lightweight aluminum body, long reach handle with padded grip. & heat-treated one-piece hardened steel driver blade. It comes with a carrying case, oil, wrenches, goggles, and a no-mar white rubber mallet. // THE RIGHT TOOL FOR THE JOB: We're committed to providing outstanding value, top tier customer service and long-lasting, high-quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between. // QUALITY & DURABILITY: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warranted in the USA // TOUGH & DEPENDABLE: We make an array of durable construction tools and accessories, including staplers & nailers for siding, flooring, framing, finish, & roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode & Dewalt. // Style: Product description Freeman PFL618BR Features: -3-in-1 Flooring gun with hard case. -Anodized aluminum magazine. -Air filter / anti dust cap. -One piece driver blade. -Interchangeable face plates. -White rubber mallet. -Durable plastic case. -Oil, goggles and wrenches included. -3-in-1 design fastening system. -7 Year limited warranty. -Dimensions: 22.75 H x 16.75 W x 3.5 D. Specifications: -Fastener gauge: 15.5 (staples) 16 (cleats). -Fastener range: 1.5 - 2 and 0.25 crown staples from 1.5 - 2. -Operating pressure: 70 - 115 psi. -Magazine capacity: 100 - 120 pcs. From the Manufacturer Freeman PFL618BR 3-in-1 flooring stapler, T-Cleat, and L-Cleat nailer combination is the work horse in the Freeman line-up. Our gun shoots both cleated nails and staples. It shoots 15.5- and 16-gauge staples ranging from 1 to 2 inches, and L/T cleats ranging from 1-1/2 inches to 2 inches. The 3-in-1 magazine has a capacity of 100-120 staples/cleats. The body of this gun is constructed of durable die-cast aluminum for job site dependability for daily use. It comes with two composite non-marring base plates for added stability and protection against scratches to the flooring surface. The interchangeable base plates allow you to install 1/2- to 3/4-inch nail-down flooring. It provides a convenient long reach handle with a padded grip. Internally, the driver blade is constructed of a very tough heat-treated one-piece hardened steel, aluminum cylinder, high quality rubber o-rings, and internal air filter. This tool comes with carrying case, oil, wrenches, goggles, and a no-mar white rubber mallet. This tool is manufactured under the strict guidelines for quality control. Each gun is tested before it is approved for shipping. Freeman Pneumatic line of nailers was developed with the professional in mind. Our company has worked diligently to develop a product that could meet the demands of the Professional customer and still hold true to the value associated with our product and its price point. Freeman guns are sold, distributed, serviced, and warranted by a US company, Prime Global Products, Inc. PGP is proud to offer our nailers to professionals and do-it-yourselfers alike. Freeman nail guns are backed by our 7-year limited warranty. If your Freeman tool ever needs service please read our warranty policy for complete details...
  • Clavadora Neumatica Metabo HPT Clavos Espiga 16 a 25mm
    Precio:  $34,929.00

    Clavadora Neumatica Metabo HPT Clavos Espiga 16 a 25mm

    -Titulo Original : Metabo HPT Pin Nailer Kit, 23 Gauge, Pin Nails - 5/8 to 1-3/8, No Mar Tip - 2-Fabricante : Metabo-Descripcion Original: Clavadora calibre 23 con ajuste de profundidad Incluye: clavadora de clavijas NP35A, estuche portátil, punta no estropeada (x2), gafas de seguridad, enchufe macho NPT de 1/4 , llave de barra hexagonal Las mismas herramientas Nuevo nombre. Hitachi Power Tools ha cambiado de nombre a Metabo HPT La revista se ajusta automáticamente a 5/8 , 3/4, 1 , 1-3 / 16 y 1-3 / 8 longitudes de sujetador para su uso en una amplia variedad de proyectos Ajuste de profundidad para unidades de descarga en una variedad de superficies Indicador de recarga para un fácil reconocimiento visual de pequeñas cantidades de uñas para evitar la cocción en seco. Gran capacidad de fijación para menos recargas y menos tiempo de inactivida...
  • Clavadora Neumatica : NuMax SFR2890 Pneumatic 28° 3-1/2...
    Precio:  $38,529.00

    Clavadora Neumatica : NuMax SFR2890 Pneumatic 28° 3-1/2...

    -Titulo Original : NuMax SFR2890 Pneumatic 28° 3-1/2 Framing Nailer-Fabricante : PGP-Descripcion Original: Great Pneumatic nail gun for framing, Sheathing, subfloors, deck work, fencing, and more // Compatible with 10-12 gauge wire or paper collated 28 Degree clipped head framing nails from 2 inches to 3-1/2 inches // One piece Drive blade for increased durability // Easy to load magazine features a simple pull-back pusher // Anti-dry-firing design reduces damage on internal components // The NuMax SFR2890 pneumatic 28 degree 3-1/2 Framing nailer is great for DIYers working on home improvement projects as well as professional construction contractors at the job site. Use This Pneumatic tool for applications such as framing, truss assembly, sheathing, subfloors, deck work, fencing, pallets, crates, and assembling furniture. This air powered nail gun is compatible with 10-12 gauge wire or paper collated 28 degree Clipped head framing nails from 2 To 3-1/2. The rugged framing nailer features a one piece Drive blade for Increased durability and a lightweight magnesium body perfect for extended use. A simple pull-back Pusher makes the magazine easy to reload when the anti-dry-firing threshold is met, designed to reduce damage on internal components and extend the life of the tool. The dual mode trigger allows for bump or sequential firing, and the no mar safety contact tip eliminates damage to working surfaces. This nail gun also features a comfort grip handle for increased control during longer jobs, and a convenient 360 degree adjustable exhaust to direct air away from your face. The affordable pneumatic 28 degree 3-1/2 Framing nailer will allow you to finish jobs quickly, and is covered by NuMax 1 year limited warranty and 30 day wearable parts warranty...
  • Clavadora Neumatica : B&C Eagle FN1564 15 Gauge 1-Inch to...
    Precio:  $54,639.00

    Clavadora Neumatica : B&C Eagle FN1564 15 Gauge 1-Inch to...

    -Titulo Original : B&C Eagle FN1564 15 Gauge 1-Inch to 2-1/2-Inch Angled Finish Nailer with Case-Fabricante : B & C Eagle-Descripcion Original: No-Mar tip // Tool free adjustable depth of drive // Weight: 4lbs // Adjustable exhaust deflector (tool free 360 Degree) // Rugged Carry Case // From the Manufacturer The B&C Eagle FN1564 15 gauge angled finish nailer is designed to meet the needs of any finish or trim project. Nail compatibility for the FN1564 ranges from 1-Inch to 2-1/2-Inches. This tool features a lightweight housing with a soft rubber grip to maintain comfort and stability. The front of the tool includes a quick opening latch allowing you to clear jammed nails quickly and safely. A 360 degree directional cap gives you the freedom to direct the flow of the exhaust away from your face while working. The FN1564 also has a convenient tool free adjustable depth of drive. The built-in trigger selection allows you to choose quickly and easily between single fire and bump fire nailing. Accessories include a plastic carrying case, no-mar tip and belt hook. The FN1564 works with DA style 15 gauge angled finish nails, 33-35 degree, 1-Inch to 2-1/2-Inches in length. Look for B&C Eagle DA series (Black label) finish nails...
  • Clavadora Neumatica : BOSTITCH BTFP12569 2-in-1 Flooring...
    Precio:  $87,779.00

    Clavadora Neumatica : BOSTITCH BTFP12569 2-in-1 Flooring...

    -Titulo Original : BOSTITCH BTFP12569 2-in-1 Flooring Tool-Fabricante : Bostitch-Descripcion Original: DRIVES: 15.5 GA flooring staples or 16 GA "L" shaped flooring cleats from 1-1/2" to 2" length. // Has pneumatic driving action. Used in hardwood and engineered flooring // NON-MARRING BASE PLATES: For 1/2" (12.7 mm) through 3/4" (19.1 mm) flooring. // ERGONOMIC DESIGN: Has long handle with a comfortable rubber grip. // INCLUDES: Nailer, Interchangeable Base Plates, Mallet, Wrenches and 1/4" (6.4 mm) Air Fitting with Dust Cover. // The BOSTITCH BTFP12569 2-in-1 Flooring Tool drives 15.5ga staples and 16ga cleat nails from 1-1/2 to 2 length. It features mallet actuated pneumatic driving action, along with non-marring, interchangeable base plates. This tool is ergonomically designed with longer handle and comfortable rubber grip and is lightweight at 10.85 lbs. Low air requirements at 3.7 SCFM. Designed for hardwood and engineered flooring installation, which helps eliminate gaps between flooring boards. For 1/2 (12.7 mm) through 3/4 (19.1 mm) flooring, ready to use out of box. Includes Tool, Mallet, Oil, Wrenches, 1/4 (6.4 mm) air fitting...
  • Clavadora Neumatica : Freeman PBR32Q 1-1/4-Inch Brad Nailer.
    Precio:  $24,289.00

    Clavadora Neumatica : Freeman PBR32Q 1-1/4-Inch Brad Nailer.

    -Titulo Original : Freeman PBR32Q 1-1/4-Inch Brad Nailer with Quick Jam Release and Depth Adjust-Fabricante : Freeman Pneumatics-Descripcion Original: Ideal for decorative trim, shoe molding, base board, crown molding, base molding, door and window casing, door installation, chair rail, hand railing and other projects // Quick Release for easy access clearing jams // Uses 18-Gauge straight brad nails ranging from 3/8-in to 1-1/4-in // Dual spring in-line magazine provides a consistent feed of fasteners to the drive blade // Reversible belt hook allows the tool to stay close by, but not in the way // Style: Product description 1' Brad Nailer with Quick Jam Release and Depth Adjust The Freeman PBR32Q 1-1/4 18 Gauge Brad Nailer is a professional quality, innovated home improvement tool. The Freeman Brad Nailer features an oil-free operation that requires no regular maintenance and eliminates the risk of stains on project surfaces. This brad nailer has a lightweight aluminum design and a tool-free adjustable exhaust that conveniently directs exhaust from your face, quick release nose for easy jamb clearing and tool-free depth adjust. This tool also comes equipped with Teflon o-rings, one piece drive blade, air filter, dust cap and dual spring magazine which makes the Freeman nailer the oblivious choice. The Freeman 18 gauge 1-1/4' Brad Nailer is great for interior and exterior finish and trim, furniture, cabinetry, crafts and hobbies. This nailer is manufactured under the strict guidelines to ensure professional quality. Features: 360 adjustable exhaust Anodized aluminum rail and cylinder Air filter/anti-dust cap One piece driver blade Reversible belt hook Co From the Manufacturer The Freeman PBR32Q is equipped with a 360-Degree adjustable exhaust, anodized aluminum cylinder, Teflon oil-less O-rings, one piece heat treated steel driver blade, finger-depth adjustment, no-mar tip, quick jamb release, anodized aluminum rail and an air filter/dust cap. The product also includes a reversible belt hook, oil, goggles and wrenches. The Freeman straight 1-1/4-Inch brad nailer has a lightweight aluminum design and a tool-free adjustable exhaust that conveniently directs exhaust away from your face. The 18-gram 1-1/4-Inch brad nailer is great for interior and exterior finish and trim, furniture, cabinet work, crafts and hobbies. This tool is manufactured under strict guidelines for quality control. Each gun is tested before it is approved for shipping. Freeman Pneumatic line of nailers was developed with the professional in mind. Our company has worked diligently to develop a product that could meet the demands of the professional customer and still hold true to the value associated with our product and its price point...
Mostrar del 1 al 24 (de 76 productos)
Páginas de Resultados:  1  2  3  4  [Siguiente >>]