Arriba

Accesorios para Herramientas > Discos > Discos de Corte

Mostrar: 
Mostrar del 1 al 24 (de 737 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Disco de Talla de Madera Para Amoladora Angular - Grueso
    Precio:  $41,809.00

    Disco de Talla de Madera Para Amoladora Angular - Grueso

    -Titulo Original : Kutzall Original Shaping Dish - Coarse, 4-1⁄2 (114.3mm) Dia. X 7⁄8 (22.2mm) Bore - Woodworking Angle Grinder Attachment For DeWalt, Bosch, Milwaukee, Makita. Abrasive Tungsten Carbide, DW412O390-Fabricante : Kutzall-Descripcion Original: - Dar forma, contornear, aliviar, hacer muescas, aplanar, recortar, ahuecar, ajustar - Dientes de carburo de tungsteno: para una durabilidad increíble - Desempeño híbrido - Eliminación rápida de material y calidad superficial. - Operación cómoda y sin esfuerzo - Solo debe usarse en materiales no metálicos. El accesorio de amoladora angular imprescindible y más versátil. Ya sea que sea un aficionado ocasional o un artesano profesional, los recubrimientos de carburo duraderos de Kutzall durarán trabajo tras trabajo. Kutzall Dish Wheels es la herramienta perfecta para dar forma cóncava, lo que le brinda un control sin esfuerzo y le ahorra tiempo. Su forma redondeada y su rápida acción de corte los hacen excelentes para contornear sillas esculpidas, tazones grandes e incluso madera dimensional. Para esmerilar y moldear a mano alzada, puede esperar Hacerlo todo, con Kutzall. Estas herramientas son de corte rápido y de larga duración, y están diseñadas para funcionar con facilidad y eficiencia donde fallan otras herramientas convencionales. Sus revestimientos de carburo de tungsteno consisten en cientos de dientes extremadamente afilados que eliminan rápidamente el inventario y duran más que cientos de almohadillas de papel de lija. No son propensos a cargarse, pero pueden limpiarse fácilmente con solvente o quemarse con un soplete de gas. Las herramientas Kutzall Original son las herramientas más populares y versátiles de la línea Kutzall. Presentan dientes puntiagudos, uniformes y afilados de metales excepcionalmente duros, soldados en la forma de la herramienta de acero. Estas herramientas eliminan el material muy rápidamente, pero dejan una superficie relativamente fina en el trabajo. Las herramientas Kutzall Original también brindan una acción de corte muy suave para facilitar el control. Las RPM máximas recomendadas son 15,000. Compatible con la mayoría de las amoladoras angulares, incluidas: Makita, Bosch, Dewalt, Black and Decker, Milwaukee, Hitachi y más. Instrucciones de montaje: los discos y las ruedas para platos tienen un D.I. de 7/8 y están diseñados para montarse en una amoladora angular eléctrica estándar con un eje de 5/8. Se montan en el resalte de 7/8 que se encuentra en el casquillo o adaptador con reborde incluido con la mayoría de las amoladoras angulares...
  • Disco Sierra LENOX Corte de acero 10i 52T (21886ST100052CT
    Precio:  $60,189.00

    Disco Sierra LENOX Corte de acero 10i 52T (21886ST100052CT

    -Titulo Original : Lenox Tools 10-inch Circular Saw Blade, Steel-cutting, 52-tooth (21886st100052ct)-Fabricante : Lenox Tools-Descripcion Original: The product is 10x52 STL Circle Blade // Easy to use // The product is manufactured in China // Titanium Carbide Tipped resists material build up // Less burring than Abrasive cutting // Reduced Material Burning // Triple Chip Grind for added durability // Resharpenable // Size:  |  Style: Product Description The product is 10x52 STL Circle Blade. Easy to use. The product is manufactured in China. From the Manufacturer The Lenox Tools 21886ST100052CT Metal Cutting Circular Saw Blade 10-Inch by 52 Teeth Steel is a faster way to cut metal. The Blade is titanium carbide tipped which resists material build up. The Blade also provides less burring than abrasive blades, which eliminates the need for secondary grinding and reduces material burning...
  • Disco de Diamante MK DIAMOND 156726 lapidario de corte húmedo MK303 12 pulg.
    Precio:  $144,589.00

    Disco de Diamante MK DIAMOND 156726 lapidario de corte húmedo MK303 12 pulg.

    -Titulo Original : MK Diamond 156726 MK303 Wet Cutting Lapidary Diamond Blade, 12-Inch-Fabricante : MK DIAMOND-Descripcion Original: 12 by .065 by 1 inch - Continuous Rim // Lapidary blade // Professional grade diamond blade // Designed for cutting rare and valuable materials // Produces smoother cuts, lasts longer and cuts faster than notched rim or plated diamond blades // Wet cutting lapidary blade specifically designed for cutting rare and valuable materials // Very thin width of continuous rim blade designed to hold waste to a minimum // Size: Product Description MK Diamond 156726 MK-303 12 by .065 by 1 inch - Continuous Rim is a lapidary blade. It is professional grade. The MK-303 Professional grade diamond blade has been designed for cutting rare and valuable materials when waste needs to be held to a minimum and speed of cut is essential. The MK-303 produces smoother cuts, lasts longer and cuts faster than notched rim or plated diamond blades. Designed for use with a water soluble coolant. Blades 16 inch and larger have segmented rims. From the Manufacturer MK Diamond MK303 12 inch diameter by .065 inch width by 1 inch arbor wet cutting lapidary diamond blade is specifically designed for cutting rare and valuable materials. The very thin width of the continuous rim blade is designed to hold waste to a minimum and the speed of cut is essential for protecting the valuable material from damage. The professional series diamond blades last longer and cut faster than ordinary notched rim or plated diamond blades. MK Diamond has a worldwide reputation for superior cutting speed, maximum performance and exceptional blade life...
  • Disco Sierra NORSKE NCSBP214 8 x 48T Corte de metal para t
    Precio:  $21,599.00

    Disco Sierra NORSKE NCSBP214 8 x 48T Corte de metal para t

    -Titulo Original : Norske Tools Ncsbp214 8 Inch 48t Metal Cutting Saw Blade For Steel Roofing, Metal Siding, Steel Pipe, Steel Studs & More 5/8 Inch Bore-Fabricante : Norske Tools-Descripcion Original: 8 inch x 48 teeth // High performance cutting of steel roofing, metal siding, steel pipe, steel studs and more // 0° hook angle reduces overfeeding, jamming, tooth breakage and kickback // Modified triple chip grind (MTCG) allows for easier cutting // C6 Micro-grain Carbide tips // Size: 8 X 48T metal cutting Saw blad...
  • Disco Sierra FEIN 227 Starlock Mount Curved HCS E Cut Stan
    Precio:  $18,059.00

    Disco Sierra FEIN 227 Starlock Mount Curved HCS E Cut Stan

    -Titulo Original : Fein 227 Starlock Mount Curved Hcs E-cut Standard Saw Blade, 55 Mm Length X 35 Mm Width, Metal-Fabricante : Fein-Descripcion Original: For precise cuts in coated smooth woods // Curved blade offers improved plunge cut performance // Features the star lock mounting system // Package of 1 // One year warranty against defects in material or manufacture // Fein e-cut curved HCS blade is designed for cleaner more precise plunge cuts in finished woods. The curved shape allows cuts to be made in smooth coated surfaces easier and with more precision, while the wide hooked cutting edge helps remove waste and make long straight cuts. The Fein e-cut curved HCS blades offer maximum cutting performance in all woods, drywall and plastic materials. Featuring the star lock mounting system, the Fein e-cut curved HCS blades will fit most oscillating multi-tools available. Use the Fein e-cut curved HCS blades anywhere you need precise plunge cuts in wood. Blade width 1-1/2. one year warranty against defects in material or manufacture...
  • Disco sierra 254mm 80 dientes para aluminio eje 30mm
    Precio:  $30,609.00

    Disco sierra 254mm 80 dientes para aluminio eje 30mm

    -Titulo Original : SOUFLO 10-Inch And 80 Teeth Circular Saw Blade For Aluminium With 30mm Arbor (10-80T)-Fabricante : SOUFLO-Descripcion Original: 2011 Japanese pressing with 6 bonus tracks. Warner...
  • Disco Sierra FREUD 10 x 80T Thin Kerf Ultimate contrachapa
    Precio:  $48,339.00

    Disco Sierra FREUD 10 x 80T Thin Kerf Ultimate contrachapa

    -Titulo Original : Freud 10 X 80t Thin Kerf Ultimate Plywood & Melamine Blade (lu79r010)-Fabricante : Freud-Descripcion Original: 10" Blade Diameter, 80 Teeth, Hi-ATB Grind, 5/8" Arbor, .098" Kerf, 2° Hook Angle // Premium TiCo HI-Density Carbide Crosscutting Blend for Maximum Performance // High Alternate Top Bevel (Heat)Tooth Design produces splinter-free cuts // Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp, splinter-free flawless finish // Parma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up. // Style: Product Description Using advanced technology, Freud developed the LU79 thin kerf line of saw blades provides flawless, chip-free edges in veneered plywood's, fine moldings, melamine, laminates, and crosscuts in solid woods. Using advanced technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. This blade provides flawless, chip-free edges in veneered plywood's, fine moldings, melamine, laminates, and crosscuts in solid woods. The combination of Hi-ATB tooth design and anti-vibration slots makes these thin kerf blades the ultimate finish blades. The result is a cut so smooth it eliminates the need for a stabilizer or a scoring blade! Amazon.com The 10-inch Freud LU79R010 Thin Kerf Ultimate Plywood and Melamine Saw Blade is a heavy-duty blade that delivers a precise, chip-free finish when cutting through everything from veneered plywood to melamine countertops and hardwood molding. Featuring 80 teeth with TiCo high-density carbide tips and Freud's Perma-SHIELD coating, which helps reduce heat buildup and friction, this durable thin-kerf blade is built to stay true, delivering accurate cuts over the long haul. Ideal for melamine, laminates, plywood, and crosscutting hardwood; handles materials 1/4 to 1-5/8 inches thickHeavy-duty plate with laser-cut, anti-vibration slotsTough Perma-SHIELD coating reduces friction and heat buildupCoatingPerma-SHIELDDiameter10Teeth80 Hi-ATBArbor5/8Kerf (K).098Plate (P).071 allows for faster feed rate and reduced waste specifically designed to cut nonferrous metals extends tooth life This thin-kerf blade's 80-tooth, high-alternating-top-bevel ( Hi-ATB) configuration features a large number of small teeth that face both left and right--a setup that ensures clean crosscuts and splinter-free finishes, even when working with hard-to-handle materials like laminates. This setup paired with Freud's anti-vibration technology results in cuts so smooth that they eliminate the need for a stabilizer or a scoring blade.This blade is designed for optimal performance when cutting materials that are 1/4 to 1-5/8 inches thick, including hard- and softwood, chipboard, plywood, laminates, and melamine. The blade can also handle ripping wood, and it can tackle thinner or thicker materials. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 5/8-inch arbor and produces a 0.098 kerf. This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work--a feature that's especially important when working with plywood or laminates. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use. This thin-kerf saw blade's 80 teeth are finished with tips made from Freud's application-specific TiCo high-density carbide crosscut blend. Formulated to help the blade maintain a sharp cutting edge in the face of demanding crosscut applications, this blend is extra hard--due to including more high-density tungsten carbide than other TiCo blends--and it still offers the full mix of improved corrosion resistance, heat resistance, and impact resistance that you expect from TiCo.With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer--saving you time and money. Built to withstand tough use in less-than-ideal conditions, this blade is finished with Freud's red Perma-SHIELD--a non-stick coating that reduces friction and nearly eliminates the heat buildup that excess friction can cause. By providing complete thermal insulation, this coating protects your tools and your work surface. And it resists binding when the blade is used for large-volume cutting applications, which reduces blade warp.As a lubricating feature, Perma-SHIELD allows the blade to spin freely while reducing stress on the motor and carriage of your saw. In addition, this coating helps prevent debris collection and resin or pitch buildup. Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup is another little convenience that translates into longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.This industrial saw blade is backed by Freud's limited lifetime warranty. An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more. Freud LU79R010 Ultimate Thin Kerf Plywood and Melamine Saw Blade--10-inch diameter, 5/8-inch arbor, 80-tooth design. See all Product descriptio...
  • Disco de Diamante MK DIAMOND 133967 MK-215 Supreme mármol y baldosas continuas húmedas de 14 pulg. con buje extraíble de
    Precio:  $114,919.00

    Disco de Diamante MK DIAMOND 133967 MK-215 Supreme mármol y baldosas continuas húmedas de 14 pulg. con buje extraíble de

    -Titulo Original : MK Diamond 133967 MK-215 Supreme 14-Inch Wet Continuous Tile and Marble Blade with 20 Millimeter knock-out Bushing for 1-Inch Arbor-Fabricante : MK DIAMOND-Descripcion Original: 14 by .080 by 1 inch // Continuous rim wet cutting blade // Fast cutting tile blades for smooth, chip-free cutting on tile and other stone materials // Excellent on dense floor materials // Diamond blade // Cuts tile, marble, vitreous tile, slate limestone, granite, bluestone and hard quartz // Supreme blade for chip free cutting // 7 millimeter continuous rim for long blade cutting life // Product Description MK Diamond 133967 MK-215 14 by .080 by 1 inch is a continuous rim wet cutting blade. Fast cutting tile blades for smooth, chip-free cutting on tile and other stone materials. Excellent on dense floor materials. From the Manufacturer MK Diamond 133967 MK-215 Supreme 14-Inch diameter by .080-Inch width has bronze bushing, which can be knocked out and make the arbor 1-Inch. The MK-215 is a wet cutting tile and marble diamond blade. It is supreme grade and also performs very well cutting materials such as vitreous tile, slate, limestone, granite, marble, bluestone, and hard quartz. Blade has 7 millimeter continuous rim height for chip-free cutting and performance. Excellent on dense floor materials...
  • Disco Sierra MAKITA T 01404 24T Carburo Framing con borde
    Precio:  $12,139.00

    Disco Sierra MAKITA T 01404 24T Carburo Framing con borde

    -Titulo Original : Makita T-01404 24t Framing Carbide-tipped Saw Blade, 6-1/2-Fabricante : Makita-Descripcion Original: Ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss // Carbide tooth construction for clean cuts and long life // Fully hardened and expertly hand-tensioned steel saw plates for true cuts // Specially designed for cordless saws to permit more cuts per charge // For use with 6-1/2" Cordless Circular Saws with 5/8" arbor // Style: The Makita T-01404 6-1/2 24T Carbide-Tipped Saw Blade has an Ultra-thin Kerf Design for use with Cordless Circular Saws...
  • Disco Sierra FREUD Combinación 8 x 40T Thin Kerf (LU83R008
    Precio:  $36,939.00

    Disco Sierra FREUD Combinación 8 x 40T Thin Kerf (LU83R008

    -Titulo Original : Freud 8 x 40T Thin Kerf Combination Blade (LU83R008)-Fabricante : FREUD-Descripcion Original: High quality and professional grade for ripping and crosscu tting of thick hardwood to 3-1/2" thick and softwood to 1" thick. // The blades can be used on Circular Saws, Table Saws, Miter Saws, Hand Saws and Chop Saws. // Ideal for cutting hardwood, softwood, exotic wood and abrasive wood. // Thin kerf allwos a smooth finish with minimum waste. Lower hood angle improves the surface quality of the cut and increases the feed pressure. // 1.6 mm thin kerf design. 5/8" Arbor. //...
  • Disco de pulido 8-inch 120 Grit
    Precio:  $13,109.00

    Disco de pulido 8-inch 120 Grit

    -Titulo Original : Rannb Flat Lap Wheel 120 Grit 8-inch Outer Dia Diamond Coated Sanding Polishing Disc-Fabricante : Rannb-Descripcion Original: - - Especificación - diámetro exterior de 8 pulgadas; Grano 120 - - Tamaño del orificio interno - Las ruedas de solape plano tienen un orificio de eje de 1/2 pulgada para amoladora angular. - - Aplicación: se utiliza para moler y pulir joyas, vidrio, roca, piedra, granito, etc. - - Superficie plana: son absolutamente planos y paralelos para cumplir con los requisitos de facetado más exigentes. - - Puntas - Recomendado para pulido fino y áspero en material de facetado más pulido lapidario general cuando se requiere precisión. Especificación Espesor de grano 120: 1 mm / 0.039 Diámetro exterior: 8 pulgadas / 200 mm Contenido del paquete 1 pieza x Rueda de regazo plana Características del producto - Área de superficie de recubrimiento de diamante grande: Casi 95%; Solo un lado del Disco de diamante está recubierto con partículas de diamante. - Empaquetado individualmente en papel marrón para una buena protección y fácil de transportar - El diseño extremadamente plano y paralelo hace que el disco encaje perfectamente en la máquina sin espacios y cumpla con los requisitos de tallado más exactos...
  • Disco Sierra FREUD LU84M014 14 Combinación
    Precio:  $90,269.00

    Disco Sierra FREUD LU84M014 14 Combinación

    -Titulo Original : Freud Lu84m014 14 Combination Blade-Fabricante : Freud-Descripcion Original: Premium TiCo Hi-Density Carbide combination blend for maximum performance // Large gullets in front of flat top rakers allow for fast ripping and easy chip removal // Laser-Cut Anti-Vibration slots Drastically reduce vibration and sideways movement in the cut extending blade life and giving a crisp; splinter-free flawless finish // Silver Ice coating resists corrosion and pitch build-up // Ideal for: crosscuts (3/4 inch to 3-1/2 inch) & rips (3/8 inch to 1-1/2 inch). // Style: Product Description This ultimate combination blade combines one Flat tooth for ripping; followed by four Alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut Anti-Vibration slots; practically eliminating the vibration that resonates in standard blades. With this ultimate combination blade; there is No need for stabilizers From the Manufacturer The LU84M series of saw blades are classic combination design with Freud quality and ingenuity. These industrial saw blades are produced with extreme precision using lasers to cut the hardened blade bodies and tensioning machines to insure the blades sta...
  • Disco de Diamante ALSKAR ADLTTS Sierra de corte en seco o húmedo de calidad suprema de 7 pulg. T segmentadas para concre
    Precio:  $17,729.00

    Disco de Diamante ALSKAR ADLTTS Sierra de corte en seco o húmedo de calidad suprema de 7 pulg. T segmentadas para concre

    -Titulo Original : ALSKAR DIAMOND ADLTTS 7 inch Supreme Quality Dry or Wet Cutting Saw T Segmented Diamond Blades for Granite Stone Concrete (7)-Fabricante : ALSKAR DIAMOND-Descripcion Original: Gives excellent deep cuttting of very hard materials such as granite, stone and concrete. // Good for curved cutting with minimal chipping. This fast cutting blade provides a clean cutting surface. // Sintered diffusion bonded. // Sgement hight 10mm. Arbor 7/8-Inch - 5/8-Inch. Size is 7"x.080"x.395"/10mm. // Size: Alskar Diamond has a very extensive standard selection of economically priced blades for general contractor usage. The ADLTTS aggressive side protected turbo segmented blade gives excellent deep cutting of very hard materials such as granite, stone and concrete. It is good for curved cutting with minimal chipping. This fast cutting blade provides a clean cutting surface...
  • disco de sierra Diablo ultra finish 7 1/4 60t (D0760x)
    Precio:  $16,049.00

    disco de sierra Diablo ultra finish 7 1/4 60t (D0760x)

    -Titulo Original : Diablo Ultra Finish Circular Saw Blade - 7 1/4in. 60 Tooth, Fine Finish, Model Number D0760X-Fabricante : Diablo-Descripcion Original: - El carburo de alta densidad TiCo proporciona un desgaste de carburo controlado que permanece más afilado durante más tiempo - El revestimiento antiadherente Perma-SHIELD protege la hoja contra el calor, el engomado y la corrosión - Corte láser superfino para cortes rápidos, duraderos y limpios - La soldadura fuerte trimetálica resistente a los golpes permite que las puntas de carburo soporten impactos extremos para una máxima durabilidad - Cuerpo de acero endurecido para una vida útil más prolongada y un borde de corte más afilado La hoja de sierra circular Diablo Ultra Finish de 7 1/4 pulg. y 60 dientes ofrece la calidad que los ebanistas finos esperan con la capacidad de manejar las condiciones extremas de la construcción profesional. -La hoja de Diablo produce un corte notablemente limpio y sin astillas que requiere poco o ningún lijado. Ideal para cortes transversales de roble, pino, melamina, contrachapado enchapado y molduras delicadas. -eje pulg. 5/8, diámetro de la hoja pulg. 7 1/4, resistente a la corrosión ventilación diseñada , cantidad de dientes. 60, Velocidad de la hoja RPM 10,000, -Cantidad de hojas. 1, tipo de punta de carburo, pulido de dientes ATB, acabado de uso de hoja. El carburo de alta densidad TiCo proporciona un desgaste controlado del carburo que se mantiene afilado durante más tiempo. El revestimiento antiadherente Perma-SHIELD protege la hoja contra el calor, el engomado y la corrosión. Ranura cortada con láser súper delgada para cortes rápidos, duraderos y limpios. puntas para soportar impactos extremos para una máxima durabilidad Cuerpo de acero endurecido para una vida más larga y un borde de corte más afilado Las ventilaciones estabilizadoras cortadas con láser atrapan el ruido y la vibración y estabilizan la hoja Las ranuras de expansión de calor cortadas con láser permiten que la hoja se expanda debido a la acumulación de calor, manteniendo el corte verdadero y recto Ideal para madera mojada ...
  • Disco Sierra FREUD LU5A25 borde de carburo de 500 mm y 120
    Precio:  $194,459.00

    Disco Sierra FREUD LU5A25 borde de carburo de 500 mm y 120

    -Titulo Original : Freud Lu5a25 500mm 120 Tooth Carbide Tipped Blade Ideal For Cutting Aluminum And Non-ferrous Metals-Fabricante : Freud-Descripcion Original: 30mm arbor and flat triple chip tooth design with positive hook angle // For cutting aluminum and non-ferrous metals // 500mm 120 tooth blade // Style: Carbide-Tipped blade ideal for cutting aluminum and non-ferrous metals incorporates Tri-Metal Brazing which consists of copper sandwiched between two layers of silver alloy to create a stronger, more impact-resistant bond between the carbide and the blade body...
  • Disco Sierra Diablo por Freud D0620X Ø152 20D E12 Madera
    Precio:  $12,529.00

    Disco Sierra Diablo por Freud D0620X Ø152 20D E12 Madera

    -Titulo Original : Diablo D0620X Rim Saw Blade-Fabricante : Diablo-Descripcion Original: N/A // Laser cut Stabilizer vents trap noise and vibration keeping it cool and reducing blade warp // Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight // Durable micro grain titanium carbide for extreme durability, razor-sharp cuts, and long life // Style: Product Description Freud D0620X Diablo 6-inch 20 tooth ATB trim saw blade with 1/2-inch Arbor. From the Manufacturer This Diablo saw blade is designed to meet the needs of the construction and remodeling market. This advanced laser cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. A permanent Perma-SHIELD coating keeps this blade free from gumming and corrosion, and laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life. This trim saw blade is proven to extend run time on Porter Cable, Saw Boss , and similar trim saws...
  • Disco de Diamante Shdiatool, Pulido de Doble Hilera(7)
    Precio:  $31,589.00

    Disco de Diamante Shdiatool, Pulido de Doble Hilera(7)

    -Titulo Original : SHDIATOOL 7 Inch Double Row Diamond Grinding Cup Wheel for Concrete Granite Marble Masonry Brick Fits 7/8 Inch Arbor-Fabricante : SHDIATOOL-Descripcion Original: Diseño de doble fila con 24 segmentos de diamante, para eje de 7/8 7 pulgadas (diámetro exterior 180 mm), cuerpo de acero fuerte de 3 mm y espesor útil de 4,5 mm 40-50 Grano de diamante para moler HORMIGÓN / ALBAÑILERÍA / GRANITO / MÁRMOL / LADRILLO ... Diseño de doble hilera para remover material agresivo y rápido El fuerte cuerpo de acero proporciona un rendimiento de corte estable y un buen acabado en el costo más bajo para ahorrar diner...
  • Disco Sierra AMANA Corte transversal 10 x 80T Atb 5/8 eje
    Precio:  $58,819.00

    Disco Sierra AMANA Corte transversal 10 x 80T Atb 5/8 eje

    -Titulo Original : A.g.e. Series - Crosscut 10 X 80t Atb 5/8 Bore (md10-800)-Fabricante : A.g.e. Series-Descripcion Original: European Style Carbide Tips // Laser Cut Expansion Slots // Precision, Heavy-Duty // Precision Ground // Made in Germany // The A. G. E. Series is an exciting line of budget-priced, industrial-quality circular saw blades for cabinet shops, professional woodworkers and discerning hobbyists. These blades are doing so well that we have expanded the line. Manufactured in Germany, to Amana Tool exacting specifications, these new blades deliver excellent performance at remarkably low price...
  • 2 Discos De Talla De Madera y Corte Para Amoladora 4Eje 5/8
    Precio:  $10,639.00

    2 Discos De Talla De Madera y Corte Para Amoladora 4Eje 5/8

    -Titulo Original : FOUUA 2Pcs Angle Grinder Saw Blade Tools, 4 In Grinder Disc 22-Teeth Steel Chainsaw Blade Wood Carving Disc For Cutting And Shaping, 5/8” Arbor, Fits 4” Or 4-1/2” Angle Grinders (Blue)-Fabricante : FOUUA-Descripcion Original: - Disco de sierra de talla de madera para molinillo: 22 dientes, eje de 5/8 , discos de molinillo de 102 mm / 4 pulgadas, la velocidad de rotación es de 10000-14000 rpm, moldeador de dientes de sierra doble antirretroceso, hoja de cadena de corte y moldeado para 100/115 ángulo moler. - Material de calidad: esta muela de madera está hecha de acero de primera calidad, cadena de 4 pulgadas de diámetro, talla de corte fino de 22 dientes, las hojas de sierra circular proporcionan una superficie de acabado suave que es ideal para un lijado mínimo después. Las cadenas de acero se pueden afilar con un lima de sierra de cadena o reemplazada según sea necesario. - Diseño seguro: el disco para tallar madera se mantiene en su lugar entre dos placas de acero que proporcionan un agarre seguro para tallar. Independientemente del grano o los nudos, la hoja corta el material con facilidad para el usuario. - Ampliamente aplicable: la motosierra de disco de amoladora angular elimina el trabajo muscular de cortar, tallar, quitar y esculpir madera, plásticos, hielo y caucho duro con su velocidad cuando funciona, velocidad máxima de hasta 14000 rpm / Excelente para trabajo curvo, como el interior de tazones, para una rápida eliminación de residuos...
  • Disco Sierra BOSCH DCB1260 Daredevil 12 x 60T Acabado fino
    Precio:  $41,619.00
    Expira: 07/06/2021

    Disco Sierra BOSCH DCB1260 Daredevil 12 x 60T Acabado fino

    -Titulo Original : Bosch Dcb1260 Daredevil 12-inch 60-tooth Fine Finish Circular Saw Blade-Fabricante : Bosch-Descripcion Original: Brute Carbide – an upgraded C3/C4 micrograin formulation for increased impact damage resistance // ATB tooth geometry – for fast cross cutting, cutoff and trim of wood and plywood // Speed coat – an antifriction finish for faster cutting with no burning or melting // Thinner kerf – provides faster cuts and less waste // Extra-hard steel blade body – delivers accuracy and resists bending and Deflection for true cuts // Size: Product description Bosch Daredevil circular saw blades apply unsurpassed technology in the construction industry by providing best-in-class performance in speed, life and ease of use. Circular saw blades from Bosch incorporate anti-friction coating and triple-sharp carbide teeth, along with a complete range of kerf widths to start sharper and stay sharper. A Speed Coat finish provides added speed and avoids binding in treated or wet lumber. Thin-kerf design provides fast cuts and less waste Control cut shoulders reduces kickback Expansion slots control blade warping Includes: Daredevil 12 in. 60 Tooth Fine Finish Circular Saw Blade - DCB1260. Amazon.com The DareDevil line of tool accessories by Bosch combines creativity with unsurpassable boldness to deliver a selection of top performing reciprocating saw blades, circular saw blades, auger bits, and spade bits. Inspired by the Godfather of Freestyle Motocross, Mike Metzger, every DareDevil accessory is built to “Work Hard, Play Hard” at every extreme. Every DareDevil accessory must be the best-in-class in at least one of the following features: speed, cutting ability, or ease-of-use. Experience a bold, daring, and captivating performance now on your jobsite. The cutting speed and durability of DareDevil reciprocating blades is top-of-the-line. With patented two-by-two tooth geometry, these blades have the ability to cut up to 20-percent faster through metal. They also have a variable tooth pitch of 5/8 teeth-per-inch, increasing the speed of chip removal while making smoother, more precise cuts. The teeth have also have a micro-blast treatment applied to them that preserves the sharpness of the blade and furthers the precision of the cutting edge. To increase durability, these blades have a powder metal steel alloy to resist higher temperatures as well as a titanium coating to reduce heat build-up. In addition, the body height and thickness of these blades have been increased to ensure straighter cuts with reduced vibration. These reciprocating blades are available in a wide selection of sizes and packs, making them perfect for the contractor, professional, or heavy duty do-it-yourselfer. Bosch's DareDevil spade bits have drilling speed and force that sets them in a performance class of their own. Designed with a patented full cone threaded tip, drilling becomes fast and effortless for these bits. Also unique to these bits is the spur and reamer feature that allows for drilling of cleaner holes. In addition to these features, the contoured paddle design is what really sets these spade bits apart from the rest of the market. This design allows for chip removal to be reached at higher speeds than ever. With chipping speeds this high, DareDevil has added a hex shank power groove at the end of the bit to further reduce slippage during use. These spade bits are available in a wide selection of sizes and packs, making them perfect for the contractor, professional, or heavy duty do-it-yourselfer. Nail killing auger bits are signature to DareDevil in their best-of-class nail-hitting ability and user ease. Built with dual cutting edges and a reinforced tip, these auger bits balance easier nail cutting and accurate drilling with the power to withstand repeated nail hits. To ensure the quality and accuracy of both entry and exit holes, these auger bits have been built with a reamer edge. To improve chip removal, these bits have an open-faced flute design. They also have a reinforced spine for that crucial extra strenght needed when performing heavy-duty application. All of these features combine to decrease the torque impact on nail hits by up to 61-percent while increasing the life of nails up to 9-times. These auger bits are available in a wide selection of sizes and packs, making them perfect for the contractor, professional, or heavy duty do-it-yourselfer. All DareDevil accessories are backed by a one-year limited warranty. In the instance of manufacturer defects, the item will be backed for one full year by the warranty. Damages caused by use of the product are not covered under the warranty...
  • Disco Sierra Diablo Por Freud D1050x Ø254 50d E16 Uso Gral
    Precio:  $25,999.00

    Disco Sierra Diablo Por Freud D1050x Ø254 50d E16 Uso Gral

    -Titulo Original : Diablo D1050X Combination Saw Blade-Fabricante : Diablo-Descripcion Original: N/A // Imported // The product is 10x50T Diablo Blade // Easy to use // The product is manufactured in Italy // Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp // Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight // Style: Product Description The Diablo 10in. 50 Tooth Combination Circular Saw Blade is ideal for ripping and crosscutting wood and wood composites, while leaving a smooth finish. This blade is the best choice for a table saw when one blade is needed for ripping and crosscutting. Each set of 5 teeth is separated by a large gullet. Diablo's large gullet provides the chip removal space required while ripping, and the close grouping of teeth with the set provides the smaller bit size required when crosscutting. Features a super-thin laser cut kerf, Perma-SHIELD nonstick coating, tri-metal shock-resistant brazing and more. For use on miter saws and table saws. Arbor Knockout No, Arbor Size in. 5/8, Corrosion Resistant Yes, Teeth qty. 50, Blade Diameter in. 10, Blade Speed RPM 7,000, Blades qty. 1, Tip Type Carbide, Tooth Grind Combination, Anti Stick Rim Yes, Blade Use Wood, wood composite. Super-thin laser cut kerf for fast, durable and clean cuts TiCo hi-density carbide provides a controlled carbide wear that stays sharper longer Perma-SHIELD nonstick coating shields the blade against heat, gumming and corrosion Tri-metal shock-resistant brazing allows carbide tips to withstand extreme impact for maximum durability Hardened steel body for longer life and a sharper cutting edge Amazon.com For a multi-purpose blade that makes clean rips and crosscuts in both wood and wood composites, look no further than the Freud D1050X Diablo 10-Inch Combination Saw Blade. This is your go-to tool when one blade is needed for ripping and crosscutting. This blade's large gullet provides ample space for effective ripping, while its closely-grouped teeth achieve smooth crosscuts. For strong, long-lasting resistance, the blade features a tough steel plate and high-density carbide tips. Model #D1050XDiameter10Machine UseMiter Saw, Table SawApplicationCombinationTeeth50 ATB (Alternate-Top Bevel)Arbor5/8Kerf.098Hook Angle15° Achieving premium results when ripping and crosscutting a mix of wood and wood composites is all about clean, accurate cuts. The Freud D1050X makes this process easy, fast, and precise. And its multi-purpose versatility minimizes blade changes between tasks, which ultimately saves you time.The Freud D1050X's five blades are separated by large gaps and notched with closely-grouped teeth. This combination design offers you the high tooth count required for clean crosscutting, along with the large chip-removal space required for hassle-free ripping.Contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for those projects that need just one blade to handle both ripping and crosscutting. This blade can be used to cut through wood and wood composites, such as particleboard and medium-density fiberboard (MDF). The Freud D1050X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 50 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life. So you can count on it over the long term, the Freud D1050X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion. The Freud D1050X is a great addition to your workshop because it's designed with the versatility to fit a variety of miter and table saws.This product is covered by Freud's Limited Lifetime Warranty. Freud D1050X Diablo 10-Inch Combination Saw Blade. See all Product descriptio...
  • Disco Sierra VORTEX VGSB 7 1/4 x 24T TCT Madera dura y bla
    Precio:  $9,459.00

    Disco Sierra VORTEX VGSB 7 1/4 x 24T TCT Madera dura y bla

    -Titulo Original : Vortex Diamond Vgsb 7-1/4 Inch 24 Teeth Tct General Purpose Hard & Soft Wood Saw Blade (7-1/4 Inch 24 Teeth)-Fabricante : Vortex Diamond-Descripcion Original: High quality and professional grade for ripping and cross cutting of thick hardwood to 3-1/2" thick and softwood to 1" thick. // The blades can be used on Circular Saws, Table Saws, Miter Saws, Hand Saws and Chop Saws. // Ideal for cutting hardwood, softwood, exotic wood and abrasive wood. // Thin kerf allwos a smooth finish with minimum waste. Lower hood angle improves the surface quality of the cut and increases the feed pressure. // 1.2 mm thin kerf design. 5/8" Arbor. // Size: Vortex Diamond provides a high quality and professional grade wood saw blade for ripping and cross cutting of thick hardwood to 3-1/2 thick and softwood to 1 thick. The blades can be used on Circular Saws, Table Saws, Miter Saws, Hand Saws and Chop Saws.It is ideally used for cutting hardwood, softwood, exotic wood and abrasive wood...
  • Disco Sierra AMANA Ingleteadora Tkt Thin Kerf 10 x 40T (MD
    Precio:  $47,879.00

    Disco Sierra AMANA Ingleteadora Tkt Thin Kerf 10 x 40T (MD

    -Titulo Original : A.g.e. Series - Tkt Thin Kerf Miter 10 X 40t (md10-406tb)-Fabricante : A.g.e. Series-Descripcion Original: European Style Carbide Tips // Laser Cut Expansion Slots // Precision, Heavy-Duty // Precision Ground // Made in Germany // The A. G. E. Series is an exciting line of budget-priced, industrial-quality circular saw blades for cabinet shops, professional woodworkers and discerning hobbyists. These blades are doing so well that we have expanded the line. Manufactured in Germany, to Amana Tool exacting specifications, these new blades deliver excellent performance at remarkably low price...
  • Brocas en forma de T ajustables de 3 dientes vástago 1/2
    Precio:  $11,809.00

    Brocas en forma de T ajustables de 3 dientes vástago 1/2

    -Titulo Original : Tongue And Groove Router Bit Set, Newdeli Tongue And Groove Router Bit Set, 1/2 Shank 3 Teeth Adjustable T Shape Routers For Woodworking For Wood Door Flooring Cupboard Cutting-Fabricante : Newdeli-Descripcion Original: - [USO MULTIUSO] Adecuado para cantear, vetear y ranurar en todos los proyectos de carpintería tanto para profesionales como para aficionados. Puede crear uniones machihembradas para proyectos como pisos, rieles y montantes, y muchos más. - [SUGERENCIA DE USO] Deberá ajustar el espacio en el cortador doble para hacer la unión según sus especificaciones. Quite la tuerca y quite los espaciadores según sea necesario. - [MATERIAL PREMIUM] Cuerpos sólidos de acero endurecido con diseño anti-retroceso en forma de T de 3 dientes para una instalación segura, una broca de enrutador de ranura y lengüeta confiable para sus proyectos de carpintería. - [MANO DE OBRA DE CALIDAD] Broca de ranura y lengüeta ajustable de calidad industrial, cuerpo de acero endurecido resistente, mano de obra de hoja afilada para cortes más suaves y madera sin rebabas después del corte, 1/2 vástago mantiene un buen equilibrio en el enrutador para garantizar su seguridad...
Mostrar del 1 al 24 (de 737 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]