Accesorios para Herramientas > Discos > Discos de Corte
-
Precio: $683,369.00
-
Precio: $376,159.00
-
Precio: $263,149.00
-
Precio: $61,369.00
-
Precio: $128,399.00
-
Precio: $501,439.00
-
Precio: $71,849.00
-
Precio: $127,869.00
-
Precio: $609,629.00
-
Precio: $155,439.00
-
Precio: $673,649.00
-
Precio: $103,749.00
-
Precio: $69,499.00
-
Precio: $83,029.00
-
Precio: $163,679.00
-
Precio: $76,549.00
-
Precio: $95,139.00
-
Precio: $200,919.00
-
Precio: $93,339.00
-
Precio: $103,749.00
-
Precio: $295,359.00
-
Precio: $231,099.00
-
Precio: $475,049.00
-
Precio: $166,989.00
-
Precio: $683,369.00
Disco Sierra Freud Lu97r014 355mm x 108T dobre cara
-Titulo Original : Freud LU97R014: 14 X 108T Double Sided Laminate/Melamine Blade-Fabricante : Freud-Descripcion Original: Especificaciones: eje 1 pulgada, diámetro 14 pulgadas, molienda TCG, ángulo de gancho -3°, corte .138 pulgadas, placa .098 pulgadas, dientes 108 Mezcla laminada de carburo de alta densidad TiCo para un máximo rendimiento Diseño de dientes de triple chip (TCG) con un ángulo de gancho positivo para una larga vida útil en aplicaciones de producción Las ranuras antivibración cortadas con láser reducen drásticamente la vibración y el movimiento lateral en el corte extendiendo la vida útil de la hoja y dando un acabado impecable nítido y sin astillas El revestimiento antiadherente Perma-Shield reduce el arrastre de la hoja, protege la hoja de la corrosión y la acumulación de tono. Diseñado para dar una larga vida útil y un excelente acabado en la parte superior e inferior de laminados, melamina y madera contrachapada chapada. El diseño antivibración cortado con láser produce la placa acústicamente muerta. Esto reduce el movimiento lateral del borde de corte para evitar que se astillen materiales sintéticos como laminados. Esto prolonga drásticamente la vida útil y el acabado del corte. No se necesitan cuchillas de puntuación con esta cuchilla Mezcla laminada de carburo de alta densidad TiCo para un máximo rendimiento. Diseño de dientes de triple chip (TCG) con un ángulo de gancho positivo para una larga vida útil en aplicaciones de producción. Las ranuras antivibración cortadas con láser reducen drásticamente la vibración y el movimiento lateral en el corte, prolongando la vida útil de la hoja y dando un acabado impecable nítido y sin astillas. El revestimiento antiadherente Perma-Shield reduce el arrastre de la cuchilla, protege la hoja de la corrosión y la construcción d-up.... -
Precio: $376,159.00
Disco Sierra FREUD LU5D02 190mm 54T Carburo con borde para
-Titulo Original : Freud Lu5d02 190mm 54 Tooth Carbide Tipped Blade For Cutting Aluminum And Non-ferrous Metals-Fabricante : Freud-Descripcion Original: 30mm arbor and flat triple chip tooth design with negative hook angle // For cutting aluminum and non-ferrous metals // 190mm 54 tooth blade // Style: 190 mm x 54T carbide Tipped blade for cutting aluminum and non-ferrous metal... -
Precio: $263,149.00
Disco Sierra Diablo Por Freud D1060 Ø254 60d E16 Acabado
-Titulo Original : Diabo by Freud D1060X Diablo 10-Inch 60 Tooth Hi-ATB Fine Finish Saw Blade-Fabricante : Diablo-Descripcion Original: N/A // Imported // TiCo Hi-Density carbide specifically designed for each application to increase performance // Perma-SHIELD Non-stick Coating protects from heat, gumming, & corrosion // Super thin laser cut kerf for fast, durable, and clean cuts // Made in Italy // Size: Product Description FREUD D1060X Diablo 10-inch 60 tooth ATB fine finish saw blade with 5/8-inch arbor and permashield coating. Amazon.com For a clean-cutting blade that creates smooth finish cuts in material such as veneer plywood and delicate hardwood, look no further than the D1060X Diablo 10-Inch Fine-Finish Saw Blade. This is your go-to blade for slicing through oak, pine, melamine, veneer plywood, and delicate molding. This blade's high tooth count minimizes grabbing of the workpiece, producing cuts that require little to no sanding. For strong, long-lasting resistance, the blades feature a tough steel plate and high-density carbide tips. Achieving attractive results when working with fine finish material is all about clean, accurate cuts. The Freud D1060X makes this process easy, fast, and precise. To save you time, most cuts made by this blade require little to no sanding.Trim carpenters, fine cabinetmakers, and avid do-it-yourselfers will want to keep this blade on hand for those special jobs that call for making smooth crosscuts in fine finish work. Appropriate application materials include oak, pine, melamine, veneer plywood, and delicate molding. The Freud D1060X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade's 60 Hi-ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life. So you can count on it over the long term, the Freud D1060X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion. The Freud D1060X is a great addition to your workshop because it's designed with the versatility to fit a variety of miter and table saws.This product is covered by Freud's Limited Lifetime Warranty. Freud D1060X Diablo 10-Inch Fine-Finish Saw Blade. See all Product descriptio... -
Precio: $61,369.00
pack de 4 discos de tira facil con vastago hexagonal de 1/4
-Titulo Original : ZORUNNA 2 4Pcs Quick Change Easy Strip Discs With 1/4 Hex Shank, Paint Stripper Wheel For Removing Paint, Cleans Welds Rust Removal.-Fabricante : ZORUNNA-Descripcion Original: - Resistentes y afilados - Con una base de malla de fibra robusta, los discos de tira vienen con partículas abrasivas firmemente adheridas para una potente fuerza de corte. No hay miedo de que los gránulos de arena se caigan a mitad de la molienda. - Rectificado altamente efectivo: esta herramienta decapante de pintura de alta velocidad reduce la pintura y la imprimación hasta dejar el metal desnudo más rápido que las lijadoras normales. Mejoran sin esfuerzo el revestimiento y la superficie sin causar ningún daño. Perfecto para eliminar rápidamente óxido y pintura e ideal para pulir estructuras metálicas. - Vástago hexagonal sólido de 1/4: el juego incluye seis discos de 2 tiras con un vástago hexagonal sólido de 1/4 que es fácil de sostener y asegurar. Ideal para herramientas rotativas y amoladoras con una velocidad de rotación máxima de 15.000 RPM. - Funcionamiento seguro y silencioso: el diseño de panal flexible del disco de tira ayuda a prevenir la acumulación de virutas, partículas de molienda voladoras y chispas. Deja las superficies claras, brillantes y libres de decoloración inducida por el calor. - Amplia aplicación: estas ruedas quitapinturas destacan en la eliminación de pintura y adhesivos, la limpieza de líneas de soldadura, la eliminación de oxidación y la preparación de superficies de carrocerías. - LA SEGURIDAD ES LO PRIMERO: utilice siempre gafas de seguridad, una máscara y guantes protectores cuando utilice el disco decapante de pintura...
-
Precio: $128,399.00
2 Ruedas De Pulido Fino Para Amoladora Angular 12 Capas
-Titulo Original : 8 White Airway Buffing Wheel,5/8 Arbor Hole,12 Plys/Fine Polishing For Angle Grinder,2PCS-Fabricante : FANXIANG-Descripcion Original: ?For polishing vehicle parts such as wheels,tanks,bumpers,fenders,etc.Or any other metal trim/part of aluminum, brass, copper and stainless steel. // ?Galvanized center ring is resit-corrosion and durable. // ?Recommended Maximum RPM Safety Limits 3000 // ?Airway Design Allows to buff longer and cooler than standard buffs. // ?Diameter: 8" Face,5/8 inch Inner Arbor Hole,12plys. //... -
Precio: $501,439.00
Disco Sierra AMANA DT200T36 20 borde de carburo con borde
-Titulo Original : Amana Tool - Dt200t36-20 Carbide Tipped Ditec 2000 Adjustable Type Scoring 200mm Dia X 36t-Fabricante : Amana Tool-Descripcion Original: Material: hss-bimetal // Special feature: with ejection spring and safety STOPPER // The hole saw can be used with a power-change adapter // The cutting quality depends on the correct speed and the coolant used (see operating instructions). the diameters 16-22 mm are without Ejection spring... -
Precio: $71,849.00
Disco De Moldeo De Madera Para Amoladora Angular - Eje 7/8
-Titulo Original : DEWAYTOOLS 4-1/3Inch(110mm) Wood Shaping Disc Grinder Shaping Disk,Abrasive Disc 7/8Inch(22mm) Bore Fit For All 4-1/2 Or 5 Inch Angle Grinders(Silver,Curve)-Fabricante : DEWAYTOOLS-Descripcion Original: - El diámetro es de 4-1/3 pulgadas (110 mm) y el eje es de 7/8 pulgadas (22 mm). En comparación con otros discos moldeadores de 100 mm, este disco moldeador tiene más espinas de acero de carburo de tungsteno, un área más grande y una extracción más rápida; - La rueda de moldeado cuenta con cientos de dientes de corte libre de carburo de tungsteno extremadamente afilados, dispuestos en un patrón regular de filas y columnas, que eliminan el inventario rápidamente y se mantienen afilados durante un uso prolongado. También son adecuados para dar forma a tallas grandes y asientos de sillas. como otras aplicaciones. - Indicado para una rápida remoción y modelado, especialmente para zonas convexas y cóncavas. Proporciona una rápida eliminación de material, ahorrando tiempo y esfuerzo, adecuado para trabajos curvos. - Solo debe usarse en materiales no metálicos o no metálicos, apto para madera y otros materiales. - Se adapta a amoladoras angulares de 4-1/2 pulgadas (115 mm) o 5 pulgadas (125 mm); Cenador (agujero central): 7/8 de pulgada (22 mm); Velocidad máxima (RPM): 13000- El diámetro es de 4-1/3 pulgadas (110 mm) y el eje es de 7/8 pulgadas (22 mm). En comparación con otros discos moldeadores de 100 mm, este disco moldeador tiene más espinas de acero de carburo de tungsteno, un área más grande y una extracción más rápida; - La rueda de moldeado cuenta con cientos de dientes de corte libre de carburo de tungsteno extremadamente afilados, dispuestos en un patrón regular de filas y columnas, que eliminan el inventario rápidamente y se mantienen afilados durante un uso prolongado. También son adecuados para dar forma a tallas grandes y asientos de sillas. como otras aplicaciones. - Indicado para una rápida remoción y modelado, especialmente para zonas convexas y cóncavas. Proporciona una rápida eliminación de material, ahorrando tiempo y esfuerzo, adecuado para trabajos curvos. - Solo debe usarse en materiales no metálicos o no metálicos, apto para madera y otros materiales. - Se adapta a amoladoras angulares de 4-1/2 pulgadas (115 mm) o 5 pulgadas (125 mm); Cenador (agujero central): 7/8 de pulgada (22 mm); Velocidad máxima (RPM): 1300... -
Precio: $127,869.00
Disco Sierra BOSCH DCB740 7 1/4 pulg. Acabado portátil Dar
-Titulo Original : Bosch Dcb740 7-1/4 In. 40 Tooth Daredevil Portable Saw Blade Finishing-Fabricante : Bosch-Descripcion Original: Triple-sharp teeth for fast, clean cuts // Premium Bosch C3 carbide starts sharp and stays sharp // Thin kerf with extra-hard plate for less waste and increased accuracy // Speed Coat finish reduces friction and heat // 5/8 In. arbor with diamond knockout // Size: Product Description 40 teeth for a fine finish and long life in standard or worm drive saws. High tooth count provides excellent finish in wood, plywood and other construction materials. Bosch C3 carbide tips stay sharper longer and resist damage from nails and staples. Fits most saw brands and models, including worm drive. Ideal for finish work in remodeling and general construction. Amazon.com The DareDevil line of tool accessories by Bosch combines creativity with unsurpassable boldness to deliver a selection of top performing reciprocating saw blades, circular saw blades, auger bits, and spade bits. Inspired by the Godfather of Freestyle Motocross, Mike Metzger, every DareDevil accessory is built to “Work Hard, Play Hard” at every extreme. Every DareDevil accessory must be the best-in-class in at least one of the following features: speed, cutting ability, or ease-of-use. Experience a bold, daring, and captivating performance now on your jobsite. The cutting speed and durability of DareDevil reciprocating blades is top-of-the-line. With patented two-by-two tooth geometry, these blades have the ability to cut up to 20-percent faster through metal. They also have a variable tooth pitch of 5/8 teeth-per-inch, increasing the speed of chip removal while making smoother, more precise cuts. The teeth have also have a micro-blast treatment applied to them that preserves the sharpness of the blade and furthers the precision of the cutting edge. To increase durability, these blades have a powder metal steel alloy to resist higher temperatures as well as a titanium coating to reduce heat build-up. In addition, the body height and thickness of these blades have been increased to ensure straighter cuts with reduced vibration. These reciprocating blades are available in a wide selection of sizes and packs, making them perfect for the contractor, professional, or heavy duty do-it-yourselfer. Bosch's DareDevil spade bits have drilling speed and force that sets them in a performance class of their own. Designed with a patented full cone threaded tip, drilling becomes fast and effortless for these bits. Also unique to these bits is the spur and reamer feature that allows for drilling of cleaner holes. In addition to these features, the contoured paddle design is what really sets these spade bits apart from the rest of the market. This design allows for chip removal to be reached at higher speeds than ever. With chipping speeds this high, DareDevil has added a hex shank power groove at the end of the bit to further reduce slippage during use. These spade bits are available in a wide selection of sizes and packs, making them perfect for the contractor, professional, or heavy duty do-it-yourselfer. Nail killing auger bits are signature to DareDevil in their best-of-class nail-hitting ability and user ease. Built with dual cutting edges and a reinforced tip, these auger bits balance easier nail cutting and accurate drilling with the power to withstand repeated nail hits. To ensure the quality and accuracy of both entry and exit holes, these auger bits have been built with a reamer edge. To improve chip removal, these bits have an open-faced flute design. They also have a reinforced spine for that crucial extra strenght needed when performing heavy-duty application. All of these features combine to decrease the torque impact on nail hits by up to 61-percent while increasing the life of nails up to 9-times. These auger bits are available in a wide selection of sizes and packs, making them perfect for the contractor, professional, or heavy duty do-it-yourselfer. All DareDevil accessories are backed by a one-year limited warranty. In the instance of manufacturer defects, the item will be backed for one full year by the warranty. Damages caused by use of the product are not covered under the warranty...
-
Precio: $609,629.00
Disco de Diamante MAKITA A-96207 antivibración una hilera 7 pulg.
-Titulo Original : Makita A-96207 Anti-Vibration Diamond Cup Wheel, Single Row, 7-Fabricante : MAKITA-Descripcion Original: Anti-vibration design engineered to keep the wheel planted firmly on the surface for more efficient material removal // Double row design for a smoother finish than single row wheels // Innovative design reduces chattering for an improved operator experience // Use with Makita Dust Extracting Surfacing Shroud for a cleaner work environment // Hubbed design for quick wheel changes; 5/8"-11 arbor // Style: | Size: The Makita A-96207 4-1/2 Anti-Vibration Diamond Cup Wheel has an Anti-Vibration Design for Improved Performance and Added Operator Comfort... -
Precio: $155,439.00
Disco De Corte Metal DeWALT 180x3x16mm Para Metal
-Titulo Original : DEWALT 7-Inch Metal Cutting Blade, 5-Pack (DW3511B5)-Fabricante : DEWALT-Descripcion Original: - El grano de carburo de silicio premium de la hoja de corte de metal está diseñado para una larga vida útil y un corte rápido - La mezcla patentada de materiales garantiza ruedas duraderas y de larga duración - 2 láminas completas de fibra de vidrio para mayor durabilidad y seguridad - Eje de diamante para uso con sierras de tornillo sin fin. Dimensiones: 7 x 1/8 x 5/8 pulgada... -
Precio: $673,649.00
Disco Sierra AMANA Tkt Thin Kerf Melamina 12 X 96T (MD12 9
-Titulo Original : A.g.e. Series - Tkt Thin Kerf Melamine 12 X 96t (md12-963tb)-Fabricante : A.g.e. Series-Descripcion Original: European Style Carbide Tips // Laser Cut Expansion Slots // Precision, Heavy-Duty // Precision Ground // Made in Germany // The A. G. E. Series is an exciting line of budget-priced, industrial-quality circular saw blades for cabinet shops, professional woodworkers and discerning hobbyists. These blades are doing so well that we have expanded the line. Manufactured in Germany, to Amana Tool exacting specifications, these new blades deliver excellent performance at remarkably low price... -
Precio: $103,749.00
Cortador Chapa Metálica Para Taladro Eléctrico + Accesorios.
-Titulo Original : Electric Drill Plate Cutter Sheet Metal Cutter - Electric Drill Shears Attachment Cutter Nibbler Double Headed Drill Plate Cutter Attachment For Cutting Metal Plates Hard Materials #2 (Extra Large)-Fabricante : XDGGCSY-Descripcion Original: - Materiales de alta calidad: Materiales de alta calidad - Este cortador de placa de perforación está hecho de acero y hierro de alta calidad, que tiene buena resistencia al desgaste y alta dureza, por lo que tiene una vida útil más larga. Este cortador de placas de perforación eléctrica puede cortar láminas de metal de 0,8 mm de espesor, lo que ahorra más trabajo y es más rápido que las cizallas comunes. - Compatible con la mayoría de los taladros: este cortador de chapa es compatible con la mayoría de los taladros manuales, taladros de iones de litio y taladros de impacto, satisfaciendo así mejor sus necesidades. Si tienes alguna duda sobre el modelo adaptado, puedes contactar con nosotros. - Corte preciso fácil de instalar: este cortador de chapa es fácil de instalar en su taladro eléctrico. Si tiene algún problema de instalación, puede consultar las instrucciones y el vídeo o consultarnos. Hay ranuras de posicionamiento en el cortador de metal para ayudarle a cortar varias piezas metálicas con precisión. - Amplia gama de aplicaciones: esta perforadora eléctrica es adecuada para cortar placas de metal (placa de hierro de 0,2 a 1 mm, placa blanca de 0,3 a 1 mm, placa de acero de 0,2 a 0,8 mm, placa de cobre de 0,3 a 1,2 mm, placa de aluminio de 0,3 a 1,2 mm). , materiales corrugados, tuberías, perfiles complejos, materiales con recubrimiento en polvo, fibra de vidrio, etc. - Lo que obtendrá: este accesorio de taladro incluye 1 - cortador de placa de taladro eléctrico (taladro eléctrico no incluido), 1 - llave, 1 - llave hexagonal, 1 - mango. Nota: No se recomienda cortar material de aleación especial de alta dureza, de lo contrario dañará la máquina...
-
Precio: $69,499.00
Escuadra Combinada Irwin Tools, Cuerpo De Metal, 6 Pulgadas
-Titulo Original : IRWIN Tools Combination Square, Metal-Body, 6-Inch (1794468)-Fabricante : Irwin Tools-Descripcion Original: - Las escalas negras grabadas con precisión en este cuadrado combinado brindan lecturas precisas de 90* y 45* - Esta Escuadra Combinada Tiene Un Cuerpo De Zinc Fundido Para Mayor Durabilidad - Una hoja de acero inoxidable está diseñada para uso rudo - Pais de origen: China Esta escuadra de combinación de metal IRWIN cuenta con un cuerpo de zinc fundido y una hoja de acero inoxidable a prueba de herrumbre para garantizar un uso duradero. Las escalas negras grabadas con precisión le brindan lecturas precisas de 90* y 45*... -
Precio: $83,029.00
Disco Sierra OSHLUN SBW 065024 6 1/2 x 24T ATB Propósito g
-Titulo Original : Oshlun Sbw-065024 6-1/2-inch 24 Tooth Atb General Purpose And Framing Saw Blade With 5/8-inch Arbor (diamond Knockout)-Fabricante : Oshlun-Descripcion Original: Super Thin Kerf for Fast Cuts // Professional Grade Carbide // Anti-Kickback Tooth Design // Expansion Slots to Prevent Warping // Precision Ground Carbide Tips // Size: Product Description Our general purpose and framing blades have been designed for quick, clean cutting with various portable saws. They are ideal for cutting of all types of hardwood, softwood, particle board and plywood. The aggressive hook angle and super thin kerf make for fast and easy cutting. Other features include an anti-kickback tooth design for added safety and heat vents for cooler operation resulting in extended blade life. The long lasting micro grain carbide is precision ground to ensure the best possible cut. From the Manufacturer Our general purpose and framing blades have been designed for quick, clean cutting with various portable saws. They are ideal for cutting of all types of hardwood, softwood, particle board and plywood. The aggressive hook angle and super thin kerf make for fast and easy cutting. Other features include an anti-kickback tooth design for added safety and heat vents for cooler operation resulting in extended blade life. The long lasting micro grain carbide is precision ground to ensure the best possible cut... -
Precio: $163,679.00
Disco de Diamante BOSCH DD4510H de puntal de bocadillo premium Sandwich de 4-1/2 pulg.
-Titulo Original : Bosch DD4510H 4-1/2-Inch Premium Sandwich Tuckpointing Diamond Blade-Fabricante : BOSCH-Descripcion Original: By combining all segments and a superior diamond/metal mix with an ultra-efficient and fast sandwich-blade design // Durable Design - Connected blades optimize performance over stacked blades with washer // Up to 3 times Life - Premium diamond formulation for aggressive removal // Typical applications for tuckpointing blades include mortar removal in brick buildings and grout removal in commerical tile applications that include waste water treatment plants and subway tunnels // Bosch sandwich tuckpointing diamond blades provide a cost-effective, high-quality option for tuckpointers working in mortar and grout... -
Precio: $76,549.00
Disco de Diamante para Pulido Y Facetado 180 Grit
-Titulo Original : Uxcell 6-inch Grit 180 Diamond Coated Flat Lap Wheel Grinding Disc Polishing Tool-Fabricante : Uxcell-Descripcion Original: - 6 pulgadas de diámetro exterior, grano 180, rueda de disco de vuelta plana recubierta de diamante galvanizado de calidad. - Las ruedas de vueltas planas tienen un orificio de eje de 5/8 de pulgada. - Son absolutamente planos y paralelos para cumplir con los requisitos de facetado más exigentes. - Para moler y pulir vidrio, roca, piedra, granito, etc. - Recomendado para rectificado basto y fino en material de facetado, además de rectificado lapidario general cuando se requiere precisión. 1,6 pulgadas de diámetro exterior, grano 180, rueda de disco de vuelta plana recubierta de diamante galvanizado de calidad. 2. Las ruedas de vueltas planas tienen un orificio de eje de 5/8 de pulgada para la amoladora angular. 3.Son absolutamente planos y paralelos para cumplir con los requisitos de tallado más exigentes. 4. Para moler y pulir vidrio, roca, piedra, granito, etc. 5. Recomendado para rectificado basto y fino en material de facetado, además de rectificado lapidario general cuando se requiere precisión. Especificación: Nombre del producto: Disco de diamante Contenido del paquete: 1 x Disco de diamante Peso: 146 g Material: Metal, Diamante recubierto Color: Tono plateado Diámetro exterior: 150 mm/6 pulgadas Diámetro del orificio del eje: 16 mm/5/8 pulgadas Grosor: 1 mm/ Grano de 0,04 pulgadas: 18...
-
Precio: $95,139.00
Disco Sierra WHIRLWIND 5 3/8 x 30T TCT Propósito general M
-Titulo Original : Whirlwind Usa Mgsb 5-3/8 Inch 30 Teeth Carbide-tipped Circular Saw Blade For Hard & Soft Wood Saw Blade 7/8-5/8 Arbor (5-3/8-inch 30 Teeth)-Fabricante : Whirlwind Usa-Descripcion Original: High quality and professional grade for ripping and crosscu tting of thick hardwood to 3-1/2" thick and softwood to 1" thick. // The blades can be used on Circular Saws, Table Saws, Miter Saws, Hand Saws and Chop Saws. // Ideal for cutting hardwood, softwood, exotic wood and abrasive wood. // Thin kerf allwos a smooth finish with minimum waste. Lower hood angle improves the surface quality of the cut and increases the feed pressure. // 1.1 mm thin kerf design. 7/8-5/8" Arbor. //... -
Precio: $200,919.00
Disco Sierra PROXXON 28732 3 9/64 x 80 mm de carburo con b
-Titulo Original : Proxxon 28732 3-9/64-inch 80mm Carbide Tipped Saw Blade 36-teeth-Fabricante : Proxxon-Descripcion Original: May also be used for cutting hard wood, polycarbonate, plastics and aluminum // From the Manufacturer Proxxon carbide tipped saw blade, 3-1/8-Inch by 1/16-Inch by 3/8-Inch (80 by 1.6 by 10mm). 36-Teeth, extremely clean cutting edges when cutting balsa wood, plywood, or soft wood as well as glass-fiber reinforced plastics (GRP) because of large number of teeth. Fits proxxon circular table saw FKS/E, number 38070 and KGS 80 chop and miter saw, number 37160... -
Precio: $93,339.00
4 Uds. Hojas de sierra oscilantes de carburo de diamante
-Titulo Original : Xxgo 4 Pcs Diamond Carbide Oscillating Multi Tool Semi Circle Finger Segment Swing Grit Grout Saw Blades Xg4004-Fabricante : Xxgo-Descripcion Original: On April, 27 1978, Foreigner played a sold-out show at London’s celebrated Rainbow Theatre. Forty years later, the memorable performance by the original band has been restored from the original film reels, remixed and remastered for an unforgettable and highly collectible release.-LIVE AT THE RAINBOW ’78 includes hit singles “Feels Like The First Time” and “Cold As Ice,” from their eponymous debut album, as well as tracks from their Double Vision album, “Hot Blooded” and “Double Vision.... -
Precio: $103,749.00
Disco Moldeado De Madera Para Amoladoras 41/2 Eje De 7/8
-Titulo Original : OBA Wood Carving Disc For Angle Grinder 4 1/2 Inch, Wood Shaping Grinding Wheel With 7/8” Arbor-Fabricante : OBA-Descripcion Original: - -Universal Applicability: Diameter is 4-1/2 inch and arbor is 7/8 inch so this size can fit all 115 mm and 125 mm angle grinders in the market. - -High Premium Material: This cavring dics is made by premium Carbon steel which has the higher hardness and longer life. - -Application: This wheel can be used for wooden materials,grinding,carving and any other DIY wood works. - -Unique Design: Depend on the special thorn design,this grinding wheel is powerful and more efficient than other grinding wheels. - -Notice: This wood shaping grinder wheel should be used on non-metals or non-metal materials. ...
-
Precio: $295,359.00
Disco Sierra FREUD 12 x 48T Thin Kerf Propósito general (L
-Titulo Original : Freud 12 X 48t Thin Kerf General Purpose Blade (lu86r012)-Fabricante : Freud-Descripcion Original: Premium TiCo HI-Density Carbide General Purpose Blend for Maximum Performance // Heavy-Duty Thick Kerf and Plate ensure a stable, flat blade for long cutting life ensure a stable, flat blade for long cutting life // Positive Hook Angles for fast cutting and easy feed // Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up. // Style: Product Description This heavy-duty thin kerf blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials. The ideal working range is from 3/4 to 3-1/2 thick for crosscutting, and 1/4 to 1 thick for ripping. Thinner or thicker material may be cut, but some loss of surface finish may occur. 12 Blade Diameter, 1 Arbor, 48 ATB Teeth, ATB Grind, .094 Kerf (K), 13° Hook Angle, .071 Plate (P) Ideal For: For Heavy-Duty General Purpose Applications. Crosscuts (3/4 to 3-1/2) & Rips (1/4 to 1 ). Application: General Purpose. Made In Italy. Amazon.com The 12-inch LU86R012 Thin Kerf General-Purpose Saw Blade is a versatile blade that's equally suited to ripping and crosscutting. It pairs a heavy-duty body with 48 teeth featuring TiCo high-density carbide tips, and it is coated with Freud's Perma-SHIELD. Plus, since it's a thin-kerf blade, it wastes less material and continues to cut cleanly when used with underpowered saws. This blade's alternating-top-bevel (ATB) configuration features teeth that face both left and right, and it delivers a positive hook angle--a setup that makes feeding smooth and easy. Ideal for crosscutting thick hard- and softwoods as well as slicing through thinner sheets of plywood, chipboard, and laminate, this blade brings both versatility and durability to the job site.It's designed for optimal performance when crosscutting materials that are 3/4 to 3-1/2 inches thick or ripping materials that are 1/4 to 1-inch thick. The blade can also handle working with chipboard, plywood, or laminate, and it can tackle thinner or thicker materials. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 1-inch arbor and produces a 0.094 kerf. This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use. This general-purpose saw blade's 48 teeth are finished with tips made from Freud's application-specific TiCo high-density carbide general purpose blend. This blend offers a mix of improved density, hardness, corrosion resistance, heat resistance, and impact resistance that's ideally matched to the varied demands placed on a general-purpose blade.With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer--saving you time and money. Built to withstand tough use in less-than-ideal conditions, this blade is finished with Freud's red Perma-SHIELD--a non-stick coating that reduces friction and nearly eliminates the heat buildup that excess friction can cause. By providing complete thermal insulation, this coating protects your tools and your work surface. And it resists binding when the blade is used for large-volume cutting applications, which reduces blade warp.As a lubricating feature, Perma-SHIELD allows the blade to spin freely while reducing stress on the motor and carriage of your saw. In addition, this coating helps prevent debris collection and resin or pitch buildup. Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup is another little convenience that translates into longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.This industrial saw blade is backed by Freud's limited lifetime warranty. An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more. Freud LU86R012 Thin Kerf General-Purpose Saw Blad --12-inch diameter, 1-inch arbor, 48-tooth design. See all Product descriptio... -
Precio: $231,099.00
Black and decker Accesorio para sierra BDCDMT112
-Titulo Original : BLACKDECKER Matrix Attachment, Trim Saw (BDCMTTS)-Fabricante : BLACKDECKER-Descripcion Original: - Para usar con BLACK+DECKER BDEDMT y BDCDMT112 - Potente rendimiento para uso en madera contrachapada, paneles y tableros de cercas - Diseño ligero y compacto para mayor comodidad y control El accesorio de sierra para recortar Matrix BDCMTTS de BLACK+DECKER tiene un diseño liviano y compacto para mayor comodidad y control. Su botón de bloqueo del husillo permite cambios de broca con una sola llave. Este accesorio de sierra para recortar se puede utilizar con cualquier herramienta de la línea Matrix de Black and Decker, incluidas la BDEDMT y la BDCDMT112... -
Precio: $475,049.00
Disco Sierra CHAMPION 10 80T (RZR 10 80 NF) Corte de alumi
-Titulo Original : Champion Cutting Tool Corp Circular Saw Blade 10, 80t (rzr-10-80-nf)-cut Aluminum-Fabricante : Champion Cutting Tool Corp-Descripcion Original: New, high performance RZR Carbide tipped circular saw blades are ideal for cutting aluminum and other non-ferrous materials // Feature ultra- sharp titanium carbide teeth for smooth, bur-free cutting // Laser slits reduce vibration and noise for smooth, stable cutting // Ideal for cutting aluminum plate, extrusion, angle, tubing and other non-ferrous materials // Max thickness of cut= 3/8".Please note that when cutting pipe or tubing, "max thickness of cut" refers to wall thickness, not overall diam. // Size: Champion Brute Platinum RZR Carbide Circular Saw Blades are specifically engineered for cutting aluminum and other non-ferrous materials. Tungsten Carbide is the preferred cutting material for aluminum and non-ferrous metals for smooth, bur-free cuts. High performance, industrial quality blades allow operators to experience frustration free cutting and increased prodcutivity on the job. Please note that when cutting pipe or tubing, max thickness of cut refers to wall thickness, not overall circumference. Power Tool Guidelines: (5-3/8 use in metal cutting cordless saw), (7, 7-1/4, 8, and 9 use in metal cutting circular saws), (12, 14 use in slow-speed, cold cut chop saws)... -
Precio: $166,989.00
Disco Sierra Diablo por Freud D0649F Ø172 48D E20 Metales
-Titulo Original : Freud Diablo D0649F 6-3/4-Inch 48-Tooth Steel Demon TCG Ferrous Cutting Circular Saw Blade with 21-mm Arbor-Fabricante : Diablo-Descripcion Original: Efficiently cut through ferrous metals quickly and accurately, leaving clean, burr free cuts // Ideal for cutting steel studs, steel pipe, and steel sheet // Ideal for most mild steels under 1/8 in. Thickness // Product Description Diablo's premium steel Demon 6-3/4 in. X 48 tooth 20mm Arbor carbide ferrous metal saw blade has teeth made of ti-co high Density carbide with titanium for a design that withstands impact, reduces wear, and lasts longer that standard carbide in metal cutting applications. Tri-metal shock resistant brazing allows metal cutting carbide tips to withstand extreme impact for maximum durability. Non-stick Perma-Shield coating protects the blade from heat and corrosion, reduces friction and Pitch buildup. Laser-cut Stabilizer vents absorb noise and reduce vibration for a cleaner cut and longer life. From the Manufacturer The Diablo Steel Demon is ideal for cutting steel studs, steel pipe, and steel sheet and is perfect for most mild steels under 1/8-inch. The triple-chip design ensures a longer cutting life in metal, while the Perma-Shield coating shields the blade against heat, gumming, and corrosion. Laser-cut stabilizer vents trap noise and vibration and stabilize blade and the laser-cut heat expansion slots reduce heat and blade warp. Tri-metal shock-resistant brazing give this blade stronger carbide teeth. The Steel Demon features Freud's TiCo high-density carbide which cuts up to 40x longer than abrasive discs. Specs: 6-3/4-inch diameter, 48-tooth TCG, 21-mm arbor...