Arriba

Herramientas > Accesorios para Herramientas > Discos de Corte

Mostrar: 
Mostrar del 1 al 24 (de 901 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Disco Sierra FREUD LU1I06 300 mm de carburo de 96T con bor
    Precio:  $39,779.00

    Disco Sierra FREUD LU1I06 300 mm de carburo de 96T con bor

    -Titulo Original : Freud Lu1i06 300mm 96 Tooth Carbide Tipped Blade To Cut Solid Wood Frames In Crosscutting-Fabricante : Freud-Descripcion Original: 30mm arbor and 20 ATB tooth with positive hook angle // For softwoods and hardwoods // 300mm 96 tooth blade // Style: Carbide-tipped blade to cut solid wood frames in crosscutting. for no splintering of frames and end trims of previously profiled items, where the iems have to be coupled to perfectly match, even if they are covered with paint, chalk and other abrasive and fine materials...
  • Disco Sierra HUSQVARNA 542756136 XL10 6000 Excel 6000 Seri
    Precio:  $56,169.00

    Disco Sierra HUSQVARNA 542756136 XL10 6000 Excel 6000 Seri

    -Titulo Original : Husqvarna 542756136 Xl10-6000 Excel 6000 Series Blade & Skidplate, Black-Fabricante : Husqvarna-Descripcion Original: 10 x .10 inch Excel 6000 Series Black Blade and Skid plate // Ultra early entry saw blades // For soft aggregate, abrasive sand // For saw model 2000/2500 from Husqvarna // Skid plate is included with the blade // Husqvarna 542756136 XL10-6000 10 x .10 inch Excel 6000 Series Black Blade and Skid plate is an ultra early entry saw blades. For soft aggregate, abrasive sand. Skid plate is included with the blade. For saw model 2000/2500 from Husqvarna...
  • Disco de Diamante HITACHI 728737 de borde continuo de corte en húmedo y seco de 4-1/2 pulg. para losetas y piedra
    Precio:  $10,139.00

    Disco de Diamante HITACHI 728737 de borde continuo de corte en húmedo y seco de 4-1/2 pulg. para losetas y piedra

    -Titulo Original : Hitachi 728737 4-1/2-Inch Wet and Dry Cut Continuous Rim Diamond Saw Blade for Tile and Stone-Fabricante : HITACHI-Descripcion Original: Cuts granite, brick, tile and concrete // Diamond bearing edge // Steel core for low vibrations // Ultra thin kerf // Comes with a 30-day limited warranty // Product Description Hitachi 728737 4-1/2-Inch Continuous Rim Diamond Saw Blade for Tile and Stone, Wet and Dry Cut From the Manufacturer The Hitachi 728737 4-1/2-Inch Continuous Rim Diamond Saw Blade for Tile and Stone withstands days of repeated use and outlasts traditional blades (of equal or greater value). Diamond bearings give the Hitachi 728737 a sharper, longer lasting edge that blasts through concrete slabs and granite countertops. This blade is perfect for patio and stonecutting projects and the thin kerf delivers rapid cuts with minimal exertion. Diamond is the toughest material on earth and retains its form longer than carbide or corundum. The diamond bearings provide higher cutting efficiency with lower force, a longer blade lifespan and lower comprehensive costs. This blade is sharper and stronger than carbide and corundum tipped blades. For best results and extended (overall) life, apply light pressure while using. The Hitachi 728737 4-1/2-Inch Continuous Rim Diamond Saw Blade for Tile and Stone is warranted to the original purchaser to be free from defects in materials and workmanship for a period of 30-days from the original purchase date. Every Hitachi accessory is designed to the highest standards and is rigorously tested for both performance and durability. Since its inception, Hitachi has pioneered innovative technologies that have improved the quality of craftsmanship worldwide. Hitachi is a leader in power tool research and development and has achieved many firsts in the power tool industry. Today, Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality...
  • Disco Sierra CHAMPION RZR 12100 NF 12 100T Corte Alumbre
    Precio:  $29,039.00

    Disco Sierra CHAMPION RZR 12100 NF 12 100T Corte Alumbre

    -Titulo Original : Champion Cutting Tool Rzr-12-100-nf 12 100t-cut Alum Circular Saw Blade-Fabricante : Champion Cutting Tool Corp-Descripcion Original: New, high performance RZR Carbide tipped circular saw blades are ideal for cutting aluminum and other non-ferrous materials // Feature ultra-sharp titanium Carbide teeth for smooth, Bur-Free cutting // Laser slits reduce vibration and noise for smooth, stable cutting // Ideal for cutting aluminum plate, extrusion, angle, tubing and other non-ferrous materials // Max thickness of cut= 3/8". please note that when cutting pipe or tubing, "max thickness of cut" refers to wall thickness, not overall diameter // Size: Champion Brute Platinum RZR Carbide Circular Saw Blades are specifically engineered for cutting aluminum and other non-ferrous materials. Tungsten Carbide is the preferred cutting material for aluminum and non-ferrous metals for smooth, bur-free cuts. High performance, industrial quality blades allow operators to experience frustration free cutting and increased productivity on the job. Please note that when cutting pipe or tubing, max thickness of cut: refers to wall thickness, not overall circumference. Power Tool Guideline: (5-3/8 use in metal cutting cordless saw), (7, 7-1/4, 8, and 9 use in metal cutting circular saws), (12, 14 us in slow-speed, cold cut shop saws)...
  • Disco Sierra FREUD Laminado / Melamina de una cara de 14 x
    Precio:  $32,519.00

    Disco Sierra FREUD Laminado / Melamina de una cara de 14 x

    -Titulo Original : Freud 14 X 108t Single Sided Laminate/melamine Blade (lu98r014)-Fabricante : Freud-Descripcion Original: Premium TiCo HI-Density Carbide Laminate Blend for Maximum Performance // Triple Chip Grind (TCG) Tooth Design with a positive hook angle for long life in production applications // Positive Hook Angles for fast cutting and easy feed // Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up. // Style: Product Description This fast-cutting blade is ideal for a perfect finish on one side of laminates and melamines. The Perma-SHIELD™ coating makes these blades resistant to friction and heat build-up. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. The 5° hook angle and a triple chip grind provide fast cuts and long cutting life 14 Blade Diameter, 1 Arbor, 108 TCG Teeth, TCG Grind, .138 Kerf (K), 7° Hook Angle, .098 Plate (P) Ideal For: Single-Sided Laminates, Chip Board And Other Man-made Materials. Depth of cut (1/2 min to 2-3/4 max). Application: Laminates and melamines. Made In Italy. Amazon.com Designed for speed, the 14-inch Freud LU98R014 Single-Sided Laminate and Melamine Cutting Saw Blade leaves a flawless finish on one side when working with laminates, melamine, and veneered plywood. It features Freud's Perma-SHIELD coating, and a triple-chip tooth grind, the long-term dependability of TiCo high-density carbide, and a series of laser-cut, anti-vibration slots. This fast-cutting blade is built to leave a perfect, chip-free finish on one side when cutting laminates and sheets of melamine. Ideal for large-volume production work, this blade features 108 teeth with a triple chip grind. The blade's teeth also feature 10-degree, positive hook angles, which contribute to the blade's speed and extended tooth life.This blade is designed for optimal performance when cutting laminate or melamine that ranges from 1/4 to 1-5/8 inches in thickness. It's also an excellent performer when working with plywood and chipboard, and a solid performer when crosscutting wood. This blade can also rip wood, and it can tackle thinner or thicker materials. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 1-inch arbor and produces a 0.138 kerf. This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use. Furthermore, this well-balanced, anti-vibration design means there's no need to use add-on stabilizers with this blade. This laminate saw blade's 108 teeth are finished with tips made from Freud's application-specific TiCo high-density carbide laminate blend. Formulated to extend tooth life in the face of work with laminates, melamine, and solid surfaces, this blend is extra hard--due to the proportion of high-density tungsten carbide that goes into it--and it still offers the mix of improved corrosion resistance, heat resistance, and impact resistance that you expect from TiCo.With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer--saving you time and money. Built to withstand tough use in less-than-ideal conditions, this blade is finished with Freud's red Perma-SHIELD--a non-stick coating that reduces friction and nearly eliminates the heat buildup that excess friction can cause. By providing complete thermal insulation, this coating protects your tools and your work surface. And it resists binding when the blade is used for large-volume cutting applications, which reduces blade warp.As a lubricating feature, Perma-SHIELD allows the blade to spin freely while reducing stress on the motor and carriage of your saw. In addition, this coating helps prevent debris collection and resin or pitch buildup. Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup is another little convenience that translates into longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.This industrial saw blade is backed by Freud's limited lifetime warranty. An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a High-Density combination of Titanium and Cobalt.By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more. Freud LU98R014 Single-Sided Laminate and Melamine Cutting Saw Blade with Perma-SHIELD--14-inch diameter, 1-inch arbor, 108-tooth design. See all Product descriptio...
  • Disco Sierra Diablo Por Freud D0760 Ø184 60d E16 U. Acabado
    Precio:  $5,679.00

    Disco Sierra Diablo Por Freud D0760 Ø184 60d E16 U. Acabado

    -Titulo Original : Freud D0760X Diablo Ultra Finish Saw Blade ATB 7-1/4-Inch by 60t 5/8-Inch Arbor-Fabricante : Diablo-Descripcion Original: Ultra thin kerf for fast, easy cutting and minimum waste // Anti vibration Technology reduces noise and extends cutting life and Laser Cut steel blade body for smoother cuts and flatness // Perma-Shield Non-Stick Coating reduces friction, heat build up which adds to longer blade life // Features Freud's Exclusive TiCo Hi-Density Carbide designed specifically for crosscutting applications // Ultra thin kerf for fast, easy cutting and minimum waste // Anti vibration Technology reduces noise and extends cutting life and Laser Cut steel blade body for smoother cuts and flatness // Perma-Shield Non-Stick Coating reduces friction, heat build up which adds to longer blade life // Freud's Limited Lifetime Guarantee // Item Package Quantity: Product Description Ultra thin kerf for fast, easy cutting and minimum waste; Anti vibration Technology reduces noise and extends cutting life and Laser Cut steel blade body for smoother cuts and flatness; Perma-Shield Non-Stick Coating reduces friction, heat build up which adds to longer blade life Amazon.com For a blade dedicated to cutting ultra-fine finish work with remarkably clean, chip-free results, look no further than the Freud D0760X Diablo 7.25-Inch Ultra-Fine-Finish Saw Blade. Ideal for fine cabinetmaking, this is your go-to blade for slicing through oak, pine, melamine, veneer plywood, and delicate molding. For strong, long-lasting resistance, the blades feature a tough steel plate and high-density carbide tips. Model #D0760XDiameter7-1/4Machine UseCircular SawApplicationUltra Fine-FinishTeeth60 ATBArbor5/8 (Diamond knockout arbor)Kerf.059Hook Angle10° Achieving premium results when creating finish crosscuts in ultra-fine materials is all about clean, accurate cuts. The Freud D0760X makes this process easy, fast, and precise. To save you time, most cuts made by this blade require little to no sanding.Trim carpenters, fine cabinetmakers, and avid do-it-yourselfers will want to keep this blade on hand for those special jobs that call for making ultra-fine finish crosscuts in delicate pieces. Appropriate application materials include oak, pine, melamine, veneer plywood, and delicate molding. The Freud D0760X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.59-inch kerf between the blade's 60 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life. So you can count on it over the long term, the Freud D0760X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion. The Freud D0760X is a great addition to your workshop because it's designed with the versatility to fit a variety of circular saws.This product is covered by Freud's Limited Lifetime Warranty. Freud D0760X Diablo 7.25-Inch Ultra-Fine-Finish Saw Blade. See all Product descriptio...
  • Disco Sierra FREUD LM0810 225mm 28 AtbT Design Carbide Tip
    Precio:  $4,339.00

    Disco Sierra FREUD LM0810 225mm 28 AtbT Design Carbide Tip

    -Titulo Original : Freud Lm0810 225mm 28 Atb Tooth Design Carbide Tipped Ultra-thin Kerf Blade For Ripping-Fabricante : Freud-Descripcion Original: 40mm arbor plus flat tooth (p) or 15 ATB tooth design // For high-quality softwoods and hardwoods dried at 10 percent max humidity rate // 225mm 28 ATB tooth design // Style: 225 mm x 36T gang rip (thin kerf...
  • Disco Sierra FREUD D0756NA Aluminio 7 1/4 In. x 56T Cantid
    Precio:  $38,729.00

    Disco Sierra FREUD D0756NA Aluminio 7 1/4 In. x 56T Cantid

    -Titulo Original : Freud D0756NA Circular Saw Blade, Aluminum, 7-1/4-In. x 56T - Quantity 5-Fabricante : FREUD-Descripcion Original: Diablo, 7-1/4 x 56 Tooth , 5/8 Arbor, Aluminum, Circular Saw Blade, Super Thin Laser Cut Kerf Small Diameter Blades Only Provides Faster, Cleaner, More Exacting Cuts, Perma-Shield Coating Shields Blade Against Heat, Gumming and Corrosion, Durable Micro Grain Titanium Carbide Tipped Teeth Are Impact Resistant To Hold Their Edge Longer, Laser Cut Stabilizer Vents Trap Noise and Vibration and Stabilize Blade, Laser Cut Heat Expansion Slots Reduce Heat and Blade Warp, Tri-Metal Shock-Resistant Brazing For Stronger Carbide Teeth, Bulk...
  • Disco De Diamante Bosch Db1241 Premium Plus Segmentado De Corte En Humedo De 12 Pulg. Con Eje De 1 Pulgada Para Mamposte
    Precio:  $19,109.00

    Disco De Diamante Bosch Db1241 Premium Plus Segmentado De Corte En Humedo De 12 Pulg. Con Eje De 1 Pulgada Para Mamposte

    -Titulo Original : Bosch DB1241 Premium Plus 12-Inch Wet Cutting Segmented Diamond Saw Blade with 1-Inch Arbor for Masonry-Fabricante : BOSCH-Descripcion Original: Bosch Laser Weld Technology // Bosch Laser Weld Advantage // Color Coded Application // Top Quality Diamonds // 20% Faster Cutting than Standard Blades // Product description The Bosch 12 in. General-Purpose Premium Circular Saw Blade is a great choice for cutting hard materials such as stone, steel and tile. The blade has a 1 in. arbor. Bosch high performance diamond Blades are designed to cut faster and last longer. Laser weld technology creates exceptional bonding and deep diamond distribution resulting in longer blade life and 20% faster cutting. The advantage of the single step laser weld is less heat stress during manufacturing which forges a stronger blade. From the Manufacturer Bosch high performance diamond Blades are designed to cut faster and last longer. Laser weld technology creates exceptional bonding and deep diamond distribution resulting in longer blade life and 20% faster cutting. The advantage of the single step laser weld is less heat stress during manufacturing which forges a stronger blade...
  • Disco Sierra DEWALT DWAFV0218 FLEXVOLT Agujero de madera d
    Precio:  $4,009.00

    Disco Sierra DEWALT DWAFV0218 FLEXVOLT Agujero de madera d

    -Titulo Original : Dewalt Dwafv0218 Flexvolt Carbide Wood Hole Saw Blade, 2-1/8-Fabricante : Dewalt-Descripcion Original: Carbide Teeth for long life // Thin Kerf Design for high efficiency // DEWALT FLEXVOLT High Efficiency Accessories are engineered to maximize runtime // Size: The DEWALT DWAFV0218 FLEXVOLT 2-1/8 inch Carbide Wood Hole Saw Blades are engineered to maximize runtime. It offers carbide teeth for long life, and a thin kerf design for high efficiency. For use in cordless and corded tools. DEWALT FLEXVOLT high efficiency accessories are engineered to maximize runtime. Includes (1) Wood Hole Saw Blade...
  • Disco Sierra FREUD Laminado / melamina de una cara de 12 x
    Precio:  $28,269.00

    Disco Sierra FREUD Laminado / melamina de una cara de 12 x

    -Titulo Original : Freud 12 X 96t Single Sided Laminate/melamine Blade (lu98r012)-Fabricante : Freud-Descripcion Original: Premium TiCo HI-Density Carbide Laminate Blend for Maximum Performance // Triple Chip Grind (TCG) Tooth Design with a positive hook angle for long life in production applications // Positive Hook Angles for fast cutting and easy feed // Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up. // Style: Product Description This fast-cutting blade is ideal for a perfect finish on one side of laminates and melamines. The Perma-SHIELD™ coating makes these blades resistant to friction and heat build-up. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. The 5° hook angle and a triple chip grind provide fast cuts and long cutting life 12 Blade Diameter, 1 Arbor, 96 TCG Teeth, TCG Grind, .126 Kerf (K), 5° Hook Angle, .087 Plate (P) Ideal For: Single-Sided Laminates, Chip Board And Other Man-made Materials. Depth of cut (1/2 min to 2-3/4 max). Application: Laminates and melamines. Made In Italy. Amazon.com Designed for speed, the 12-inch Freud LU98R012 Single-Sided Laminate and Melamine Cutting Saw Blade leaves a flawless finish on one side when working with laminates, melamine, and veneered plywood. It features Freud's Perma-SHIELD coating, and a triple-chip tooth grind, the long-term dependability of TiCo high-density carbide, and a series of laser-cut, anti-vibration slots. Ideal for single-sided laminates, melamine, and veneered plywood from 1/4 to 1-5/8 inches thickHeavy-duty plate with laser-cut, anti-vibration slotsTough Perma-SHIELD coating reduces friction and heat buildupCoatingPerma-SHIELDDiameter12Teeth96 TCGArbor1Hook Angle5°Kerf (K).126Plate (P).087 with a negative hook angle for superior life in abrasive man-made materials for fast cutting and easy feed This fast-cutting blade is built to leave a perfect, chip-free finish on one side when cutting laminates and sheets of melamine. Ideal for large-volume production work, this blade features 96 teeth with a triple-chip grind. The blade's teeth also feature 10-degree, positive hook angles, which contribute to the blade's speed and extended tooth life.This blade is designed for optimal performance when cutting laminate or melamine that ranges from 1/4 to 1-5/8 inches in thickness. It's also an excellent performer when working with plywood and chipboard, and a solid performer when crosscutting wood. This blade can also rip wood, and it can tackle thinner or thicker materials. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 1-inch arbor and produces a 0.126 kerf. This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use. Furthermore, this well-balanced, anti-vibration design means there's no need to use add-on stabilizers with this blade. This laminate saw blade's 96 teeth are finished with tips made from Freud's application-specific TiCo high-density carbide laminate blend. Formulated to extend tooth life in the face of work with laminates, melamine, and solid surfaces, this blend is extra hard--due to the proportion of high-density tungsten carbide that goes into it--and it still offers the mix of improved corrosion resistance, heat resistance, and impact resistance that you expect from TiCo.With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer--saving you time and money. Built to withstand tough use in less-than-ideal conditions, this blade is finished with Freud's red Perma-SHIELD--a non-stick coating that reduces friction and nearly eliminates the heat buildup that excess friction can cause. By providing complete thermal insulation, this coating protects your tools and your work surface. And it resists binding when the blade is used for large-volume cutting applications, which reduces blade warp.As a lubricating feature, Perma-SHIELD allows the blade to spin freely while reducing stress on the motor and carriage of your saw. In addition, this coating helps prevent debris collection and resin or pitch buildup. Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup is another little convenience that translates into longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.This industrial saw blade is backed by Freud's limited lifetime warranty. An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more. Freud LU98R012 Single-Sided Laminate and Melamine Cutting Saw Blade with Perma-SHIELD--12-inch diameter, 1-inch arbor, 96-tooth design. See all Product descriptio...
  • Disco de Diamante CONCORD TEPM045A03SP de mármol galvanizado de 4 5 pulg.
    Precio:  $2,699.00

    Disco de Diamante CONCORD TEPM045A03SP de mármol galvanizado de 4 5 pulg.

    -Titulo Original : Concord Blades TEPM045A03SP 4.5 Inch Electroplated Marble Diamond Blade-Fabricante : CONCORD BLADES-Descripcion Original: 7/8" 20mm -5/8" Arbor 3mm Segment Height // Use Dry/Wet // Super Fast Cut with Minimum Chipping, even on dry cut // Use on Angle Grinder, Wet Stone Saw or Circular Saw // Used for cutting Marble // Size: 4.5 Inch Electroplated Marble Diamond Blade is of professional quality and designed for very fast cutting of Marble. The Electroplating Technology keeps all diamond particles attached to the segment plate and core, without such assisting aggregates such as copper and steel, making this a chip-free cutting blade. Exposed diamond particles allow this blade to have a 100% surface to surface contact. The diamonds on the core provide a clean all through cut. This is an economic alternative to impregnated segmented blades...
  • Disco Sierra Evolution Corte de acero inox. 185SS 7 1/4 p.
    Precio:  $9,039.00

    Disco Sierra Evolution Corte de acero inox. 185SS 7 1/4 p.

    -Titulo Original : Evolution Power Tools 185BLADESS Stainless Steel Cutting Saw Blade, 7-1/4-Inch x 48-Tooth-Fabricante : EVOLUTION POWER TOOLS-Descripcion Original: Max RPM 3900 // 48 Carbide Teeth, .070-Inch Kerf // 20mm Arbor Size..-Note: Designed for use with Evolution saws or other low RPM saws. // Size:  |  Style: Designed for cutting stainless steel, Evolution metal cutting blades use dry cut technology, cutting with very little heat and few burrs...
  • Disco Sierra BOSCH DCB740 7 1/4 pulg. Acabado portátil Dar
    Precio:  $3,829.00

    Disco Sierra BOSCH DCB740 7 1/4 pulg. Acabado portátil Dar

    -Titulo Original : Bosch Dcb740 7-1/4 In. 40 Tooth Daredevil Portable Saw Blade Finishing-Fabricante : Bosch-Descripcion Original: Triple-sharp teeth for fast, clean cuts // Premium Bosch C3 carbide starts sharp and stays sharp // Thin kerf with extra-hard plate for less waste and increased accuracy // Speed Coat finish reduces friction and heat // 5/8 In. arbor with diamond knockout // Size: Product Description 40 teeth for a fine finish and long life in standard or worm drive saws. High tooth count provides excellent finish in wood, plywood and other construction materials. Bosch C3 carbide tips stay sharper longer and resist damage from nails and staples. Fits most saw brands and models, including worm drive. Ideal for finish work in remodeling and general construction. Amazon.com The DareDevil line of tool accessories by Bosch combines creativity with unsurpassable boldness to deliver a selection of top performing reciprocating saw blades, circular saw blades, auger bits, and spade bits. Inspired by the Godfather of Freestyle Motocross, Mike Metzger, every DareDevil accessory is built to “Work Hard, Play Hard” at every extreme. Every DareDevil accessory must be the best-in-class in at least one of the following features: speed, cutting ability, or ease-of-use. Experience a bold, daring, and captivating performance now on your jobsite. The cutting speed and durability of DareDevil reciprocating blades is top-of-the-line. With patented two-by-two tooth geometry, these blades have the ability to cut up to 20-percent faster through metal. They also have a variable tooth pitch of 5/8 teeth-per-inch, increasing the speed of chip removal while making smoother, more precise cuts. The teeth have also have a micro-blast treatment applied to them that preserves the sharpness of the blade and furthers the precision of the cutting edge. To increase durability, these blades have a powder metal steel alloy to resist higher temperatures as well as a titanium coating to reduce heat build-up. In addition, the body height and thickness of these blades have been increased to ensure straighter cuts with reduced vibration. These reciprocating blades are available in a wide selection of sizes and packs, making them perfect for the contractor, professional, or heavy duty do-it-yourselfer. Bosch's DareDevil spade bits have drilling speed and force that sets them in a performance class of their own. Designed with a patented full cone threaded tip, drilling becomes fast and effortless for these bits. Also unique to these bits is the spur and reamer feature that allows for drilling of cleaner holes. In addition to these features, the contoured paddle design is what really sets these spade bits apart from the rest of the market. This design allows for chip removal to be reached at higher speeds than ever. With chipping speeds this high, DareDevil has added a hex shank power groove at the end of the bit to further reduce slippage during use. These spade bits are available in a wide selection of sizes and packs, making them perfect for the contractor, professional, or heavy duty do-it-yourselfer. Nail killing auger bits are signature to DareDevil in their best-of-class nail-hitting ability and user ease. Built with dual cutting edges and a reinforced tip, these auger bits balance easier nail cutting and accurate drilling with the power to withstand repeated nail hits. To ensure the quality and accuracy of both entry and exit holes, these auger bits have been built with a reamer edge. To improve chip removal, these bits have an open-faced flute design. They also have a reinforced spine for that crucial extra strenght needed when performing heavy-duty application. All of these features combine to decrease the torque impact on nail hits by up to 61-percent while increasing the life of nails up to 9-times. These auger bits are available in a wide selection of sizes and packs, making them perfect for the contractor, professional, or heavy duty do-it-yourselfer. All DareDevil accessories are backed by a one-year limited warranty. In the instance of manufacturer defects, the item will be backed for one full year by the warranty. Damages caused by use of the product are not covered under the warranty...
  • Disco Sierra AMANA General 10 x 40T Atb 5/8 eje (MD10 400)
    Precio:  $12,269.00

    Disco Sierra AMANA General 10 x 40T Atb 5/8 eje (MD10 400)

    -Titulo Original : A.g.e. Series - General 10 X 40t Atb 5/8 Bore (md10-400)-Fabricante : A.g.e. Series By Amana Tool-Descripcion Original: European Style Carbide Tips // Laser Cut Expansion Slots // Precision, Heavy-Duty // Precision Ground // Made in Germany // Product Description The A. G. E. Series is an exciting line of budget-priced, industrial-quality circular saw blades for cabinet shops, professional woodworkers and discerning hobbyists. These blades are doing so well that we have expanded the line. Manufactured in Germany, to Amana Tool exacting specifications, these new blades deliver excellent performance at remarkably low price. From the Manufacturer TheA.G.E Series is an exciting line of budget-priced, industrial-quality circular saw blades for cabinet shops, professional woodworkers and discerning hobbyists. These blades are doing so well that we have expanded the line. Manufactured in Germany, to Amana Toolexacting specifications, these new blades deliver excellent performance at remarkably low prices. A.G.E.™ Series blades are laser cut from virgin steel, then flattened, ground, tensioned and tipped with large, European-style carbide tips for smooth, accurate cutting. Every step of the manufacturing process is computer-controlled and monitored by sophisticated inspection equipment to assure consistently “tight” tolerances and superior quality. Each blade is inspected again prior to shipment, so when you buyA.G.E Series blades, you can count on excellent performance and outstanding value. • Carbide Tipped • ATB (Alternate Top Bevel) • Crosscuts wood up to 3-1/2 thick • Rips wood up to 1 thick This is a general purpose blade which provides good results ripping and crosscutting in a variety of materials...
  • Disco de Diamante MAKITA A-96403 antivibración Turbo de 8 segmentos 4-1/2 pulg.
    Precio:  $13,269.00

    Disco de Diamante MAKITA A-96403 antivibración Turbo de 8 segmentos 4-1/2 pulg.

    -Titulo Original : Makita A-96403 Anti-Vibration Diamond Cup Wheel, 8 Segment Turbo, 4-1/2-Fabricante : MAKITA-Descripcion Original: Anti-vibration design engineered to keep the wheel planted firmly on the surface for more efficient material removal // Double row design for a smoother finish than single row wheels // Innovative design reduces chattering for an improved operator experience // Use with Makita Dust Extracting Surfacing Shroud for a cleaner work environment // Hubbed design for quick wheel changes; 5/8"-11 arbor // Style:  |  Size: The Makita A-96403 4-1/2 Anti-Vibration Diamond Cup Wheel has an Anti-Vibration Design for Improved Performance and Added Operator Comfort...
  • Disco Sierra OSHLUN SBNF 072540 7 1/4 x 40T TCG con eje 5
    Precio:  $5,619.00

    Disco Sierra OSHLUN SBNF 072540 7 1/4 x 40T TCG con eje 5

    -Titulo Original : Oshlun Sbnf-072540 7-1/4-inch 40 Tooth Tcg Saw Blade With 5/8-inch Arbor (diamond Knockout) For Aluminum And Non Ferrous Metals-Fabricante : Oshlun-Descripcion Original: Professional Grade C-1 Carbide // Negative Hook Angle // Triple Chip Tooth Grind // Precision Ground Carbide Tips // Heat Vents for Cooler Operation // Size: Our non ferrous metal blades have been designed with precision ground micro grain tungsten carbide tips and a triple chip tooth configuration. The specially formulated carbide lasts longer and leaves clean, burr free cuts in all types of non ferrous metals such as aluminum, copper, brass, bronze and even some plastics. Features heat vents for cooler operation. WARNING: Never attempt to cut ferrous metals with these blades. It is recommended that you use a coolant when cutting non ferrous metals. Proper clamping devices should be employed...
  • Disco Sierra AMANA Eje no ferroso 7 X 58T 5/8 (MD7 585)
    Precio:  $16,829.00

    Disco Sierra AMANA Eje no ferroso 7 X 58T 5/8 (MD7 585)

    -Titulo Original : A.g.e. Series - Non-ferrous 7 X 58t 5/8 Bore (md7-585)-Fabricante : A.g.e. Series-Descripcion Original: European Style Carbide Tips // Laser Cut Expansion Slots // Precision, Heavy-Duty // Precision Ground // Made in Germany // The A. G. E. Series is an exciting line of budget-priced, industrial-quality circular saw blades for cabinet shops, professional woodworkers and discerning hobbyists. These blades are doing so well that we have expanded the line. Manufactured in Germany, to Amana Tool exacting specifications, these new blades deliver excellent performance at remarkably low price...
  • Disco de Diamante SHDIATOOL pulido de corte de 5 pulg. Se adapta a 5/8-11 Cenador para mármol Cerámica Cerámica de doble
    Precio:  $6,409.00

    Disco de Diamante SHDIATOOL pulido de corte de 5 pulg. Se adapta a 5/8-11 Cenador para mármol Cerámica Cerámica de doble

    -Titulo Original : SHDIATOOL 5 Inch Diamond Cutting Grinding Disc Fits 5/8-11 Arbor for Marble Ceramic Double Sided Vacuum Brazed Fast Cutting Shaping Grinding Wheel-Fabricante : SHDIATOOL-Descripcion Original: 1 pc Premium Quality Double Sided Vacuum Brazed Diamond Cutting & Grinding Disc with 5/8-11 Flange // Diameter 5"/125mm, 5/8-11 Flange, Thickness 2.4-2.5MM, Diamond Grit #40/50. // Multi-purpose and aggressive for fast cutting, shaping and grinding stone marble granite concrete // Widely used for profiling edges, smoothing out inside sinkhole cuts, and smoothing // Very good for removing deep scratches from stone, prior polishing // Size: ========== DESCRIPTION ========== Item: 1pc Premium Quality Double Sided Vacuum Brazed Diamond Cutting & Grinding Disc With 5/8-11 Flange Quantity: 1pc (5/125mm) Specification: Diameter 5/125MM, 5/8-11 Flange, Thickness 2.4-2.5MM, Diamond Grit #40/50 Application: Multi-purpose and aggressive for fast cutting, shaping and grinding stone Widely used for profiling edges, smoothing out inside sinkhole cuts, and smoothing Rough surfaces for lamination. Very good for removing deep scratches from stone, prior polishing Also widely used for removing coating on concrete floors Concrete countertop fabricator use these discs to efficiently expose aggregates Feature: Special Design with eight flange holes, the flange can be installed on both side, both side can be used efficient, lower cost. One Disc for multipurpose High diamond exposure rate provides a faster and more aggressive cutting and Grinding. Vacuum Brazed Diamond tools working much longer than Electroplated Diamond tools Engineered for good balance, fast grinding,cutting and long working life. Best choice for people who do granite and marble worktops, headstones, tilers,builders... ================THE END================ Remark: Other available diameter 4/100mm, 4.5/115mm, 5/125m...
  • 2 Hojas de Sierra DIABLO Combinación D1050X 10 x 50T ATB con
    Precio:  $17,419.00

    2 Hojas de Sierra DIABLO Combinación D1050X 10 x 50T ATB con

    -Titulo Original : Freud D1050x Diablo 10-inch 50-tooth Atb Combination Saw Blade With 5/8-inch Arbor And Permashield Coating (2 Pack Basic)-Fabricante : Diablo-Descripcion Original: Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp // The product is 10x50T Diablo Blade // Size: Diablo Combination Blade, 10 x 50 ATB, 5/8 Arbor, .098 Kerf, .071 Plate, Hook Angle 15*, Perma Shield Freud Diablo Combination Blad...
  • Disco Sierra LENOX Corte de acero 10i 52T (21886ST100052CT
    Precio:  $20,429.00

    Disco Sierra LENOX Corte de acero 10i 52T (21886ST100052CT

    -Titulo Original : Lenox Tools 10-inch Circular Saw Blade, Steel-cutting, 52-tooth (21886st100052ct)-Fabricante : Lenox Tools-Descripcion Original: The product is 10x52 STL Circle Blade // Easy to use // The product is manufactured in China // Titanium Carbide Tipped resists material build up // Less burring than Abrasive cutting // Reduced Material Burning // Triple Chip Grind for added durability // Resharpenable // Size:  |  Style: Product Description The product is 10x52 STL Circle Blade. Easy to use. The product is manufactured in China. From the Manufacturer The Lenox Tools 21886ST100052CT Metal Cutting Circular Saw Blade 10-Inch by 52 Teeth Steel is a faster way to cut metal. The Blade is titanium carbide tipped which resists material build up. The Blade also provides less burring than abrasive blades, which eliminates the need for secondary grinding and reduces material burning...
  • 8 Hojas de Sierra DIABLO D0436X 4 3/8 x 36T ATB 20 Eje milim
    Precio:  $21,799.00

    8 Hojas de Sierra DIABLO D0436X 4 3/8 x 36T ATB 20 Eje milim

    -Titulo Original : Freud D0436x Diablo 4-3/8-inch 36 Tooth Atb Saw Blade 20-millimeter Arbor & 3/8-inch Reducer Bushing (8 Pack)-Fabricante : Freud-Descripcion Original: 4 3/8" x 36-tooth durable cordless trim saw blade | ATB finish blade for wood | Includes a 20mm arbor with 3/8" bushing // Red Perma-Shield blade coating to resist heat and reduce gumming, rusting and corrosion | This carbide tipped saw blade is the perfect replacement blade for many popular trim saws // Perfect choice for excellent rips and crosscuts using a portable saw | Laser-cut stabilizer vents trap noise and vibration - Keeps blade cool and reduces blade warp // Freud micrograin carbide for long life | Anti-vibration vents for stability // Super thin laser cut kerf gives extremely fast, durable, and clean cuts // Diablo's 4-3/8 inch 36 tooth cordless trim saw blade includes a 20mm Arbor with 3/8 inch Bushing. Diablo's finish blades are the perfect choice for excellent rips and crosscuts using a portable saw while the super thin kerf helps extend the battery life on the saw. 4 3/8 x 36t Cordless Trim Saw Blade ATB Finish blade for wood 20mm arbor w/ 3/8 bushing Red Perma-Shield blade This carbide tipped saw blade is the perfect replacement blade for many popular trim saws Durable product This product meets the customer requirements Manufactured in Italy Laser cut bodies for accurate cuts Freud micrograin carbide for long life Anti-vibration vents for stability Perma-shield coating to resist heat Thin kerf design to increase machine performance Freud D0436X Diablo 4-3/8-Inch 36 Tooth ATB Cordless Trim Saw Blade (8-Pack...
  • Disco Sierra FREUD LU5B02 Carburo 80T 80mm con borde para
    Precio:  $34,629.00

    Disco Sierra FREUD LU5B02 Carburo 80T 80mm con borde para

    -Titulo Original : Freud Lu5b02 250mm 80 Tooth Carbide Tipped Blade For Cutting Aluminum, Non-ferrous Metals And Polymeric Materials-Fabricante : Freud-Descripcion Original: 30mm arbor and flat triple chip tooth design with positive hook angle // For cutting aluminum, non-ferrous metals and polymeric materials // 250mm 80 tooth blade // Style: Carbide-Tipped blade for cutting aluminum, non-ferrous metals and polymeric materials with Freud's exclusive TiCo Hi-Density Carbide designed and manufactured specifically for each cutting application to maximize cutting life...
  • Disco Sierra BOSCH 2608641188 Precisión superior Opwoh 7.4
    Precio:  $3,189.00

    Disco Sierra BOSCH 2608641188 Precisión superior Opwoh 7.4

    -Titulo Original : Bosch 2608641188 Circular Saw Bladetop Precision Opwoh 7.48inx30mm 60t-Fabricante : Bosch-Descripcion Original: Dimensions: 7.48inx30mm // Ideal for rip cuts and cross cuts in softwood, hardwood, chipboards, casing boards // Body and Expansion slots lower vibration and reduce noise and heat production // For over 125 years the name “Bosch” has been associated with forward-looking technology and Trailblazing inventions that have made history. Bosch does business all over the world and is Active in the most wide-ranging sectors. Here you can find out more about our business sectors and divisions in Germany...
Mostrar del 1 al 24 (de 901 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]