Arriba

Pinturería > Accesorios para Pintura > Pistolas para Pintar

Mostrar: 
Mostrar del 1 al 24 (de 100 productos)
Páginas de Resultados:  1  2  3  4  5  [Siguiente >>] 
  • 2 Boquillas 515 reversibles para pistolas pintura Airless
    Precio:  $5,269.00

    2 Boquillas 515 reversibles para pistolas pintura Airless

    -Titulo Original : Jewboer 2 Pack Reversible Spray Tip Nozzle for Airless Paint Spray Guns and Airless Sprayer Spraying Machine (515)-Fabricante : Jewboer-Descripcion Original: Compatible with OEM Part # SNN5971A FW3S ** Voltage: 3.8V ** Capatity: 300mAh ** Type: Li-ion Battery. ** Built to last with up to 500 cycles Compatible with Phone Models : Motorola Moto 360 2nd Gen 42mm 2015. The battery was tested many times before it was delivered to the custome. Each battery comes with a special chip to protect your smart phone from over-heating, short-circuit...
  • Pistola Para Pintar Airless 3600psi/250bar Con Protector De Boquilla Para Pulverizador De Bomba Graco Wagner Titan
    Precio:  $10,099.00

    Pistola Para Pintar Airless 3600psi/250bar Con Protector De Boquilla Para Pulverizador De Bomba Graco Wagner Titan

    -Titulo Original : Airless Paint Spray Gun with Nozzle Guard for Graco Wagner Titan Pump Sprayer 3600PSI High Pressure Spray Gun-Fabricante : LOVEHAPPY-Descripcion Original: High quality,Don't leak. // Can be used on most of airless paint sprayers // Easy to cleaning the spray gun. // 3600 PSI Maximum Pressure, four-finger trigger, soft pull // Inlet fitting 1/4 Inch Thread, Swivel Joint // This paint spray gun can use for spray gun replacement of airless sprayer with fine atomization and high efficiency. Maximum Operating Pressure: 3600psi Can be used on most of the airless paint sprayers. Our worry-free 6-month warranty and friendly customer service...
  • Pistola Para Pintar .8mm Mini Con .5mm & 1.0mm Tips & Tap...
    Precio:  $16,279.00

    Pistola Para Pintar .8mm Mini Con .5mm & 1.0mm Tips & Tap...

    -Titulo Original : .8mm MINI GRAVITY FEED SPRAY GUN WITH .5mm & 1.0mm TIPS & Side Mounted CUP-Fabricante : TCP GLOBAL-Descripcion Original: Miniature "Pistol Grip" Spray Gun Includes 3 Fluid Atomizing Nozzle Sets in Sizes 0.5mm, 0.8mm & 1.0 // Allows this Miniature Spray Gun to perform as a Touch-Up & Detail Spray Gun with the 0.8 & 1.0 tips // This Multi-Purpose Miniature Spray Gun is well suited for uses demanding precise control of spray // The 7 ounce gravity cup is side-mounted and rotates, allowing you to spray horizontally& vertically // This Gun provides a minimum amount of overspray // This Gun provides a minimum amount of overspray, making it excellent for situations where an Automotive Touch-Up Spray Gun would normally be used. It's commonly used by Auto Painters, Hobbyist and Artists for Paint Chip Repairs, Signs, Backgrounds, Murals, Etc... Air Inlet: 1/4 Air Pressure: 30-60 PSI (2.0-4.0bar) Air Consumption: 2.5-6.0 CFM Cup: 7 Ounces (200 ml) Aluminum Gravity Feed Side Mount Nozzle Atomizing Sets in sizes: 0.5mm, 0.8mm & 1.0m...
  • Pistola Para Pintar PowerMate Vx 010-0035CT
    Precio:  $11,989.00

    Pistola Para Pintar PowerMate Vx 010-0035CT

    -Titulo Original : PowerMate Vx 010-0035CT Gravity Feed Spray Gun-Fabricante : POWERMATE VX-Descripcion Original: Easy-to-identify laser etched knobs for air, Fluid and pattern Controls show the user how to control the spray pattern - laser etching will not rub off // Light weight plastic cup allows visibility of Fluid level and screw on lid with adjustable vent // Lightweight aluminum construction body and ergonomic pistol grip handle provides improved comfort and control // Red anodized knobs and trigger for a long lasting professional finish // Includes 1/4 in. Nps female plug, extra filter, wrench and cleaning brush and wire // This PowerMate Vx general Purpose gravity feed spray gun minimizes paint usage and simplifies tool clean-up. Stainless steel fluid needle works great for spraying water based materials and solvents. External mix spray nozzle provides improved comfort and control...
  • Pistola Para Pintar PNTGREEN Professional HVLP Air - Boqu...
    Precio:  $14,649.00

    Pistola Para Pintar PNTGREEN Professional HVLP Air - Boqu...

    -Titulo Original : PNTGREEN Professional HVLP Gravity Feed Air Spray Gun - 1.4mm -1.8mm Nozzle,20 Oz (Free Spray Gun Keychain)-Fabricante : PNTGREEN-Descripcion Original: Save money by using Spray Width (230-260mm) spray gun . // A massive 86% transfer efficiency rate. // Save money by using high quality spray gun on material cost. // Suits for almost all kinds of paint. // Lightweight and compact //...
  • Pistola para Pintar ANEST IWATA LPH400 LPH-400-144LV de 1...
    Precio:  $144,449.00

    Pistola para Pintar ANEST IWATA LPH400 LPH-400-144LV de 1...

    -Titulo Original : ANEST IWATA LPH400 LPH-400-144LV 1.4 mm LPH400LV Spray Gun without Cup-Fabricante : ANEST IWATA-Descripcion Original: Fluid Nozzle Size mm (inch): 1.4 (0.055) // Atomizing PSI: 16.0 // CFM: 9.5 // Air Cap Model: LV4 // Fluid Output ml/min: 130 // High performance center post gravity feed HVLP spray gun with low air consumption and superior atomization utilizing LV technology and our tulip inspired spray pattern. The gravity-feed design provides for easy clean up and reduces material waste. Application:Woodwork, Furniture, Metal,Automotive refinish Touch-ups, Base Coat, Top Coa...
  • Pistola Para Pintar de aire Neiko 31215A HVLP 1.7 mm Tama...
    Precio:  $16,079.00

    Pistola Para Pintar de aire Neiko 31215A HVLP 1.7 mm Tama...

    -Titulo Original : Neiko 31215A HVLP Gravity Feed Air Spray Gun, 1.7 mm Nozzle Size, 600 cc Aluminum Cup, 1.7 mm nozzle-Fabricante : NEIKO-Descripcion Original: HEAVY DUTY: one-piece all steel gun body, rust-resistant stainless steel nozzle and solid brass cap for durability and longevity // CLASSIC HVLP gravity feed fluid delivery design works together with three adjustable valve knobs for precise paint application // SPECS: operation pressure 40 PSI; Working pressure 10 PSI; Average air consumption 4.5 CFM // MULTI USE: color coded 1.7mm nozzle size is perfect for metallic basecoat, primer and a variety of automotive and household painting projects // SET INCLUDES: 600cc (20.3 fl. oz) aluminum cup with lid, metal air gauge/regulator, a cleaning brush and a multi-size wrench // Size: An outstanding value in a professional-quality HVLP set to get you professional spraying and painting results. One-year warranty and Satisfaction Guarantee...
  • Pistola Para Pintar Por Gravedad Oemtools 25827
    Precio:  $19,749.00

    Pistola Para Pintar Por Gravedad Oemtools 25827

    -Titulo Original : OEMTOOLS 25827 Gravity Feed Spray Gun-Fabricante : OEMTOOLS-Descripcion Original: Capacity: 125 cc // Standard Fluid Nozzle Size: 1.4 mm // Recommended Air Pressure: 43 psi // Average Air Consumption: 3.2 CFM // Air Inlet Thread Size: 1/4 Inch NPT // Product Description The OEM Gravity Feed Spray Gun is ideal for all types of paint and restoration jobs. From the Manufacturer The OEMTOOLS 1/2 Inch Drive Heavy Duty Air Impact Wrench is ideal for use in the home or garage...
  • Pistola Para Pintar Powermate Px P010-0037SP Hlvp
    Precio:  $23,649.00

    Pistola Para Pintar Powermate Px P010-0037SP Hlvp

    -Titulo Original : Powermate Px P010-0037SP Hlvp Gravity Feed Spray Gun-Fabricante : POWERMATE PX-Descripcion Original: Integrated air adjustment knob to provide more control // Laser etching on the control knobs to show increase/decrease - laser etching will not rub off // Gravity feed gun minimizes paint usage and simplifies tool clean-up // Aluminum paint cup with screw on lid prevents accidental spilling and includes external mix spray nozzle for a professional quality finish // Precision balance aluminum construction enhances mobility and control // The Powermate Px HVLP gravity feed spray gun is perfect for spraying a variety of low viscosity materials that require fine atomization for a smooth finish such as stains, lacquers and automotive enamels. The HVLP (high volume low pressure) design generates high output, provides improved paint transfer and has less overspray of paint. Stainless steel fluid needle allows spraying of water and solvent based materials...
  • Boquilla 311 Para Pistola De Aire Wagner Titan Atomex Graco
    Precio:  $3,579.00

    Boquilla 311 Para Pistola De Aire Wagner Titan Atomex Graco

    -Titulo Original : Comidox HOT 2/3/4/5/6 Series Airless Spray Gun Tip For Titan Wagner Paint Sprayer 311 1pcs-Fabricante : Comidox-Descripcion Original: 100% nuevo y de alta calidad. Boquilla pulverizadora serie 2/3/4/5/6, el modelo es completo, fácil de usar, duradero. Fácil operación, excelente atomización y capacidad de limpieza anti-cambio. Dependiendo del tamaño de la apertura, el rango será diferente. Debido a su excelente diseño, rápido y fácil de limpiar, simplemente gire la boquilla para lavarla. El dígito frontal representa la velocidad de pulverización, cuanto mayor es el número, más ancho es el patrón de pulverización, seguido de dos representantes del flujo, cuanto mayor es el número, mayor es el flujo. Adecuado para la mayoría de los pulverizadores sin aire, como Wagner, Titan, Atomex, Graco, AGR Brand y más...
  • Pistola para Pintar Cepillo de aire Paasche LMG-10 HVLP d...
    Precio:  $21,269.00

    Pistola para Pintar Cepillo de aire Paasche LMG-10 HVLP d...

    -Titulo Original : Paasche Airbrush LMG-10 HVLP Touchup Spray Gun-Fabricante : PAASCHE AIRBRUSH-Descripcion Original: Help gravity feed // 1.0 mm spray head // Stainless steel tip and needle with pate packing's // 1/2to 7Adjustable spray pattern // Includes maintenance tools // The lmg-14 is a gravity feed help spray gun. Light weight and easy to control, perfect for small to medium size Jobs. Adjustable to achieve round and flat spray patterns. Get a superior finish while saving paint. Help spray guns apply paint with less force which reduces both over spray and paint bounce from the surface. Both the fluid tip and needle are stainless steel allowing the use of water based materials...
  • Pistola Para Pintar Ingersoll Rand 200G Edge Series de re...
    Precio:  $22,919.00

    Pistola Para Pintar Ingersoll Rand 200G Edge Series de re...

    -Titulo Original : Ingersoll Rand 200G Edge Series Touch-up Gravity Feed Spray Gun, Black-Fabricante : INGERSOLL-RAND-Descripcion Original: Non-drip cup protects against paint loss and ensures less mess, saving you time and money // Filter adjustment knob provides versatility, allowing you to adjust air flow for any type of project // Spray pattern adjustment knob allows precision to complete a variety of tasks // Air regulator with gauge is user-friendly and allows you to control air flow // Air Inlet: 1/4", Max Air Pressure: 35 PSIG, Avg Air Consumption: 5 cfm, Cup Capacity: 4.2 oz, Fluid Nozzle Size: 0.03" (0.8 mm), Min. Hose Size: 5/16" // Product Description Ingersoll Rand’s Edge Series 200G Spray Gun is designed for paint, lacquer, stain, or other finish type material. The 200G is a perfect fit for your DIY and hobby work projects, such as furniture restoration, car restoration, or a variety of other projects. From the Manufacturer Sprayer designed for paint, lacquer, stain or other finish type material. Part of Ingersoll Rand's Edge Series line of air tools: legendary performance at an affordable price...
  • Pistola Para Pintar Powermate Vx 010-0029CT HVLP
    Precio:  $17,789.00

    Pistola Para Pintar Powermate Vx 010-0029CT HVLP

    -Titulo Original : Powermate Vx 010-0029CT HVLP Gravity Feed Spray Gun 3-Piece Kit-Fabricante : POWERMATE-Descripcion Original: Includes a HVLP Spray Gun with a 600-CC Paint Cup and 1.4-MM Nozzle // Includes a HVLP Spray Gun with 120-CC Paint Cup and 0.8-MM Nozzle // Includes an Air Regulator with Gauge // Offers an Operating Pressure of 30 to 60-PSI // Features Air requirements of 4.2 to 7.1-CFM and Air Inlet Measures 1/4-Inches // Powermate Vx 010-0029CT HVLP Gravity Feed Spray Gun 3-Piece Kit is perfect for spraying thin to heavy materials that require fine coverage and detail. The Powermate Vx HVLP Gravity Feed Spray Gun 3-Piece Kit minimizes paint usage and simplifies tool clean-up. The Powermate Vx HVLP Gravity Feed Spray Gun 3-Piece Kit includes a large HVLP spray gun with a 600-Cubic Centimeter paint cup and 1.4-Millimeter nozzle, small HVLP spray gun with 120-Cubic Centimeter paint cup and 0.8-Millimeter nozzle, and an air regulator with gauge. The Operating pressure is 30 to 60-PSI. Air requirements are 4.2 to 7.1-CFM. Air inlet is 1/4-Inches. Powermate is one of the world's leading brands of portable and standby electric generators, air compressors, water pumps, air tools, pressure washers, and accessories...
  • Pistola Para Pintar Fuji 5175G - T75G
    Precio:  $134,949.00

    Pistola Para Pintar Fuji 5175G - T75G

    -Titulo Original : Fuji Spray 5175G - T75G Gravity Spray Gun-Fabricante : FUJI SPRAY-Descripcion Original: Professional Spray Gun features convenient side pattern control knob to adjust size of fan pattern from small to large // Non-Bleed Spray Gun for less blowing around of shop dust // New sleek lightweight design.Stay-cool nylon handle (fitted over a metal tube) // High-Efficiency Air cap installed for even less overspray and superb atomization // 100% stainless steel fluid components, ergonomic stay cool handle // Product Description The Fuji Spray T-Series Spray Gun features a side Pattern Control Knob to adjust the size of the fan from small to large and any size in between. The Pattern Control Knob allows you to adjust to the exact size of the object you are spraying. The newly designed lightweight T-Series with Easy Pull Trigger means less fatigue for the operator. Other desirable features include 100% Stainless Steel fluid components, Stainless Springs, Metal Knobs, Rear Rotating Nipple for pressure tubes, Ergonomic Stay-Cool Handle. Installed with a 600cc Cup – this is the ideal size for small to medium sized projects. Four different sizes of gravity cups available. 1.3mm Aircap Set #3 is installed – perfect size for most fine-finishing. The T-Series delivers superb atomization and ultimate control. From the Manufacturer The Fuji Spray T-Series Spray Gun features a side Pattern Control Knob to adjust the size of the fan from small to large and any size in between. The Pattern Control Knob allows you to adjust to the exact size of the object you are spraying. The newly designed lightweight T-Series with Easy Pull Trigger means less fatigue for the operator. Other desirable features include 100% Stainless Steel fluid components, Stainless Springs, Metal Knobs, Rear Rotating Nipple for pressure tubes, Ergonomic Stay-Cool Handle. Installed with a 600cc Cup – this is the ideal size for small to medium sized projects. Four different sizes of gravity cups available. 1.3mm Aircap Set #3 is installed – perfect size for most fine-finishing. The T-Series delivers superb atomization and ultimate control...
  • Pistola Para Pintar Iwata W-400 132g (boquilla De 1.3mm)
    Precio:  $88,969.00

    Pistola Para Pintar Iwata W-400 132g (boquilla De 1.3mm)

    -Titulo Original : Iwata W-400 132G(1.3mm Nozzle) without cup-Fabricante : IWATA-Descripcion Original: Type of feed: Gravity feed // Fluid nozzle orifice: 1.3mm // Atomizing air pressure (MPa): 0.20-0.29 // Air consumption (L/min): 280-370 // Pattern width (mm): 260-300 // -Spray distance: 250mm -Paint viscosity: 22 sec. (20 sec./male NK-2). -All models: fluid nipple G 1/4(male), air nipple G 1/...
  • Pistola Para Pintar 3m 16580 Sistema De Pulverizadora Acc...
    Precio:  $77,459.00

    Pistola Para Pintar 3m 16580 Sistema De Pulverizadora Acc...

    -Titulo Original : 3M 16580 Accuspray Spray Gun System with Standard PPS-Fabricante : 3M-Descripcion Original: Feed Type: Gravity Feed // Series: PPS // 3M Number: 16580 // Product Type: All-in-One Hand-Held Spray Gun Kit // Trade Name: Accuspray // Style: Includes: 1 - Accuspray Spray Gun; 1 - Air Control Valve; 1 - 1.2 mm Blue Atomizing Head; 1 - 1.3 mm Green Atomizing Head; 1 - 1.4 mm Orange Atomizing Head; 1 - 1.8 mm Clear Atomizing Head; 1 - Standard 22 oz Mixing Cup & Collar; 4 - 22 oz Lids & Liners with 200 Micron Strainer; 1 - 22 oz Lid & Liner with 125 Micron Strainer; 1 - PPS Generic Mix Ratio Insert Film; 1 - Easy to Use Instruction Manual...
  • Pistola Para Pintar TruePower 03-0859 Car Mini HVLP Detai...
    Precio:  $7,519.00

    Pistola Para Pintar TruePower 03-0859 Car Mini HVLP Detai...

    -Titulo Original : TruePower 03-0859 Car Spray Paint Gun (Mini HVLP Gravity Feed Detail and Touch Up, 0.6 Needle/Nozzle)-Fabricante : TRUEPOWER-Descripcion Original: Adjustable pattern // Designed for detail painting // Gravity feed // All metal construction // This economy miniature detail spray gun is ideal for precise control of spray and atomization when applying to a variety of surfaces and to different sized areas. The 4 ounce (200 ml) gravity cup is side-mounted and rotates, allowing you to spray horizontally, vertically or underneath surfaces making it excellent for small or hard to reach areas. 0.6mm Needle/Nozzle Requires 7.5 CFM at 40 PSI 1/4 NPT air inlet...
  • Pistola Para Pintar Titan Tools 19018 HVLP
    Precio:  $16,299.00

    Pistola Para Pintar Titan Tools 19018 HVLP

    -Titulo Original : Titan Tools 19018 Gravity Feed HVLP Spray Gun-Fabricante : TITAN TOOLS-Descripcion Original: Gravity feed HVLP spray guns // Locking pressure regulator with gauge // Stainless steel needle // 600 cc plastic paint cup // For primer and heavy materials. Locking air regulator with gauge, brass fluid and air nozzle. Required CFM: 7-9, Air Inlet Size (in. NPT): 1/4, Nozzles Included (qty.): 1, Nozzle Size (mm): 1.8, Paint Cup Size (oz.): 20 1/4, Paint Cup Material: Plasti...
  • Pistola para Pintar TCP Global Brand Professional Hvlp pu...
    Precio:  $24,219.00

    Pistola para Pintar TCP Global Brand Professional Hvlp pu...

    -Titulo Original : TCP Global Brand Professional Hvlp Primer Spray Gun with 2.0 Nozzle/Tip/Regulator (Primer Gun)-Fabricante : TCP GLOBAL-Descripcion Original: TCP Global Brand High Performance HVLP Spray Gun with a 2.0 mm Fluid Tip, 1 Liter Aluminum Cup and a Air Regulator // The 2.0mm Fluid Tip enables You to Spray Thicker Materials such as Extreme High Build or Polyester Primers, Thick Enamels, Thinned Latex Paints, Chip Guard, Metal Flakes, Gel Coats, Etc... // Spray Gun has Control Knobs for Full Adjustment over Spray Pattern, Fluid Control and Air Pressure. Contains a Stainless Steel Needle and Nozzle Set. // Gun has a full baffle head assembly that enables it to produce a Fully Atomized and Consistent Spray Pattern for a Smooth Professional Finish! // Full One Year Warranty //...
  • Filtros para Titan LX80II, Titan LX80, 60 Mesh White
    Precio:  $3,959.00

    Filtros para Titan LX80II, Titan LX80, 60 Mesh White

    -Titulo Original : Titan Airless Spray Gun Filter 500-200-06 for Titan LX80II, Titan LX80, 60 Mesh White. 5PACKS -Fabricante : SENMING WIRE MESH-Descripcion Original: Precaución: el protector no cubre el área de visualización completa debido a los bordes curvos del dispositivo; tenga en cuenta esto antes de comprar; Aviso: no es compatible con Fitbit Versa Protección perfecta: funciona solo con Fitbit Versa Lite; protector de pantalla de vidrio templado de alta calidad, con máxima protección contra rasguños, raspaduras y golpes Pantalla ultra clara: el revestimiento de pantalla transparente hidrofóbico y oleofóbico de alta definición protege contra el sudor y los residuos de aceite de las huellas dactilares Experiencia de pantalla natural: este protector de pantalla de vidrio presenta una dureza superficial (9H), que es 3 veces más fuerte que la película de PET, y brinda la experiencia de pantalla natural que necesit...
  • Pistola Para Pintar Hvlp 500ml Taza 1.4mm Boquilla Rojo
    Precio:  $6,509.00

    Pistola Para Pintar Hvlp 500ml Taza 1.4mm Boquilla Rojo

    -Titulo Original : HVLP Spray Gun Gravity Feed Paint Gun 500ml cup,1.4mm Nozzle, Red-Fabricante : SHININGEYES-Descripcion Original: Nozzle Size:1.4mm, 0.5 Liter Non-Drip Cup // Great surface coating performance, Finest atomization, professional CAR PAINT GUN // 3 Knobs for full adjustment: Fluid, Pattern and Air Pressure Controls. // Standard Size 1/4" Air Inlet // All internal passages are anodized and the anodized body makes it easy to clean. // Description: Professional HVLP Gravity Spray Gun 0.5L Non-drip Paint Cup with Nozzle Tip Size 1.4mm This 1.4mm Fluid Tip is Ideal for Optimal Atomizing when Spraying Base-coats, Clear-coats and other Light to Medium Viscosity Materials. Professional CAR PAINT GUN. Specifications: 1.4mm Gravity Sprayguns Cup Size: 500ml MAX Operation Pressure:12 Bar(175PSI) Service Temperature: 0-40¡æ (32 to 104¨H) Anodisedaluminium gun body Stainless steel fluid nozzle and needle set Nickel plated brass air cap Features: * One-piece all steel gun body, rust-resistant stainless steel nozzle and solid brass cap for durability and longevity. * Spray Gun has Control Knobs for Full Adjustment over Spray Pattern, Fluid Control and Air Pressure. * HVLP(High Volume Low Pressure) Spray gun with advanced new technology providing finest atomization & classic quality Package: Hvlp 1.4mm Gravity Paint Spray gun: Spray gun with cup, Multifunction Spanner, Socket Spanner, Cleaning Brush, Optional Filter and Detailed instruction...
  • Pistola Para Pintar Devilbiss 802405...
    Precio:  $43,249.00

    Pistola Para Pintar Devilbiss 802405...

    -Titulo Original : DeVilbiss 802405 Spray Gun-Fabricante : DEVILBISS-Descripcion Original: Starting Line Detail and Touch-Up HVLP Gravity Spray Gun // Includes 1 Year Limited // 1 Mini-Size Touch-Up STARTINGLINE HVLP Gravity Feed Spray Gun with a 1. 0mm Fluid Tip and a 8. 5 oz. Me // This 1. 0mm set-up is suitable for Spot Repairs using a variety of Coatings // Comes with Cleaning Brush and Maintenance Wrench // Value priced mini HVLP detail gun1. 0mm fluid tip is suitable for a spraying a variety of materials cleaning brush and wrench30 PSI inlet pressure delivers 10 PSI at the air cap; 8 CFM air consumptions with Devil biss 1 Year Limite...
  • Pistola Para Pintar de aire profesional HVLP de 20 oz.
    Precio:  $35,739.00

    Pistola Para Pintar de aire profesional HVLP de 20 oz.

    -Titulo Original : Central Pneumatic 20 Oz. Professional HVLP Gravity Feed Air Spray Gun-Fabricante : Central Pneumati...
  • Pistola Para Pintar Devilbiss De Alta Eficiencia Gfg670 Plus
    Precio:  $202,089.00

    Pistola Para Pintar Devilbiss De Alta Eficiencia Gfg670 Plus

    -Titulo Original : DeVilbiss (GFG670 Plus High Efficiency Gravity Feed Spray Gun-Fabricante : DEVILBISS-Descripcion Original: PLUS GUN (DEV-GFG670) // High efficiency gravity feed gun/cup Experience the power of plus Powerful atomization Twice the energy available in HVLP guns. Powerful productivity Super fast fluid flow for high speed painting Powerful efficiency Equal to or better tha...
Mostrar del 1 al 24 (de 100 productos)
Páginas de Resultados:  1  2  3  4  5  [Siguiente >>]