Arriba

Componentes Electrónicos > Arduino

Mostrar: 
Mostrar del 1 al 24 (de 147 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Arduino Kit WINGONEER® (6XXKKQBH)
    Precio:  $1,389.00

    Arduino Kit WINGONEER® (6XXKKQBH)

    -Titulo Original : WINGONEER® MB102 Solderless Breadboard + 3.3V 5V Power Supply Module +65pcs Breadboard Jumper Wire Cable DIY Kit for Arduino S07-Fabricante : WINGONEER®-Descripcion Original: This Breadboard Prototyping Starter Kit has everything you need to start with a good prototyping base for your circuits. // This is a combination of the 830 Points MB102 Breadboard + Power Supply Module 3.3V/5V +65PCS Dupont male to male Breadboard jumper cable wires for Arduino DIY projects programming. // Transparent clear 830 MB-102 Tie-points, BB830,2 Power Lanes, 200pts, 16.5 X 5.4 X 0.85 CM for Arduino Projects Proto Shield Proto-typing // On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use. // Double sided tape on bottom. Can be fixed on a flat surface. // 1.MB-102 830 ties plug-in transparent solderless breadboard 830 tie points total: 630 tie-point IC-circuit area plus two 100 tie-point distribution strips providing 4 power rails. Contacts are Phosphor Bronze with Plated Nickel Finish, rated for 50,000 insertions. Rated at 36 Volts, 2 Amps. Insertion Wire Size is 21 to 26 AWG, 0.016 to 0.028 inches diameter (0.4 to 0.7mm diameter) Size: 6.5 x 2.2 x 0.3in (165.1 x 54.6 x 8.5mm) Peelable adhesive tape backing provided for attaching to a surface. 2.3.3V 5V Breadboard Power Supply Module Input Voltage : DC 6.5-12V;Output Voltage : DC 3.3V 5V Material : Plastic, Electronic Part;Net Weight : 13g Fit for MB-102 830 400 breadboard 3.65PCS male to male dupont jumper wires connector kit 1x 830 Points MB102 Breadboard 1x 3.3-5.5V Power supply module 1x 65*Jumper Wir...
  • VERTER 5V USB Buck-Boost - 500mA from 3V-5V / 1000ma from...
    Precio:  $1,689.00

    VERTER 5V USB Buck-Boost - 500mA from 3V-5V / 1000ma from...

    -Titulo Original : VERTER 5V USB Buck-Boost - 500mA from 3V-5V / 1000ma from 5V-12V-Fabricante : ADAFRUIT-Descripcion Original: Synchronous operation means you can disconnect the output completely by connecting the ENable pin to ground. This will completely turn off the output // 2A internal switch means you can get out 500mA from as low as 3V, and at least 1000mA from inputs as high 12V // On-board 500mA charge-rate 'Apple/iOS' data resistors. Solder in the included USB connector and you can plug in any iPhone or iPod for 500mA charge rate. Not suggested for iPad (which really needs 1A charge rate). // Full breakout for battery in, control pins and power out // 90%+ operating efficiency in most cases (see datasheet for efficiency graphs), and low quiescent current: 5mA when enabled and power LED is on, 20uA when disabled (power and low batt LED are off) // Convert just about any battery pack to 5V with VERTER - our fresh new Buck-Boost power converter. VERTER can take battery voltages from 3-12VDC and output a nice 5V DC, which makes it a perfect universal power supply for your portable project! Where Verter really shines is when you have a battery or power range that can fluctuate a lot, or you don't know what you'll end up using. It operates smoothly over the 3-12V range, moving from a boost converter (3-5V in) to a buck converter (5-12V in) on the fly. Please note! This chip can do both, but it really works better as a buck converter than a boost. If you need a full 500mA out, it will struggle as it gets down to 3V and the output will sag to about 4.8V (which is still within standard USB power specs). If you only need something to boost a voltage up to 5V and you want it to be really good at it, check out our PowerBoost series, which excel at that. Like our popular 5V 1A USB wall adapter, we tweaked the output to be 5.2V instead of a straight-up 5.0V so that there's a little bit of 'headroom' long cables, high draw, the addition of a diode on the output if you wish, etc. The 5.2V is safe for all 5V-powered electronics like Arduino, Raspberry Pi, or Beagle Bone while preventing icky brown-outs during high current draw because of USB cable resistance. The VERTER has at the heart a TPS63060 boost converter from TI. This buck-boost converter chip can handle a wide range of voltages (3-12V) and has some really nice extras such as power good output, 2A internal switch, synchronous conversion, excellent efficiency, and 2.2MHz high-frequency operation. Check out these specs...
  • Teensy 3.6 (without Pins)
    Precio:  $4,919.00

    Teensy 3.6 (without Pins)

    -Titulo Original : Teensy 3.6 (Without Pins)-Fabricante : PJRC-Descripcion Original: 180 MHz ARM Cortex-M4 with Floating Point Unit // 1M Flash, 256K RAM, 4K EEPROM // Microcontroller Chip MK66FX1M0VMD18 // 180 MHz ARM Cortex-M4 with Floating Point Unit 1M Flash, 256K RAM, 4K EEPROM Microcontroller Chip MK66FX1M0VMD18 USB High Speed (480 Mbit/sec) Port 2 CAN Bus Ports 32 General Purpose DMA Channels 22 PWM Outputs 4 I2C Ports 11 Touch Sensing Inputs 62 I/O Pins (42 breadboard friendly) 25 Analog Inputs to 2 ADCs with 13 bits resolution 2 Analog Outputs (DACs) with 12 bit resolution 22 PWM Outputs USB Full Speed (12 Mbit/sec) Port Ethernet mac, capable of full 100 Mbit/sec speed Native (4 bit SDIO) micro SD card port I2S Audio Port, 4 Channel Digital Audio Input & Output 14 Hardware Timers Cryptographic Acceleration Unit Random Number Generator CRC Computation Unit 6 Serial Ports (2 with FIFO & Fast Baud Rates) 3 SPI Ports (1 with FIFO) 4 I2C Ports Real Time Cloc...
  • Wingoneer M5stack Esp32 Kit Plc Prototype Modulo De Placa Industrial Rs485 Acs712-5b Controlador Logico Programable Rele
    Precio:  $3,349.00

    Wingoneer M5stack Esp32 Kit Plc Prototype Modulo De Placa Industrial Rs485 Acs712-5b Controlador Logico Programable Rele

    -Titulo Original : WINGONEER® M5Stack ESP32 Kit PLC Prototype Industrial Board Module RS485 ACS712-5B Programmable Logic Controller Relay Magnet DIN-Rail Stackable IOT for Arduino DIY-Fabricante : WINGONEER%C2%AE-Descripcion Original: New Serials: This is a new ESP32 kit and it's stackable IoT kit. // Component: including RS485 adapter. Can be realized in China serial 2 (G16 /17) RS485. ACS712-5B module including. // Reading electricity level by G34, can get current value port. With DC924V power input, PLC-Proto motherboard reserved 6Pin / 4Pin relay output, digital input, communication interface etc. // For people: Software / hardware product engineers, designers, project contractors, enthusiasts, start-ups, educational groups and Maker groups. // The ESP32 development kit has been successfully certified by the Microsoft Azure IoT Starter Kit, which connects quickly and securely to the Azure cloud service platform. This is a new ESP32 kit, include RS485 adapter. Can be realized in China serial 2 (G16 / 17) RS485. ACS712-5B module including. Reading electricity level by G34, can get current value port. With DC9~24V power input, PLC-Proto motherboard reserved 6Pin andamp; 4Pin relay output, digital input, communication interface etc. Software / hardware product engineers, designers, project contractors, enthusiasts, start-ups, educational groups and Maker groups. Model: PLC Module Camera Equipped: No Assembly: Almost ready Individual package weight: 0.1kg (0.22lb.) Package size: 5cm * 5cm * 5cm (1.97in * 1.97in * 1.97in) 1x ESP32 Kit PLC Prototype Industrial Board Module RS485 ACS712-5B Programmable Logic Controller Relay Magnet DIN-Rail Stackable IOT for Arduino DI...
  • Adafruit PiTFT 2.2 HAT Mini Kit - 320x240 2.2 TFT - No Touch
    Precio:  $4,749.00

    Adafruit PiTFT 2.2 HAT Mini Kit - 320x240 2.2 TFT - No Touch

    -Titulo Original : Adafruit PiTFT 2.2 HAT Mini Kit - 320x240 2.2 TFT - No Touch-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2315 // It's designed to plug directly onto the Raspberry Pi 2, Pi 3, Pi Zero or Raspberry Pi 1 Model A+ or B+ . While not specifically designed for Pi Model A or B, you can use it with A/B if you solder in an extra-tall 2x13 header (not included) instead of the included 2x20 header // Some Soldering Required: Comes as a fully assembled display PCB and an additional 2x20 GPIO header. Some light soldering is required to attach the 2x20 GPIO header to the HAT but it's fast and easy for anyone with a soldering iron and solder. // Troubleshooting: There are a variety of issues that may cause the screen to not working properly including the "White Screen" issue. If you experience any issues you may contact the seller or Adafruit for support under the warranty. // Skill Level: A medium/high level of familiarity with raspberry pi is recommended for this product. // The cute PiTFT got even more adorable with this little primary display for Raspberry Pi in HAT form! It features a 2.2 display with 320x240 16-bit color pixels. The HAT uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top of your Model A+ or B+ and fits into our case quite nicely. It's designed to plug directly onto the Raspberry Pi 2, Pi 3, Pi Zero or Raspberry Pi 1 Model A+ or B+ . While not specifically designed for Pi Model A or B, you can use it with A/B if you solder in an extra-tall 2x13 header (not included) instead of the included 2x20 header This design uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25. All other GPIO are unused and are available on a 25-pin long breakout line. Since we had a tiny bit of space, there's 4 flat tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on/off button. Comes as a fully assembled display PCB and an additional 2x20 GPIO header. Some light soldering is required to attach the 2x20 GPIO header to the HAT but it's fast and easy for anyone with a soldering iron and solder. You can also swap the plain female header we have with a 'stacky' type that lets you plug in a hat or GPIO cable on top or a slim ultra-low-profile header...
  • Contempo Views Pack de 2 motores paso a paso con controlador y estuche de transporte
    Precio:  $3,419.00

    Contempo Views Pack de 2 motores paso a paso con controlador y estuche de transporte

    -Titulo Original : Contempo Views Pack of 2 Gear Stepper Motor w/Driver + Carrying Case-Fabricante : Contempo Views-Descripcion Original: Includes EVA carrying case ($10 value) // On-board ULN2003A chipset // On-board 4-way indicator light // Compatible with Arduino // Mainly used in air conditioner louver, small cooling and heating fan etc. Stable and all technic parameters are qualified for national electronic standard of SJ/T10689-95. - Rated Voltage: DC 5V - Number of Pole: 4 - Speed Variation Ratio: 1/64 - Stride Angle: 5.625 deg/64 - DC Resistance: 200Ω ± 7%(25 deg C) - Idle In-traction Frequency: > 600Hz - Idle Out-traction Frequency: > 1000Hz - In-traction Torque: > 34.3mN.m(120Hz) - Self-positioning Tor: > 34.3mN.m - Insulated Resistance: > 10MΩ(500V) - Insulated Electricity Power: 600VAC/1mA/1s - Insulation Grade: A - Rise in Temperature: - Noise...
  • Adaptador Convertidor De Datos Rs232 A Rs485 / Rs422 Dtech
    Precio:  $2,149.00

    Adaptador Convertidor De Datos Rs232 A Rs485 / Rs422 Dtech

    -Titulo Original : DTECH RS232 to RS485 / RS422 Serial Communication Data Converter Adapter Mini-Size-Fabricante : DTECH-Descripcion Original: Convertidor RS232 a RS485 / RS422 de grado profesional. Le permite conectar fácilmente cualquier dispositivo RS485 o RS422 directamente al puerto COM La mejor solución para la comunicación entre el puerto serie y el dispositivo RS485 o RS422 Tecnología exclusiva de accionamiento de bomba de carga en serie, sin fuente de alimentación externa, la comunicación real de tres cables (TXD, RXD, GND). No necesita inicialización de puerto serie Admite velocidades de transmisión de hasta 115.2 Kbps; Velocidad de señal serial de detección automática Admite una distancia de conexión máxima de 4000 pies (1200 m...
  • MakerFocus M5Stack TOF Módulo de unidad Módulo de s (Z5QM)
    Precio:  $3,269.00

    MakerFocus M5Stack TOF Módulo de unidad Módulo de s (Z5QM)

    -Titulo Original : MakerFocus ESP32 OLED WiFi Kit ESP-32 0.96 Inch OLED Display WiFi+Bluetooth CP2102 Internet Development Board for Arduino ESP8266 NodeMCU-Fabricante : MAKERFOCUS-Descripcion Original: Note: This item comes unassembled, soldering of headers is required. Can lithium battery powered, the lithium battery is not included, battery may be purchased here: https://www.amazon.com/dp/B079M2W85C. Link to download English documentation and pinout diagram: https://www.adrive.com/public/drzr3P/datasheet%20F000905.rar; https://drive.google.com/open?id=0B8DSGdAr8_31d19WQmN6SE1fLVE; GitHub: https://github.com/Heltec-Aaron-Lee/WiFi_Kit_series // 2. ESP32 development board, Support arduino IDE, WIFI 802.11 b/g/n/e/i, Transmit power: 19.5 dBm 11b, 16.5 dBm 11g, 15.5 dBm 11n // ESP32 OLED, development board with 0.96inch OLED display; UDP continues to throughput by 135 Mbps, Receiver sensitivity up to - 98 dBm, Supports Sniffer, Station, softAP and Wi-Fi Direct modes // Integrated dual-mode bluetooth( traditional bluetooth and BLE low power bluetooth) // We Have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking for your consultation! // WIFI Kit series is the new development of the cost-effective networking program, the main chip using Lexin ESP32, Tensilica LX6 dual-core processor, 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b / g / N HT40 Wi-Fi transceiver, baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth). Onboard 4MByte(32M-bit) Flash, Wi-Fi antenna, 0.96-inch blue OLED display, lithium battery charging circuit and interface, CP2102 USB to serial chip, the perfect support for Arduino development environment Operating voltage: 3.3V to 7V Operating temperature range: -40 ° C to + 90 ° C Data rate: 150 Mbps 11n HT40,72 Mbps 11n HT20,54 Mbps 11g, 11 Mbps 11b Transmit power: 19.5 dBm 11b, 16.5 dBm 11g, 15.5 dBm 11n Flash Size: 4MByte(32M-bit) Module Size:50*25.4*10.3 mm Lithium battery interface:2Pin-1.25mm interface Receiver sensitivity up to - 98 dBm UDP continues to throughput by 135 Mbps Supports Sniffer, Station, softAP and Wi-Fi Direct modes 1 * ESP32 Development Board with OLED 2 * Pin header...
  • Arduino Robot Kit Sunfounder (7hf3fhft)
    Precio:  $9,529.00

    Arduino Robot Kit Sunfounder (7hf3fhft)

    -Titulo Original : SunFounder Arduino Robotics Kit, 4-DOF Dancing Sloth Programmable DIY Robot Kit for Kids and Adults with Tutorial-Fabricante : SUNFOUNDER-Descripcion Original: High quality Sloth robot -updated with high performance 9G servo motors which confirm good quality. // Humanoid robot - the cute Bio robot walk with two legs, you can program on it to change its gestures and directions, liking Alternate speed and alternate left or right feet. Let's dancing with it. // Learn to code easily - you can learn how to code faster and easier than ever with visual programming language software, or Arduino code. // Obstacle avoiding - with the "eyes" (Ultrasonic), it can avoid obstacles Intelligently // Easy to assemble - the new generation educational toy is more easy for kids to assemble with the detailed instructions. //...
  • Grove / Pin Headers I2C 4 Channel Mux Extender / Expander Board para Arduino y Raspberry Pi
    Precio:  $2,949.00

    Grove / Pin Headers I2C 4 Channel Mux Extender / Expander Board para Arduino y Raspberry Pi

    -Titulo Original : Grove/Pin Headers I2C 4 Channel Mux Extender/Expander Board for Arduino and Raspberry Pi-Fabricante : SwitchDoc Labs-Descripcion Original: Converts one I2C bus (on Pi or Arduino) to 4 separate I2C buses. Expands and Extends I2C busses // Supports Arduino (5.0V I2C) and Raspberry Pi (3.3V I2C). All 4 I2C busses can have 5.0V or 3.3V power. // Has Grove Connectors as well as Pin Headers // Software drivers provided for Arduino and Raspberry Pi // Full Documentation and Software for Raspberry Pi and Arduino on www.switchdoc.com // The Grove I2C 4 Channel Mux Breakout Board is a TCA9545A based quad bidirectional I2C Expander and Multiplexor controlled via the I2C bus with GROVE connectors. The SCL/SDA controlling fans out to four downstream channels. It works for both the Arduino and Raspberry Pi. At SwitchDoc Labs, we love data. And we love I2C devices. We like to gather the data using lots of I2C devices on our computers and projects. We are always running into conflicts with addressing on the I2C device. Since there are no standards, sometimes multiple devices will have the same address, such as 0x70 and you are just out of luck in running both of them on the same I2C bus without a lot of jimmy rigging. You can have any combination of 3.3V and 5V I2C busses on this board. What is the solution for this? It’s an I2C controlled 4 I2C bus multiplexer! We have both Grove Connectors and traditional pin headers. Grove connectors make it easy to use with no soldering! SwitchDoc Labs is building all future products with Grove connectors and there are many manufacturers of Grove sensors. And we have the software drivers written for it for the Arduino and the Raspberry Pi on github.com/switchdoclabs. With the software and board, you are ready to go...
  • Camara Lente Gran Angular 2.0mp Esp32 Con Oled 0.96 Ov2640
    Precio:  $5,439.00

    Camara Lente Gran Angular 2.0mp Esp32 Con Oled 0.96 Ov2640

    -Titulo Original : MakerHawk ESP32 Camera Module T-Camera ESP32 WROVER PSRAM Camera Module 4MBytes SPRAM ESP32-WROVER-B OV2640 Camera Module with 0.96 Inch OLED-Fish-Eye Lens-Fabricante : MakerHawk-Descripcion Original: ★ Protocolo: Wi-Fi 802.11 b / g / n Bluetooth 4.2 BLE BR / EDR. Alta sensibilidad y bajo voltaje para aplicaciones integradas. Interfaz estándar SCCB, compatible con la interfaz IIC. ★ Admite formatos de salida RGB (RGB565 / RGB555), GRB422, YUV (422/420) e YCbCr (422). Admite zoom de imagen, configuración de panorámica y ventana. Admite compresión de imagen, puede generar datos de imagen JPEG. Viene con un microprocesador incorporado. ★ Chip principal: esp32 de doble núcleo. Chip de pantalla: SSD1306 I2C. Tipo de pantalla: OLED. Resolución de pantalla: 128x64. Resolución de la cámara: 2 megapíxeles (dos millones). Cámara (modelo de cámara): OV2640. Master Chip: esp32 dual-core Protocol: Wi-Fi 802.11 b/g/n andamp; Bluetooth 4.2 BLE andamp; BR/EDR Flash: 4MBytes SPRAM: 4MBytes Display chip: SSD1306 I2C Display type: OLED Display resolution: 128x64 PIR: AS312 Uart Chip: CP2104 Charging chip: IP5306 I2C Camera: OV2640 Camera Resolution: 2Megapixel Environmental Sensor: BME28...
  • MakerFocus M5Stack ESP32 Módulo de bus oficial para Arduino M5Stack ESP32 Kit de desarrollo de IoT con placa de prototip
    Precio:  $5,769.00

    MakerFocus M5Stack ESP32 Módulo de bus oficial para Arduino M5Stack ESP32 Kit de desarrollo de IoT con placa de prototip

    -Titulo Original : RISC-V AI Camera AIOT(AI+IOT) Dual-core M5Stick-V(Without WiFi) with OmniVision OV7740 Sensor, Speaker and LCD Screen Display for Face Recognition, Logistics Sorting Robot-Fabricante : MAKERFOCUS-Descripcion Original: ★Document: https://drive.google.com/open?id=1QQFv2dBAt8qOTxdpgJyvMpp8EfwABP28; ★ User guide: https://docs.m5stack.com/#/en/quick_start/m5stickv/m5stickv_quick_start; ★MaixPy Links--Web page,Quick Start Guide: https://maixpy.sipeed.com/en/. NOTE: this M5stick V come without WIFI and bluetooth. // ★M5Stack recently launched the new AIOT(AI+IOT) Camera powered by Kendryte K210 -an edge computing system-on-chip(SoC) with dual-core 64bit RISC-V CPU and state-of-art neural network processor. M5stick-V AI Camera features its integration with machine vision capabilities, featuring the unprocessed acceptability to AI Visioning with high energy efficiency and low cost. We co-oped with Sipeed providing the MicroPython environment makes programming onM5stick-V easier. // ★The module comes with the OmniVision OV7740 sensor, using the OmniPixel3-HS technology, providing a best-in-class low light sensitivity, making it ideal for machine vision. In addition to an OV7740 sensor, M5stick-V features more hardware resources such as a speaker with built-in I2S Class-D DAC, IPS screen, 6-axis IMU, 200mAh Li-po battery, and more. // ★More than the visioning, M5stick-V also features the embedded APU - Audio Processor. With its hardware beam-forming support and dual 512-point FFT units, the M5stick-V is also capable of a series of machine hearing works like voice wake-up to speech recognition. // ★Applications/What can M5Stick-V do? -- Face recognition/detection, Object detection/classification, Obtaining size and coordinates of the target in real-time, Obtaining the type of detected target in real-time, Shape recognition, Video/Audio Record/Display, Game simulator. //...
  • Adafruit MPRLS Ported Pressure Sensor Breakout - 0 to 25 PSI
    Precio:  $3,579.00

    Adafruit MPRLS Ported Pressure Sensor Breakout - 0 to 25 PSI

    -Titulo Original : Adafruit MPRLS Ported Pressure Sensor Breakout - 0 to 25 PSI (3965)-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1689 // Stock Type: NeoPixels >> Drivers // In Stock & Ready to Ship // A new collaboration between Adafruit & Micah from Scanlime , we are excited to introduce Fadecandy, a NeoPixel driver with built in dithering, that can be controlled over USB. Fadecandy is not just hardware! It is a kit of both hardware and software parts that make LED art projects easier to build and better-looking so sculptors and makers and multimedia artists can concentrate on beautiful things instead of reinventing the wheel. It's an easy way to get started and an advanced tool for professionals. It's a collection of simple parts that work well together: Firmware that uses unique dithering and color correction algorithms to raise the bar for quality while getting out of the way of your creativity. Open source hardware for connecting cheap and popular WS2811 based LEDs to a laptop, desktop, or Raspberry Pi over USB. Fadecandy Server Software , which communicates with one Fadecandy board or dozens. It runs on Windows, Linux, and Mac OS, and on embedded platforms like Raspberry Pi. The Open Pixel Control protocol, a simple way of getting pixel data from your creative tools into the Fadecandy server. Libraries and examples for popular languages. We have Python and Processing already, with Javascript and Max coming soon. LEDs! Fadecandy works with Adafruit's popular WS2811/WS2812 LEDs. Each controller board supports up to 512 LEDs, arranged as 8 strips of 64 each. Not for use with RGBW NeoPixels, you can only use RGB type at this time.Headers are not included but we have tons of different kinds of dual header in the shop if you want to solder something into the pads. Fadecandy is designed to enable art that is subtle, interactive, and playful - exploring the interplay between light, form, and shadow. If you’re tired of seeing project after project with frenetic blinky rainbow fades, you’ll appreciate how easy it is to create expressiv...
  • Adafruit [3527 PiOLED - 128x32 Monochrome OLED Add-on for...
    Precio:  $3,499.00

    Adafruit [3527 PiOLED - 128x32 Monochrome OLED Add-on for...

    -Titulo Original : Adafruit [3527 PiOLED - 128x32 Monochrome OLED Add-on for Raspberry Pi-Fabricante : ADAFRUIT-Descripcion Original: If you're looking for the most compact li'l display for a Raspberry Pi (most likely a Pi Zero) project, this might be just the thing you need! The Adafruit 128x32 PiOLED is your little OLED pal, ready to snap onto any and all Raspberry Pi computers, to give you a little display. The PiOLED comes with a monochrome 128x32 OLED, with sharp white pixels. The OLED uses only the I2C pins so you have plenty of GPIO connections available for buttons, LEDs, sensors, etc. It's also nice and compact so it will fit into any case. These displays are small, only about 1 diagonal, but very readable due to the high contrast of an OLED display. This screen is made of 128x32 individual white OLED pixels and because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its crispness! Using the display is very easy, we have a Python library for the SSD1306 chipset. Our example code allows you to draw images, text, whatever you like, using the Python imaging library. Our tests showed 30 FPS update rates so you can do animations or simple video. Comes completely pre-assembled and tested so you don't need to do anything but plug it in and install our Python code! Works with any Raspberry Pi computer, including the original Pi 1, B+, Pi 2, Pi 3 and Pi Zero...
  • 100 unidades luces led 5 mm transparentes (luz color azul)
    Precio:  $1,409.00

    100 unidades luces led 5 mm transparentes (luz color azul)

    -Titulo Original : 100 Pieces Clear LED Light Emitting Diodes Bulb LED Lamp, 5 mm (Blue) -Fabricante : eBoot-Descripcion Original: Compatible con Compatible with: Suunto 3 Fitness, Suunto 5, Traverse, Kailash, Spartan Trainer, Ambit 1 2 3 Smartwatch...
  • Adafruit (pid 3213) Assembled Feather Huzzah W/ Esp8266 Wif
    Precio:  $4,179.00

    Adafruit (pid 3213) Assembled Feather Huzzah W/ Esp8266 Wif

    -Titulo Original : Adafruit (PID 3213) Assembled Feather HUZZAH w/ ESP8266 WiFi With Stacking Headers-Fabricante : ADAFRUIT-Descripcion Original: ESP8266 @ 80MHz with 3.3V logic/power 4MB of FLASH (32 MBit) Built in WiFi 802.11 b/g/n // CP2104 USB-Serial converter onboard with 921600 max baudrate for uploading // 9 x GPIO pins - can also be used as I2C and SPI // 3.3V regulator with 500mA peak current output // Measures 2.0" x 0.9" x 0.28" (51mm x 23mm x 8mm) without headers soldered in Light as a (large?) feather - 9.7 grams // Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather HUZZAH ESP8266 - our take on an 'all-in-one' ESP8266 WiFi development board with built in USB and battery charging. Its an ESP8266 WiFi module with all the extras you need, ready to rock! We have other boards in the Feather family, check'em out here. At the Feather HUZZAH's heart is an ESP8266 WiFi microcontroller clocked at 80 MHz and at 3.3V logic. This microcontroller contains a Tensilica chip core as well as a full WiFi stack. You can program the microcontroller using the Arduino IDE for an easy-to-run Internet of Things core. We wired up a USB-Serial chip that an upload code at a blistering 921600 baud for fast development time. It also has auto-reset so no noodling with pins and reset button pressings. To make it easy to use for portable projects, we added a connector for any of our 3.7V Lithium polymer batteries and built in battery charging. You don't need a battery, it will run just fine straight from the micro USB connector. But, if you do have a battery, you can take it on the go, then plug in the USB to recharge. The Feather will automatically switch over to USB power when its available. Here's some handy specs! Auto-reset support for getting into bootload mode before firmware upload 9 x GPIO pins - can also be used as I2C and SPI 1 x analog inputs 1.0V max Built in 100mA LiPoly charger with charging status indicator LED, can also cut a trace to disable the charger Pin #0 red LED for general purpose blinking. Pin #2 blue LED for bootloading debug & general purpose blinking Power/enable pin Comes fully assembled and tested, with a USB interface that lets you quickly use it with the Arduino IDE or NodeMCU Lua. (It comes preprogrammed with the Lua interpreter)...
  • Teensy   2.0
    Precio:  $4,879.00

    Teensy 2.0

    -Titulo Original : Teensy++ 2.0-Fabricante : PJRC-Descripcion Original: 8-Bit AVR Processor (AT90USB1286) // 128K Flash Memory, 8K RAM, 4K EEPROM // USB Can Emulate Any Type of Device // Single Pushbutton Programming // Arduino Compatible // The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy++ breaks out all of the IO available on the AT90USB1286 to breadboard-friendly 0.1 spaced headers so you can hook up a load of peripherals.The Teensy++ comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program the Teensy in your favorite IDE using C you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy!  2 x 0.7 (50.8 x 17.8 mm)8-Bit AVR Processor (AT90USB1286)128K Flash Memory, 8K RAM, 4K EEPROMUSB Can Emulate Any Type of DeviceSingle Pushbutton ProgrammingArduino Compatible8 Analog Inputs46 Digital I/O Pins9 PWM outputsSPI and I2...
  • Makerfocus 2pcs Nrf24l01p+pa+lna Rf Wireless Transmission Mo
    Precio:  $2,479.00

    Makerfocus 2pcs Nrf24l01p+pa+lna Rf Wireless Transmission Mo

    -Titulo Original : MakerFocus 2pcs nRF24L01P+PA+LNA RF Wireless Transmission Module 2.4GHz ML01DP5 22dBm 100mW 2300M Measured Distance SPI Interface with Antenna Anti Theft Anti-Interference-Fabricante : MAKERFOCUS-Descripcion Original: ★Instruction: https://drive.google.com/drive/folders/1Ujn_24yEq7LEECZaUXEs2dlr0RzBdEhK // ML01DP5 is based on original imported nRF24L01P for the worldwide 2.4 - 2.5 GHz ISM band; With a FREE 2.4G SMA Antenna which can measured 2300m, shielding function and low-radiation.Frequency:2.4GHz; Max Power:100mW // Equipped with 20dBm power amplifier chip which makes the transmitting power achieves 100mW (20dBm) while the receiving sensitivity enhanced by 10dB. Those features make the transmitting distance 10 times longer than nRF24L01P itself. // The anti-interference shielding cover on the module makes the anti-interference performance better; This Product has passed CE and ISO9001 Certification. // We Have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation! // Color: Power Supply: 2.0V3.6VDC Communication interface: Standard SPI mode Operating frequency: 2400MHz-2525MHz(1MHz step ) Maximum power: 20dBm (about 100mW) Gbps: 250k,1M,2M, Adjustable Antenna Type: SMA Recommended Measured distance: 2000M(Actual measurement distance: 2300M) Working Humidity: <90% RH Connector:2*4*2.54mm Size:18 * 33.4mm Transmitting Current: 20dBm Operating Temperature: -40℃ ~ +85℃ Storage Temperature: -55℃~ +125℃ Working Humidity: <90% RH Communications levels: 0.7VDD5.2VDC Emission current: 95mA Sinks current: 20mA Transceiver length:single packet: 1—32 bytes, 3 FIFO buffer RSSI support: Only support packet loss statistics Receiving Sensitivity: -106dBm250Kbps -96dbm1Mbps -92dbm2Mbps 2 * nRF24L01P+PA+LNA RF Wireless Transmission Module 2 * Antenn...
  • Adafruit Electret Microphone Amplifier - Max4466 With...
    Precio:  $1,459.00

    Adafruit Electret Microphone Amplifier - Max4466 With...

    -Titulo Original : Adafruit Electret Microphone Amplifier - MAX4466 with Adjustable Gain [ADA1063]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1063 // Stock Type: Sensors >> Sound/Noise // In Stock & Ready to Ship // Add an ear to your project with this well-designed electret microphone amplifier. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. For the amplification, we use the Maxim MAX4466, an op-amp specifically designed for this delicate task! The amplifier has excellent power supply noise rejection, so this amplifier sounds really good and isn't nearly as noisy or scratchy as other mic amp breakouts we've tried! This breakout is best used for projects such as voice changers, audio recording/sampling, and audio-reactive projects that use FFT. On the back, we include a small trimmer pot to adjust the gain. You can set the gain from 25x to 125x. That's down to be about 200mVpp (for normal speaking volume about 6 away) which is good for attaching to something that expects 'line level' input without clipping, or up to about 1Vpp, ideal for reading from a microcontroller ADC. The output is rail-to-rail so if the sounds gets loud, the output can go up to 5Vpp! Using it is simple: connect GND to ground, VCC to 2.4-5VDC. For the best performance, use the quietest supply available (on an Arduino, this would be the 3.3V supply). The audio waveform will come out of the OUT pin. The output will have a DC bias of VCC/2 so when its perfectly quiet, the voltage will be a steady VCC/2 volts (it is DC coupled). If the audio equipment you're using requires AC coupled audio, place a 100uF capacitor between the output pin and the input of your device. If you're connecting to an audio amplifier that has differential inputs or includes decoupling capacitors, the 100uF cap is not required. The output pin is not designed to drive speakers or anything but the smallest in-ear headphones - you'll need an audio amplifier (such as our 3.7W stereo amp) if you want to connect the amp directly to speakers . If you're connecting to a microcontroller pin, you don&...
  • Feetech Fs90r Micro Servo De Rotacion Continua Con Rueda Xs
    Precio:  $4,349.00

    Feetech Fs90r Micro Servo De Rotacion Continua Con Rueda Xs

    -Titulo Original : Geekstory Feetech FS90R 360 Degree Continuous Rotation Micro Servo with RC Wheel Tire (4 Pack) -Fabricante : Geekstory -Descripcion Original: Recibirá 4pcs Feetech 360 grados de rotación continua servo y 4pcs rueda. Este servo de pies tiene certificado CE y ROHS. La velocidad de operación es 110RPM (4.8V), 130RPM (6V), pero puede cambiar el pwm para cambiar la velocidad del servo, para hacerlo más lento o más rápido Servo de par de torsión: 1.3kg.cm/18.09oz.in(4.8V), 1.5kg.cm/20.86oz.in(6V). Esta rueda de plástico negro se ajusta a presión en el eje del engranaje de salida FS90R y es fácil de hacer una buena solución de manejo para robots pequeños...
  • Controlador Arcade para PC Raspberry Pi Android PS2 PS3
    Precio:  $3,749.00

    Controlador Arcade para PC Raspberry Pi Android PS2 PS3

    -Titulo Original : Arcade Controller Zero Delay Encoder PCB Board Arcade DIY Kit Joystick Button 5V Power for PC Raspberry Pi Android PS2 PS3-Fabricante : SJJX-Descripcion Original: Arcade Encoder Board para PC PS2 PS3, controlador DIY Arcade. Incluye conector PS2 y conector USB. Necesita conectar todos los enchufes blancos a la placa. ¡Codificador USB arcade 100% de retardo cero con cable y cables USB que aseguran que las otras partes funcionen perfectamente! Diseño de instalación fácil! Acabo de conectar el botón y el joystick, ¡realmente enchufar y jugar! No dude en contactarnos para obtener las instrucciones detalladas del diagrama de cableado y los manuales para proyectos construidos en Raspberry P...
  • WINGONEER M5Stack ESP32 Módulo de cámara OV2640 Cámara de 2 megapíxeles 1632 1232 UXGA con puerto tipo C y antena 3D WiF
    Precio:  $2,649.00

    WINGONEER M5Stack ESP32 Módulo de cámara OV2640 Cámara de 2 megapíxeles 1632 1232 UXGA con puerto tipo C y antena 3D WiF

    -Titulo Original : WINGONEER® M5Stack ESP32 Camera Module, OV2640 2 Mega Pixels Camera 1632 1232 UXGA, with Type C Port and 3D WiFi Antenna, Mini Camera Board for Arduino, Raspberry Pi 3B/3B+ and Pi 2B B+ IOT DIY-Fabricante : WINGONEER%C2%AE-Descripcion Original: Instruction: IDF development environment, // ESP32 Camera: The ESP32 Camera is a tiny module based on ESP32 chip and OV2640 sensor. You can program it through the ESP-IDF. The board reserved the MPU6050,BME280 and an analog MIC.This module with a IP5306 IC chip and it can be used with lithium battery (Standard voltage: 3.7V4.2V). // The camera is CMOS camera, field of View is 78°,best sensor resolution is 1600 * 1200, maximum rms rate is 15fps SXGA. // OV2640 Sensor 's Parameter:Standard SCCB interface, compatible with I2C interface;Output Formats(8-bit) is YUV(422/420)/YCbCr422; RGB565/555; 8-bit compressed data; 8-/10-bit Raw RGB data; UXGA/SXGA: 15fps; SVGA: 30fps; CIF: 60fps; Scan Mode: Progressive. // For people: Software / hardware product engineers, designers, project contractors, enthusiasts, start-ups, educational groups amd Maker groups. // ESP32 Chip: Dual-core Tensilica LX6 microprocessor Up to 240MHz clock frequency 520kB internal SRAM 4MB Flash memory Integrated 802.11 BGN WiFi transceiver Integrated dual-mode Bluetooth (classic and BLE) Hardware accelerated encryption (AES, SHA2, ECC, RSA-4096) CP2104 USB TTL OV2640 sensor: Standard SCCB interface, compatible with I2C interface Output Formats(8-bit): YUV(422/420)/YCbCr422 RGB565/555 8-bit compressed data 8-/10-bit Raw RGB data Maximum Image Transfer Rate UXGA/SXGA: 15fps SVGA: 30fps CIF: 60fps Scan Mode: Progressive CMOS size: 1/4 Field of View : 78° best sensor resolution: 1600 * 1200 IO voltage: 1.7V-3.3V Analog voltage: 2.5-3.0v (internal LDO powers 1.2V to the core) Power Consumption: TBD Sleep andlt;20μA Temperature Operation: -30°C to 70°C Stable work: 0°C to 50°C Maximum rms rate: 15fps SXGA Sensitivity: 1.3V/(Lux-sec) Signal to noise ratio: 40 dB Dynamic range: 50 dB Scan Mode: Progressive Electronic exposure: Line 1 to Line 1247 Pixel area: 2.2μm x 2.2μm Dark current: 15mV/s at 60°C 1x ESP32 Camera Module, OV2640 2 Mega Pixels Camera 1632 * 1232 UXGA, With Type C Port and 3D WiFi Antenna, Mini Camera Board for Arduino, Raspberry Pi 3B/3B+ and Pi 2B B+ IOT DI...
  • Arduino Robot Kit XIAOR GEEK (78KX3ZL9)
    Precio:  $21,279.00

    Arduino Robot Kit XIAOR GEEK (78KX3ZL9)

    -Titulo Original : XiaoR Geek DS WiFi Smart Robot Car Kit for Arduino UNO R3,Remote Control HD Camera FPV Robotics Learning & Educational Electronic Toy-Fabricante : XIAOR GEEK-Descripcion Original: XiaoR Geek WiFi smart robot car kit is designed for enthusiasts to get hands-on experience about Arduino programming, electronics assembling and robotics knowledge. // APP Control: Automatically self-built signal hot spot after power on, the user just needs to connect smart phone (iOS/Android APP) or PC with the car's signal to control. // Real-time image transmission: The adjustable camera is included with a USB Wi-Fi adapter so you can check the video in a real-time manner on your PC or smart phone. 2-axis pan-and-tilt kit enables the camera to take video at any angle without moving the car. // Graphical programming interface: Support the drag-and-drop graphical programming software, just plug and play, get what you see, easy for the Arduino robot learners. // For better learning: Detailed video tutorial of how to assemble the robot car from scratch and the necessary programs and source codes and circuit graph and learning materials are included. //...
  • SMAKN 5V a 3.3V, 3.3V a 5V Adaptador de módulo convertidor de nivel de UIC 4 vías para Arduino
    Precio:  $1,109.00

    SMAKN 5V a 3.3V, 3.3V a 5V Adaptador de módulo convertidor de nivel de UIC 4 vías para Arduino

    -Titulo Original : SMAKNÂ 5V to 3.3V, 3.3V to 5V IIC Uart Level Converter Module Adapter 4 Way for Arduino-Fabricante : SMAKN-Descripcion Original: Four MOS tube achieve the four road 3 v and 5 v level bidirectional conversion. // Power input tape counter-attack joint protection, integrated 3.3 VLDO, and can provide is not more than 150 mA current. // With power light, work or not be clear at a glance. // Can realize UART, IIC, 1 - wire, SPI bus signals such as bidirectional conversion. // *Four MOS tube achieve the four road 3 v and 5 v level bidirectional conversion. *Power input tape counter-attack joint protection, integrated 3.3 VLDO, and can provide is not more than 150 mA current. *With power light, work or not be clear at a glance. *Can realize UART, IIC, 1 - wire, SPI bus signals such as bidirectional conversion. *Size:16mm*16mm. Feedback: We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help. Our aim is to provide Top Level Customer Service, so we will try our best to solve any problem.Thank you very much...
Mostrar del 1 al 24 (de 147 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]