Arriba

Componentes Electrónicos > Arduino

Mostrar: 
Mostrar del 1 al 24 (de 211 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Adafruit ADS1015 12-Bit ADC - 4 Channel with Programmable...
    Precio:  $1,793.00

    Adafruit ADS1015 12-Bit ADC - 4 Channel with Programmable...

    -Titulo Original : Adafruit ADS1015 12-Bit ADC - 4 Channel with Programmable Gain Amplifier [ADA1083]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1083 // Stock Type: Breakout Boards // In Stock & Ready to Ship // For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1015 provides 12-bit precision at 3300 samples/second over I2C. The chip can be configured as 4 single-ended input channels, or two differential channels. As a nice bonus, it even includes a programmable gain amplifier, up to x16, to help boost up smaller single/differential signals to the full range. We like this ADC because it can run from 2V to 5V power/logic, can measure a large range of signals and its super easy to use. It is a great general purpose 12 bit converter. The chip's fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet. Interfacing is done via I2C. The address can be changed to one of four options (see the datasheet table 5) so you can have up to 4 ADS1015's connected on a single 2-wire I2C bus for 16 single ended inputs. To get you started, we have example code for both the Raspberry Pi ( in our Adafruit Pi Python library ) and Arduino ( in our ADS1X15 Arduino library repository ) Simply connect GND to ground, VDD to your logic power supply, and SCL/SDA to your microcontroller's I2C port and run the example code to start reading data...
  • Adafruit (PID 2423) PiTFT Plus 320x240 2.8 TFT + Capacitive.
    Precio:  $7,166.00

    Adafruit (PID 2423) PiTFT Plus 320x240 2.8 TFT + Capacitive.

    -Titulo Original : Adafruit (PID 2423) PiTFT Plus 320x240 2.8 TFT + Capacitive Touchscreen-Fabricante : ADAFRUIT-Descripcion Original: PiTFT Plus 320x240 2.8" TFT+Touchscreen for Raspberry Pi Zero, Pi3, Pi2 or Model A+, B+ (any Pi with a 2x20 connector) // 320x240 3.5" TFT touchscreen LCD // Custom kernel available at Adafruit // The display uses the hardware SPI pins (SCK, MOSI, MISO, CE0, CE1) as well as GPIO #25 and #24 // Is this not the cutest little display for the Raspberry Pi? It features a 2.8 display with 320x240 16-bit color pixels and a capacitive touch overlay. That's right, instead of a resistive touchscreen, which requires a fingernail or stylus, you can now use a fingerpad. The screen looks much nicer, with a black bezel and glass overlay. If you don't need a capacitive touchscreen, check out the resistive touch version. This updated design fits perfectly onto the Pi Zero, Pi 3, Pi 2 or Model A+, B+! (Any Pi with a 2x20 connector) Not for use with an old Pi 1 with 2x13 connector If you'd like to use a 2.8 display with the original Pi A or Pi B, check out the Model B version. This version also has all 40 pins GPIO pins brought out so you can connect a 40-pin GPIO cable underneath. Now that it's the same outline as a Pi 3/2/B+ it fits well on top of a Pi in our Raspberry Pi Enclosure base and can use our faceplate for a compact touchscreen Pi The display and touchscreen uses the hardware I2C Pins (SDA & SCL), SPI pins (SCK, MOSI, MISO, CE0) as well as GPIO #25 and #24. All other GPIO are unused and you can still share the I2C pins with sensors, LED drivers, etc. Since we had a tiny bit of space, there's 4 slim tactile switches wired to four GPIOs, that you can use if you want to make a basic user interface. For example, you can use one as a power on/off button. Use it for console access or easily pop up X11 onto the PiTFT for a mini monitor, although its rather small at 320x240. Instead, we recommend using PyGame or other SDL-drawing programs to write onto the frame buffer. Raspberry Pi computer and enclosure not included! As of July 22nd, 2015 this display comes fully assembled with tactile switches to...
  • M5Stack StickV K210 AI Cámara Chip de 64 BIT RISC-V MPU6886 con 16M Flash ST7789
    Precio:  $1,333.00

    M5Stack StickV K210 AI Cámara Chip de 64 BIT RISC-V MPU6886 con 16M Flash ST7789

    -Titulo Original : MakerFocus ESP32 Development Board Official Stock Offer Proto Module Proto Board with Extension Bus Socket for Arduino ESP32 Development Kit M5Stack-Fabricante : MAKERFOCUS-Descripcion Original: PROTO board is used as a Core Extensions feature for Arduino ESP32 Development Kit // Expansion board with double-sided 2 * 15 2.54mm busbar // Package Size: 5cm x 5cm x 5cm (1.97in x 1.97in x 1.97in) // Package Weight: 0.1kg (0.22lb.) // Packaging include:1pcs ESP32 Development Board Official Stock Offer Proto Module Proto Board // Color: M5Stack official stockproto board is used as a Core Extensions feature. It's a expansion board with double-sided 2 * 15 2.54mm busbar NW:10g Package Weight: 0.1kg (0.22lb.) Package size: 5cm x 5cm x 5cm (1.97in x 1.97in x 1.97in) Compatibility:All Compatible Model Number:M5Stack Proto Module State of Assembly:Ready-to-Go Package Size: 5cm x 5cm x 5cm (1.97in x 1.97in x 1.97in) 1 * M5Stack Official Stock Prototyping Modul...
  • W65C134SXB - Sistema de desarrollo de ingeniería WDC Xxcelr8r - Placa con la microcomputadora W65C134S de 8 bits
    Precio:  $6,439.00

    W65C134SXB - Sistema de desarrollo de ingeniería WDC Xxcelr8r - Placa con la microcomputadora W65C134S de 8 bits

    -Titulo Original : W65C134SXB - WDC Xxcelr8r Engineering Development System - Board featuring the W65C134S 8-bit Microcomputer-Fabricante : The Western Design Center, Inc.-Descripcion Original: 8-bit 6502 based Microcomputer (3.6864 MHz) on board with WatchDog Timer, 1x UART, IO, Serial Interface Bus // 40 pin XBUS Expansion Connector with Address, Data, and Microprocessor control signals // 3x8 IO Expansion Port Connectors // Serial Interface Bus connectors for Token Passing Local Area Network // Powered by USB (5V) for ease of connection to PC, MAC, Android Smartphone // The W65C134SXB is based around the W65C134S which is a feature rich 8–bit microcomputer based on the W65C02 microprocessor with an advanced (originally designed for life support) Serial Interface Bus (SIB) token passing local area network for multi–W65C134S microcontroller systems. The full external memory bus (8–bit data and 16–bit address bus) allows for flexible system design. This MCU has an embedded debug monitor ROM with computer terminal interface a library of routines that can help you reduce development time and optimized for designing human exo and endo robotic functions, for examples of microcontrollers that can be developed from the W65C134S microcomputer. Designed and Developed in the US...
  • MakerFocus M5Stack COMMU Módulo integrado con 2IIC 1TTL 1CAN 1RS485 Port MCP2515-1 / SO CAN Controller y SP3485EN-L / TR
    Precio:  $8,058.00

    MakerFocus M5Stack COMMU Módulo integrado con 2IIC 1TTL 1CAN 1RS485 Port MCP2515-1 / SO CAN Controller y SP3485EN-L / TR

    -Titulo Original : MakerFocus M5Stack FIRE IoT Kit 240MHz Dual Core ESP32 Development Stackable Kit 4M PSRAM 16M Flash, MPU9250 with 600mAh Lithium Battery Supported Arduino, Blockly Language with UIFlow, Micropython-Fabricante : MAKERFOCUS-Descripcion Original: This is the latest version M5Stack 4M PSRAM 2.0 Version M5stack ESP32 Development Kit.It's a blockly and stackable kit. It integrates esp32 16M flash, MPU6050 MAG3110, support Arduino and MicroPython development and compatible with LE-GO. // Download the code here: https://github.com/m5stack/M5Stack; http://forum.m5stack.com/; Firmware link: https://github.com/EeeeBin/UIFlow-Firmware // The M5Stack ESP32 development kit has been successfully certified by the Microsoft Azure IoT Starter Kit, which connects quickly and securely to the Azure cloud service platform. // Just download the corresponding SDK, you can achieve with the Azure IoT platform docking. For people: Software / hardware product engineers, designers, project contractors, enthusiasts, start-ups, educational groups and Maker groups. // We Have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation! // Color: This is the thelatestversion M5Stack 4M PSRAM Version Development Kit. It's a blockly and stackable kit. It integrates esp32 16M flash, MPU6050 MAG3110, support Arduino and MicroPython development and compatible with LE-GO. Esp32 16M flash MPU6050 MAG3110 4M PSRAM CP2104 3D antenna Type-C USB port 1W Speaker ISP5306 ( I2C) Grove I2C port TF Card port 2 LED BAR Grove (I / O) port Grove URAT port Microphone port Software / hardware product engineers, designers, project contractors, enthusiasts, start-ups, educational groups and Maker groups. 1 * MPU6050 ESP32 Core with 3.7V 600mAh battery 1 * TYPE-C USB Cable 1 * User Manual 1* Allen Ke...
  • Arduino Kit Keyestudio (7q8fq9r7)
    Precio:  $7,377.00

    Arduino Kit Keyestudio (7q8fq9r7)

    -Titulo Original : KEYESTUDIO Easy Plug Super Starter Kit for Arduino/Mixly, Perfect Electronic and Programming Learning kit for Primary, high School and College Students, STEM EDU-Fabricante : KEYESTUDIO-Descripcion Original: KEYESTUDIO EASY Plug Starter Kit includes a compatible Arduino Control Board, 8 piece RJ11 cable, a usb cable and 24 piece popular electronic sensor or actuators. // The controller and modules of this kit have easy-to-connect RJ11 interfaces, making them a perfect alternative to other kits that require complex wiring. // We provide easy and complete Mixly block programming tutorial for this kit, even primary school students without an electronic and programming foundation can quickly learn how to use this kit. // A ideal kit for a class that introduces programming and electronics through fun and engaging interactive projects. // We also have a one-stop store that provides various of open source hardware for arduino, raspberry pi and micro bit, you can access this page at https://www.amazon.com/keyestudio // Mixly is a free open-source graphical Arduino programming software, based on Google’s Blockly graphical programming framework, and developed by Mixly Team@ BNU. It is a free open-source graphical programming tool for creative electronic development; a complete support ecosystem for creative e-education; a stage for maker educators to realize their dreams. Although there is an Ardublock graphical programming software launched by Arduino official, Ardublock is not perfect enough, and many common functions cannot be realized. 1* EASY plug Control Board V2.0 3* EASY plug Digital White LED Module 1* EASY plug Thin-film Pressure Sensor 1* EASY plug Analog Sound Sensor 1* EASY plug Water Level Sensor 1* EASY plug Potentiometer Sensor 1* EASY plug Analog Alcohol Sensor 1* EASY plug LM35 Temperature Sensor Module 1* EASY plug Digital Tilt Sensor Module 1* EASY plug ADXL345 Acceleration Module 1* EASY plug Hall Magnetic Sensor 1* EASY plug DHT11 Temperature and Humidity Sensor 1* EASY plug Digital Push Button 1* EASY plug Reed Switch Module 1* EASY plug Line Tracking Sensor 1* EASY plug Photo Interrupter Module 1* EASY plug Single Relay Module 1* EASY plug Steam Sensor 1* EASY plug Crash Sensor 1* EASY plug 8x8 LED Matrix 1* EASY plug 1602 LCD Module 1* EASY plug 4-digit LED Display 5* 20mm Blue RJ11 Cable 3* 30mm Blue RJ11 Cable 1* USB Cabl...
  • Teensy LC with pins, plus breadboard and usb cable
    Precio:  $3,909.00

    Teensy LC with pins, plus breadboard and usb cable

    -Titulo Original : Teensy LC with pins, plus breadboard and usb cable-Fabricante : SPORTS INTERNET SOLUTIONS LLC-Descripcion Original: Includes Teensy LC with pins, breadboard and USB cable // Teensy-LC delivers an impressive collection of capabilities to make modern electronic projects simpler. It features an ARM Cortex-M0+ processor at 48 MHz, 62K Flash, 8K RAM, 12 bit analog input & output, hardware Serial, SPI & I2C, USB, and a total of 27 I/O pins. Teensy-LC maintains the same form-factor as Teensy 3.2, with most pins offering similar peripheral features...
  • MakerFocus 5pcs M5Stack Grove-T Conector PH2.0 4Pin T Tipo Grove PH2.0-4P Conector T-Header con 3 puertos Compatible con
    Precio:  $1,425.00

    MakerFocus 5pcs M5Stack Grove-T Conector PH2.0 4Pin T Tipo Grove PH2.0-4P Conector T-Header con 3 puertos Compatible con

    -Titulo Original : MakerFocus 5pcs M5Stack Grove-T Connector, PH2.0 4Pin T Type Grove PH2.0-4P T-Header Connector with 3 Ports Compatible with Grove Demoboard for Grove Port Expanding-Fabricante : MAKERFOCUS-Descripcion Original: ★Video: https://www.youtube.com/channel/UCozgFVglWYQXbvTmGyS739w; ★Forum: http://forum.m5stack.com. // Grove-T is a T-shaped hub. Is this remind you the HUB unit ? They are basically the same thing, just in different shape.This is also used for GROVE port expanding. // Notice: Grove-T is just a hardware expander, if you are looking for hardware and software(standard protocol) expander like I2C, Single-bus, please check PaHUB or PbHUB. If you connectted two I2C slave devices onto HUB that share the same adress, you will have problem getting I2C data from both. // For people: Software / hardware product engineers, designers, project contractors, enthusiasts, start-ups and educational groups. // We Have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation! // Accessory Grove-T is a T-shaped hub. Is this remind you the HUB unit ? They are basically the same thing, just in different shape.This is also used for GROVE port expanding. Notice: Grove-T is just a hardware expander, if you are looking for hardware and software(standard protocol) expander like I2C, Single-bus, please check PaHUB or PbHUB. If you connectted two I2C slave devices onto HUB that share the same adress, you will have problem getting I2C data from both. 5 * M5Stack Grove-T Connecto...
  • DaFuRui 120pcs 21cm Multicolor Dupont Wire Breadboard Jumper Wire 40 pines macho a hembra, 40 pines macho a macho, 40 pi
    Precio:  $1,269.00

    DaFuRui 120pcs 21cm Multicolor Dupont Wire Breadboard Jumper Wire 40 pines macho a hembra, 40 pines macho a macho, 40 pi

    -Titulo Original : DaFuRui 120pcs 21cm Multicolored Dupont Wire Breadboard Jumper Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Ribbon Cables Kit Compatible forArduino-Fabricante : DaFuRui-Descripcion Original: ★Dupont wire length: about 21.4 cm/ 8.4 inch (M/ M); 20.7 cm/ 8.1 inch (M/ F); 20 cm/ 7.8 inch (F/ F) // ★11 tiny copper wires inside of single jumper wire,made of high-grade copper wire material for safe and durable to use // ★10 Different Colors, 120units copper cable in total,suitable for arduino breadboard kit project, PCB project, pc motherboard, etc // ★The cables can be separated into single root as you request to do multiple connection // ★Package: 1 x 40-pin male to female jumper wire, 1 x 40-pin male to male jumper wire, 1 x 40-pin female to female jumper wire // Product description: high-grade copper core about 21 cm /8.27 inches Product use: Jumper wire can be used to expand the pin of the test board and increase the experimental project Widely used in electronic projects for connections  You can quickly conduct circuit testing without welding It can be reused if the terminal is not damaged, it can also be used for soldering if damaged Package: 1pcs 40-pin male to female jumper wires 1pcs 40-pin male to male jumper wires 1pcs 40-pin female to female jumper wire...
  • M5StackPSRAM 2.0! FIRE IoT Kit Dual Core ESP32 16M-Flash + 4M-PSRAM Placa de desarrollo MIC / BLE MPU9250 de Micropython
    Precio:  $7,718.00

    M5StackPSRAM 2.0! FIRE IoT Kit Dual Core ESP32 16M-Flash + 4M-PSRAM Placa de desarrollo MIC / BLE MPU9250 de Micropython

    -Titulo Original : M5Stack New PSRAM 2.0! FIRE IoT Kit Dual Core ESP32 16M-Flash+4M-PSRAM Development Board MIC/BLE MPU9250 of Micropython (FIRE)-Fabricante : M5STACK-Descripcion Original: Brand Name:M5Stack Bundle:None Camera Equipped:No State of Assembly:Almost Ready Compatibility:All Compatible Model Number:M5Stack FIRE IoT Starter Kit Flash:16M Flash + 4M PSRAM Input:5V@500mA Interface:Type-C*1, Grove(I2C+I/O+UART), Pogo Pin*1 LCD:2 inch, 320*210 Colorful TFT LCD, ILI9342 Speaker:1W-0928 MIC:MEMS Analog BSBE3729 Microphone LED:SK6812 3535 RGB LED*10 9DOF:MPU6050+MAG3110 Battery:550mAh 3.7V inside Op.Temp:32'F to 104'F (0'C to 40'C...
  • Arduino Uno R3 Kit KOOKYE (1FNT8MFC)
    Precio:  $5,574.00

    Arduino Uno R3 Kit KOOKYE (1FNT8MFC)

    -Titulo Original : KOOKYE Universal Starter Kits for Arduino (UNO R3 Board Included), NodeMCU IoT (ESP8266 WiFi Modules Not Included),Graphical Programming-Fabricante : KOOKYE-Descripcion Original: DETAILED TUTORIAL--This sensor modules in this universal kit not only can be used for arduino( UNO R3 Board Included), but also for raspberry pi and nodemcu esp8266 (Raspberry pi board and nodemcu esp8266 modules not included).You would find the detailed tutorials instruction in our KOOKYE website.Arduino universial kit tutorial:http://kookye.com/?p=1058; NodeMCU ESP8266 wifi kit tutorial:http://kookye.com/?p=3545; // UNIVERSAL ACCESSORIES--You can learn the basic concepts of buttons, resistors, sensors, IR remote control and receivers, how to use sensors to detect environment(i.e. light, temperature), and how to use 74HC595 Shifting Register IC to extend Arduino Digital Ports. // CREATIVE PROJECTS--The kit has 19 projects and 26 items in high quality for the beginners.Every project in this starter kit has detailed circuit graph, step-by-step tutorial and fully-tested Arduino sample codes which can save lots of your research time and speed up your learning progress. // SUPER KITS--This kit walks you through the very basics of using the UNO R3 board in a hands-on way. You'll learn through building several creative projects. Starting from the basics of electronics, to more complex projects, the kit will help you control the physical world with components. // PERFECT FOR BEGINNERS & PROS--This Kit includes the KOOKYE UNO R3 Board (fully compatible with Arduino UNO R3),developed specially for those beginners who are interested in Arduino. You could separately buy a raspberry pi board or nodemcu esp8266 wifi modules separately to continue to learn these universal sensor modules. // 1* KOOKYE UNO R3 Board 24* LED(6* white/Red/Yellow/Green) 1* 8*8 Dot matrix LED display Modules 1* 4-Digit 7 segment LED display modules 1* 1-Digit 7 segment LED display modules 3* Photoressitor Modules 1* Potentionmeter Modules 1* 74HC595 Shifting register 1* I2c display modules(16*2) 1* Stepper Motor+Bridge 1* Piezo Buzzer Modules 1* micro servo motor 1* Tilt Sensor modules 1* DHT11 Humidity sensor modules 1* Temperature sensor modules TMP36 1* Ultrasonic module HC-SR04 1* Obstacle avoidance sensor modules 1* Infrared remote controller and receiver 5* Push buttons 1* Battery snap 1* Acrylic base plate 1* Plastic box 1* Breadboard Resistors: 15* Resistors(200 ohm) 15* Resistors(470 ohm) 15* Resistors(10K ohm) 15* Resistors(1K ohm) Jumper Wires: 49*12cm male-male 4*20cm male-male 4*25cm male-male 8*16cm female-femal...
  • Display Development Tools TFP401 HDMI/DVI Breakout w/touch
    Precio:  $5,225.00

    Display Development Tools TFP401 HDMI/DVI Breakout w/touch

    -Titulo Original : Display Development Tools TFP401 HDMI/DVI Breakout w/touch-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 2219 // Stock Type: LCDs & Displays >> HDMI/DVI Decoders // In Stock & Ready to Ship // It's a mini HDMI decoder board! So small and simple, you can use this board as an all-in-one display driver for TTL displays, or perhaps decoding HDMI/DVI video for some other project. This breakout features the TFP401 for decoding video, and for the touch version, an AR1100 USB resistive touch screen driver.The TFP401 is a beefy DVI/HDMI decoder from TI. It can take unencrypted video and pipe out the raw 24-bit color pixel data - HDCP not supported! It will decode any resolution from 25-165MHz pixel clock, basically up to 1080p. We've used this breakout with 800x480 displays, so we have not specifically tested it with higher resolutions. We added a bunch of supporting circuitry like a backlight driver and configured it for running basic TTL display panels such as the ones we have in the shopYou can even power the display and decoder from a USB port. For example, with a 5 800x480 display and 50mA backlight current, the current draw is 500mA total. You can reduce that down  370mA by running the backlight at half-brightness (25mA). With the backlight off, the decoder and display itself draws 250mA. If you want more backlight control, there's a PWM input, connect that to your microcontroller or other PWM output and you can continuously dim the backlight as desiredWe have two versions, one is video only and one is video+touch. This is the version with touch! Pair it with a screen that has a resistive touch overlay. The USB port then acts as both power and data, with the touch screen appearing like a USB mouse. We've tested it sucessfully on Mac, Windows, and Debian Linux (Raspbian on a Raspberry Pi). Other Linux distributions may or may not work, but if you're running Linux you're probably used to that.This driver is designed specifically as a small and easy to use display driver for our 40-pin TTL displays. In particular, we suggest it for use with single board computers (or desktop/laptops!) w...
  • Arduino Mkr Wan 1300 (lora Connectivity) - Abx00017
    Precio:  $6,016.00

    Arduino Mkr Wan 1300 (lora Connectivity) - Abx00017

    -Titulo Original : Arduino MKR WAN 1300 (LORA Connectivity) - ABX00017-Fabricante : Arduino-Descripcion Original: 1094/5000 Arduino MKR WAN 1300 ha sido diseñado para ofrecer una solución práctica y rentable para los fabricantes que buscan agregar conectividad Lo-Ra a sus proyectos con una mínima experiencia previa en redes. Se basa en el Atmel SAMD21 y un módulo Murata CMWX1ZZABZ Lo-Ra. El diseño incluye la capacidad de alimentar la placa usando dos baterías AA o AAA de 1.5V o 5V externos. El cambio de una fuente a otra se realiza automáticamente. Una buena potencia de cálculo de 32 bits similar a la placa MKR ZERO, el rico conjunto habitual de interfaces de E / S, comunicación Lo-Ra de baja potencia y la facilidad de uso del software Arduino (IDE) para el desarrollo y programación de código. Todas estas características hacen de esta placa la opción preferida para los proyectos emergentes de IoT con baterías en un formato compacto. El puerto USB se puede usar para suministrar energía (5V) a la placa. El Arduino MKR WAN 1300 puede funcionar con o sin las baterías conectadas y tiene un consumo de energía limitado. Advertencia: a diferencia de la mayoría de las placas Arduino y Genuino, la MKR WAN 1300 funciona a 3.3V. El voltaje máximo que los pines de E / S pueden tolerar es 3.3V...
  • Placa De Desarrollo Gowoops Quad-band Gsm Gprs Sim900 Shield Para Arduino Uno
    Precio:  $2,961.00

    Placa De Desarrollo Gowoops Quad-band Gsm Gprs Sim900 Shield Para Arduino Uno

    -Titulo Original : Gowoops Quad-Band GSM GPRS SIM900 Shield Development Board for Arduino Uno-Fabricante : Gowoops-Descripcion Original: ✔ Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world. // ✔ Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands. // ✔ Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal). // ✔ Embedded TCP/UDP stack - allows you to upload data to a web server. // ✔ Industrial Temperature Range - -40°C to +85 °C // GPRS multi-slot class 10/8GPRS mobile station class BCompliant to GSM phase 2/2+Class 4 (2 W @ 850 / 900 MHz)Class 1 (1 W @ 1800 / 1900MHz)RTC supported.Selectable serial port.Speaker and Headphone jacksLow power consumption - 1.5mA(sleep mode)M2M (Machine 2 Machine) ApplicatoionsRemote control of appliancesRemote Weather station or a Wireless Sensor NetworkVehicle Tracking System with a GPS module Make sure your SIM card is unlocked.The product is provided as is without an insulating enclosure. Please observe ESD precautions specially in dry (low humidity) weather.The factory default setting for the GPRS Shield UART is 19200 bps 8-N-1. (Can be changed using AT commands). Power select - select the power supply for GPRS shield(external power or 5v of arduino)Power jack - connected to external 4.8~5VDC power supplyAntenna interface - connected to external antennaSerial port select - select either software serial port or hareware serial port to be connected to GPRS ShieldHardware Serial - D0/D1 of ArduinoSoftware serial - D7/D8 of ArduinoStatus LED - tell whether the power of SIM900 is onNet light - tell the status about SIM900 linking to the netUART of SIM900 - UART pins breakout of SIM900Microphone - to answer the phone callSpeaker - to answer the phone callGPIO,PWM and ADC of SIM900 - GPIO,PWM and ADC pins breakout of SIM900Power key - power up and down for SIM900 1 x GSM GPRS SIM900 Shiel...
  • Cable USB 2.0 A Male to B Male 28/24AWG 1.84mts Monoprice
    Precio:  $937.00

    Cable USB 2.0 A Male to B Male 28/24AWG 1.84mts Monoprice

    -Titulo Original : Monoprice 6-Feet USB 2.0 A Male to B Male 28/24AWG Cable-Fabricante : Monoprice-Descripcion Original: Outer size: about 110×95mm Inner siize:about 60×40mm Fit:Sony MDR-CD350 mdr-cd450 mdr-cd550 Sony mdr-v900 hd mdr-v600 headphones ...
  • Arduino Uno R3 Kit SUNFOUNDER (7PKSWQJQ)
    Precio:  $5,602.00

    Arduino Uno R3 Kit SUNFOUNDER (7PKSWQJQ)

    -Titulo Original : SunFounder Mega 2560 R3 Project Super Starter Kit for Arduino UNO R3 Mega2560 Mega328 Nano,25 Tutorials Included-Fabricante : SUNFOUNDER-Descripcion Original: Super Kit and Affordable Price - This is a complete arduino mega 2560 kit with more than 200pcs components for learners, the most economical way to learn Arduino, electronics and programming with the good price. // Detailed Instructions - With detailed pdf tutorial in the CD, you can learn to code and program faster and easier with all the components. // 25 Projects Provided - As an upgraded Starter kit for arduino mega ,more than 20 interesting lessons are included. Allowing for a dynamic creative learning experience. // Excellent package - A nice plastic packaging box is included for easy and neat storage, being a surprise when you receiving the product. // Professonal Support - Sunfounder customer service team are always willing to solve any question from our customers, please refer to the URL and after-sales service email on the CD if you have any question, it will ultimately aid us in continually improving our products and services. //...
  • Adafruit 4115 Zero4u - 4 Port Usb Hub Without Pogo Pins V1.3
    Precio:  $2,446.00

    Adafruit 4115 Zero4u - 4 Port Usb Hub Without Pogo Pins V1.3

    -Titulo Original : Adafruit 4115 Zero4U - 4 Port USB Hub Without Pogo Pins v1.3-Fabricante : ADAFRUIT-Descripcion Original: Power Mode: Bus-Power / Self-Power // Standards: USB 2.0 and 1.1 compatibility // Working Voltage: 5V DC // Static Current: 1mA // Maximum Output Current: 2A for all ports in self-power mode, 500mA for all ports in bus-power mode // One can never have enough socks, or USB ports. Add some more USB capability to your Raspberry Pi Zero, or any other single-board computer with the Zero4U! This is a 4-port USB 2.0 hub, almost identical to this one, but without the ferrite bead, standoffs or pogo pins. This might be a preferable format if you want to mount it on the bottom or side-by-side or with another HAT below it. It's also great as-is as a small USB hub. Since this version does not have the pogo pins, we recommend using the onboard mini-USB port to the up-stream USB port, which will provide power and data. Or, you can solder to the test pads or use the JST XH2.54 connector on board as the power input port. The blue onboard LED is the power indicator, and will light up when power is connected. Each USB port uses a dedicated white LED as a transaction indicator, and a dedicated electrolytic capacitor to help stabilize the output voltage. Note: This is just the USB hub board...
  • MakerFocus 2pcs NRF24L01 + PA + LNA Transceptor inalámbrico Transceptor RF Módulo 2.4G 1100m con antena en espuma anties
    Precio:  $1,425.00

    MakerFocus 2pcs NRF24L01 + PA + LNA Transceptor inalámbrico Transceptor RF Módulo 2.4G 1100m con antena en espuma anties

    -Titulo Original : MakerFocus 2pcs nRF24L01P+PA+LNA RF Wireless Transmission Module 2.4GHz 22dBm 1100m Measured Distance SPI Interface with PCB Built-in Antenna and IPEX C Antenna Interface for 51 STM8S STM32 Arduino-Fabricante : MAKERFOCUS-Descripcion Original: Wireless Module: It's a 2.4GHz, 100mW, high speed (up to 2Mbps airspeed), high stability, industrial-grade wireless transceiver integrated data transmission module. // The module comes with a high-performance PCB antenna, accurate impedance matching, uses nRF24L01P RF chip, which has higher reliability, more power level, and longer transmission distance and lower power than nRF24L01. // the RFX2401 power amplifier chip is built in, which has a receiving sensitivity of 10dBm and operates in the ISM band of 2.4GHz to 2.5GHz. The module has sufficient transmit power, good spectral characteristics, small harmonics, small channel crosstalk, and ultra-small volume. It is a model of all Murata raw materials and industrial grade standards. // It has a standard spacing of 2.54mm in-line interface and 1.27mm patch interface, which is convenient for users to use with various circuits. // the GT-24 module also comes with an external antenna interface for the ipx carrier, which greatly exerts the free characteristics of the module and gives the user the greatest freedom experience. // Color: It's a 2.4GHz, 100mW, high speed (up to 2Mbps airspeed), high stability, industrial-grade wireless transceiver integrated data transmission module. RF Solution: nRF24L01P Module size: 30.3×14.5mm Working frequency: 2.4GHz ~ 2.525GHz Production Process: environmentally friendly process Interface mode 1*8*1.27mm/2*4*2.54mm(The patch can also be used by using the universal board and the DuPont line) Communication level: 0.7VCC ~3.3V (supply voltage) Measured distance: 1100m (Clear air, maximum power, altitude 2m, 250k airspeed) Transmit power: 4 levels adjustable up to 20dBm (About 100mW at maximum power) Air rate: 250k ~ 2Mbps Shutdown current: About 30uA Emission current:About 90mA(Power supply capacity must be greater than 250mA) Receiving current: About 20mA Antenna form: PCB antenna / ipex c Communication Interface: SPI Launch length / Receiving length: Single packet 1~32 bytes RSSI support: not support Receiving sensitivity: -94dBm250kbp Operating temperature: -40 ~ +85℃ Working humidity: 10% ~ 90% Storage temperature: -40 ~ +125℃ 2 * 2.4G nRF24L01P+PA+LNA RF Wireless Transmission Modul...
  • Teensy 3.5 - 120 Mhz Arm Cortex-m4 - Chip Mk64fx512vmd12
    Precio:  $3,799.00

    Teensy 3.5 - 120 Mhz Arm Cortex-m4 - Chip Mk64fx512vmd12

    -Titulo Original : Teensy 3.5-Fabricante : PJRC-Descripcion Original: 120 MHz ARM Cortex-M4 with Floating Point Unit // 512K Flash, 192K RAM, 4K EEPROM // Microcontroller Chip MK64FX512VMD12 // 120 MHz ARM Cortex-M4 with Floating Point Unit 512K Flash, 192K RAM, 4K EEPROM Microcontroller Chip MK64FX512VMD12 1 CAN Bus Port 16 General Purpose DMA Channels 5 Volt Tolerance On All Digital I/O Pins 62 I/O Pins (42 breadboard friendly) 25 Analog Inputs to 2 ADCs with 13 bits resolution 2 Analog Outputs (DACs) with 12 bit resolution 20 PWM Outputs USB Full Speed (12 Mbit/sec) Port Ethernet mac, capable of full 100 Mbit/sec speed Native (4 bit SDIO) micro SD card port I2S Audio Port, 4 Channel Digital Audio Input & Output 14 Hardware Timers Cryptographic Acceleration Unit Random Number Generator CRC Computation Unit 6 Serial Ports (2 with FIFO & Fast Baud Rates) 3 SPI Ports (1 with FIFO) 3 I2C Ports Real Time Cloc...
  • Geewin Esp32-cam Camara Wifi + Modulo Bluetooth Cpu De Doble Nucleo De 32 Bits Placa De Desarrollo Psram 4m Con Camara O
    Precio:  $1,977.00

    Geewin Esp32-cam Camara Wifi + Modulo Bluetooth Cpu De Doble Nucleo De 32 Bits Placa De Desarrollo Psram 4m Con Camara O

    -Titulo Original : GeeWin ESP32-CAM Camera WiFi + Bluetooth Module Dual-core 32-bit CPU 4M PSRAM Development Board with OV2640 2MP Camera + FT232RL FTDI USB to TTL Serial Converter + Jumper Wire for Wireless Monitoring-Fabricante : GEEWIN-Descripcion Original: 【ESP32-CAM】Low-power dual-core 32-bit CPU for application processors; Extremely small 802.11b / g / n Wi-Fi + BT / BLE SoC module. // 【FT232RL Converter 】Chip: FT232RL; Working Voltage: 3.3V/5.5V; It make your work easier by using an FTDI programmer connect the ESP32-CAM board to your computer. // 【20CM Jumper Wires】This set contains 20cm 40pin Female to Female Jumper Wires, with which you can easier to complete the project. // 【Competible with】Our ESP32-CAM supports inter99faces such as UART / SPI / I2C / PWM / ADC / DAC; Supports OV2640 and OV7670 cameras. // 【Widely Application】Our ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals, and other IoT applications. It is an ideal solution for IoT applications. // - IO Port: 9 - SPI Flash: Default 32Mbit - Power Supply Range: 5V 2A - WiFi: 820.11 b/g/n/e/i - Spectrum Range: 2412-2484MHZ - Support TF Card: Maximum 4G - Support Interface: UART/SPI/I2C/PWM - Serial Port Rate: Default 115200 bps - RAM: Internal 520KB + External 4M PSRAM - Bluetooth: Bluetooth 4.3 BR/EDR and BLE standard - Antenna Form: Onboard PCB antenna, gain 2dBi - Image Output Format: JPEG (Only OV2640 support), BMP, GRAYSCALE - Transmit Power: 820.11b: 17±2dBm (@11Mbps); 820.11g: 14±2dBm (@54Mbps); 820.11n: 13±2dBm (@MCS7) - Safety: WPA/WPA2/WPA2-Enterprise/WPS -Pitch: 2.54mm -Interface: Mini USB -Operating Voltage: 3.3V and 5V -Chip: FT232RL, not genuine FTDI chip -Pin definition: DTR, RXD, TX, VCC, CTS, GND -XD/TXD transceiver communication indicator -Support: Win95/98/98se/ME/2000/XP/win7 32bit 64bit /Vsita/, Do not Support Win8 -Pitch: 2.54mm -Cable length: 20CM -Material: high-grade copper wire -Type: Female-Female 1 x ESP32 WiFi + Bluetooth Module 1 x OV2640 Camera 1 x FTDI USB To TTL Serial Converter 1 x 20cm 40Pin Female to Female Jumper Wire...
  • Adafruit USB Cable with Switch [ADA1620]
    Precio:  $1,443.00

    Adafruit USB Cable with Switch [ADA1620]

    -Titulo Original : Adafruit USB Cable with Switch [ADA1620]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1620 // Stock Type: Cables >> USB Cables // In Stock & Ready to Ship // Add a power switch to any USB-powered project simply by plugging this between the USB power port and the USB cable. This is the most useful thing you never knew you needed! You'll want to pick up a bunch for your electronic projects. Comes with a USB A socket on one end and a USB A plug on the other. In between is an in-line switch that is rated for 2 Amps. - this is a ground/5V power switch only! The switch is on the positive 5V line. A great match for our USB wall adapters or battery packs. If you have a device that uses the data lines to set the charge rate, this switch may not work, we use it for adding a 'hard power switch' to a Raspberry Pi. USB Cable with Switch ( 0:22 ...
  • Adafruit Perma Proto Bonnet Mini Kit [ADA3203]
    Precio:  $1,434.00

    Adafruit Perma Proto Bonnet Mini Kit [ADA3203]

    -Titulo Original : Adafruit Perma Proto Bonnet Mini Kit [ADA3203]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 3203 // Stock Type: Raspberry Pi >> Pi HATs & Plates >> Bonnets // In Stock & Ready to Ship // Design your own Bonnet or pHAT, attach custom circuitry and otherwise dress your Pi Zero with this jaunty prototyping Bonnet kit!To add to the Adafruit Bonnet party , we have this Perma-Proto inspired plug in daughter board. It has a grid of 0.1 prototyping soldering holes for attaching chips, resistors, LED, potentiometers and more. The holes are connected underneath with traces to mimic the solderless breadboards with which you're familiar. There's also long power strips for +3V, +5V and Ground connections to the Pi. Near the top we break out nearly every pin you could want to connect to the Pi (#26 didn't quite make the cut).The Perma-Proto Bonnet comes with a printed circuit board and a single  2x20 GPIO Header for Raspberry Pi  to put your Perma-Proto on top of your Raspberry Pi Zero (like a nice little bonnet...). Unlike our  Perma-Proto HATs , this design does not include an EEPROM, so you can 'stack' it with other Bonnets and pHATs without worrying about an EEPROM address collision.You can customize your Perma-Proto setup using a  standard 2x20 stacking header  or  extra tall 2x20 stacking header . You can also swap out the 2x20 header with  a slim 2x20 type if you want it to sit closer to the Pi , or  an extra tall one if you want it to sit above the USB/Ethernet ports .A bit of light soldering is required to attach the header to the PCB but it's easy work. This bonnet is designed for use with Raspberry Pi Zero but you can put on top of any Raspberry Pi with a 2x20 connector, it will just not stick out as far.  We also offer a full 'HAT' sized version for Pi A+, B+, Pi 2 & 3. Raspberry Pi Zero not included...
  • WINGONEERUSB Módulo USB Host / HID con salida de int (PRR4)
    Precio:  $2,676.00

    WINGONEERUSB Módulo USB Host / HID con salida de int (PRR4)

    -Titulo Original : WINGONEER New USB Module USB Host/HID with MAX3421E SPI Interface Output5 Input5 Compatible with ESP32 Stackable Kit-Fabricante : WINGONEER®-Descripcion Original: USB is a USB driver module which integrates MAX3421E(USB peripheral/host controller). // SPI Interface: data rate Up to 26MHz 8-way general purpose input output(GPIO) Built in lithium battery socket // USB keylogger Read and write U disk using Core // USB is a USB driver module which integrates MAX3421E(USB peripheral/host controller). USB keylogger Read and write U disk using Core SPI Interface: data rate Up to 26MHz 8-way general purpose input output(GPIO) Built in lithium battery socket 1x New USB Modul...
  • Cable De Extensión Tnp Usb 3.0 (6 Pies) - Superespecial Usb 3.0 Tipo A Extensor Macho A Hembra M / F Adaptador De Conect
    Precio:  $1,471.00

    Cable De Extensión Tnp Usb 3.0 (6 Pies) - Superespecial Usb 3.0 Tipo A Extensor Macho A Hembra M / F Adaptador De Conect

    -Titulo Original : TNP USB 3.0 Extension Cable (6 Feet) - Superspeed USB 3.0 Type A Male to Female Extender M/F Bi-Directional Connector Adapter Wire Cord Plug Jack for Data Transfer Sync & Charge - Black-Fabricante : TNP Products-Descripcion Original: High performance USB 3.0 extension cable extends the connection between a computer, desktop, laptop, Windows surface pro tablet, Mac, iMac, Macbook, video projector, video bean, iPhone, iPad, cellphone, Android smartphone, TV, Xbox One, Xbox 360, PS4, PS3, gaming headset, car stereo, USB wifi adapter, etc... and both USB 3.0 and USB 2.0 peripherals including hard drive, USB hub, wired & wireless mouse, keyboard, webcam, camera, flash drive, printer, and more // Enjoy SuperSpeed USB 3.0 data transfer rate at up to 5 Gbps, 10x faster than USB 2.0; Upgrade to SuperSpeed USB 3.0 and future-proof your data transfer rate while maintain backwards compatibility with your existing USB 2.0 devices // Plug-n-play, no driver installation required; Compatible with Windows PC desktop, laptop, Windows, Mac OSX, HP Canon Dell Epson Brother printer; portable USB 3.0 external hard drives including Toshiba Canvio, Seagate FreeAgent, and Western Digital (WD) My Passport and Elements hard drives // Thick gauge wiring and reduced cable resistance enable fast charge speed via any USB charger; extend the distance length for charging your iPhone, iPad, iPod and other devices // Premium USB 3.0 repeater cable engineered with molded strain relief connectors for durability and grip treads for easy plugging and unplugging; Combine with bare copper conductors, and braid shielding provides superior cable performance and error-free data transmission // Size Name: USB 3.0 is the third major version of the Universal Serial Bus (USB) standard for interfacing computers and electronic devices. USB 3.0 has transmission speeds of up to 5 Gbit/s, which is about ten times faster than USB 2.0 (480 Mbit/s). The superspeed USB 3.0 extension cable is an indispensable accessory for PC and Mac users to bring USB peripherals such as hard drives, printers, mice, keyboards, and USB hubs within reach from behind the desk or across the room. SuperSpeed USB 3.0 delivers 10x the data transfer rate of Hi-Speed USB 2.0 at up to 5 Gbps. Connector 1: USB 3.0 Type A MaleConnector 2: USB 3.0 Type A FemaleColor: BlackLength: 6 FT / 1.8MConnectors: Type A to Type A (M / F)NOTE: Some of the devices might NOT support cable's charging function by the factory setting. Please refer to the user manual for details1x USB 3.0 Extension Cable (6 Feet) - Superspeed USB 3.0 Type A Male to Female Extender M/F Bi-Directional Connector Adapter Wire Cord Plug Jack for Data Transfer Sync & Charge - Blac...
Mostrar del 1 al 24 (de 211 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]