Arriba

Componentes Electrónicos > Arduino

Mostrar: 
Mostrar del 1 al 24 (de 249 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Adafruit Board Edge Mounting Kit - Pack of 4 [ADA1116]
    Precio:  $1,517.00

    Adafruit Board Edge Mounting Kit - Pack of 4 [ADA1116]

    -Titulo Original : Adafruit Board Edge Mounting Kit - Pack of 4 [ADA1116]-Fabricante : ADAFRUIT-Descripcion Original: Adafruit Part Number: 1116 // Stock Type: Raspberry Pi >> Raspberry Pi Model A & B >> Prototyping // In Stock & Ready to Ship // Having difficulty attaching a PCB? This kit is especially useful when there are no mounting holes - as with the original Raspberry Pi. Instead of gluing, taping, epoxying, etc. use these elegant standoffs. They have these round hook things that are designed to grip standard 0.062 thickness PCBs either by the edge or by the corner. Comes in a pack of 4 with matching #6 thread forming screws. Ideal for use with up to 1/8 mounting material. We have these as part of the Pi Dish kit and they work really well...
  • HiLetgo ESP-WROOM-32 ESP32 ESP-32S Placa de desarroll (4J7N)
    Precio:  $2,161.00

    HiLetgo ESP-WROOM-32 ESP32 ESP-32S Placa de desarroll (4J7N)

    -Titulo Original : ESP32 Camera Module(Arduino Camera, Raspberry Pi Camera), OV2640 2 Mega Pixels Camera, with Type C Port and 3D WiFi Antenna, Mini Camera Board for Arduino, Raspberry Pi 3B/3B+ and Pi 2B+ IOT DIY-Fabricante : MAKERFOCUS-Descripcion Original: ★User Guide: https://docs.m5stack.com/#/en/quick_start/m5camera/m5camera_quick_start; ★IDF development environment, ★Demo: github.com/m5stack/esp32-cam-demo; ★Datasheet:https://github.com/m5stack/esp32-cam-demo/blob/m5cam/M5CAM-ESP32-A1-POWER.pdfMPU6050. // ★M5Stack ESP32 Camera: The M5Stack ESP32 Camera is a tiny module based on ESP32 chip and OV2640 sensor. You can program it through the ESP-IDF. The board reserved the MPU6050,BME280 and an analog MIC.This module with a IP5306 IC chip and it can be used with lithium battery (Standard voltage: 3.7V4.2V). // ★OV2640 Camera Module: The camera is CMOS camera, CMOS size: 1/4", field of view : 65 degree, maxmium Pixel: 200M pixels (Because of the small RAM, the board can’t obtain it. It can output images up to 800*600 JPEG.) // ★OV2640 Sensor​​​​​​'s Parameter:Standard SCCB interface, compatible with I2C interface;Output Formats(8-bit) is YUV(422/420)/YCbCr422; RGB565/555; 8-bit compressed data; 8-/10-bit Raw RGB data; UXGA/SXGA: 15fps; SVGA: 30fps; CIF: 60fps; Scan Mode: Progressive. // ★For people: Software / hardware product engineers, designers, project contractors, enthusiasts, start-ups, educational groups amd Maker groups. // Color: Dual-core Tensilica LX6 microprocessor Up to 240MHz clock frequency 520kB internal SRAM 4MB Flash memory Integrated 802.11 BGN WiFi transceiver Integrated dual-mode Bluetooth (classic and BLE) Hardware accelerated encryption (AES, SHA2, ECC, RSA-4096) CP2104 USB TTL Standard SCCB interface, compatible with I2C interface Output Formats(8-bit): YUV(422/420)/YCbCr422 RGB565/555 8-bit compressed data 8-/10-bit Raw RGB data Maximum Image Transfer Rate UXGA/SXGA: 15fps SVGA: 30fps CIF: 60fps Scan Mode: Progressive CMOS size: 1/4 Field of View : 78° best sensor resolution: 1600 * 1200 IO voltage: 1.7V-3.3V Analog voltage: 2.5-3.0v (internal LDO powers 1.2V to the core) Power Consumption: TBD Sleep andlt;20μA Temperature Operation: -30°C to 70°C Stable work: 0°C to 50°C Maximum rms rate: 15fps SXGA Sensitivity: 1.3V/(Lux-sec) Signal to noise ratio: 40 dB Dynamic range: 50 dB Scan Mode: Progressive Electronic exposure: Line 1 to Line 1247 Pixel area: 2.2μm x 2.2μm Dark current: 15mV/s at 60°C 1 * EESP32 Module Development Board with OV2640 Camer...
  • ADAFRUIT Industries 954 USB-to-TTL Serial Cable, Raspberry..
    Precio:  $2,262.00

    ADAFRUIT Industries 954 USB-to-TTL Serial Cable, Raspberry..

    -Titulo Original : ADAFRUIT Industries 954 USB-to-TTL Serial Cable, Raspberry PI (1 Piece)-Fabricante : ADAFRUIT-Descripcion Original: Compatible with Windows XP/Vista/7/8 and MacOS X 10.6 to 10.10 // SiLabs CP2012 chipset // Ideal for easy debugging of Raspberry Pi and BeagleBone Black // USB to TTL Serial Cable // Pinout: Red 5V, Black 0V (Ground), White RX, Green TX // This cable is an easy way to connect a Raspberry Pi, BeagleBone Black, a microcontroller, or other TTL serial device to your computer. This makes the cable ideal for interfacing with debugging and programming consoles of various devices. This can even be used to install alternate operating systems on some WiFi routers. This devices uses the PL2303TA chipset and is compatible with Windows 8! There are also drivers available for Windows XP/Vista/7/8 and MacOS X 10.6 to 10.10...
  • Módulo GPS WINGONEER M5Stack ESP32 Módulo GPS NEO M8N incorporado con interfaz MCX y antena GPS IoT apilable incluido pa
    Precio:  $5,160.00

    Módulo GPS WINGONEER M5Stack ESP32 Módulo GPS NEO M8N incorporado con interfaz MCX y antena GPS IoT apilable incluido pa

    -Titulo Original : WINGONEER M5Stack ESP32 GPS Module Built-in NEO M8N GPS Module with MCX Interface and GPS Antenna Included, Stackable IoT for Arduino ESP32-Fabricante : WINGONEER®-Descripcion Original: New Serials:This is a ESP32 NEO M8N GPS module and it's a stackable IoT mudule. // Component: It built-in NEO M8N GPS Module and MCX Interface, including a GPS Antenna. // For people:Software / hardware product engineers, designers, project contractors, enthusiasts, start-ups and educational groups. // The ESP32 development kit has been successfully certified by the Microsoft Azure IoT Starter Kit, which connects quickly and securely to the Azure cloud service platform. // The ESP32 development kit has been successfully certified by the Microsoft Azure IoT Starter Kit, which connects quickly and securely to the Azure cloud service platform. This is a ESP32 NEO M8N GPS module, it has internal and external antenna MCX interface and it's a stackable IoT mudule. Software / hardware product engineers, designers, project contractors, enthusiasts, start-ups and educational groups. Weight: 39.79g GPS Antenna: Frequency: 1575.42MHZ Voltage:2.7~5.0V 1 * ESP32 GPS Module Built-in NEO M8N GPS Module 1 * GPS Antenn...
  • Interruptor de láminas Gikfun abierto Interruptor de inducción magnética para Arduino (paquete de 10 piezas) EK1621
    Precio:  $864.00

    Interruptor de láminas Gikfun abierto Interruptor de inducción magnética para Arduino (paquete de 10 piezas) EK1621

    -Titulo Original : Gikfun Reed switch open Magnetic Induction Switch for Arduino (Pack of 10pcs) EK1621-Fabricante : Esooho-Descripcion Original: 10pcs Reed switch MagSwitch 2 * 14mm Normally open Magnetic induction switch //...
  • Arduino Uno R3 Kit BONATECH (7D58C2WC)
    Precio:  $5,841.00

    Arduino Uno R3 Kit BONATECH (7D58C2WC)

    -Titulo Original : BONATECH Arduino UNO R3 Starter Kit with Original UNO R3 Development Board Learning Basic DIY Kit-Fabricante : BONATECH-Descripcion Original: 1pcs UNO R3 official genuine 1 USB cable 1pcs HC-SR04 ultrasonic sensor 4pin HC-SR501 PIR Motion Sensor Module 1 pcs30 jumper 1 pcs 830 BREADBOARD 30pcs led (red, green, yellow) 40pcs resistance (220R, 330R, 10K, 1K) 1pcs 10-pin DuPont line (male& female) 1pcs potentiometer 1pcs activity buzzer 1pcs passive buzzer 1pcs 74HC595N 1pcs infrared receiver 1pcs LM35DZ 1pcs flame sensor 2pcs ball switches 3pcs of 5mm LDR 5pcs button switch with cover 1pcs infrared remote controller 1pcs digital tube 1pcs four-digit digital tube 1pcs 8 * 8 dot tube 1pcs UNL2003 driver board 1pcs 5V stepper motor 1pcs SG90 1pcs LCD1602 IIC I2C 1 PS2 game joystick module 1 pcs DHT11 temperature and humidity sensor module 1pcs water level measurement module 1pcsRFID module 1pcs RFID key ring 1pcs RFID card 1pcs sound sensor module 1pcs way relay module 1pcsRTC module 1pcs 16-key matrix keyboard module 1pcs 2.54mm 40pin connector 1pcs 9V battery clip Your satisfaction is our priority. So we would deliver the highest quality products and services to meet your satisfaction...
  • Arduino Uno R3 Kit CREATION CRATE (7RB2VZP6)
    Precio:  $39,274.00

    Arduino Uno R3 Kit CREATION CRATE (7RB2VZP6)

    -Titulo Original : Arduino Starter Kit |12 Electronic Projects | Learn Circuits, Electronics, Coding | Includes 12 Online Courses, Arduino UNO R3, All Needed Components | Canadian Subscription Box of The Year-Fabricante : CREATION CRATE-Descripcion Original: Learning by doing is 15X more effective than traditional schooling. In this 12 project kit, Creation Crate combines hands-on electronic projects with online courses to teach kids, teens, and adults electronics and coding. Parent and Teacher Choice Award Winner. Canadian Subscription Box Of The Year. Authenticated By STEM.org. Used in over 65+ countries. // Includes Arduino Uno (1), Breadboard (2), Servo Motor (2), LCD Screen (1), Load Cell Sensor With Wires (1), Caps (24), Push Buttons (24), Microphone Module (1), Accelerometer (1), Pressure Sensor (1), Mounting Squares (10), Ultrasonic Sensor (1), DHT11 Sensor (1), BMP180 Sensor (1), 9V Batter (2), LED Matrix (3), Wire Bundle (105pcs), Resistor Bundle (25pcs), ohm Resistors (50pcs), LEDs (125pcs), LDR (5pcs), Potentiometer (4pcs), Buzzer (2pcs), Matrix Keypad (1), USB Cable (2), Base Plate (1) // Receive access to 12 online courses that will include easy to follow step by step instructions, in depth video tutorials, time saving lessons on coding, an overview of common errors, and excercises to challenge your knowledge of the new lesson learned. // Each electronic project in this 12 project progression becomes more challenging and builds on the lessons learned from the prior course. By the end of the project progression you will know how to build and program a Mood Lamp, Memory Game, Distance Detector, LED Dice Game, Optical Theremin, 2 Player Reflex Game, Weather Station, Audio Visualizer, Lock Box, Digital Multimeter, Handheld Balance Game, Strength Gauge. // Creation Crate is an education packed arduino starter kit for anyone ages 12+ that wants to learn electronics and coding. Perfect for any situation! Start a stem club, give a stem gift filled with tinkering toys, have an easy diy electronics kit handy for when you are feeling inspired. Help your child explore the possibilities of technology. The choice is yours, we are just here to make it the best experience ever. // Learning by doing is 15X more effective than traditional schooling.We created a better way to learn electronics and coding by combining hands-on projects with online courses. We send you an UNO R3 (arduino compatible) and all the needed components to build an electronic project.Each project comes with access to an online classroom that includes step by step instructions, video tutorials, common errors, and excercises/challenges.Projects become progressively more challenging as you learn new concepts. We grew up as the kids in class that would ask why are we learning this?. So we created a learning experience that starts with why!Each project shows you how to use an UNO R3, components, and lines of code to solve real world problems.You will develop strengths inElectronics Coding (C++)CircuitsProblem SolvingCritical Thinking Ages 12 - 100STEM Clubs who want an easy way to teach and learn electronics and codingAdult Hobbyists who want a handy electronics kitStudents studying computer science, engineering, and other STEM topicsTeens interested in robotics and codingParents who want to help their child reach their full potentialGift givers looking for fun and educational STEM tinkering toys Mood LampMemory GameDistance DetectorLED Dice GameOptical Theremin2 Player Reflex GameWeather StationAudio VisualizerLock Box, Digital MultimeterHandheld Balance GameStrength Gaug...
  • Hiletgo Esp32 Lora Sx1278 0.96inch Oled + Antena 433/470mhz
    Precio:  $3,569.00

    Hiletgo Esp32 Lora Sx1278 0.96inch Oled + Antena 433/470mhz

    -Titulo Original : HiLetgo ESP32 LoRa SX1278 0.96 inch OLED Display Development Board WIFI Bluetooth Dual Core 240MHz CP2102 and 433/470MHz Antenna for Arduino Smart WIFI LoRa 32-Fabricante : HiLetgo-Descripcion Original: Specification: Operating voltage: 3.3V to 7V Operating temperature range: -40 ° C to + 90 ° C Supports Sniffer, Station, softAP and Wi-Fi Direct modes Data rate: 150 Mbps 11n HT40,72 Mbps 11n HT20,54 Mbps 11g, 11 Mbps 11b Transmit power: 19.5 dBm 11b, 16.5 dBm 11g, 15.5 dBm 11n Receiver sensitivity up to - 139 dBm UDP continues to throughput by 135 Mbps Package Including: 1 * WIFI LoRa 32 Development Board with OLED 1 * 433/470MHz Antenna 1 * Pin sticker 2 * Pin header...
  • Teensy Prop Shield Low Cost (no Motion Sensors)
    Precio:  $1,922.00

    Teensy Prop Shield Low Cost (no Motion Sensors)

    -Titulo Original : Teensy Prop Shield Low Cost (no Motion Sensors)-Fabricante : TEENSY-Descripcion Original: This low-cost Prop Shield is meant for making light and sound effects on small handheld props and wearable costumes. Audio Amplifier - Clear quality audio output to a small speaker. Fast LED Driver - Drive APA102 / Dotstar LEDs for colorful lighting with rapid response. Flash Memory - 8 Mbyte storage for images, sound clips, and data logging. This shield features a 2 watt audio amp, high speed 5V buffers for driving APA102 LEDs, and an 8 Mbyte flash memory for images, sound clips, or data logging. It's approximately the size of a Teensy, just slightly longer to allow space for mounting holes and connections for power, speaker, and LEDs. This lower cost Prop Shield is identical to the standard Prop Shield, except the motion sensors are removed...
  • M5stack Esp32 Basic Core Kit De Desarrollo Micro Control Extensible Wifi Ble Iot Prototype Board Para Arduino (basic) ..
    Precio:  $4,783.00

    M5stack Esp32 Basic Core Kit De Desarrollo Micro Control Extensible Wifi Ble Iot Prototype Board Para Arduino (basic) ..

    -Titulo Original : M5Stack ESP32 Basic Core Development Kit Extensible Micro Control WiFi BLE IoT Prototype Board for Arduino (Basic) …-Fabricante : M5STACK-Descripcion Original: Description: 1. Using ESP32 Chip. Compatible with Wi-Fi & Blurtooth features. 2. With 2.0 Inch 320x240 Colorful TFT LCD, 1W Speaker and high performance 3D antenna. 3. The bottom base integrates 150mAh Lithium battery, bus I/O extension and magnet adsorption. Shipping Method: Default to use epacket Parcel (Above $190 will use DHL/ FedEx/ UPS) Handle Time: Orders will be shipped out within 48 hours in business day. Delivery Time: It generally takes 5-15 business days to deliver packages to most destinations. In peak reason, there could be 5-15 days delay. Package Included: Core*1 Battery Bottom*1 Type-c Cable*1 Dupont Cable*10 User Manual*1 Sticker*...
  • DaFuRui 120pcs 21cm Multicolor Dupont Wire Breadboard Jumper Wire 40 pines macho a hembra, 40 pines macho a macho, 40 pi
    Precio:  $1,140.00

    DaFuRui 120pcs 21cm Multicolor Dupont Wire Breadboard Jumper Wire 40 pines macho a hembra, 40 pines macho a macho, 40 pi

    -Titulo Original : DaFuRui 120pcs 21cm Multicolored Dupont Wire Breadboard Jumper Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Ribbon Cables Kit Compatible forArduino-Fabricante : DaFuRui-Descripcion Original: ★Dupont wire length: about 21.4 cm/ 8.4 inch (M/ M); 20.7 cm/ 8.1 inch (M/ F); 20 cm/ 7.8 inch (F/ F) // ★11 tiny copper wires inside of single jumper wire,made of high-grade copper wire material for safe and durable to use // ★10 Different Colors, 120units copper cable in total,suitable for arduino breadboard kit project, PCB project, pc motherboard, etc // ★The cables can be separated into single root as you request to do multiple connection // ★Package: 1 x 40-pin male to female jumper wire, 1 x 40-pin male to male jumper wire, 1 x 40-pin female to female jumper wire // Product description: high-grade copper core about 21 cm /8.27 inches Product use: Jumper wire can be used to expand the pin of the test board and increase the experimental project Widely used in electronic projects for connections  You can quickly conduct circuit testing without welding It can be reused if the terminal is not damaged, it can also be used for soldering if damaged Package: 1pcs 40-pin male to female jumper wires 1pcs 40-pin male to male jumper wires 1pcs 40-pin female to female jumper wire...
  • Arduino Robot Kit DFROBOT (7QFYHQ6Z)
    Precio:  $10,110.00

    Arduino Robot Kit DFROBOT (7QFYHQ6Z)

    -Titulo Original : DFRobot Gravity: Starter Kit for Arduino (KIT0111)-Fabricante : DFROBOT-Descripcion Original: Gravity Arduino Starter kit  is a plug&play electronics toolkit that provides Arduino beginners and makers with the easiest experience of learning and playing with the Arduino platform. // Gravity Starter Kit includes a DFRduino UNO R3 microcontroller, which functions exactly the same as Arduino UNO, and 12 most popular and interesting electric components and sensors // With the IO expansion shield, sensors can be connected directly onto the board without jumper wires or bread board // Gravity Arduino Starter kit  is a plug&play electronics toolkit that provides Arduino beginners and makers with the easiest experience of learning and playing with the Arduino platform...
  • USB Volt Amp Power Meter Voltage Tester Current Charging Mon
    Precio:  $1,821.00

    USB Volt Amp Power Meter Voltage Tester Current Charging Mon

    -Titulo Original : RioRand USB Volt Amp Power Meter Voltage Tester Current Charging Monitor LCD Display DC (USB Blaster) -Fabricante : RioRand -Descripcion Original: Reemplazo de los siguientes números de modelo/pieza de la batería: P5542100-P. Diseñado para/compatible con los siguientes modelos de altavoces Bluetooth: JBL Pulse 3, JBLPULSE3BLKAM, JBLPULSE3WHTAM. 3.7V 6000mAh 22.2Wh Paquete de Baterías Recargables de Litio-Polímero. Incluye herramientas de instalación gratuitas...
  • LOLIN D1 Mini Pro V2.0.0 WiFi IoT Development Board 16MB MicroPython Nodemcu Arduino
    Precio:  $1,609.00

    LOLIN D1 Mini Pro V2.0.0 WiFi IoT Development Board 16MB MicroPython Nodemcu Arduino

    -Titulo Original : Genuine/Original LOLIN D1 Mini Pro V2.0.0 WiFi IoT Development Board 16MB MicroPython Nodemcu Arduino-Fabricante : STAR MARS-Descripcion Original: Genuine/Original LOLIN D1 Mini Pro V2.0.0 // New Logo - LOLIN (previous WeMos) // Upgraded from previous version (V1.1.0,V1.0.0) // Further optimize the circuit // Compatible with MicroPython, Arduino, Nodemcu // Capacity:  |  Color: 11 digital input/output pinsInterrupt/pwm/I2C/one-wire1 analog input(3.2V max input)16M bytes(128M bit) FlashExternal antenna connectorBuilt-in PCB antennaLithium battery interface, 500mA Max charging currentLOLIN I2C PortCompatible with Arduino, MicroPython, NodeMCUDefault firmware: lastest MicroPython Microcontroller:                   ESP-8266EXOperating Voltage:              3.3VAnalog Input Pins:              1(Max input: 3.2V)Clock Speed:                      80MHz/160MHzLength:                               48mmWidth:                                 25.4mmWeight:                               4.5g All of the IO pins have interrupt/pwm/I2C/one-wire support except D0.All of the IO pins run at 3.3V. V2.0.0 (current version)V1.1.0V1.0.01x Genuine/Original LOLIN D1 Mini Pro V2.2.0 Development Boar...
  • HDMI 7 800x480 Display Backpack - Without Touch
    Precio:  $10,809.00

    HDMI 7 800x480 Display Backpack - Without Touch

    -Titulo Original : HDMI 7 800x480 Display Backpack - Without Touch-Fabricante : ADAFRUIT-Descripcion Original: Great small HDMI monitor // Perfect for Raspberry Pi // Nice monitor for vehicle projects // Crystal clear display // ts a mini panel-mountable HDMI monitor! So small and simple, you can use this display with any computer that has HDMI output, and the shape makes it easy to attach to a case or rail. This backpack features the TFP401 for decoding video, and includes the attached display so its plug-n-play. The TFP401 is a beefy DVI/HDMI decoder from TI. It can take unencrypted video and pipe out the raw 24-bit color pixel data - HDCP not supported! The 7 display is 800x480 resolution, which is just enough to run most software, but still small enough that it can be used in portable or embedded projects without the bulk. You can even power the entire display from a USB port. With the default 7 800x480 display and 150mA backlight current, the current draw is 600mA total. You can reduce that down 400mA by running the backlight at half-brightness (75mA). With the backlight off, the decoder and display itself draws 250mA. If you want more backlight control, there's a PWM input, connect that to your microcontroller or other PWM output and you can continuously dim the backlight as desired. This version does not have a touch screen capability. In particular, they suggest it for use with single board computers (or desktop/laptops!) with DVI/HDMI output like the Raspberry Pi or BeagleBone Black. You can power the driver over USB as long as your computer can supply 600mA on the USB port, and then feed it video via the HDMI port. Please note the TFP401 decoder chip does not contain a video scaler, it will not resize/shrink video...
  • WINGONEER M5Stack ESP32 Módulo de controlador de motor paso a paso GRBL I2C Motor paso a paso MEGA328P 3- EJE Incluido I
    Precio:  $3,661.00

    WINGONEER M5Stack ESP32 Módulo de controlador de motor paso a paso GRBL I2C Motor paso a paso MEGA328P 3- EJE Incluido I

    -Titulo Original : WINGONEER® M5Stack ESP32 Stepper Motor Driver Module GRBL I2C Step-Motor MEGA328P, 3- AXIS Included, Blockly Stackable IoT ESP32 Arduino/Python Programming DIY-Fabricante : WINGONEER%C2%AE-Descripcion Original: The default I2C address is 0x70. In principle, a host can connect multiple stepper motor modules. Users need to modify the address to compile and download code. Using high quality DRV8825 module, the peak current can reach 1.5A. Stackable IoT Module: Support arduino / python Programming and using GRBL firware. // For people:Software / hardware product engineers, designers, project contractors, enthusiasts, start-ups and educational groups. // 1. This stepper motordriver modulecontains a MEGA328P, which is equivalent to Arduino UNO, runs the modified GRBL library (open source), uses I2C to communicate with the host CORE, and can send GCODE to GRBL through I2C. 2. The default I2C address is 0x70. In principle, a host can connect multiple stepper motor modules. Users need to modify the address to compile and download code. 3. Using high quality DRV8825 module, the peak current can reach 1.5A. The StepMotorDriver Module is a development kit based on ESP32 chip. Programming Support Blockly Arduino Python Using GRBL Firware Esp32 Chip:240MHz dual core, 600 DMIPS, 4MB SRAM, Wi-Fi, dual mode Bluetooth Software / hardware product engineers, designers, project contractors, enthusiasts, start-ups and educational groups. 1x ESP32 Stepper Motor Driver Module...
  • Pantalla LCD TFT SainSmart de 4.3 pulgadas para Arduino DUE MEGA 2560 UNO R3 (4.3 LCD)
    Precio:  $4,479.00

    Pantalla LCD TFT SainSmart de 4.3 pulgadas para Arduino DUE MEGA 2560 UNO R3 (4.3 LCD)

    -Titulo Original : SainSmart 4.3 inch TFT LCD Display for Arduino DUE MEGA 2560 UNO R3 (4.3 LCD)-Fabricante : SainSmart-Descripcion Original: This 4.3" TFT LCD Module can be can be easy controlled by MCU such as 8051, PIC, AVR, ARDUINO, and ARM . // It can be used in any embedded systems which require display high quality colorful image. // This LCD has a superior display quality and super wide viewing angle // Compatible with Arduino MEGA 2560 and Arduino DUE, with the CTE Mega and DUE shield // Size: TFT LCD Extend shield can help you out of the bothers to use other cables. You just need to plug the module to arduino mega2560/Mega2560 R3/DUE through this shield. Mega 2560 is a microcontroller board based on the ATmega2560. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Duemilanove or Diecimila. MEGA2560 R3 uses an ATMega16U2 instead of the ATMega8U2 chip, which allows for faster transfer rates and more memory. No drivers needed for Linux or Mac, and the ability to have the Uno show up as a keyboard, mouse, joystick, etc. Also adds SDA and SCL pins next to the AREF. Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU (datasheet). It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button....
  • Arduino Uno R3 Kit SUNFOUNDER (0DGNZ9G8)
    Precio:  $3,063.00

    Arduino Uno R3 Kit SUNFOUNDER (0DGNZ9G8)

    -Titulo Original : SunFounder Sidekick Basic Starter Kit w/Breadboard, Jumper wires, Color Led, Resistors, Buzzer For Arduino UNO R3 Mega2560 Mega328 Nano - Including 42 Page Instructions Book-Fabricante : SUNFOUNDER-Descripcion Original: SunFounder Basic Kit, an actual basic kit for beginners to learn knowledge about Arduino and electronics. // Quick-responding technical support for free. With detailed user manual containing 11 projects, code, Fritzing images, datasheets, and so on. // The electronic circuit kit with lots of components,all of them would be useful in your experiments // Well-designed case for the package for you to store the components after finishing the experiment. // 100% compatible with Arduino UNO R3, MEGA 2560 R3, NANO. The UNO R3 Board is NOT included. The UNO Board is NOT included // Color: There are many small components and sensors in this kit, with which you can learn diverse basic knowledges by following the experiments. Also as you've learnt much during the process, you may explore more functions with the parts provided or use extra devices at hand. This kit is a great one for you to start learning Arduino program. Code, Fritzing files and datasheets are free to view and download under the LEARN section on SunFounder website. 11 Projects for Beginners Lesson 1 Button Lesson 2 Flowing LED Lights Lesson 3 Buzzer Lesson 4 Controlling an LED by Potentiometer Lesson 5 Photoresistor Lesson 6 RGB LED Lesson 7 Servo Lesson 8 Tilt-Switch Lesson 9 Thermistor Lesson 10 Light Alarm Lesson 11 Automatically Tracking Light Source Package included: 1 x Project Box 1 x Booklet 1 x Breadboard 65 x Jumper Wires 10 x Red LED 10 x Green LED 1 x RGB LED 10 x Ceramic Capacitor (10nF) 10 x Ceramic Capacitor (100nF) 5 x Electrolytic Capacitor (100uF) 10 x Resistor (220Ω) 10 x Resistor (1KΩ) 10 x Resistor (10KΩ) 1 x Tilt Switch 1 x Thermistor 1 x Photocell 1 x Diode Rectifier (1N4007) 1 x Active Buzzer 1 x Passive Buzzer 5 x Button 5 x Switch 1 x Mini Servo 1 x Potentiometer with Knob 1 x NPN Transisto...
  • Adafruit {3657} ATSAMD09 Breakout with Seesaw
    Precio:  $1,581.00

    Adafruit {3657} ATSAMD09 Breakout with Seesaw

    -Titulo Original : Adafruit {3657} ATSAMD09 Breakout with Seesaw-Fabricante : ADAFRUIT-Descripcion Original: Adafruit seesaw is a near-universal converter framework which allows you to add add and extend hardware support to any I2C-capable microcontroller or microcomputer. Instead of getting separate I2C GPIO expanders, ADCs, PWM drivers, etc, seesaw can be configured to give a wide range of capabilities. For example, our ATSAMD09 breakout with seesaw gives you 3 x 12-bit ADC inputs 3 x 8-bit PWM outputs 7 x GPIO with selectable pullup or pulldown 1 x NeoPixel output (up to 340 pixels) 1 x EEPROM with 64 byte of NVM memory (handy for storing small access tokens or MAC addresses) 1 x Interrupt output that can be triggered by any of the accessories 2 x I2C address selection pins 1 x Activity LED But you can reprogram and reconfigure the chip to have more or less of each peripheral - as long as it fits into the ATSAMD09D14's firmware! For example, there's also a UART converter but it isn't included in the default firmware. The ATSAMD09 breakout is great for development of seesaw capabilities (we use it in-house for our design work) or you can use it as-is to give your Raspberry Pi or ESP8266 more hardware support! Each breakout comes with the assembled and tested board, as well as some header strips. Please note: The boards do not come with a bootloader. If you want to do development on seesaw (e.g. changing the configuration) you'll need to pick up a J-Link and we recommend a SWD adapter breakout. At this time our project is for Atmel Studio but you could probably get it working with arm gcc and a Makefile. We don't provide any support for custom builds of seesaw - we think this is cool and useful for the Maker community...
  • MELIFE 2 Pack ESP32 ESP-32S Placa de desarrollo 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontrolador Procesador
    Precio:  $1,922.00

    MELIFE 2 Pack ESP32 ESP-32S Placa de desarrollo 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontrolador Procesador

    -Titulo Original : MELIFE 2 Pack ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with ESP32s Antenna RF AMP Filter AP STA for Arduino IDE-Fabricante : MELIFE-Descripcion Original: 2 PACK 2.4GHz Dual Mode WiFi + Bluetooth Development Board // Ultra-Low power consumption, works perfectly with the Arduino IDE // Support LWIP protocol, Freertos // SupportThree Modes: AP, STA, and AP+STA // ESP32 is a safe, reliable, and scalable to a variety of applications // Color: ESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters, and power management module. The entire solution takes up the least amount of printed circuit board area. This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology, power and RF properties best, which is safe, reliable, and scalable to a variety of applications. High performance-price ratio Small volume, easily embeded to other products Strong function with support LWIP protocol, Freertos Supporting three modes: AP, STA, and AP+STA Supporting Lua program, easily to develop https://github.com/espressif/arduino-esp32 https://github.com/nodemcu/nodemcu-firmware/tree/dev-esp32 https://github.com/Nicholas3388/LuaNode If it cann't get bluetooth working? Using Node32s as the Board selection. To reference GPIO pins in code use just the number, for example digitalWrite(13, HIGH) sets GPIO13 high. The built-in LED to GPIO2. 2 x ESP3...
  • Adafruit Ultimate GPS Breakout - 66 channel w/10 Hz updates.
    Precio:  $8,095.00

    Adafruit Ultimate GPS Breakout - 66 channel w/10 Hz updates.

    -Titulo Original : Adafruit Ultimate GPS Breakout - 66 channel w/10 Hz updates - Version 3 with External Antenna and uFL to SMA Cable Kit-Fabricante : ADAFRUIT-Descripcion Original: Kit includes GPS Receiver, External Antenna and uFL to SMA Cable! // -165 dBm sensitivity, 10 Hz updates, 66 channels // 5V friendly design and only 20mA current draw // Antenna: 3-5V 28dB 5 Meter cable // uFL to SMA Cable: This cable is RG178 and is 15cm (5.9") long not including the RP-SMA connector. // This is the ultimate GPS module for your Raspberry Pi, Arduino or other microcontroller project! The breakout is built around the MTK3339 chipset, a no-nonsense, high-quality GPS module that can track up to 22 satellites on 66 channels, has an excellent high-sensitivity receiver (-165 dB tracking!), and a built in antenna. It can do up to 10 location updates a second for high speed, high sensitivity logging or tracking. Power usage is incredibly low, only 20 mA during navigation. Includes an ultra-low dropout 3.3V regulator so you can power it with 3.3-5VDC in, 5V level safe inputs, ENABLE pin so you can turn off the module using any microcontroller pin or switch, a footprint for optional CR1220 coin cell to keep the RTC running and allow warm starts and a tiny bright red LED. The LED blinks at about 1Hz while it's searching for satellites and blinks once every 15 seconds when a fix is found to conserve power. If you want to have an LED on all the time, we also provide the FIX signal out on a pin so you can put an external LED on. Two features that really stand out about version 3 MTK3339-based module is the external antenna functionality and the the built in data-logging capability. The module has a standard ceramic patch antenna that gives it -165 dB sensitivity, but when you want to have a bigger antenna, you can easily add one. Comes with one fully assembled and tested module, a piece of header you can solder to it for breadboarding, and a CR1220 coin cell holder. Battery not included. Many tutorials available at Adafruit's website...
  • HiLetgo ESP32 OLED WiFi Kit ESP-32 Pantalla OLED azul de 0.96 pulgadas WiFi + Bluetooth CP2012 Placa de desarrollo de In
    Precio:  $2,474.00

    HiLetgo ESP32 OLED WiFi Kit ESP-32 Pantalla OLED azul de 0.96 pulgadas WiFi + Bluetooth CP2012 Placa de desarrollo de In

    -Titulo Original : HiLetgo ESP32 OLED WiFi Kit ESP-32 0.96 Inch Blue OLED Display WiFi+Bluetooth CP2012 Internet Development Board for Arduino ESP8266 NodeMCU-Fabricante : HILETGO-Descripcion Original: ESP32 WIFI Kit for Arduino ESP8266 NodeMCU // Driver Library - u8g2: https://github.com/olikraus/u8g2 // Instructable for Internet Time: https://www.instructables.com/id/WiFi-Kit-32-NTP-Clock/; Install guide and bunches of info: https://github.com/Heltec-Aaron-Lee/WiFi_Kit_series // English documentation: https://robotzero.one/heltec-wifi-kit-32/; https://github.com/Heltec-Aaron-Lee/WiFi_Kit_series // Operating voltage: 3.3V to 7V; Supports Sniffer, Station, softAP and Wi-Fi Direct modes // WIFI Kit series is the new development of the cost-effective networking program, the main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b / g / N HT40 Wi-Fi transceiver, baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth). This product is based on the WIFI Kit 32 added SX1278 chip, that is,for LoRa remote modem, 433MHz frequency, about -148dBm high sensitivity, +20 dBm power output, high reliability, transmission distance (measured open area communication distance 2.6Km). Onboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display, lithium battery charging circuit and interface, CP2102 USB to serial chip, the perfect support for Arduino development environment, can be very simple and fast for program verification and product development. This item come unassembled, soldering is required, not equipped with lithium battery. Here is the link with English documentation: https://hackaday.io/project/26991-esp32-board-wifi-lora-32 https://robotzero.one/heltec-wifi-kit-32/; https://github.com/Heltec-Aaron-Lee/WiFi_Kit_series; Operating voltage: 3.3V to 7V Operating temperature range: -40 ° C to + 90 ° C Supports Sniffer, Station, softAP and Wi-Fi Direct modes Data rate: 150 Mbps @ 11n HT40,72 Mbps @ 11n HT20,54 Mbps @ 11g, 11 Mbps @ 11b Transmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n Receiver sensitivity up to - 98 dBm UDP continues to throughput by 135 Mbps 1* ESP32 0.96 OLED WiFi Bluetooth Development Board...
  • Feetech Fs90r Micro Servo De Rotacion Continua Con Rueda Xs
    Precio:  $3,477.00

    Feetech Fs90r Micro Servo De Rotacion Continua Con Rueda Xs

    -Titulo Original : Geekstory Feetech FS90R 360 Degree Continuous Rotation Micro Servo with RC Wheel Tire (4 Pack) -Fabricante : Geekstory -Descripcion Original: Recibirá 4pcs Feetech 360 grados de rotación continua servo y 4pcs rueda. Este servo de pies tiene certificado CE y ROHS. La velocidad de operación es 110RPM (4.8V), 130RPM (6V), pero puede cambiar el pwm para cambiar la velocidad del servo, para hacerlo más lento o más rápido Servo de par de torsión: 1.3kg.cm/18.09oz.in(4.8V), 1.5kg.cm/20.86oz.in(6V). Esta rueda de plástico negro se ajusta a presión en el eje del engranaje de salida FS90R y es fácil de hacer una buena solución de manejo para robots pequeños...
  • 100 unidades luces led 5 mm azul (luz color azul)
    Precio:  $873.00

    100 unidades luces led 5 mm azul (luz color azul)

    -Titulo Original : MCIGICM Blue 5mm LED Light Diodes, LED Circuit Assorted Kit for Science Project Experiment (100pcs) -Fabricante : MCIGICM -Descripcion Original: Compatible con Compatible with: Suunto 3 Fitness, Suunto 5, Traverse, Kailash, Spartan Trainer, Ambit 1 2 3 Smartwatch...
Mostrar del 1 al 24 (de 249 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]