Arriba

Inicio » Catalogo » Computación » Impresión > Impresión 3D > Picos Nozzle

Impresión > Impresión 3D > Picos Nozzle

Mostrar: 
Mostrar del 121 al 138 (de 138 productos)
Páginas de Resultados: [<< Anterior]  ... 6 
  • Micro Swiss Mk10 Todo El Kit De Metal Hotend .4mm Boquilla W
    Precio:  $204,349.00
    Agregar al Carrito   Vista

    Micro Swiss Mk10 Todo El Kit De Metal Hotend .4mm Boquilla W

    -Titulo Original : Micro Swiss MK10 All Metal Hotend Kit .4mm Nozzle WANHAO, FlashForge, Dremel Idea Builder-Fabricante : MICRO-SWISS-Descripcion Original: Fits: FlashForge Creator Pro / FlashForge Creator X / FlashForge Dreamer / QIDI TECH I / Dremel Idea Builder / PowerSpec 3D Pro / PowerSpec 3D X / PowerSpec Ultra 3D Printer / Wanhao Duplicator 4S / Wanhao Duplicator 4X / Wanhao i3 / Monoprice Maker Select 3D Printer v2 / Cocoon Create 3D Print // Kit Includes: 1 Plated Brass Wear Resistant Nozzle / 1 Thermal tube / 1 Thermal compound // This is a Drop in All Metal Conversion Kit for MK10 Extruders // Made in USA by Micro Swiss // This is an all metal hotend upgrade kit for MK 10 style extruders. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature than possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn't have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length. 1 Plated Brass Wear Resistant Nozzle 1 Thermal tube 1 Thermal compound   FlashForge Creator Pro FlashForge Creator X FlashForge Dreamer QIDI TECH I Dremel Idea Builder ​PowerSpec 3D Pro​ PowerSpec 3D X PowerSpec Ultra 3D Printer Wanhao Duplicator 4S Wanhao Duplicator 4X Wanhao i3 Monoprice Maker Select 3D Printer v2 Cocoon Create 3D Prin...
  • Micro Swiss MK8 Chapado A2 Herramienta de acero 0.4
    Precio:  $112,009.00
    Agregar al Carrito   Vista

    Micro Swiss MK8 Chapado A2 Herramienta de acero 0.4

    -Titulo Original : Micro Swiss MK8 Plated A2 Tool Steel Wear Resistant Nozzle (MakerBot, CraftBot, Creality CR10, Tevo Tornado) .4mm-Fabricante : MICRO-SWISS-Descripcion Original: A2 Hardened Tool Steel Plated with TwinClad XT // Fits: MK8 Extruders, Creality CR-10, Tevo Tornado, MakerBot, CraftBot, BQ Witbox // 1.75mm Filament // Orifice size: .4mm // Made in USA by Micro Swiss // This is MK8 style nozzle, it is made from a A2 Tool Steel, heat treated to 57-62 RC and plated with TwinClad XT coating. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Micro Swiss MK8 Chapado A2 Herramienta de acero 0.6
    Precio:  $112,009.00
    Agregar al Carrito   Vista

    Micro Swiss MK8 Chapado A2 Herramienta de acero 0.6

    -Titulo Original : Micro Swiss MK8 Plated A2 Tool Steel Wear Resistant Nozzle (MakerBot, CraftBot, Creality CR10, Tevo Tornado) .6mm-Fabricante : MICRO-SWISS-Descripcion Original: A2 Hardened Tool Steel Plated with TwinClad XT // Fits: MK8 Extruders, Creality CR-10, Tevo Tornado, MakerBot, CraftBot, BQ Witbox // 1.75mm Filament // Orifice size: .6mm // Made in USA by Micro Swiss // This is MK8 style nozzle, it is made from a A2 Tool Steel, heat treated to 57-62 RC and plated with TwinClad XT coating. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Micro Swiss MK8 Chapado A2 Herramienta de acero 0.8
    Precio:  $112,009.00
    Agregar al Carrito   Vista

    Micro Swiss MK8 Chapado A2 Herramienta de acero 0.8

    -Titulo Original : Micro Swiss MK8 Plated A2 Tool Steel Wear Resistant Nozzle (MakerBot, CraftBot, Creality CR10, Tevo Tornado) .8mm-Fabricante : MICRO-SWISS-Descripcion Original: A2 Hardened Tool Steel Plated with TwinClad XT // Fits: MK8 Extruders, Creality CR-10, Tevo Tornado, MakerBot, CraftBot, BQ Witbox // 1.75mm Filament // Orifice size: .8mm // Made in USA by Micro Swiss // This is MK8 style nozzle, it is made from a A2 Tool Steel, heat treated to 57-62 RC and plated with TwinClad XT coating. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Micro Swiss Plated A2 Hardend Tool Acero Boquilla RepRap 0.6
    Precio:  $112,009.00
    Agregar al Carrito   Vista

    Micro Swiss Plated A2 Hardend Tool Acero Boquilla RepRap 0.6

    -Titulo Original : Micro Swiss Plated A2 Hardend Tool Steel Nozzle RepRap - M6 Thread 1.75mm Filament .6mm (E3D V5 V6 / Prusa i3 MK2)-Fabricante : MICRO-SWISS-Descripcion Original: A2 Hardened Tool Steel Nozzle Plated with TwinClad XT // Fits: E3D 1.75mm Hotend V5-V6, Prusa i3 // 1.75mm Filament / M6 Threads // Orifice size: .6mm // Made in USA by Micro Swiss // This is RepRap style nozzle, it is made from a A2 Tool Steel, heat treated to 57-62 RC and plated with TwinClad XT coating. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Micro Swiss Plated A2 Hardend Tool Acero Boquilla RepRap 0.8
    Precio:  $112,009.00
    Agregar al Carrito   Vista

    Micro Swiss Plated A2 Hardend Tool Acero Boquilla RepRap 0.8

    -Titulo Original : Micro Swiss Plated A2 Hardend Tool Steel Nozzle RepRap - M6 Thread 1.75mm .8mm (E3D V5 V6 / Prusa i3 MK2)-Fabricante : MICRO-SWISS-Descripcion Original: A2 Hardened Tool Steel Nozzle Plated with TwinClad XT // Fits: E3D V5-V6, Prusa i3 MK2 // 1.75mm Filament / M6 Threads // Orifice size: .8mm // Made in USA by Micro Swiss // This is RepRap style nozzle, it is made from a A2 Tool Steel, heat treated to 57-62 RC and plated with TwinClad XT coating. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Micro Swiss resistente al desgaste .3 mm Robo 3D Boquilla M6
    Precio:  $87,589.00
    Agregar al Carrito   Vista

    Micro Swiss resistente al desgaste .3 mm Robo 3D Boquilla M6

    -Titulo Original : Micro Swiss Plated Wear Resistant .3mm Robo 3D Nozzle - M6 Thread 1.75mm Filament Hexagon (Robo R1/R1 +Plus, Robo C2, Robo R2)-Fabricante : MICRO-SWISS-Descripcion Original: Upgrade nozzle for Robo R1/R1 +PLUS, Robo C2, Robo R2 // Nozzle Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // 1.75mm Filament // Orifice size: .3mm // Made in USA by Micro Swiss // This is Micro Swiss nozzle for Robo 3D Printers, M6 thread, 1.75mm Filament, Hexagon style hotend. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Mk10 Boquilla Para 3d Impresora M7 Rosca Bronce Extrusora Ca
    Precio:  $61,939.00
    Agregar al Carrito   Vista

    Mk10 Boquilla Para 3d Impresora M7 Rosca Bronce Extrusora Ca

    -Titulo Original : MK10 Nozzle for 3D Printer, M7 Thread Brass Extruder Head Hotend Nozzle 1.75mm Filament with Cleaning Needles, 4Pcs 0.4mm Nozzle + 1Pcs Nozzle x (0.2 0.3 0.5 0.6 0.8 1.0 mm)-Fabricante : UMLIFE-Descripcion Original: ❃❃ M7 thread, 1.75mm filament, Use with 2mm x 4mm PTFE tubes(Not included.) // ❃❃ Wear resistant high lubricity nozzle for Flashforge and others using the MK10 nozzle. // ❃❃ The 3D printer nozzles are made of high quality brass material, sturdy and durable. // ❃❃ General purpose, low cost, great for printing materials that don't have anything abrasive in them. // ❃❃ Diameter: input diameter: 1.75mm; output diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm. // These brass extruder nozzles replace broken, fractured, and clogged nozzles on your MK10 dual/Single-extruders. These are extruder nozzles which are suitable for the newer MK10 style print heads, Creator X, Creator Pro, Inventor, Finder, Guider, Guider II, and Dreamer 3D Printers. These are M7thread and require to be used with a 4mm OD Teflon Tube. Material: Brass Input Filament Diameter: 1.75mm Weight: About 2g/each Nozzle diameter: sizes include 0.2mm,0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Wanhao Duplicator 4 series Flashforge (newer models) FlashForge Creator Pro FlashForge Creator X FlashForge Dreamer Dremel Idea Builder Monoprice Maker Select 3D Printer v2 PowerSpec 3D Pro PowerSpec 3D X Qidi Tech Wanhao Duplicator 4S Wanhao Duplicator 4X Wanhao i3 Cocoon Create 3D Printer 0.2mm Nozzle X 1pcs 0.3mm Nozzle X 1pcs 0.4mm Nozzle X 4pcs 0.5mm Nozzle X 1pcs 0.6mm Nozzle X 1pcs 0.8mm Nozzle X 1pcs 1.0mm Nozzle X 1pcsCleaning Needle X 5pc...
  • Olsson block Kit para Ultimaker 2 + UM2 Printer 3D extendida
    Precio:  $210,709.00
    Agregar al Carrito   Vista

    Olsson block Kit para Ultimaker 2 + UM2 Printer 3D extendida

    -Titulo Original : Olsson block Kit for Ultimaker 2 + UM2 Extended 3D printer, Olsson Block Hotend Interchangeable nozzle, 3.0mm-Fabricante : POLISI-Descripcion Original: Olsson Block hotend kit is improved for Ultimaker 2 that the nozzle and heat block are two seperate pieces // can change the nozzle size easily. // including 4 pieces nozzles: 1pcs 0.25mm + 1pcs 0.4mm + 1pcs 0.6mm + 1pcs 0.8mm // This Olsson Block hotend kit is improved for Ultimaker 2 that the nozzle and heat block are two seperate pieces, can change the nozzle size easily. Filament size use: 3.0mm Nozzles: 1pcs 0.25mm + 1pcs 0.4mm + 1pcs 0.6mm + 1pcs 0.8mm Package: 1pcs olsson block 4pcs nozzles 1pcs scre...
  • Sensor temperatura PT100 m3 hasta 400 grados molex ver mdelo
    Precio:  $65,039.00
    Agregar al Carrito   Vista

    Sensor temperatura PT100 m3 hasta 400 grados molex ver mdelo

    -Titulo Original : Click image to open expanded view Up to 400 Degree, m3 PT100 Temperature Sensor w/Molex Microfit3.0 Connector for Ultimaker 2,Cyclops+, Chimera,Kraken, V6 Hotend 3D Printer use-Fabricante : POLISI3D-Descripcion Original: El PT100 es de alta temperatura hasta 400 grados, sensor de temperatura de alta precisión, ahora puede usarlo en lugar del termistor en su hotend V6, el sensor PT100 no encajará en los hotends estándar, pero se puede usar para hotend V6, hotend Chimera, kraken hotend Utilizando el bloque calefactor PT100 V6. Tenga en cuenta que un PT100 no es lo mismo que un termistor y, a menos que su electrónica admita explícitamente dispositivos de detección RTD, necesitará una placa amplificadora. Paquete: Sensor PT100 de 1 pieza m3 * 15 * 200 mm con conecto...
  • set 10 boquillas de impresora 3d MK8 0.6mm + 5 agujas 0.5mm
    Precio:  $46,729.00
    Agregar al Carrito   Vista

    set 10 boquillas de impresora 3d MK8 0.6mm + 5 agujas 0.5mm

    -Titulo Original : Aokin 10 Pcs 0.6mm 3D Printer Nozzles MK8 Extruder Nozzles And 5 Pcs 0.5mm Stainless Steel Nozzle Cleaning Needles For Creality Ender 3/3 Pro/3 V2, Ender 5/5 Pro, CR-10/10S, Makerbot, Anet A8-Fabricante : Aokin-Descripcion Original: - El paquete incluye: 10 boquillas extrusoras MK8 para impresora 3D de 0,6 mm, 5 agujas de limpieza de boquillas de 0,5 mm en una botella. - Compatibilidad: las boquillas MK8 se ajustan a Creality Ender 3/3 Pro, Ender 3 V2, Ender 5/5 Pro, CR-10/10S, Makerbot MK8, Reprap Prusa I3, Tevo Tarantula, Anet A8 y otras impresoras 3D. - Boquillas: hechas de latón de primera calidad, resistentes y resistentes a altas temperaturas, seda suave, conexión con rosca M6, fácil de usar. Rosca de salida de las boquillas: M6, diámetro del filamento: 1,75 mm, diámetro de salida: 0,6 mm. - Agujas de limpieza de boquillas: hechas de material de acero inoxidable de alta calidad, resistentes, duraderas y flexibles, fáciles de doblar pero no rotas. Apto para la mayoría de las boquillas de impresora 3D de 0,6 mm, también se puede usar para limpiar otras piezas pequeñas, como la garganta y los engranajes de alimentación. - Los accesorios de la impresora 3D Aokin utilizan materias primas de alta calidad y mano de obra fina....
  • Set 16 Nozzles mk8 Para Impresora 3d +5 Agujas De Limpieza
    Precio:  $47,799.00
    Agregar al Carrito   Vista

    Set 16 Nozzles mk8 Para Impresora 3d +5 Agujas De Limpieza

    -Titulo Original : Aokin 16 Pcs 3D Printer Nozzles MK8 Extruder Nozzles 0.2/0.3/0.4/0.5/0.6/0.8/1.0mm And 5 Pcs 0.2/0.3/0.4/0.5/0.6mm Nozzle Cleaning Needles For Creality Ender 3/3 Pro/3 V2, Ender 5/5 Pro, CR-10/10S-Fabricante : Aokin-Descripcion Original: - Compatibilidad: las boquillas MK8 se ajustan a Creality Ender 3/3 Pro, Ender 3 V2, Ender 5/5 Pro, CR-10/10S, Makerbot MK8, Reprap Prusa I3, Tevo Tarantula, Anet A8 y otras impresoras 3D. - El paquete incluye: 16 boquillas extrusoras MK8, 7 tamaños: 2x0,2 mm, 2x0,3 mm, 4x0,4 mm, 2x0,5 mm, 2x0,6 mm, 2x0,8 mm, 2x1,0 mm. 1 pieza de agujas de limpieza de 0,2/0,3/0,4/0,5/0,6 mm, un total de 5 piezas de agujas de limpieza de boquillas de impresora 3D en una botella. - Boquillas: hechas de latón de primera calidad, resistentes y resistentes a altas temperaturas, seda suave, conexión con rosca M6, fácil de usar. Rosca de salida de las boquillas: M6, diámetro del filamento: 1,75 mm, diámetro de salida: 0,2/0,3/0,4/0,5/0,6/0,8/1,0 mm. - Agujas de limpieza de boquillas: hechas de material de acero inoxidable de alta calidad, resistentes, duraderas y flexibles, fáciles de doblar pero sin romper. Apto para la mayoría de los tamaños de boquillas de impresora 3D, también se puede usar para limpiar otras piezas pequeñas, como la garganta y los engranajes de alimentación. El paquete incluye: 2 boquillas extrusoras MK8 para impresora 3D de 0,2 mm 2 boquillas extrusoras MK8 para impresora 3D de 0,3 mm 4 boquillas extrusoras MK8 para impresora 3D de 0,4 mm 2 boquillas extrusoras MK8 para impresora 3D de 0,5 mm 2 boquillas extrusoras MK8 para impresora 3D de 0,6 mm 2 x Boquilla extrusora MK8 de impresora 3D de 0,8 mm 2 boquillas extrusoras MK8 de impresora 3D de 1,0 mm 1 set agujas de limpieza de 0,2/0,3/0,4/0,5/0,6 mm, total 5 agujas de limpieza de boquillas de impresora 3D en una botella. Compatible: impresora 3D con rosca M6 externa hotend estilo MK8, como Creality Ender 3/3 Pro, Ender 3 V2, Ender 5/5 Pro, CR-10/10S, Makerbot MK8, Reprap Prusa I3, Tevo Tarantula, Anet A8 y otras impresoras 3D. Nota: No use las agujas para limpiar hasta que la boquilla se caliente a más de 200 grados. Después de reemplazar la boquilla, vuelva a calibrar la distancia entre la boquilla y la placa de construcción para garantizar la calidad de las piezas de impresión...
  • Set Bloque Termico Barral Y Boquilla Para Mk8 Impresora 3d
    Precio:  $66,849.00
    Agregar al Carrito   Vista

    Set Bloque Termico Barral Y Boquilla Para Mk8 Impresora 3d

    -Titulo Original : Onyehn 22pcs/Lots A8&A2 3D Printer Part Each 5PCS 0.4mm Extruder Nozzle Print Head+1.75mm Teflon Throat Tube+Heater Blocks Hotend for MK8 Makerbot Reprap-Fabricante : Onyehn-Descripcion Original: Paquete de 5 x Impresora 3D Extrusora Hotend 30 mm de longitud 1.75 mm Tubo de entrada de boquilla (para impresora 3D MK8 Makerbot Reprap Prusa I3) y 5 x Impresora 3D 0.4 mm Extrusora Cabezal de impresión de boquilla de latón. Regalo 5pcs tuercas M6 y 2 llaves hexagonales Cabezal de impresión de boquilla de latón de extrusora de 0,4 mm: color dorado; Material - cobre (latón); Tamaño - 5 * 13 mm; Diámetro de entrada: 1.75 mm; Diámetro de salida: 0.4 mm. Boquilla de garganta: Hilo externo - M6; Diámetro interno - 2 mm; Longitud - 30 mm; Diámetro del filamento - 1.75 mm; Material: Acero inoxidable. Compatibilidad: compatible con todas las impresoras 3D PLA ABS de 1.75 mm Cantidad: 22pcs / lot (5x tubo de garganta de la boquilla de la impresora 3D 5x cabezales de impresión de la boquilla 5x bloques del calentador Hotend 5x tuercas M6 2x llaves hexagonales (para la impresora 3D MK8 Makerbot Reprap Prusa I3)) Product features: Type: Nozzle Throat Compatibility: 3D Printer Outer Thread: M6 Nozzle Throat Outer Diameter: 7mm Nozzle Throat Inner Diameter: 4mm Teflon Pipe Inner Diameter: 2mm Length: 30mm Filament Diameter: 1.75mm Material - Stainless Steel Specification of Brass Nozzle: Type: 0.4mm Extruder Brass Nozzle Print Head Color: Golden Material: copper (brass) Size: 5*13mm Input Diameter: 1.75mm Output Diameter: 0.4mm Specification of Heater Blocks Hotend: Name:Metal Part Color:Silver Specification:20*20*10mm Specification of Hex Key Wrench: Quantity: 2 Pack Diameter: 1.5mm and 2mm Shape: hex Package Including: 5 x 3D Printer heating block 5 x 3D Printer 30mm length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) 5 x 3D Printer 0.4mm Extruder Brass Nozzle Print Head 5 x M6 nuts 2 x Hex Key Wrenches Only the above package content, other products are not include...
  • set limpieza de boquillas impresora 3D 0.15/025/0.35/0.4mm
    Precio:  $79,589.00
    Agregar al Carrito   Vista

    set limpieza de boquillas impresora 3D 0.15/025/0.35/0.4mm

    -Titulo Original : 40 Pieces 3D Printer Nozzle Cleaning Kit, 28 Pieces 0.15 Mm, 0.25 Mm, 0.35 Mm, 0.4 Mm, 0.5 Mm Nozzle Cleaner With Storage Box, 8 Pieces Cleaning Copper Wire Toothbrushes, 2 Pieces Tweezers-Fabricante : Frienda-Descripcion Original: - Contenido del paquete: recibirá 28 piezas de limpiador de boquillas de acero inoxidable en 5 tamaños, 2 piezas de cajas de almacenamiento, 8 piezas de cepillos de dientes de alambre de cobre de limpieza en 2 estilos, 2 piezas de pinzas en 2 estilos diferentes, cantidad suficiente y herramientas pueden satisfacer tu uso diario - Varios tamaños: este limpiador de boquillas de acero inoxidable tiene 5 tamaños diferentes, incluidos 12 x 0,4 mm, 10 x 0,35 mm, 2 x 0,5 mm, 2 x 0,15 mm, 0,25 x 2 mm, que pueden satisfacer sus diferentes necesidades de uso, adecuado para boquilla en la mayoría de los tamaños; Ven con 2 piezas de cajas de almacenamiento, convenientes para llevar y almacenar - Compatibilidad: estos accesorios de limpieza de boquillas de impresoras 3D son compatibles con la mayoría de las boquillas de impresoras 3D, compatibles con MK8, MK10, etc., verifique el modelo cuidadosamente antes de comprar; Nota: la mención de nombres de marcas y cualquier designación de modelo relacionada anterior es solo para fines de demostración de compatibilidad - Material de calidad: estos limpiadores de boquillas para impresoras 3D están hechos de acero inoxidable, estos cepillos de alambre están hechos de alambre de cobre, resistentes y flexibles, no se rompen ni se oxidan fácilmente, son convenientes para almacenar y pueden brindarle un servicio a largo plazo - Material de calidad: estos limpiadores de boquillas para impresoras 3D están hechos de acero inoxidable, estos cepillos de alambre están hechos de alambre de cobre, resistentes y flexibles, no se rompen ni se oxidan fácilmente, son convenientes para almacenar y pueden brindarle un servicio a largo plazo Kit de limpieza de boquillas de impresora 3D de 40 piezas, 28 piezas de 0,15 mm, 0,25 mm, 0,35 mm, 0,4 mm, agujas de limpieza de boquillas de 0,5 mm con caja de almacenamiento, cepillos de dientes de alambre de cobre de limpieza de 8 piezas, pinzas de 2 piezas Rompe fácilmente, tuerce fácilmente. Fácil de limpiar las boquillas de su impresora 3D y otras piezas pequeñas. Prácticos accesorios para el mantenimiento de las boquillas. Compatibilidad: estos accesorios de limpieza de boquillas de impresoras 3D son compatibles con la mayoría de las boquillas de impresoras 3D, compatibles con MK8, MK10, etc., . Especificaciones: Material: acero inoxidable, alambre de cobre Tamaño de las agujas de limpieza de boquillas: aprox. 12 x 0,4 mm, 10 x 0,35 mm, 2 x 0,5 mm, 2 x 0,15 mm, 0,25 x 2 mm El paquete incluye: 28 agujas de limpieza de boquillas de acero inoxidable 2 cajas de almacenamiento 8 cepillos de dientes de alambre de cobre para limpieza 2 pinzas Aviso cálido : Permita el error de medición. Los artículos puntiagudos pueden incluir, manténgalos alejados de los niños...
  • SIQUK 33 un. Printer 3D Boquilla Kit de Limpieza 30 un. 0.15
    Precio:  $72,199.00
    Agregar al Carrito   Vista

    SIQUK 33 un. Printer 3D Boquilla Kit de Limpieza 30 un. 0.15

    -Titulo Original : SIQUK 33 Pcs 3D Printer Nozzle Cleaning Kit 30 Pcs 0.15mm, 0.25mm, 0.35mm, 0.4mm, 0.5mm Cleaning Needles 2 Pcs Tweezers and 1 Pc Cleaning Cloth-Fabricante : SIQUK-Descripcion Original: Fine sizes assorted - 0.15 mm, 0.25 mm, 0.35mm, 0.4 mm and 0.5 mm cleaning needles not only suitable for most of sizes nozzle but also they can use for cleaning other small parts, such as throat and feeder gear // Premium material - SIQUK 3D printer nozzle cleaners are made of premium stainless steel material, sturdy, durable and flexible, easy to twist // Wide compatibility - compatible with most of 3D printers extruder nozzles offered from E3D Makerbot, MK8 Makerbot RepRap // Free gift - come with 2 different shape precision tweezers and 1 piece cleaning cloth, help you cleaning excess filament gear material and keep nozzles clean // Package include - there are 30 pieces 3D printer nozzle cleaning needles in 5 different size, 2 pieces different sharpe precision tweezers and 1 piece cleaning cloth, totally 33 pieces nozzle cleaning kit // SIQUK 30 Pieces 3D Printer Nozzle Cleaning Needles with 2 Pcs Tweezers and 1 Pc Cleaning Cloth Material: stainless steel Needle diameter: 0.15mm 0.25mm 0.35mm 0.4mm 0.5mm Don't use the needles to clean until the nozzle is heated over 200 degrees.  The nozzle cleaning needles are sharpe,please keep them away from children.  Package included 2 x 0.15mm cleaning needles 2 x 0.25mm cleaning needles 12 x 0.35mm cleaning needles 12 x 0.4mm cleaning needles 2 x 0.5mm cleaning needles 2 x tweezers 1 x cleaning cloth 1 x storage box  SIQUK are devoted to offer premium quality products to all cherished customers. Meanwhile supply If there are any questions, please feel free to contact us, SIQUK Customer Service Team will spare no efforts to assist with you within 24 hours...
  • Tubo teflon impresora 3D 3mm interno x 4mm externo (2m)
    Precio:  $51,269.00
    Agregar al Carrito   Vista

    Tubo teflon impresora 3D 3mm interno x 4mm externo (2m)

    -Titulo Original : RuiLing 1 Piece PTFE Tube 3D Printer Supplies & Accessories for Long Distance Nozzle Feed Tube J-Head Hotend Extruder Feeding Tube ID 3mm OD 4mm Length 2m -Fabricante : RuiLing -Descripcion Original: MOLESKINE ART COLLECTION: From sketchbooks and sketchpads to watercolor notebooks with heavy paper, to music notebooks with plain and pentagram pages, to storyboard layout notebooks, Moleskine's art collection of notebooks offer the quality you need. // DURABLE COVER & ELASTIC CLOSURE: Hold writing projects & notes in your Moleskine notebook with an elastic closure band & inner storage folders. Leather-like classic Moleskine cover & thick, ivory paper pages are perfect for writing with fountain pens. // GIFT QUALITY NOTEBOOKS: Moleskine planners, journals and notebooks come in hardcover or softcover and colors like black, red, blue, green and brown. The binding and cover have a durable finish, designed for daily journaling, writing and sketching. // DELUXE QUALITY PAGES: Moleskine's thick, ivory paper pages in a hardcover Moleskine notebook, softcover Moleskine notebook, cahier or volant journal, or Moleskine planner are perfectly textured for writing with a ballpoint pen, fountain pen, or pencil. // MOLESKINE IS LOVED FOR A REASON: Writers, students, artists, professionals & travelers love Moleskine notebooks & planners. From lined to unlined, dotted to graph paper there's a Moleskine notebook for your needs. Try one & you'll understand the passion. // Size:  |  Color: Product Description The Moleskine Art Plus Large Sketchbook is made with top quality heavy paper and is perfect for on the go drawings, sketches and tempera colors. Every Moleskine product is thread bound and has a cardboard cover with rounded corners, acid free paper, a bookmark, an elastic closure and an expandable inner pocket that contains the Moleskine history. Specifications: - Layout: Plain Paper - Dimensions: 5 x 8-1/4 - Hard Cover with elastic closure and bookmark ribbon. - Color: Black - Pages: 104 - Internal Accordion Pocket - Paper Weight: 165 gsm/111 lb.; FSC Certified Paper; Acid-Free (pH Neutral) From the Manufacturer Art Collection sketchbooks and albums are inviting blank spaces to fill with sketches and drawings. Portable comfort zone: be creative on the move, wherever you go. Keep your artwork private or share with the world. A range of professional artistic tools to capture the imagination and enable creativity - Hard Cover Notebook - Rounded corners - Elastic closure - Moleskine ivory paper - Matching ribbon bookmark - Paper: 120 gsm, acid-free, ivory, plain - “Incase of Loss” printed on the flyleaf - Expandable inner pocket in the back - Reusable paperband B-SIDE featuring additional printed tools - Lies flat, opens at 180° - The history of Moleskine is inside - Moleskine Srlcreates and sells FSC-certified product...
  • Wangdd22 High Speed ​​V6 Print Pack para RepRap Printer 3D 1
    Precio:  $75,079.00
    Agregar al Carrito   Vista

    Wangdd22 High Speed ​​V6 Print Pack para RepRap Printer 3D 1

    -Titulo Original : Wangdd22 High Speed V6 Print Pack for RepRap 3D Printer 1.75/3mm Filament Metal Hotend Volcano Extra Nozzles + Heater Block+NTC 3950 Thermistor-Fabricante : WANGDD22-Descripcion Original: Compatible with all E3D products and clones except CYCLOPS // Works with 1.75mm/3mm 3d printer filament // Hight Print Speed Pack for large print size 3D printer // Heater ceramic cartridge and thermistor are included // Full range of nozzle sizes to your Volcano: 0.60mm /0.80mm / 1.00mm /1.20mm // ★Warning : Small parts, not for children under 3 yrs Specification: ※Heater ceramic cartridge:12V ,40W ※Thermistor:NTC 3950 100K ※Nozzle:Volcano nozzle ※Heating block: Volcano hotend Package contents: ※1*Volcano Heater Block ※1*Heater ceramic cartridge ※1*NTC 3950 100K Thermistor ※1*0.6mm/0.8mm/1.0mm/1.2mm Volcano Nozzle for 3mm filament ※1*0.6mm/0.8mm/1.0mm/1.2mm Volcano Nozzle for 1.75mm filamen...
  • Zeelo 12 un. Printer 3D Boquilla MK8 Cabezal de impresión ex
    Precio:  $46,549.00
    Expira: 06/04/2022
    Agregar al Carrito   Vista

    Zeelo 12 un. Printer 3D Boquilla MK8 Cabezal de impresión ex

    -Titulo Original : Zeelo 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm Extruder Print Head with Free Box for 3D Printer Makerbot Creality CR-10 (Makerbot, Creality, RepRap,etc)-Fabricante : ZEELO-Descripcion Original: Package include: totally 12 pcs MK8 nozzles 12 x 0.4mm // Parameter: input diameter 1.75mm; output diameter 0.4m, mout thread: M6 // Applicability and compatibility: fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer // Premium material: the 3D printer nozzles are made of high quality brass material, sturdy and durable, connect with M6 out thread, easy to install // Attention: small accessories, please keep away from children // Color: gold  Material: brass  Output diameter: 0.4 mm  Input diameter: 1.75 mm  Screw thread: M6  Quantity: 12 pcs  12 x 0.4 mm 3D printer nozzles  1 x Plastic box  Zeelo are devoted to offer premium quality products to all cherished customers. Meanwhile supply 45 days money back guarantee and 18 months warranty.  If there are any questions, please feel free to contact us, Zeelo  Customer Service Team will spare no efforts to assist with you within 24 hours...
Mostrar del 121 al 138 (de 138 productos)
Páginas de Resultados: [<< Anterior]  ... 6 
Destacados
Revisar todos destacados

Información

Información

Nuestras ofertas

Nuestras ofertas

Su cuenta

Su cuenta

Mantente conectado

Mantente conectado

Contáctenos

Contáctenos

elbazardigital.com   © 2024