Arriba

Inicio » Catalogo » Computación » Impresión > Impresión 3D > Picos Nozzle

Impresión > Impresión 3D > Picos Nozzle

Mostrar: 
Mostrar del 49 al 72 (de 137 productos)
Páginas de Resultados: [<< Anterior]   1  2  3  4  5 ...  [Siguiente >>] 
  • boquilla extrusora nozzle MK10 M7 0.4mm x2u + 2 tubos ptfe
    Precio:  $65,039.00
    Agregar al Carrito   Vista

    boquilla extrusora nozzle MK10 M7 0.4mm x2u + 2 tubos ptfe

    -Titulo Original : 2 Pcs MK10 M7 Extruder Nozzle 0.4mm And 2pcs PTFE Tube Kit, For Wanhao FlashForge Creator Pro 2 QIDI Technology Etc 3D Printer Repair Parts Replacement (2-Pack)-Fabricante : Ruimou-Descripcion Original: - * Boquilla extrusora MK10 de 0,4 mm, rosca: rosca de tornillo M7, diámetro: 0,4 mm. Es muy adecuada para impresoras 3D de filamento de 1,75 mm. - * Tubo de PTFE: diámetro interior (ID) 2 mm, diámetro exterior (OD) 4 mm, la longitud es de 71 mm. Rango de temperatura superior 260-280 grados Celsius. - *Compatible con las impresoras 3D FlashForge Creator Pro y Dreamer. Tubos También es adecuado para otras extrusoras que utilicen tubos de politetrafluoroetileno. - *Por lo general, estas piezas se utilizan para solucionar el atasco de papel dentro de la boquilla. - *Paquete: 2 boquillas MK10, 2 tubos de PTFE de 4 mm (longitud de 71 mm) Especificaciones del artículo: material de la boquilla: latón Rosca: M7 Rosca de tornillo Tamaño: 13 mm x 9 mm Diámetro: 0,4 mm, adecuado para suministros de 1,75 mm Tubo de PTFE blanco Resistente a los ácidos, resistente al desgaste, fuerte y resistente Tubo de PTFE: Diámetro interior (ID) 2 mm , Diámetro exterior (OD) 4 mm, Longitud es 71 mm. Rango de temperatura superior 260-280 grados Celsius -- Paquete: 2 boquillas MK10 de 0,4 mm 2 tubos de PTFE de 4 mm (71 mm de longitud) ...
  • Boquilla Micro Swiss Plated para LulzBot TAZ 5 LulzBot Mini
    Precio:  $87,589.00
    Agregar al Carrito   Vista

    Boquilla Micro Swiss Plated para LulzBot TAZ 5 LulzBot Mini

    -Titulo Original : Micro Swiss Plated Nozzle for LulzBot TAZ 5, LulzBot Mini, Hexagon Hotend Style .5mm-Fabricante : MICRO-SWISS-Descripcion Original: Nozzle for LulzBot TAZ 5, LulzBot Mini, Hexagon hotend // Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // Upgrade // Orifice size: .5mm // Made in USA by Micro Swiss // Micro Swiss plated nozzle for LulzBot, M6 thread, 3mm Filament, Hexagon hotend. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Boquilla Micro Swiss resistente al desgaste .4mm
    Precio:  $87,589.00
    Agregar al Carrito   Vista

    Boquilla Micro Swiss resistente al desgaste .4mm

    -Titulo Original : Micro Swiss MK8 Brass Plated Wear Resistant Nozzle (MakerBot, CraftBot, Creality, CR10, Ender, Tevo Tornado) .8mm-Fabricante : MICRO-SWISS-Descripcion Original: Fits: MakerBot Replicator 1, 2 , 2x, Mini, z18​, CraftBot 2, CraftBot PLUS, BQ Witbox, BQ Prusa I3 Hephestos // Plated with TwinClad XT Coating // HIGH LUBRICITY WEAR RESISTANT // Orifice size: .8mm // Made in USA by Micro Swiss // This is MK8 style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Boquilla Micro Swiss resistente al desgaste .5 mm para Robo
    Precio:  $87,589.00
    Agregar al Carrito   Vista

    Boquilla Micro Swiss resistente al desgaste .5 mm para Robo

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle .5mm for Robo 3D - M6 Thread 1.75mm Filament Hexagon (Robo R1/R1 +Plus, Robo C2, Robo R2)-Fabricante : MICRO-SWISS-Descripcion Original: Upgrade nozzle for Robo R1/R1 +PLUS, Robo C2, Robo R2 // Nozzle Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // 1.75mm Filament // Orifice size: .5mm // Made in USA by Micro Swiss // This is Micro Swiss nozzle for Robo 3D Printers, M6 thread, 1.75mm Filament, Hexagon style hotend. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Boquilla Micro Swiss resistente al desgaste .8mm
    Precio:  $87,589.00
    Agregar al Carrito   Vista

    Boquilla Micro Swiss resistente al desgaste .8mm

    -Titulo Original : Micro Swiss MK8 Brass Plated Wear Resistant Nozzle (Creality CR10, Ender / Tevo Tornado, MakerBot) .4mm-Fabricante : MICRO-SWISS-Descripcion Original: USA made Micro-Swiss Plated Brass Wear Resistant Nozzles extend nozzle life dramatically when using abrasive materials. // Ultra-hard coating creates a low friction nozzle that outlasts uncoated brass. Brass base material retains thermal conductivity for unchanged thermal performance. // Fit a large variety of machines, check listing name carefully to make sure it fits your printer, or get in touch with us if you are unsure. // This is MK8 style nozzle, it is made from a 360 brass base material and plated with Twin Clad XT coating. Twin Clad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle. Made in USA by Micro Swiss Fits Makarov Replicator 1 Makarov Replicator 2 Makarov Replicator 2x Makarov Replicator 5th Gen Makarov Replicator Mini Makarov Replicator z18​ Crafton 2 Crafton PLUS BQ Wit box BQ Prusa I3 Hephestos Creality CR-10 Creality CR-10-S5 Creality CR-10-S4 Creality CR-10S Creality CR-10 MINI Ender 2 Ender 3 TronXY X5S Tevo Tornado Anet A8 Alfa wise U20 Alfa wise U30 Snap maker 3-in-1 3D Printer Micro Swiss All Metal Hot end for CR-10 (M2583-04) Micro Swiss All Metal Hot end for CR-10s Pro (M2591-04...
  • Boquilla Micro Swiss resistente al desgaste Boquilla .4mm
    Precio:  $87,589.00
    Agregar al Carrito   Vista

    Boquilla Micro Swiss resistente al desgaste Boquilla .4mm

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle for E3D Volcano Hotend 1.75mm .4mm-Fabricante : MICRO-SWISS-Descripcion Original: Fits: E3D Volcano // Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // 1.75mm Filament // Orifice size: .4mm // Made in USA by Micro Swiss // This is Micro Swiss Plated Wear Resistant nozzle for E3D Volcano hotend. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE codeposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Boquilla Micro Swiss resistente al desgaste Boquilla .6 mm E
    Precio:  $87,589.00
    Agregar al Carrito   Vista

    Boquilla Micro Swiss resistente al desgaste Boquilla .6 mm E

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle .6mm E3D Volcano Compatible 1.75mm Filament-Fabricante : MICRO-SWISS-Descripcion Original: E3D Volcano Compatible Nozzle // Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // 1.75mm Filament // Orifice size: .6mm // Made in USA by Micro Swiss // This is Micro Swiss Plated Wear Resistant nozzle for E3D Volcano hotend. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE codeposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Boquilla Micro Swiss resistente al desgaste Boquilla .8mm
    Precio:  $87,589.00
    Agregar al Carrito   Vista

    Boquilla Micro Swiss resistente al desgaste Boquilla .8mm

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle for E3D Volcano hotend 1.75mm .8mm-Fabricante : MICRO-SWISS-Descripcion Original: E3D Volcano Compatible Nozzle // Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // 1.75mm Filament // Orifice size: .8mm // Made in USA by Micro Swiss // This is Micro Swiss Plated Wear Resistant nozzle for E3D Volcano hotend. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE codeposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Boquilla Micro Swiss resistente al desgaste Boquilla para MK
    Precio:  $87,589.00
    Agregar al Carrito   Vista

    Boquilla Micro Swiss resistente al desgaste Boquilla para MK

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle for MK10 PTFE Lined Hotend .2mm-Fabricante : MICRO-SWISS-Descripcion Original: Fits: FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice Maker Select 3D Printer v2, Cocoon Create 3D Printer // For PTFE lined hotend // Plated with TwinClad XT Coating // Orifice size: .2mm // Made in USA by Micro Swiss // This is MK10 style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE codeposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Boquilla Micro Swiss resistente al desgaste para Boquilla (L
    Precio:  $87,589.00
    Agregar al Carrito   Vista

    Boquilla Micro Swiss resistente al desgaste para Boquilla (L

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle for (LulzBot TAZ 5, TAZ 6, LulzBot Mini, Hexagon Hotend) 0.2mm-Fabricante : MICRO-SWISS-Descripcion Original: Nozzle for LulzBot TAZ 5, LulzBot TAZ 6, LulzBot Mini, Hexagon Hotend // Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // 3mm Filament // Orifice size: 0.2mm // Made in USA by Micro Swiss // This is Plated Wear Resistant Nozzle for LulzBot TAZ 5, TAZ 6, LulzBot Mini, Hexagon Hotend M6 thread, 3mm Filament. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Boquilla Micro Swiss resistente al desgaste para LulzBot 0.3
    Precio:  $87,589.00
    Agregar al Carrito   Vista

    Boquilla Micro Swiss resistente al desgaste para LulzBot 0.3

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle for LulzBot TAZ 5, TAZ 6, LulzBot Mini, Hexagon Hotend .3mm-Fabricante : MICRO-SWISS-Descripcion Original: Nozzle for LulzBot TAZ 5, LulzBot TAZ 6, LulzBot Mini, Hexagon Hotend // Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // 3mm Filament // Orifice size: .3mm // Made in USA by Micro Swiss // This is Plated Wear Resistant Nozzle for LulzBot TAZ 5, TAZ 6, LulzBot Mini, Hexagon Hotend M6 thread, 3mm Filament. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Boquilla Micro Swiss resistente al desgaste para LulzBot 0.8
    Precio:  $87,589.00
    Agregar al Carrito   Vista

    Boquilla Micro Swiss resistente al desgaste para LulzBot 0.8

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle for LulzBot TAZ 5, TAZ 6, LulzBot Mini, Hexagon Hotend .8mm-Fabricante : MICRO-SWISS-Descripcion Original: Nozzle for LulzBot TAZ 5, LulzBot TAZ 6, LulzBot Mini, Hexagon Hotend // Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // 3mm Filament // Orifice size: .8mm // Made in USA by Micro Swiss // This is Plated Wear Resistant Nozzle for LulzBot TAZ 5, TAZ 6, LulzBot Mini, Hexagon Hotend M6 thread, 3mm Filament. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Boquilla Micro Swiss resistente al desgaste para Wanhao 0.3
    Precio:  $87,589.00
    Agregar al Carrito   Vista

    Boquilla Micro Swiss resistente al desgaste para Wanhao 0.3

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle for Wanhao i3 Mini/Monoprice Mini/MP Select Mini/ProFab Mini/Malyan M200 .3mm-Fabricante : MICRO-SWISS-Descripcion Original: Fits: Wanhao i3 Mini / Monoprice Select Mini / Monoprice Mini Delta / ProFab Mini / Malyan M200 // Brass Nozzle Plated with TwinClad XT // Low Friction, High Lubricity // Orifice size: .3mm // Made in USA by Micro Swiss // This nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Boquilla MK8 resistente al desgaste con revestimiento 0.2
    Precio:  $87,589.00
    Agregar al Carrito   Vista

    Boquilla MK8 resistente al desgaste con revestimiento 0.2

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle MK8 MakerBot, CraftBot, BQ Witbox, BQ Prusa I3 Hephestos .2mm (M2549-02)-Fabricante : MICRO-SWISS-Descripcion Original: Fits: MakerBot Replicator 1, 2 , 2x, Mini, z18​, CraftBot 2, CraftBot PLUS, BQ Witbox, BQ Prusa I3 Hephestos // Plated with TwinClad XT Coating // HIGH LUBRICITY WEAR RESISTANT // Orifice size: .2mm // Made in USA by Micro Swiss // This is MK8 style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Boquilla MK8 resistente al desgaste con revestimiento 0.3
    Precio:  $87,589.00
    Agregar al Carrito   Vista

    Boquilla MK8 resistente al desgaste con revestimiento 0.3

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle MK8 MakerBot, CraftBot, BQ Witbox, BQ Prusa I3 Hephestos .3mm (M2549-03)-Fabricante : MICRO-SWISS-Descripcion Original: Fits: MakerBot Replicator 1, 2 , 2x, Mini, z18 , CraftBot 2, CraftBot PLUS, BQ Witbox, BQ Prusa I3 Hephestos // Plated with TwinClad XT Coating // HIGH LUBRICITY WEAR RESISTANT // Orifice size: .3mm // Made in USA by Micro Swiss // This is MK8 style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Boquilla Original E3D V6 1.75mm x 0.40mm V6-NOZZLE-175-400
    Precio:  $67,069.00
    Agregar al Carrito   Vista

    Boquilla Original E3D V6 1.75mm x 0.40mm V6-NOZZLE-175-400

    -Titulo Original : E3D V6 Extra Nozzle - 1.75mm x 0.40mm (V6-NOZZLE-175-400)-Fabricante : E3D-Descripcion Original: pequeño cable recordatorio le recuerda que debe bloquear su motocicleta y le ayuda a recordar que tiene un bloqueo de disco conectado para que no se dispare y dañe su motocicleta, solo necesita conectar el cable recordatorio al disco bloquear y enganchar el manillar FIT ALL DIS BRAKE Lock: simplemente se conecta a la palanca del freno y Disc Lock es un recordatorio visual. Previene daños potenciales y la vergüenza causada por alejarse mientras el disco está activado SUPER ESTIRAMIENTO: debido a la alta elasticidad del cable de más de 120 cm, puede asegurar los bloqueos del disco de freno en cada tipo de motocicleta; Diámetro exterior del cable metálico: aprox. 3,5 mm; Diámetro interno del cable metálico: aprox. 2mm DISEÑO DURADERO Y FLEXIBLE: hecho de material de aleación de PVC + de alta calidad, procesamiento de superficie lisa, buena resistencia al agua, puede garantizar un tiempo de servicio prolongado CABLE MULTIFUNCIONAL: el cable de bloqueo de seguridad práctico no solo es adecuado para el recordatorio de bloqueo del freno de disco, como la seguridad de los frenos, como motocicletas, scooters, cruceros, helicópteros, bicicletas deportivas, bicicletas de carreras, pero también es ideal para la supervivencia, acampar, pescar, amarrar cargas y flejes de equipaje, etc...
  • Boquilla para impresora 3D de 1.75 mm de filamento V5-V6 M6
    Precio:  $45,099.00
    Expira: 21/11/2023
    Agregar al Carrito   Vista

    Boquilla para impresora 3D de 1.75 mm de filamento V5-V6 M6

    -Titulo Original : uxcell 10pcs 3D Printer Nozzle,Brass V6 Nozzle 0.2mm,Extruder Print Head for 1.75mm Filament V5-V6 M6 3D Printer-Fabricante : uxcell-Descripcion Original: Precise Design--The 1.75mm Input 0.2mm extruder nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish. Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer. Excellent Cleaning Needles---The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect to handle tough extruder hot end nozzle clogs. High material---the 3D printer nozzle are made of high quality brass material, Against rust or erosion,sturdy and durable, connect with M6 out thread, easy to install Applicability and compatibility---Fit for External M6 thread connection, compatible with all V5 V6 1.75mm PLA ABS 3D Printers. Note---After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts...
  • Boquilla para UP resistente al desgaste con recubrimiento Mi
    Precio:  $87,589.00
    Agregar al Carrito   Vista

    Boquilla para UP resistente al desgaste con recubrimiento Mi

    -Titulo Original : Micro Swiss Plated Wear Resistant nozzle for UP Box+ / UP300 / Cetus Extruder / Afinia H800+, H800 & H480-02 (.4mm)-Fabricante : MICRO-SWISS-Descripcion Original: Fits: UP Box+ / UP300 / Cetus Extruder / Afinia H800+, H800 & H480-02 // Nozzle Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // Orifice size: .4mm // Made in USA by Micro Swiss // This nozzle will fit UP Plus, UP Mini and the Up Box manufactured after March 2015. Nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle. **** Please note that this nozzle may not fit on older models of the Mini and Plus 2. **...
  • Boquilla RepRap M6 resistente al desgaste con revest. 0.25mm
    Precio:  $87,589.00
    Agregar al Carrito   Vista

    Boquilla RepRap M6 resistente al desgaste con revest. 0.25mm

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle RepRap - M6 Thread 1.75mm .25mm (All Printers with a E3D V4 / V5 / V6 1.75 Hotend/Prusa i3 MK2 / MK2S / MK3)-Fabricante : MICRO-SWISS-Descripcion Original: Fits: E3D V5-V6 Hotend with 1.75mm Filament // Plated with TwinClad XT Coating // HIGH LUBRICITY WEAR RESISTANT // Orifice size: .25mm // Made in USA by Micro Swiss // This is RepRap style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Boquilla RepRap M6 resistente al desgaste con revest. 0.2mm
    Precio:  $87,589.00
    Agregar al Carrito   Vista

    Boquilla RepRap M6 resistente al desgaste con revest. 0.2mm

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle RepRap - M6 Thread 1.75mm .2mm (All Printers with a E3D V4 / V5 / V6 1.75 Hotend/Prusa i3 MK2 / MK2S / MK3)-Fabricante : MICRO-SWISS-Descripcion Original: Fits: E3D V5-V6 Hotend with 1.75mm Filament // Plated with TwinClad XT Coating // HIGH LUBRICITY WEAR RESISTANT // Orifice size: .2mm // Made in USA by Micro Swiss // This is RepRap style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Boquilla RepRap M6 resistente al desgaste con revest. 0.4mm
    Precio:  $87,589.00
    Agregar al Carrito   Vista

    Boquilla RepRap M6 resistente al desgaste con revest. 0.4mm

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle RepRap - M6 Thread 1.75mm .4mm (All Printers with a E3D V4 / V5 / V6 1.75 Hotend/Prusa i3 MK2 / MK2S / MK3)-Fabricante : MICRO-SWISS-Descripcion Original: USA made Micro-Swiss Plated Brass Wear Resistant Nozzles extend nozzle life dramatically when using abrasive materials. // Ultra-hard coating creates a low friction nozzle that outlasts uncoated brass. Brass base material retains thermal conductivity for unchanged thermal performance. // Fit a large variety of machines, check listing name carefully to make sure it fits your printer, or get in touch with us if you are unsure. // This is RepRap style nozzle, it is made from a 360 brass base material and plated with Twin Clad XT coating. Twin Clad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle. *M6 Thread for 1. 75mm filament diameter Made in USA by Micro Swiss Fits All printers with a E3D V4 / V5 / V6 1. 75 Hot end Prusa i3 MK2 / MK2S / MK3 Any cubi...
  • boquillas 0.4mm mk8 nozzles para impresora 3d x 8u
    Precio:  $42,419.00
    Agregar al Carrito   Vista

    boquillas 0.4mm mk8 nozzles para impresora 3d x 8u

    -Titulo Original : Aokin 8 Pcs 0.4mm MK8 Extruder Nozzles 3D Printer Nozzles For Creality Ender 3/3 Pro/3 V2, Ender 5/5 Pro, CR-10/10S, Makerbot, Anet A8 3D Printer-Fabricante : Aokin-Descripcion Original: - El paquete incluye: 8 boquillas extrusoras MK8 para impresora 3D de 0,4 mm. - Compatibilidad: las boquillas MK8 se ajustan a Creality Ender 3/3 Pro, Ender 3 V2, Ender 5/5 Pro, CR-10/10S, Makerbot MK8, Reprap Prusa I3, Tevo Tarantula, Anet A8 y otras impresoras 3D. - Tamaño: las boquillas de la impresora 3D MK8 - Diámetro del filamento: 1,75 mm, Diámetro de salida: 0,4 mm, Rosca del tornillo: M6, Diámetro del hexágono: 6 mm. - Material: las boquillas de la impresora 3D están hechas de latón de primera calidad, resistentes y resistentes a altas temperaturas, seda suave, se conectan con rosca M6, fáciles de usar. - Las boquillas de impresora 3D Aokin utilizan materias primas de alta calidad y mano de obra fina. El paquete incluye: Boquilla extrusora MK8 para impresora 3D de 8 x 0,4 mm Makerbot MK8, Reprap Prusa I3, Tevo Tarantula, Anet A8 y otras impresoras 3D. Nota: Después de reemplazar la boquilla, vuelva a calibrar la distancia entre la boquilla y la placa de construcción para garantizar la calidad de las piezas de impresión...
  • boquillas 0.8mm mk8 nozzles para impresora 3d x 8u
    Precio:  $42,419.00
    Agregar al Carrito   Vista

    boquillas 0.8mm mk8 nozzles para impresora 3d x 8u

    -Titulo Original : Aokin 8 Pcs 0.8mm MK8 Extruder Nozzles 3D Printer Nozzles For Creality Ender 3/3 Pro/3 V2, Ender 5/5 Pro, CR-10/10S, Makerbot, Anet A8 3D Printer-Fabricante : Aokin-Descripcion Original: - El paquete incluye: 8 boquillas extrusoras MK8 para impresora 3D de 0,8 mm. - Compatibilidad: las boquillas MK8 se ajustan a Creality Ender 3/3 Pro, Ender 3 V2, Ender 5/5 Pro, CR-10/10S, Makerbot MK8, Reprap Prusa I3, Tevo Tarantula, Anet A8 y otras impresoras 3D. - Tamaño: las boquillas de la impresora 3D MK8 - Diámetro del filamento: 1,75 mm, Diámetro de salida: 0,8 mm, Rosca del tornillo: M6, Diámetro del hexágono: 6 mm. - Material: las boquillas de la impresora 3D están hechas de latón de primera calidad, resistentes y resistentes a altas temperaturas, seda suave, se conectan con rosca M6, fáciles de usar. - Las boquillas de impresora 3D Aokin utilizan materias primas de alta calidad y mano de obra fina. El paquete incluye: Boquilla extrusora MK8 para impresora 3D de 8 x 0,8 mm Makerbot MK8, Reprap Prusa I3, Tevo Tarantula, Anet A8 y otras impresoras 3D. Nota: Después de reemplazar la boquilla, vuelva a calibrar la distancia entre la boquilla y la placa de construcción para garantizar la calidad de las piezas de impresión...
  • Boquillas E3D ExcelFu M6 0.4mm Bronce Boquilla Extrusora Cab
    Precio:  $56,809.00
    Agregar al Carrito   Vista

    Boquillas E3D ExcelFu M6 0.4mm Bronce Boquilla Extrusora Cab

    -Titulo Original : E3D Nozzles, ExcelFu M6 0.4mm Brass Nozzle Extruder Print Head for 1.75mm Filament E3D V5-V6 3D Printer, Pack of 20-Fabricante : EXCELFU-Descripcion Original: Material: brass // Installation: external M6 thread connection // Diameter: input: 1.75mm, output: 0.4mm // Compatible: all 1.75mm PLA abs printer // Quantity: 20 pcs 0.4mm M6 3D Printer nozzles // ExcelFu M6 0.4mm Brass Nozzle Extruder Nozzle Print Head for 1.75mm Filament E3D V5-V6 3D Printer, Pack of 20 Material: brass Thread type: M6 Input diameter: 1.75mm Output diameter: 0.4mm Quantity: 20 pieces 20x 0.4mm Brass 3D Printer Nozzle These 3D printer heads are small parts, please keep them away from children to avoid swallow risk...
Mostrar del 49 al 72 (de 137 productos)
Páginas de Resultados: [<< Anterior]   1  2  3  4  5 ...  [Siguiente >>] 
Destacados
Revisar todos destacados

Información

Información

Nuestras ofertas

Nuestras ofertas

Su cuenta

Su cuenta

Mantente conectado

Mantente conectado

Contáctenos

Contáctenos

elbazardigital.com   © 2024