Arriba

Impresión > Impresión 3D > Picos Nozzle

Mostrar: 
Mostrar del 1 al 24 (de 188 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Boquilla Micro Swiss resistente al desgaste para Wanhao 0.3
    Precio:  $4,959.00

    Boquilla Micro Swiss resistente al desgaste para Wanhao 0.3

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle for Wanhao i3 Mini/Monoprice Mini/MP Select Mini/ProFab Mini/Malyan M200 .3mm-Fabricante : MICRO-SWISS-Descripcion Original: Fits: Wanhao i3 Mini / Monoprice Select Mini / Monoprice Mini Delta / ProFab Mini / Malyan M200 // Brass Nozzle Plated with TwinClad XT // Low Friction, High Lubricity // Orifice size: .3mm // Made in USA by Micro Swiss // This nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Paquete económico de Boquilla para resistente al desgaste ch
    Precio:  $18,789.00

    Paquete económico de Boquilla para resistente al desgaste ch

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle for (LulzBot TAZ 5, TAZ 6, LulzBot Mini) Value Pack-Fabricante : MICRO-SWISS-Descripcion Original: Nozzles for LulzBot TAZ 5, LulzBot TAZ 6, LulzBot Mini, Hexagon Hotend // Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // 3mm Filament // Orifice size: .3mm, .4mm, .5mm, .6mm, .8mm, 1.2mm // Made in USA by Micro Swiss // This is Plated Wear Resistant Nozzles for LulzBot TAZ 5, TAZ 6, LulzBot Mini, Hexagon Hotend M6 thread, 3mm Filament. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzles. This Value Pack includes orifice sizes: .3mm, .4mm, .5mm, .6mm, .8mm, 1.2m...
  • Luter 20 Un. Printer 3d Boquilla 0.4mm Mk8 Boquilla Extrusor
    Precio:  $2,979.00

    Luter 20 Un. Printer 3d Boquilla 0.4mm Mk8 Boquilla Extrusor

    -Titulo Original : LUTER 20PCS 0.4mm 3D Printer Nozzles MK8 Extruder Nozzles + 5 PCS Stainless Steel Nozzle Cleaning Needles for Makerbot Creality CR-10-Fabricante : LUTER-Descripcion Original: Prime Quality--The 3D printer nozzles are made of high quality brass, the nozzle cleaning needles are made of premium stainless steel. Heavy duty and provide a long service life. // Precise Design--The 0.4mm extruder nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish. Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer. // Excellent Cleaning Needles--The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect to handle tough extruder hot end nozzle clogs. // Useful Combination--The needles are designed for 0.4mm 3D printer nozzles including such as Makerbot Creality, CR-10, Ender 2, Ender 3, etc. The needles are also suitable for everything used as a nozzle. // Package Include--20 x 0.4mm 3D printer nozzles, 5 x nozzle cleaning needles, 1 x transparent storage box // Keep your 3d printer nozzles clean! No more annoying extruder nozzle clogs! A must have for every 3D printer hobbyist Suitable for everything used as a nozzle, such as Air Brush, Water Sprinkler Nozzle, Garden Hose, Shower Head, dishwasher nozzles and so on Nozzle Parameter: Input diameter 1.75mm, output diameter 0.4mm, screw thread:M6, hexagon diameter:6mm Color:Golden Nozzle+Silver Needles Product Weight:70g Package Weight:184g Package Size:12.5cm*8.5cm*1.9cm 20 x 0.4mm 3D printer nozzles 5 x nozzle cleaning needles 1 x transparent storage box Please keep away from children. Cleaning the nozzles untill the nozzle is heated over 200 degrees....
  • Conector Bowden Biqu Pc4-m10 Macho Para Impresora 3d [10un]
    Precio:  $2,679.00

    Conector Bowden Biqu Pc4-m10 Macho Para Impresora 3d [10un]

    -Titulo Original : BIQU PC4-M10 Male Straight Pneumatic PEFE Tube Push for E3D-V6 Fitting Connector Bowden Extruder 3D Printer (Pack of 10pcs)-Fabricante : BIQU-Descripcion Original: 10 x conector rápido recto macho neumático PC4-M10 para impresora 3D extrusora bowden de larga distancia E3D-V6 Diámetro exterior del tubo de PTFE: 4 mm. Hilo: 6 mm La parte superior (negra) se puede insertar con un tubo de PTFE de 4 mm y autoblocante Hecho de acero inoxidable de alta calidad, resistente a la oxidación y al óxido, aumenta la vida útil Buenos accesorios y alto rendimiento...
  • PrimaCreator PC NMP 2468H MK10 MK10 Tamaño mixto x 0,20 mm 1
    Precio:  $10,459.00

    PrimaCreator PC NMP 2468H MK10 MK10 Tamaño mixto x 0,20 mm 1

    -Titulo Original : PrimaCreator PC-NMP-2468H-MK10 MK10 Mixed Size x 0.20mm, 1 x 0.40mm, 1 x 0.60mm, 1 x 0.80mm, Hardened Steel Nozzle-Fabricante : PRIMACREATOR-Descripcion Original: Premium high-quality nozzle for perfect prints " not to be compared with cheap Chinese nozzles made of low end material in old worn machinery. We only use the best // Manufactured with extreme precession tolerance of only 0.01 mm. Quality is controlled in every step of production to ensure a 100 percent perfect nozzle. Each nozzle is cleaned in ultrasonic bath // Hardened steel nozzle perfect for demanding and abrasive filaments like carbon, metal and glow in the dark. With a hardened steel nozzle, you don´t have to worry about your nozzle wearing out // Mk10 style nozzle with M7 thread for 1.75Mm filaments fits printers like wanhao I3, I3 plus, D4, D6, qiditech, flash forge dreamer, creator, finder, monoprice maker select, cocoon create, etc.¦ // What you get: 1 x 0.20Mm, 1 x 0.40Mm, 1 x 0.60Mm, 1 x 0.80Mm - Mk10 hardened steel nozzle (total 4Pcs nozzles) // Size:  |  Style: Fits to: Wanhao I3, D4, D6, qidi tech, Flash Forge dreamer, creator, Finder, monoprice Maker Select, cocoon create, qidi tech the premium nozzles from PrimaCreator are a Series of replacement nozzles that can make more difference for the result than you may Think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. All nozzles from PrimaCreator are made from the best high-quality Brass or steel (depending on Type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints. For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it's time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don't get the same results. After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation. The nozzle will now take shape with millimeter precision, the tolerance is less than 0.01 mm. The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. The nozzles are then checked for one last time and packed individually in a protective box “ ready to be shipped to you...
  • Micro Swiss Plated A2 Hardend Tool Acero Boquilla RepRap 0.6
    Precio:  $6,429.00

    Micro Swiss Plated A2 Hardend Tool Acero Boquilla RepRap 0.6

    -Titulo Original : Micro Swiss Plated A2 Hardend Tool Steel Nozzle RepRap - M6 Thread 1.75mm Filament .6mm (E3D V5 V6 / Prusa i3 MK2)-Fabricante : MICRO-SWISS-Descripcion Original: A2 Hardened Tool Steel Nozzle Plated with TwinClad XT // Fits: E3D 1.75mm Hotend V5-V6, Prusa i3 // 1.75mm Filament / M6 Threads // Orifice size: .6mm // Made in USA by Micro Swiss // This is RepRap style nozzle, it is made from a A2 Tool Steel, heat treated to 57-62 RC and plated with TwinClad XT coating. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • 3 protectores de silicona MK8/MK9 CR-10,10S,S4,S5,Ender 3
    Precio:  $2,449.00
    Expira: 14/02/2021

    3 protectores de silicona MK8/MK9 CR-10,10S,S4,S5,Ender 3

    -Titulo Original : Pscco 3pcs Heater Block Silicone Cover Black Protective Case Mk8/mk9 Hotend For Creality Cr-10,10s,s4,s5,ender 3,anet A8,3d Printer Accessories-Fabricante : Pscco-Descripcion Original: MARCADOR DE PUNTAS DOBLES: puntas gemelas amplias y finas para resaltar, dibujar y subrayar con precisión. Los marcadores finos se pueden usar para escribir y enganchar líneas, mientras que los marcadores gruesos son adecuados para dibujar y colorear. 88 COLORES VIBRANTES: los marcadores a base de agua tienen colores brillantes y buena transparencia. El marcador nunca se desvanecerá con el tiempo. Cada color es atractivo, lo que puede agregarle un toque de creatividad y diversión. 88 colores vivos pueden satisfacer todas sus necesidades. REGALO PERFECTO: el juego de rotuladores está equipado con un hermoso estuche negro que es fácil de transportar, viajar y almacenar. También es un regalo de Navidad ideal para niños, adolescentes, adultos, estudiantes, maestros, etc. USOS ILIMITADOS: los marcadores a menudo se usan para pintar en papel de cartulina más apretado o papel recubierto. Además, se puede utilizar en expresiones de arquitectura, interiorismo, diseño industrial y diseño de productos pintados a mano. SEGURO Y NO TÓXICO: 100% seguro para niños a partir de 3 años. Cada marcador no es tóxico. Los marcadores de alcohol de color Vigorfun 88 son permanentes y coloridos con puntas de doble cara. Los rotuladores son atractivos, los colores son brillantes y nunca se desvanecen. Los marcadores se pueden utilizar ampliamente, como papel para tarjetas, papel recubierto, diseño industrial, diseño de productos, etc. No solo pueden dibujar y colorear, sino también resaltar, dibujar y subrayar. Además, son seguros y no tóxicos, un gran regalo para niños, adolescentes y adultos. Caracteristicas Puntas de cincel ancho y punta fina Forma cuadrada del barril Fluido suave Cada marcador tiene su nombre y número de color El juego viene con una tarjeta de color. Todo viene en una hermosa bolsa negra con soporte Especificaciones 1.Marca: Vigorfun 2.Tamaño de los marcadores: 6.9 x 5.5 x 6.7 pulgadas (17.5 x 14 x 17 cm) 3.Marcadores de peso: 3,4 libras (1,56 kg) 4.Color: 88 colores. 5.Paquete: bolsa negra con soporte 6.Ingredientes: 64% de etanol anhidro, 18% de resina, 10% de disolvente negro, 8% de propilenglicol monometiléter 7.Usos: papel, tela, zapatos, artesanías, paredes, vidrio, piedra, madera, etc. CONSEJOS 1. Retirar la tapa no más de una hora. 2. Se recomienda cubrir la tapa inmediatamente después del uso: los marcadores no estarán secos; el color no se mezclará; larga vida útil 3. Si el marcador está seco, cubra la tapa y espere más de diez minutos...
  • Anet Sensor De Posicion De Nivelacion Automatica Para Impres
    Precio:  $3,759.00

    Anet Sensor De Posicion De Nivelacion Automatica Para Impres

    -Titulo Original : Anet Auto Leveling Position Sensor for Anet A8 3D Printer, Upgrade Auto Self-Leveling Heatbed Position Adjustment Inductive Proximity Sensor with Mounting Plate and Screws-Fabricante : ANET-Descripcion Original: Suits for auto-leveling Anet A8 3D printer. // Pretty solution for auto-adjusting heatbed level. // Comes with mounting plate & screws, pre-soldered connector. // Anti-jamming three-wire, 140cm / 55.1in cable // 10-30V DC working voltage, output NPN.NO. // Overview: 1. 3d printer waterproof anti-jamming DC three-wire npn often open square inductive metal sensor proximity switch sensor 10-30v. 2. This is an auto level sensor for the Anet A8 or other Prusa i3 Models. 3. Easy installation, just unplug the original z stop and plug in sensor and screw into the back of printer. 4. Need to flash official firmware to make this function. Specifications: Suits for: Auto-leveling Anet A8 3D printer Model: Automatic leveling sensor Wire Type: DC 3 Wire Type(Brown, Black, Blue) Working Voltage : DC 10-30VDC or less Sensor Size: 1.8 * 1.8 * 3.6cm / 0.7 * 0.7 * 1.4in(W*H*L) Cable Length: 145cm / 57in Output mode: NPN three-line normally open Output current: 300 mA (mA) Package Weight: 67g / 2.4oz Package include: 1 * Proximity Sensor 1 * Plate 2 * Screw This auto-leveling device can only be used on Auto-leveling Anet A8, other 3D printers are compatible, need your own control parameters, and to confirm whether the machine has automatic leveling function. This product is not 100% compatible with other brands of 3D printers...
  • Balitensen Printer 3d Acero Mk10 Boquilla Extrusora 0.4mm M7
    Precio:  $2,789.00

    Balitensen Printer 3d Acero Mk10 Boquilla Extrusora 0.4mm M7

    -Titulo Original : BALITENSEN 3D Printer Stainless MK10 Extruder Nozzle 0.4mm M7 Thread for CTC Wanhao Flashforge Dremel 1.75mm Filament ABS PLA(Pack of 5)-Fabricante : BALITENSEN-Descripcion Original: Sizes are engraved on nozzlese. For 1.75MM Filament. M7 Thread Fits many extruders including Makerbot RepRap Prusa i3. Compatible with the Original Replicator (wooden), Replicator 2, Replicator 2X. Recommended for use with abrasive or clog-prone filaments. Material: Stainless Steel Size: 13 x 9mm Nozzle ID: 0.3mm Screw OD: 9mm Net Weight: 4g/pcs 5 x MK10 Nozzle 0.4m...
  • Aokin 8 Un. Printer 3d Mk10 Boquillas M7 Bronce Extrusora Ca
    Precio:  $2,269.00

    Aokin 8 Un. Printer 3d Mk10 Boquillas M7 Bronce Extrusora Ca

    -Titulo Original : Aokin 8 Pcs 3D Printer MK10 Nozzles, M7 Brass Extruder Head Hotend Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm fit 1.75mm Filament 3D Printer Wanhao Duplicator D4/I3/Dremel QIDI Makerbot 2-Fabricante : AOKIN-Descripcion Original: Compatibility: the printer nozzles fit for FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, etc. // Package include: totally 8 pcs MK10 M7 Extruder Nozzle, 7 sizes: 1 x 0.2mm, 1 x 0.3mm, 2 x 0.4mm, 1 x 0.5mm, 1 x 0.6mm, 1 x 0.8mm, 1 x 1.0mm. // Size: the 3D printer nozzles, Out Thread: M7, Filament Diameter: 1.75mm, Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm. // Material: the 3D printer nozzles are made of premium brass, sturdy and high temperature resistance, smooth silk, connect with M7 out thread, easy to use. // Aokin 3D printer nozzles use high quality raw materials and fine workmanship, if you have any question for our product, please feel free to contact us, we will do our best for you. // 1x 0.2mm 3D printer nozzles1x 0.3mm 3D printer nozzles2x 0.4mm 3D printer nozzles1x 0.5mm 3D printer nozzles1x 0.6mm 3D printer nozzles1x 0.8mm 3D printer nozzles1x 1.0mm 3D printer nozzlesMaterial: BrassOut Thread: M7Filament Diameter: 1.75mmOutput Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mmCompatibility: FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, etc...
  • CCTREE 10 un. MK8 Boquilla Extrusora para Printer 3D Makerbo
    Precio:  $2,789.00

    CCTREE 10 un. MK8 Boquilla Extrusora para Printer 3D Makerbo

    -Titulo Original : CCTREE 10pcs MK8 Extruder Nozzle for 3D Printer Makerbot Creality CR-10 Ender 3 5 Different Size 0.2mm, 0.4mm.0.6mm.0.8mm,1.0mm-Fabricante : CCTREE-Descripcion Original: Input Diameter :1.75mm // Output Diameter: 0.2mm,0.4mm,0.4mm.0.6mm.0.8mm,1.0mm // Material: Copper (Brass) // 10Pcs Extruder Brass Nozzle // 5 different size (each size 2pcs) // Specification:13mm*6mm Material: Brass of National standard Weight:2g Nozzle Precision:0.2mm/0.4mm/0.6mm/0.8mm/1.0mm Hexagon Diameter:6mm Screw Thread :M6 Input Diameter: 1.75mm Package Included: 10x nozzles Size:0.2mm,0.4mm,0.6mm,0.8mm,1.0mm Each size 2pc...
  • Kweiny Mk10 Boquilla Para Printer 3d Makerbot Piezas Y Extru
    Precio:  $3,709.00

    Kweiny Mk10 Boquilla Para Printer 3d Makerbot Piezas Y Extru

    -Titulo Original : Kweiny MK10 Nozzle for 3D Printer Makerbot Parts and Extruder Cleaning Tools Kit | M7 Thread 0.4mm Brass Nozzle 5 Pieces and 2PCS Drill Bit for It-Fabricante : KWEINY-Descripcion Original: Brass material advantage: The heat conductivity of brass is 7 times as high as that of stainless steel. MK10 hotend structure only allows filament to have little contact with the nozzle. The material of the nozzle must be brass to ensure filament's temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of stainless steel is so poor, it is unscientific and irrational used on MK10 nozzle. // Compatibility: Fit with MK10 hotend M7 thread aluminum heater block, such as FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, FlashForge Finder, FlashForge Inventor, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice maker select plus, Qidi tech, Cocoon Create, etc. // Quantity and specification: M7 thread 0.4mm nozzle 5 pieces. 0.4mm Nozzle cleaning drill bit 2 pieces. For detailed dimensions, please refer to the drawings in the upper left. // Material: Nozzle is brass. Nozzle cleaning drill bit is stainless steel SUS304. // Durability: Nozzle cleaning drill bit can be used heaps of times, because of SUS304 stainless steel material. It will neither rust nor be broken, no matter how it is used.You only need one to solve all the same size nozzles blockage problems. // 1. After replace the nozzle, Please recalibrate the distance between nozzle and build plate to ensure the quality of print parts; 2. Don't use the needle to clean until the nozzle is heated to above 200℃(392℉).You can twist the needle to make it easier to clean up; 3. Sharp parts, please keep away from children. MK10 hotend M7 thread aluminum heater block; 0.4mm; 1.75mm/3mm; M7; Brass. 0.4mm nozzle; 0.4mm*1PCS, 0.35mm*1PCS; 70mm/2.76in; Stainless steel SUS304. 5 pieces; 2 pieces...
  • Impresora 3d Mk8 Boquilla Con 10 Un. Kit De Agujas De Limpie
    Precio:  $3,099.00

    Impresora 3d Mk8 Boquilla Con 10 Un. Kit De Agujas De Limpie

    -Titulo Original : 3D Printer MK8 Nozzle with 10PCS Cleaning Needles Kit, 20pcs 0.4mm Nozzle + 2pcs (0.2 0.3 0.5 0.6 0.8 1.0mm) Brass MK8 Extruder Head Hotend Nozzle 1.75mm Filament for Creality Cr-10 Makerbot Anet A8-Fabricante : UMLIFE-Descripcion Original: ❃❃ Universal, precision machined brass nozzles for use extruding with most 3D printers. // ❃❃ Diameter: input diameter: 1.75mm; output diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm. // ❃❃ This extruder brass nozzle print head with lettering, and the screw head connection which can be well connected to the other end. // ❃❃ The nozzles surfaces are glossy, the chamfers and internal face are rounded and smooth which can reduce the resistance and avoid blocking of the filament, the contact surface can prevent the leakage from the nozzles // ❃❃ Great nozzle replacement for Prusa i3, Anet A6 3D-printer, Wanhao 3D-printers, MakerBot Replicator 2, MakerBot Replicator 2x, MakerBot 5th Generation, etc. // A proper nozzle is one of the most integral components to getting the 3D prints you want. A nozzle may suffer normal wear and tear, either through internal striations from course materials or external damage from contact with your 3D printer’s build plate.Brass, as an excellent conductor of heat, is an ideal material for a 3D printer nozzle. This part is machined from brass metal alloy. With an input diameter of 1.75 millimeters, it will thread into the existing heater block and thermal barrier tube hot end assembly. Material: BrassInput Filament Diameter: 1.75mmScrew Diameter: 6mmWeight: About 2g/eachNozzle diameter: sizes include 0.2mm,0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm 2PCS X 0.2mm MK8 Nozzle2PCS X 0.3mm MK8 Nozzle2PCS X 0.5mm MK8 Nozzle2PCS X 0.6mm MK8 Nozzle2PCS X 0.8mm MK8 Nozzle2PCS X 1.0mm MK8 Nozzle 2PCS X 0.2mm Cleaning Needle2PCS X 0.3mm Cleaning Needle2PCS X 0.4mm Cleaning Needle2PCS X 0.6mm Cleaning Needle2PCS X 0.8mm Cleaning Needl...
  • Micro Boquilla suiza resistente al desgaste Boquilla para Cr
    Precio:  $4,959.00

    Micro Boquilla suiza resistente al desgaste Boquilla para Cr

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle for Creality CR-10s PRO Original hotend ONLY (M6x.75mm Threads) .6mm-Fabricante : MICRO-SWISS-Descripcion Original: Fits: CR-10S PRO Original Hotend // Orifice size: .6mm // M6x.75mm Threads // Plated with TwinClad XT Coating // Made in USA by Micro Swiss // This is Plated Wear Resistant Nozzle for Creality CR-10s PRO Original hotend only. It has fine M6x.75mm threads. Nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. The TwinClad XT coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle. CR-10 Pro CR-10S Pro...
  • Boquilla MK8 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm
    Precio:  $2,489.00
    Expira: 24/02/2021

    Boquilla MK8 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm

    -Titulo Original : SIQUK 22 Pieces 3D Printer Nozzles MK8 Nozzle 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box for 3D Printer Makerbot Creality CR-10-Fabricante : SIQUK-Descripcion Original: Package include: totally 22 pcs MK8 nozzles in 7 sizes, 2 x 0.2mm, 2 x 0.3mm, 10 x 0.4mm, 2 x 0.5mm, 2 x 0.6mm, 2 x 0.8mm, 2 x 1.0mm Parameter: input diameter 1.75mm; output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm; out thread: M6 Applicability and compatibility: fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer Premium material: the 3D printer nozzles are made of high quality brass material, sturdy and durable, connect with M6 out thread, easy to install Attention: small accessories, please keep away from childre...
  • Anet Motor Paso A Paso De 42 Para Impresora 3d Diy Cnc Robot
    Precio:  $4,829.00

    Anet Motor Paso A Paso De 42 Para Impresora 3d Diy Cnc Robot

    -Titulo Original : Anet 42 Stepper Motor for 3D Printer DIY CNC Robot, 1.8 Degree 0.9A 0.4N.M 42mm Stepper Stepping Motor Drive with 90cm Lead Cable for 3D Printer - Black (1PCS)-Fabricante : ANET-Descripcion Original: This item is a stepper motor, with 90cm 4 pin cable for convenient use. // Suitable for 3D printer replacement (All Anet 3d printer is suitable, such as Anet A8 3d printer, A6 3d printer, E12 3d printer, E10 3d printet etc.). // It's good ideal for 3D printers, as well as CNC and robotics applications. // Step Angle: 1.8 Degree // Frame Size: 42.3 * 42.3 * 38mm // Feature: Apply for 3D printer, machinery and equipment. 1.8 degree step angle, 0.4N.M holding torque. Motor size: 42 * 42 * 38mm. Lower noise and running temperature. Comes with a 90cm connecting cable. Specifications: Material: Metal Step Angle: 1.8 Degree Phase: 2 Voltage: 3.96V Current: 0.9A Holding Torque: 0.4N.M Lead: 4 Lead Length: 90cm / 35.4in Frame Size: 42.3 * 42.3 * 38mm Shaft Diameter: 5mm Item Weight: 276g / 9.8oz Package Size: 5 * 5 * 8cm / 2.0 * 2.0 * 3.1in Package Weight: 280g / 9.9oz Package List: 1 * Step Motor 1 * Cable Warning: Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor...
  • Piezas de la Printer 3D Extrusoras de la Printer 3D Kits de
    Precio:  $6,189.00

    Piezas de la Printer 3D Extrusoras de la Printer 3D Kits de

    -Titulo Original : 3D Printer Parts 3D Printer Extruders Hot End Assembled Extruder Kits 1.75mm Filament Direct Feed 0.4mm Nozzle for Ender 5 3D Printer 3D Printer Parts 3D Printer Extruders Hot End-Fabricante : DCSW-Descripcion Original: [WORKS GREAT] This hot end replaced the original perfectly, the hot end was easy to get operational with minimum soldering. Print quality is great. 3D Printer Parts 3D Printer Extruders Hot End // [GOOD FOR Ender 5 3d Printer] Great hot-end. This hot end used a 24v version on Ender 5 3d printer. 3D Printer Parts 3D Printer Extruders Hot End // [3D PRINTER PARTS] Metal V6 compatible hotend for 1.75mm filament, 0.4mm nozzle. 3D Printer Parts 3D Printer Extruders Hot End // [HIGH TEMPERATURE RESISTANCE] This hot end can reach over 230C, for high temperature performance. 3D Printer Parts 3D Printer Extruders Hot End // [HIGH TEMPERATURE RESISTANCE] This hot end can reach over 230C, for high temperature performance. 3D Printer Parts 3D Printer Extruders Hot End // This hot end is a replica of the newest, popular V6 hotend, this hot end not only allows  you to print extremely high temperature materials like PP/ Polycarbonate and Nylons  but also eliminates typical hotend meltdown failures associated with other types of hotends. Hot End 100% original and high quality 3D Printer accessories for Ender 5 The Hot End work with different sizes of MK10 nozzle: 0.2mm 0.3mm 0.4mm nozzle MK10 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W The Hot End Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon) The Hot End Material: Aluminum & Stainless Steel & Brass The Hot End Installation type: external thread connection The Hot End Scope of application: 3D printer The Hot End Nozzle size: 0.4mm The Hot End Throat pipe length: 30mm The Hot End Aluminum block size: 20 mm x 20 mm x 10 mm Operating temperature range: -40 ~ +260°C The Hot End  Note for the Hot End: Installation under the guidance of professionals if you can not install the Hot End Keyword: Hot End Heating Block Assembled Extrude...
  • Herramienta de acabado de impresión y modificación 3D
    Precio:  $19,189.00

    Herramienta de acabado de impresión y modificación 3D

    -Titulo Original : KINGTOOL Cordless 3D Printer Accessories Tool Kit, 3D Printing/Modify Finishing Tool, Cleaning Needle, Scarper, Clean up Knives, Carving Knife-Fabricante : KINGTOOL -Descripcion Original: Diseñado para terminar, reparar y modificar piezas impresas en 3D 10 seg. listo para empezar. Funciona con materiales plásticos de impresión 3D Ligero, compacto y fácil de usar Alimentado por USB, 12 W 7 puntas intercambiables: aguja, cuchillo, pala, punta, detallado, abolladura, suavizad...
  • Extrusor Metalico Para Ender 2/3/5 Crealty Cr-10 Micro Swiss
    Precio:  $20,539.00

    Extrusor Metalico Para Ender 2/3/5 Crealty Cr-10 Micro Swiss

    -Titulo Original : Micro Swiss All Metal Hotend Kit for Creality CR-10 / CR10 / CR10S / Ender 2 / Ender 3 Ender 5 Printers .4mm-Fabricante : Micro Swiss-Descripcion Original: Se adapta a: Creality CR-10 / CR-10S / CR-10-S5 / CR-10 MINI / CR-10-S4 / Ender 2 / Ender 3 / Ender 3 / TronXY X5S Tamaño del orificio: .4 mm El kit incluye: bloque de enfriamiento de aluminio, rotura de calor de titanio de grado 5, bloque calentador de aluminio, boquilla de 4 mm resistente al desgaste chapada en latón MK8, calcetín de silicona Este es un kit de conversión totalmente metálico para impresoras CR-10 Hecho en EE. UU. Por Micro Swis...
  • Hawkung 42 Un. Printer 3d Accesorios Kit 10 Boquilla + 3 Blo
    Precio:  $5,579.00

    Hawkung 42 Un. Printer 3d Accesorios Kit 10 Boquilla + 3 Blo

    -Titulo Original : HAWKUNG 42 Pcs 3D Printer Accessories Kit, 10 Nozzle + 3 Heater Block + 3 Throat Tube + 3 MK8 Silicone Socks + 10 Cleaning Needle + Other Parts Compatible with MK8 Makerbot Anet A8 Reprap Hotend-Fabricante : HAWKUNG-Descripcion Original: Cleaning needle: 10 flexible stainless steel needles for gentle maintenance of your nozzles and difficult to reach places such as feed gears. // MK8 nozzles: Material: brass,Thread type: M6, Output diameter: 0.4 mm; Input filament diameter: 1.75mm, Compatible with 3D printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, and fit for all 1.75 mm PLA ABS 3D printer, Supported: ABS / PLA / PETG / Carbon Fiber // Spanners: Nozzle spanner make nozzle installation and removal easier. Suitable for nozzles with a diameter of 6mm, such as MK8 nozzles, E3D V5 V6 nozzles, etc. Heating block spanner only fit for MK8 heat block. Allen wrench makes mounting and dismounting small screws easier. // Tweezers: 3D printing tweezers are suitable for maintenance nozzles and cleaning excess support material; it is anti-static, non-magnetic precision tweezers. // Silicone socks: Will keep your heater block clean and free from burnt and blackened plastic.Helps to keep the hotend temperature extremely stable, particularly if you use high-airflow cooling around the nozzle to cool the print. // Size: Color: gold Material:brass Thread type: M6 Output diameter:0.4 mm;Input filament diameter:1.75mm Compatible: 3D printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, and fit for all 1.75 mm PLA ABS 3D printer Supported:ABS/PLA/PETG/Carbon Fiber Type: nozzle neck Material: stainless steel Length: 30mm External thread: M6 Nozzle throat outer diameter: 7mm Nozzle throat inside diameter: 2mm Filament diameter: 1.75mm Material: aluminum Dimensions: 20 x 20 x 10mm (L * W * H) Compatibility: MK7, MK8 3D Printer Material: Silicone Color: blue Suitable for heat block size: 20 x 20 x 10mm Material: PTFE (Poly Tetra Fluoro Ethylene) Size: outside diameter: 4mm, inside diameter: 2mm Color: white Length: 1m The density is 2.15-2.20g/cm3 and the heat resistance is so nice so that it's temperatures can up to 260℃ PTFE Tubing OD: 4mm Thread: M6/3mm Material: Copper, Plastic Color:golden+blue PTFE Tubing OD: 4mm Thread: M10/6mm Material: stainless steel,Plastic Color:black+silver 10 x 0.4mm MK8 brass nozzle 3 x Aluminum heater block 3 x Extruder throat tube 3 x MK8 silicone socks 5 x 0.35mm Cleaning needle 5 x 0.4mm Cleaning needle 2 x PC4-M6 quick fitting 2 x PC4-M10 straight pneumatic fitting 2 x Palette Knife 2 x Allen wrench 2 x Tweezers 1 x Nozzle spanner 1 x Heater block spanner 1 x 1 M teflon tub...
  • Volcán genuino E3D de acero endurecido Boquilla 1.75 mm x 0.
    Precio:  $7,369.00

    Volcán genuino E3D de acero endurecido Boquilla 1.75 mm x 0.

    -Titulo Original : Genuine E3D Hardened Steel Volcano Nozzle - 1.75mm x 0.40mm (VOLCANO-NOZZLE-HS-175-0400)-Fabricante : E3D-Descripcion Original: Sindoh // Nozzle // 3Dwox Dp200 3D printer // 3Dwox Dp200/1 nozzle (Dp200 and 3Dwox 1 only). 3Dwox Dp200/1 nozzle helps users build better models with rigid materials such as PLA and ABS...
  • tubo Barrel impresora 3d MK8 1.75mm (M6x40mm) 5 unidades
    Precio:  $3,139.00

    tubo Barrel impresora 3d MK8 1.75mm (M6x40mm) 5 unidades

    -Titulo Original : 3D Printer Extruder Tube,5pcs Stainless Steel M6 Nozzle Throat PTFE Tube Accessary For 3D Printer MK8 Extruder 1.75mm (M6x40mm)-Fabricante : Hilitand-Descripcion Original: Especificaciones: Nuevo | Tipo de batería: Ni-MH | Voltaje de la batería: 14,4 V | Capacidad: 4000 mAh. (SUSTITUYA LA BATERÍA DE ROOMBA, NO ORIGINAL) Compatibilidad: Totalmente compatible con Roomba Serie R3 500,600,700,800 Series 500 510 530 531 532 535 536 540 550 552 560 570 580 595 600 620 650 660 700 760 770 780 790 800 870 (No compatible con las series Roomba 400 y 900, no compatible con Roomba 690 o 890 Robots) Seguro y fácil de usar: Celdas de batería premium, se pueden cargar o descargar según sea necesario sin pérdida de capacidad. Tablero de protección inteligente profesional incorporado que contiene varias protecciones técnicas como carga, descarga, control de temperatura; Protección contra sobrecorriente, etc. Probado por el fabricante para que coincida con los productos OEM, rendimiento duradero. Almacenamiento de la batería: Guarde la batería en un lugar limpio, seco y fresco, lejos del calor y de los objetos metálicos. No la guarde en lugares húmedos y expuestos al sol...
  • Micro Swiss MK10 Chapado resistente al desgaste Boquilla par
    Precio:  $4,719.00

    Micro Swiss MK10 Chapado resistente al desgaste Boquilla par

    -Titulo Original : Micro Swiss MK10 Plated Wear Resistant Nozzle for PTFE Lined Hotend M7 Threads 1.75 mm, 0.4mm (Flash Forge/Dremel/Wanhao)-Fabricante : MICRO-SWISS-Descripcion Original: USA made Micro-Swiss Plated Brass Wear Resistant Nozzles extend nozzle life dramatically when using abrasive materials. // Ultra-hard coating creates a low friction nozzle that outlasts uncoated brass. Brass base material retains thermal conductivity for unchanged thermal performance. // Fit a large variety of machines, check listing name carefully to make sure it fits your printer, or get in touch with us if you are unsure. // Color: Easy upgrade for trouble-free printing of hard composites! Our Plated Brass Wear Resistant Nozzles are made from brass for good thermal conductivity and plated with an extremely hard high lubricity coating. The coating increases the life of the nozzle significantly. We have yet to wear out a nozzle! With normal brass nozzles noticeable wear can occur after as little as 500g of Stainless Steel material. Currently available in: 1. MK8 Style (M6 Threads compatible with most Makerbot style machines including the Replicator 1, 2, 2x, 5th gen, Mini & Z18) in 0. 4mm & 0. 6mm diameter orifices - 1. 75mm filament only. 2. MK10 Style (M7 Threads for newer Flash-Forge, Dremel & Wanhao) in 0. 4mm & 0. 6mm diameter orifices - 1. 75mm filament only. 3. Modified MK8 RepRap Style (M6 Threads compatible with E3D (including BigBox), Hexagon (newer Lulzbot & Robo3D) & Ultimakers upgraded with an Olsson block) for 1. 75mm & 2. 85mm filament diameter in 0. 4mm, 0. 6mm & 0. 8mm diameter orifices. 4. Printrbot Ubis Style (for all Printrbots W/O all metal upgrade) in 0. 4mm & 0. 6mm diameter orifices (ignore 0. 2mm marking. . . long story) - 1. 75mm filament only. 5. Afinia/UP! /Zortrax Style in 0. 4mm & 1. 75mm filament only. Larger diameters require more parameter modification, but have slightly more consistent extrusion & increased life over 0. 4mm. Custom manufactured for ProtoPlant, makers of Proto-pasta in the USA by Micro Swiss. contact Proto-pasta for more information...
  • Boquillas Impresoras 3d Volcano M6 0.4mm 1.75mm
    Precio:  $2,489.00

    Boquillas Impresoras 3d Volcano M6 0.4mm 1.75mm

    -Titulo Original : BIQU 3D Volcano Extra Brass Nozzle 0.4mm M6 Printed Head for 1.75mm Filament 3D Printer (Pack of 5pcs) -Fabricante : BIQU-Descripcion Original: La banda de repuesto es adecuada solo para el reloj Samsung Galaxy Fit E 2019 SM-R375. La banda de repuesto Samsung Galaxy Fit E SM-R375 está hecha de silicona de alta calidad. Ant es más duradero, cómodo y más suave. Esta pulsera de repuesto Samsung Galaxy Fit E 2019 es antiarañazos, antiaceite e impermeable. Las fundas múltiples y el color puro aseguran que la banda de repuesto Samsung Galaxy Fit E SM-R375 sea adecuada para adultos, mujeres y hombres unisex...
Mostrar del 1 al 24 (de 188 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]