Arriba

Impresión > Impresión 3D > Picos Nozzle

Mostrar: 
Mostrar del 1 al 24 (de 175 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • PrimaCreator PC NSP 04Hx1 MK10 MK10 Boquilla de acero endure
    Precio:  $5,729.00

    PrimaCreator PC NSP 04Hx1 MK10 MK10 Boquilla de acero endure

    -Titulo Original : PrimaCreator PC-NSP-04Hx1-MK10 MK10 Hardened Steel Nozzle 0,4 mm-Fabricante : PRIMACREATOR-Descripcion Original: Premium high-quality nozzle for perfect prints “ not to be compared with cheap Chinese nozzles made of low end material in old worn machinery. We only use the best // Manufactured with extreme precession tolerance of only 0.01 mm. Quality is controlled in every step of production to ensure a 100 percent perfect nozzle. Each nozzle is cleaned in ultrasonic bath // Hardened steel nozzle perfect for demanding and abrasive filaments like carbon, metal and glow in the dark. With a hardened steel nozzle, you don´t have to worry about your nozzle wearing out // Mk10 style nozzle with M7 thread for 1.75Mm filaments fits printers like wanhao I3, I3 plus, D4, D6, qiditech, flash forge dreamer, creator, finder, monoprice maker select, cocoon create, etc.¦ // What you get: 1 x 0.40Mm - Mk10 hardened steel nozzle // Fits to: Wanhao I3, D4, D6, qidi tech, Flash Forge dreamer, creator, Finder, monoprice Maker Select, cocoon create, qidi tech the premium nozzles from PrimaCreator are a Series of replacement nozzles that can make more difference for the result than you may Think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. All nozzles from PrimaCreator are made from the best high-quality Brass or steel (depending on Type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints. For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it's time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don't get the same results. After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation. The nozzle will now take shape with millimeter precision, the tolerance is less than 0.01 mm. The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. The nozzles are then checked for one last time and packed individually in a protective box “ ready to be shipped to you...
  • Micro Swiss Boquilla para All Metal Hotend Kit SOLO A2 Acero
    Precio:  $7,449.00

    Micro Swiss Boquilla para All Metal Hotend Kit SOLO A2 Acero

    -Titulo Original : Micro Swiss Nozzle for All Metal Hotend Kit ONLY A2 Hardened Steel .6mm-Fabricante : MICRO-SWISS-Descripcion Original: Fits: Micro Swiss MK10 All Metal Hotend Kit ONLY (M7 Threads) // A2 Hardened Tool Steel Plated with TwinClad XT // WEAR RESISTANT // Orifice size: .6mm // Made in USA by Micro Swiss // This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit our New MK10 All Metal Hotend. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube. It is made from a A2 Steel and heat treated to 57-62 RC. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Luter 20 Un. Printer 3d Boquilla 0.4mm Mk8 Boquilla Extrusor
    Precio:  $3,349.00

    Luter 20 Un. Printer 3d Boquilla 0.4mm Mk8 Boquilla Extrusor

    -Titulo Original : LUTER 20PCS 0.4mm 3D Printer Nozzles MK8 Extruder Nozzles + 5 PCS Stainless Steel Nozzle Cleaning Needles for Makerbot Creality CR-10-Fabricante : LUTER-Descripcion Original: Prime Quality--The 3D printer nozzles are made of high quality brass, the nozzle cleaning needles are made of premium stainless steel. Heavy duty and provide a long service life. // Precise Design--The 0.4mm extruder nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish. Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer. // Excellent Cleaning Needles--The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect to handle tough extruder hot end nozzle clogs. // Useful Combination--The needles are designed for 0.4mm 3D printer nozzles including such as Makerbot Creality, CR-10, Ender 2, Ender 3, etc. The needles are also suitable for everything used as a nozzle. // Package Include--20 x 0.4mm 3D printer nozzles, 5 x nozzle cleaning needles, 1 x transparent storage box // Keep your 3d printer nozzles clean! No more annoying extruder nozzle clogs! A must have for every 3D printer hobbyist Suitable for everything used as a nozzle, such as Air Brush, Water Sprinkler Nozzle, Garden Hose, Shower Head, dishwasher nozzles and so on Nozzle Parameter: Input diameter 1.75mm, output diameter 0.4mm, screw thread:M6, hexagon diameter:6mm Color:Golden Nozzle+Silver Needles Product Weight:70g Package Weight:184g Package Size:12.5cm*8.5cm*1.9cm 20 x 0.4mm 3D printer nozzles 5 x nozzle cleaning needles 1 x transparent storage box Please keep away from children. Cleaning the nozzles untill the nozzle is heated over 200 degrees....
  • Herramientas Eliminación, limpieza y acabado de impresión 3D
    Precio:  $21,419.00

    Herramientas Eliminación, limpieza y acabado de impresión 3D

    -Titulo Original : AMX3d Pro Grade 3D Printer Tool Kit - All The 3D Printing Tools & Accessories Needed to Remove, Clean & Finish 3D Prints (Pro Grade)-Fabricante : AMX3d -Descripcion Original: LAS HERRAMIENTAS ESENCIALES PARA LA IMPRESIÓN 3D: Nuestro kit tiene todo lo que necesita para quitar, limpiar y terminar modelos impresos en 3D en un práctico kit de herramientas, una adición esencial a cualquier sistema de impresión 3D. FÁCIL LIMPIEZA: Limpie sus impresiones 3D, para que se vean como las impresiones profesionales en la caja de la impresora 3D. Un kit de 25 piezas con 13 hojas de cuchillo y 3 mangos, pinzas largas, alicates de punta fina y barra de pegamento. REMOCIÓN SIMPLE: ¡Obtenga sus impresiones 3D de la cama de impresión sin dañarlas! Deslice una de las 3 herramientas de eliminación debajo de su impresión y levante (no haga palanca) sus impresiones. ACABADO PERFECTO: las herramientas combinadas de raspador / pico / cuchilla de precisión de 3 piezas / 6 herramientas se introducen en las grietas más pequeñas para terminar perfectamente su impresión...
  • Li SUN Aluminium Y Carriage Plate Upgrade para Wanhao Duplic
    Precio:  $7,179.00

    Li SUN Aluminium Y Carriage Plate Upgrade para Wanhao Duplic

    -Titulo Original : Li-SUN Aluminum Y Carriage Plate Upgrade for Wanhao Duplicator i3 and Monoprice Maker Select V1 V2 V2.1 Plus 3D Printers with Nozzle Cleaning Needles-Fabricante : LI-SUN-Descripcion Original: Works for Maker Select and Wanhao Duplicator V1, V2, V2.1 and Plus 3D Printers. // Drop-in replacement for stock Y carriage, requires no modification. // Made of high quality Anodized 6061-T6 Aluminum Alloy. // Supports 3 points level adjustment for heated beds. // Includes 3 pcs stainless steel cleaning needle for the nozzle (Diameter: 0.2mm, 0.3mm, 0.4mm). // Drop-in replacement for Wanhao Duplicator i3 and Maker Select, V2, V2.1 and Plus without modification. Anodized 6061-T6 tempered aluminum alloy plate with 3mm thickness. With additional provisioning holes for 3 points level adjustment of build surface. Allows 3 x linear bearing configuration, as well as 4 x bearing configuration. This item is only designed for Wanhao Duplicator, Maker Select and similar 3D Printers with 140mm distance between Y rods, it can not work for typical Prusa i3 like 3D Printers with 170mm Y rods distance. 1 x Anodized Aluminum Carriage Plate for Maker Select and Wanhao Duplicator 3D Printers 3 x Stainless Steel Cleaning Needl...
  • 30 boquillas para impresora 3D - rosca M6
    Precio:  $3,349.00

    30 boquillas para impresora 3D - rosca M6

    -Titulo Original : 30Pcs/Pack SIMAX3D 3D Printer M6 Volcano Nozzles 0.2mm 0.3mm 0.4mm 0.6mm 0.8mm 1.0mm Nozzle For Creality Ender 3 CR-10 Makerbot-Fabricante : SIMAX3D-Descripcion Original: (Especificación del producto) -Tipo: Boquilla de volcán -Material: Latón. - Tamaño: 0,2/0,3/0,4/0,6/0,8/0.039 in. (Lista de embalaje) -5 boquillas largas de 0.008 in volcán -5 boquillas largas de 0.012 in volcán -5 boquillas largas de 0.016 in volcán -5 boquillas largas de 0.024 in. -5 boquillas largas de 0.031 in volcán -5 boquillas largas volcán de 0.039 in. -1 paquete de neddle. -1 llave Alle...
  • Boquilla MK8 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm
    Precio:  $2,409.00
    Expira: 28/04/2021

    Boquilla MK8 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm

    -Titulo Original : SIQUK 22 Pieces 3D Printer Nozzles MK8 Nozzle 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box for 3D Printer Makerbot Creality CR-10-Fabricante : SIQUK-Descripcion Original: Package include: totally 22 pcs MK8 nozzles in 7 sizes, 2 x 0.2mm, 2 x 0.3mm, 10 x 0.4mm, 2 x 0.5mm, 2 x 0.6mm, 2 x 0.8mm, 2 x 1.0mm Parameter: input diameter 1.75mm; output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm; out thread: M6 Applicability and compatibility: fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer Premium material: the 3D printer nozzles are made of high quality brass material, sturdy and durable, connect with M6 out thread, easy to install Attention: small accessories, please keep away from childre...
  • Kweiny MK10 Boquilla Multi Size para Printer 3D Makerbot Par
    Precio:  $5,729.00

    Kweiny MK10 Boquilla Multi Size para Printer 3D Makerbot Par

    -Titulo Original : Kweiny MK10 Nozzle Multi Size for 3D Printer Makerbot Parts (0.2mm 0.4mm 0.6mm 0.8mm 1.0mm) M7 Thread Brass Nozzle for Extruder Hotend 2 Pieces of Each Size 10 Pieces in Total-Fabricante : KWEINY-Descripcion Original: Brass material advantage: The heat conductivity of brass is 7 times as high as that of stainless steel. MK10 hotend structure only allows filament to have little contact with the nozzle. The material of the nozzle must be brass to ensure filament’s temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of stainless steel is so poor, it is unscientific and irrational used on MK10 nozzle. // Compatibility: Fit with MK10 hotend M7 thread aluminum heater block, such as FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, FlashForge Finder, FlashForge Inventor, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice maker select plus, Qidi tech, Cocoon Create, etc. // Quantity and specification: M7 thread nozzle, diameter size 0.2mm 0.4mm 0.6mm 0.8mm 1.0mm, 2 pieces of each size. For detailed dimensions, please refer to the drawings in the upper left. // Multi Size: There are 5 commonly used sizes of nozzle diameter. You can experience different filament feeder rates. // Style: 1. After replace the nozzle, Please recalibrate the distance between nozzle and build plate to ensure the quality of print parts; 2. Small parts, please keep away from children. MK10 hotend M7 thread aluminum heater block; 0.2mm,0.4mm,0.6mm,0.8mm,1.0mm; 1.75mm; M7; Brass. 10PCS(diameter size 0.2mm 0.4mm 0.6mm 0.8mm 1.0mm, 2 pieces of each size)...
  • Boquilla Micro Swiss resistente al desgaste para Wanhao 0.3
    Precio:  $5,749.00

    Boquilla Micro Swiss resistente al desgaste para Wanhao 0.3

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle for Wanhao i3 Mini/Monoprice Mini/MP Select Mini/ProFab Mini/Malyan M200 .3mm-Fabricante : MICRO-SWISS-Descripcion Original: Fits: Wanhao i3 Mini / Monoprice Select Mini / Monoprice Mini Delta / ProFab Mini / Malyan M200 // Brass Nozzle Plated with TwinClad XT // Low Friction, High Lubricity // Orifice size: .3mm // Made in USA by Micro Swiss // This nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • CCTREE 10 un. MK8 Boquilla Extrusora para Printer 3D Makerbo
    Precio:  $3,239.00

    CCTREE 10 un. MK8 Boquilla Extrusora para Printer 3D Makerbo

    -Titulo Original : CCTREE 10pcs MK8 Extruder Nozzle for 3D Printer Makerbot Creality CR-10 Ender 3 5 Different Size 0.2mm, 0.4mm.0.6mm.0.8mm,1.0mm-Fabricante : CCTREE-Descripcion Original: Input Diameter :1.75mm // Output Diameter: 0.2mm,0.4mm,0.4mm.0.6mm.0.8mm,1.0mm // Material: Copper (Brass) // 10Pcs Extruder Brass Nozzle // 5 different size (each size 2pcs) // Specification:13mm*6mm Material: Brass of National standard Weight:2g Nozzle Precision:0.2mm/0.4mm/0.6mm/0.8mm/1.0mm Hexagon Diameter:6mm Screw Thread :M6 Input Diameter: 1.75mm Package Included: 10x nozzles Size:0.2mm,0.4mm,0.6mm,0.8mm,1.0mm Each size 2pc...
  • Extrusor Metalico Para Ender 2/3/5 Crealty Cr-10 Micro Swiss
    Precio:  $23,809.00

    Extrusor Metalico Para Ender 2/3/5 Crealty Cr-10 Micro Swiss

    -Titulo Original : Micro Swiss All Metal Hotend Kit for Creality CR-10 / CR10 / CR10S / Ender 2 / Ender 3 Ender 5 Printers .4mm-Fabricante : Micro Swiss-Descripcion Original: Se adapta a: Creality CR-10 / CR-10S / CR-10-S5 / CR-10 MINI / CR-10-S4 / Ender 2 / Ender 3 / Ender 3 / TronXY X5S Tamaño del orificio: .4 mm El kit incluye: bloque de enfriamiento de aluminio, rotura de calor de titanio de grado 5, bloque calentador de aluminio, boquilla de 4 mm resistente al desgaste chapada en latón MK8, calcetín de silicona Este es un kit de conversión totalmente metálico para impresoras CR-10 Hecho en EE. UU. Por Micro Swis...
  • Anet Correa Dentada Gt2 Con Polea De Sincronizacion De 16 Di
    Precio:  $2,159.00
    Expira: 14/10/2021

    Anet Correa Dentada Gt2 Con Polea De Sincronizacion De 16 Di

    -Titulo Original : Anet GT2 Timing Belt with 16 Teeth Timing Pulley, 1PCS 1.7m PU Material with Steel Wire 6mm Timing Belt + 2PCS Bore 5mm 16 Teeth Timing Pulley for Anet A6 A8 3D Printer-Fabricante : ANET-Descripcion Original: Suitable for Anet A8 A6 3D printer; // GT2 timing belt system is designed specifically for linear movement and precision, high positioning accuracy; // Timing Belt Pulley is made of uality aluminum, excellently machined, finished smoothly; // Main application of timing belt pulley: Belt transmission; // Package included: 1.7m timing belt (1PCS) + 16 Teeth Timing Belt Pulley (2PCS); // Specifications: ---Timing belt 1. Suitable for 3D printer CNC kit replacement. 2. Durable PU material with steel wire. 3. 2mm pitch & 6mm in width, approx. 1.7m. 4. Excellent toughness, great for use. Material: PU & Steel Width: 6mm Pitch: 2mm Length: Approx. 1.7m Quanlity: 1 pieces Package Size: 9 * 8 * 1cm / 3.6 * 3.2 * 0.4in Package Weight: 21g / 0.7oz ---GT2 16 Teeth Timing Pulley 1. GT2 Timing Belt Pulley 16 Teeth, Bore 5mm; 2. Main application: Belt transmission. 3. Use for RepRap i3 Anet A6 A8 3D Printer; 4. This is synchronous aluminum belt pulley for 3D printer. 5. Widely used in 3D printe, milling machine, gear shaper, drilling machine, CNC engine lathe, hobbing machine or other machinery transmission occasions; Brand: Anet Teeth: 16 Teeth Bore: 5mm Length : 15mm Quanlity: 2 pieces Material: Aluminum alloy This pulley is for 5mm shaft stepper motor. Package Includes: 1* 1.7m Timing Belt 2 * GT2 Timing Belt Pulley 5m...
  • Impresora 3d De T&b Limpiador Boquilla Extrusora 0.4mm Limpi
    Precio:  $3,239.00

    Impresora 3d De T&b Limpiador Boquilla Extrusora 0.4mm Limpi

    -Titulo Original : T&B 3D Printer 0.4mm Extruder Nozzle Cleaner Micro Drill Bit Extruder Head Cleaner for MK7 MK8 Makerbot RepRap Felix more 1.75mm filament ABS PLA 10PCS-Fabricante : T&B-Descripcion Original: ✔Bit diameter: 0.4mm // ✔The bit length: 16mm // ✔The length of shank: 20mm // ✔Clear nozzles and produce finer prints // ✔Extends nozzle life // Extruder Nozzle Cleaners are an essential item for any 3D printer owner. Every extruder nozzle must be cleaned out from time to time. These micro dtill bits are the perfect tool for the job. By using these precision drill bits, you will extend the life of your nozzle and without a doubt, produce finer prints. Bit diameter: 0.4mm The bit length: 16mm The length of shank: 20mm Don't use the drill to clean until the nozzle is heated to above 200 degrees! 10 x 0.4mm Drill Bit...
  • Go 3d 0.4mm A2 Boquilla De Acero Endurecido Para V6 J Head M
    Precio:  $5,729.00

    Go 3d 0.4mm A2 Boquilla De Acero Endurecido Para V6 J Head M

    -Titulo Original : GO-3D 0.4mm A2 Hardened Steel Nozzle for V6 J-Head M6 Thread 3D Printer-Fabricante : GO-3D PRINT-Descripcion Original: Orifice size 0.4mm // A2 Hardened Steel Nozzle, Wear Resistant, Abrasion Resistant, Corrosion Resistant // Thread: M6, Filament size: 1.75mm // Compatible with E3D V6, Lite 6, Titan Aero, Prusa i3, MK2 and most of the 3d printers using M6 tread hotend // Designed by GO-3D Print in California // Product Features Kit includes: one nozzle Orifice size available: .4mm Nozzle Detail: A2 Hardened Steel Nozzle Wear Resistant, Abrasion Resistant, Corrosion Resistant Thread: M6 Filament size: 1.75mm Compatible with E3D V6, Lite 6, Titan Aero, Prusa i3, MK2 and most of the 3d printers using M6 tread hotend Designed by GO-3D Print in Califonia Product Description This is E3D V6 style nozzle, it is made from A2 Hardened Steel and heat treated to 57-62 RC material. The nozzle has M6 thread and for 1.75mm 3d printers. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Boquilla De Acero Endurecido E3d Genuino V6 (1.75 Mm) X 0.60
    Precio:  $9,859.00

    Boquilla De Acero Endurecido E3d Genuino V6 (1.75 Mm) X 0.60

    -Titulo Original : Genuine E3D Hardened Steel Volcano Nozzle - 1.75mm x 0.60mm (VOLCANO-NOZZLE-HS-175-0600)-Fabricante : E3D-Descripcion Original: Boquillas de acero endurecido duraderas para su Volcano HotEnd. La impresión 3D con abrasivos como la fibra de carbono, el PLA que brilla en la oscuridad o incluso filamentos rellenos como Woodfill pasan factura a las boquillas de latón. Las boquillas de acero endurecido de E3D resistirán el desgaste y durarán toda la vida. Requiere un HotEnd modificado con un Volcano. Compatible con el Lulzbot Moarstruder. Beneficios Boquillas de impresión súper rápidas para usar con el bloque Volcano y los paquetes para imprimir capas de gran altura y con caudales extremadamente altos....
  • Melife Mk10 Boquilla Para Printer 3d Makerbot Kit De Piezas
    Precio:  $3,239.00

    Melife Mk10 Boquilla Para Printer 3d Makerbot Kit De Piezas

    -Titulo Original : MELIFE MK10 Nozzle for 3D Printer, Makerbot Parts and Extruder Cleaning Tools Kit | M7 Thread 0.4mm Brass Nozzle 6 PCS with 4 Cleaning Needles (0.4 0.35 mm)-Fabricante : MELIFE-Descripcion Original: Compatibility: Fit with MK10 hotend M7 thread aluminum heater block, such as FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, FlashForge Finder, FlashForge Inventor, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice maker select plus, Qidi tech, Cocoon Create, etc. // Brass material advantage: The heat conductivity of brass is 7 times as high as that of stainless steel. MK10 hotend structure only allows filament to have little contact with the nozzle. The material of the nozzle must be brass to ensure filament¡¯s temperature is the same as the thermistor, so it make the melt plastic more smooth. // Good Performance Needles: The Needles are flexible, won't break, twist easily, this drill bits will clean your printer nozzles and other small parts: throat, feeder gear perfectly. // Long-lasting kit for several purposes; Remove excess plastic and clear jams with high precision, also great for general maintenance of the heatsink section. // Quantity and specification: M7 thread 0.4mm nozzle 6 pieces. 0.4mm Nozzle cleaning drill bit 2 pieces. 0.35mm Nozzle cleaning drill bit 2 pieces. 1pc plastic bottle could accommodate and protect all needles. // Color: 1. After replace the nozzle, Please recalibrate the distance between nozzle and build plate to ensure the quality of print parts; 2. Don't use the needle to clean until the nozzle is heated to above 200¡æ(392¨H).You can twist the needle to make it easier to clean up; 3. Sharp parts, please keep away from children. MK10 hotend M7 thread aluminum heater block 0.4mm 1.75mm/3mm M7 Brass 0.4mm nozzle 0.4mm*1PCS, 0.35mm*1PCS 70mm/2.76in Stainless steel SUS304 6 pieces; 0.35 mm 2 pieces; 0.4 mm 2 pieces and a box contain all needle...
  • Boquilla Micro Swiss resistente al desgaste Boquilla .8mm
    Precio:  $5,749.00

    Boquilla Micro Swiss resistente al desgaste Boquilla .8mm

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle for E3D Volcano hotend 1.75mm .8mm-Fabricante : MICRO-SWISS-Descripcion Original: E3D Volcano Compatible Nozzle // Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // 1.75mm Filament // Orifice size: .8mm // Made in USA by Micro Swiss // This is Micro Swiss Plated Wear Resistant nozzle for E3D Volcano hotend. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE codeposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Aokin 22 un. Boquilla Printer 3D MK8 Boquilla Extrusora 0.2m
    Precio:  $2,739.00

    Aokin 22 un. Boquilla Printer 3D MK8 Boquilla Extrusora 0.2m

    -Titulo Original : Aokin 22 Pieces 3D Printer Nozzles, MK8 Extruder Nozzle 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Brass Extruder Print Head for 3D Printer Anet A8 Makerbot MK8 Creality CR-10 Ender 3-Fabricante : AOKIN-Descripcion Original: Compatibility: The printer nozzles fit for Creality CR-10, MK8 Makerbot Reprap Prusa I3, Tevo Tarantula, Anet A8, Ender 3 3D Printer etc. // Package include: totally 22 pcs MK8 extruder nozzle, 7 sizes: 2 x 0.2mm, 2 x 0.3mm, 10 x 0.4mm, 2 x 0.5mm, 2 x 0.6mm, 2 x 0.8mm, 2 x 1.0mm. // Size: the 3D printer nozzles, Out Thread: M6, Filament Diameter: 1.75mm, Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm. // Material: the 3D printer nozzles are made of premium brass, sturdy and high temperature resistance, smooth silk, connect with M6 out thread, easy to use. // Aokin 3D printer nozzles use high quality raw materials and fine workmanship, if you have any question for our product, please feel free to contact us, we will do our best for you. // 2x 0.2mm 3D printer nozzles 2x 0.3mm 3D printer nozzles 10x 0.4mm 3D printer nozzles 2x 0.5mm 3D printer nozzles 2x 0.6mm 3D printer nozzles 2x 0.8mm 3D printer nozzles 2x 1.0mm 3D printer nozzles Material: Brass Out Thread: M6 Filament Diameter: 1.75mm Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Compatibility: Creality CR-10, MK8 Makerbot Reprap Prusa I3, Tevo Tarantula, Anet A8, Ender 3 3D Printer etc. 1、After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts. 2、Small accessories, please keep away from children...
  • Boquilla Original E3D V6 1.75mm x 0.40mm V6-NOZZLE-175-400
    Precio:  $3,949.00

    Boquilla Original E3D V6 1.75mm x 0.40mm V6-NOZZLE-175-400

    -Titulo Original : E3D V6 Extra Nozzle - 1.75mm x 0.40mm (V6-NOZZLE-175-400)-Fabricante : E3D-Descripcion Original: pequeño cable recordatorio le recuerda que debe bloquear su motocicleta y le ayuda a recordar que tiene un bloqueo de disco conectado para que no se dispare y dañe su motocicleta, solo necesita conectar el cable recordatorio al disco bloquear y enganchar el manillar FIT ALL DIS BRAKE Lock: simplemente se conecta a la palanca del freno y Disc Lock es un recordatorio visual. Previene daños potenciales y la vergüenza causada por alejarse mientras el disco está activado SUPER ESTIRAMIENTO: debido a la alta elasticidad del cable de más de 120 cm, puede asegurar los bloqueos del disco de freno en cada tipo de motocicleta; Diámetro exterior del cable metálico: aprox. 3,5 mm; Diámetro interno del cable metálico: aprox. 2mm DISEÑO DURADERO Y FLEXIBLE: hecho de material de aleación de PVC + de alta calidad, procesamiento de superficie lisa, buena resistencia al agua, puede garantizar un tiempo de servicio prolongado CABLE MULTIFUNCIONAL: el cable de bloqueo de seguridad práctico no solo es adecuado para el recordatorio de bloqueo del freno de disco, como la seguridad de los frenos, como motocicletas, scooters, cruceros, helicópteros, bicicletas deportivas, bicicletas de carreras, pero también es ideal para la supervivencia, acampar, pescar, amarrar cargas y flejes de equipaje, etc...
  • Boquilla MK8 resistente al desgaste con revestimiento 0.2
    Precio:  $5,749.00

    Boquilla MK8 resistente al desgaste con revestimiento 0.2

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle MK8 MakerBot, CraftBot, BQ Witbox, BQ Prusa I3 Hephestos .2mm (M2549-02)-Fabricante : MICRO-SWISS-Descripcion Original: Fits: MakerBot Replicator 1, 2 , 2x, Mini, z18​, CraftBot 2, CraftBot PLUS, BQ Witbox, BQ Prusa I3 Hephestos // Plated with TwinClad XT Coating // HIGH LUBRICITY WEAR RESISTANT // Orifice size: .2mm // Made in USA by Micro Swiss // This is MK8 style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Micro Swiss MK10 Chapado resistente al desgaste Boquilla par
    Precio:  $5,749.00

    Micro Swiss MK10 Chapado resistente al desgaste Boquilla par

    -Titulo Original : Micro Swiss MK10 Plated Wear Resistant Nozzle for PTFE Lined Hotend M7 Threads 1.75 mm, 0.4mm (Flash Forge/Dremel/Wanhao)-Fabricante : MICRO-SWISS-Descripcion Original: USA made Micro-Swiss Plated Brass Wear Resistant Nozzles extend nozzle life dramatically when using abrasive materials. // Ultra-hard coating creates a low friction nozzle that outlasts uncoated brass. Brass base material retains thermal conductivity for unchanged thermal performance. // Fit a large variety of machines, check listing name carefully to make sure it fits your printer, or get in touch with us if you are unsure. // Color: Easy upgrade for trouble-free printing of hard composites! Our Plated Brass Wear Resistant Nozzles are made from brass for good thermal conductivity and plated with an extremely hard high lubricity coating. The coating increases the life of the nozzle significantly. We have yet to wear out a nozzle! With normal brass nozzles noticeable wear can occur after as little as 500g of Stainless Steel material. Currently available in: 1. MK8 Style (M6 Threads compatible with most Makerbot style machines including the Replicator 1, 2, 2x, 5th gen, Mini & Z18) in 0. 4mm & 0. 6mm diameter orifices - 1. 75mm filament only. 2. MK10 Style (M7 Threads for newer Flash-Forge, Dremel & Wanhao) in 0. 4mm & 0. 6mm diameter orifices - 1. 75mm filament only. 3. Modified MK8 RepRap Style (M6 Threads compatible with E3D (including BigBox), Hexagon (newer Lulzbot & Robo3D) & Ultimakers upgraded with an Olsson block) for 1. 75mm & 2. 85mm filament diameter in 0. 4mm, 0. 6mm & 0. 8mm diameter orifices. 4. Printrbot Ubis Style (for all Printrbots W/O all metal upgrade) in 0. 4mm & 0. 6mm diameter orifices (ignore 0. 2mm marking. . . long story) - 1. 75mm filament only. 5. Afinia/UP! /Zortrax Style in 0. 4mm & 1. 75mm filament only. Larger diameters require more parameter modification, but have slightly more consistent extrusion & increased life over 0. 4mm. Custom manufactured for ProtoPlant, makers of Proto-pasta in the USA by Micro Swiss. contact Proto-pasta for more information...
  • Filamento Sindoh 3DWOX Recarga DP200 ABS Azul 1.75mm 700gr
    Precio:  $12,939.00

    Filamento Sindoh 3DWOX Recarga DP200 ABS Azul 1.75mm 700gr

    -Titulo Original : Sindoh 3dwox Refill Filament Abs Blue (compatible With Dp200, 3dwox 1, 1x, 2x) , Spool , 1.75 Millimeters Diameter, Model Number: 3dp200abl-r-Fabricante : Sindoh-Descripcion Original: MARCADOR DE PUNTAS DOBLES: puntas gemelas amplias y finas para resaltar, dibujar y subrayar con precisión. Los marcadores finos se pueden usar para escribir y enganchar líneas, mientras que los marcadores gruesos son adecuados para dibujar y colorear. 88 COLORES VIBRANTES: los marcadores a base de agua tienen colores brillantes y buena transparencia. El marcador nunca se desvanecerá con el tiempo. Cada color es atractivo, lo que puede agregarle un toque de creatividad y diversión. 88 colores vivos pueden satisfacer todas sus necesidades. REGALO PERFECTO: el juego de rotuladores está equipado con un hermoso estuche negro que es fácil de transportar, viajar y almacenar. También es un regalo de Navidad ideal para niños, adolescentes, adultos, estudiantes, maestros, etc. USOS ILIMITADOS: los marcadores a menudo se usan para pintar en papel de cartulina más apretado o papel recubierto. Además, se puede utilizar en expresiones de arquitectura, interiorismo, diseño industrial y diseño de productos pintados a mano. SEGURO Y NO TÓXICO: 100% seguro para niños a partir de 3 años. Cada marcador no es tóxico. Los marcadores de alcohol de color Vigorfun 88 son permanentes y coloridos con puntas de doble cara. Los rotuladores son atractivos, los colores son brillantes y nunca se desvanecen. Los marcadores se pueden utilizar ampliamente, como papel para tarjetas, papel recubierto, diseño industrial, diseño de productos, etc. No solo pueden dibujar y colorear, sino también resaltar, dibujar y subrayar. Además, son seguros y no tóxicos, un gran regalo para niños, adolescentes y adultos. Caracteristicas Puntas de cincel ancho y punta fina Forma cuadrada del barril Fluido suave Cada marcador tiene su nombre y número de color El juego viene con una tarjeta de color. Todo viene en una hermosa bolsa negra con soporte Especificaciones 1.Marca: Vigorfun 2.Tamaño de los marcadores: 6.9 x 5.5 x 6.7 pulgadas (17.5 x 14 x 17 cm) 3.Marcadores de peso: 3,4 libras (1,56 kg) 4.Color: 88 colores. 5.Paquete: bolsa negra con soporte 6.Ingredientes: 64% de etanol anhidro, 18% de resina, 10% de disolvente negro, 8% de propilenglicol monometiléter 7.Usos: papel, tela, zapatos, artesanías, paredes, vidrio, piedra, madera, etc. CONSEJOS 1. Retirar la tapa no más de una hora. 2. Se recomienda cubrir la tapa inmediatamente después del uso: los marcadores no estarán secos; el color no se mezclará; larga vida útil 3. Si el marcador está seco, cubra la tapa y espere más de diez minutos...
  • Zeelo 12 un. Printer 3D Boquilla MK8 Cabezal de impresión ex
    Precio:  $2,879.00
    Expira: 15/10/2021

    Zeelo 12 un. Printer 3D Boquilla MK8 Cabezal de impresión ex

    -Titulo Original : Zeelo 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm Extruder Print Head with Free Box for 3D Printer Makerbot Creality CR-10 (Makerbot, Creality, RepRap,etc)-Fabricante : ZEELO-Descripcion Original: Package include: totally 12 pcs MK8 nozzles 12 x 0.4mm // Parameter: input diameter 1.75mm; output diameter 0.4m, mout thread: M6 // Applicability and compatibility: fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer // Premium material: the 3D printer nozzles are made of high quality brass material, sturdy and durable, connect with M6 out thread, easy to install // Attention: small accessories, please keep away from children // Color: gold  Material: brass  Output diameter: 0.4 mm  Input diameter: 1.75 mm  Screw thread: M6  Quantity: 12 pcs  12 x 0.4 mm 3D printer nozzles  1 x Plastic box  Zeelo are devoted to offer premium quality products to all cherished customers. Meanwhile supply 45 days money back guarantee and 18 months warranty.  If there are any questions, please feel free to contact us, Zeelo  Customer Service Team will spare no efforts to assist with you within 24 hours...
  • Impresoras Cr 10s 3d Piezas De Repuesto Originales / Accesor
    Precio:  $11,119.00

    Impresoras Cr 10s 3d Piezas De Repuesto Originales / Accesor

    -Titulo Original : CR-10S 3D Printers Original Replacement Parts/Accessories Full Assemble MK8 Extruder Hot End Kits (with Nozzle 0.4mm /0.2mm /0.3mm /0.5mm) fit for Creality 3D Printing Printer CR-10 CR-10S CR10S5-Fabricante : RICHOOSE-Descripcion Original: 100% ORIGINAL CREALITY 3D PRINTING PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY // MATERIAL:ALUMINUM ALLOTY /STANIESS STEEL/BRASS // CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE // MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 12V 40W. // TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON) // WELCOME TO UCHOOSE AMAZON STORE,ALL GOODS WE SALES WITH 100% BRAND NEW AND HIGH QUALITY. Features: Note: This Extruder Head Kit is original replacment parts only for Creality 3D Printer CR-10 /CR-10S/CR-10S5 if be used to the other brand modles, customers need to afford to the resonsibility by themselves, meanwhile, our warranty will not valid for this cause. Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon) MK8 Extruder Hot End Kit, white wire was temperature thermistor, Black wire was heating tube 12V 40W Specification: Installation type: external thread connection Scope of application: 3D printer Nozzle size : 0.4mm(also suitable for 0.2mm 0.3mm 0.5mm mk8 nozzle) Operating temperature range: -40~+260°C (-40~+500°F) Material: Aluminum+Stainless Steel+Brass Throat pipe length: 30mm Aluminum block size: approx. 20 x 20 x 10mm Thermistor and heater cable length: 1M...
Mostrar del 1 al 24 (de 175 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]