Arriba

Impresión > Impresión 3D > Picos Nozzle

Mostrar: 
Mostrar del 1 al 24 (de 194 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Boquilla Micro Swiss resistente al desgaste para LulzBot 1.2
    Precio:  $3,519.00

    Boquilla Micro Swiss resistente al desgaste para LulzBot 1.2

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle for LulzBot TAZ 5, TAZ 6, LulzBot Mini, Hexagon Hotend 1.2mm-Fabricante : MICRO-SWISS-Descripcion Original: Nozzle for LulzBot TAZ 5, LulzBot TAZ 6, LulzBot Mini, Hexagon Hotend // Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // 3mm Filament // Orifice size: 1.2mm // Made in USA by Micro Swiss // This is Plated Wear Resistant Nozzle for LulzBot TAZ 5, TAZ 6, LulzBot Mini, Hexagon Hotend M6 thread, 3mm Filament. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Pchero 5 Un. M6 X 40 Mm Acero Inox. Teflon Boquilla Garganta
    Precio:  $2,629.00

    Pchero 5 Un. M6 X 40 Mm Acero Inox. Teflon Boquilla Garganta

    -Titulo Original : PChero 5pcs M6 x 40mm Stainless Steel Teflon Nozzle Throat + 5pcs 0.4mm Brass Extruder Nozzle Print Heads for Anet A8 MK8 Reprap 3D Printers-Fabricante : PCHERO-Descripcion Original: ★ Package Included - 5 x 0.4mm Extruder Brass Nozzle Print Heads + 5 x 40mm Length 1.75mm Nozzle Inputting Tube ( suitable for MK8 Makerbot Reprap Prusa I3 3D Printer). // ★ Brass Nozzle - 0.4mm Output Diameter and 1.75mm Input Diameter. Made of durable high precision Brass material. Provide a long service life. // ★ 40mm Length Nozzle Throat - 2mm Inner Diameter for 1.75mm Supplies. High Temperature Pipe Insulation. Unique 45° Chamfer Design, can highly compact with butt fitting and effectively prevent the hot filament leakage. // ★ Compatibility - Compatible with all 1.75mm PLA ABS 3D printers. Works well with Anet A8 MK8 Makerbot Reprap Prusa I3 Creality CR-10 3D Printers. // ★ NOTE - Small parts, please keep them away from children to avoid swallow risk! Any questions in use, please feel free to contact us. //...
  • Kit de limpieza de boquillas de impresora 3D de latón MK8 0.
    Precio:  $2,669.00

    Kit de limpieza de boquillas de impresora 3D de latón MK8 0.

    -Titulo Original : 24 Pcs Print Nozzle MK8 Brass 3D Printer Nozzle Cleaning Kit 0.4mm Print Head Nozzle Extruder Headfor 1.75mm-Fabricante : Uspacific-Descripcion Original: caracteristicas Este cortafuegos de metal de 1.75 mm es para V6. Rendimiento duradero y estable. Compatible con Hotends de filamento de 1.75 mm. Especificación: Material: Acero inoxidable Longitud: 22mm Lista de empaque: Garganta totalmente metálica de 5 x 1.75 m...
  • Aokin Mk8 Boquilla Para Printer 3d 24 Un. M6 Bronce Extruder
    Precio:  $2,399.00

    Aokin Mk8 Boquilla Para Printer 3d 24 Un. M6 Bronce Extruder

    -Titulo Original : Aokin MK8 Nozzle for 3D Printer, 24Pcs M6 Brass Extruder Head Hotend Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm & 5pcs Cleaning Needles fit 1.75mm Filament Makerbot Creality CR-10 ANET A8-Fabricante : AOKIN-Descripcion Original: Compatibility: This printer nozzles are compatible with Anet A8, Creality CR-10, Tevo Tarantula, MK8 makerbot, duplicator, prusa i3 and reprap printer. // Material and Size: These printer nozzle are made of brass, Out Thread: M6, Filament Diameter: 1.75mm, Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm. // Nozzle Cleaning Needles: 5 pieces cleaning needles have 5 different size: 0.2 mm, 0.3 mm, 0.4mm, 0.6mm and 0 .8mm, suitable for cleaning most of your 3D Printer nozzles. // Premium Quality: The cleaning needles are made of high quality stainless steel, flexible, sturdy and durable. With a handle, you can twist the drill when using. // Note: After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts. // Color: Material: Brass Compatibility: Anet A8, Creality CR-10, Tevo Tarantula, MK8 makerbot, duplicator, prusa i3 and reprap printer Out Thread: M6 Filament Diameter: 1.75mm Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Material: Stainless steel Bit diameter: 0.2mm 0.3mm 0.4mm 0.6mm 0.8mm Free box: Convenient for collecting the cleaning kit 3x 0.2mm Printer Extruder Nozzle 3x 0.3mm Printer Extruder Nozzle 6x 0.4mm Printer Extruder Nozzle 3x 0.5mm Printer Extruder Nozzle 3x 0.6mm Printer Extruder Nozzle 3x 0.8mm Printer Extruder Nozzle 3x 1.0mm Printer Extruder Nozzle 1 x 0.2mm cleaning needle 1 x 0.3mm cleaning needle 1 x 0.4mm cleaning needle 1 x 0.6mm cleaning needle 1 x 0.8mm cleaning needl...
  • 3D Printer Fan Blower Fan DC 12V 40x10 50x15 Extruder Coo...
    Precio:  $1,729.00

    3D Printer Fan Blower Fan DC 12V 40x10 50x15 Extruder Coo...

    -Titulo Original : 3D Printer Fan Blower Fan DC 12V 40x10 50x15 Extruder Cooling Fan (30cm) Eewolf-Fabricante : EEWOLF-Descripcion Original: Package include: 1pc 50*50*15 fan and 1pc 40*40*10 fan // Each fan has 2 cables. If there is no terminal on the main board, you can cut the connectors off. // Great cooler for hot ends, extruder, prints & other parts on 3D printer. // 12V 3D printer cooling fan // High rotation speed with low noise. 30CM in length. // 3D Printer Fan Blower Fan DC 12V 40x10 50x15 Extruder Cooling Fan (30cm) Eewolf Each fan has 2 cables. If there is no terminal on the main board, you can cut the connectors off. Package include: 1pc 50*50*15 fan and 1pc 40*40*10 fan 4010 fan: 12V 0.09A 5015 fan: 12V 0.16A Wire length: 30C...
  • Impresora 3D WINSINN Garganta de corte de calor de titanio t
    Precio:  $4,639.00

    Impresora 3D WINSINN Garganta de corte de calor de titanio t

    -Titulo Original : WINSINN 3D Printer All-Metal Titanium Heatbreak Throat, Compatible with Chimera Kraken Heat Break M6 1.75mm Fit Multi Nozzle Hotend Extruder (Pack of 5Pcs)-Fabricante : WINSINN-Descripcion Original: ✔️TC4 Titanium alloy Material - Ultra-low thermal conductivity // ✔️Works with Chimera Kraken Multi Nozzle Hotend Extruder, Thread: M6 // ✔️Make Sure The Printer Stable Operation. // ✔️The Hole is Very Smooth, Not Clogged, The Printer Works Smoothly // ✔️Made by WINSINN // Color: ►Material: High quality TC4 Titanium ►Works with Chimera Kraken Multi Nozzle Hotend Extruder ►Thread: M6 ►For 1.75mm Filament --------------------------------------------------------------------------------------------------------------------- Package include: ►5 x TC4 titanium alloy HeatBreak --------------------------------------------------------------------------------------------------------------------- -WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply -If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours...
  • Impresora 3d M7 Rosca Mk10 Boquilla Para 1.75mm Filamento .2
    Precio:  $5,079.00

    Impresora 3d M7 Rosca Mk10 Boquilla Para 1.75mm Filamento .2

    -Titulo Original : 3D Printer M7 Thread MK10 Nozzles for 1.75MM Filament .2mm .3mm .4mm .5mm .8mm 1.0mm (1 Each) Wanhao Dupicator D4/I3 Makerbot 2-Fabricante : DAEWON INDUSTRIES-Descripcion Original: Quality Brass Nozzles // Wide array of sizes // M7 thread MK10 printer nozzles .2mm .3mm .4mm .5mm .8mm 1.0mm // Wanhao Dupicator D4/I3/Dremel nozzles // Makerbot 2 nozzles // Includes: Material: Brass Filament inlet: 1.75mm Fit for: Wanhao Dupicator D4/I3 and various Makerbot 3D Printers FlashForge Creator Pro FlashForge Creator X FlashForge Dreamer Dremel Idea Builder​ PowerSpec 3D Pro​ Wanhao Duplicator 4S Wanhao Duplicator 4X Wanhao i3 Monoprice Maker Select 3D Printer v2 Cocoon Create 3D Printer...
  • 0.6MM MK8 Ender 3 Nozzles (10 unidades) impresora 3D
    Precio:  $2,069.00

    0.6MM MK8 Ender 3 Nozzles (10 unidades) impresora 3D

    -Titulo Original : 0.6MM MK8 Ender 3 Nozzles 10 pcs 3D Printer Brass Nozzles Extruder for Makerbot Creality CR-10 with 3 Needles and Metal Storage Box (0.6mm) -Fabricante : Meafeng-Descripcion Original: High Resolution: Full HD 1920x1200,High Contrast: 1200:1,High Brightness: 450cd/m2 // 160°wide viewing angles IPS Panel,Ultra thin design 17mm thickness;Histogram // Focus Assist(Red,Yellow,Blue,White four color optional highlight over parts of the image in focus);False Color;Squared segmentation; Embedded audio meter;Camera Mode // Scan Mode(Over, Under);Zoom(Auto,4x,9x,16x);Anamorphic mode(1.3x,2.0x,2.0x mag);Pixel to Pixel;Center Marker;Safe Area (70%,80%,90%) // Marker Type(16:9,4:3,2.35:1,1.85:1);Marker Color(Red,Green,Blue,White,Black,Cyan,Purple,Yellow);Check Field(Gray/Red/Green/Blue);Image Flip (H, V, H/V);Image Freeze;Color Tepm. Adjustment //...
  • 14 un. Printer 3D M6 Boquilla Extrusora 0.4mm Bronce Boquill
    Precio:  $2,839.00

    14 un. Printer 3D M6 Boquilla Extrusora 0.4mm Bronce Boquill

    -Titulo Original : 14 Pcs M6 3D Printer Nozzle 0.4mm Extruder Brass Nozzle Print Head-Fabricante : KULANNDER-Descripcion Original: Good Design: The hole of 3D print nozzle is consistent size and machining, the threads is clean and well formed. The size is clear stamped on the nozzles. // Compatibility: Compatible with all 1.75mm ABS/ PLA 3D printer, work well with Monoprice select mini, V5 V6, Prusa i3, Anet8, Anycubic i3 mega, etc. // Replacement Nozzle: The 0.4mm M6 3D printer nozzle is a good back up or emergenices when the stock nozzle clog, our brass nozzles produce consistent printing and no clog, give you a smooth and clean printing. // Brass Material: The extruder brass nozzle print head is made of durable and solid brass material, not easy get rust or erosion, provide long serivice life. // Quantity: Package include 14pcs nozzle print head, out diameter: 0.4mm. // Step 1: Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280). Step 2: After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out. Step 3: Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight. Type: Extruder Brass Nozzle Print Head Material: Brass Compatibility: Compatible with all 1.75mm ABS/ PLA 3D printer, work well with Monoprice select mini,Prusa i3, Anet8, Anycubic i3 mega, etc. Installation: external M6 thread connection Out Thread: M6 Filament Diameter: 1.75mm Output Diameter:0.4mm Small parts, please keep away from children. 14 x 0.4mm nozzle print hea...
  • Kossel Delta Z axis Printer 3D Sonda Z de alta precisión Kit
    Precio:  $3,039.00

    Kossel Delta Z axis Printer 3D Sonda Z de alta precisión Kit

    -Titulo Original : Kossel Delta Z axis 3D Printer High Precision Z-Probe Auto Bed Leveling Sensor kit 3D Touch Sensor for V6 nozzles and MK8 nozzles Hotend-Fabricante : POLISI3D-Descripcion Original: IMPORTANT! Please make sure that the nozzle and bed is cool down to room temperature before mount the sensor.The sensor will be destoryed if the nozzle temperature is too high // Can be used with any printing surface including Printbite,PEI,Buildtak,Glass,Aluminium,FR4. // Uses a standard endstop connector;Voltage comparator module can provide repeatable and stable single output // Very easy to configure in your firmware,No X or Y offsets,your nozzle is the tool head,so use the nozzle to probe // This product is an auto bed leveling kit using membrane switch technology.Nozzle contact is a direct measurement,the nozzle is the 'sharp end of the tool'.Since there are no x and y offsets(and very minimal z-offset)the whole of the printable area of the bed can be probed.It is light weight and removable will not add any mass to your printhead.The firmware setting is simplest of all the autobed leveling method. // Package: 1 x Voltage comparator PCB module 1 x Endstop Cables 1 x Membrane switch sensor within 1meter conector 2 x Foam ring for mount the sensor to the nozzl...
  • Boquilla para Printer 3D QIDI TECH X Plus y X MAX: 2 un. equ
    Precio:  $5,089.00

    Boquilla para Printer 3D QIDI TECH X Plus y X MAX: 2 un. equ

    -Titulo Original : Nozzle for QIDI TECH X-Plus & X-MAX 3D Printer: 2 pcs kit-Fabricante : R QIDI TECHNOLOGY-Descripcion Original: 3d printer nozzle // nozzle // plus nozzle // max nozzle // nozzle ptfe tube // Nozzle for X-plus and X-max 3d printer Nozzle Diameter:0.4mm Suitable Filament:1.75m...
  • Boquilla E3d Bronce V6 Genuina 1.75 Mm X 0.80 Mm (boquilla V
    Precio:  $2,519.00

    Boquilla E3d Bronce V6 Genuina 1.75 Mm X 0.80 Mm (boquilla V

    -Titulo Original : Genuine E3D Brass V6 Nozzle - 1.75mm x 0.80mm (V6-NOZZLE-175-800)-Fabricante : E3D-Descripcion Original: Nozzle Size of 1.75mm x 0.80mm // Genuine E3D part // Can handle most filaments as long as they are not abrasive // Fits all Genuine E3D V6 and V5 Hotends // High Quality Brass // This Genuine E3D V6 nozzle has been fully redesigned based on customer feedback. This Brass .8mm nozzle is a beast of a nozzle. This nozzle has twice the diameter output as the standard .4mm nozzle which means a much larger filament output. By utilizing this large diameter nozzle, you can print large objects much faster using larger layer heights. This does sacrifice some detail in your print, but the amazing print speeds can make up for that if you are printing less detailed objects. The nozzles have reduced back-pressure which allows exceptionally smooth and easy flow of filament while improving retractions. The smaller nozzles have a small nozzle tip which offers incredible precision. V6 Nozzles feature backwards compatibility, so they can be used to upgrade your V5 HotEnd. If you are using a V6 HeatBreak it is recommended that you use a V6 Nozzle. Each nozzle is carefully built to the highest quality. Please be aware that software adjustments will have to be made before printing with this nozzle. Your slicer software has to know that the nozzle has an increased layer height. Please reference your slicers online manual and also reference the E3D wiki to verify everything is set correctly before printing...
  • Impresora 3D Boquilla + 4 herramientas de bricolaje para J H
    Precio:  $2,629.00

    Impresora 3D Boquilla + 4 herramientas de bricolaje para J H

    -Titulo Original : 3D Printer Nozzles + 4 DIY Tools for J-Head E3D V5 V6 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm Nozzle Tool for Nozzle Replacement, Spanner, Installation Tools …-Fabricante : BIAOBIAO-Descripcion Original: No more burnt fingers for you! This is a must have tool for changing print nozzles. Having the right tools makes all the difference in the world! // Multi-size High-precision extruder nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm // Compliant all M6 thread 3D printer: The nozzles used M6 thread, same as MK8 MK7 UM2 CR10 etc. // Special tools: special spanner and multi-function screwdriver can help you adjustment 3D Printer and change extruder nozzle more easy! // Note: Screwdriver maybe rust, but No effect on use. Spanner only fit for E3D heat block (20*16mm and 16*16mm) // This is High-precision extruder nozzle produce by CNC. High quality brass with M6 thread, compliant with all M6 thread 3D printer. Special tools make you change extruder nozzle FAST, SAFE and EASY. NOTICE: This spanner only for E3D heat blocks -(16*16mm & 20*16mm), it will not work with MK8 block (20*20mm) Turn on 3D Printer, set nozzle temperature to target (PLA: 80-220, ABS: 240-280). After heat done, use SPANNER to hold heat block, use Socket screwdriver to screw old nozzle out. old nozzle will be very hot, don't touch by hands!!! Put new nozzle to this socket screwdriver, spanner keep to hold heat block, screw nozzle in, must be tight and it is done. 0.2mm extruder nozzle * 1pc 0.3mm extruder nozzle * 1pc 0.4mm extruder nozzle * 2pcs 0.5mm extruder nozzle * 1pc 0.6mm extruder nozzle * 1pc 0.8mm extruder nozzle * 1pc Simple spanner * 1pc 3 in 1 screwdriver(1 Handle with 2 Heads) * 1p...
  • PrimaCreator PC NSP 06Hx1 MK8 MK8 Boquilla de acero endureci
    Precio:  $3,519.00

    PrimaCreator PC NSP 06Hx1 MK8 MK8 Boquilla de acero endureci

    -Titulo Original : PrimaCreator PC-NSP-06Hx1-MK8 MK8 Hardened Steel Nozzle 0.6 mm-Fabricante : PRIMACREATOR-Descripcion Original: Premium high-quality nozzle for perfect prints not to be compared with cheap Chinese nozzles made of low end material in old worn machinery. We only use the best // Manufactured with extreme precession tolerance of only 0.01 mm. Quality is controlled in every step of production to ensure a 100 percent perfect nozzle. Each nozzle is cleaned in ultrasonic bath // Hardened steel nozzle perfect for demanding and abrasive filaments like carbon, metal and glow in the dark. With a hardened steel nozzle, you don't have to worry about your nozzle wearing out // MK8 style nozzle with M6 thread for 1.75mm filaments - for printers like Creality3D CR-10, Craftbot, Makerbot 1/2/2x, BQ etc. // What you get: 1 x 0.60Mm - Mk8 hardened steel nozzle // Size:  |  Style: Fits to: MakerBot Replicator 1/2/2x/Replicator 5th Gen/Mini/z18?, CraftBot 2, CraftBot PLUS, BQ Wit box, BQ Prusa I3 Hephestos, Creality CR-10 / CR-10S, Tevo TornadoThe premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. All nozzles from PrimaCreator are made from the best high-quality brass or steel (depending on type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than ± 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints. For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it's time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don't get the same results. After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation. The nozzle will now take shape with millimeter precision, the tolerance is less than ± 0.01 mm. The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. The nozzles are then checked for one last time and packed individually in a protective box ready to be shipped to you...
  • Impresora 3D Boquilla Kit de Limpieza Kit 0.4mm 0.35mm Aguja
    Precio:  $2,179.00

    Impresora 3D Boquilla Kit de Limpieza Kit 0.4mm 0.35mm Aguja

    -Titulo Original : 3D Printer Nozzle Cleaning Tool Kit - 0.4mm 0.35mm Needles Tweezers Filament Clog Cleaner Accessories Part Drill Bits 27pcs Mika3D-Fabricante : MIKA3D-Descripcion Original: Great Value: Total 27pcs include: 12pcs 0.4mm stainless steel needles,12pcs 0.35mm copper needles, 2pcs different shape precise tweezers, 1pc plastic bottle, Excellently cleaning 3d printer filament clog // Good Performance Needles: The Needles are flexible, won't break, twist easily, this drill bits will clean your printer nozzles and other small parts: throat, feeder gear perfectly // High Quality Tweezers: It include 2 different shape of precise tweezers, great for nozzle maintenance, cleaning up extruder hot ends and cleaning excess support material (PLA/ABS filament). // Wide Compatible: Widely Compatible with most of 3d printers extruder nozzles from market, E3D, MK8, MK10,etc // Good Package and Warranty: All of 26pcs packed in one safe handy bottle,We are Confident about Product Quality,Within 12 hours response,100% Satisfaction Guarantee //...
  • Boquilla Micro Swiss resistente al desgaste Boquilla .8mm
    Precio:  $3,519.00

    Boquilla Micro Swiss resistente al desgaste Boquilla .8mm

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle for E3D Volcano hotend 1.75mm .8mm-Fabricante : MICRO-SWISS-Descripcion Original: E3D Volcano Compatible Nozzle // Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // 1.75mm Filament // Orifice size: .8mm // Made in USA by Micro Swiss // This is Micro Swiss Plated Wear Resistant nozzle for E3D Volcano hotend. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE codeposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Micro Swiss HW NOZ MK8 06 Boquillas resistentes al desgaste
    Precio:  $3,519.00

    Micro Swiss HW NOZ MK8 06 Boquillas resistentes al desgaste

    -Titulo Original : Micro-Swiss HW-NOZ-MK8-06 Plated Brass Wear Resistant Nozzles, 1.75 mm, MK8 (Makerbot) 0.6 mm, Bright Nickel-Fabricante : MICRO-SWISS-Descripcion Original: USA made Micro-Swiss Plated Brass Wear Resistant Nozzles extend nozzle life dramatically when using abrasive materials. // Ultra-hard coating creates a low friction nozzle that outlasts uncoated brass. Brass base material retains thermal conductivity for unchanged thermal performance. // Fit a large variety of machines, check listing name carefully to make sure it fits your printer, or get in touch with us if you are unsure. // Easy upgrade for trouble-free printing of hard composites! Our Plated Brass Wear Resistant Nozzles are made from brass for good thermal conductivity and plated with an extremely hard high lubricity coating. The coating increases the life of the nozzle significantly. We have yet to wear out a nozzle! With normal brass nozzles noticeable wear can occur after as little as 500g of Stainless Steel material. Currently available in: 1. MK8 Style (M6 Threads compatible with most Makerbot style machines including the Replicator 1, 2, 2x, 5th gen, Mini & Z18) in 0. 4mm & 0. 6mm diameter orifices - 1. 75mm filament only. 2. MK10 Style (M7 Threads for newer Flash-Forge, Dremel & Wanhao) in 0. 4mm & 0. 6mm diameter orifices - 1. 75mm filament only. 3. Modified MK8 RepRap Style (M6 Threads compatible with E3D (including Big Box), Hexagon (newer Lulzbot & Robo3D) & Ultimakers upgraded with an Olsson block) for 1. 75mm & 2. 85mm filament diameter in 0. 4mm, 0. 6mm & 0. 8mm diameter orifices. 4. Printrbot Ubis Style (for all Printrbots W/O all metal upgrade) in 0. 4mm & 0. 6mm diameter orifices (ignore 0. 2mm marking. . . long story) - 1. 75mm filament only. 5. Afinia/UP! /Zortrax Style in 0. 4mm & 1. 75mm filament only. Larger diameters require more parameter modification, but have slightly more consistent extrusion & increased life over 0. 4mm. Custom manufactured for ProtoPlant, makers of Proto-pasta in the USA by Micro Swiss. contact Proto-pasta for more information...
  • Boquilla Extrusora Mk10 04mm X 1.75mm 20 Unidades
    Precio:  $2,629.00

    Boquilla Extrusora Mk10 04mm X 1.75mm 20 Unidades

    -Titulo Original : Aokin MK10 M7 Nozzle for 3D Printer, 20PCS Brass Extruder Head Hotend Nozzles 0.4mm, fit 1.75mm Filament Wanhao Dupicator D4/I3/Dremel Makerbot-Fabricante : Aokin-Descripcion Original: Product description Color: 20 Pcs M7 MK10 Nozzles 20 Pcs M7 Thread Brass Extruder Head Hotend Nozzle 1.75mm Filament: Material: Brass Out Thread: M7 Filament Diameter: 1.75mm Output Diameter: 0.4mm Only fits printers which use 4mm Teflon tube which might include: Wanhao Duplicator 4 series Flashforge (newer models) FlashForge Creator Pro FlashForge Creator X FlashForge Dreamer Dremel Idea Builder Monoprice Maker Select 3D Printer v2 PowerSpec 3D Pro PowerSpec 3D X Qidi Tech Wanhao Duplicator 4S Wanhao Duplicator 4X Wanhao i3 Cocoon Create 3D Printer Package Includes: 0.4mm Nozzle X 20Pcs Compatibilidad: las boquillas de esta impresora son compatibles con FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Dremel Idea Builder?, PowerSpec 3D Pro?, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice Maker Select 3D Printer v2, Cocoon Create 3D Impresora. El paquete incluye: totalmente 20 piezas x 0. Boquilla extrusora MK10 de 4 mm. Tamaño: las boquillas de la impresora 3D, rosca: M7, diámetro del filamento: 1. 75 mm, diámetro de salida: 0. 4 mm. Material: las boquillas de la impresora 3D están hechas de latón Premium, resistente y resistente a altas temperaturas, seda suave, se conectan con rosca M7, fácil de usar. Nota: después de reemplazar la boquilla, recalibre la distancia entre la boquilla y la placa de construcción para garantizar la calidad de las piezas de impresión...
  • Boquilla Micro Swiss resistente al desgaste .5 mm para Robo
    Precio:  $3,519.00

    Boquilla Micro Swiss resistente al desgaste .5 mm para Robo

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle .5mm for Robo 3D - M6 Thread 1.75mm Filament Hexagon (Robo R1/R1 +Plus, Robo C2, Robo R2)-Fabricante : MICRO-SWISS-Descripcion Original: Upgrade nozzle for Robo R1/R1 +PLUS, Robo C2, Robo R2 // Nozzle Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // 1.75mm Filament // Orifice size: .5mm // Made in USA by Micro Swiss // This is Micro Swiss nozzle for Robo 3D Printers, M6 thread, 1.75mm Filament, Hexagon style hotend. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • .2mm Boquilla para Micro Swiss MK10 Kit de actualización de
    Precio:  $3,519.00

    .2mm Boquilla para Micro Swiss MK10 Kit de actualización de

    -Titulo Original : .2mm Nozzle for Micro Swiss MK10 All Metal Hotend Upgrade Kit-Fabricante : MICRO-SWISS-Descripcion Original: Nozzle for Micro Swiss MK10 All Metal Hotend Kit // Nozzle Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // Upgrade for MK10 Exturders // Orifice size: .2mm // Made in USA by Micro Swiss // This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit our MK10 All Metal Hotend Kit. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • 10 Boquillas MK8 0.6mm para Filamento 1.75mm ABS
    Precio:  $2,399.00

    10 Boquillas MK8 0.6mm para Filamento 1.75mm ABS

    -Titulo Original : Lheng 10Pcs Filament nozzles 0.6mm MK8 Print Head for Cr10 Brass Extrude Nozzle Print Head-1.75mm Filament ABS- for 3DPrinter-Fabricante : Lheng-Descripcion Original: Hecho de cobre importado, hilo uniforme, mayor velocidad de fusión y velocidad de impresión. Parámetro: diámetro de entrada 1.75 mm; diámetro de salida 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm, 1.0 mm; hilo de salida: M6. La forma es lisa. El aceite es brillante. No hay rebabas. Las letras son claras y los detalles son de calidad. El achaflanado es redondo y redondo, lo que reduce la resistencia del cofre de agua a los consumibles, evita la seda y se tapa. Aplicabilidad y compatibilidad: apto para la impresora 3D Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible con todas las impresoras 3D PLA ABS 3D de 1.75 mm...
  • Impresora 3D FYSETC Robo Parts Original Hexagon Hotend Extru
    Precio:  $7,559.00

    Impresora 3D FYSETC Robo Parts Original Hexagon Hotend Extru

    -Titulo Original : FYSETC 3D Printer Robo Parts Original Hexagon Hotend Extruder Kit All Metal Set with 0.4mm Nozzle 100K Thermistor Heatsink Wire for Robo R1 1.75mm Filament 12V-Fabricante : FYSETC-Descripcion Original: Original Robo Printer DIY parts, replacement accessorie; This hotend is a replica of popular Robo Printer's hotend, but will not work with R2, R2 hotend need 24V, this hotend is 12V. // The hotend assembly is equipped with 100Kohm thermistor, heat sink cable; // All metal design, no PTFE in hot zone - capable of printing high temperature melting point plastics such as nylon and polycarbonate. Using the latest technology stainless steel, working hours up to several hundred hours, strong wear resistance. // Voltage:12V, The extruder is direct drive with very little or no room for the filament to wiggle after being pushed into the hotend. // After Sales Guarantee: each one defective item can have the free replace or refund, need more help please feel free to contact us, we will try our best to assist you. // 1 x hot end ki...
  • E3d V6 Extra Boquilla 1.75mm x 0.30mm De Alta Resolucion
    Precio:  $3,969.00

    E3d V6 Extra Boquilla 1.75mm x 0.30mm De Alta Resolucion

    -Titulo Original : E3D v6 Extra Nozzle - 1.75mm x 0.30mm High Resolution (V6-NOZZLE-175-300) -Fabricante : E3D -Descripcion Original: 16" (15. 6" Viewable) Display, 200 cd/M2 Brightness, 16: 9 aspect ratio. Max Resolution 1366 x 768, 500: 1 contrast ratio, 8ms response time // Multiple USB monitors can be simultaneously connected to a single laptop to function as a multi-monitor PC or Mac. Simply installing Display Link software on the PC or Mac allows you to easily add multiple USB monitors for external displays without unnecessary extra hardware // Usb-powered (no power cable required) with USB 3. 0 technology. // Foldable flexi-stand for portrait or landscape view in Auto-pivot mode // Ultra slim design for Easy carry on-the-go for business presentations and frequent travelers, and case is included. Refresh rate: 60Hz // Compatible with Windows 10 but with only display Link drivers // Style:  |  Pattern Name: Product Description The I1659FWUX USB powered portable LED backlit monitor is a must-have laptop or desktop accessory. The widescreen monitor receives both power and signal via a single USB 3. 0 cable for plug-and-play connection; it does not require a power cord or VGA cable, and comes with a foldable flexi-stand for maximum flexibility. What's in the Box15. 6 Monitor, USB 3. 0 Cable, Carry Case, QSG Amazon.com AOC e1659Fwu 16-Inch Class USB-Powered Monitor Key Features Slimmer design USB 3.0 connection for high transfer rates and high quality image Brighter panel with brightness control VESA 75mm wall mount compliant Carry case included VESA wall mount compatible. Sleeker Design, Faster Connections The improved USB monitor from AOC is sleeker in design and faster with its USB 3.0 connection. The USB 3.0 achieves high transfer rates with its total of six wires in the data cable, and delivers high quality images. Designed with a piano-black glossy finish, this USB monitor has a 15.6 diagonally viewable image. The e1659Fwu offers a 500:1 contrast ratio, 5ms response time, and a 1366 x 768 resolution at 60Hz. The e1659Fwu USB Monitor has a foldable flexi-stand for viewing in landscape or portrait mode. Landscape mode is ideal for presentations and Excel sheets, while the Portrait mode conveniently gives you an easy vertical view of your instant messaging program, or sidebars such as search results. This monitor has the unique auto-pivot feature that automatically adjusts the image according to the display's orientation, so you will never have to change settings as you switch between landscape and portrait mode. Thinner, Lighter, Portability at its Best It's ultra lightweight and slim for great portability, making it perfect for business presentations, the frequent traveler, photo frame applications, and dual monitor setups on-the-go. The e1659Fwu USB Monitor is the solution for the frequent traveler who needs to pack multiple displays, as it easily fits into a backpack or the carry case that comes with the USB monitor. You gave your feedbacks and we have heard you! The e1659Fwu USB Monitor comes with VESA 75 x 75 mm Mount Compliant feature, allowing you to easily mount the USB monitor to any wall as long as you have the right wall mount arm and bracket. Built-in DisplayLink Technology for Multiple USB Monitors Connection If necessary, multiple USB monitors can be simultaneously connected to a single laptop to function as a multi-monitor PC or Mac, thanks to the built-in DisplayLInk USB graphics. Simply installing DisplayLInk software on the PC or Mac allows you to easily add multiple USB monitors for external displays without unnecessary extra hardware. The e1659Fwu USB Monitor gives you multiple external displays for your laptop without any complications. Tech Specifications Panel: TFT Active Matrix LCD Viewable Image Size: 15.6 Aspect Ratio: 16:9 Brightness: 200 cd/m2 Contrast Ratio: 500:1 Response Time: 8ms Viewable Angle: 90 degrees horizontal, 45 degrees vertical Optimum Resolution: 1366 x 768 @60Hz Colors Supported: 16.7 Million Connectors: USB 3.0 Power Source: USB 3.0 powered Windows 8 Compatible: Yes More Info Download datashee...
  • Ender 3 3d Impresora Calentador Bloque Cubierta De Silicona
    Precio:  $1,959.00

    Ender 3 3d Impresora Calentador Bloque Cubierta De Silicona

    -Titulo Original : Ender 3 3D Printer Heater Block Silicone Cover MK7/MK8/MK9 Hotend for Creality Ender 3, Ender 5, Ender 3 Pro, CR-10,10S,S4,S5 ANET A8 and Extruder Nozzle 0.4mm Print Head for Mk8 Makerbot-Fabricante : SKOPHY-Descripcion Original: Made of non-stick silicone material // Helps to keep the hotend temperature extremely stable // Can extend the life of the heater block and extruder by keeping it cleaner // High temperature resistance: 280℃ // Professional for 3D printer extruder // Material:Silicone Color: Black Item Weight: 2g Item Size: 22 x 22 x 15mm/ 0.66 * 0.66 * 0.6in (approx.) 3 x Silicone Cover 3 x Extruder Nozzle 0.4mm Skophy are devoted to offer premium quality products to all cherished customers. Meanwhile supply 45 days money back guarantee and 18 months warranty. If there are any questions, please feel free to contact us, Skophy Customer Service Team will spare no efforts to assist with you within 24 hours...
Mostrar del 1 al 24 (de 194 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]