Arriba

Impresión > Impresión 3D > Picos Nozzle

Mostrar: 
Mostrar del 1 al 24 (de 199 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Impresora 3d Extrusora Hot End Mk7 Mk8 Boquilla 0.4mm Montad
    Precio:  $2,729.00
    Expira: 11/06/2021

    Impresora 3d Extrusora Hot End Mk7 Mk8 Boquilla 0.4mm Montad

    -Titulo Original : 3D Printer Extruder Hot End MK7 MK8 Nozzle 0.4mm Assembled 1.75mm Filament Direct Feed 12V Prusa i3 Eewolf-Fabricante : EEWOLF-Descripcion Original: APPLICATION: extruder for 3D printer prusa i3 diy kit // BRASS NOZZLE SIZE: 13mm*6mm // TUBE INNER DIAMETER: 2mm / Length: 30mm // MATERIAL: Stainless Steel Brass aluminum // PACKAGE INCLUDE: Assembled extruder (nozzle, tube, heat block, thermistor, heater and M6 nut) // 3D Printer Extruder Hot End Nozzle 0.4mm Assembled 1.75mm Filament 12V Direct Feed Eewolf Specification for Extruder Tube: Material : Stainless Steel Outer Thread : M6 Inner Diameter : 2mm Length : 30mm Filament Diameter : 1.75mm Specification for Extruder Brass Nozzle Nozzle: 0.4mm Input Diameter: 1.75mm Output Diameter: 0.4mm Material: copper (brass) Size: 13mm*6mm Thermistor: 100K ohm NTC Heater: 12V 40W Heat block: Material: Aluminum (20*20*10mm) Warning!! Small parts, keep away from children...
  • Boquilla Micro Swiss resistente al desgaste para LulzBot 0.3
    Precio:  $5,439.00

    Boquilla Micro Swiss resistente al desgaste para LulzBot 0.3

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle for LulzBot TAZ 5, TAZ 6, LulzBot Mini, Hexagon Hotend .3mm-Fabricante : MICRO-SWISS-Descripcion Original: Nozzle for LulzBot TAZ 5, LulzBot TAZ 6, LulzBot Mini, Hexagon Hotend // Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // 3mm Filament // Orifice size: .3mm // Made in USA by Micro Swiss // This is Plated Wear Resistant Nozzle for LulzBot TAZ 5, TAZ 6, LulzBot Mini, Hexagon Hotend M6 thread, 3mm Filament. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Aokin Mk8 Boquilla Para Printer 3d 24 Un. M6 Bronce Extruder
    Precio:  $3,739.00

    Aokin Mk8 Boquilla Para Printer 3d 24 Un. M6 Bronce Extruder

    -Titulo Original : Aokin MK8 Nozzle for 3D Printer, 24Pcs M6 Brass Extruder Head Hotend Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm & 5pcs Cleaning Needles fit 1.75mm Filament Makerbot Creality CR-10 ANET A8-Fabricante : AOKIN-Descripcion Original: Compatibility: This printer nozzles are compatible with Anet A8, Creality CR-10, Tevo Tarantula, MK8 makerbot, duplicator, prusa i3 and reprap printer. // Material and Size: These printer nozzle are made of brass, Out Thread: M6, Filament Diameter: 1.75mm, Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm. // Nozzle Cleaning Needles: 5 pieces cleaning needles have 5 different size: 0.2 mm, 0.3 mm, 0.4mm, 0.6mm and 0 .8mm, suitable for cleaning most of your 3D Printer nozzles. // Premium Quality: The cleaning needles are made of high quality stainless steel, flexible, sturdy and durable. With a handle, you can twist the drill when using. // Note: After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts. // Color: Material: Brass Compatibility: Anet A8, Creality CR-10, Tevo Tarantula, MK8 makerbot, duplicator, prusa i3 and reprap printer Out Thread: M6 Filament Diameter: 1.75mm Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Material: Stainless steel Bit diameter: 0.2mm 0.3mm 0.4mm 0.6mm 0.8mm Free box: Convenient for collecting the cleaning kit 3x 0.2mm Printer Extruder Nozzle 3x 0.3mm Printer Extruder Nozzle 6x 0.4mm Printer Extruder Nozzle 3x 0.5mm Printer Extruder Nozzle 3x 0.6mm Printer Extruder Nozzle 3x 0.8mm Printer Extruder Nozzle 3x 1.0mm Printer Extruder Nozzle 1 x 0.2mm cleaning needle 1 x 0.3mm cleaning needle 1 x 0.4mm cleaning needle 1 x 0.6mm cleaning needle 1 x 0.8mm cleaning needl...
  • 22 Boquillas Mk8 Para Cr-10 Anet A8 Cr-10 M6 De 0.2 A 1.00mm
    Precio:  $4,069.00

    22 Boquillas Mk8 Para Cr-10 Anet A8 Cr-10 M6 De 0.2 A 1.00mm

    -Titulo Original : 22pcs 3D Printer Nozzles,MK8 Brass Extruder Nozzle Print Head and 7pcs Cleaning Needles for 1.75mm Makerbot Creality CR-10 ANET A8 CR-10 M6 3D Printer. (0.2mm,0.3mm,0.4mm,0.5mm,0.6mm,0.8mm,1.0mm)-Fabricante : WedFeir-Descripcion Original: Specification: Color: gold Material: brass Output diameter: 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm, 1.0 mm Input diameter: 1.75 mm Screw thread: M6 Quantity: 29pcs Package Included: 2 x 0.2 mm 3D printer nozzles 2 x 0.3 mm 3D printer nozzles 10 x 0.4 mm 3D printer nozzles 2 x 0.5 mm 3D printer nozzles 2 x 0.6 mm 3D printer nozzles 2 x 0.8 mm 3D printer nozzles 2 x 1.0 mm 3D printer nozzles 1 x 0.2mm cleaning needle 1 x 0.3mm cleaning needle 1 x 0.4mm cleaning needle 1 x 0.5mm cleaning needle 1 x 0.6mm cleaning needle 1 x 0.8mm cleaning needle 1 x 1.0 mm cleaning needl...
  • Kweiny Mk10 Hotend Kit Para Printer 3d M7 Bronce Boquilla Y
    Precio:  $5,769.00

    Kweiny Mk10 Hotend Kit Para Printer 3d M7 Bronce Boquilla Y

    -Titulo Original : Kweiny MK10 Hotend Kit for 3D Printer M7 Brass Nozzle and Throat with PTFE Tube and Aluminum Heater Block Fit with M3 and M4 Thermistor-Fabricante : KWEINY-Descripcion Original: Compatibility: Fit with MK10 Dia 8mm aluminum cooling block, such as FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, FlashForge Finder, FlashForge Inventor, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice maker select plus, Qidi tech, Cocoon Create, etc. // Brass material advantage: The heat conductivity of brass is 7 times as high as that of stainless steel. MK10 hotend structure only allows filament to have little contact with the nozzle. The material of the nozzle must be brass to ensure filament’s temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of stainless steel is so poor, it is unscientific and irrational used on MK10 nozzle; // Improved Version: According to customer feedback, a M3 threaded hole has been added to the aluminum block, making it suitable for both M3 and M4 thermistor; // Quantity and specification: 1 piece MK10 hotend kit, it include these parts: 0.4mm nozzle with M7 thread 1 piece, throat with 1.75mm PTFE tube 1 piece, aluminum heater block 1 piece. For detailed dimensions, please refer to the drawings in the upper left; // Material: Nozzle is brass. Throat is stainless steel. Heater block is aluminium alloy. // Size: MK10 hotend M7 thread aluminum heater block; 0.4mm; 1.75mm; M7; Brass. MK10 hotend M7 thread aluminum heater block, MK10 aluminum cooling block; 1.75mm; lower thread M7, upper diameter φ7.8mm; 26mm; Stainless steel with 2mmX4mm PTFE tube. MK10 M7 nozzle, MK10 M7 throat, φ6mm cartridge heater, M3 or M4 thermocouples; 20mm*20mm*13mm; Aluminium alloy. 1 piece; 1 piece; 1 piece; 1 piece...
  • Boquilla E3D Bronce V6 genuina 1.75 mm x 0.25 mm (BOQUILLA V
    Precio:  $4,539.00

    Boquilla E3D Bronce V6 genuina 1.75 mm x 0.25 mm (BOQUILLA V

    -Titulo Original : Genuine E3D Brass V6 Nozzle - 1.75mm x 0.25mm (V6-NOZZLE-175-250)-Fabricante : E3D-Descripcion Original: Genuine E3D Parts // 0.25mm V6 Brass Nozzles // Modify your 3D printer to print fine details or large parts with E3D's V6 nozzles // These nozzles will fit V6, Lite6, and Titan Aero HotEnds, and are compatible with Prusa 3D printers // The widest selection of high-performance brass nozzles on the market // The widest selection of high-performance brass nozzles on the market, engineered to 3D print perfectly smooth layers. Modify your 3D printer to print fine details or large parts with E3D's V6 nozzles. These nozzles are fully integrated into the E3D ecosystem of 3D printer parts, and are compatible with V6, Lite6, and Titan Aero. Compatible with Prusa 3D printers. Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of retraction. The flat surface tip of the nozzle which flattens down the layer is custom machined to each nozzle size. A small nozzle tip gives you high precision, and a wide nozzle tip assists in the smooth printing of larger layers. All nozzles in the series are now individually identifiable with markings on the flats of the hex head making them even more convenient to work with...
  • 3 protectores de silicona MK8/MK9 CR-10,10S,S4,S5,Ender 3
    Precio:  $2,729.00
    Expira: 23/05/2021

    3 protectores de silicona MK8/MK9 CR-10,10S,S4,S5,Ender 3

    -Titulo Original : Pscco 3pcs Heater Block Silicone Cover Black Protective Case Mk8/mk9 Hotend For Creality Cr-10,10s,s4,s5,ender 3,anet A8,3d Printer Accessories-Fabricante : Pscco-Descripcion Original: MARCADOR DE PUNTAS DOBLES: puntas gemelas amplias y finas para resaltar, dibujar y subrayar con precisión. Los marcadores finos se pueden usar para escribir y enganchar líneas, mientras que los marcadores gruesos son adecuados para dibujar y colorear. 88 COLORES VIBRANTES: los marcadores a base de agua tienen colores brillantes y buena transparencia. El marcador nunca se desvanecerá con el tiempo. Cada color es atractivo, lo que puede agregarle un toque de creatividad y diversión. 88 colores vivos pueden satisfacer todas sus necesidades. REGALO PERFECTO: el juego de rotuladores está equipado con un hermoso estuche negro que es fácil de transportar, viajar y almacenar. También es un regalo de Navidad ideal para niños, adolescentes, adultos, estudiantes, maestros, etc. USOS ILIMITADOS: los marcadores a menudo se usan para pintar en papel de cartulina más apretado o papel recubierto. Además, se puede utilizar en expresiones de arquitectura, interiorismo, diseño industrial y diseño de productos pintados a mano. SEGURO Y NO TÓXICO: 100% seguro para niños a partir de 3 años. Cada marcador no es tóxico. Los marcadores de alcohol de color Vigorfun 88 son permanentes y coloridos con puntas de doble cara. Los rotuladores son atractivos, los colores son brillantes y nunca se desvanecen. Los marcadores se pueden utilizar ampliamente, como papel para tarjetas, papel recubierto, diseño industrial, diseño de productos, etc. No solo pueden dibujar y colorear, sino también resaltar, dibujar y subrayar. Además, son seguros y no tóxicos, un gran regalo para niños, adolescentes y adultos. Caracteristicas Puntas de cincel ancho y punta fina Forma cuadrada del barril Fluido suave Cada marcador tiene su nombre y número de color El juego viene con una tarjeta de color. Todo viene en una hermosa bolsa negra con soporte Especificaciones 1.Marca: Vigorfun 2.Tamaño de los marcadores: 6.9 x 5.5 x 6.7 pulgadas (17.5 x 14 x 17 cm) 3.Marcadores de peso: 3,4 libras (1,56 kg) 4.Color: 88 colores. 5.Paquete: bolsa negra con soporte 6.Ingredientes: 64% de etanol anhidro, 18% de resina, 10% de disolvente negro, 8% de propilenglicol monometiléter 7.Usos: papel, tela, zapatos, artesanías, paredes, vidrio, piedra, madera, etc. CONSEJOS 1. Retirar la tapa no más de una hora. 2. Se recomienda cubrir la tapa inmediatamente después del uso: los marcadores no estarán secos; el color no se mezclará; larga vida útil 3. Si el marcador está seco, cubra la tapa y espere más de diez minutos...
  • PrimaCreator PC NVP 04Bx4 MK8 MK8 Bronce Boquilla 0.4 mm
    Precio:  $8,799.00

    PrimaCreator PC NVP 04Bx4 MK8 MK8 Bronce Boquilla 0.4 mm

    -Titulo Original : PrimaCreator PC-NVP-04Bx4-MK8 MK8 Brass Nozzle 0.4 mm-Fabricante : PRIMACREATOR-Descripcion Original: Premium high-quality nozzle for perfect prints not to be compared with cheap Chinese nozzles made of low end material in old worn machinery. We only use the best // Manufactured with extreme precession tolerance of only 0.01 mm. Quality is controlled in every step of production to ensure a 100 percent perfect nozzle. Each nozzle is cleaned in ultrasonic bath // Brass nozzle is the perfect choice for pla, abs and petg prints. Brass have superb thermal conductivity to ensure stable printer temperature // MK8 style nozzle with M6 thread for 1.75mm filaments - for printers like Creality3D CR-10, Craftbot, Makerbot 1/2/2x, BQ etc. // What you get: 4 x 0.40Mm - Mk8 brass nozzle (total 4Pcs) // Fits to: MakerBot Replicator 1/2/2x/Replicator 5th Gen/Mini/z18?, CraftBot 2, CraftBot PLUS, BQ Wit box, BQ Prusa I3 Hephestos, Creality CR-10 / CR-10S, Tevo TornadoThe premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. All nozzles from PrimaCreator are made from the best high-quality brass or steel (depending on type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than ± 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints. For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it's time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don't get the same results. After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation. The nozzle will now take shape with millimeter precision, the tolerance is less than ± 0.01 mm. The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. The nozzles are then checked for one last time and packed individually in a protective box ready to be shipped to you...
  • Impresora 3D Boquilla Kit de limpieza Kit para impresión 3D
    Precio:  $9,159.00

    Impresora 3D Boquilla Kit de limpieza Kit para impresión 3D

    -Titulo Original : 3D Printer Nozzle Cleaning Tool Kit for 3D Printing at Home 0.4mm Flexible Needles, Palette Knife, Deburr Tool, Tweezers, File, Storage Bag (15 Piece Set)-Fabricante : DOG RIVER TOOLS-Descripcion Original: BEST 3D PRINTER STARTER PACK: To get the most out of your 3D printer, you need to be armed with the right tools for the job. This 15 piece set includes the top essentials you will need for print removal, nozzle cleaning, clean up, finishing, maintenance and storage by Dog River Tools // PREMIUM QUALITY: Our 0.4mm flexible cleaning needles are made of a high grade material that are flexible and will bend as you need them too but will not break. The precision curved tweezers are easy to use while plucking oozing filament from the extruder nozzle before it starts printing (which means no more burnt fingers) // GREAT VALUE: 15 Piece kit includes: - 5 pc 0.4mm flexible cleaning needles for nozzle in storage tube – 1 pc premium stainless steel spatula with semi flexible blade and rubberized handle – 1 pc Deburr tool with 2 different tips – 1 pc Precision curved tweezers – 1 pc File with 1 round and 1 flat side – 5 pc PTFE Grease packets – 1 pc Zippered nylon tool storage pouch // COMPATIBLE WITH TOP BRANDS: Compatible with popular brands with a 0.4mm nozzle, CR-10, CR10, Ender 2, Ender 3, Anet A8, Tarantula, Tevo, LulzBot , E3D, MK8, MK10, RepRap, E3D, V6, Volcano, Prusa i3 // TRUSTED BRAND: Dog River Tools focuses on making the most innovative and highest quality 3D printing tools and accessories available. Because we are so confident that you will Love and benefit from using our tools we include a limited lifetime guarantee on all our products // This kit is a collection of some of the most common 3D printing tools, helping your maintain your printer, deal with nozzle jams, remove prints from the build surface and clean up the prints after they are complete. 5 pc - 0.4mm Flexible Cleaning Needles for Nozzle and Storage Tube 1 - Premium Spatula with Semi Flexible Blade and Rubberized Handle 1 - with 2 Different Tips 1 - Precision Curved Tweezers 1 - File with 1 Round and 1 Flat Side 5 pc - PTFE Grease Packets 1 - Zippered Nylon Tool Storage Pouch C with all brands that have a 0.4mm nozzle, CR-10, CR10, Ender 2, Ender 3, Anet A8, Tarantula, Tevo,  , E3D, MK8, MK10, RepRap, E3D, V6, Volcano,...
  • Set 30 Boquillas Mk8 Para Impresoras 3d 0.2, 0.3, 0.4, 0.5mm
    Precio:  $2,839.00

    Set 30 Boquillas Mk8 Para Impresoras 3d 0.2, 0.3, 0.4, 0.5mm

    -Titulo Original : 30 Pack 3D Printer Nozzles 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm Print Head with Storage Box for Makerbot Creality CR-10 by Standie-Fabricante : SUCOOL-Descripcion Original: Package include: totally 30 pcs MK8 nozzles in 7 sizes, 3 x 0.2mm, 3 x 0.3mm, 12 x 0.4mm, 3 x 0.5mm, 3 x 0.6mm, 3 x 0.8mm, 3 x 1.0mm // DIAMETER - Input diameter: 1.75mm, output diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm.out thread: M6 // the nozzle extruder are made of high quality brass material, not easy to get rust or erosion,sturdy and durable, providing long servicing life,connect with M6 out thread, easy to install // the 3D printer nozzles are made of brass material,sturdy and durable, connect with M6 out thread, easy to install // the nozzles surfaces are glossy, the chamfers and internal face are rounded and smooth which can reduce the resistance and avoid blocking of the filament, the contact surface can prevent the leakage from the nozzles //...
  • CCTREE 10 un. MK8 Boquilla Extrusora para Printer 3D Makerbo
    Precio:  $3,069.00

    CCTREE 10 un. MK8 Boquilla Extrusora para Printer 3D Makerbo

    -Titulo Original : CCTREE 10pcs MK8 Extruder Nozzle for 3D Printer Makerbot Creality CR-10 Ender 3 5 Different Size 0.2mm, 0.4mm.0.6mm.0.8mm,1.0mm-Fabricante : CCTREE-Descripcion Original: Input Diameter :1.75mm // Output Diameter: 0.2mm,0.4mm,0.4mm.0.6mm.0.8mm,1.0mm // Material: Copper (Brass) // 10Pcs Extruder Brass Nozzle // 5 different size (each size 2pcs) // Specification:13mm*6mm Material: Brass of National standard Weight:2g Nozzle Precision:0.2mm/0.4mm/0.6mm/0.8mm/1.0mm Hexagon Diameter:6mm Screw Thread :M6 Input Diameter: 1.75mm Package Included: 10x nozzles Size:0.2mm,0.4mm,0.6mm,0.8mm,1.0mm Each size 2pc...
  • Zeelo 12 un. Printer 3D Boquilla MK8 Cabezal de impresión ex
    Precio:  $2,899.00

    Zeelo 12 un. Printer 3D Boquilla MK8 Cabezal de impresión ex

    -Titulo Original : Zeelo 12 Pieces 3D Printer Nozzles MK8 Nozzle 0.4mm Extruder Print Head with Free Box for 3D Printer Makerbot Creality CR-10 (Makerbot, Creality, RepRap,etc)-Fabricante : ZEELO-Descripcion Original: Package include: totally 12 pcs MK8 nozzles 12 x 0.4mm // Parameter: input diameter 1.75mm; output diameter 0.4m, mout thread: M6 // Applicability and compatibility: fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer // Premium material: the 3D printer nozzles are made of high quality brass material, sturdy and durable, connect with M6 out thread, easy to install // Attention: small accessories, please keep away from children // Color: gold  Material: brass  Output diameter: 0.4 mm  Input diameter: 1.75 mm  Screw thread: M6  Quantity: 12 pcs  12 x 0.4 mm 3D printer nozzles  1 x Plastic box  Zeelo are devoted to offer premium quality products to all cherished customers. Meanwhile supply 45 days money back guarantee and 18 months warranty.  If there are any questions, please feel free to contact us, Zeelo  Customer Service Team will spare no efforts to assist with you within 24 hours...
  • Kweiny Mk10 Boquilla Para Printer 3d Makerbot Piezas Y Extru
    Precio:  $4,069.00

    Kweiny Mk10 Boquilla Para Printer 3d Makerbot Piezas Y Extru

    -Titulo Original : Kweiny MK10 Nozzle for 3D Printer Makerbot Parts and Extruder Cleaning Tools Kit | M7 Thread 0.4mm Brass Nozzle 5 Pieces and 2PCS Drill Bit for It-Fabricante : KWEINY-Descripcion Original: Brass material advantage: The heat conductivity of brass is 7 times as high as that of stainless steel. MK10 hotend structure only allows filament to have little contact with the nozzle. The material of the nozzle must be brass to ensure filament's temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of stainless steel is so poor, it is unscientific and irrational used on MK10 nozzle. // Compatibility: Fit with MK10 hotend M7 thread aluminum heater block, such as FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, FlashForge Finder, FlashForge Inventor, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice maker select plus, Qidi tech, Cocoon Create, etc. // Quantity and specification: M7 thread 0.4mm nozzle 5 pieces. 0.4mm Nozzle cleaning drill bit 2 pieces. For detailed dimensions, please refer to the drawings in the upper left. // Material: Nozzle is brass. Nozzle cleaning drill bit is stainless steel SUS304. // Durability: Nozzle cleaning drill bit can be used heaps of times, because of SUS304 stainless steel material. It will neither rust nor be broken, no matter how it is used.You only need one to solve all the same size nozzles blockage problems. // 1. After replace the nozzle, Please recalibrate the distance between nozzle and build plate to ensure the quality of print parts; 2. Don't use the needle to clean until the nozzle is heated to above 200℃(392℉).You can twist the needle to make it easier to clean up; 3. Sharp parts, please keep away from children. MK10 hotend M7 thread aluminum heater block; 0.4mm; 1.75mm/3mm; M7; Brass. 0.4mm nozzle; 0.4mm*1PCS, 0.35mm*1PCS; 70mm/2.76in; Stainless steel SUS304. 5 pieces; 2 pieces...
  • Boquilla RepRap M6 resistente al desgaste con revest. 0.2mm
    Precio:  $5,439.00

    Boquilla RepRap M6 resistente al desgaste con revest. 0.2mm

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle RepRap - M6 Thread 1.75mm .2mm (All Printers with a E3D V4 / V5 / V6 1.75 Hotend/Prusa i3 MK2 / MK2S / MK3)-Fabricante : MICRO-SWISS-Descripcion Original: Fits: E3D V5-V6 Hotend with 1.75mm Filament // Plated with TwinClad XT Coating // HIGH LUBRICITY WEAR RESISTANT // Orifice size: .2mm // Made in USA by Micro Swiss // This is RepRap style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • 25 boquillas de impresora 3D MK8 0.4mm para Ender 3 Creality
    Precio:  $3,509.00

    25 boquillas de impresora 3D MK8 0.4mm para Ender 3 Creality

    -Titulo Original : 0.4MM MK8 Ender 3 Nozzles 25 pcs 3D Printer Brass Nozzles Extruder for Makerbot Creality CR-10 with 5 Needles and Metal Storage Box (0.4mm) -Fabricante : Meafeng-Descripcion Original: Parameter and Specifications: Input diameter 2.00mm, Output diameter 0.4 mm, out thread M6, Thread length 4mm; a set of 25pcs printer nozzles and 5 pcs stainless steel needles. And the outer surface is marked with a size, So you can easily identify the specifications of the nozzle. Applicability and Compatibility: Our nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original....
  • Boquilla Micro Swiss resistente al desgaste Boquilla .4mm
    Precio:  $5,439.00

    Boquilla Micro Swiss resistente al desgaste Boquilla .4mm

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle for E3D Volcano Hotend 1.75mm .4mm-Fabricante : MICRO-SWISS-Descripcion Original: Fits: E3D Volcano // Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // 1.75mm Filament // Orifice size: .4mm // Made in USA by Micro Swiss // This is Micro Swiss Plated Wear Resistant nozzle for E3D Volcano hotend. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE codeposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Boquilla MK8 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm
    Precio:  $2,279.00
    Expira: 28/04/2021

    Boquilla MK8 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm

    -Titulo Original : SIQUK 22 Pieces 3D Printer Nozzles MK8 Nozzle 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Storage Box for 3D Printer Makerbot Creality CR-10-Fabricante : SIQUK-Descripcion Original: Package include: totally 22 pcs MK8 nozzles in 7 sizes, 2 x 0.2mm, 2 x 0.3mm, 10 x 0.4mm, 2 x 0.5mm, 2 x 0.6mm, 2 x 0.8mm, 2 x 1.0mm Parameter: input diameter 1.75mm; output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm; out thread: M6 Applicability and compatibility: fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer Premium material: the 3D printer nozzles are made of high quality brass material, sturdy and durable, connect with M6 out thread, easy to install Attention: small accessories, please keep away from childre...
  • Impresora 3D Boquilla Kit de Limpieza Kit 0.4mm 0.35mm Aguja
    Precio:  $3,749.00

    Impresora 3D Boquilla Kit de Limpieza Kit 0.4mm 0.35mm Aguja

    -Titulo Original : 3D Printer Nozzle Cleaning Tool Kit - 0.4mm 0.35mm Needles Tweezers Filament Clog Cleaner Accessories Part Drill Bits 27pcs Mika3D-Fabricante : MIKA3D-Descripcion Original: Great Value: Total 27pcs include: 12pcs 0.4mm stainless steel needles,12pcs 0.35mm copper needles, 2pcs different shape precise tweezers, 1pc plastic bottle, Excellently cleaning 3d printer filament clog // Good Performance Needles: The Needles are flexible, won't break, twist easily, this drill bits will clean your printer nozzles and other small parts: throat, feeder gear perfectly // High Quality Tweezers: It include 2 different shape of precise tweezers, great for nozzle maintenance, cleaning up extruder hot ends and cleaning excess support material (PLA/ABS filament). // Wide Compatible: Widely Compatible with most of 3d printers extruder nozzles from market, E3D, MK8, MK10,etc // Good Package and Warranty: All of 26pcs packed in one safe handy bottle,We are Confident about Product Quality,Within 12 hours response,100% Satisfaction Guarantee //...
  • Micro Swiss Boquilla para All Metal Hotend Kit SOLO A2 Acero
    Precio:  $7,049.00

    Micro Swiss Boquilla para All Metal Hotend Kit SOLO A2 Acero

    -Titulo Original : Micro Swiss Nozzle for All Metal Hotend Kit ONLY A2 Hardened Steel .6mm-Fabricante : MICRO-SWISS-Descripcion Original: Fits: Micro Swiss MK10 All Metal Hotend Kit ONLY (M7 Threads) // A2 Hardened Tool Steel Plated with TwinClad XT // WEAR RESISTANT // Orifice size: .6mm // Made in USA by Micro Swiss // This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit our New MK10 All Metal Hotend. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube. It is made from a A2 Steel and heat treated to 57-62 RC. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • 5 boquillas de impresora 3D MK8 0.4mm para 1.75mm CR-10 A8
    Precio:  $2,799.00

    5 boquillas de impresora 3D MK8 0.4mm para 1.75mm CR-10 A8

    -Titulo Original : uxcell 5pcs 3D Printer Nozzle,Stainless Steel MK8 Nozzle 0.4mm,Extruder Print Head for 1.75mm Makerbot Creality CR-10 ANET A8 CR-10 M6 3D Printer -Fabricante : uxcell -Descripcion Original: [Compatibilidad] Diseñado para iPhone 12/12 Pro 6.1 pulgadas. Se adapta perfectamente a tu teléfono [Protección confiable] Construido con vidrio templado de alta calidad. Protege la pantalla de arañazos y del desgaste diario. Dureza 9H [Alta transparencia] 0,33 mm ultrafino. Alta claridad, alta transparencia y alta sensibilidad al tacto. Asegura el origen de la belleza de la pantalla. [Diseño fácil de usar] Fácil de instalar. Sin burbujas, resistente al agua, antihuellas y antipolv...
  • YOTINO 10 un. Bloque de calentamiento grueso de 3 mm Algodón
    Precio:  $4,419.00

    YOTINO 10 un. Bloque de calentamiento grueso de 3 mm Algodón

    -Titulo Original : YOTINO 10Pcs 3mm Thick Heating Block Cotton 0.24in x 108ft Polyimide Adhesive Kapton Tape for Makerbot 3D Printer Hotend Nozzle-Fabricante : YOTINO-Descripcion Original: - 3mm heat insulation cotton used for 3D printer nozzle heat preservation, keeping the printer heating evenly and work better, improving the quality of the printed matter, save electricity // - Cotton made from ceramic fiber and high temperature film, adhesive tape made from Polyimide // - Heating block cotton and Kapton tape are used on megathermal hotend nozzle, short term resistance to temperature 300 degrees Celsius (572 Fahrenheit ), long term resistance to temperature 180 degrees Celsius (356 Fahrenheit ) // - Cutting the cotton into the proper size and holes as needed, and then use Polyimide tape to firmly stick together // - Heating insulation cotton fits for all 3D printer extruder heater block offered from MK7 MK8 Makerbot RepRap , etc. // Color: Material: cotton and Polyimide Heat insulation cotton: Length 70mm/2.76in, width 20mm/0.79in, thickness 3mm/0.12in Polyimide high temp tape: Total length 30M/108ft, width 6mm/0.24in Feature: heat preservation 10PCS x heating block cotton 1 PCS x Kapton Tape 1. Small parts, keep away from children 2.After replacing the nozzle, recalibrate the distance between the print head and the print plate to ensure the quality of the printed parts 3. The surface temperature of the 3D printer may be very high, being careful not to touch the heating element to prevent injury 4. Do not run the device unattended when the 3D printer is initially runnin...
  • Sindoh RDP14100 AS 3Dwox Dp200 / 1 Boquilla (Dp200 y 3Dwox 1
    Precio:  $50,449.00

    Sindoh RDP14100 AS 3Dwox Dp200 / 1 Boquilla (Dp200 y 3Dwox 1

    -Titulo Original : Sindoh RDP14100-AS 3Dwox Dp200/1 Nozzle (Dp200 and 3Dwox 1 Only)-Fabricante : SINDOH-Descripcion Original: Sindoh // Nozzle // 3Dwox Dp200 3D printer // 3Dwox Dp200/1 nozzle (Dp200 and 3Dwox 1 only). 3Dwox Dp200/1 nozzle helps users build better models with rigid materials such as PLA and ABS...
  • Boquillas Impresora 3d M6 Thread 3mm entrada - 0.4mm salida
    Precio:  $3,289.00

    Boquillas Impresora 3d M6 Thread 3mm entrada - 0.4mm salida

    -Titulo Original : Yootop 10 Pcs Brass E3D V5-V6 Printer Extruder Nozzle M6 Thread 3mm Input Diameter - 0.4mm Output Diameter -Fabricante : Yootop -Descripcion Original: 1) Reemplazo COMPLETO de cartuchos de tinta recargables para Canon PGI-150 CLI-151 o PGI-150XL CLI-151XL, incluye 5 colores (PGI-150XL PG BK, CLI-151XL BK, CLI-151XL C, CLI-151XL M, CLI- 151XL Y) 2) Con chips de reinicio automático / chips recargables. Cuando los datos del chip se agotan por completo, se puede restablecer completamente nuevamente. 3) Compatible para impresoras: impresoras Canon PIXMA IP7210 MG5410 MX721 MX921 MG5510 IX6810 4) Cómo restablecer los chips: cuando el chip se agote por completo y muestre una x en la pantalla, saque el cartucho, llene la tinta aproximadamente al 90% y vuelva a instalarlo nuevamente. Presione el botón de iluminación rojo , entonces la impresora pasará al procedimiento de autolimpieza, por lo que verá que el chip vuelve a funcionar. Durante todo el proceso, mantenga la impresora encendida. 5) Se puede rellenar con tinta colorante muchas veces. 1 juego de cartuchos de tinta recargables = N juegos de cartuchos de tinta compatibles, 90% de ahorro de costos, reducen el 90% de contaminación, protegen la tierra juntos...
  • Boquilla Micro Swiss Plated para LulzBot TAZ 5 LulzBot Mini
    Precio:  $5,439.00

    Boquilla Micro Swiss Plated para LulzBot TAZ 5 LulzBot Mini

    -Titulo Original : Micro Swiss Plated Nozzle for LulzBot TAZ 5, LulzBot Mini, Hexagon Hotend Style .5mm-Fabricante : MICRO-SWISS-Descripcion Original: Nozzle for LulzBot TAZ 5, LulzBot Mini, Hexagon hotend // Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // Upgrade // Orifice size: .5mm // Made in USA by Micro Swiss // Micro Swiss plated nozzle for LulzBot, M6 thread, 3mm Filament, Hexagon hotend. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
Mostrar del 1 al 24 (de 199 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]