Arriba

Impresión > Impresión 3D > Picos Nozzle

Mostrar: 
Mostrar del 1 al 24 (de 198 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Wingoneer Metal J Head V6 Hot End Para Printer 3d 1.75mm Fil
    Precio:  $5,289.00

    Wingoneer Metal J Head V6 Hot End Para Printer 3d 1.75mm Fil

    -Titulo Original : WINGONEER Metal J-Head V6 Hot End for 3D Printer 1.75mm Filament Bowden Extruder 0.4mm Nozzle Kossel Mini Prusa i3-Fabricante : WINGONEER®-Descripcion Original: RepRap 3D printer extruder hotend compatible with V6 1.75mm / 0.4mm // Properly machied, All metal heatbreak. Good for all printing material. // 12V 40W heater, 12V 013A high speed fan with shroud, NTC 3950 pre-wired thermistor // Includes 1 meter long 4mm OD 2mm ID bowden line PTFE tubing // Hotend is equipped with NTC3950 thermistor and 12V 40W heater This hotend is a replica of newest, popular V6 hotend. All metal design, no PTFE in hot zone - capable of printing high temperature melting point plastics such as nylon and polycarbonate. • NTC3950 thermistor temperature table now incuded in Marlin firmware • Small Size: 1.25mmx2.0mm glass bead • High accuracy: 1% • Resistance value at 25°C=100K • Wiring insulation: high temperature teflon/PTFE • Wiring length: 1 meter 1 x Metal J-Head hotend 1.75mm / 0.4mm nozzle / 12V 40W Heater / NTC3950 Thermistor 1 x Heatsink shroud with 12V 0.13A High Speed Fan 3010S 1 x One meter long bowden PTFE/teflon tubing 4mm OD 2mm ID 1 x Pneumatic Straight Fitting to connect to extruder cold en...
  • .2mm Boquilla para Micro Swiss MK10 Kit de actualización de
    Precio:  $5,639.00

    .2mm Boquilla para Micro Swiss MK10 Kit de actualización de

    -Titulo Original : .2mm Nozzle for Micro Swiss MK10 All Metal Hotend Upgrade Kit-Fabricante : MICRO-SWISS-Descripcion Original: Nozzle for Micro Swiss MK10 All Metal Hotend Kit // Nozzle Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // Upgrade for MK10 Exturders // Orifice size: .2mm // Made in USA by Micro Swiss // This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit our MK10 All Metal Hotend Kit. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Aokin Mk8 Boquilla Para Printer 3d 24 Un. M6 Bronce Extruder
    Precio:  $3,879.00

    Aokin Mk8 Boquilla Para Printer 3d 24 Un. M6 Bronce Extruder

    -Titulo Original : Aokin MK8 Nozzle for 3D Printer, 24Pcs M6 Brass Extruder Head Hotend Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm & 5pcs Cleaning Needles fit 1.75mm Filament Makerbot Creality CR-10 ANET A8-Fabricante : AOKIN-Descripcion Original: Compatibility: This printer nozzles are compatible with Anet A8, Creality CR-10, Tevo Tarantula, MK8 makerbot, duplicator, prusa i3 and reprap printer. // Material and Size: These printer nozzle are made of brass, Out Thread: M6, Filament Diameter: 1.75mm, Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm. // Nozzle Cleaning Needles: 5 pieces cleaning needles have 5 different size: 0.2 mm, 0.3 mm, 0.4mm, 0.6mm and 0 .8mm, suitable for cleaning most of your 3D Printer nozzles. // Premium Quality: The cleaning needles are made of high quality stainless steel, flexible, sturdy and durable. With a handle, you can twist the drill when using. // Note: After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts. // Color: Material: Brass Compatibility: Anet A8, Creality CR-10, Tevo Tarantula, MK8 makerbot, duplicator, prusa i3 and reprap printer Out Thread: M6 Filament Diameter: 1.75mm Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Material: Stainless steel Bit diameter: 0.2mm 0.3mm 0.4mm 0.6mm 0.8mm Free box: Convenient for collecting the cleaning kit 3x 0.2mm Printer Extruder Nozzle 3x 0.3mm Printer Extruder Nozzle 6x 0.4mm Printer Extruder Nozzle 3x 0.5mm Printer Extruder Nozzle 3x 0.6mm Printer Extruder Nozzle 3x 0.8mm Printer Extruder Nozzle 3x 1.0mm Printer Extruder Nozzle 1 x 0.2mm cleaning needle 1 x 0.3mm cleaning needle 1 x 0.4mm cleaning needle 1 x 0.6mm cleaning needle 1 x 0.8mm cleaning needl...
  • 22 Boquillas Mk8 Para Cr-10 Anet A8 Cr-10 M6 De 0.2 A 1.00mm
    Precio:  $4,219.00

    22 Boquillas Mk8 Para Cr-10 Anet A8 Cr-10 M6 De 0.2 A 1.00mm

    -Titulo Original : 22pcs 3D Printer Nozzles,MK8 Brass Extruder Nozzle Print Head and 7pcs Cleaning Needles for 1.75mm Makerbot Creality CR-10 ANET A8 CR-10 M6 3D Printer. (0.2mm,0.3mm,0.4mm,0.5mm,0.6mm,0.8mm,1.0mm)-Fabricante : WedFeir-Descripcion Original: Specification: Color: gold Material: brass Output diameter: 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm, 1.0 mm Input diameter: 1.75 mm Screw thread: M6 Quantity: 29pcs Package Included: 2 x 0.2 mm 3D printer nozzles 2 x 0.3 mm 3D printer nozzles 10 x 0.4 mm 3D printer nozzles 2 x 0.5 mm 3D printer nozzles 2 x 0.6 mm 3D printer nozzles 2 x 0.8 mm 3D printer nozzles 2 x 1.0 mm 3D printer nozzles 1 x 0.2mm cleaning needle 1 x 0.3mm cleaning needle 1 x 0.4mm cleaning needle 1 x 0.5mm cleaning needle 1 x 0.6mm cleaning needle 1 x 0.8mm cleaning needle 1 x 1.0 mm cleaning needl...
  • Ender 3 3d Impresora Calentador Bloque Cubierta De Silicona
    Precio:  $3,529.00

    Ender 3 3d Impresora Calentador Bloque Cubierta De Silicona

    -Titulo Original : Ender 3 3D Printer Heater Block Silicone Cover MK7/MK8/MK9 Hotend for Creality Ender 3, Ender 5, Ender 3 Pro, CR-10,10S,S4,S5 ANET A8 and Extruder Nozzle 0.4mm Print Head for Mk8 Makerbot-Fabricante : SKOPHY-Descripcion Original: Made of non-stick silicone material // Helps to keep the hotend temperature extremely stable // Can extend the life of the heater block and extruder by keeping it cleaner // High temperature resistance: 280℃ // Professional for 3D printer extruder // Material:Silicone Color: Black Item Weight: 2g Item Size: 22 x 22 x 15mm/ 0.66 * 0.66 * 0.6in (approx.) 3 x Silicone Cover 3 x Extruder Nozzle 0.4mm Skophy are devoted to offer premium quality products to all cherished customers. Meanwhile supply 45 days money back guarantee and 18 months warranty. If there are any questions, please feel free to contact us, Skophy Customer Service Team will spare no efforts to assist with you within 24 hours...
  • Boquilla E3D Bronce V6 genuina 1.75 mm x 0.25 mm (BOQUILLA V
    Precio:  $4,709.00

    Boquilla E3D Bronce V6 genuina 1.75 mm x 0.25 mm (BOQUILLA V

    -Titulo Original : Genuine E3D Brass V6 Nozzle - 1.75mm x 0.25mm (V6-NOZZLE-175-250)-Fabricante : E3D-Descripcion Original: Genuine E3D Parts // 0.25mm V6 Brass Nozzles // Modify your 3D printer to print fine details or large parts with E3D's V6 nozzles // These nozzles will fit V6, Lite6, and Titan Aero HotEnds, and are compatible with Prusa 3D printers // The widest selection of high-performance brass nozzles on the market // The widest selection of high-performance brass nozzles on the market, engineered to 3D print perfectly smooth layers. Modify your 3D printer to print fine details or large parts with E3D's V6 nozzles. These nozzles are fully integrated into the E3D ecosystem of 3D printer parts, and are compatible with V6, Lite6, and Titan Aero. Compatible with Prusa 3D printers. Compatible with any 3D printers that use the E3D V6 ecosystem (M6 thread), including Prusa i3 and i3 MK2 3D printers. The internal geometry of V6 Nozzles is optimised to reduce back-pressure, ensuring a smooth, easy flow of filament while improving the effectiveness of retraction. The flat surface tip of the nozzle which flattens down the layer is custom machined to each nozzle size. A small nozzle tip gives you high precision, and a wide nozzle tip assists in the smooth printing of larger layers. All nozzles in the series are now individually identifiable with markings on the flats of the hex head making them even more convenient to work with...
  • Filamento Sindoh 3DWOX Recarga DP200 ABS Azul 1.75mm 700gr
    Precio:  $12,099.00

    Filamento Sindoh 3DWOX Recarga DP200 ABS Azul 1.75mm 700gr

    -Titulo Original : Sindoh 3dwox Refill Filament Abs Blue (compatible With Dp200, 3dwox 1, 1x, 2x) , Spool , 1.75 Millimeters Diameter, Model Number: 3dp200abl-r-Fabricante : Sindoh-Descripcion Original: MARCADOR DE PUNTAS DOBLES: puntas gemelas amplias y finas para resaltar, dibujar y subrayar con precisión. Los marcadores finos se pueden usar para escribir y enganchar líneas, mientras que los marcadores gruesos son adecuados para dibujar y colorear. 88 COLORES VIBRANTES: los marcadores a base de agua tienen colores brillantes y buena transparencia. El marcador nunca se desvanecerá con el tiempo. Cada color es atractivo, lo que puede agregarle un toque de creatividad y diversión. 88 colores vivos pueden satisfacer todas sus necesidades. REGALO PERFECTO: el juego de rotuladores está equipado con un hermoso estuche negro que es fácil de transportar, viajar y almacenar. También es un regalo de Navidad ideal para niños, adolescentes, adultos, estudiantes, maestros, etc. USOS ILIMITADOS: los marcadores a menudo se usan para pintar en papel de cartulina más apretado o papel recubierto. Además, se puede utilizar en expresiones de arquitectura, interiorismo, diseño industrial y diseño de productos pintados a mano. SEGURO Y NO TÓXICO: 100% seguro para niños a partir de 3 años. Cada marcador no es tóxico. Los marcadores de alcohol de color Vigorfun 88 son permanentes y coloridos con puntas de doble cara. Los rotuladores son atractivos, los colores son brillantes y nunca se desvanecen. Los marcadores se pueden utilizar ampliamente, como papel para tarjetas, papel recubierto, diseño industrial, diseño de productos, etc. No solo pueden dibujar y colorear, sino también resaltar, dibujar y subrayar. Además, son seguros y no tóxicos, un gran regalo para niños, adolescentes y adultos. Caracteristicas Puntas de cincel ancho y punta fina Forma cuadrada del barril Fluido suave Cada marcador tiene su nombre y número de color El juego viene con una tarjeta de color. Todo viene en una hermosa bolsa negra con soporte Especificaciones 1.Marca: Vigorfun 2.Tamaño de los marcadores: 6.9 x 5.5 x 6.7 pulgadas (17.5 x 14 x 17 cm) 3.Marcadores de peso: 3,4 libras (1,56 kg) 4.Color: 88 colores. 5.Paquete: bolsa negra con soporte 6.Ingredientes: 64% de etanol anhidro, 18% de resina, 10% de disolvente negro, 8% de propilenglicol monometiléter 7.Usos: papel, tela, zapatos, artesanías, paredes, vidrio, piedra, madera, etc. CONSEJOS 1. Retirar la tapa no más de una hora. 2. Se recomienda cubrir la tapa inmediatamente después del uso: los marcadores no estarán secos; el color no se mezclará; larga vida útil 3. Si el marcador está seco, cubra la tapa y espere más de diez minutos...
  • 14 un. Printer 3D M6 Boquilla Extrusora 0.4mm Bronce Boquill
    Precio:  $3,179.00

    14 un. Printer 3D M6 Boquilla Extrusora 0.4mm Bronce Boquill

    -Titulo Original : 14 Pcs M6 3D Printer Nozzle 0.4mm Extruder Brass Nozzle Print Head-Fabricante : KULANNDER-Descripcion Original: Good Design: The hole of 3D print nozzle is consistent size and machining, the threads is clean and well formed. The size is clear stamped on the nozzles. // Compatibility: Compatible with all 1.75mm ABS/ PLA 3D printer, work well with Monoprice select mini, V5 V6, Prusa i3, Anet8, Anycubic i3 mega, etc. // Replacement Nozzle: The 0.4mm M6 3D printer nozzle is a good back up or emergenices when the stock nozzle clog, our brass nozzles produce consistent printing and no clog, give you a smooth and clean printing. // Brass Material: The extruder brass nozzle print head is made of durable and solid brass material, not easy get rust or erosion, provide long serivice life. // Quantity: Package include 14pcs nozzle print head, out diameter: 0.4mm. // Step 1: Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280). Step 2: After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out. Step 3: Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight. Type: Extruder Brass Nozzle Print Head Material: Brass Compatibility: Compatible with all 1.75mm ABS/ PLA 3D printer, work well with Monoprice select mini,Prusa i3, Anet8, Anycubic i3 mega, etc. Installation: external M6 thread connection Out Thread: M6 Filament Diameter: 1.75mm Output Diameter:0.4mm Small parts, please keep away from children. 14 x 0.4mm nozzle print hea...
  • PrimaCreator PC NVP 04Bx4 MK8 MK8 Bronce Boquilla 0.4 mm
    Precio:  $8,609.00

    PrimaCreator PC NVP 04Bx4 MK8 MK8 Bronce Boquilla 0.4 mm

    -Titulo Original : PrimaCreator PC-NVP-04Bx4-MK8 MK8 Brass Nozzle 0.4 mm-Fabricante : PRIMACREATOR-Descripcion Original: Premium high-quality nozzle for perfect prints not to be compared with cheap Chinese nozzles made of low end material in old worn machinery. We only use the best // Manufactured with extreme precession tolerance of only 0.01 mm. Quality is controlled in every step of production to ensure a 100 percent perfect nozzle. Each nozzle is cleaned in ultrasonic bath // Brass nozzle is the perfect choice for pla, abs and petg prints. Brass have superb thermal conductivity to ensure stable printer temperature // MK8 style nozzle with M6 thread for 1.75mm filaments - for printers like Creality3D CR-10, Craftbot, Makerbot 1/2/2x, BQ etc. // What you get: 4 x 0.40Mm - Mk8 brass nozzle (total 4Pcs) // Fits to: MakerBot Replicator 1/2/2x/Replicator 5th Gen/Mini/z18?, CraftBot 2, CraftBot PLUS, BQ Wit box, BQ Prusa I3 Hephestos, Creality CR-10 / CR-10S, Tevo TornadoThe premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. All nozzles from PrimaCreator are made from the best high-quality brass or steel (depending on type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than ± 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints. For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it's time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don't get the same results. After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation. The nozzle will now take shape with millimeter precision, the tolerance is less than ± 0.01 mm. The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. The nozzles are then checked for one last time and packed individually in a protective box ready to be shipped to you...
  • Impresora 3D WINSINN Garganta de corte de calor de titanio t
    Precio:  $7,039.00

    Impresora 3D WINSINN Garganta de corte de calor de titanio t

    -Titulo Original : WINSINN 3D Printer All-Metal Titanium Heatbreak Throat, Compatible with Chimera Kraken Heat Break M6 1.75mm Fit Multi Nozzle Hotend Extruder (Pack of 5Pcs)-Fabricante : WINSINN-Descripcion Original: ✔️TC4 Titanium alloy Material - Ultra-low thermal conductivity // ✔️Works with Chimera Kraken Multi Nozzle Hotend Extruder, Thread: M6 // ✔️Make Sure The Printer Stable Operation. // ✔️The Hole is Very Smooth, Not Clogged, The Printer Works Smoothly // ✔️Made by WINSINN // Color: ►Material: High quality TC4 Titanium ►Works with Chimera Kraken Multi Nozzle Hotend Extruder ►Thread: M6 ►For 1.75mm Filament --------------------------------------------------------------------------------------------------------------------- Package include: ►5 x TC4 titanium alloy HeatBreak --------------------------------------------------------------------------------------------------------------------- -WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply -If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours...
  • Aokin 13 un. Printer 3D Boquilla Kit de Limpieza 10 un. Limp
    Precio:  $2,579.00

    Aokin 13 un. Printer 3D Boquilla Kit de Limpieza 10 un. Limp

    -Titulo Original : Aokin 13 Pcs 3D Printer Nozzle Cleaning Kit - 10 Pcs 0.4mm Needles Cleaner and 2 Pcs Tweezers Cleaner, Stainless Steel Nozzle Cleaning Tool Kit-Fabricante : AOKIN-Descripcion Original: Package Included: 10 Pcs 0.4mm 3D printer nozzle cleaning needles in a bottle and 2 Pcs tweezers with straight and curved shape tip. // Compatibility: fit for most of the 3D Printer extruder 0.4mm nozzles, such as MakerBot, RepRap, Creality CR-10, Ender 3, Prusa I3, Anet A8, E3D, MK8, MK10 etc. // Material: the needles and tweezers are made of high-quality stainless steel material. The needles are sturdy, durable and flexible, easy to bend but not broken. The tweezers tip are sharp, non-slip, anti-static, non-magnetic, easy handling control. // Versatile: the 3D printer cleaning needles also can use for cleaning other small parts, such as throat and feed gears. The 2 different shape precision tweezers are perfect for nozzle maintenance and cleaning excess support material, such as feeder gear teeth and other hard to reach areas. // Aokin 3D printer accessories use high quality raw materials and fine workmanship, If you have any question for our product, please feel free to contact us, we will do our best for you. // Material: stainless steelNeedle:Length of shank: 3 cmNeedle total length: 8 cmNeedle diameter: 0.4 mmTweezer:Angled tweezer length:12 cmStraight tweezer length: 14 cm2 x tweezers10 x 0.4mm cleaning needles in a bottleDon't use the needles to clean until the nozzle is heated over 200 degrees.  The nozzle cleaning needles and tweezers tip are sharp, please keep them away from children. ...
  • Impresora 3D Boquilla + 4 herramientas de bricolaje para J H
    Precio:  $4,229.00

    Impresora 3D Boquilla + 4 herramientas de bricolaje para J H

    -Titulo Original : 3D Printer Nozzles + 4 DIY Tools for J-Head E3D V5 V6 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm Nozzle Tool for Nozzle Replacement, Spanner, Installation Tools …-Fabricante : BIAOBIAO-Descripcion Original: No more burnt fingers for you! This is a must have tool for changing print nozzles. Having the right tools makes all the difference in the world! // Multi-size High-precision extruder nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm // Compliant all M6 thread 3D printer: The nozzles used M6 thread, same as MK8 MK7 UM2 CR10 etc. // Special tools: special spanner and multi-function screwdriver can help you adjustment 3D Printer and change extruder nozzle more easy! // Note: Screwdriver maybe rust, but No effect on use. Spanner only fit for E3D heat block (20*16mm and 16*16mm) // This is High-precision extruder nozzle produce by CNC. High quality brass with M6 thread, compliant with all M6 thread 3D printer. Special tools make you change extruder nozzle FAST, SAFE and EASY. NOTICE: This spanner only for E3D heat blocks -(16*16mm & 20*16mm), it will not work with MK8 block (20*20mm) Turn on 3D Printer, set nozzle temperature to target (PLA: 80-220, ABS: 240-280). After heat done, use SPANNER to hold heat block, use Socket screwdriver to screw old nozzle out. old nozzle will be very hot, don't touch by hands!!! Put new nozzle to this socket screwdriver, spanner keep to hold heat block, screw nozzle in, must be tight and it is done. 0.2mm extruder nozzle * 1pc 0.3mm extruder nozzle * 1pc 0.4mm extruder nozzle * 2pcs 0.5mm extruder nozzle * 1pc 0.6mm extruder nozzle * 1pc 0.8mm extruder nozzle * 1pc Simple spanner * 1pc 3 in 1 screwdriver(1 Handle with 2 Heads) * 1p...
  • Kossel Delta Z axis Printer 3D Sonda Z de alta precisión Kit
    Precio:  $4,879.00

    Kossel Delta Z axis Printer 3D Sonda Z de alta precisión Kit

    -Titulo Original : Kossel Delta Z axis 3D Printer High Precision Z-Probe Auto Bed Leveling Sensor kit 3D Touch Sensor for V6 nozzles and MK8 nozzles Hotend-Fabricante : POLISI3D-Descripcion Original: IMPORTANT! Please make sure that the nozzle and bed is cool down to room temperature before mount the sensor.The sensor will be destoryed if the nozzle temperature is too high // Can be used with any printing surface including Printbite,PEI,Buildtak,Glass,Aluminium,FR4. // Uses a standard endstop connector;Voltage comparator module can provide repeatable and stable single output // Very easy to configure in your firmware,No X or Y offsets,your nozzle is the tool head,so use the nozzle to probe // This product is an auto bed leveling kit using membrane switch technology.Nozzle contact is a direct measurement,the nozzle is the 'sharp end of the tool'.Since there are no x and y offsets(and very minimal z-offset)the whole of the printable area of the bed can be probed.It is light weight and removable will not add any mass to your printhead.The firmware setting is simplest of all the autobed leveling method. // Package: 1 x Voltage comparator PCB module 1 x Endstop Cables 1 x Membrane switch sensor within 1meter conector 2 x Foam ring for mount the sensor to the nozzl...
  • Creality 3d Impresora Actualizacion Extrusora Ensamblada Mk8
    Precio:  $6,699.00

    Creality 3d Impresora Actualizacion Extrusora Ensamblada Mk8

    -Titulo Original : Creality 3D Printer Upgrade Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing for Ender 3/Ender 3 Pro 1.75mm, 0.4mm Nozzle-Fabricante : CCTREE-Descripcion Original: Upgrade Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing // Capricorn PTFE tubing: High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. // Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle // MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W // Suitable For Creality ender 3/ender 3 Pro // Creality 3D Printer Upgrade Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing for Ender 3/Ender 3 Pro 1.75mm - Application: Creality 3D printer ender 3/ender 3 Pro - Nozzle size: 0.4mm - Cable length: 1.2m - Heating Tube: 24V 40W - Operating temperature range: -40~+260°C (-40~+500°F) - Material: Aluminum+Stainless Steel+Brass - Throat length: 52mm - Aluminum block size: approx. 20 x 20 x 10mm Included: 1 x Aluminum Block 1 x Heating Tube 1 x M6*30mm Throat Pipe (Built-in Teflon) 1 x Thermistor +Brass Sleeve 1x 1.75mm 0.4mm Brass Nozzl...
  • Micro Swiss resistente al desgaste .3 mm Robo 3D Boquilla M6
    Precio:  $5,639.00

    Micro Swiss resistente al desgaste .3 mm Robo 3D Boquilla M6

    -Titulo Original : Micro Swiss Plated Wear Resistant .3mm Robo 3D Nozzle - M6 Thread 1.75mm Filament Hexagon (Robo R1/R1 +Plus, Robo C2, Robo R2)-Fabricante : MICRO-SWISS-Descripcion Original: Upgrade nozzle for Robo R1/R1 +PLUS, Robo C2, Robo R2 // Nozzle Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // 1.75mm Filament // Orifice size: .3mm // Made in USA by Micro Swiss // This is Micro Swiss nozzle for Robo 3D Printers, M6 thread, 1.75mm Filament, Hexagon style hotend. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Boquilla De Acero Endurecido E3d Genuino V6 (1.75 Mm) x 0.80
    Precio:  $9,289.00

    Boquilla De Acero Endurecido E3d Genuino V6 (1.75 Mm) x 0.80

    -Titulo Original : Genuine E3D Hardened Steel V6 Nozzle - 1.75mm x 0.80mm (V6-NOZZLE-HS-175-800)-Fabricante : E3D-Descripcion Original: Boquillas endurecidas resistentes a la abrasión para uso prolongado con filamento de 1,75 mm x 0.80 m...
  • Boquilla Micro Swiss resistente al desgaste Boquilla .4mm
    Precio:  $5,639.00

    Boquilla Micro Swiss resistente al desgaste Boquilla .4mm

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle for E3D Volcano Hotend 1.75mm .4mm-Fabricante : MICRO-SWISS-Descripcion Original: Fits: E3D Volcano // Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // 1.75mm Filament // Orifice size: .4mm // Made in USA by Micro Swiss // This is Micro Swiss Plated Wear Resistant nozzle for E3D Volcano hotend. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE codeposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Set Bloque Termico Barral Y Boquilla Para Mk8 Imp. 3D -VG48
    Precio:  $4,699.00

    Set Bloque Termico Barral Y Boquilla Para Mk8 Imp. 3D -VG48

    -Titulo Original : ExcelFu 5pcs 30MM Length Extruder 1.75MM Teflon Throat Tube and 5pcs 0.4MM Brass Extruder Nozzle and 5pcs Heater Blocks Hotend for MK8 Makerbot ANET A8 3D Printer (Bonus: 2pcs hex Key Wrenches)-Fabricante : ExcelFu-Descripcion Original: 5x 3D Printer Nozzle Throat Tube + 5x Nozzle Print Heads + 5x Heater Blocks Hotend + 2x Hex Key Wrenches(for MK8 Makerbot Reprap Prusa I3 3D Printer) Nozzle Throat Tube: Material - Stainless Steel; Outer Thread - M6; Inner Diameter - 2mm; Length - 30mm; Filament Diameter - 1.75mm 0.4mm Extruder Brass Nozzle Print Head: Color - Golden; Material - copper (brass); Size - 5*13mm; Input Diameter: 1.75mm; Output Diameter: 0.4mm Hex Key Wrench: Diameter - 2mm and 3mm; Shape - Hex Compatibility: compatible with all 1.75mm PLA ABS 3D printer, works with Anet A...
  • AJSPOW 20 un. Actualización de la Printer 3D Boquilla Resist
    Precio:  $4,229.00

    AJSPOW 20 un. Actualización de la Printer 3D Boquilla Resist

    -Titulo Original : AJSPOW 20PCS 3D Printer Nozzles | Upgrade Abrasion Resistant 0.4mm MK8 Nozzles | Brass 3D Printer Nozzle for 3D Printer Anet A8 Makerbot Creality CR-10 Ender 3-Fabricante : AJSPOW-Descripcion Original: 【Parameter】Input diameter 1.75mm, out thread: M6. // 【Premium Materials】The 3D printer nozzles are made of high quality brass material, sturdy and durable, brass can be used to print PLA, ABS and most any other non-abrasive materials. // 【Characteristics】MK8 Nozzle through long-term testing to solve the problem of plugging and missing materials to the greatest extent, low thermal conductivity, resistant to corrosion, high abrasion resistance. // 【Applicability and Compatibility】MK8 extruder nozzle fit for 3D printer Makerbot Anet A8, Creality CR-10 CR-10S S4 S5, compatible with all 1.75mm PLA, ABS 3D printer. // 【100%Satisfaction Guarantee】Our team strives for 100% customer satisfaction with manufacturers provided lifetime guarantee. If there are any problems with our products, contact us and we would be very happy to solve your problems. //...
  • Boquilla MK8 resistente al desgaste con revestimiento 0.3
    Precio:  $5,639.00

    Boquilla MK8 resistente al desgaste con revestimiento 0.3

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle MK8 MakerBot, CraftBot, BQ Witbox, BQ Prusa I3 Hephestos .3mm (M2549-03)-Fabricante : MICRO-SWISS-Descripcion Original: Fits: MakerBot Replicator 1, 2 , 2x, Mini, z18 , CraftBot 2, CraftBot PLUS, BQ Witbox, BQ Prusa I3 Hephestos // Plated with TwinClad XT Coating // HIGH LUBRICITY WEAR RESISTANT // Orifice size: .3mm // Made in USA by Micro Swiss // This is MK8 style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Heat Break impresora 3D V6 RepRap Hotend 1.75 mm
    Precio:  $2,699.00

    Heat Break impresora 3D V6 RepRap Hotend 1.75 mm

    -Titulo Original : Sunhokey 5pcs Heat Break Throat with PTFE Lined for V6 RepRap 3D Printer Hotend 1.75mm (Silver-Heat Break Throat 1.75mm) -Fabricante : Sunhokey -Descripcion Original: All metal heat break para V6 Rendimiento estable y duradero Compatible con Hotends de filamento de 1,75 mm Material: Acero inoxidable Diámetro interior: 2 mm para filamento de 1,75 mm ...
  • Impresora 3D FYSETC Robo Parts Original Hexagon Hotend Extru
    Precio:  $10,559.00

    Impresora 3D FYSETC Robo Parts Original Hexagon Hotend Extru

    -Titulo Original : FYSETC 3D Printer Robo Parts Original Hexagon Hotend Extruder Kit All Metal Set with 0.4mm Nozzle 100K Thermistor Heatsink Wire for Robo R1 1.75mm Filament 12V-Fabricante : FYSETC-Descripcion Original: Original Robo Printer DIY parts, replacement accessorie; This hotend is a replica of popular Robo Printer's hotend, but will not work with R2, R2 hotend need 24V, this hotend is 12V. // The hotend assembly is equipped with 100Kohm thermistor, heat sink cable; // All metal design, no PTFE in hot zone - capable of printing high temperature melting point plastics such as nylon and polycarbonate. Using the latest technology stainless steel, working hours up to several hundred hours, strong wear resistance. // Voltage:12V, The extruder is direct drive with very little or no room for the filament to wiggle after being pushed into the hotend. // After Sales Guarantee: each one defective item can have the free replace or refund, need more help please feel free to contact us, we will try our best to assist you. // 1 x hot end ki...
  • Kit De Limpieza + 10 Boquillas 0.4mm Mk8 Para Hellbot Magna
    Precio:  $3,749.00

    Kit De Limpieza + 10 Boquillas 0.4mm Mk8 Para Hellbot Magna

    -Titulo Original : 21 Pieces 3D Printer Nozzle and Cleaning Kit, 10 Pack 0.4 mm MK8 Nozzles, 10 Pack 0.4 mm Needles and 1 Pack Tweezers Tool kit, Stainless Steel Nozzle Cleaning Tool Kit-Fabricante : Leinuosen-Descripcion Original: Boquilla y kit de limpieza: el paquete incluye 10 piezas de agujas de limpieza de boquillas de 0,4 mm embaladas en un recipiente seguro, pinzas puntiagudas de 1 pieza y 10 piezas de boquillas MK8 de 0,4 mm Boquillas MK8 de 10 piezas: el diámetro de entrada de la boquilla de la impresora 3D es 1.75 mm, el diámetro de salida es 0.4 mm y el diámetro del hexágono es 6 mm; Compatible con la impresora 3D Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, Hellbot Magna y apto para todas las impresoras 3D PLA ABS 3D de 1.75 mm Pinzas: las pinzas de impresión 3D son buenas para el mantenimiento de las boquillas y la limpieza del exceso de material de soporte; Es una pinza de precisión curva antiestática, no magnética. Agujas: 10 piezas de agujas flexibles de acero inoxidable de 0,4 mm de diámetro que son buenas para el mantenimiento suave de sus boquillas y lugares difíciles de alcanzar como los engranajes de alimentación Características: la boquilla de la impresora 3D y el kit de limpieza es un kit duradero para varios propósitos; Elimine el exceso de plástico y atascos transparentes con alta precisión, también es bueno para el mantenimiento general de la sección del disipador de calor...
  • PrimaCreator PC NSP 06Hx1 MK8 MK8 Boquilla de acero endureci
    Precio:  $5,129.00

    PrimaCreator PC NSP 06Hx1 MK8 MK8 Boquilla de acero endureci

    -Titulo Original : PrimaCreator PC-NSP-06Hx1-MK8 MK8 Hardened Steel Nozzle 0.6 mm-Fabricante : PRIMACREATOR-Descripcion Original: Premium high-quality nozzle for perfect prints not to be compared with cheap Chinese nozzles made of low end material in old worn machinery. We only use the best // Manufactured with extreme precession tolerance of only 0.01 mm. Quality is controlled in every step of production to ensure a 100 percent perfect nozzle. Each nozzle is cleaned in ultrasonic bath // Hardened steel nozzle perfect for demanding and abrasive filaments like carbon, metal and glow in the dark. With a hardened steel nozzle, you don't have to worry about your nozzle wearing out // MK8 style nozzle with M6 thread for 1.75mm filaments - for printers like Creality3D CR-10, Craftbot, Makerbot 1/2/2x, BQ etc. // What you get: 1 x 0.60Mm - Mk8 hardened steel nozzle // Size:  |  Style: Fits to: MakerBot Replicator 1/2/2x/Replicator 5th Gen/Mini/z18?, CraftBot 2, CraftBot PLUS, BQ Wit box, BQ Prusa I3 Hephestos, Creality CR-10 / CR-10S, Tevo TornadoThe premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. All nozzles from PrimaCreator are made from the best high-quality brass or steel (depending on type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than ± 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints. For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it's time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don't get the same results. After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation. The nozzle will now take shape with millimeter precision, the tolerance is less than ± 0.01 mm. The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. The nozzles are then checked for one last time and packed individually in a protective box ready to be shipped to you...
Mostrar del 1 al 24 (de 198 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]