Arriba

Impresión > Impresión 3D > Picos Nozzle

Mostrar: 
Mostrar del 1 al 24 (de 197 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>] 
  • Impresora 3D Bronce V6 Extra Boquilla 3DMV6 4 un. 1,75 mm 0,
    Precio:  $4,929.00

    Impresora 3D Bronce V6 Extra Boquilla 3DMV6 4 un. 1,75 mm 0,

    -Titulo Original : 3D Printer Brass V6 Extra Nozzle 3DMV6-4Pcs 1.75mm 0.20mm/0.4mm/0.6mm/0.8mm (4pcs 0.2mm)-Fabricante : 3D MATALCHOK-Descripcion Original: We choose the best materials that we can find on market combined with high precision CNC maching to bring this high quality nozzles. // We strictly following the latest drawing to achieve best print result. // The flat surface tip of the nozzle which flattens down the layer is custom machined to each nozzle size.A small nozzle tip gives you high precision,and a wide nozzle tip assists in the smooth printing of larger layers. // A full collection of 3DMV6 Ecosystem nozzles,set in a soft foam cushion for protection.Print all the things in all the resolutions! // Compatible with V5/V6 heating block hotend extruder // Size: We choose the best materials that we can find on market combined with high precision CNC maching to bring this high quality nozzles.We strictly following the latest drawing to achieve best print result.The flat surface tip of the nozzle which flattens down the layer is custom machined to each nozzle size.A small nozzle tip gives you high precision,and a wide nozzle tip assists in the smooth printing of larger layers.All nozzles in the series are now individually identifiable with markings on the flats of the hex head making them even more convenient to work with.See the table on the left for identification.A full collection of 3DMV6 Ecosystem nozzles,set in a soft foam cushion for protection.Print all the things in all the resolutions! 12.5 mm * 7 mm 0.05mm-0.35mm 6mm 0.2/0.4/0.6/ 0.8 mm 1.75mm Filament 4pcs V6 Nozzle...
  • Boquilla Micro Swiss resistente al desgaste .4mm
    Precio:  $4,159.00

    Boquilla Micro Swiss resistente al desgaste .4mm

    -Titulo Original : Micro Swiss MK8 Brass Plated Wear Resistant Nozzle (MakerBot, CraftBot, Creality, CR10, Ender, Tevo Tornado) .8mm-Fabricante : MICRO-SWISS-Descripcion Original: Fits: MakerBot Replicator 1, 2 , 2x, Mini, z18​, CraftBot 2, CraftBot PLUS, BQ Witbox, BQ Prusa I3 Hephestos // Plated with TwinClad XT Coating // HIGH LUBRICITY WEAR RESISTANT // Orifice size: .8mm // Made in USA by Micro Swiss // This is MK8 style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Kit de limpieza de boquillas de impresora 3D de latón MK8 0.
    Precio:  $2,609.00

    Kit de limpieza de boquillas de impresora 3D de latón MK8 0.

    -Titulo Original : 24 Pcs Print Nozzle MK8 Brass 3D Printer Nozzle Cleaning Kit 0.4mm Print Head Nozzle Extruder Headfor 1.75mm-Fabricante : Uspacific-Descripcion Original: caracteristicas Este cortafuegos de metal de 1.75 mm es para V6. Rendimiento duradero y estable. Compatible con Hotends de filamento de 1.75 mm. Especificación: Material: Acero inoxidable Longitud: 22mm Lista de empaque: Garganta totalmente metálica de 5 x 1.75 m...
  • Aokin Mk8 Boquilla Para Printer 3d 24 Un. M6 Bronce Extruder
    Precio:  $2,859.00

    Aokin Mk8 Boquilla Para Printer 3d 24 Un. M6 Bronce Extruder

    -Titulo Original : Aokin MK8 Nozzle for 3D Printer, 24Pcs M6 Brass Extruder Head Hotend Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm & 5pcs Cleaning Needles fit 1.75mm Filament Makerbot Creality CR-10 ANET A8-Fabricante : AOKIN-Descripcion Original: Compatibility: This printer nozzles are compatible with Anet A8, Creality CR-10, Tevo Tarantula, MK8 makerbot, duplicator, prusa i3 and reprap printer. // Material and Size: These printer nozzle are made of brass, Out Thread: M6, Filament Diameter: 1.75mm, Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm. // Nozzle Cleaning Needles: 5 pieces cleaning needles have 5 different size: 0.2 mm, 0.3 mm, 0.4mm, 0.6mm and 0 .8mm, suitable for cleaning most of your 3D Printer nozzles. // Premium Quality: The cleaning needles are made of high quality stainless steel, flexible, sturdy and durable. With a handle, you can twist the drill when using. // Note: After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts. // Color: Material: Brass Compatibility: Anet A8, Creality CR-10, Tevo Tarantula, MK8 makerbot, duplicator, prusa i3 and reprap printer Out Thread: M6 Filament Diameter: 1.75mm Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Material: Stainless steel Bit diameter: 0.2mm 0.3mm 0.4mm 0.6mm 0.8mm Free box: Convenient for collecting the cleaning kit 3x 0.2mm Printer Extruder Nozzle 3x 0.3mm Printer Extruder Nozzle 6x 0.4mm Printer Extruder Nozzle 3x 0.5mm Printer Extruder Nozzle 3x 0.6mm Printer Extruder Nozzle 3x 0.8mm Printer Extruder Nozzle 3x 1.0mm Printer Extruder Nozzle 1 x 0.2mm cleaning needle 1 x 0.3mm cleaning needle 1 x 0.4mm cleaning needle 1 x 0.6mm cleaning needle 1 x 0.8mm cleaning needl...
  • 3d Printer Cooling Fan Extruder Blower Fan Dc 24v 40x10 5...
    Precio:  $2,639.00

    3d Printer Cooling Fan Extruder Blower Fan Dc 24v 40x10 5...

    -Titulo Original : 3D Printer Cooling Fan Extruder Blower Fan DC 24V 40x10 50x15 Fans (1M) Eewolf-Fabricante : EEWOLF-Descripcion Original: Package include: 1pc 50*50*15 fan and 1pc 40*40*10 fan // Each fan has 2 cables. If there is no terminal on the main board, you can cut the connectors off. // Great cooler for hot ends, extruder, prints & other parts on 3D printer. // 24V 3D printer cooling fan // High rotation speed with low noise. 1m in length. // 3D Printer Cooling Fan Extruder Blower Fan DC 24V 40x10 50x15 Fans (1M) Eewolf Each fan has 2 cables. If there is no terminal on the main board, you can cut the connectors off. (Wire length is 1m) Package include: 1pc 50*50*15 fan and 1pc 40*40*10 fan 4010 fan: 24V 0.09A 5015 fan: 24V 0.16A Wire length: 1...
  • Impresora 3D WINSINN Garganta de corte de calor de titanio t
    Precio:  $5,189.00

    Impresora 3D WINSINN Garganta de corte de calor de titanio t

    -Titulo Original : WINSINN 3D Printer All-Metal Titanium Heatbreak Throat, Compatible with Chimera Kraken Heat Break M6 1.75mm Fit Multi Nozzle Hotend Extruder (Pack of 5Pcs)-Fabricante : WINSINN-Descripcion Original: ✔️TC4 Titanium alloy Material - Ultra-low thermal conductivity // ✔️Works with Chimera Kraken Multi Nozzle Hotend Extruder, Thread: M6 // ✔️Make Sure The Printer Stable Operation. // ✔️The Hole is Very Smooth, Not Clogged, The Printer Works Smoothly // ✔️Made by WINSINN // Color: ►Material: High quality TC4 Titanium ►Works with Chimera Kraken Multi Nozzle Hotend Extruder ►Thread: M6 ►For 1.75mm Filament --------------------------------------------------------------------------------------------------------------------- Package include: ►5 x TC4 titanium alloy HeatBreak --------------------------------------------------------------------------------------------------------------------- -WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply -If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours...
  • CCTREE 15 un. Printer 3D Bloque calefactor Algodón con cinta
    Precio:  $2,859.00

    CCTREE 15 un. Printer 3D Bloque calefactor Algodón con cinta

    -Titulo Original : CCTREE 15PCS 3D Printer Heating Block Cotton with Kapton Tape Hotend Nozzle Heat Insulation Cotton for Ultimaker/Makerbot/Creality CR-10-Fabricante : CCTREE-Descripcion Original: Heat preservation, keep the printer heating evenly and work better // You can Punch Holes or Cut fit size to the cotton. // Recommend Safe Working Temperature : <300°C // Cotton Size: 70mm x 20mm x 2mm Kapton:Width 6mm, Lenght:33M // Package including:15PCS x 2mm heating block cotton + 1PCS x 6mm Kapton Tape // Specification Material: cotton Cotton Size: 70mm x 20mm x 2mm Kapton:Width 6mm, Lenght:33M Feature: heat preservation Note: this product only suitable for 3D printer using indoors Attention: Small parts, keep away from children Package including: 15PCS x 2mm heating block cotton 1PCS x6mm Kapton Tape WARNING!! 1.3D printer replacement parts, Always shut off power to the circuit before starting installation work. 2.The surface temperature of the 3D printer might be high, and be careful not to touch the heating element to prevent injury. 3.3D printer initial operation, Do not run the equipment Unattended state. 4.When printing with a PLA(190°C-230°C) or ABS(230°C-250°C)consumable, if the temperature sensor and other accessories fail, it may cause high temperature hazards. Do not run the equipment Unattended state. 5.To ensure the users will use the product safely and properly, Please read your 3D printer manual first and follow the instructions step by step before using the product. 6.Due to the variety of possible end-uses, it is ultimately the responsibility of the customer to determine a product's suitability for a particular application...
  • Boquillas M6 15 piezas 0.2/0.4/0.6/0.8/1.0mm + 5 Agujas
    Precio:  $3,039.00

    Boquillas M6 15 piezas 0.2/0.4/0.6/0.8/1.0mm + 5 Agujas

    -Titulo Original : AFUNTA 15 PCS M6 3D Printer Stainless Steel Nozzles Print Heads Extruder Compatible 1.75mm E-3D Makerbot & ANET A8 & Creality CR-10, 5 Sizes (0.2/0.4/0.6/0.8/1.0mm) + 5 Sizes Cleaning Needles-Fabricante : Afunta-Descripcion Original: NOTA: Después de reemplazar la boquilla, recalibre la distancia entre la boquilla y la placa de construcción para garantizar la calidad de las piezas de impresión. COMPATIBILIDAD: Las boquillas de esta impresora son compatibles con Anet A8, Creality CR-10, Tevo Tarantula, E-3D makerbot, duplicator, prusa i3 y reprap. MATERIAL Y TAMAÑO: Las boquillas de estas impresoras están hechas de acero inoxidable, Rosca exterior: M6, Diámetro del filamento: 1.75 mm, Diámetro de salida: 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm, 1.0 mm. AGUJAS DE LIMPIEZA DE BOQUILLAS: las agujas de limpieza de 5 piezas tienen 5 tamaños diferentes: 0.2 mm, 0.4 mm, 0.6 mm y 0 .8 mm, adecuadas para limpiar la mayoría de las boquillas de su impresora 3D. CALIDAD PREMIUM: las agujas de limpieza están hechas de acero inoxidable de alta calidad, flexible, resistente y duradero. Con un mango, puede girar el taladro cuando lo use...
  • 14 un. Printer 3D M6 Boquilla Extrusora 0.4mm Bronce Boquill
    Precio:  $2,859.00

    14 un. Printer 3D M6 Boquilla Extrusora 0.4mm Bronce Boquill

    -Titulo Original : 14 Pcs M6 3D Printer Nozzle 0.4mm Extruder Brass Nozzle Print Head-Fabricante : KULANNDER-Descripcion Original: Good Design: The hole of 3D print nozzle is consistent size and machining, the threads is clean and well formed. The size is clear stamped on the nozzles. // Compatibility: Compatible with all 1.75mm ABS/ PLA 3D printer, work well with Monoprice select mini, V5 V6, Prusa i3, Anet8, Anycubic i3 mega, etc. // Replacement Nozzle: The 0.4mm M6 3D printer nozzle is a good back up or emergenices when the stock nozzle clog, our brass nozzles produce consistent printing and no clog, give you a smooth and clean printing. // Brass Material: The extruder brass nozzle print head is made of durable and solid brass material, not easy get rust or erosion, provide long serivice life. // Quantity: Package include 14pcs nozzle print head, out diameter: 0.4mm. // Step 1: Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280). Step 2: After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out. Step 3: Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight. Type: Extruder Brass Nozzle Print Head Material: Brass Compatibility: Compatible with all 1.75mm ABS/ PLA 3D printer, work well with Monoprice select mini,Prusa i3, Anet8, Anycubic i3 mega, etc. Installation: external M6 thread connection Out Thread: M6 Filament Diameter: 1.75mm Output Diameter:0.4mm Small parts, please keep away from children. 14 x 0.4mm nozzle print hea...
  • Twotrees J Head V6 Hot End Kit completo 1.75mm 12V RepRap Pr
    Precio:  $2,859.00

    Twotrees J Head V6 Hot End Kit completo 1.75mm 12V RepRap Pr

    -Titulo Original : Twotrees J-Head V6 Hot End Full Kit 1.75mm 12V RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle-Fabricante : TWOTREES-Descripcion Original: 【1】Applicability & compatibility: compatible with all 1.75mm V6 Makerbot 3D printer; NTC connector with terminal, easy to intall. // 【2】Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking . // 【3】Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly . // 【4】Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm . // 【5】Package include: all metal V6 hotend 12v / 40w / 1.75mm / 0.4mm extruder full kit (V6 printhead + fan + fan cover + PTFE tube + pipe fitting), 1 pieces brass extrusion nozzles (1x0.4mm ) and a v6 heating block, a 2-part Teflon tube in the nozzle neck made of stainless steel. //...
  • Creality 3d Impresora Actualizacion Extrusora Ensamblada Mk8
    Precio:  $4,939.00

    Creality 3d Impresora Actualizacion Extrusora Ensamblada Mk8

    -Titulo Original : Creality 3D Printer Upgrade Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing for Ender 3/Ender 3 Pro 1.75mm, 0.4mm Nozzle-Fabricante : CCTREE-Descripcion Original: Upgrade Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing // Capricorn PTFE tubing: High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. // Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle // MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W // Suitable For Creality ender 3/ender 3 Pro // Creality 3D Printer Upgrade Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing for Ender 3/Ender 3 Pro 1.75mm - Application: Creality 3D printer ender 3/ender 3 Pro - Nozzle size: 0.4mm - Cable length: 1.2m - Heating Tube: 24V 40W - Operating temperature range: -40~+260°C (-40~+500°F) - Material: Aluminum+Stainless Steel+Brass - Throat length: 52mm - Aluminum block size: approx. 20 x 20 x 10mm Included: 1 x Aluminum Block 1 x Heating Tube 1 x M6*30mm Throat Pipe (Built-in Teflon) 1 x Thermistor +Brass Sleeve 1x 1.75mm 0.4mm Brass Nozzl...
  • Boquilla para UP resistente al desgaste con recubrimiento Mi
    Precio:  $4,159.00

    Boquilla para UP resistente al desgaste con recubrimiento Mi

    -Titulo Original : Micro Swiss Plated Wear Resistant nozzle for UP Box+ / UP300 / Cetus Extruder / Afinia H800+, H800 & H480-02 (.4mm)-Fabricante : MICRO-SWISS-Descripcion Original: Fits: UP Box+ / UP300 / Cetus Extruder / Afinia H800+, H800 & H480-02 // Nozzle Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // Orifice size: .4mm // Made in USA by Micro Swiss // This nozzle will fit UP Plus, UP Mini and the Up Box manufactured after March 2015. Nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle. **** Please note that this nozzle may not fit on older models of the Mini and Plus 2. **...
  • Impresora 3D Boquilla + 4 herramientas de bricolaje para J H
    Precio:  $2,859.00

    Impresora 3D Boquilla + 4 herramientas de bricolaje para J H

    -Titulo Original : 3D Printer Nozzles + 4 DIY Tools for J-Head E3D V5 V6 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm Nozzle Tool for Nozzle Replacement, Spanner, Installation Tools …-Fabricante : BIAOBIAO-Descripcion Original: No more burnt fingers for you! This is a must have tool for changing print nozzles. Having the right tools makes all the difference in the world! // Multi-size High-precision extruder nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm // Compliant all M6 thread 3D printer: The nozzles used M6 thread, same as MK8 MK7 UM2 CR10 etc. // Special tools: special spanner and multi-function screwdriver can help you adjustment 3D Printer and change extruder nozzle more easy! // Note: Screwdriver maybe rust, but No effect on use. Spanner only fit for E3D heat block (20*16mm and 16*16mm) // This is High-precision extruder nozzle produce by CNC. High quality brass with M6 thread, compliant with all M6 thread 3D printer. Special tools make you change extruder nozzle FAST, SAFE and EASY. NOTICE: This spanner only for E3D heat blocks -(16*16mm & 20*16mm), it will not work with MK8 block (20*20mm) Turn on 3D Printer, set nozzle temperature to target (PLA: 80-220, ABS: 240-280). After heat done, use SPANNER to hold heat block, use Socket screwdriver to screw old nozzle out. old nozzle will be very hot, don't touch by hands!!! Put new nozzle to this socket screwdriver, spanner keep to hold heat block, screw nozzle in, must be tight and it is done. 0.2mm extruder nozzle * 1pc 0.3mm extruder nozzle * 1pc 0.4mm extruder nozzle * 2pcs 0.5mm extruder nozzle * 1pc 0.6mm extruder nozzle * 1pc 0.8mm extruder nozzle * 1pc Simple spanner * 1pc 3 in 1 screwdriver(1 Handle with 2 Heads) * 1p...
  • Anet Disipador de calor del extrusor de aluminio 5PCS, MK7 /
    Precio:  $2,809.00

    Anet Disipador de calor del extrusor de aluminio 5PCS, MK7 /

    -Titulo Original : Anet Aluminium Extruder Heatsink 5PCS, MK7 / MK8 40 x 40 x 11mm Heatsink Cooling Cooler Fin for Anet 3D Printer Extruder Fan-Fabricante : ANET-Descripcion Original: Makerbot Heatsink, use for Anet 3d printer extruder; // Size: 40*40*11mm // Aluminum material, fast heat dissipation; // Chip spacing and neat, larger heat dissipation area; // Surface oxidation treatment, fast heat dissipation, high hardness, beautiful color; // Brand: Anet Product: Makerbot Heatsink Use for: Anet 3d printer Dimensions: 40*40*11mm Size of holes: 31mm quantity: 5PCS Material: aluminum Advantages: 1. aluminum material, fast heat dissipation. 2. Chip spacing and neat, larger heat dissipation area. 3. Surface oxidation treatment, fast heat dissipation, high hardness, beautiful color. 4. High-quality 3d printer accessoried heat sink, original boutique. 5. Environmental protection, safety, harmless. 6. High-quality raw materials, fine workmanship. 7. Strict quality control system, quality assurance...
  • Impresora 3D Boquilla Kit de Limpieza Kit 0.4mm 0.35mm Aguja
    Precio:  $2,599.00

    Impresora 3D Boquilla Kit de Limpieza Kit 0.4mm 0.35mm Aguja

    -Titulo Original : 3D Printer Nozzle Cleaning Tool Kit - 0.4mm 0.35mm Needles Tweezers Filament Clog Cleaner Accessories Part Drill Bits 27pcs Mika3D-Fabricante : MIKA3D-Descripcion Original: Great Value: Total 27pcs include: 12pcs 0.4mm stainless steel needles,12pcs 0.35mm copper needles, 2pcs different shape precise tweezers, 1pc plastic bottle, Excellently cleaning 3d printer filament clog // Good Performance Needles: The Needles are flexible, won't break, twist easily, this drill bits will clean your printer nozzles and other small parts: throat, feeder gear perfectly // High Quality Tweezers: It include 2 different shape of precise tweezers, great for nozzle maintenance, cleaning up extruder hot ends and cleaning excess support material (PLA/ABS filament). // Wide Compatible: Widely Compatible with most of 3d printers extruder nozzles from market, E3D, MK8, MK10,etc // Good Package and Warranty: All of 26pcs packed in one safe handy bottle,We are Confident about Product Quality,Within 12 hours response,100% Satisfaction Guarantee //...
  • Boquilla RepRap M6 resistente al desgaste con revest. 0.25mm
    Precio:  $4,159.00

    Boquilla RepRap M6 resistente al desgaste con revest. 0.25mm

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle RepRap - M6 Thread 1.75mm .25mm (All Printers with a E3D V4 / V5 / V6 1.75 Hotend/Prusa i3 MK2 / MK2S / MK3)-Fabricante : MICRO-SWISS-Descripcion Original: Fits: E3D V5-V6 Hotend with 1.75mm Filament // Plated with TwinClad XT Coating // HIGH LUBRICITY WEAR RESISTANT // Orifice size: .25mm // Made in USA by Micro Swiss // This is RepRap style nozzle, it is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • correa para Creality Ender 3 / Pro, CR10, CR10S, Tronxy X3
    Precio:  $3,279.00

    correa para Creality Ender 3 / Pro, CR10, CR10S, Tronxy X3

    -Titulo Original : WINSINN Upgrade 2020 Profile X-axis Synchronous Belt Straighten Tensioner, Works with Creality Ender 3 / Pro, CR10, CR10S, Tronxy X3 - Black -Fabricante : WINSINN -Descripcion Original: CABLE XLR EQUILIBRADO DE ALTA CALIDAD: ideal para conciertos en vivo, aplicaciones de grabación, conexión de micrófono profesional a una interfaz de audio o mezclador, salidas de mezclador a parlantes y todas las demás necesidades de audio, música y sonido. ESCUDO INTERIOR DE PVC CONDUCTIVO DOBLE: 98% de escudo trenzado Envoltura de hilo de algodón que reduce el ruido y todas las interrupciones de ruido y estática, cancela profesionalmente el zumbido y el ruido mientras mejora la respuesta de alta frecuencia FUNCIONA BIEN PARA LA ILUMINACIÓN DMX: debido a su 98% de escudo trenzado, también funcionará muy bien para aplicaciones de iluminación DMX en presentaciones en vivo, salas de conciertos, escuelas, iglesias, iluminación de estudio y grabación. PUNTOS DE CONTACTO BAÑADOS EN ORO: Alivia la tensión del cable con puntos de contacto chapados en oro, conectores de carcasa de metal negro con conectores autobloqueantes para una conexión estable sin necesidad de preocuparse por la estabilidad del cabl...
  • Micro Swiss HW NOZ MK8 06 Boquillas resistentes al desgaste
    Precio:  $3,959.00

    Micro Swiss HW NOZ MK8 06 Boquillas resistentes al desgaste

    -Titulo Original : Micro-Swiss HW-NOZ-MK8-06 Plated Brass Wear Resistant Nozzles, 1.75 mm, MK8 (Makerbot) 0.6 mm, Bright Nickel-Fabricante : MICRO-SWISS-Descripcion Original: USA made Micro-Swiss Plated Brass Wear Resistant Nozzles extend nozzle life dramatically when using abrasive materials. // Ultra-hard coating creates a low friction nozzle that outlasts uncoated brass. Brass base material retains thermal conductivity for unchanged thermal performance. // Fit a large variety of machines, check listing name carefully to make sure it fits your printer, or get in touch with us if you are unsure. // Easy upgrade for trouble-free printing of hard composites! Our Plated Brass Wear Resistant Nozzles are made from brass for good thermal conductivity and plated with an extremely hard high lubricity coating. The coating increases the life of the nozzle significantly. We have yet to wear out a nozzle! With normal brass nozzles noticeable wear can occur after as little as 500g of Stainless Steel material. Currently available in: 1. MK8 Style (M6 Threads compatible with most Makerbot style machines including the Replicator 1, 2, 2x, 5th gen, Mini & Z18) in 0. 4mm & 0. 6mm diameter orifices - 1. 75mm filament only. 2. MK10 Style (M7 Threads for newer Flash-Forge, Dremel & Wanhao) in 0. 4mm & 0. 6mm diameter orifices - 1. 75mm filament only. 3. Modified MK8 RepRap Style (M6 Threads compatible with E3D (including Big Box), Hexagon (newer Lulzbot & Robo3D) & Ultimakers upgraded with an Olsson block) for 1. 75mm & 2. 85mm filament diameter in 0. 4mm, 0. 6mm & 0. 8mm diameter orifices. 4. Printrbot Ubis Style (for all Printrbots W/O all metal upgrade) in 0. 4mm & 0. 6mm diameter orifices (ignore 0. 2mm marking. . . long story) - 1. 75mm filament only. 5. Afinia/UP! /Zortrax Style in 0. 4mm & 1. 75mm filament only. Larger diameters require more parameter modification, but have slightly more consistent extrusion & increased life over 0. 4mm. Custom manufactured for ProtoPlant, makers of Proto-pasta in the USA by Micro Swiss. contact Proto-pasta for more information...
  • Boquilla Extrusora Mk10 04mm X 1.75mm 20 Unidades
    Precio:  $3,199.00

    Boquilla Extrusora Mk10 04mm X 1.75mm 20 Unidades

    -Titulo Original : Aokin MK10 M7 Nozzle for 3D Printer, 20PCS Brass Extruder Head Hotend Nozzles 0.4mm, fit 1.75mm Filament Wanhao Dupicator D4/I3/Dremel Makerbot-Fabricante : Aokin-Descripcion Original: Product description Color: 20 Pcs M7 MK10 Nozzles 20 Pcs M7 Thread Brass Extruder Head Hotend Nozzle 1.75mm Filament: Material: Brass Out Thread: M7 Filament Diameter: 1.75mm Output Diameter: 0.4mm Only fits printers which use 4mm Teflon tube which might include: Wanhao Duplicator 4 series Flashforge (newer models) FlashForge Creator Pro FlashForge Creator X FlashForge Dreamer Dremel Idea Builder Monoprice Maker Select 3D Printer v2 PowerSpec 3D Pro PowerSpec 3D X Qidi Tech Wanhao Duplicator 4S Wanhao Duplicator 4X Wanhao i3 Cocoon Create 3D Printer Package Includes: 0.4mm Nozzle X 20Pcs Compatibilidad: las boquillas de esta impresora son compatibles con FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Dremel Idea Builder?, PowerSpec 3D Pro?, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice Maker Select 3D Printer v2, Cocoon Create 3D Impresora. El paquete incluye: totalmente 20 piezas x 0. Boquilla extrusora MK10 de 4 mm. Tamaño: las boquillas de la impresora 3D, rosca: M7, diámetro del filamento: 1. 75 mm, diámetro de salida: 0. 4 mm. Material: las boquillas de la impresora 3D están hechas de latón Premium, resistente y resistente a altas temperaturas, seda suave, se conectan con rosca M7, fácil de usar. Nota: después de reemplazar la boquilla, recalibre la distancia entre la boquilla y la placa de construcción para garantizar la calidad de las piezas de impresión...
  • Boquilla Micro Swiss resistente al desgaste .5 mm para Robo
    Precio:  $4,159.00

    Boquilla Micro Swiss resistente al desgaste .5 mm para Robo

    -Titulo Original : Micro Swiss Plated Wear Resistant Nozzle .5mm for Robo 3D - M6 Thread 1.75mm Filament Hexagon (Robo R1/R1 +Plus, Robo C2, Robo R2)-Fabricante : MICRO-SWISS-Descripcion Original: Upgrade nozzle for Robo R1/R1 +PLUS, Robo C2, Robo R2 // Nozzle Plated with TwinClad XT Coating HIGH LUBRICITY WEAR RESISTANT // 1.75mm Filament // Orifice size: .5mm // Made in USA by Micro Swiss // This is Micro Swiss nozzle for Robo 3D Printers, M6 thread, 1.75mm Filament, Hexagon style hotend. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE co-deposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle...
  • Impresora 3D 3 un. Tamaño más grande Extrusora de bronce Mk7
    Precio:  $3,369.00

    Impresora 3D 3 un. Tamaño más grande Extrusora de bronce Mk7

    -Titulo Original : 3qty 3D Printer Larger Size Brass Extruder Mk7 Mk8 Nozzles 1.0mm 1.5mm 2.0mm for 1.75mm Filament (1qty) 1mm Brass Nozzle (1qty) 1.5mm Brass Nozzle (1qty) 2mm Brass Nozzle-Fabricante : DAEWON INDUSTRIES-Descripcion Original: (1qty) 1mm Brass Nozzle // (1qty) 1.5mm Brass Nozzle // (1qty) 2mm Brass Nozzle // Large Print Head Extruder Nozzle for 1.75mm filament ABS/PLA // Mk7 & Mk8 compatible // 1)  (1 quantity) 1.0mm nozzle 2) (1 quantity) 1.5mm nozzles 3) (1 quantity 2.0mm nozzles Mk7 & Mk8 Large Print Head Extruder Nozzle for 1.75mm filament ABS/PLA...
  • 10 Boquillas MK8 0.6mm para Filamento 1.75mm ABS
    Precio:  $2,939.00

    10 Boquillas MK8 0.6mm para Filamento 1.75mm ABS

    -Titulo Original : Lheng 10Pcs Filament nozzles 0.6mm MK8 Print Head for Cr10 Brass Extrude Nozzle Print Head-1.75mm Filament ABS- for 3DPrinter-Fabricante : Lheng-Descripcion Original: Hecho de cobre importado, hilo uniforme, mayor velocidad de fusión y velocidad de impresión. Parámetro: diámetro de entrada 1.75 mm; diámetro de salida 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm, 1.0 mm; hilo de salida: M6. La forma es lisa. El aceite es brillante. No hay rebabas. Las letras son claras y los detalles son de calidad. El achaflanado es redondo y redondo, lo que reduce la resistencia del cofre de agua a los consumibles, evita la seda y se tapa. Aplicabilidad y compatibilidad: apto para la impresora 3D Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible con todas las impresoras 3D PLA ABS 3D de 1.75 mm...
  • Impresora 3D FYSETC Robo Parts Original Hexagon Hotend Extru
    Precio:  $7,529.00

    Impresora 3D FYSETC Robo Parts Original Hexagon Hotend Extru

    -Titulo Original : FYSETC 3D Printer Robo Parts Original Hexagon Hotend Extruder Kit All Metal Set with 0.4mm Nozzle 100K Thermistor Heatsink Wire for Robo R1 1.75mm Filament 12V-Fabricante : FYSETC-Descripcion Original: Original Robo Printer DIY parts, replacement accessorie; This hotend is a replica of popular Robo Printer's hotend, but will not work with R2, R2 hotend need 24V, this hotend is 12V. // The hotend assembly is equipped with 100Kohm thermistor, heat sink cable; // All metal design, no PTFE in hot zone - capable of printing high temperature melting point plastics such as nylon and polycarbonate. Using the latest technology stainless steel, working hours up to several hundred hours, strong wear resistance. // Voltage:12V, The extruder is direct drive with very little or no room for the filament to wiggle after being pushed into the hotend. // After Sales Guarantee: each one defective item can have the free replace or refund, need more help please feel free to contact us, we will try our best to assist you. // 1 x hot end ki...
  • PrimaCreator PC NVP 04Bx4 MK8 MK8 Bronce Boquilla 0.4 mm
    Precio:  $6,729.00

    PrimaCreator PC NVP 04Bx4 MK8 MK8 Bronce Boquilla 0.4 mm

    -Titulo Original : PrimaCreator PC-NVP-04Bx4-MK8 MK8 Brass Nozzle 0.4 mm-Fabricante : PRIMACREATOR-Descripcion Original: Premium high-quality nozzle for perfect prints not to be compared with cheap Chinese nozzles made of low end material in old worn machinery. We only use the best // Manufactured with extreme precession tolerance of only 0.01 mm. Quality is controlled in every step of production to ensure a 100 percent perfect nozzle. Each nozzle is cleaned in ultrasonic bath // Brass nozzle is the perfect choice for pla, abs and petg prints. Brass have superb thermal conductivity to ensure stable printer temperature // MK8 style nozzle with M6 thread for 1.75mm filaments - for printers like Creality3D CR-10, Craftbot, Makerbot 1/2/2x, BQ etc. // What you get: 4 x 0.40Mm - Mk8 brass nozzle (total 4Pcs) // Fits to: MakerBot Replicator 1/2/2x/Replicator 5th Gen/Mini/z18?, CraftBot 2, CraftBot PLUS, BQ Wit box, BQ Prusa I3 Hephestos, Creality CR-10 / CR-10S, Tevo TornadoThe premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print. All nozzles from PrimaCreator are made from the best high-quality brass or steel (depending on type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than ± 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints. For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it's time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don't get the same results. After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation. The nozzle will now take shape with millimeter precision, the tolerance is less than ± 0.01 mm. The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. The nozzles are then checked for one last time and packed individually in a protective box ready to be shipped to you...
Mostrar del 1 al 24 (de 197 productos)
Páginas de Resultados:  1  2  3  4  5 ...  [Siguiente >>]